blob: 5c76ed23912eea60c5b450a80a95805c25785bed [file] [log] [blame]
<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"
[<!ENTITY % poky SYSTEM "../poky.ent"> %poky; ] >
<chapter id='kernel-dev-advanced'>
<title>Working with Advanced Metadata (<filename>yocto-kernel-cache</filename>)</title>
<section id='kernel-dev-advanced-overview'>
<title>Overview</title>
<para>
In addition to supporting configuration fragments and patches, the
Yocto Project kernel tools also support rich
<ulink url='&YOCTO_DOCS_REF_URL;#metadata'>Metadata</ulink> that you can
use to define complex policies and Board Support Package (BSP) support.
The purpose of the Metadata and the tools that manage it is
to help you manage the complexity of the configuration and sources
used to support multiple BSPs and Linux kernel types.
</para>
<para>
Kernel Metadata exists in many places.
One area in the Yocto Project
<ulink url='&YOCTO_DOCS_OM_URL;#source-repositories'>Source Repositories</ulink>
is the <filename>yocto-kernel-cache</filename> Git repository.
You can find this repository grouped under the "Yocto Linux Kernel"
heading in the
<ulink url='&YOCTO_GIT_URL;'>Yocto Project Source Repositories</ulink>.
</para>
<para>
Kernel development tools ("kern-tools") exist also in the Yocto
Project Source Repositories under the "Yocto Linux Kernel" heading
in the <filename>yocto-kernel-tools</filename> Git repository.
The recipe that builds these tools is
<filename>meta/recipes-kernel/kern-tools/kern-tools-native_git.bb</filename>
in the
<ulink url='&YOCTO_DOCS_REF_URL;#source-directory'>Source Directory</ulink>
(e.g. <filename>poky</filename>).
</para>
</section>
<section id='using-kernel-metadata-in-a-recipe'>
<title>Using Kernel Metadata in a Recipe</title>
<para>
As mentioned in the introduction, the Yocto Project contains kernel
Metadata, which is located in the
<filename>yocto-kernel-cache</filename> Git repository.
This Metadata defines Board Support Packages (BSPs) that
correspond to definitions in linux-yocto recipes for corresponding BSPs.
A BSP consists of an aggregation of kernel policy and enabled
hardware-specific features.
The BSP can be influenced from within the linux-yocto recipe.
<note>
A Linux kernel recipe that contains kernel Metadata (e.g.
inherits from the <filename>linux-yocto.inc</filename> file)
is said to be a "linux-yocto style" recipe.
</note>
</para>
<para>
Every linux-yocto style recipe must define the
<ulink url='&YOCTO_DOCS_REF_URL;#var-KMACHINE'><filename>KMACHINE</filename></ulink>
variable.
This variable is typically set to the same value as the
<filename>MACHINE</filename> variable, which is used by
<ulink url='&YOCTO_DOCS_REF_URL;#bitbake-term'>BitBake</ulink>.
However, in some cases, the variable might instead refer to the
underlying platform of the <filename>MACHINE</filename>.
</para>
<para>
Multiple BSPs can reuse the same <filename>KMACHINE</filename>
name if they are built using the same BSP description.
Multiple Corei7-based BSPs could share the same "intel-corei7-64"
value for <filename>KMACHINE</filename>.
It is important to realize that <filename>KMACHINE</filename> is
just for kernel mapping, while <filename>MACHINE</filename>
is the machine type within a BSP Layer.
Even with this distinction, however, these two variables can hold
the same value.
See the <link linkend='bsp-descriptions'>BSP Descriptions</link>
section for more information.
</para>
<para>
Every linux-yocto style recipe must also indicate the Linux kernel
source repository branch used to build the Linux kernel.
The <ulink url='&YOCTO_DOCS_REF_URL;#var-KBRANCH'><filename>KBRANCH</filename></ulink>
variable must be set to indicate the branch.
<note>
You can use the <filename>KBRANCH</filename> value to define an
alternate branch typically with a machine override as shown here
from the <filename>meta-yocto-bsp</filename> layer:
<literallayout class='monospaced'>
KBRANCH_edgerouter = "standard/edgerouter"
</literallayout>
</note>
</para>
<para>
The linux-yocto style recipes can optionally define the following
variables:
<literallayout class='monospaced'>
KERNEL_FEATURES
LINUX_KERNEL_TYPE
</literallayout>
</para>
<para>
<ulink url='&YOCTO_DOCS_REF_URL;#var-LINUX_KERNEL_TYPE'><filename>LINUX_KERNEL_TYPE</filename></ulink>
defines the kernel type to be
used in assembling the configuration.
If you do not specify a <filename>LINUX_KERNEL_TYPE</filename>,
it defaults to "standard".
Together with <filename>KMACHINE</filename>,
<filename>LINUX_KERNEL_TYPE</filename> defines the search
arguments used by the kernel tools to find the
appropriate description within the kernel Metadata with which to
build out the sources and configuration.
The linux-yocto recipes define "standard", "tiny", and "preempt-rt"
kernel types.
See the "<link linkend='kernel-types'>Kernel Types</link>" section
for more information on kernel types.
</para>
<para>
During the build, the kern-tools search for the BSP description
file that most closely matches the <filename>KMACHINE</filename>
and <filename>LINUX_KERNEL_TYPE</filename> variables passed in from the
recipe.
The tools use the first BSP description it finds that match
both variables.
If the tools cannot find a match, they issue a warning.
</para>
<para>
The tools first search for the <filename>KMACHINE</filename> and
then for the <filename>LINUX_KERNEL_TYPE</filename>.
If the tools cannot find a partial match, they will use the
sources from the <filename>KBRANCH</filename> and any configuration
specified in the
<ulink url='&YOCTO_DOCS_REF_URL;#var-SRC_URI'><filename>SRC_URI</filename></ulink>.
</para>
<para>
You can use the
<ulink url='&YOCTO_DOCS_REF_URL;#var-KERNEL_FEATURES'><filename>KERNEL_FEATURES</filename></ulink>
variable
to include features (configuration fragments, patches, or both) that
are not already included by the <filename>KMACHINE</filename> and
<filename>LINUX_KERNEL_TYPE</filename> variable combination.
For example, to include a feature specified as
"features/netfilter/netfilter.scc",
specify:
<literallayout class='monospaced'>
KERNEL_FEATURES += "features/netfilter/netfilter.scc"
</literallayout>
To include a feature called "cfg/sound.scc" just for the
<filename>qemux86</filename> machine, specify:
<literallayout class='monospaced'>
KERNEL_FEATURES_append_qemux86 = " cfg/sound.scc"
</literallayout>
The value of the entries in <filename>KERNEL_FEATURES</filename>
are dependent on their location within the kernel Metadata itself.
The examples here are taken from the
<filename>yocto-kernel-cache</filename> repository.
Each branch of this repository contains "features" and "cfg"
subdirectories at the top-level.
For more information, see the
"<link linkend='kernel-metadata-syntax'>Kernel Metadata Syntax</link>"
section.
</para>
</section>
<section id='kernel-metadata-syntax'>
<title>Kernel Metadata Syntax</title>
<para>
The kernel Metadata consists of three primary types of files:
<filename>scc</filename>
<footnote>
<para>
<filename>scc</filename> stands for Series Configuration
Control, but the naming has less significance in the
current implementation of the tooling than it had in the
past.
Consider <filename>scc</filename> files to be description files.
</para>
</footnote>
description files, configuration fragments, and patches.
The <filename>scc</filename> files define variables and include or
otherwise reference any of the three file types.
The description files are used to aggregate all types of kernel
Metadata into
what ultimately describes the sources and the configuration required
to build a Linux kernel tailored to a specific machine.
</para>
<para>
The <filename>scc</filename> description files are used to define two
fundamental types of kernel Metadata:
<itemizedlist>
<listitem><para>Features</para></listitem>
<listitem><para>Board Support Packages (BSPs)</para></listitem>
</itemizedlist>
</para>
<para>
Features aggregate sources in the form of patches and configuration
fragments into a modular reusable unit.
You can use features to implement conceptually separate kernel
Metadata descriptions such as pure configuration fragments,
simple patches, complex features, and kernel types.
<link linkend='kernel-types'>Kernel types</link> define general
kernel features and policy to be reused in the BSPs.
</para>
<para>
BSPs define hardware-specific features and aggregate them with kernel
types to form the final description of what will be assembled and built.
</para>
<para>
While the kernel Metadata syntax does not enforce any logical
separation of configuration fragments, patches, features or kernel
types, best practices dictate a logical separation of these types
of Metadata.
The following Metadata file hierarchy is recommended:
<literallayout class='monospaced'>
<replaceable>base</replaceable>/
bsp/
cfg/
features/
ktypes/
patches/
</literallayout>
</para>
<para>
The <filename>bsp</filename> directory contains the
<link linkend='bsp-descriptions'>BSP descriptions</link>.
The remaining directories all contain "features".
Separating <filename>bsp</filename> from the rest of the structure
aids conceptualizing intended usage.
</para>
<para>
Use these guidelines to help place your <filename>scc</filename>
description files within the structure:
<itemizedlist>
<listitem><para>If your file contains
only configuration fragments, place the file in the
<filename>cfg</filename> directory.</para></listitem>
<listitem><para>If your file contains
only source-code fixes, place the file in the
<filename>patches</filename> directory.</para></listitem>
<listitem><para>If your file encapsulates
a major feature, often combining sources and configurations,
place the file in <filename>features</filename> directory.
</para></listitem>
<listitem><para>If your file aggregates
non-hardware configuration and patches in order to define a
base kernel policy or major kernel type to be reused across
multiple BSPs, place the file in <filename>ktypes</filename>
directory.
</para></listitem>
</itemizedlist>
</para>
<para>
These distinctions can easily become blurred - especially as
out-of-tree features slowly merge upstream over time.
Also, remember that how the description files are placed is
a purely logical organization and has no impact on the functionality
of the kernel Metadata.
There is no impact because all of <filename>cfg</filename>,
<filename>features</filename>, <filename>patches</filename>, and
<filename>ktypes</filename>, contain "features" as far as the kernel
tools are concerned.
</para>
<para>
Paths used in kernel Metadata files are relative to
<replaceable>base</replaceable>, which is either
<ulink url='&YOCTO_DOCS_REF_URL;#var-FILESEXTRAPATHS'><filename>FILESEXTRAPATHS</filename></ulink>
if you are creating Metadata in
<link linkend='recipe-space-metadata'>recipe-space</link>,
or the top level of
<ulink url='&YOCTO_GIT_URL;/cgit/cgit.cgi/yocto-kernel-cache/tree/'><filename>yocto-kernel-cache</filename></ulink>
if you are creating
<link linkend='metadata-outside-the-recipe-space'>Metadata outside of the recipe-space</link>.
</para>
<section id='configuration'>
<title>Configuration</title>
<para>
The simplest unit of kernel Metadata is the configuration-only
feature.
This feature consists of one or more Linux kernel configuration
parameters in a configuration fragment file
(<filename>.cfg</filename>) and a <filename>.scc</filename> file
that describes the fragment.
</para>
<para>
As an example, consider the Symmetric Multi-Processing (SMP)
fragment used with the <filename>linux-yocto-4.12</filename>
kernel as defined outside of the recipe space (i.e.
<filename>yocto-kernel-cache</filename>).
This Metadata consists of two files: <filename>smp.scc</filename>
and <filename>smp.cfg</filename>.
You can find these files in the <filename>cfg</filename> directory
of the <filename>yocto-4.12</filename> branch in the
<filename>yocto-kernel-cache</filename> Git repository:
<literallayout class='monospaced'>
cfg/smp.scc:
define KFEATURE_DESCRIPTION "Enable SMP for 32 bit builds"
define KFEATURE_COMPATIBILITY all
kconf hardware smp.cfg
cfg/smp.cfg:
CONFIG_SMP=y
CONFIG_SCHED_SMT=y
# Increase default NR_CPUS from 8 to 64 so that platform with
# more than 8 processors can be all activated at boot time
CONFIG_NR_CPUS=64
# The following is needed when setting NR_CPUS to something
# greater than 8 on x86 architectures, it should be automatically
# disregarded by Kconfig when using a different arch
CONFIG_X86_BIGSMP=y
</literallayout>
You can find general information on configuration fragment files in
the
"<link linkend='creating-config-fragments'>Creating Configuration Fragments</link>"
section.
</para>
<para>
Within the <filename>smp.scc</filename> file, the
<ulink url='&YOCTO_DOCS_REF_URL;#var-KFEATURE_DESCRIPTION'><filename>KFEATURE_DESCRIPTION</filename></ulink>
statement provides a short description of the fragment.
Higher level kernel tools use this description.
</para>
<para>
Also within the <filename>smp.scc</filename> file, the
<filename>kconf</filename> command includes the
actual configuration fragment in an <filename>.scc</filename>
file, and the "hardware" keyword identifies the fragment as
being hardware enabling, as opposed to general policy,
which would use the "non-hardware" keyword.
The distinction is made for the benefit of the configuration
validation tools, which warn you if a hardware fragment
overrides a policy set by a non-hardware fragment.
<note>
The description file can include multiple
<filename>kconf</filename> statements, one per fragment.
</note>
</para>
<para>
As described in the
"<link linkend='validating-configuration'>Validating Configuration</link>"
section, you can use the following BitBake command to audit your
configuration:
<literallayout class='monospaced'>
$ bitbake linux-yocto -c kernel_configcheck -f
</literallayout>
</para>
</section>
<section id='patches'>
<title>Patches</title>
<para>
Patch descriptions are very similar to configuration fragment
descriptions, which are described in the previous section.
However, instead of a <filename>.cfg</filename> file, these
descriptions work with source patches (i.e.
<filename>.patch</filename> files).
</para>
<para>
A typical patch includes a description file and the patch itself.
As an example, consider the build patches used with the
<filename>linux-yocto-4.12</filename> kernel as defined outside of
the recipe space (i.e. <filename>yocto-kernel-cache</filename>).
This Metadata consists of several files:
<filename>build.scc</filename> and a set of
<filename>*.patch</filename> files.
You can find these files in the <filename>patches/build</filename>
directory of the <filename>yocto-4.12</filename> branch in the
<filename>yocto-kernel-cache</filename> Git repository.
</para>
<para>
The following listings show the <filename>build.scc</filename>
file and part of the
<filename>modpost-mask-trivial-warnings.patch</filename> file:
<literallayout class='monospaced'>
patches/build/build.scc:
patch arm-serialize-build-targets.patch
patch powerpc-serialize-image-targets.patch
patch kbuild-exclude-meta-directory-from-distclean-processi.patch
# applied by kgit
# patch kbuild-add-meta-files-to-the-ignore-li.patch
patch modpost-mask-trivial-warnings.patch
patch menuconfig-check-lxdiaglog.sh-Allow-specification-of.patch
patches/build/modpost-mask-trivial-warnings.patch:
From bd48931bc142bdd104668f3a062a1f22600aae61 Mon Sep 17 00:00:00 2001
From: Paul Gortmaker &lt;paul.gortmaker@windriver.com&gt;
Date: Sun, 25 Jan 2009 17:58:09 -0500
Subject: [PATCH] modpost: mask trivial warnings
Newer HOSTCC will complain about various stdio fcns because
.
.
.
char *dump_write = NULL, *files_source = NULL;
int opt;
--
2.10.1
generated by cgit v0.10.2 at 2017-09-28 15:23:23 (GMT)
</literallayout>
The description file can include multiple patch statements where
each statement handles a single patch.
In the example <filename>build.scc</filename> file, five patch
statements exist for the five patches in the directory.
</para>
<para>
You can create a typical <filename>.patch</filename> file using
<filename>diff -Nurp</filename> or
<filename>git format-patch</filename> commands.
For information on how to create patches, see the
"<link linkend='using-devtool-to-patch-the-kernel'>Using <filename>devtool</filename> to Patch the Kernel</link>"
and
"<link linkend='using-traditional-kernel-development-to-patch-the-kernel'>Using Traditional Kernel Development to Patch the Kernel</link>"
sections.
</para>
</section>
<section id='features'>
<title>Features</title>
<para>
Features are complex kernel Metadata types that consist
of configuration fragments, patches, and possibly other feature
description files.
As an example, consider the following generic listing:
<literallayout class='monospaced'>
features/<replaceable>myfeature</replaceable>.scc
define KFEATURE_DESCRIPTION "Enable <replaceable>myfeature</replaceable>"
patch 0001-<replaceable>myfeature</replaceable>-core.patch
patch 0002-<replaceable>myfeature</replaceable>-interface.patch
include cfg/<replaceable>myfeature</replaceable>_dependency.scc
kconf non-hardware <replaceable>myfeature</replaceable>.cfg
</literallayout>
This example shows how the <filename>patch</filename> and
<filename>kconf</filename> commands are used as well as
how an additional feature description file is included with
the <filename>include</filename> command.
</para>
<para>
Typically, features are less granular than configuration
fragments and are more likely than configuration fragments
and patches to be the types of things you want to specify
in the <filename>KERNEL_FEATURES</filename> variable of the
Linux kernel recipe.
See the "<link linkend='using-kernel-metadata-in-a-recipe'>Using Kernel Metadata in a Recipe</link>"
section earlier in the manual.
</para>
</section>
<section id='kernel-types'>
<title>Kernel Types</title>
<para>
A kernel type defines a high-level kernel policy by
aggregating non-hardware configuration fragments with
patches you want to use when building a Linux kernel of a
specific type (e.g. a real-time kernel).
Syntactically, kernel types are no different than features
as described in the "<link linkend='features'>Features</link>"
section.
The
<ulink url='&YOCTO_DOCS_REF_URL;#var-LINUX_KERNEL_TYPE'><filename>LINUX_KERNEL_TYPE</filename></ulink>
variable in the kernel recipe selects the kernel type.
For example, in the <filename>linux-yocto_4.12.bb</filename>
kernel recipe found in
<filename>poky/meta/recipes-kernel/linux</filename>, a
<ulink url='&YOCTO_DOCS_BB_URL;#require-inclusion'><filename>require</filename></ulink>
directive includes the
<filename>poky/meta/recipes-kernel/linux/linux-yocto.inc</filename>
file, which has the following statement that defines the default
kernel type:
<literallayout class='monospaced'>
LINUX_KERNEL_TYPE ??= "standard"
</literallayout>
</para>
<para>
Another example would be the real-time kernel (i.e.
<filename>linux-yocto-rt_4.12.bb</filename>).
This kernel recipe directly sets the kernel type as follows:
<literallayout class='monospaced'>
LINUX_KERNEL_TYPE = "preempt-rt"
</literallayout>
<note>
You can find kernel recipes in the
<filename>meta/recipes-kernel/linux</filename> directory of the
<ulink url='&YOCTO_DOCS_REF_URL;#source-directory'>Source Directory</ulink>
(e.g. <filename>poky/meta/recipes-kernel/linux/linux-yocto_4.12.bb</filename>).
See the "<link linkend='using-kernel-metadata-in-a-recipe'>Using Kernel Metadata in a Recipe</link>"
section for more information.
</note>
</para>
<para>
Three kernel types ("standard", "tiny", and "preempt-rt") are
supported for Linux Yocto kernels:
<itemizedlist>
<listitem><para>"standard":
Includes the generic Linux kernel policy of the Yocto
Project linux-yocto kernel recipes.
This policy includes, among other things, which file
systems, networking options, core kernel features, and
debugging and tracing options are supported.
</para></listitem>
<listitem><para>"preempt-rt":
Applies the <filename>PREEMPT_RT</filename>
patches and the configuration options required to
build a real-time Linux kernel.
This kernel type inherits from the "standard" kernel type.
</para></listitem>
<listitem><para>"tiny":
Defines a bare minimum configuration meant to serve as a
base for very small Linux kernels.
The "tiny" kernel type is independent from the "standard"
configuration.
Although the "tiny" kernel type does not currently include
any source changes, it might in the future.
</para></listitem>
</itemizedlist>
</para>
<para>
For any given kernel type, the Metadata is defined by the
<filename>.scc</filename> (e.g. <filename>standard.scc</filename>).
Here is a partial listing for the <filename>standard.scc</filename>
file, which is found in the <filename>ktypes/standard</filename>
directory of the <filename>yocto-kernel-cache</filename> Git
repository:
<literallayout class='monospaced'>
# Include this kernel type fragment to get the standard features and
# configuration values.
# Note: if only the features are desired, but not the configuration
# then this should be included as:
# include ktypes/standard/standard.scc nocfg
# if no chained configuration is desired, include it as:
# include ktypes/standard/standard.scc nocfg inherit
include ktypes/base/base.scc
branch standard
kconf non-hardware standard.cfg
include features/kgdb/kgdb.scc
.
.
.
include cfg/net/ip6_nf.scc
include cfg/net/bridge.scc
include cfg/systemd.scc
include features/rfkill/rfkill.scc
</literallayout>
</para>
<para>
As with any <filename>.scc</filename> file, a
kernel type definition can aggregate other
<filename>.scc</filename> files with
<filename>include</filename> commands.
These definitions can also directly pull in
configuration fragments and patches with the
<filename>kconf</filename> and <filename>patch</filename>
commands, respectively.
</para>
<note>
It is not strictly necessary to create a kernel type
<filename>.scc</filename> file.
The Board Support Package (BSP) file can implicitly define
the kernel type using a <filename>define
<ulink url='&YOCTO_DOCS_REF_URL;#var-KTYPE'>KTYPE</ulink> myktype</filename>
line.
See the "<link linkend='bsp-descriptions'>BSP Descriptions</link>"
section for more information.
</note>
</section>
<section id='bsp-descriptions'>
<title>BSP Descriptions</title>
<para>
BSP descriptions (i.e. <filename>*.scc</filename> files)
combine kernel types with hardware-specific features.
The hardware-specific Metadata is typically defined
independently in the BSP layer, and then aggregated with each
supported kernel type.
<note>
For BSPs supported by the Yocto Project, the BSP description
files are located in the <filename>bsp</filename> directory
of the
<ulink url='&YOCTO_GIT_URL;/cgit/cgit.cgi/yocto-kernel-cache/tree/bsp'><filename>yocto-kernel-cache</filename></ulink>
repository organized under the "Yocto Linux Kernel" heading
in the
<ulink url='http://git.yoctoproject.org/cgit/cgit.cgi'>Yocto Project Source Repositories</ulink>.
</note>
</para>
<para>
This section overviews the BSP description structure, the
aggregation concepts, and presents a detailed example using
a BSP supported by the Yocto Project (i.e. BeagleBone Board).
For complete information on BSP layer file hierarchy, see the
<ulink url='&YOCTO_DOCS_BSP_URL;'>Yocto Project Board Support Package (BSP) Developer's Guide</ulink>.
</para>
<section id='bsp-description-file-overview'>
<title>Overview</title>
<para>
For simplicity, consider the following root BSP layer
description files for the BeagleBone board.
These files employ both a structure and naming convention
for consistency.
The naming convention for the file is as follows:
<literallayout class='monospaced'>
<replaceable>bsp_root_name</replaceable>-<replaceable>kernel_type</replaceable>.scc
</literallayout>
Here are some example root layer BSP filenames for the
BeagleBone Board BSP, which is supported by the Yocto Project:
<literallayout class='monospaced'>
beaglebone-standard.scc
beaglebone-preempt-rt.scc
</literallayout>
Each file uses the root name (i.e "beaglebone") BSP name
followed by the kernel type.
</para>
<para>
Examine the <filename>beaglebone-standard.scc</filename>
file:
<literallayout class='monospaced'>
define KMACHINE beaglebone
define KTYPE standard
define KARCH arm
include ktypes/standard/standard.scc
branch beaglebone
include beaglebone.scc
# default policy for standard kernels
include features/latencytop/latencytop.scc
include features/profiling/profiling.scc
</literallayout>
Every top-level BSP description file should define the
<ulink url='&YOCTO_DOCS_REF_URL;#var-KMACHINE'><filename>KMACHINE</filename></ulink>,
<ulink url='&YOCTO_DOCS_REF_URL;#var-KTYPE'><filename>KTYPE</filename></ulink>,
and <ulink url='&YOCTO_DOCS_REF_URL;#var-KARCH'><filename>KARCH</filename></ulink>
variables.
These variables allow the OpenEmbedded build system to identify
the description as meeting the criteria set by the recipe being
built.
This example supports the "beaglebone" machine for the
"standard" kernel and the "arm" architecture.
</para>
<para>
Be aware that a hard link between the
<filename>KTYPE</filename> variable and a kernel type
description file does not exist.
Thus, if you do not have the kernel type defined in your kernel
Metadata as it is here, you only need to ensure that the
<ulink url='&YOCTO_DOCS_REF_URL;#var-LINUX_KERNEL_TYPE'><filename>LINUX_KERNEL_TYPE</filename></ulink>
variable in the kernel recipe and the
<filename>KTYPE</filename> variable in the BSP description
file match.
</para>
<para>
To separate your kernel policy from your hardware configuration,
you include a kernel type (<filename>ktype</filename>), such as
"standard".
In the previous example, this is done using the following:
<literallayout class='monospaced'>
include ktypes/standard/standard.scc
</literallayout>
This file aggregates all the configuration fragments, patches,
and features that make up your standard kernel policy.
See the "<link linkend='kernel-types'>Kernel Types</link>"
section for more information.
</para>
<para>
To aggregate common configurations and features specific to the
kernel for <replaceable>mybsp</replaceable>, use the following:
<literallayout class='monospaced'>
include <replaceable>mybsp</replaceable>.scc
</literallayout>
You can see that in the BeagleBone example with the following:
<literallayout class='monospaced'>
include beaglebone.scc
</literallayout>
For information on how to break a complete
<filename>.config</filename> file into the various
configuration fragments, see the
"<link linkend='creating-config-fragments'>Creating Configuration Fragments</link>"
section.
</para>
<para>
Finally, if you have any configurations specific to the
hardware that are not in a <filename>*.scc</filename> file,
you can include them as follows:
<literallayout class='monospaced'>
kconf hardware <replaceable>mybsp</replaceable>-<replaceable>extra</replaceable>.cfg
</literallayout>
The BeagleBone example does not include these types of
configurations.
However, the Malta 32-bit board does ("mti-malta32").
Here is the <filename>mti-malta32-le-standard.scc</filename>
file:
<literallayout class='monospaced'>
define KMACHINE mti-malta32-le
define KMACHINE qemumipsel
define KTYPE standard
define KARCH mips
include ktypes/standard/standard.scc
branch mti-malta32
include mti-malta32.scc
kconf hardware mti-malta32-le.cfg
</literallayout>
</para>
</section>
<section id='bsp-description-file-example-minnow'>
<title>Example</title>
<para>
Many real-world examples are more complex.
Like any other <filename>.scc</filename> file, BSP
descriptions can aggregate features.
Consider the Minnow BSP definition given the
<filename>linux-yocto-4.4</filename> branch of the
<filename>yocto-kernel-cache</filename> (i.e.
<filename>yocto-kernel-cache/bsp/minnow/minnow.scc</filename>):
<note>
Although the Minnow Board BSP is unused, the Metadata
remains and is being used here just as an example.
</note>
<literallayout class='monospaced'>
include cfg/x86.scc
include features/eg20t/eg20t.scc
include cfg/dmaengine.scc
include features/power/intel.scc
include cfg/efi.scc
include features/usb/ehci-hcd.scc
include features/usb/ohci-hcd.scc
include features/usb/usb-gadgets.scc
include features/usb/touchscreen-composite.scc
include cfg/timer/hpet.scc
include features/leds/leds.scc
include features/spi/spidev.scc
include features/i2c/i2cdev.scc
include features/mei/mei-txe.scc
# Earlyprintk and port debug requires 8250
kconf hardware cfg/8250.cfg
kconf hardware minnow.cfg
kconf hardware minnow-dev.cfg
</literallayout>
</para>
<para>
The <filename>minnow.scc</filename> description file includes
a hardware configuration fragment
(<filename>minnow.cfg</filename>) specific to the Minnow
BSP as well as several more general configuration
fragments and features enabling hardware found on the
machine.
This <filename>minnow.scc</filename> description file is then
included in each of the three
"minnow" description files for the supported kernel types
(i.e. "standard", "preempt-rt", and "tiny").
Consider the "minnow" description for the "standard" kernel
type (i.e. <filename>minnow-standard.scc</filename>:
<literallayout class='monospaced'>
define KMACHINE minnow
define KTYPE standard
define KARCH i386
include ktypes/standard
include minnow.scc
# Extra minnow configs above the minimal defined in minnow.scc
include cfg/efi-ext.scc
include features/media/media-all.scc
include features/sound/snd_hda_intel.scc
# The following should really be in standard.scc
# USB live-image support
include cfg/usb-mass-storage.scc
include cfg/boot-live.scc
# Basic profiling
include features/latencytop/latencytop.scc
include features/profiling/profiling.scc
# Requested drivers that don't have an existing scc
kconf hardware minnow-drivers-extra.cfg
</literallayout>
The <filename>include</filename> command midway through the file
includes the <filename>minnow.scc</filename> description that
defines all enabled hardware for the BSP that is common to
all kernel types.
Using this command significantly reduces duplication.
</para>
<para>
Now consider the "minnow" description for the "tiny" kernel
type (i.e. <filename>minnow-tiny.scc</filename>):
<literallayout class='monospaced'>
define KMACHINE minnow
define KTYPE tiny
define KARCH i386
include ktypes/tiny
include minnow.scc
</literallayout>
As you might expect, the "tiny" description includes quite a
bit less.
In fact, it includes only the minimal policy defined by the
"tiny" kernel type and the hardware-specific configuration
required for booting the machine along with the most basic
functionality of the system as defined in the base "minnow"
description file.
</para>
<para>
Notice again the three critical variables:
<ulink url='&YOCTO_DOCS_REF_URL;#var-KMACHINE'><filename>KMACHINE</filename></ulink>,
<ulink url='&YOCTO_DOCS_REF_URL;#var-KTYPE'><filename>KTYPE</filename></ulink>,
and
<ulink url='&YOCTO_DOCS_REF_URL;#var-KARCH'><filename>KARCH</filename></ulink>.
Of these variables, only <filename>KTYPE</filename>
has changed to specify the "tiny" kernel type.
</para>
</section>
</section>
</section>
<section id='kernel-metadata-location'>
<title>Kernel Metadata Location</title>
<para>
Kernel Metadata always exists outside of the kernel tree either
defined in a kernel recipe (recipe-space) or outside of the recipe.
Where you choose to define the Metadata depends on what you want
to do and how you intend to work.
Regardless of where you define the kernel Metadata, the syntax used
applies equally.
</para>
<para>
If you are unfamiliar with the Linux kernel and only wish
to apply a configuration and possibly a couple of patches provided to
you by others, the recipe-space method is recommended.
This method is also a good approach if you are working with Linux kernel
sources you do not control or if you just do not want to maintain a
Linux kernel Git repository on your own.
For partial information on how you can define kernel Metadata in
the recipe-space, see the
"<link linkend='modifying-an-existing-recipe'>Modifying an Existing Recipe</link>"
section.
</para>
<para>
Conversely, if you are actively developing a kernel and are already
maintaining a Linux kernel Git repository of your own, you might find
it more convenient to work with kernel Metadata kept outside the
recipe-space.
Working with Metadata in this area can make iterative development of
the Linux kernel more efficient outside of the BitBake environment.
</para>
<section id='recipe-space-metadata'>
<title>Recipe-Space Metadata</title>
<para>
When stored in recipe-space, the kernel Metadata files reside in a
directory hierarchy below
<ulink url='&YOCTO_DOCS_REF_URL;#var-FILESEXTRAPATHS'><filename>FILESEXTRAPATHS</filename></ulink>.
For a linux-yocto recipe or for a Linux kernel recipe derived
by copying and modifying
<filename>oe-core/meta-skeleton/recipes-kernel/linux/linux-yocto-custom.bb</filename>
to a recipe in your layer, <filename>FILESEXTRAPATHS</filename>
is typically set to
<filename>${</filename><ulink url='&YOCTO_DOCS_REF_URL;#var-THISDIR'><filename>THISDIR</filename></ulink><filename>}/${</filename><ulink url='&YOCTO_DOCS_REF_URL;#var-PN'><filename>PN</filename></ulink><filename>}</filename>.
See the "<link linkend='modifying-an-existing-recipe'>Modifying an Existing Recipe</link>"
section for more information.
</para>
<para>
Here is an example that shows a trivial tree of kernel Metadata
stored in recipe-space within a BSP layer:
<literallayout class='monospaced'>
meta-<replaceable>my_bsp_layer</replaceable>/
`-- recipes-kernel
`-- linux
`-- linux-yocto
|-- bsp-standard.scc
|-- bsp.cfg
`-- standard.cfg
</literallayout>
</para>
<para>
When the Metadata is stored in recipe-space, you must take
steps to ensure BitBake has the necessary information to decide
what files to fetch and when they need to be fetched again.
It is only necessary to specify the <filename>.scc</filename>
files on the
<ulink url='&YOCTO_DOCS_REF_URL;#var-SRC_URI'><filename>SRC_URI</filename></ulink>.
BitBake parses them and fetches any files referenced in the
<filename>.scc</filename> files by the <filename>include</filename>,
<filename>patch</filename>, or <filename>kconf</filename> commands.
Because of this, it is necessary to bump the recipe
<ulink url='&YOCTO_DOCS_REF_URL;#var-PR'><filename>PR</filename></ulink>
value when changing the content of files not explicitly listed
in the <filename>SRC_URI</filename>.
</para>
<para>
If the BSP description is in recipe space, you cannot simply list
the <filename>*.scc</filename> in the <filename>SRC_URI</filename>
statement.
You need to use the following form from your kernel append file:
<literallayout class='monospaced'>
SRC_URI_append_<replaceable>myplatform</replaceable> = " \
file://<replaceable>myplatform</replaceable>;type=kmeta;destsuffix=<replaceable>myplatform</replaceable> \
"
</literallayout>
</para>
</section>
<section id='metadata-outside-the-recipe-space'>
<title>Metadata Outside the Recipe-Space</title>
<para>
When stored outside of the recipe-space, the kernel Metadata
files reside in a separate repository.
The OpenEmbedded build system adds the Metadata to the build as
a "type=kmeta" repository through the
<ulink url='&YOCTO_DOCS_REF_URL;#var-SRC_URI'><filename>SRC_URI</filename></ulink>
variable.
As an example, consider the following <filename>SRC_URI</filename>
statement from the <filename>linux-yocto_4.12.bb</filename>
kernel recipe:
<literallayout class='monospaced'>
SRC_URI = "git://git.yoctoproject.org/linux-yocto-4.12.git;name=machine;branch=${KBRANCH}; \
git://git.yoctoproject.org/yocto-kernel-cache;type=kmeta;name=meta;branch=yocto-4.12;destsuffix=${KMETA}"
</literallayout>
<filename>${KMETA}</filename>, in this context, is simply used to
name the directory into which the Git fetcher places the Metadata.
This behavior is no different than any multi-repository
<filename>SRC_URI</filename> statement used in a recipe (e.g.
see the previous section).
</para>
<para>
You can keep kernel Metadata in a "kernel-cache", which is a
directory containing configuration fragments.
As with any Metadata kept outside the recipe-space, you simply
need to use the <filename>SRC_URI</filename> statement with the
"type=kmeta" attribute.
Doing so makes the kernel Metadata available during the
configuration phase.
</para>
<para>
If you modify the Metadata, you must not forget to update the
<filename>SRCREV</filename> statements in the kernel's recipe.
In particular, you need to update the
<filename>SRCREV_meta</filename> variable to match the commit in
the <filename>KMETA</filename> branch you wish to use.
Changing the data in these branches and not updating the
<filename>SRCREV</filename> statements to match will cause the
build to fetch an older commit.
</para>
</section>
</section>
<section id='organizing-your-source'>
<title>Organizing Your Source</title>
<para>
Many recipes based on the <filename>linux-yocto-custom.bb</filename>
recipe use Linux kernel sources that have only a single
branch - "master".
This type of repository structure is fine for linear development
supporting a single machine and architecture.
However, if you work with multiple boards and architectures,
a kernel source repository with multiple branches is more
efficient.
For example, suppose you need a series of patches for one board to boot.
Sometimes, these patches are works-in-progress or fundamentally wrong,
yet they are still necessary for specific boards.
In these situations, you most likely do not want to include these
patches in every kernel you build (i.e. have the patches as part of
the lone "master" branch).
It is situations like these that give rise to multiple branches used
within a Linux kernel sources Git repository.
</para>
<para>
Repository organization strategies exist that maximize source reuse,
remove redundancy, and logically order your changes.
This section presents strategies for the following cases:
<itemizedlist>
<listitem><para>Encapsulating patches in a feature description
and only including the patches in the BSP descriptions of
the applicable boards.</para></listitem>
<listitem><para>Creating a machine branch in your
kernel source repository and applying the patches on that
branch only.</para></listitem>
<listitem><para>Creating a feature branch in your
kernel source repository and merging that branch into your
BSP when needed.</para></listitem>
</itemizedlist>
</para>
<para>
The approach you take is entirely up to you
and depends on what works best for your development model.
</para>
<section id='encapsulating-patches'>
<title>Encapsulating Patches</title>
<para>
if you are reusing patches from an external tree and are not
working on the patches, you might find the encapsulated feature
to be appropriate.
Given this scenario, you do not need to create any branches in the
source repository.
Rather, you just take the static patches you need and encapsulate
them within a feature description.
Once you have the feature description, you simply include that into
the BSP description as described in the
"<link linkend='bsp-descriptions'>BSP Descriptions</link>"
section.
</para>
<para>
You can find information on how to create patches and BSP
descriptions in the "<link linkend='patches'>Patches</link>" and
"<link linkend='bsp-descriptions'>BSP Descriptions</link>"
sections.
</para>
</section>
<section id='machine-branches'>
<title>Machine Branches</title>
<para>
When you have multiple machines and architectures to support,
or you are actively working on board support, it is more
efficient to create branches in the repository based on
individual machines.
Having machine branches allows common source to remain in the
"master" branch with any features specific to a machine stored
in the appropriate machine branch.
This organization method frees you from continually reintegrating
your patches into a feature.
</para>
<para>
Once you have a new branch, you can set up your kernel Metadata
to use the branch a couple different ways.
In the recipe, you can specify the new branch as the
<filename>KBRANCH</filename> to use for the board as
follows:
<literallayout class='monospaced'>
KBRANCH = "mynewbranch"
</literallayout>
Another method is to use the <filename>branch</filename> command
in the BSP description:
<literallayout class='monospaced'>
mybsp.scc:
define KMACHINE mybsp
define KTYPE standard
define KARCH i386
include standard.scc
branch mynewbranch
include mybsp-hw.scc
</literallayout>
</para>
<para>
If you find yourself with numerous branches, you might consider
using a hierarchical branching system similar to what the
Yocto Linux Kernel Git repositories use:
<literallayout class='monospaced'>
<replaceable>common</replaceable>/<replaceable>kernel_type</replaceable>/<replaceable>machine</replaceable>
</literallayout>
</para>
<para>
If you had two kernel types, "standard" and "small" for
instance, three machines, and <replaceable>common</replaceable>
as <filename>mydir</filename>, the branches in your
Git repository might look like this:
<literallayout class='monospaced'>
mydir/base
mydir/standard/base
mydir/standard/machine_a
mydir/standard/machine_b
mydir/standard/machine_c
mydir/small/base
mydir/small/machine_a
</literallayout>
</para>
<para>
This organization can help clarify the branch relationships.
In this case, <filename>mydir/standard/machine_a</filename>
includes everything in <filename>mydir/base</filename> and
<filename>mydir/standard/base</filename>.
The "standard" and "small" branches add sources specific to those
kernel types that for whatever reason are not appropriate for the
other branches.
<note>
The "base" branches are an artifact of the way Git manages
its data internally on the filesystem: Git will not allow you
to use <filename>mydir/standard</filename> and
<filename>mydir/standard/machine_a</filename> because it
would have to create a file and a directory named "standard".
</note>
</para>
</section>
<section id='feature-branches'>
<title>Feature Branches</title>
<para>
When you are actively developing new features, it can be more
efficient to work with that feature as a branch, rather than
as a set of patches that have to be regularly updated.
The Yocto Project Linux kernel tools provide for this with
the <filename>git merge</filename> command.
</para>
<para>
To merge a feature branch into a BSP, insert the
<filename>git merge</filename> command after any
<filename>branch</filename> commands:
<literallayout class='monospaced'>
mybsp.scc:
define KMACHINE mybsp
define KTYPE standard
define KARCH i386
include standard.scc
branch mynewbranch
git merge myfeature
include mybsp-hw.scc
</literallayout>
</para>
</section>
</section>
<section id='scc-reference'>
<title>SCC Description File Reference</title>
<para>
This section provides a brief reference for the commands you can use
within an SCC description file (<filename>.scc</filename>):
<itemizedlist>
<listitem><para>
<filename>branch [ref]</filename>:
Creates a new branch relative to the current branch
(typically <filename>${KTYPE}</filename>) using
the currently checked-out branch, or "ref" if specified.
</para></listitem>
<listitem><para>
<filename>define</filename>:
Defines variables, such as
<ulink url='&YOCTO_DOCS_REF_URL;#var-KMACHINE'><filename>KMACHINE</filename></ulink>,
<ulink url='&YOCTO_DOCS_REF_URL;#var-KTYPE'><filename>KTYPE</filename></ulink>,
<ulink url='&YOCTO_DOCS_REF_URL;#var-KARCH'><filename>KARCH</filename></ulink>,
and
<ulink url='&YOCTO_DOCS_REF_URL;#var-KFEATURE_DESCRIPTION'><filename>KFEATURE_DESCRIPTION</filename></ulink>.
</para></listitem>
<listitem><para>
<filename>include SCC_FILE</filename>:
Includes an SCC file in the current file.
The file is parsed as if you had inserted it inline.
</para></listitem>
<listitem><para>
<filename>kconf [hardware|non-hardware] CFG_FILE</filename>:
Queues a configuration fragment for merging into the final
Linux <filename>.config</filename> file.</para></listitem>
<listitem><para>
<filename>git merge GIT_BRANCH</filename>:
Merges the feature branch into the current branch.
</para></listitem>
<listitem><para>
<filename>patch PATCH_FILE</filename>:
Applies the patch to the current Git branch.
</para></listitem>
</itemizedlist>
</para>
</section>
</chapter>
<!--
vim: expandtab tw=80 ts=4
-->