meta-quanta: gsj: Modify fan threshold to hwomn
Modify fan threshold according to quanta thermal team
data and test on gsj board pass.
(From meta-quanta rev: faedc464d99c795be1805d280564709ee5c002f2)
Signed-off-by: Duke Du <Duke.Du@quantatw.com>
Change-Id: I7e93a25fe8ee79ab1f3fba879249ecf9043e5c97
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
diff --git a/meta-quanta/meta-gsj/recipes-phosphor/sensors/phosphor-hwmon/obmc/hwmon/ahb/apb/pwm-fan-controller@103000.conf b/meta-quanta/meta-gsj/recipes-phosphor/sensors/phosphor-hwmon/obmc/hwmon/ahb/apb/pwm-fan-controller@103000.conf
index 9eaee65..8b0e37e 100644
--- a/meta-quanta/meta-gsj/recipes-phosphor/sensors/phosphor-hwmon/obmc/hwmon/ahb/apb/pwm-fan-controller@103000.conf
+++ b/meta-quanta/meta-gsj/recipes-phosphor/sensors/phosphor-hwmon/obmc/hwmon/ahb/apb/pwm-fan-controller@103000.conf
@@ -1,8 +1,8 @@
LABEL_fan1= "Fan0_0_RPM"
TARGET_fan1= "Fan0_0_RPM"
-WARNHI_fan1= "19000"
-WARNLO_fan1= "230"
-CRITHI_fan1= "20000"
+WARNHI_fan1= "19250"
+WARNLO_fan1= "150"
+CRITHI_fan1= "19250"
CRITLO_fan1= "150"
MINVALUE_fan1 = "0"
MAXVALUE_fan1 = "20145"
@@ -11,9 +11,9 @@
LABEL_fan2= "Fan0_1_RPM"
TARGET_fan2= "Fan0_1_RPM"
-WARNHI_fan2= "19000"
-WARNLO_fan2= "230"
-CRITHI_fan2= "20000"
+WARNHI_fan2= "17600"
+WARNLO_fan2= "150"
+CRITHI_fan2= "17600"
CRITLO_fan2= "150"
MINVALUE_fan2 = "0"
MAXVALUE_fan2 = "20145"
@@ -22,9 +22,9 @@
LABEL_fan3= "Fan1_0_RPM"
TARGET_fan3= "Fan1_0_RPM"
-WARNHI_fan3= "19000"
-WARNLO_fan3= "230"
-CRITHI_fan3= "20000"
+WARNHI_fan3= "19250"
+WARNLO_fan3= "150"
+CRITHI_fan3= "19250"
CRITLO_fan3= "150"
MINVALUE_fan3 = "0"
MAXVALUE_fan3 = "20145"
@@ -33,9 +33,9 @@
LABEL_fan4= "Fan1_1_RPM"
TARGET_fan4= "Fan1_1_RPM"
-WARNHI_fan4= "19000"
-WARNLO_fan4= "230"
-CRITHI_fan4= "20000"
+WARNHI_fan4= "17600"
+WARNLO_fan4= "150"
+CRITHI_fan4= "17600"
CRITLO_fan4= "150"
MINVALUE_fan4 = "0"
MAXVALUE_fan4 = "20145"
@@ -44,9 +44,9 @@
LABEL_fan5= "Fan2_0_RPM"
TARGET_fan5= "Fan2_0_RPM"
-WARNHI_fan5= "19000"
-WARNLO_fan5= "230"
-CRITHI_fan5= "20000"
+WARNHI_fan5= "19250"
+WARNLO_fan5= "150"
+CRITHI_fan5= "19250"
CRITLO_fan5= "150"
MINVALUE_fan5 = "0"
MAXVALUE_fan5 = "20145"
@@ -55,11 +55,11 @@
LABEL_fan6= "Fan2_1_RPM"
TARGET_fan6= "Fan2_1_RPM"
-WARNHI_fan6= "19000"
-WARNLO_fan6= "230"
-CRITHI_fan6= "20000"
+WARNHI_fan6= "17600"
+WARNLO_fan6= "150"
+CRITHI_fan6= "17600"
CRITLO_fan6= "150"
MINVALUE_fan6 = "0"
MAXVALUE_fan6 = "20145"
PWM_TARGET_fan6 = 3
-EVENT_fan6= "WARNHI,WARNLO,CRITHI,CRITLO"
\ No newline at end of file
+EVENT_fan6= "WARNHI,WARNLO,CRITHI,CRITLO"