| # Copyright (C) 2013 Intel Corporation |
| # |
| # Released under the MIT license (see COPYING.MIT) |
| |
| inherit metadata_scm |
| inherit image-artifact-names |
| |
| # testimage.bbclass enables testing of qemu images using python unittests. |
| # Most of the tests are commands run on target image over ssh. |
| # To use it add testimage to global inherit and call your target image with -c testimage |
| # You can try it out like this: |
| # - first add IMAGE_CLASSES += "testimage" in local.conf |
| # - build a qemu core-image-sato |
| # - then bitbake core-image-sato -c testimage. That will run a standard suite of tests. |
| # |
| # The tests can be run automatically each time an image is built if you set |
| # TESTIMAGE_AUTO = "1" |
| |
| TESTIMAGE_AUTO ??= "0" |
| |
| # You can set (or append to) TEST_SUITES in local.conf to select the tests |
| # which you want to run for your target. |
| # The test names are the module names in meta/lib/oeqa/runtime/cases. |
| # Each name in TEST_SUITES represents a required test for the image. (no skipping allowed) |
| # Appending "auto" means that it will try to run all tests that are suitable for the image (each test decides that on it's own). |
| # Note that order in TEST_SUITES is relevant: tests are run in an order such that |
| # tests mentioned in @skipUnlessPassed run before the tests that depend on them, |
| # but without such dependencies, tests run in the order in which they are listed |
| # in TEST_SUITES. |
| # |
| # A layer can add its own tests in lib/oeqa/runtime, provided it extends BBPATH as normal in its layer.conf. |
| |
| # TEST_LOG_DIR contains a command ssh log and may contain infromation about what command is running, output and return codes and for qemu a boot log till login. |
| # Booting is handled by this class, and it's not a test in itself. |
| # TEST_QEMUBOOT_TIMEOUT can be used to set the maximum time in seconds the launch code will wait for the login prompt. |
| # TEST_OVERALL_TIMEOUT can be used to set the maximum time in seconds the tests will be allowed to run (defaults to no limit). |
| # TEST_QEMUPARAMS can be used to pass extra parameters to qemu, e.g. "-m 1024" for setting the amount of ram to 1 GB. |
| # TEST_RUNQEMUPARAMS can be used to pass extra parameters to runqemu, e.g. "gl" to enable OpenGL acceleration. |
| |
| # TESTIMAGE_BOOT_PATTERNS can be used to override certain patterns used to communicate with the target when booting, |
| # if a pattern is not specifically present on this variable a default will be used when booting the target. |
| # TESTIMAGE_BOOT_PATTERNS[<flag>] overrides the pattern used for that specific flag, where flag comes from a list of accepted flags |
| # e.g. normally the system boots and waits for a login prompt (login:), after that it sends the command: "root\n" to log as the root user |
| # if we wanted to log in as the hypothetical "webserver" user for example we could set the following: |
| # TESTIMAGE_BOOT_PATTERNS = "send_login_user search_login_succeeded" |
| # TESTIMAGE_BOOT_PATTERNS[send_login_user] = "webserver\n" |
| # TESTIMAGE_BOOT_PATTERNS[search_login_succeeded] = "webserver@[a-zA-Z0-9\-]+:~#" |
| # The accepted flags are the following: search_reached_prompt, send_login_user, search_login_succeeded, search_cmd_finished. |
| # They are prefixed with either search/send, to differentiate if the pattern is meant to be sent or searched to/from the target terminal |
| |
| TEST_LOG_DIR ?= "${WORKDIR}/testimage" |
| |
| TEST_EXPORT_DIR ?= "${TMPDIR}/testimage/${PN}" |
| TEST_INSTALL_TMP_DIR ?= "${WORKDIR}/testimage/install_tmp" |
| TEST_NEEDED_PACKAGES_DIR ?= "${WORKDIR}/testimage/packages" |
| TEST_EXTRACTED_DIR ?= "${TEST_NEEDED_PACKAGES_DIR}/extracted" |
| TEST_PACKAGED_DIR ?= "${TEST_NEEDED_PACKAGES_DIR}/packaged" |
| |
| BASICTESTSUITE = "\ |
| ping date df ssh scp python perl gi ptest parselogs \ |
| logrotate connman systemd oe_syslog pam stap ldd xorg \ |
| kernelmodule gcc buildcpio buildlzip buildgalculator \ |
| dnf rpm opkg apt weston" |
| |
| DEFAULT_TEST_SUITES = "${BASICTESTSUITE}" |
| |
| # musl doesn't support systemtap |
| DEFAULT_TEST_SUITES:remove:libc-musl = "stap" |
| |
| # qemumips is quite slow and has reached the timeout limit several times on the YP build cluster, |
| # mitigate this by removing build tests for qemumips machines. |
| MIPSREMOVE ??= "buildcpio buildlzip buildgalculator" |
| DEFAULT_TEST_SUITES:remove:qemumips = "${MIPSREMOVE}" |
| DEFAULT_TEST_SUITES:remove:qemumips64 = "${MIPSREMOVE}" |
| |
| TEST_SUITES ?= "${DEFAULT_TEST_SUITES}" |
| |
| TEST_QEMUBOOT_TIMEOUT ?= "1000" |
| TEST_OVERALL_TIMEOUT ?= "" |
| TEST_TARGET ?= "qemu" |
| TEST_QEMUPARAMS ?= "" |
| TEST_RUNQEMUPARAMS ?= "" |
| |
| TESTIMAGE_BOOT_PATTERNS ?= "" |
| |
| TESTIMAGEDEPENDS = "" |
| TESTIMAGEDEPENDS:append:qemuall = " qemu-native:do_populate_sysroot qemu-helper-native:do_populate_sysroot qemu-helper-native:do_addto_recipe_sysroot" |
| TESTIMAGEDEPENDS += "${@bb.utils.contains('IMAGE_PKGTYPE', 'rpm', 'cpio-native:do_populate_sysroot', '', d)}" |
| TESTIMAGEDEPENDS += "${@bb.utils.contains('IMAGE_PKGTYPE', 'rpm', 'dnf-native:do_populate_sysroot', '', d)}" |
| TESTIMAGEDEPENDS += "${@bb.utils.contains('IMAGE_PKGTYPE', 'rpm', 'createrepo-c-native:do_populate_sysroot', '', d)}" |
| TESTIMAGEDEPENDS += "${@bb.utils.contains('IMAGE_PKGTYPE', 'ipk', 'opkg-utils-native:do_populate_sysroot package-index:do_package_index', '', d)}" |
| TESTIMAGEDEPENDS += "${@bb.utils.contains('IMAGE_PKGTYPE', 'deb', 'apt-native:do_populate_sysroot package-index:do_package_index', '', d)}" |
| |
| TESTIMAGELOCK = "${TMPDIR}/testimage.lock" |
| TESTIMAGELOCK:qemuall = "" |
| |
| TESTIMAGE_DUMP_DIR ?= "${LOG_DIR}/runtime-hostdump/" |
| |
| TESTIMAGE_UPDATE_VARS ?= "DL_DIR WORKDIR DEPLOY_DIR" |
| |
| testimage_dump_target () { |
| top -bn1 |
| ps |
| free |
| df |
| # The next command will export the default gateway IP |
| export DEFAULT_GATEWAY=$(ip route | awk '/default/ { print $3}') |
| ping -c3 $DEFAULT_GATEWAY |
| dmesg |
| netstat -an |
| ip address |
| # Next command will dump logs from /var/log/ |
| find /var/log/ -type f 2>/dev/null -exec echo "====================" \; -exec echo {} \; -exec echo "====================" \; -exec cat {} \; -exec echo "" \; |
| } |
| |
| testimage_dump_host () { |
| top -bn1 |
| iostat -x -z -N -d -p ALL 20 2 |
| ps -ef |
| free |
| df |
| memstat |
| dmesg |
| ip -s link |
| netstat -an |
| } |
| |
| testimage_dump_monitor () { |
| query-status |
| query-block |
| dump-guest-memory {"paging":false,"protocol":"file:%s.img"} |
| } |
| |
| python do_testimage() { |
| testimage_main(d) |
| } |
| |
| addtask testimage |
| do_testimage[nostamp] = "1" |
| do_testimage[depends] += "${TESTIMAGEDEPENDS}" |
| do_testimage[lockfiles] += "${TESTIMAGELOCK}" |
| |
| def testimage_sanity(d): |
| if (d.getVar('TEST_TARGET') == 'simpleremote' |
| and (not d.getVar('TEST_TARGET_IP') |
| or not d.getVar('TEST_SERVER_IP'))): |
| bb.fatal('When TEST_TARGET is set to "simpleremote" ' |
| 'TEST_TARGET_IP and TEST_SERVER_IP are needed too.') |
| |
| def get_testimage_configuration(d, test_type, machine): |
| import platform |
| from oeqa.utils.metadata import get_layers |
| configuration = {'TEST_TYPE': test_type, |
| 'MACHINE': machine, |
| 'DISTRO': d.getVar("DISTRO"), |
| 'IMAGE_BASENAME': d.getVar("IMAGE_BASENAME"), |
| 'IMAGE_PKGTYPE': d.getVar("IMAGE_PKGTYPE"), |
| 'STARTTIME': d.getVar("DATETIME"), |
| 'HOST_DISTRO': oe.lsb.distro_identifier().replace(' ', '-'), |
| 'LAYERS': get_layers(d.getVar("BBLAYERS"))} |
| return configuration |
| get_testimage_configuration[vardepsexclude] = "DATETIME" |
| |
| def get_testimage_json_result_dir(d): |
| json_result_dir = os.path.join(d.getVar("LOG_DIR"), 'oeqa') |
| custom_json_result_dir = d.getVar("OEQA_JSON_RESULT_DIR") |
| if custom_json_result_dir: |
| json_result_dir = custom_json_result_dir |
| return json_result_dir |
| |
| def get_testimage_result_id(configuration): |
| return '%s_%s_%s_%s' % (configuration['TEST_TYPE'], configuration['IMAGE_BASENAME'], configuration['MACHINE'], configuration['STARTTIME']) |
| |
| def get_testimage_boot_patterns(d): |
| from collections import defaultdict |
| boot_patterns = defaultdict(str) |
| # Only accept certain values |
| accepted_patterns = ['search_reached_prompt', 'send_login_user', 'search_login_succeeded', 'search_cmd_finished'] |
| # Not all patterns need to be overriden, e.g. perhaps we only want to change the user |
| boot_patterns_flags = d.getVarFlags('TESTIMAGE_BOOT_PATTERNS') or {} |
| if boot_patterns_flags: |
| patterns_set = [p for p in boot_patterns_flags.items() if p[0] in d.getVar('TESTIMAGE_BOOT_PATTERNS').split()] |
| for flag, flagval in patterns_set: |
| if flag not in accepted_patterns: |
| bb.fatal('Testimage: The only accepted boot patterns are: search_reached_prompt,send_login_user, \ |
| search_login_succeeded,search_cmd_finished\n Make sure your TESTIMAGE_BOOT_PATTERNS=%s \ |
| contains an accepted flag.' % d.getVar('TESTIMAGE_BOOT_PATTERNS')) |
| return |
| # We know boot prompt is searched through in binary format, others might be expressions |
| if flag == 'search_reached_prompt': |
| boot_patterns[flag] = flagval.encode() |
| else: |
| boot_patterns[flag] = flagval.encode().decode('unicode-escape') |
| return boot_patterns |
| |
| |
| def testimage_main(d): |
| import os |
| import json |
| import signal |
| import logging |
| import shutil |
| |
| from bb.utils import export_proxies |
| from oeqa.core.utils.misc import updateTestData |
| from oeqa.runtime.context import OERuntimeTestContext |
| from oeqa.runtime.context import OERuntimeTestContextExecutor |
| from oeqa.core.target.qemu import supported_fstypes |
| from oeqa.core.utils.test import getSuiteCases |
| from oeqa.utils import make_logger_bitbake_compatible |
| |
| def sigterm_exception(signum, stackframe): |
| """ |
| Catch SIGTERM from worker in order to stop qemu. |
| """ |
| os.kill(os.getpid(), signal.SIGINT) |
| |
| def handle_test_timeout(timeout): |
| bb.warn("Global test timeout reached (%s seconds), stopping the tests." %(timeout)) |
| os.kill(os.getpid(), signal.SIGINT) |
| |
| testimage_sanity(d) |
| |
| if (d.getVar('IMAGE_PKGTYPE') == 'rpm' |
| and ('dnf' in d.getVar('TEST_SUITES') or 'auto' in d.getVar('TEST_SUITES'))): |
| create_rpm_index(d) |
| |
| logger = make_logger_bitbake_compatible(logging.getLogger("BitBake")) |
| pn = d.getVar("PN") |
| |
| bb.utils.mkdirhier(d.getVar("TEST_LOG_DIR")) |
| |
| image_name = ("%s/%s" % (d.getVar('DEPLOY_DIR_IMAGE'), |
| d.getVar('IMAGE_LINK_NAME'))) |
| |
| tdname = "%s.testdata.json" % image_name |
| try: |
| td = json.load(open(tdname, "r")) |
| except (FileNotFoundError) as err: |
| bb.fatal('File %s Not Found. Have you built the image with INHERIT+="testimage" in the conf/local.conf?' % tdname) |
| |
| # Some variables need to be updates (mostly paths) with the |
| # ones of the current environment because some tests require them. |
| updateTestData(d, td, d.getVar('TESTIMAGE_UPDATE_VARS').split()) |
| |
| image_manifest = "%s.manifest" % image_name |
| image_packages = OERuntimeTestContextExecutor.readPackagesManifest(image_manifest) |
| |
| extract_dir = d.getVar("TEST_EXTRACTED_DIR") |
| |
| # Get machine |
| machine = d.getVar("MACHINE") |
| |
| # Get rootfs |
| fstypes = d.getVar('IMAGE_FSTYPES').split() |
| if d.getVar("TEST_TARGET") == "qemu": |
| fstypes = [fs for fs in fstypes if fs in supported_fstypes] |
| if not fstypes: |
| bb.fatal('Unsupported image type built. Add a compatible image to ' |
| 'IMAGE_FSTYPES. Supported types: %s' % |
| ', '.join(supported_fstypes)) |
| qfstype = fstypes[0] |
| qdeffstype = d.getVar("QB_DEFAULT_FSTYPE") |
| if qdeffstype: |
| qfstype = qdeffstype |
| rootfs = '%s.%s' % (image_name, qfstype) |
| |
| # Get tmpdir (not really used, just for compatibility) |
| tmpdir = d.getVar("TMPDIR") |
| |
| # Get deploy_dir_image (not really used, just for compatibility) |
| dir_image = d.getVar("DEPLOY_DIR_IMAGE") |
| |
| # Get bootlog |
| bootlog = os.path.join(d.getVar("TEST_LOG_DIR"), |
| 'qemu_boot_log.%s' % d.getVar('DATETIME')) |
| |
| # Get display |
| display = d.getVar("BB_ORIGENV").getVar("DISPLAY") |
| |
| # Get kernel |
| kernel_name = ('%s-%s.bin' % (d.getVar("KERNEL_IMAGETYPE"), machine)) |
| kernel = os.path.join(d.getVar("DEPLOY_DIR_IMAGE"), kernel_name) |
| |
| # Get boottime |
| boottime = int(d.getVar("TEST_QEMUBOOT_TIMEOUT")) |
| |
| # Get use_kvm |
| kvm = oe.types.qemu_use_kvm(d.getVar('QEMU_USE_KVM'), d.getVar('TARGET_ARCH')) |
| |
| # Get OVMF |
| ovmf = d.getVar("QEMU_USE_OVMF") |
| |
| slirp = False |
| if d.getVar("QEMU_USE_SLIRP"): |
| slirp = True |
| |
| # TODO: We use the current implementation of qemu runner because of |
| # time constrains, qemu runner really needs a refactor too. |
| target_kwargs = { 'machine' : machine, |
| 'rootfs' : rootfs, |
| 'tmpdir' : tmpdir, |
| 'dir_image' : dir_image, |
| 'display' : display, |
| 'kernel' : kernel, |
| 'boottime' : boottime, |
| 'bootlog' : bootlog, |
| 'kvm' : kvm, |
| 'slirp' : slirp, |
| 'dump_dir' : d.getVar("TESTIMAGE_DUMP_DIR"), |
| 'serial_ports': len(d.getVar("SERIAL_CONSOLES").split()), |
| 'ovmf' : ovmf, |
| 'tmpfsdir' : d.getVar("RUNQEMU_TMPFS_DIR"), |
| } |
| |
| if d.getVar("TESTIMAGE_BOOT_PATTERNS"): |
| target_kwargs['boot_patterns'] = get_testimage_boot_patterns(d) |
| |
| # TODO: Currently BBPATH is needed for custom loading of targets. |
| # It would be better to find these modules using instrospection. |
| target_kwargs['target_modules_path'] = d.getVar('BBPATH') |
| |
| # hardware controlled targets might need further access |
| target_kwargs['powercontrol_cmd'] = d.getVar("TEST_POWERCONTROL_CMD") or None |
| target_kwargs['powercontrol_extra_args'] = d.getVar("TEST_POWERCONTROL_EXTRA_ARGS") or "" |
| target_kwargs['serialcontrol_cmd'] = d.getVar("TEST_SERIALCONTROL_CMD") or None |
| target_kwargs['serialcontrol_extra_args'] = d.getVar("TEST_SERIALCONTROL_EXTRA_ARGS") or "" |
| target_kwargs['testimage_dump_monitor'] = d.getVar("testimage_dump_monitor") or "" |
| target_kwargs['testimage_dump_target'] = d.getVar("testimage_dump_target") or "" |
| |
| def export_ssh_agent(d): |
| import os |
| |
| variables = ['SSH_AGENT_PID', 'SSH_AUTH_SOCK'] |
| for v in variables: |
| if v not in os.environ.keys(): |
| val = d.getVar(v) |
| if val is not None: |
| os.environ[v] = val |
| |
| export_ssh_agent(d) |
| |
| # runtime use network for download projects for build |
| export_proxies(d) |
| |
| # we need the host dumper in test context |
| host_dumper = OERuntimeTestContextExecutor.getHostDumper( |
| d.getVar("testimage_dump_host"), |
| d.getVar("TESTIMAGE_DUMP_DIR")) |
| |
| # the robot dance |
| target = OERuntimeTestContextExecutor.getTarget( |
| d.getVar("TEST_TARGET"), logger, d.getVar("TEST_TARGET_IP"), |
| d.getVar("TEST_SERVER_IP"), **target_kwargs) |
| |
| # test context |
| tc = OERuntimeTestContext(td, logger, target, host_dumper, |
| image_packages, extract_dir) |
| |
| # Load tests before starting the target |
| test_paths = get_runtime_paths(d) |
| test_modules = d.getVar('TEST_SUITES').split() |
| if not test_modules: |
| bb.fatal('Empty test suite, please verify TEST_SUITES variable') |
| |
| tc.loadTests(test_paths, modules=test_modules) |
| |
| suitecases = getSuiteCases(tc.suites) |
| if not suitecases: |
| bb.fatal('Empty test suite, please verify TEST_SUITES variable') |
| else: |
| bb.debug(2, 'test suites:\n\t%s' % '\n\t'.join([str(c) for c in suitecases])) |
| |
| package_extraction(d, tc.suites) |
| |
| results = None |
| complete = False |
| orig_sigterm_handler = signal.signal(signal.SIGTERM, sigterm_exception) |
| try: |
| # We need to check if runqemu ends unexpectedly |
| # or if the worker send us a SIGTERM |
| tc.target.start(params=d.getVar("TEST_QEMUPARAMS"), runqemuparams=d.getVar("TEST_RUNQEMUPARAMS")) |
| import threading |
| try: |
| threading.Timer(int(d.getVar("TEST_OVERALL_TIMEOUT")), handle_test_timeout, (int(d.getVar("TEST_OVERALL_TIMEOUT")),)).start() |
| except ValueError: |
| pass |
| results = tc.runTests() |
| complete = True |
| except (KeyboardInterrupt, BlockingIOError) as err: |
| if isinstance(err, KeyboardInterrupt): |
| bb.error('testimage interrupted, shutting down...') |
| else: |
| bb.error('runqemu failed, shutting down...') |
| if results: |
| results.stop() |
| results = tc.results |
| finally: |
| signal.signal(signal.SIGTERM, orig_sigterm_handler) |
| tc.target.stop() |
| |
| # Show results (if we have them) |
| if results: |
| configuration = get_testimage_configuration(d, 'runtime', machine) |
| results.logDetails(get_testimage_json_result_dir(d), |
| configuration, |
| get_testimage_result_id(configuration), |
| dump_streams=d.getVar('TESTREPORT_FULLLOGS')) |
| results.logSummary(pn) |
| |
| # Copy additional logs to tmp/log/oeqa so it's easier to find them |
| targetdir = os.path.join(get_testimage_json_result_dir(d), d.getVar("PN")) |
| os.makedirs(targetdir, exist_ok=True) |
| os.symlink(bootlog, os.path.join(targetdir, os.path.basename(bootlog))) |
| os.symlink(d.getVar("BB_LOGFILE"), os.path.join(targetdir, os.path.basename(d.getVar("BB_LOGFILE") + "." + d.getVar('DATETIME')))) |
| |
| if not results or not complete: |
| bb.fatal('%s - FAILED - tests were interrupted during execution, check the logs in %s' % (pn, d.getVar("LOG_DIR")), forcelog=True) |
| if not results.wasSuccessful(): |
| bb.fatal('%s - FAILED - also check the logs in %s' % (pn, d.getVar("LOG_DIR")), forcelog=True) |
| |
| def get_runtime_paths(d): |
| """ |
| Returns a list of paths where runtime test must reside. |
| |
| Runtime tests are expected in <LAYER_DIR>/lib/oeqa/runtime/cases/ |
| """ |
| paths = [] |
| |
| for layer in d.getVar('BBLAYERS').split(): |
| path = os.path.join(layer, 'lib/oeqa/runtime/cases') |
| if os.path.isdir(path): |
| paths.append(path) |
| return paths |
| |
| def create_index(arg): |
| import subprocess |
| |
| index_cmd = arg |
| try: |
| bb.note("Executing '%s' ..." % index_cmd) |
| result = subprocess.check_output(index_cmd, |
| stderr=subprocess.STDOUT, |
| shell=True) |
| result = result.decode('utf-8') |
| except subprocess.CalledProcessError as e: |
| return("Index creation command '%s' failed with return code " |
| '%d:\n%s' % (e.cmd, e.returncode, e.output.decode("utf-8"))) |
| if result: |
| bb.note(result) |
| return None |
| |
| def create_rpm_index(d): |
| import glob |
| # Index RPMs |
| rpm_createrepo = bb.utils.which(os.getenv('PATH'), "createrepo_c") |
| index_cmds = [] |
| archs = (d.getVar('ALL_MULTILIB_PACKAGE_ARCHS') or '').replace('-', '_') |
| |
| for arch in archs.split(): |
| rpm_dir = os.path.join(d.getVar('DEPLOY_DIR_RPM'), arch) |
| idx_path = os.path.join(d.getVar('WORKDIR'), 'oe-testimage-repo', arch) |
| |
| if not os.path.isdir(rpm_dir): |
| continue |
| |
| lockfilename = os.path.join(d.getVar('DEPLOY_DIR_RPM'), 'rpm.lock') |
| lf = bb.utils.lockfile(lockfilename, False) |
| oe.path.copyhardlinktree(rpm_dir, idx_path) |
| # Full indexes overload a 256MB image so reduce the number of rpms |
| # in the feed by filtering to specific packages needed by the tests. |
| package_list = glob.glob(idx_path + "*/*.rpm") |
| |
| for pkg in package_list: |
| if not os.path.basename(pkg).startswith(("rpm", "run-postinsts", "busybox", "bash", "update-alternatives", "libc6", "curl", "musl")): |
| bb.utils.remove(pkg) |
| |
| bb.utils.unlockfile(lf) |
| cmd = '%s --update -q %s' % (rpm_createrepo, idx_path) |
| |
| # Create repodata |
| result = create_index(cmd) |
| if result: |
| bb.fatal('%s' % ('\n'.join(result))) |
| |
| def package_extraction(d, test_suites): |
| from oeqa.utils.package_manager import find_packages_to_extract |
| from oeqa.utils.package_manager import extract_packages |
| |
| bb.utils.remove(d.getVar("TEST_NEEDED_PACKAGES_DIR"), recurse=True) |
| packages = find_packages_to_extract(test_suites) |
| if packages: |
| bb.utils.mkdirhier(d.getVar("TEST_INSTALL_TMP_DIR")) |
| bb.utils.mkdirhier(d.getVar("TEST_PACKAGED_DIR")) |
| bb.utils.mkdirhier(d.getVar("TEST_EXTRACTED_DIR")) |
| extract_packages(d, packages) |
| |
| testimage_main[vardepsexclude] += "BB_ORIGENV DATETIME" |
| |
| python () { |
| if oe.types.boolean(d.getVar("TESTIMAGE_AUTO") or "False"): |
| bb.build.addtask("testimage", "do_build", "do_image_complete", d) |
| } |
| |
| inherit testsdk |