blob: 070d5ecab8b18bf286754f4e1e9229cb9ab85ce7 [file] [log] [blame]
SUMMARY = "Performance analysis tools for Linux"
DESCRIPTION = "Performance counters for Linux are a new kernel-based \
subsystem that provide a framework for all things \
performance analysis. It covers hardware level \
(CPU/PMU, Performance Monitoring Unit) features \
and software features (software counters, tracepoints) \
as well."
HOMEPAGE = "https://perf.wiki.kernel.org/index.php/Main_Page"
LICENSE = "GPLv2"
PR = "r9"
PACKAGECONFIG ??= "scripting tui libunwind"
PACKAGECONFIG[dwarf] = ",NO_DWARF=1"
PACKAGECONFIG[scripting] = ",NO_LIBPERL=1 NO_LIBPYTHON=1,perl python3"
# gui support was added with kernel 3.6.35
# since 3.10 libnewt was replaced by slang
# to cover a wide range of kernel we add both dependencies
PACKAGECONFIG[tui] = ",NO_NEWT=1,libnewt slang"
PACKAGECONFIG[libunwind] = ",NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1,libunwind"
PACKAGECONFIG[libnuma] = ",NO_LIBNUMA=1"
PACKAGECONFIG[systemtap] = ",NO_SDT=1,systemtap"
PACKAGECONFIG[jvmti] = ",NO_JVMTI=1"
# libaudit support would need scripting to be enabled
PACKAGECONFIG[audit] = ",NO_LIBAUDIT=1,audit"
PACKAGECONFIG[manpages] = ",,xmlto-native asciidoc-native"
PACKAGECONFIG[cap] = ",,libcap"
# libunwind is not yet ported for some architectures
PACKAGECONFIG_remove_arc = "libunwind"
PACKAGECONFIG_remove_riscv64 = "libunwind"
DEPENDS = " \
virtual/${MLPREFIX}libc \
${MLPREFIX}elfutils \
${MLPREFIX}binutils \
bison-native flex-native xz \
"
do_configure[depends] += "virtual/kernel:do_shared_workdir"
PROVIDES = "virtual/perf"
inherit linux-kernel-base kernel-arch manpages
# needed for building the tools/perf Python bindings
inherit ${@bb.utils.contains('PACKAGECONFIG', 'scripting', 'python3native', '', d)}
inherit python3-dir
export PYTHON_SITEPACKAGES_DIR
#kernel 3.1+ supports WERROR to disable warnings as errors
export WERROR = "0"
do_populate_lic[depends] += "virtual/kernel:do_patch"
# needed for building the tools/perf Perl binding
include ${@bb.utils.contains('PACKAGECONFIG', 'scripting', 'perf-perl.inc', '', d)}
inherit kernelsrc
S = "${WORKDIR}/${BP}"
SPDX_S = "${S}/tools/perf"
# The LDFLAGS is required or some old kernels fails due missing
# symbols and this is preferred than requiring patches to every old
# supported kernel.
LDFLAGS="-ldl -lutil"
EXTRA_OEMAKE = '\
-C ${S}/tools/perf \
O=${B} \
CROSS_COMPILE=${TARGET_PREFIX} \
ARCH=${ARCH} \
CC="${CC}" \
AR="${AR}" \
LD="${LD}" \
EXTRA_CFLAGS="-ldw" \
EXTRA_LDFLAGS="${PERF_EXTRA_LDFLAGS}" \
perfexecdir=${libexecdir} \
NO_GTK2=1 \
${PACKAGECONFIG_CONFARGS} \
TMPDIR="${B}" \
LIBUNWIND_DIR=${STAGING_EXECPREFIXDIR} \
'
EXTRA_OEMAKE += "\
'DESTDIR=${D}' \
'prefix=${prefix}' \
'bindir=${bindir}' \
'sharedir=${datadir}' \
'sysconfdir=${sysconfdir}' \
'perfexecdir=${libexecdir}/perf-core' \
'ETC_PERFCONFIG=${@os.path.relpath(sysconfdir, prefix)}' \
'sharedir=${@os.path.relpath(datadir, prefix)}' \
'mandir=${@os.path.relpath(mandir, prefix)}' \
'infodir=${@os.path.relpath(infodir, prefix)}' \
${@bb.utils.contains('PACKAGECONFIG', 'scripting', 'PYTHON=python3 PYTHON_CONFIG=python3-config', '', d)} \
"
# During do_configure, we might run a 'make clean'. That often breaks
# when done in parallel, so disable parallelism for do_configure. Note
# that it has to be done this way rather than by passing -j1, since
# perf's build system by default ignores any -j argument, but does
# honour a JOBS variable.
EXTRA_OEMAKE_append_task-configure = " JOBS=1"
PERF_SRC ?= "Makefile \
tools/arch \
tools/build \
tools/include \
tools/lib \
tools/Makefile \
tools/perf \
tools/scripts \
scripts/ \
arch/${ARCH}/Makefile \
"
PERF_EXTRA_LDFLAGS = ""
# MIPS N32
PERF_EXTRA_LDFLAGS_mipsarchn32eb = "-m elf32btsmipn32"
PERF_EXTRA_LDFLAGS_mipsarchn32el = "-m elf32ltsmipn32"
do_compile() {
# Linux kernel build system is expected to do the right thing
unset CFLAGS
oe_runmake all
}
do_install() {
# Linux kernel build system is expected to do the right thing
unset CFLAGS
oe_runmake install
# we are checking for this make target to be compatible with older perf versions
if ${@bb.utils.contains('PACKAGECONFIG', 'scripting', 'true', 'false', d)} && grep -q install-python_ext ${S}/tools/perf/Makefile*; then
oe_runmake DESTDIR=${D} install-python_ext
fi
}
do_configure[prefuncs] += "copy_perf_source_from_kernel"
python copy_perf_source_from_kernel() {
sources = (d.getVar("PERF_SRC") or "").split()
src_dir = d.getVar("STAGING_KERNEL_DIR")
dest_dir = d.getVar("S")
bb.utils.mkdirhier(dest_dir)
for s in sources:
src = oe.path.join(src_dir, s)
dest = oe.path.join(dest_dir, s)
if not os.path.exists(src):
bb.fatal("Path does not exist: %s. Maybe PERF_SRC does not match the kernel version." % src)
if os.path.isdir(src):
oe.path.copyhardlinktree(src, dest)
else:
src_path = os.path.dirname(s)
os.makedirs(os.path.join(dest_dir,src_path),exist_ok=True)
bb.utils.copyfile(src, dest)
}
do_configure_prepend () {
# If building a multlib based perf, the incorrect library path will be
# detected by perf, since it triggers via: ifeq ($(ARCH),x86_64). In a 32 bit
# build, with a 64 bit multilib, the arch won't match and the detection of a
# 64 bit build (and library) are not exected. To ensure that libraries are
# installed to the correct location, we can use the weak assignment in the
# config/Makefile.
#
# Also need to relocate .config-detected to $(OUTPUT)/config-detected
# for kernel sources that do not already do this
# as two builds (e.g. perf and lib32-perf from mutlilib can conflict
# with each other if its in the shared source directory
#
if [ -e "${S}/tools/perf/config/Makefile" ]; then
perfconfig="${S}/tools/perf/config/Makefile"
fi
if [ -e "${S}/tools/perf/Makefile.config" ]; then
perfconfig="${S}/tools/perf/Makefile.config"
fi
if [ -n "${perfconfig}" ]; then
# Match $(prefix)/$(lib) and $(prefix)/lib
sed -i -e 's,^libdir = \($(prefix)/.*lib\),libdir ?= \1,' \
-e 's,^perfexecdir = \(.*\),perfexecdir ?= \1,' \
-e 's,\ .config-detected, $(OUTPUT)/config-detected,g' \
${perfconfig}
fi
# The man pages installation is "$(INSTALL) -d -m 755 $(DESTDIR)$(man1dir)"
# in ${S}/tools/perf/Documentation/Makefile, if the mandir set to '?=', it
# will use the relative path 'share/man', in the way it will resulting in
# incorrect installation for man pages.
if [ -e "${S}/tools/perf/Documentation/Makefile" ]; then
sed -i 's,^mandir?=,mandir:=,' ${S}/tools/perf/Documentation/Makefile
fi
if [ -e "${S}/tools/perf/Makefile.perf" ]; then
sed -i -e 's,\ .config-detected, $(OUTPUT)/config-detected,g' \
${S}/tools/perf/Makefile.perf
sed -i -e "s,prefix='\$(DESTDIR_SQ)/usr'$,prefix='\$(DESTDIR_SQ)/usr' --install-lib='\$(DESTDIR)\$(PYTHON_SITEPACKAGES_DIR)',g" \
${S}/tools/perf/Makefile.perf
fi
sed -i -e "s,--root='/\$(DESTDIR_SQ)',--prefix='\$(DESTDIR_SQ)/usr' --install-lib='\$(DESTDIR)\$(PYTHON_SITEPACKAGES_DIR)',g" \
${S}/tools/perf/Makefile*
if [ -e "${S}/tools/build/Makefile.build" ]; then
sed -i -e 's,\ .config-detected, $(OUTPUT)/config-detected,g' \
${S}/tools/build/Makefile.build
fi
# We need to ensure the --sysroot option in CC is preserved
if [ -e "${S}/tools/perf/Makefile.perf" ]; then
sed -i 's,CC = $(CROSS_COMPILE)gcc,#CC,' ${S}/tools/perf/Makefile.perf
sed -i 's,AR = $(CROSS_COMPILE)ar,#AR,' ${S}/tools/perf/Makefile.perf
sed -i 's,LD = $(CROSS_COMPILE)ld,#LD,' ${S}/tools/perf/Makefile.perf
fi
if [ -e "${S}/tools/lib/api/Makefile" ]; then
sed -i 's,CC = $(CROSS_COMPILE)gcc,#CC,' ${S}/tools/lib/api/Makefile
sed -i 's,AR = $(CROSS_COMPILE)ar,#AR,' ${S}/tools/lib/api/Makefile
sed -i 's,LD = $(CROSS_COMPILE)ld,#LD,' ${S}/tools/lib/api/Makefile
fi
if [ -e "${S}/tools/lib/subcmd/Makefile" ]; then
sed -i 's,CC = $(CROSS_COMPILE)gcc,#CC,' ${S}/tools/lib/subcmd/Makefile
sed -i 's,AR = $(CROSS_COMPILE)ar,#AR,' ${S}/tools/lib/subcmd/Makefile
fi
if [ -e "${S}/tools/perf/config/feature-checks/Makefile" ]; then
sed -i 's,CC := $(CROSS_COMPILE)gcc -MD,CC += -MD,' ${S}/tools/perf/config/feature-checks/Makefile
fi
if [ -e "${S}/tools/build/Makefile.feature" ]; then
sed -i 's,CFLAGS=,CC="\$(CC)" CFLAGS=,' ${S}/tools/build/Makefile.feature
fi
# 3.17-rc1+ has a include issue for arm/powerpc. Temporarily sed in the appropriate include
if [ -e "${S}/tools/perf/arch/$ARCH/util/skip-callchain-idx.c" ]; then
sed -i 's,#include "util/callchain.h",#include "util/callchain.h"\n#include "util/debug.h",' ${S}/tools/perf/arch/$ARCH/util/skip-callchain-idx.c
fi
if [ -e "${S}/tools/perf/arch/arm/util/unwind-libunwind.c" ] && [ -e "${S}/tools/perf/arch/arm/tests/dwarf-unwind.c" ]; then
sed -i 's,#include "tests/tests.h",#include "tests/tests.h"\n#include "util/debug.h",' ${S}/tools/perf/arch/arm/tests/dwarf-unwind.c
sed -i 's,#include "perf_regs.h",#include "perf_regs.h"\n#include "util/debug.h",' ${S}/tools/perf/arch/arm/util/unwind-libunwind.c
fi
# use /usr/bin/env instead of version specific python
for s in `find ${S}/tools/perf/ -name '*.py'` scripts/bpf_helpers_doc.py; do
sed -i 's,/usr/bin/python2,/usr/bin/env python3,' "${s}"
sed -i 's,/usr/bin/env python2,/usr/bin/env python3,' "${s}"
sed -i 's,/usr/bin/python3,/usr/bin/env python3,' "${s}"
sed -i 's,/usr/bin/python,/usr/bin/env python3,' "${s}"
done
# unistd.h can be out of sync between libc-headers and the captured version in the perf source
# so we copy it from the sysroot unistd.h to the perf unistd.h
install -D -m0644 ${STAGING_INCDIR}/asm-generic/unistd.h ${S}/tools/include/uapi/asm-generic/unistd.h
install -D -m0644 ${STAGING_INCDIR}/asm-generic/unistd.h ${S}/include/uapi/asm-generic/unistd.h
}
python do_package_prepend() {
d.setVar('PKGV', d.getVar("KERNEL_VERSION").split("-")[0])
}
PACKAGE_ARCH = "${MACHINE_ARCH}"
PACKAGES =+ "${PN}-archive ${PN}-tests ${PN}-perl ${PN}-python"
RDEPENDS_${PN} += "elfutils bash"
RDEPENDS_${PN}-archive =+ "bash"
RDEPENDS_${PN}-python =+ "bash python3 python3-modules ${@bb.utils.contains('PACKAGECONFIG', 'audit', 'audit-python3', '', d)}"
RDEPENDS_${PN}-perl =+ "bash perl perl-modules"
RDEPENDS_${PN}-tests =+ "python3"
RSUGGESTS_SCRIPTING = "${@bb.utils.contains('PACKAGECONFIG', 'scripting', '${PN}-perl ${PN}-python', '',d)}"
RSUGGESTS_${PN} += "${PN}-archive ${PN}-tests ${RSUGGESTS_SCRIPTING}"
FILES_SOLIBSDEV = ""
FILES_${PN} += "${libexecdir}/perf-core ${exec_prefix}/libexec/perf-core ${libdir}/traceevent ${libdir}/libperf-jvmti.so"
FILES_${PN}-archive = "${libdir}/perf/perf-core/perf-archive"
FILES_${PN}-tests = "${libdir}/perf/perf-core/tests ${libexecdir}/perf-core/tests"
FILES_${PN}-python = " \
${PYTHON_SITEPACKAGES_DIR} \
${libexecdir}/perf-core/scripts/python \
"
FILES_${PN}-perl = "${libexecdir}/perf-core/scripts/perl"
INHIBIT_PACKAGE_DEBUG_SPLIT="1"
DEBUG_OPTIMIZATION_append = " -Wno-error=maybe-uninitialized"