reset upstream subtrees to yocto 2.6
Reset the following subtrees on thud HEAD:
poky: 87e3a9739d
meta-openembedded: 6094ae18c8
meta-security: 31dc4e7532
meta-raspberrypi: a48743dc36
meta-xilinx: c42016e2e6
Also re-apply backports that didn't make it into thud:
poky:
17726d0 systemd-systemctl-native: handle Install wildcards
meta-openembedded:
4321a5d libtinyxml2: update to 7.0.1
042f0a3 libcereal: Add native and nativesdk classes
e23284f libcereal: Allow empty package
030e8d4 rsyslog: curl-less build with fmhttp PACKAGECONFIG
179a1b9 gtest: update to 1.8.1
Squashed OpenBMC subtree compatibility updates:
meta-aspeed:
Brad Bishop (1):
aspeed: add yocto 2.6 compatibility
meta-ibm:
Brad Bishop (1):
ibm: prepare for yocto 2.6
meta-ingrasys:
Brad Bishop (1):
ingrasys: set layer compatibility to yocto 2.6
meta-openpower:
Brad Bishop (1):
openpower: set layer compatibility to yocto 2.6
meta-phosphor:
Brad Bishop (3):
phosphor: set layer compatibility to thud
phosphor: libgpg-error: drop patches
phosphor: react to fitimage artifact rename
Ed Tanous (4):
Dropbear: upgrade options for latest upgrade
yocto2.6: update openssl options
busybox: remove upstream watchdog patch
systemd: Rebase CONFIG_CGROUP_BPF patch
Change-Id: I7b1fe71cca880d0372a82d94b5fd785323e3a9e7
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware.inc b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware.inc
index 02bbc73..d64fad9 100644
--- a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware.inc
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware.inc
@@ -1,7 +1,7 @@
DESCRIPTION = "ARM Trusted Firmware"
LICENSE = "BSD"
-LIC_FILES_CHKSUM = "file://license.rst;md5=33065335ea03d977d0569f270b39603e"
+LIC_FILES_CHKSUM = "file://license.rst;md5=e927e02bca647e14efd87e9e914b2443"
PROVIDES = "virtual/arm-trusted-firmware"
@@ -28,6 +28,7 @@
COMPATIBLE_MACHINE = "zynqmp"
PLATFORM_zynqmp = "zynqmp"
+
# requires CROSS_COMPILE set by hand as there is no configure script
export CROSS_COMPILE="${TARGET_PREFIX}"
@@ -37,8 +38,23 @@
AS[unexport] = "1"
LD[unexport] = "1"
+ATF_CONSOLE ?= ""
+ATF_CONSOLE_zynqmp = "cadence"
+
+DEBUG ?= ""
+EXTRA_OEMAKE_zynqmp_append = "${@' ZYNQMP_CONSOLE=${ATF_CONSOLE}' if d.getVar('ATF_CONSOLE', True) != '' else ''}"
+EXTRA_OEMAKE_append = " ${@bb.utils.contains('DEBUG', '1', ' DEBUG=${DEBUG}', '', d)}"
+
+OUTPUT_DIR = "${@bb.utils.contains('DEBUG', '1', '${B}/${PLATFORM}/debug', '${B}/${PLATFORM}/release', d)}"
+
+ATF_MEM_BASE ?= ""
+ATF_MEM_SIZE ?= ""
+
+EXTRA_OEMAKE_zynqmp_append = "${@' ZYNQMP_ATF_MEM_BASE=${ATF_MEM_BASE}' if d.getVar('ATF_MEM_BASE', True) != '' else ''}"
+EXTRA_OEMAKE_zynqmp_append = "${@' ZYNQMP_ATF_MEM_SIZE=${ATF_MEM_SIZE}' if d.getVar('ATF_MEM_SIZE', True) != '' else ''}"
+
do_configure() {
- :
+ oe_runmake clean -C ${S} BUILD_BASE=${B} PLAT=${PLATFORM}
}
do_compile() {
@@ -49,8 +65,6 @@
:
}
-OUTPUT_DIR = "${B}/${PLATFORM}/release"
-
do_deploy() {
install -d ${DEPLOYDIR}
install -m 0644 ${OUTPUT_DIR}/bl31/bl31.elf ${DEPLOYDIR}/${ATF_BASE_NAME}.elf
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_2018.1.bb b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_2018.1.bb
deleted file mode 100644
index 6a9eea6..0000000
--- a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_2018.1.bb
+++ /dev/null
@@ -1,7 +0,0 @@
-ATF_VERSION = "1.4"
-XILINX_RELEASE_VERSION = "v2018.1"
-BRANCH ?= "master"
-SRCREV ?= "df4a7e97d57494c7d79de51b1e0e450d982cea98"
-
-include arm-trusted-firmware.inc
-
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_2018.3.bb b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_2018.3.bb
new file mode 100644
index 0000000..8c8a5d0
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_2018.3.bb
@@ -0,0 +1,7 @@
+ATF_VERSION = "1.5"
+XILINX_RELEASE_VERSION = "v2018.3"
+BRANCH ?= "master"
+SRCREV ?= "08560c36ea5b6f48b962cb4bd9a79b35bb3d95ce"
+
+include arm-trusted-firmware.inc
+
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/device-tree/device-tree.bb b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/device-tree/device-tree.bb
index dc49cbb..81965c1 100644
--- a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/device-tree/device-tree.bb
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/device-tree/device-tree.bb
@@ -1,85 +1,39 @@
-SUMMARY = "Device Trees for BSPs"
-DESCRIPTION = "Device Tree generation and packaging for BSP Device Trees."
+SUMMARY = "Xilinx BSP device trees"
+DESCRIPTION = "Xilinx BSP device trees from within layer."
SECTION = "bsp"
+# the device trees from within the layer are licensed as MIT, kernel includes are GPL
LICENSE = "MIT & GPLv2"
LIC_FILES_CHKSUM = " \
file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302 \
file://${COMMON_LICENSE_DIR}/GPL-2.0;md5=801f80980d171dd6425610833a22dbe6 \
"
-inherit deploy kernel-arch
+inherit devicetree
PROVIDES = "virtual/dtb"
-INHIBIT_DEFAULT_DEPS = "1"
-DEPENDS += "dtc-native"
+# common zynq include
+SRC_URI_append_zynq = " file://zynq-7000-qspi-dummy.dtsi"
-COMPATIBLE_MACHINE ?= "^$"
+# device tree sources for the various machines
+COMPATIBLE_MACHINE_picozed-zynq7 = ".*"
+SRC_URI_append_picozed-zynq7 = " file://picozed-zynq7.dts"
-PACKAGE_ARCH = "${MACHINE_ARCH}"
+COMPATIBLE_MACHINE_qemu-zynq7 = ".*"
+SRC_URI_append_qemu-zynq7 = " file://qemu-zynq7.dts"
-FILES_${PN} = "/boot/devicetree/*.dtb /boot/devicetree/*.dtbo"
-
-S = "${WORKDIR}"
-B = "${WORKDIR}/build"
-
-SYSROOT_DIRS += "/boot/devicetree"
-
-# By default provide the current kernel arch's boot/dts and boot/dts/include.
-KERNEL_DTS_INCLUDE ??= " \
- ${STAGING_KERNEL_DIR}/arch/${ARCH}/boot/dts \
- ${STAGING_KERNEL_DIR}/arch/${ARCH}/boot/dts/include \
- "
-# For arm64/zynqmp the xilinx specific includes are subdired under a vendor directory.
-KERNEL_DTS_INCLUDE_append_zynqmp = " \
- ${STAGING_KERNEL_DIR}/arch/${ARCH}/boot/dts/xilinx \
+COMPATIBLE_MACHINE_zybo-linux-bd-zynq7 = ".*"
+SRC_URI_append_zybo-linux-bd-zynq7 = " \
+ file://zybo-linux-bd-zynq7.dts \
+ file://pcw.dtsi \
+ file://pl.dtsi \
"
-DTS_FILES_PATH ?= "${S}"
-DTS_INCLUDE ?= "${DTS_FILES_PATH} ${KERNEL_DTS_INCLUDE}"
-
-DT_PADDING_SIZE ?= "0x3000"
-DEVICETREE_FLAGS ?= " \
- -R 8 -p ${DT_PADDING_SIZE} -b 0 \
- ${@' '.join(['-i %s' % i for i in d.getVar('DTS_INCLUDE', True).split()])} \
- "
-DEVICETREE_OFLAGS ?= "-@ -H epapr"
-DEVICETREE_PP_FLAGS ?= " \
- -nostdinc -Ulinux -x assembler-with-cpp \
- ${@' '.join(['-I%s' % i for i in d.getVar('DTS_INCLUDE', True).split()])} \
+COMPATIBLE_MACHINE_kc705-microblazeel = ".*"
+SRC_URI_append_kc705-microblazeel = " \
+ file://kc705-microblazeel.dts \
+ file://pl.dtsi \
+ file://system-conf.dtsi \
"
-python () {
- # auto add dependency on kernel tree
- if d.getVar("KERNEL_DTS_INCLUDE") != "":
- d.appendVarFlag("do_compile", "depends", " virtual/kernel:do_configure")
-}
-
-do_compile() {
- for DTS_FILE in ${DTS_FILES_PATH}/*.dts; do
- DTS_NAME=`basename -s .dts ${DTS_FILE}`
- ${BUILD_CPP} ${DEVICETREE_PP_FLAGS} -o `basename ${DTS_FILE}`.pp ${DTS_FILE}
-
- # for now use the existance of the '/plugin/' tag to detect overlays
- if grep -qse "/plugin/;" `basename ${DTS_FILE}`.pp; then
- dtc ${DEVICETREE_OFLAGS} -I dts -O dtb ${DEVICETREE_FLAGS} -o ${DTS_NAME}.dtbo `basename ${DTS_FILE}`.pp
- else
- dtc -I dts -O dtb ${DEVICETREE_FLAGS} -o ${DTS_NAME}.dtb `basename ${DTS_FILE}`.pp
- fi
- done
-}
-
-do_install() {
- for DTB_FILE in `ls *.dtb *.dtbo`; do
- install -Dm 0644 ${B}/${DTB_FILE} ${D}/boot/devicetree/${DTB_FILE}
- done
-}
-
-do_deploy() {
- for DTB_FILE in `ls *.dtb *.dtbo`; do
- install -Dm 0644 ${B}/${DTB_FILE} ${DEPLOYDIR}/${DTB_FILE}
- done
-}
-addtask deploy before do_build after do_install
-
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/device-tree/device-tree.bbappend b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/device-tree/device-tree.bbappend
deleted file mode 100644
index e128e0e..0000000
--- a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/device-tree/device-tree.bbappend
+++ /dev/null
@@ -1,30 +0,0 @@
-
-FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
-
-# common zynq include
-SRC_URI_append_zynq = " file://zynq-7000-qspi-dummy.dtsi"
-
-# device tree sources for the various machines
-COMPATIBLE_MACHINE_picozed-zynq7 = ".*"
-SRC_URI_append_picozed-zynq7 = " file://picozed-zynq7.dts"
-
-COMPATIBLE_MACHINE_microzed-zynq7 = ".*"
-SRC_URI_append_microzed-zynq7 = " file://microzed-zynq7.dts"
-
-COMPATIBLE_MACHINE_qemu-zynq7 = ".*"
-SRC_URI_append_qemu-zynq7 = " file://qemu-zynq7.dts"
-
-COMPATIBLE_MACHINE_zybo-linux-bd-zynq7 = ".*"
-SRC_URI_append_zybo-linux-bd-zynq7 = " \
- file://zybo-linux-bd-zynq7.dts \
- file://pcw.dtsi \
- file://pl.dtsi \
- "
-
-COMPATIBLE_MACHINE_kc705-microblazeel = ".*"
-SRC_URI_append_kc705-microblazeel = " \
- file://kc705-microblazeel.dts \
- file://pl.dtsi \
- file://system-conf.dtsi \
- "
-
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/device-tree/files/microzed-zynq7.dts b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/device-tree/files/microzed-zynq7.dts
deleted file mode 100644
index b9376a4..0000000
--- a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/device-tree/files/microzed-zynq7.dts
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Copyright (C) 2011 - 2014 Xilinx
- * Copyright (C) 2016 Jagan Teki <jteki@openedev.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-/dts-v1/;
-/include/ "zynq-7000.dtsi"
-
-/ {
- model = "Zynq MicroZED Development Board";
- compatible = "xlnx,zynq-microzed", "xlnx,zynq-7000";
-
- aliases {
- ethernet0 = &gem0;
- serial0 = &uart1;
- };
-
- memory {
- device_type = "memory";
- reg = <0x0 0x40000000>;
- };
-
- chosen {
- bootargs = "earlycon";
- stdout-path = "serial0:115200n8";
- };
-
- usb_phy0: phy0 {
- compatible = "usb-nop-xceiv";
- #phy-cells = <0>;
- };
-};
-
-&clkc {
- ps-clk-frequency = <33333333>;
-};
-
-&gem0 {
- status = "okay";
- phy-mode = "rgmii-id";
- phy-handle = <ðernet_phy>;
-
- ethernet_phy: ethernet-phy@0 {
- reg = <0>;
- };
-};
-
-&sdhci0 {
- status = "okay";
-};
-
-&uart1 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
- dr_mode = "host";
- usb-phy = <&usb_phy0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb0_default>;
-};
-
-&pinctrl0 {
- pinctrl_usb0_default: usb0-default {
- mux {
- groups = "usb0_0_grp";
- function = "usb0";
- };
-
- conf {
- groups = "usb0_0_grp";
- slew-rate = <0>;
- io-standard = <1>;
- };
-
- conf-rx {
- pins = "MIO29", "MIO31", "MIO36";
- bias-high-impedance;
- };
-
- conf-tx {
- pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
- "MIO35", "MIO37", "MIO38", "MIO39";
- bias-disable;
- };
- };
-};
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/pmu-firmware/pmu-firmware_2018.1.bb b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/pmu-firmware/pmu-firmware_2018.1.bb
deleted file mode 100644
index e54e103..0000000
--- a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/pmu-firmware/pmu-firmware_2018.1.bb
+++ /dev/null
@@ -1,99 +0,0 @@
-SUMMARY = "Firmware for the PMU on the ZynqMP Programmable Silicon"
-HOMEPAGE = "https://github.com/Xilinx/embeddedsw"
-SECTION = "bsp"
-
-INHIBIT_DEFAULT_DEPS = "1"
-DEPENDS = "virtual/${TARGET_PREFIX}gcc newlib libgloss libgcc"
-
-# force this recipe to provide a target virtual/pmu-firmware. this is applied
-# after any class extender mapping and results in this recipe always providing
-# 'virtual/pmu-firmware'.
-python append_target_provides () {
- d.appendVar("PROVIDES", " virtual/pmu-firmware")
-}
-addhandler append_target_provides
-append_target_provides[eventmask] = "bb.event.RecipeParsed"
-
-# This source links in a number of components with differing licenses, and some
-# licenses are not Open Source compatible. Additionally the pmu-firmware source
-# itself is licensed under a modified MIT license which restricts use to Xilinx
-# devices only.
-LICENSE = "Proprietary"
-LIC_FILES_CHKSUM = "file://../../../../license.txt;md5=04841c5ad8409b474da7180de5391926"
-
-inherit deploy
-
-XILINX_RELEASE_VERSION = "v2018.1"
-SRCREV = "aaa566bc3fa19255de4d434ebfa57ae3a9d261b2"
-PV = "${XILINX_RELEASE_VERSION}+git${SRCPV}"
-
-SRC_URI = "git://github.com/Xilinx/embeddedsw.git;protocol=https;nobranch=1"
-
-COMPATIBLE_HOST = "microblaze.*-elf"
-COMPATIBLE_MACHINE = "^$"
-COMPATIBLE_MACHINE_zynqmp = "zynqmp"
-
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
-S = "${WORKDIR}/git/lib/sw_apps/zynqmp_pmufw/src"
-
-# The makefile does not handle parallelization
-PARALLEL_MAKE = ""
-
-do_configure() {
- # manually do the copy_bsp step first, so as to be able to fix up use of
- # mb-* commands
- ${S}/../misc/copy_bsp.sh
-}
-
-COMPILER = "${CC}"
-COMPILER_FLAGS = "-O2 -c"
-EXTRA_COMPILER_FLAGS = "-g -Wall -Wextra -Os -flto -ffat-lto-objects"
-ARCHIVER = "${AR}"
-
-# HACK: fix the dirty bug where xilsecure wants to call this PSVersion
-# function, which is not implemented for microblaze. The symbols never make it
-# into the final elf as the xilsecure function that uses it is not called in
-# pmufw.
-EXTRA_COMPILER_FLAGS_append = " -DXGetPSVersion_Info=atexit"
-
-BSP_DIR ?= "${S}/../misc/zynqmp_pmufw_bsp"
-BSP_TARGETS_DIR ?= "${BSP_DIR}/psu_pmu_0/libsrc"
-
-def bsp_make_vars(d):
- s = ["COMPILER", "CC", "COMPILER_FLAGS", "EXTRA_COMPILER_FLAGS", "ARCHIVER", "AR", "AS"]
- return " ".join(["\"%s=%s\"" % (v, d.getVar(v)) for v in s])
-
-do_compile() {
- # the Makefile in ${S}/../misc/Makefile, does not handle CC, AR, AS, etc
- # properly. So do its job manually. Preparing the includes first, then libs.
- for i in $(ls ${BSP_TARGETS_DIR}/*/src/Makefile); do
- oe_runmake -C $(dirname $i) -s include ${@bsp_make_vars(d)}
- done
- for i in $(ls ${BSP_TARGETS_DIR}/*/src/Makefile); do
- oe_runmake -C $(dirname $i) -s libs ${@bsp_make_vars(d)}
- done
-
- # --build-id=none is required due to linker script not defining a location for it.
- oe_runmake CC="${CC}" CC_FLAGS="-MMD -MP -Wl,--build-id=none"
-}
-
-do_install() {
- :
-}
-
-PMU_FIRMWARE_BASE_NAME ?= "${BPN}-${PKGE}-${PKGV}-${PKGR}-${MACHINE}-${DATETIME}"
-PMU_FIRMWARE_BASE_NAME[vardepsexclude] = "DATETIME"
-
-do_deploy() {
- install -Dm 0644 ${B}/executable.elf ${DEPLOYDIR}/${PMU_FIRMWARE_BASE_NAME}.elf
- ln -sf ${PMU_FIRMWARE_BASE_NAME}.elf ${DEPLOYDIR}/${BPN}-${MACHINE}.elf
- ln -sf ${BPN}-${MACHINE}.elf ${DEPLOYDIR}/pmu-${MACHINE}.elf
- ${OBJCOPY} -O binary ${B}/executable.elf ${B}/executable.bin
- install -m 0644 ${B}/executable.bin ${DEPLOYDIR}/${PMU_FIRMWARE_BASE_NAME}.bin
- ln -sf ${PMU_FIRMWARE_BASE_NAME}.bin ${DEPLOYDIR}/${BPN}-${MACHINE}.bin
- ln -sf ${BPN}-${MACHINE}.bin ${DEPLOYDIR}/pmu-${MACHINE}.bin
-}
-addtask deploy before do_build after do_install
-
-BBCLASSEXTEND = "zynqmp-pmu"
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/reference-design/kc705-bitstream_2018.1.bb b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/reference-design/kc705-bitstream_2018.3.bb
similarity index 90%
rename from meta-xilinx/meta-xilinx-bsp/recipes-bsp/reference-design/kc705-bitstream_2018.1.bb
rename to meta-xilinx/meta-xilinx-bsp/recipes-bsp/reference-design/kc705-bitstream_2018.3.bb
index 0b6ca20..6a2ca7c 100644
--- a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/reference-design/kc705-bitstream_2018.1.bb
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/reference-design/kc705-bitstream_2018.3.bb
@@ -16,8 +16,8 @@
BSP_NAME = "xilinx-kc705"
BSP_FILE = "${BSP_NAME}-v${PV}-final.bsp"
SRC_URI = "https://www.xilinx.com/member/forms/download/xef.html?filename=${BSP_FILE};downloadfilename=${BSP_FILE}"
-SRC_URI[md5sum] = "53e5e0ad87d0388fe5b11fa5fc029288"
-SRC_URI[sha256sum] = "301f994bd836ad78ebfc92af6c16470b53253121ca31762dc1f770a9ff11dc18"
+SRC_URI[md5sum] = "5c0365a8a26cc27b4419aa1d7dd82351"
+SRC_URI[sha256sum] = "a909a91a37a9925ee2f972ccb10f986a26ff9785c1a71a483545a192783bf773"
PROVIDES = "virtual/bitstream"
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-spl-zynq-init.inc b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-spl-zynq-init.inc
index 9cf09ff..cf8b9b7 100644
--- a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-spl-zynq-init.inc
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-spl-zynq-init.inc
@@ -64,10 +64,8 @@
d.setVar("SPL_BINARY", "")
if providesbin and d.getVar("SOC_FAMILY") in ["zynqmp"]:
- # depend on the pmu-firmware build
- d.appendVar("DEPENDS", " virtual/pmu-firmware")
# determine the path relative to the source tree
- relpath = os.path.relpath(d.expand("${DEPLOY_DIR_IMAGE}/pmu-${MACHINE}.bin"), d.getVar("S"))
+ relpath = os.path.relpath(d.expand("${PMU_FIRMWARE_DEPLOY_DIR}/${PMU_FIRMWARE_IMAGE_NAME}.bin"), d.getVar("S"))
# setup PMU Firmware path via MAKEFLAGS
d.appendVar("EXTRA_OEMAKE", " CONFIG_PMUFW_INIT_FILE=\"{0}\"".format(relpath))
}
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx/v2018.1/microblaze-kc705-Convert-microblaze-generic-to-k.patch b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx/v2018.3/microblaze-kc705-Convert-microblaze-generic-to-k.patch
similarity index 100%
rename from meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx/v2018.1/microblaze-kc705-Convert-microblaze-generic-to-k.patch
rename to meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx/v2018.3/microblaze-kc705-Convert-microblaze-generic-to-k.patch
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2018.1.bb b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2018.3.bb
similarity index 69%
rename from meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2018.1.bb
rename to meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2018.3.bb
index fb2c618..c87672e 100644
--- a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2018.1.bb
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2018.3.bb
@@ -1,9 +1,9 @@
UBOOT_VERSION = "v2018.01"
-XILINX_RELEASE_VERSION = "v2018.1"
+XILINX_RELEASE_VERSION = "v2018.3"
UBRANCH ?= "master"
-SRCREV ?= "949e5cb9a736bac32ea8886e3953da55bdd30754"
+SRCREV ?= "d8fc4b3b70bccf1577dab69f6ddfd4ada9a93bac"
include u-boot-xlnx.inc
include u-boot-spl-zynq-init.inc
@@ -23,5 +23,10 @@
xilinx_zynqmp_zcu102_rev1_0_config \
xilinx_zynqmp_zcu106_revA_config \
xilinx_zynqmp_zcu104_revC_config \
+ xilinx_zynqmp_zcu100_revC_config \
+ xilinx_zynqmp_zcu111_revA_config \
+ xilinx_zynqmp_zc1275_revA_config \
+ xilinx_zynqmp_zc1275_revB_config \
+ xilinx_zynqmp_zc1254_revA_config \
"
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-uenv.bb b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-uenv.bb
index f6c2a00..952077d 100644
--- a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-uenv.bb
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-uenv.bb
@@ -5,43 +5,28 @@
INHIBIT_DEFAULT_DEPS = "1"
PACKAGE_ARCH = "${MACHINE_ARCH}"
+python () {
+ # The device trees must be populated in the deploy directory to correctly
+ # detect them and their names. This means that this recipe needs to depend
+ # on those deployables just like the image recipe does.
+ deploydeps = ["virtual/kernel"]
+ for i in (d.getVar("MACHINE_ESSENTIAL_EXTRA_RDEPENDS") or "").split():
+ if i != d.getVar("BPN"):
+ deploydeps.append(i)
+ for i in (d.getVar("EXTRA_IMAGEDEPENDS") or "").split():
+ if i != d.getVar("BPN"):
+ deploydeps.append(i)
+
+ # add as DEPENDS since the targets might not have do_deploy tasks
+ if len(deploydeps) != 0:
+ d.appendVar("DEPENDS", " " + " ".join(deploydeps))
+}
+
COMPATIBLE_MACHINE = "^$"
COMPATIBLE_MACHINE_zynq = ".*"
COMPATIBLE_MACHINE_zynqmp = ".*"
-inherit deploy
-
-def bootfiles_bitstream(d):
- expectedfiles = [("bitstream", True)]
- expectedexts = [(".bit", True), (".bin", False)]
- # search for bitstream paths, use the renamed file. First matching is used
- for f in (d.getVar("IMAGE_BOOT_FILES") or "").split():
- sf, rf = f, f
- if ';' in f:
- sf, rf = f.split(';')
-
- # skip boot.bin and u-boot.bin, it is not a bitstream
- skip = ["boot.bin", "u-boot.bin"]
- if sf in skip or rf in skip:
- continue
-
- for e, t in expectedfiles:
- if sf == e or rf == e:
- return rf, t
- for e, t in expectedexts:
- if sf.endswith(e) or rf.endswith(e):
- return rf, t
- return "", False
-
-def bootfiles_dtb_filepath(d):
- if d.getVar("IMAGE_BOOT_FILES"):
- dtbs = d.getVar("IMAGE_BOOT_FILES").split(" ")
- # IMAGE_BOOT_FILES has extra renaming info in the format '<source>;<target>'
- dtbs = [f.split(";")[0] for f in dtbs]
- dtbs = [f for f in dtbs if f.endswith(".dtb")]
- if len(dtbs) != 0:
- return dtbs[0]
- return ""
+inherit deploy image-wic-utils
def uboot_boot_cmd(d):
if d.getVar("KERNEL_IMAGETYPE") in ["uImage", "fitImage"]:
@@ -61,7 +46,7 @@
env["kernel_image"] = d.getVar("KERNEL_IMAGETYPE")
env["kernel_load_address"] = d.getVar("KERNEL_LOAD_ADDRESS")
- env["devicetree_image"] = bootfiles_dtb_filepath(d)
+ env["devicetree_image"] = boot_files_dtb_filepath(d)
env["devicetree_load_address"] = d.getVar("DEVICETREE_LOAD_ADDRESS")
env["bootargs"] = d.getVar("KERNEL_BOOTARGS")
@@ -73,7 +58,7 @@
# default uenvcmd does not load bitstream
env["uenvcmd"] = "run bootkernel"
- bitstream, bitstreamtype = bootfiles_bitstream(d)
+ bitstream, bitstreamtype = boot_files_bitstream(d)
if bitstream:
env["bitstream_image"] = bitstream
env["bitstream_load_address"] = "0x100000"