| #!/bin/bash |
| # |
| # Handle running OE images standalone with QEMU |
| # |
| # Copyright (C) 2006-2011 Linux Foundation |
| # |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License version 2 as |
| # published by the Free Software Foundation. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License along |
| # with this program; if not, write to the Free Software Foundation, Inc., |
| # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
| |
| usage() { |
| MYNAME=`basename $0` |
| echo "" |
| echo "Usage: you can run this script with any valid combination" |
| echo "of the following environment variables (in any order):" |
| echo " QEMUARCH - the qemu machine architecture to use" |
| echo " KERNEL - the kernel image file to use" |
| echo " ROOTFS - the rootfs image file or nfsroot directory to use" |
| echo " MACHINE - the machine name (optional, autodetected from KERNEL filename if unspecified)" |
| echo " RAMFS - boot a ramfs-based image" |
| echo " ISO - boot an ISO image" |
| echo " VM - boot a virtual machine image (= a file representing a full disk with boot loader)" |
| echo " Simplified QEMU command-line options can be passed with:" |
| echo " nographic - disables video console" |
| echo " serial - enables a serial console on /dev/ttyS0" |
| echo " kvm - enables KVM when running qemux86/qemux86-64 (VT-capable CPU required)" |
| echo " kvm-vhost - enables KVM with vhost support when running qemux86/qemux86-64 (VT-capable CPU required)" |
| echo " publicvnc - enable a VNC server open to all hosts" |
| echo " qemuparams=\"xyz\" - specify custom parameters to QEMU" |
| echo " bootparams=\"xyz\" - specify custom kernel parameters during boot" |
| echo "" |
| echo "Examples:" |
| echo " $MYNAME qemuarm" |
| echo " $MYNAME qemux86-64 core-image-sato ext4" |
| echo " $MYNAME path/to/bzImage-qemux86.bin path/to/nfsrootdir/ serial" |
| echo " $MYNAME qemux86 ramfs" |
| echo " $MYNAME qemux86 iso" |
| echo " $MYNAME qemux86 qemuparams=\"-m 256\"" |
| echo " $MYNAME qemux86 bootparams=\"psplash=false\"" |
| echo " $MYNAME path/to/<image>-<machine>.vmdk" |
| exit 1 |
| } |
| |
| if [ "x$1" = "x" ]; then |
| usage |
| fi |
| |
| error() { |
| echo "Error: "$* |
| usage |
| } |
| |
| MACHINE=${MACHINE:=""} |
| KERNEL=${KERNEL:=""} |
| ROOTFS=${ROOTFS:=""} |
| VM=${VM:=""} |
| FSTYPE=${FSTYPE:=""} |
| LAZY_ROOTFS="" |
| SCRIPT_QEMU_OPT="" |
| SCRIPT_QEMU_EXTRA_OPT="" |
| SCRIPT_KERNEL_OPT="" |
| SERIALSTDIO="" |
| TCPSERIAL_PORTNUM="" |
| KVM_ENABLED="no" |
| KVM_ACTIVE="no" |
| VHOST_ENABLED="no" |
| VHOST_ACTIVE="no" |
| |
| # Determine whether the file is a kernel or QEMU image, and set the |
| # appropriate variables |
| process_filename() { |
| filename=$1 |
| |
| # Extract the filename extension |
| EXT=`echo $filename | awk -F . '{ print \$NF }'` |
| case /$EXT/ in |
| /bin/) |
| # A file ending in .bin is a kernel |
| [ -z "$KERNEL" ] && KERNEL=$filename || \ |
| error "conflicting KERNEL args [$KERNEL] and [$filename]" |
| ;; |
| /ext[234]/|/jffs2/|/btrfs/) |
| # A file ending in a supportted fs type is a rootfs image |
| if [ -z "$FSTYPE" -o "$FSTYPE" = "$EXT" ]; then |
| FSTYPE=$EXT |
| ROOTFS=$filename |
| else |
| error "conflicting FSTYPE types [$FSTYPE] and [$EXT]" |
| fi |
| ;; |
| /hddimg/|/hdddirect/|/vmdk/) |
| FSTYPE=$EXT |
| VM=$filename |
| ;; |
| *) |
| error "unknown file arg [$filename]" |
| ;; |
| esac |
| } |
| |
| # Parse command line args without requiring specific ordering. It's a |
| # bit more complex, but offers a great user experience. |
| while true; do |
| arg=${1} |
| case "$arg" in |
| "qemux86" | "qemux86-64" | "qemuarm" | "qemuarm64" | "qemumips" | "qemumipsel" | \ |
| "qemumips64" | "qemush4" | "qemuppc" | "qemumicroblaze" | "qemuzynq") |
| [ -z "$MACHINE" -o "$MACHINE" = "$arg" ] && MACHINE=$arg || \ |
| error "conflicting MACHINE types [$MACHINE] and [$arg]" |
| ;; |
| "ext2" | "ext3" | "ext4" | "jffs2" | "nfs" | "btrfs" | "hddimg" | "hdddirect" ) |
| [ -z "$FSTYPE" -o "$FSTYPE" = "$arg" ] && FSTYPE=$arg || \ |
| error "conflicting FSTYPE types [$FSTYPE] and [$arg]" |
| ;; |
| "ramfs") |
| FSTYPE=cpio.gz |
| RAMFS=true |
| ;; |
| "iso") |
| FSTYPE=iso |
| ISOFS=true |
| ;; |
| "nographic") |
| SCRIPT_QEMU_OPT="$SCRIPT_QEMU_OPT -nographic" |
| SCRIPT_KERNEL_OPT="$SCRIPT_KERNEL_OPT console=ttyS0" |
| ;; |
| "serial") |
| SCRIPT_QEMU_OPT="$SCRIPT_QEMU_OPT -serial stdio" |
| SCRIPT_KERNEL_OPT="$SCRIPT_KERNEL_OPT console=ttyS0" |
| SERIALSTDIO="1" |
| ;; |
| "tcpserial="*) |
| TCPSERIAL_PORTNUM=${arg##tcpserial=} |
| ;; |
| "biosdir="*) |
| CUSTOMBIOSDIR="${arg##biosdir=}" |
| ;; |
| "biosfilename="*) |
| SCRIPT_QEMU_OPT="$SCRIPT_QEMU_OPT -bios ${arg##biosfilename=}" |
| ;; |
| "qemuparams="*) |
| SCRIPT_QEMU_EXTRA_OPT="${arg##qemuparams=}" |
| |
| # Warn user if they try to specify serial or kvm options |
| # to use simplified options instead |
| serial_option=`expr "$SCRIPT_QEMU_EXTRA_OPT" : '.*\(-serial\)'` |
| kvm_option=`expr "$SCRIPT_QEMU_EXTRA_OPT" : '.*\(-enable-kvm\)'` |
| vga_option=`expr "$SCRIPT_QEMU_EXTRA_OPT" : '.*\(-vga\)'` |
| [ ! -z "$serial_option" -o ! -z "$kvm_option" ] && \ |
| echo "Please use simplified serial or kvm options instead" |
| ;; |
| "bootparams="*) |
| SCRIPT_KERNEL_OPT="$SCRIPT_KERNEL_OPT ${arg##bootparams=}" |
| ;; |
| "audio") |
| if [ "x$MACHINE" = "xqemux86" -o "x$MACHINE" = "xqemux86-64" ]; then |
| echo "Enabling audio in qemu." |
| echo "Please install snd_intel8x0 or snd_ens1370 driver in linux guest." |
| QEMU_AUDIO_DRV="alsa" |
| SCRIPT_QEMU_OPT="$SCRIPT_QEMU_OPT -soundhw ac97,es1370" |
| fi |
| ;; |
| "kvm") |
| KVM_ENABLED="yes" |
| KVM_CAPABLE=`grep -q 'vmx\|svm' /proc/cpuinfo && echo 1` |
| ;; |
| "kvm-vhost") |
| KVM_ENABLED="yes" |
| KVM_CAPABLE=`grep -q 'vmx\|svm' /proc/cpuinfo && echo 1` |
| VHOST_ENABLED="yes" |
| ;; |
| "slirp") |
| SLIRP_ENABLED="yes" |
| ;; |
| "publicvnc") |
| SCRIPT_QEMU_OPT="$SCRIPT_QEMU_OPT -vnc 0.0.0.0:0" |
| ;; |
| *-image*) |
| [ -z "$ROOTFS" ] || \ |
| error "conflicting ROOTFS args [$ROOTFS] and [$arg]" |
| if [ -f "$arg" ]; then |
| process_filename $arg |
| elif [ -d "$arg" ]; then |
| # Handle the case where the nfsroot dir has -image- |
| # in the pathname |
| echo "Assuming $arg is an nfs rootfs" |
| FSTYPE=nfs |
| ROOTFS=$arg |
| else |
| ROOTFS=$arg |
| LAZY_ROOTFS="true" |
| fi |
| ;; |
| "") break ;; |
| *) |
| # A directory name is an nfs rootfs |
| if [ -d "$arg" ]; then |
| echo "Assuming $arg is an nfs rootfs" |
| if [ -z "$FSTYPE" -o "$FSTYPE" = "nfs" ]; then |
| FSTYPE=nfs |
| else |
| error "conflicting FSTYPE types [$arg] and nfs" |
| fi |
| |
| if [ -z "$ROOTFS" ]; then |
| ROOTFS=$arg |
| else |
| error "conflicting ROOTFS args [$ROOTFS] and [$arg]" |
| fi |
| elif [ -f "$arg" ]; then |
| process_filename $arg |
| else |
| error "unable to classify arg [$arg]" |
| fi |
| ;; |
| esac |
| shift |
| done |
| |
| if [ ! -c /dev/net/tun ] ; then |
| echo "TUN control device /dev/net/tun is unavailable; you may need to enable TUN (e.g. sudo modprobe tun)" |
| exit 1 |
| elif [ ! -w /dev/net/tun ] ; then |
| echo "TUN control device /dev/net/tun is not writable, please fix (e.g. sudo chmod 666 /dev/net/tun)" |
| exit 1 |
| fi |
| |
| # Report errors for missing combinations of options |
| if [ -z "$MACHINE" -a -z "$KERNEL" -a -z "$VM" ]; then |
| error "you must specify at least a MACHINE, VM, or KERNEL argument" |
| fi |
| if [ "$FSTYPE" = "nfs" -a -z "$ROOTFS" ]; then |
| error "NFS booting without an explicit ROOTFS path is not yet supported" |
| fi |
| |
| if [ -z "$MACHINE" ]; then |
| if [ "x$FSTYPE" = "xvmdk" ] || [ "x$FSTYPE" = "xhddimg" ] || [ "x$FSTYPE" = "xhdddirect" ]; then |
| MACHINE=`basename $VM | sed -n 's/.*\(qemux86-64\|qemux86\|qemuarm64\|qemuarm\|qemumips64\|qemumips\|qemuppc\|qemush4\).*/\1/p'` |
| if [ -z "$MACHINE" ]; then |
| error "Unable to set MACHINE from image filename [$VM]" |
| fi |
| echo "Set MACHINE to [$MACHINE] based on image [$VM]" |
| else |
| MACHINE=`basename $KERNEL | sed -n 's/.*\(qemux86-64\|qemux86\|qemuarm64\|qemuarm\|qemumips64\|qemumips\|qemuppc\|qemush4\).*/\1/p'` |
| if [ -z "$MACHINE" ]; then |
| error "Unable to set MACHINE from kernel filename [$KERNEL]" |
| fi |
| echo "Set MACHINE to [$MACHINE] based on kernel [$KERNEL]" |
| fi |
| fi |
| |
| YOCTO_KVM_WIKI="https://wiki.yoctoproject.org/wiki/How_to_enable_KVM_for_Poky_qemu" |
| YOCTO_PARAVIRT_KVM_WIKI="https://wiki.yoctoproject.org/wiki/Running_an_x86_Yocto_Linux_image_under_QEMU_KVM" |
| # Detect KVM configuration |
| if [ "x$KVM_ENABLED" = "xyes" ]; then |
| if [ -z "$KVM_CAPABLE" ]; then |
| echo "You are trying to enable KVM on a cpu without VT support." |
| echo "Remove kvm from the command-line, or refer" |
| echo "$YOCTO_KVM_WIKI"; |
| exit 1; |
| fi |
| if [ "x$MACHINE" != "xqemux86" -a "x$MACHINE" != "xqemux86-64" ]; then |
| echo "KVM only support x86 & x86-64. Remove kvm from the command-line"; |
| exit 1; |
| fi |
| if [ ! -e /dev/kvm ]; then |
| echo "Missing KVM device. Have you inserted kvm modules?" |
| echo "For further help see:" |
| echo "$YOCTO_KVM_WIKI"; |
| exit 1; |
| fi |
| if [ -w /dev/kvm -a -r /dev/kvm ]; then |
| SCRIPT_QEMU_OPT="$SCRIPT_QEMU_OPT -enable-kvm" |
| KVM_ACTIVE="yes" |
| else |
| echo "You have no rights on /dev/kvm." |
| echo "Please change the ownership of this file as described at:" |
| echo "$YOCTO_KVM_WIKI"; |
| exit 1; |
| fi |
| if [ "x$VHOST_ENABLED" = "xyes" ]; then |
| if [ ! -e /dev/vhost-net ]; then |
| echo "Missing virtio net device. Have you inserted vhost-net module?" |
| echo "For further help see:" |
| echo "$YOCTO_PARAVIRT_KVM_WIKI"; |
| exit 1; |
| fi |
| |
| if [ -w /dev/vhost-net -a -r /dev/vhost-net ]; then |
| VHOST_ACTIVE="yes" |
| else |
| echo "You have no rights on /dev/vhost-net." |
| echo "Please change the ownership of this file as described at:" |
| echo "$YOCTO_KVM_WIKI"; |
| exit 1; |
| fi |
| fi |
| fi |
| |
| machine2=`echo $MACHINE | tr 'a-z' 'A-Z' | sed 's/-/_/'` |
| # MACHINE is now set for all cases |
| |
| # Defaults used when these vars need to be inferred |
| QEMUX86_DEFAULT_KERNEL=bzImage-qemux86.bin |
| QEMUX86_DEFAULT_FSTYPE=ext4 |
| |
| QEMUX86_64_DEFAULT_KERNEL=bzImage-qemux86-64.bin |
| QEMUX86_64_DEFAULT_FSTYPE=ext4 |
| |
| QEMUARM_DEFAULT_KERNEL=zImage-qemuarm.bin |
| QEMUARM_DEFAULT_FSTYPE=ext4 |
| |
| QEMUARM64_DEFAULT_KERNEL=Image-qemuarm64.bin |
| QEMUARM64_DEFAULT_FSTYPE=ext4 |
| |
| QEMUMIPS_DEFAULT_KERNEL=vmlinux-qemumips.bin |
| QEMUMIPS_DEFAULT_FSTYPE=ext4 |
| |
| QEMUMIPSEL_DEFAULT_KERNEL=vmlinux-qemumipsel.bin |
| QEMUMIPSEL_DEFAULT_FSTYPE=ext4 |
| |
| QEMUMIPS64_DEFAULT_KERNEL=vmlinux-qemumips64.bin |
| QEMUMIPS64_DEFAULT_FSTYPE=ext4 |
| |
| QEMUSH4_DEFAULT_KERNEL=vmlinux-qemumips.bin |
| QEMUSH4_DEFAULT_FSTYPE=ext4 |
| |
| QEMUPPC_DEFAULT_KERNEL=vmlinux-qemuppc.bin |
| QEMUPPC_DEFAULT_FSTYPE=ext4 |
| |
| QEMUMICROBLAZE_DEFAULT_KERNEL=linux.bin.ub |
| QEMUMICROBLAZE_DEFAULT_FSTYPE=cpio |
| |
| QEMUZYNQ_DEFAULT_KERNEL=uImage |
| QEMUZYNQ_DEFAULT_FSTYPE=cpio |
| |
| AKITA_DEFAULT_KERNEL=zImage-akita.bin |
| AKITA_DEFAULT_FSTYPE=jffs2 |
| |
| SPITZ_DEFAULT_KERNEL=zImage-spitz.bin |
| SPITZ_DEFAULT_FSTYPE=ext3 |
| |
| setup_path_vars() { |
| if [ -z "$OE_TMPDIR" ] ; then |
| PATHS_REQUIRED=true |
| elif [ "$1" = "1" -a -z "$DEPLOY_DIR_IMAGE" ] ; then |
| PATHS_REQUIRED=true |
| else |
| PATHS_REQUIRED=false |
| fi |
| |
| if [ "$PATHS_REQUIRED" = "true" ]; then |
| # Try to get the variable values from bitbake |
| type -P bitbake &>/dev/null || { |
| echo "In order for this script to dynamically infer paths"; |
| echo "to kernels or filesystem images, you either need"; |
| echo "bitbake in your PATH or to source oe-init-build-env"; |
| echo "before running this script" >&2; |
| exit 1; } |
| |
| # We have bitbake in PATH, get the variable values from bitbake |
| BITBAKE_ENV_TMPFILE=`mktemp --tmpdir runqemu.XXXXXXXXXX` |
| if [ "$?" != "0" ] ; then |
| echo "Error: mktemp failed for bitbake environment output" |
| exit 1 |
| fi |
| |
| MACHINE=$MACHINE bitbake -e > $BITBAKE_ENV_TMPFILE |
| if [ -z "$OE_TMPDIR" ] ; then |
| OE_TMPDIR=`sed -n 's/^TMPDIR=\"\(.*\)\"/\1/p' $BITBAKE_ENV_TMPFILE` |
| fi |
| if [ -z "$DEPLOY_DIR_IMAGE" ] ; then |
| DEPLOY_DIR_IMAGE=`sed -n 's/^DEPLOY_DIR_IMAGE=\"\(.*\)\"/\1/p' $BITBAKE_ENV_TMPFILE` |
| fi |
| if [ -z "$OE_TMPDIR" ]; then |
| # Check for errors from bitbake that the user needs to know about |
| BITBAKE_OUTPUT=`cat $BITBAKE_ENV_TMPFILE | wc -l` |
| if [ "$BITBAKE_OUTPUT" -eq "0" ]; then |
| echo "Error: this script needs to be run from your build directory, or you need" |
| echo "to explicitly set OE_TMPDIR and DEPLOY_DIR_IMAGE in your environment" |
| else |
| echo "There was an error running bitbake to determine TMPDIR" |
| echo "Here is the output from 'bitbake -e':" |
| cat $BITBAKE_ENV_TMPFILE |
| fi |
| rm $BITBAKE_ENV_TMPFILE |
| exit 1 |
| fi |
| rm $BITBAKE_ENV_TMPFILE |
| fi |
| } |
| |
| setup_sysroot() { |
| # Toolchain installs set up $OECORE_NATIVE_SYSROOT in their |
| # environment script. If that variable isn't set, we're |
| # either in an in-tree build scenario or the environment |
| # script wasn't source'd. |
| if [ -z "$OECORE_NATIVE_SYSROOT" ]; then |
| setup_path_vars |
| BUILD_ARCH=`uname -m` |
| BUILD_OS=`uname | tr '[A-Z]' '[a-z]'` |
| BUILD_SYS="$BUILD_ARCH-$BUILD_OS" |
| |
| OECORE_NATIVE_SYSROOT=$OE_TMPDIR/sysroots/$BUILD_SYS |
| fi |
| |
| # Some recipes store the BIOS under $OE_TMPDIR/sysroots/$MACHINE, |
| # now defined as OECORE_MACHINE_SYSROOT. The latter is used when searching |
| # BIOS, VGA BIOS and keymaps. |
| if [ -z "$OECORE_MACHINE_SYSROOT" ]; then |
| OECORE_MACHINE_SYSROOT=$OE_TMPDIR/sysroots/$MACHINE |
| fi |
| } |
| |
| # Locate a rootfs image to boot which matches our expected |
| # machine and fstype. |
| findimage() { |
| where=$1 |
| machine=$2 |
| extension=$3 |
| |
| # Sort rootfs candidates by modification time - the most |
| # recently created one is the one we most likely want to boot. |
| filename=`ls -t1 $where/*-image*$machine.$extension 2>/dev/null | head -n1` |
| if [ "x$filename" != "x" ]; then |
| ROOTFS=$filename |
| return |
| fi |
| |
| echo "Couldn't find a $machine rootfs image in $where." |
| exit 1 |
| } |
| |
| if [ -e "$ROOTFS" -a -z "$FSTYPE" ]; then |
| # Extract the filename extension |
| EXT=`echo $ROOTFS | awk -F . '{ print \$NF }'` |
| if [ "x$EXT" = "xext2" -o "x$EXT" = "xext3" -o \ |
| "x$EXT" = "xjffs2" -o "x$EXT" = "xbtrfs" -o \ |
| "x$EXT" = "xext4" ]; then |
| FSTYPE=$EXT |
| else |
| echo "Note: Unable to determine filesystem extension for $ROOTFS" |
| echo "We will use the default FSTYPE for $MACHINE" |
| # ...which is done further below... |
| fi |
| fi |
| |
| if [ -z "$KERNEL" -a "x$FSTYPE" != "xvmdk" -a "x$FSTYPE" != "xhddimg" -a "x$FSTYPE" != "xhdddirect" ]; then |
| setup_path_vars 1 |
| eval kernel_file=\$${machine2}_DEFAULT_KERNEL |
| KERNEL=$DEPLOY_DIR_IMAGE/$kernel_file |
| |
| if [ -z "$KERNEL" ]; then |
| error "Unable to determine default kernel for MACHINE [$MACHINE]" |
| fi |
| fi |
| # KERNEL is now set for all cases |
| |
| if [ -z "$FSTYPE" ]; then |
| eval FSTYPE=\$${machine2}_DEFAULT_FSTYPE |
| |
| if [ -z "$FSTYPE" ]; then |
| error "Unable to determine default fstype for MACHINE [$MACHINE]" |
| fi |
| fi |
| |
| # FSTYPE is now set for all cases |
| |
| # Handle cases where a ROOTFS type is given instead of a filename, e.g. |
| # core-image-sato |
| if [ "$LAZY_ROOTFS" = "true" ]; then |
| setup_path_vars 1 |
| echo "Assuming $ROOTFS really means $DEPLOY_DIR_IMAGE/$ROOTFS-$MACHINE.$FSTYPE" |
| if [ "$FSTYPE" = "hddimg" -o "x$FSTYPE" = "xhdddirect" ]; then |
| VM=$DEPLOY_DIR_IMAGE/$ROOTFS-$MACHINE.$FSTYPE |
| else |
| ROOTFS=$DEPLOY_DIR_IMAGE/$ROOTFS-$MACHINE.$FSTYPE |
| fi |
| fi |
| |
| if [ -z "$ROOTFS" -a "x$FSTYPE" != "xvmdk" -a "x$FSTYPE" != "xhddimg" -a "x$FSTYPE" != "xhdddirect" ]; then |
| setup_path_vars 1 |
| T=$DEPLOY_DIR_IMAGE |
| eval rootfs_list=\$${machine2}_DEFAULT_ROOTFS |
| findimage $T $MACHINE $FSTYPE |
| |
| if [ -z "$ROOTFS" ]; then |
| error "Unable to determine default rootfs for MACHINE [$MACHINE]" |
| fi |
| fi |
| # ROOTFS is now set for all cases, now expand it to be an absolute path, it should exist at this point |
| |
| ROOTFS=`readlink -f $ROOTFS` |
| |
| echo "" |
| echo "Continuing with the following parameters:" |
| if [ "x$FSTYPE" != "xvmdk" -a "x$FSTYPE" != "xhddimg" -a "x$FSTYPE" != "xhdddirect" ]; then |
| echo "KERNEL: [$KERNEL]" |
| echo "ROOTFS: [$ROOTFS]" |
| else |
| echo "VMDK: [$VM]" |
| fi |
| echo "FSTYPE: [$FSTYPE]" |
| |
| setup_sysroot |
| # OECORE_NATIVE_SYSROOT and OECORE_MACHINE_SYSROOT are now set for all cases |
| |
| INTERNAL_SCRIPT="$0-internal" |
| if [ ! -f "$INTERNAL_SCRIPT" -o ! -r "$INTERNAL_SCRIPT" ]; then |
| INTERNAL_SCRIPT=`which runqemu-internal` |
| fi |
| |
| # Specify directory for BIOS, VGA BIOS and keymaps |
| if [ ! -z "$CUSTOMBIOSDIR" ]; then |
| if [ -d "$OECORE_NATIVE_SYSROOT/$CUSTOMBIOSDIR" ]; then |
| echo "Assuming biosdir is $OECORE_NATIVE_SYSROOT/$CUSTOMBIOSDIR" |
| SCRIPT_QEMU_OPT="$SCRIPT_QEMU_OPT -L $OECORE_NATIVE_SYSROOT/$CUSTOMBIOSDIR" |
| elif [ -d "$OECORE_MACHINE_SYSROOT/$CUSTOMBIOSDIR" ]; then |
| echo "Assuming biosdir is $OECORE_MACHINE_SYSROOT/$CUSTOMBIOSDIR" |
| SCRIPT_QEMU_OPT="$SCRIPT_QEMU_OPT -L $OECORE_MACHINE_SYSROOT/$CUSTOMBIOSDIR" |
| else |
| if [ ! -d "$CUSTOMBIOSDIR" ]; then |
| echo "Custom BIOS directory not found. Tried: $CUSTOMBIOSDIR" |
| echo "and $OECORE_NATIVE_SYSROOT/$CUSTOMBIOSDIR" |
| echo "and $OECORE_MACHINE_SYSROOT/$CUSTOMBIOSDIR" |
| exit 1; |
| fi |
| echo "Assuming biosdir is $CUSTOMBIOSDIR" |
| SCRIPT_QEMU_OPT="$SCRIPT_QEMU_OPT -L $CUSTOMBIOSDIR" |
| fi |
| fi |
| |
| . $INTERNAL_SCRIPT |
| exit $? |