| DESCRIPTION = "ARM Trusted Firmware" |
| |
| LICENSE = "BSD" |
| LIC_FILES_CHKSUM = "file://license.rst;md5=33065335ea03d977d0569f270b39603e" |
| |
| PROVIDES = "virtual/arm-trusted-firmware" |
| |
| inherit deploy |
| |
| DEPENDS += "u-boot-mkimage-native" |
| |
| S = "${WORKDIR}/git" |
| B = "${WORKDIR}/build" |
| |
| XILINX_RELEASE_VERSION ?= "" |
| ATF_VERSION ?= "1.4" |
| ATF_VERSION_EXTENSION ?= "-xilinx-${XILINX_RELEASE_VERSION}" |
| PV = "${ATF_VERSION}${ATF_VERSION_EXTENSION}+git${SRCPV}" |
| |
| BRANCH ?= "" |
| REPO ?= "git://github.com/Xilinx/arm-trusted-firmware.git;protocol=https" |
| BRANCHARG = "${@['nobranch=1', 'branch=${BRANCH}'][d.getVar('BRANCH', True) != '']}" |
| SRC_URI = "${REPO};${BRANCHARG}" |
| |
| ATF_BASE_NAME ?= "${PN}-${PKGE}-${PKGV}-${PKGR}-${DATETIME}" |
| ATF_BASE_NAME[vardepsexclude] = "DATETIME" |
| |
| COMPATIBLE_MACHINE = "zynqmp" |
| PLATFORM_zynqmp = "zynqmp" |
| |
| # requires CROSS_COMPILE set by hand as there is no configure script |
| export CROSS_COMPILE="${TARGET_PREFIX}" |
| |
| # Let the Makefile handle setting up the CFLAGS and LDFLAGS as it is a standalone application |
| CFLAGS[unexport] = "1" |
| LDFLAGS[unexport] = "1" |
| AS[unexport] = "1" |
| LD[unexport] = "1" |
| |
| do_configure() { |
| : |
| } |
| |
| do_compile() { |
| oe_runmake -C ${S} BUILD_BASE=${B} PLAT=${PLATFORM} RESET_TO_BL31=1 bl31 |
| } |
| |
| do_install() { |
| : |
| } |
| |
| OUTPUT_DIR = "${B}/${PLATFORM}/release" |
| |
| do_deploy() { |
| install -d ${DEPLOYDIR} |
| install -m 0644 ${OUTPUT_DIR}/bl31/bl31.elf ${DEPLOYDIR}/${ATF_BASE_NAME}.elf |
| ln -sf ${ATF_BASE_NAME}.elf ${DEPLOYDIR}/${PN}.elf |
| install -m 0644 ${OUTPUT_DIR}/bl31.bin ${DEPLOYDIR}/${ATF_BASE_NAME}.bin |
| ln -sf ${ATF_BASE_NAME}.bin ${DEPLOYDIR}/${PN}.bin |
| |
| # Get the entry point address from the elf. |
| BL31_BASE_ADDR=$(${READELF} -h ${OUTPUT_DIR}/bl31/bl31.elf | egrep -m 1 -i "entry point.*?0x" | sed -r 's/.*?(0x.*?)/\1/g') |
| mkimage -A arm64 -O arm-trusted-firmware -T kernel -C none \ |
| -a $BL31_BASE_ADDR -e $BL31_BASE_ADDR \ |
| -d ${OUTPUT_DIR}/bl31.bin ${DEPLOYDIR}/${ATF_BASE_NAME}.ub |
| ln -sf ${ATF_BASE_NAME}.ub ${DEPLOYDIR}/${PN}.ub |
| ln -sf ${ATF_BASE_NAME}.ub ${DEPLOYDIR}/atf-uboot.ub |
| } |
| addtask deploy before do_build after do_compile |