blob: 4ec64f5e2926f7ae9d95d4cbd1ad29e0a5d784da [file] [log] [blame]
/dts-v1/;
/include/ "zynq-7000.dtsi"
/include/ "zynq-7000-qspi-dummy.dtsi"
/ {
model = "Avnet picoZed";
compatible = "avnet,picozed", "xlnx,zynq-7000";
aliases {
ethernet0 = &gem0;
serial0 = &uart1;
};
memory {
device_type = "memory";
reg = <0x0 0x40000000>;
};
chosen {
bootargs = "earlyprintk";
stdout-path = "serial0:115200n8";
};
usb_phy0: phy0 {
compatible = "usb-nop-xceiv";
#phy-cells = <0>;
reset-gpios = <&gpio0 7 1>; /* MIO 7, GPIO_ACTIVE_LOW */
};
};
&gem0 {
status = "okay";
phy-mode = "rgmii-id";
phy-handle = <&ethernet_phy>;
ethernet_phy: ethernet-phy@0 {
compatible = "marvell,88e1512";
device_type = "ethernet-phy";
reg = <0>;
};
};
&sdhci1 {
status = "okay";
/* SD1 is onnected to a non-removable eMMC flash device */
non-removable;
};
&uart1 {
status = "okay";
};
&usb0 {
status = "okay";
dr_mode = "host";
usb-phy = <&usb_phy0>;
};
&qspi {
status = "okay";
primary_flash: ps7-qspi@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,m25p80", "spansion,s25fl128s", "jedec,spi-nor";
reg = <0x0>;
spi-max-frequency = <50000000>;
/* Example 16M partition table using U-Boot + U-Boot SPL */
partition@0x0 {
label = "boot";
reg = <0x0 0xe0000>;
};
partition@0xe0000 {
label = "ubootenv";
reg = <0xe0000 0x20000>;
};
partition@0x100000 {
label = "uboot";
reg = <0x100000 0x100000>;
};
partition@0x200000 {
label = "kernel";
reg = <0x200000 0x4f0000>;
};
partition@0x6f0000 {
label = "devicetree";
reg = <0x6f0000 0x10000>;
};
partition@0x700000 {
label = "rootfs";
reg = <0x700000 0x400000>;
};
partition@0xb00000 {
label = "spare";
reg = <0xb00000 0x500000>;
};
};
};