blob: f526690390f4d8590571e595fe7d954bb21a343a [file] [log] [blame]
SUMMARY = "Sound server for Linux and Unix-like operating systems"
HOMEPAGE = "http://www.pulseaudio.org"
AUTHOR = "Lennart Poettering"
SECTION = "libs/multimedia"
# Most of PulseAudio code is under LGPLv2.1+. There are a few exceptions:
#
# The "adrian" echo canceller variant has code under a non-standard permissive
# license. See src/modules/echo-cancel/adrian-license.txt for details. This
# recipe disables the adrian echo canceller to avoid hassle with the unusual
# license.
#
# The src/modules/reserve* and src/pulsecore/rtkit* files are under the MIT
# license.
#
# The src/pulsecore/filter/ directory contains code under the 3-clause BSD
# license.
#
# People who distribute PulseAudio binaries need to also consider that there
# are some dependencies to GPL libraries. LGPL code that depends on GPL
# libraries probably becomes effectively GPL-licensed (at compile-time? or at
# at link-time?). I'm not a lawyer, though, so I'm not sure of the exact
# implications. The GPL dependencies only affect the server, not the client
# library, with the exception of libdbus that affects both. These are the GPL
# library dependencies:
#
# One of the resampler implementations uses libsamplerate. This recipe doesn't
# enable that resampler, however.
#
# One of the database implementations uses gdbm. This recipe doesn't enable
# that database implementation, however.
#
# module-lirc (enabled by PACKAGECONFIG[lirc]) uses LIRC.
#
# module-equalizer-sink uses FFTW. This recipe disables that, however.
#
# The dependency with the most complicated licensing considerations is libdbus.
# When PACKAGECONFIG[dbus] is enabled (like it is by default), libdbus will be
# used by both the server and the client library (libpulse). Does this affect
# applications that use libpulse? It should be also noted that libdbus is
# dual-licensed: either GPLv2+ or AFL-2 terms apply. Whose decision is it which
# of the licenses apply? What a mess. Some people hold the view that libdbus is
# a system library that is covered by the "special exception" in GPLv2's
# section 3, and therefore libdbus's GPL license doesn't affect PulseAudio.
LICENSE = "LGPLv2.1+ & MIT & BSD-3-Clause"
LIC_FILES_CHKSUM = "file://LICENSE;md5=0e5cd938de1a7a53ea5adac38cc10c39 \
file://GPL;md5=4325afd396febcb659c36b49533135d4 \
file://LGPL;md5=2d5025d4aa3495befef8f17206a5b0a1 \
file://src/modules/echo-cancel/adrian-license.txt;md5=abbab006a561fbffccedf1c3531f34ab \
file://src/pulsecore/filter/LICENSE.WEBKIT;md5=49defbaffddf8c51faf606ff7fc3b1f7 \
file://src/pulsecore/resampler.h;beginline=4;endline=21;md5=09794012ae16912c0270f3280cc8ff84 \
file://src/modules/reserve.h;beginline=6;endline=28;md5=0e23094760367d51b6609750e9b31fbb \
file://src/pulsecore/rtkit.h;beginline=6;endline=29;md5=3f00ff966716ae0817c31576d1473528 \
file://src/modules/echo-cancel/adrian-aec.h;beginline=3;endline=12;md5=d3ed4fad1c073f8b06f37495dc5d1026 \
file://src/pulsecore/filter/biquad.h;beginline=1;endline=4;md5=6d46d1365206528a20137355924233c1 \
"
DEPENDS = "libatomic-ops libsndfile1 libtool intltool-native"
# optional
DEPENDS += "udev alsa-lib glib-2.0 gconf"
DEPENDS += "speexdsp libxml-parser-perl-native libcap"
inherit autotools bash-completion pkgconfig useradd gettext perlnative bluetooth systemd manpages
# *.desktop rules wont be generated during configure and build will fail
# if using --disable-nls
USE_NLS = "yes"
EXTRA_OECONF = "\
--disable-hal-compat \
--disable-orc \
--enable-tcpwrap=no \
--with-access-group=audio \
--disable-openssl \
--with-database=simple \
--without-zsh-completion-dir \
--with-udev-rules-dir=`pkg-config --variable=udevdir udev`/rules.d \
ac_cv_header_valgrind_memcheck_h=no \
--disable-tests \
"
# soxr (the SoX Resampler library) doesn't seem to be currently packaged in
# oe-core nor meta-oe, so let's not add a PACKAGECONFIG entry for it for now.
EXTRA_OECONF += "--without-soxr"
# The FFTW dependency (for module-equalizer-sink) was removed in commit
# ddbd713293 without explaining why it was not made a PACKAGECONFIG item
# instead. Oh well, let's keep it disabled until someone expresses some
# interest in having it enabled.
EXTRA_OECONF += "--without-fftw"
# The "adrian" echo canceller implementation has a non-standard license
# (src/modules/echo-cancel/adrian-license.txt). It's a permissive license, so
# the licensing terms are probably not problematic, but it would be an extra
# hassle to add the license to OE-Core's set of licenses. The canceller isn't
# very good anyway, better alternatives exist (such as the webrtc canceller).
EXTRA_OECONF += "--disable-adrian-aec"
# FIXME: The gsettings module is temporarily disabled, because adding support
# for it is a bit complicated.
EXTRA_OECONF += "--disable-gsettings"
PACKAGECONFIG ??= "${@bb.utils.contains('DISTRO_FEATURES', 'bluetooth', '${BLUEZ}', '', d)} \
${@bb.utils.contains('DISTRO_FEATURES', 'zeroconf', 'avahi', '', d)} \
${@bb.utils.contains('DISTRO_FEATURES', '3g', 'ofono', '', d)} \
${@bb.utils.filter('DISTRO_FEATURES', 'ipv6 systemd x11', d)} \
dbus \
"
PACKAGECONFIG[dbus] = "--enable-dbus,--disable-dbus,dbus"
PACKAGECONFIG[bluez4] = "--enable-bluez4,--disable-bluez4,bluez4 sbc"
PACKAGECONFIG[bluez5] = "--enable-bluez5,--disable-bluez5,bluez5 sbc"
PACKAGECONFIG[ofono] = "--enable-bluez5-ofono-headset,--disable-bluez5-ofono-headset,ofono"
PACKAGECONFIG[gtk] = "--enable-gtk3,--disable-gtk3,gtk+3"
PACKAGECONFIG[systemd] = "--enable-systemd-daemon --enable-systemd-login --enable-systemd-journal --with-systemduserunitdir=${systemd_user_unitdir},--disable-systemd-daemon --disable-systemd-login --disable-systemd-journal,systemd"
PACKAGECONFIG[x11] = "--enable-x11,--disable-x11,virtual/libx11 libxtst libice libsm libxcb"
PACKAGECONFIG[avahi] = "--enable-avahi,--disable-avahi,avahi"
PACKAGECONFIG[jack] = "--enable-jack,--disable-jack,jack"
# Since many embedded systems don't have non-root users, it's useful to be
# able to use pulseaudio autospawn for root as well.
PACKAGECONFIG[autospawn-for-root] = ",,,"
PACKAGECONFIG[lirc] = "--enable-lirc,--disable-lirc,lirc"
PACKAGECONFIG[webrtc] = "--enable-webrtc-aec,--disable-webrtc-aec,webrtc-audio-processing"
PACKAGECONFIG[ipv6] = "--enable-ipv6,--disable-ipv6,"
PACKAGECONFIG[manpages] = "--enable-manpages, --disable-manpages, "
EXTRA_OECONF_append_arm = "${@bb.utils.contains("TUNE_FEATURES", "neon", "", " --enable-neon-opt=no", d)}"
EXTRA_OECONF_append_armeb = "${@bb.utils.contains("TUNE_FEATURES", "neon", "", " --enable-neon-opt=no", d)}"
export TARGET_PFPU = "${TARGET_FPU}"
# TODO: Use more fine granular version
#OE_LT_RPATH_ALLOW=":${libdir}/pulse-0.9:"
OE_LT_RPATH_ALLOW = "any"
OE_LT_RPATH_ALLOW[export]="1"
set_cfg_value () {
sed -i -e "s/\(; *\)\?$2 =.*/$2 = $3/" "$1"
if ! grep -q "^$2 = $3\$" "$1"; then
die "Use of sed to set '$2' to '$3' in '$1' failed"
fi
}
do_compile_append () {
if ${@bb.utils.contains('PACKAGECONFIG', 'autospawn-for-root', 'true', 'false', d)}; then
set_cfg_value src/client.conf allow-autospawn-for-root yes
fi
}
do_install_append() {
install -d ${D}${sysconfdir}/default/volatiles
install -m 0644 ${WORKDIR}/volatiles.04_pulse ${D}${sysconfdir}/default/volatiles/volatiles.04_pulse
}
USERADD_PACKAGES = "pulseaudio-server"
GROUPADD_PARAM_pulseaudio-server = "--system pulse"
USERADD_PARAM_pulseaudio-server = "--system --home /var/run/pulse \
--no-create-home --shell /bin/false \
--groups audio,pulse --gid pulse pulse"
# The console-kit module is included here explicitly so bitbake can map to the
# RDEPENDS we define for it in this recipe, and thereby ensure that when
# adding the console-kit module to an image, we also get the necessary
# consolekit package produced.
PACKAGES =+ "libpulsecore libpulsecommon libpulse libpulse-simple libpulse-mainloop-glib \
pulseaudio-server pulseaudio-misc ${@bb.utils.contains('PACKAGECONFIG', 'dbus', 'pulseaudio-module-console-kit', '', d)}"
#upgrade path:
RREPLACES_pulseaudio-server = "libpulse-bin libpulse-conf"
PACKAGES_DYNAMIC += "^pulseaudio-lib-.* ^pulseaudio-module-.*"
FILES_libpulsecore = "${libdir}/pulseaudio/libpulsecore*.so"
FILES_libpulsecommon = "${libdir}/pulseaudio/libpulsecommon*.so"
# client.conf configures the behaviour of libpulse, so it belongs in the same
# package.
FILES_libpulse = "${libdir}/libpulse.so.* ${sysconfdir}/pulse/client.conf"
FILES_libpulse-simple = "${libdir}/libpulse-simple.so.*"
FILES_libpulse-mainloop-glib = "${libdir}/libpulse-mainloop-glib.so.*"
FILES_${PN}-dev += "${libdir}/pulse-${PV}/modules/*.la ${datadir}/vala ${libdir}/cmake"
FILES_${PN}-conf = "${sysconfdir}"
FILES_${PN}-bin += "${sysconfdir}/default/volatiles/volatiles.04_pulse"
FILES_${PN}-server = "${bindir}/pulseaudio ${bindir}/start-* ${sysconfdir} ${bindir}/pactl */udev/rules.d/*.rules */*/udev/rules.d/*.rules ${systemd_user_unitdir}/*"
#SYSTEMD_PACKAGES = "${PN}-server"
SYSTEMD_SERVICE_${PN}-server = "pulseaudio.service"
FILES_${PN}-misc = "${bindir}/* ${libdir}/pulseaudio/libpulsedsp.so"
# Allow the pulseaudio package to be created empty as a placeholder (-dbg and -dev depend on it)
ALLOW_EMPTY_${PN} = "1"
CONFFILES_libpulse = "${sysconfdir}/pulse/client.conf"
CONFFILES_pulseaudio-server = "\
${sysconfdir}/pulse/default.pa \
${sysconfdir}/pulse/daemon.conf \
${sysconfdir}/pulse/system.pa \
"
pkg_postinst_${PN}-server() {
if [ -z "$D" ] && [ -e ${sysconfdir}/init.d/populate-volatile.sh ] ; then
${sysconfdir}/init.d/populate-volatile.sh update
fi
}
python populate_packages_prepend() {
#d.setVar('PKG_pulseaudio', 'pulseaudio')
plugindir = d.expand('${libdir}/pulse-${PV}/modules/')
do_split_packages(d, plugindir, '^module-(.*)\.so$', 'pulseaudio-module-%s', 'PulseAudio module for %s', extra_depends='', prepend=True)
do_split_packages(d, plugindir, '^lib(.*)\.so$', 'pulseaudio-lib-%s', 'PulseAudio library for %s', extra_depends='', prepend=True)
}
RDEPENDS_pulseaudio-server = " \
pulseaudio-module-filter-apply \
pulseaudio-module-filter-heuristics \
pulseaudio-module-udev-detect \
pulseaudio-module-null-sink \
pulseaudio-module-device-restore \
pulseaudio-module-stream-restore \
pulseaudio-module-card-restore \
pulseaudio-module-augment-properties \
pulseaudio-module-detect \
pulseaudio-module-alsa-sink \
pulseaudio-module-alsa-source \
pulseaudio-module-alsa-card \
pulseaudio-module-native-protocol-unix \
pulseaudio-module-default-device-restore \
pulseaudio-module-intended-roles \
pulseaudio-module-rescue-streams \
pulseaudio-module-always-sink \
pulseaudio-module-suspend-on-idle \
pulseaudio-module-position-event-sounds \
pulseaudio-module-role-cork \
pulseaudio-module-switch-on-port-available"
# If the server is installed, it's usually desirable to make ALSA applications
# use PulseAudio. alsa-plugins-pulseaudio-conf will install the configuration
# that makes the PulseAudio plugin the default ALSA device.
RDEPENDS_pulseaudio-server += "alsa-plugins-pulseaudio-conf"
# pulseaudio-module-console-kit is built whenever dbus is enabled by PACKAGECONFIG
# but consolekit depends on libx11 and is available only for DISTRO with x11 in DISTRO_FEATURES
RDEPENDS_pulseaudio-module-console-kit =+ "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'consolekit', '', d)}"
RDEPENDS_pulseaudio-misc += "pulseaudio-module-cli-protocol-unix"
FILES_pulseaudio-module-gconf += "${libexecdir}/pulse/gconf-helper"
FILES_pulseaudio-module-alsa-card += "${datadir}/pulseaudio/alsa-mixer"
# The console-kit module is good to have on X11 systems (it keeps PulseAudio
# running for the duration of the user login session). The device-manager and
# x11-* modules are referenced from the start-pulseaudio-x11 script, so those
# modules must be installed when X11 is enabled.
RDEPENDS_pulseaudio-server += "\
${@bb.utils.contains('DISTRO_FEATURES', 'x11', '\
pulseaudio-module-console-kit \
pulseaudio-module-device-manager \
pulseaudio-module-x11-cork-request \
pulseaudio-module-x11-publish \
pulseaudio-module-x11-xsmp \
', '', d)}"