blob: 337aef69243f1b32a9e5f2eec6bede61bb5d2e78 [file] [log] [blame]
Michael Walsh1b0ceb22017-05-31 16:03:01 -05001*** Settings ***
2Resource ../lib/utils.robot
3Resource ../lib/connection_client.robot
4Resource ../lib/boot_utils.robot
George Keishing58e47232018-02-12 10:35:15 -06005Library ../lib/gen_misc.py
George Keishingbf724772018-02-21 08:57:16 -06006Library ../lib/utils.py
Michael Walsh1b0ceb22017-05-31 16:03:01 -05007
8*** Variables ***
9# MAC input from user.
10${MAC_ADDRESS} ${EMPTY}
11
12
13*** Keywords ***
14
Michael Walsh1b0ceb22017-05-31 16:03:01 -050015Check And Reset MAC
16 [Documentation] Update BMC with user input MAC address.
17 [Arguments] ${mac_address}=${MAC_ADDRESS}
18
19 # Description of argument(s):
20 # mac_address The mac address (e.g. 00:01:6c:80:02:28).
21
22 Should Not Be Empty ${mac_address}
23 Open Connection And Log In
Joy Onyerikwu9b668972018-05-22 19:10:43 -050024 ${bmc_mac_addr} ${stderr} ${rc}= BMC Execute Command
25 ... cat /sys/class/net/eth0/address
Michael Walsh1b0ceb22017-05-31 16:03:01 -050026 Run Keyword If '${mac_address.lower()}' != '${bmc_mac_addr.lower()}'
27 ... Set MAC Address
28
Michael Walsh1b0ceb22017-05-31 16:03:01 -050029
Michael Walsh1b0ceb22017-05-31 16:03:01 -050030Set MAC Address
31 [Documentation] Update eth0 with input MAC address.
32 [Arguments] ${mac_address}=${MAC_ADDRESS}
33
34 # Description of argument(s):
35 # mac_address The mac address (e.g. 00:01:6c:80:02:28).
36
37 Write fw_setenv ethaddr ${mac_address}
38 OBMC Reboot (off)
Sunil Md1c4f272017-07-07 09:03:24 -050039
40 # Take SSH session post BMC reboot.
41 Open Connection And Log In
Joy Onyerikwu9b668972018-05-22 19:10:43 -050042 ${bmc_mac_addr} ${stderr} ${rc}= BMC Execute Command
43 ... cat /sys/class/net/eth0/address
Michael Walsh1b0ceb22017-05-31 16:03:01 -050044 Should Be Equal ${bmc_mac_addr} ${mac_address} ignore_case=True
45
Prashanth Kattie79c5402017-06-08 07:40:49 -050046
47Get BMC IP Info
48 [Documentation] Get system IP address and prefix length.
49
Prashanth Kattie79c5402017-06-08 07:40:49 -050050
51 # Get system IP address and prefix length details using "ip addr"
52 # Sample Output of "ip addr":
53 # 1: eth0: <BROADCAST,MULTIAST> mtu 1500 qdisc mq state UP qlen 1000
54 # link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
55 # inet xx.xx.xx.xx/24 brd xx.xx.xx.xx scope global eth0
56
Joy Onyerikwu9b668972018-05-22 19:10:43 -050057 ${cmd_output} ${stderr} ${rc}= BMC Execute Command
58 ... /sbin/ip addr | grep eth0
Prashanth Kattie79c5402017-06-08 07:40:49 -050059
60 # Get line having IP address details.
61 ${lines}= Get Lines Containing String ${cmd_output} inet
62
63 # List IP address details.
64 @{ip_components}= Split To Lines ${lines}
65
66 @{ip_data}= Create List
67
68 # Get all IP addresses and prefix lengths on system.
69 :FOR ${ip_component} IN @{ip_components}
70 \ @{if_info}= Split String ${ip_component}
71 \ ${ip_n_prefix}= Get From List ${if_info} 1
72 \ Append To List ${ip_data} ${ip_n_prefix}
73
74 [Return] ${ip_data}
75
76Get BMC Route Info
77 [Documentation] Get system route info.
78
Prashanth Kattie79c5402017-06-08 07:40:49 -050079
80 # Sample output of "ip route":
81 # default via xx.xx.xx.x dev eth0
82 # xx.xx.xx.0/23 dev eth0 src xx.xx.xx.xx
83 # xx.xx.xx.0/24 dev eth0 src xx.xx.xx.xx
84
Joy Onyerikwu9b668972018-05-22 19:10:43 -050085 ${cmd_output} ${stderr} ${rc}= BMC Execute Command
86 ... /sbin/ip route
Prashanth Kattie79c5402017-06-08 07:40:49 -050087
88 [Return] ${cmd_output}
89
George Keishing02651f02018-04-11 02:07:16 -050090# TODO: openbmc/openbmc-test-automation#1331
Prashanth Kattie79c5402017-06-08 07:40:49 -050091Get BMC MAC Address
92 [Documentation] Get system MAC address.
93
Prashanth Kattie79c5402017-06-08 07:40:49 -050094
95 # Sample output of "ip addr | grep ether":
96 # link/ether xx.xx.xx.xx.xx.xx brd ff:ff:ff:ff:ff:ff
97
Joy Onyerikwu9b668972018-05-22 19:10:43 -050098 ${cmd_output} ${stderr} ${rc}= BMC Execute Command
99 ... /sbin/ip addr | grep ether
Prashanth Kattie79c5402017-06-08 07:40:49 -0500100
Prashanth Katti9819b162017-12-12 05:38:59 -0600101 # Split the line and return MAC address.
102 # Split list data:
103 # link/ether | xx:xx:xx:xx:xx:xx | brd | ff:ff:ff:ff:ff:ff
104
105 @{words}= Split String ${cmd_output}
106
107 [Return] ${words[1]}
Prashanth Katti40fb8ca2017-07-25 06:47:23 -0500108
George Keishing02651f02018-04-11 02:07:16 -0500109
110Get BMC MAC Address List
111 [Documentation] Get system MAC address
112
113 # Sample output of "ip addr | grep ether":
114 # link/ether xx.xx.xx.xx.xx.xx brd ff:ff:ff:ff:ff:ff
115
Joy Onyerikwu9b668972018-05-22 19:10:43 -0500116 ${cmd_output} ${stderr} ${rc}= BMC Execute Command
117 ... /sbin/ip addr | grep ether
George Keishing02651f02018-04-11 02:07:16 -0500118
119 # Split the line and return MAC address.
120 # Split list data:
121 # link/ether | xx:xx:xx:xx:xx:xx | brd | ff:ff:ff:ff:ff:ff
122 # link/ether | xx:xx:xx:xx:xx:xx | brd | ff:ff:ff:ff:ff:ff
123
124 ${mac_list}= Create List
Joy Onyerikwu9b668972018-05-22 19:10:43 -0500125 @{lines}= Split To Lines ${cmd_output}
George Keishing02651f02018-04-11 02:07:16 -0500126 :FOR ${line} IN @{lines}
127 \ @{words}= Split String ${line}
128 \ Append To List ${mac_list} ${words[1]}
129
130 [Return] ${mac_list}
131
Prashanth Katti40fb8ca2017-07-25 06:47:23 -0500132Get BMC Hostname
133 [Documentation] Get BMC hostname.
134
Prashanth Kattic068faa2019-04-16 00:57:22 -0500135 # Sample output of "hostname":
136 # test_hostname
Prashanth Katti40fb8ca2017-07-25 06:47:23 -0500137
Prashanth Kattic068faa2019-04-16 00:57:22 -0500138 ${output} ${stderr} ${rc}= BMC Execute Command hostname
Prashanth Katti40fb8ca2017-07-25 06:47:23 -0500139
140 [Return] ${output}
Prashanth Katti90f9ff22017-08-11 06:17:12 -0500141
142Get List Of IP Address Via REST
143 [Documentation] Get list of IP address via REST.
144 [Arguments] @{ip_uri_list}
145
146 # Description of argument(s):
147 # ip_uri_list List of IP objects.
148 # Example:
149 # "data": [
150 # "/xyz/openbmc_project/network/eth0/ipv4/e9767624",
151 # "/xyz/openbmc_project/network/eth0/ipv4/31f4ce8b"
152 # ],
153
154 ${ip_list}= Create List
155
156 : FOR ${ip_uri} IN @{ip_uri_list}
157 \ ${ip_addr}= Read Attribute ${ip_uri} Address
158 \ Append To List ${ip_list} ${ip_addr}
159
160 [Return] @{ip_list}
161
162Delete IP And Object
163 [Documentation] Delete IP and object.
164 [Arguments] ${ip_addr} @{ip_uri_list}
165
166 # Description of argument(s):
167 # ip_addr IP address to be deleted.
168 # ip_uri_list List of IP object URIs.
169
170 # Find IP object having this IP address.
171
172 : FOR ${ip_uri} IN @{ip_uri_list}
173 \ ${ip_addr1}= Read Attribute ${ip_uri} Address
174 \ Run Keyword If '${ip_addr}' == '${ip_addr1}' Exit For Loop
175
176 # If the given IP address is not configured, return.
177 # Otherwise, delete the IP and object.
178
179 Run Keyword And Return If '${ip_addr}' != '${ip_addr1}'
180 ... Pass Execution IP address to be deleted is not configured.
181
182 Run Keyword And Ignore Error OpenBMC Delete Request ${ip_uri}
183
184 # After any modification on network interface, BMC restarts network
Prashanth Katti549c63a2018-07-17 06:13:37 -0500185 # module, wait until it is reachable. Then wait 15 seconds for new
186 # configuration to be updated on BMC.
Prashanth Katti90f9ff22017-08-11 06:17:12 -0500187
Prashanth Katti549c63a2018-07-17 06:13:37 -0500188 Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT}
189 ... ${NETWORK_RETRY_TIME}
190 Sleep 15s
Prashanth Katti90f9ff22017-08-11 06:17:12 -0500191
192 # Verify whether deleted IP address is removed from BMC system.
193
194 ${ip_data}= Get BMC IP Info
Prashanth Katti160faf62017-09-07 01:05:56 -0500195 Should Not Contain Match ${ip_data} ${ip_addr}*
Prashanth Katti90f9ff22017-08-11 06:17:12 -0500196 ... msg=IP address not deleted.
Prashanth Kattidf2e4fdf2018-02-07 07:04:13 -0600197
George Keishing58e47232018-02-12 10:35:15 -0600198Get First Non Pingable IP From Subnet
199 [Documentation] Find first non-pingable IP from the subnet and return it.
200 [Arguments] ${host}=${OPENBMC_HOST}
Prashanth Kattidf2e4fdf2018-02-07 07:04:13 -0600201
202 # Description of argument(s):
George Keishing58e47232018-02-12 10:35:15 -0600203 # host Any valid host name or IP address
204 # (e.g. "machine1" or "9.xx.xx.31").
Prashanth Kattidf2e4fdf2018-02-07 07:04:13 -0600205
George Keishing58e47232018-02-12 10:35:15 -0600206 # Non-pingable IP is unused IP address in the subnet.
207 ${host_name} ${ip_addr}= Get Host Name IP
Prashanth Kattidf2e4fdf2018-02-07 07:04:13 -0600208
209 # Split IP address into network part and host part.
210 # IP address will have 4 octets xx.xx.xx.xx.
211 # Sample output after split:
212 # split_ip [xx.xx.xx, xx]
213
214 ${split_ip}= Split String From Right ${ip_addr} . 1
215 # First element in list is Network part.
216 ${network_part}= Get From List ${split_ip} 0
217
George Keishing58e47232018-02-12 10:35:15 -0600218 : FOR ${octet4} IN RANGE 1 255
Prashanth Kattidf2e4fdf2018-02-07 07:04:13 -0600219 \ ${new_ip}= Catenate ${network_part}.${octet4}
Prashanth Kattidf2e4fdf2018-02-07 07:04:13 -0600220 \ ${status}= Run Keyword And Return Status Ping Host ${new_ip}
George Keishing58e47232018-02-12 10:35:15 -0600221 # If IP is non-pingable, return it.
222 \ Return From Keyword If '${status}' == 'False' ${new_ip}
Prashanth Kattidf2e4fdf2018-02-07 07:04:13 -0600223
George Keishing58e47232018-02-12 10:35:15 -0600224 Fail msg=No non-pingable IP could be found in subnet ${network_part}.
Prashanth Kattidf2e4fdf2018-02-07 07:04:13 -0600225
George Keishingbf724772018-02-21 08:57:16 -0600226
227Validate MAC On BMC
228 [Documentation] Validate MAC on BMC.
229 [Arguments] ${mac_addr}
230
231 # Description of argument(s):
232 # mac_addr MAC address of the BMC.
233
234 ${system_mac}= Get BMC MAC Address
235
236 ${status}= Compare MAC Address ${system_mac} ${mac_addr}
237 Should Be True ${status}
238 ... msg=MAC address ${system_mac} does not match ${mac_addr}.
239
Daniel Gonzalezbfd8aff2018-03-27 10:20:37 -0600240
241Run Build Net
242 [Documentation] Run build_net to preconfigure the ethernet interfaces.
243
244 OS Execute Command build_net help y y
Gunnar Mills7732c7e2018-08-14 11:54:24 -0500245 # Run pingum to check if the "build_net" was run correctly done.
Daniel Gonzalezbfd8aff2018-03-27 10:20:37 -0600246 ${output} ${stderr} ${rc}= OS Execute Command pingum
Prashanth Katti549c63a2018-07-17 06:13:37 -0500247 Should Contain ${output} All networks ping Ok
Sushil Singhf661a102019-06-04 00:52:48 -0500248
249
250Configure Hostname
251 [Documentation] Configure hostname on BMC via Redfish.
252 [Arguments] ${hostname}
253
254 # Description of argument(s):
255 # hostname A hostname value which is to be configured on BMC.
256
257 ${data}= Create Dictionary HostName=${hostname}
258 Redfish.patch ${REDFISH_NW_PROTOCOL_URI} body=&{data}
259
Naman Navin Hegde53691452019-07-30 00:22:37 -0500260
261Verify IP On BMC
262 [Documentation] Verify IP on BMC.
263 [Arguments] ${ip}
264
265 # Description of argument(s):
266 # ip IP address to be verified (e.g. "10.7.7.7").
267
268 # Get IP address details on BMC using IP command.
269 @{ip_data}= Get BMC IP Info
270 Should Contain Match ${ip_data} ${ip}/*
271 ... msg=IP address does not exist.
272
273
274Verify Gateway On BMC
275 [Documentation] Verify gateway on BMC.
276 [Arguments] ${gateway_ip}=0.0.0.0
277
278 # Description of argument(s):
279 # gateway_ip Gateway IP address.
280
281 ${route_info}= Get BMC Route Info
282
283 # If gateway IP is empty or 0.0.0.0 it will not have route entry.
284
285 Run Keyword If '${gateway_ip}' == '0.0.0.0'
286 ... Pass Execution Gateway IP is "0.0.0.0".
287 ... ELSE
288 ... Should Contain ${route_info} ${gateway_ip}
289 ... msg=Gateway IP address not matching.
290
291
292Get BMC DNS Info
293 [Documentation] Get system DNS info.
294
295
296 # Sample output of "resolv.conf":
297 # ### Generated manually via dbus settings ###
298 # nameserver 8.8.8.8
299
300 ${cmd_output} ${stderr} ${rc}= BMC Execute Command
301 ... cat /etc/resolv.conf
302
303 [Return] ${cmd_output}
304
305
306CLI Get Nameservers
307 [Documentation] Get the nameserver IPs from /etc/resolv.conf and return as a list.
308
309 # Example of /etc/resolv.conf data:
310 # nameserver x.x.x.x
311 # nameserver y.y.y.y
312
313 ${stdout} ${stderr} ${rc}= BMC Execute Command egrep nameserver /etc/resolv.conf | cut -f2- -d ' '
314 ${nameservers}= Split String ${stdout}
315
316 [Return] ${nameservers}