blob: 903028f5cf58f01f2834a1a71bafe9d2502bf787 [file] [log] [blame]
<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"
[<!ENTITY % poky SYSTEM "../poky.ent"> %poky; ] >
<chapter id='dev-manual-qemu'>
<title>Using the Quick EMUlator (QEMU)</title>
<para>
Quick EMUlator (QEMU) is an Open Source project the Yocto Project uses
as part of its development "tool set".
As such, the information in this chapter is limited to the
Yocto Project integration of QEMU and not QEMU in general.
For official information and documentation on QEMU, see the
following references:
<itemizedlist>
<listitem><para><emphasis><ulink url='http://wiki.qemu.org/Main_Page'>QEMU Website</ulink>:</emphasis>
The official website for the QEMU Open Source project.
</para></listitem>
<listitem><para><emphasis><ulink url='http://wiki.qemu.org/Manual'>Documentation</ulink>:</emphasis>
The QEMU user manual.
</para></listitem>
</itemizedlist>
</para>
<para>
This chapter provides an overview of the Yocto Project's integration of
QEMU, a description of how you use QEMU and its various options, running
under a Network File System (NFS) server, and a few tips and tricks you
might find helpful when using QEMU.
</para>
<section id='qemu-overview'>
<title>Overview</title>
<para>
Within the context of the Yocto Project, QEMU is an
emulator and virtualization machine that allows you to run a complete
image you have built using the Yocto Project as just another task
on your build system.
QEMU is useful for running and testing images and applications on
supported Yocto Project architectures without having actual hardware.
Among other things, the Yocto Project uses QEMU to run automated
Quality Assurance (QA) tests on final images shipped with each
release.
</para>
<para>
QEMU is made available with the Yocto Project a number of ways.
The easiest and recommended method for getting QEMU is to run the
ADT installer. For more information on how to make sure you have
QEMU available, see the
"<ulink url='&YOCTO_DOCS_ADT_URL;#the-qemu-emulator'>The QEMU Emulator</ulink>"
section in the Yocto Project Application Developer's Guide.
</para>
</section>
<section id='qemu-running-qemu'>
<title>Running QEMU</title>
<para>
Running QEMU involves having your build environment set up, having the
right artifacts available, and understanding how to use the many
options that are available to you when you start QEMU using the
<filename>runqemu</filename> command.
</para>
<section id='qemu-setting-up-the-environment'>
<title>Setting Up the Environment</title>
<para>
You run QEMU in the same environment from which you run BitBake.
This means you need to source a build environment script (i.e.
<ulink url='&YOCTO_DOCS_REF_URL;#structure-core-script'><filename>&OE_INIT_FILE;</filename></ulink>
or
<ulink url='&YOCTO_DOCS_REF_URL;#structure-memres-core-script'><filename>oe-init-build-env-memres</filename></ulink>).
</para>
</section>
<section id='qemu-using-the-runqemu-command'>
<title>Using the <filename>runqemu</filename> Command</title>
<para>
The basic <filename>runqemu</filename> command syntax is as
follows:
<literallayout class='monospaced'>
$ runqemu [<replaceable>option</replaceable> ] [...]
</literallayout>
Based on what you provide on the command line,
<filename>runqemu</filename> does a good job of figuring out what
you are trying to do.
For example, by default, QEMU looks for the most recently built
image according to the timestamp when it needs to look for an
image.
Minimally, through the use of options, you must provide either
a machine name, a virtual machine image
(<filename>*.vmdk</filename>), or a kernel image
(<filename>*.bin</filename>).
</para>
<para>
Following is a description of <filename>runqemu</filename>
options you can provide on the command line:
<note><title>Tip</title>
If you do provide some "illegal" option combination or perhaps
you do not provide enough in the way of options,
<filename>runqemu</filename> provides appropriate error
messaging to help you correct the problem.
</note>
<itemizedlist>
<listitem><para><replaceable>QEMUARCH</replaceable>:
The QEMU machine architecture, which must be "qemux86",
"qemux86_64", "qemuarm", "qemumips", "qemumipsel",
“qemumips64", "qemush4", "qemuppc", "qemumicroblaze",
or "qemuzynq".
</para></listitem>
<listitem><para><filename><replaceable>VM</replaceable></filename>:
The virtual machine image, which must be a
<filename>.vmdk</filename> file.
Use this option when you want to boot a
<filename>.vmdk</filename> image.
The image filename you provide must contain one of the
following strings: "qemux86-64", "qemux86", "qemuarm",
"qemumips64", "qemumips", "qemuppc", or "qemush4".
</para></listitem>
<listitem><para><replaceable>ROOTFS</replaceable>:
A root filesystem that has one of the following
filetype extensions: "ext2", "ext3", "ext4", "jffs2",
"nfs", or "btrfs".
If the filename you provide for this option uses “nfs”, it
must provide an explicit root filesystem path.
</para></listitem>
<listitem><para><replaceable>KERNEL</replaceable>:
A kernel image, which is a <filename>.bin</filename> file.
When you provide a <filename>.bin</filename> file,
<filename>runqemu</filename> detects it and assumes the
file is a kernel image.
</para></listitem>
<listitem><para><replaceable>MACHINE</replaceable>:
The architecture of the QEMU machine, which must be one
of the following: "qemux86",
"qemux86-64", "qemuarm", "qemumips", "qemumipsel",
“qemumips64", "qemush4", "qemuppc", "qemumicroblaze",
or "qemuzynq".
The <replaceable>MACHINE</replaceable> and
<replaceable>QEMUARCH</replaceable> options are basically
identical.
If you do not provide a <replaceable>MACHINE</replaceable>
option, <filename>runqemu</filename> tries to determine
it based on other options.
</para></listitem>
<listitem><para><filename>ramfs</filename>:
Indicates you are booting an initial RAM disk (initramfs)
image, which means the <filename>FSTYPE</filename> is
<filename>cpio.gz</filename>.
</para></listitem>
<listitem><para><filename>iso</filename>:
Indicates you are booting an ISO image, which means the
<filename>FSTYPE</filename> is
<filename>.iso</filename>.
</para></listitem>
<listitem><para><filename>nographic</filename>:
Disables the video console, which sets the console to
"ttys0".
</para></listitem>
<listitem><para><filename>serial</filename>:
Enables a serial console on
<filename>/dev/ttyS0</filename>.
</para></listitem>
<listitem><para><filename>biosdir</filename>:
Establishes a custom directory for BIOS, VGA BIOS and
keymaps.
</para></listitem>
<listitem><para><filename>biosfilename</filename>:
Establishes a custom BIOS name.
</para></listitem>
<listitem><para><filename>qemuparams=\"<replaceable>xyz</replaceable>\"</filename>:
Specifies custom QEMU parameters.
Use this option to pass options other than the simple
"kvm" and "serial" options.
</para></listitem>
<listitem><para><filename>bootparams=\"<replaceable>xyz</replaceable>\"</filename>:
Specifies custom boot parameters for the kernel.
</para></listitem>
<listitem><para><filename>audio</filename>:
Enables audio in QEMU.
The <replaceable>MACHINE</replaceable> option must be
either "qemux86" or "qemux86-64" in order for audio to be
enabled.
Additionally, the <filename>snd_intel8x0</filename>
or <filename>snd_ens1370</filename> driver must be
installed in linux guest.
</para></listitem>
<listitem><para><filename>slirp</filename>:
Enables "slirp" networking, which is a different way
of networking that does not need root access
but also is not as easy to use or comprehensive
as the default.
</para></listitem>
<listitem><para id='kvm-cond'><filename>kvm</filename>:
Enables KVM when running "qemux86" or "qemux86-64"
QEMU architectures.
For KVM to work, all the following conditions must be met:
<itemizedlist>
<listitem><para>
Your <replaceable>MACHINE</replaceable> must be either
qemux86" or "qemux86-64".
</para></listitem>
<listitem><para>
Your build host has to have the KVM modules
installed, which are
<filename>/dev/kvm</filename>.
</para></listitem>
<listitem><para>
The build host <filename>/dev/kvm</filename>
directory has to be both writable and readable.
</para></listitem>
</itemizedlist>
</para></listitem>
<listitem><para><filename>kvm-vhost</filename>:
Enables KVM with VHOST support when running "qemux86" or "qemux86-64"
QEMU architectures.
For KVM with VHOST to work, the following conditions must
be met:
<itemizedlist>
<listitem><para>
<link linkend='kvm-cond'>kvm</link> option
conditions must be met.
</para></listitem>
<listitem><para>
Your build host has to have virtio net device, which
are <filename>/dev/vhost-net</filename>.
</para></listitem>
<listitem><para>
The build host <filename>/dev/vhost-net</filename>
directory has to be either readable or writable
and “slirp-enabled”.
</para></listitem>
</itemizedlist>
</para></listitem>
<listitem><para><filename>publicvnc</filename>:
Enables a VNC server open to all hosts.
</para></listitem>
</itemizedlist>
</para>
<para>
For further understanding regarding option use with
<filename>runqemu</filename>, consider some examples.
</para>
<para>
This example starts QEMU with
<replaceable>MACHINE</replaceable> set to "qemux86".
Assuming a standard
<link linkend='build-directory'>Build Directory</link>,
<filename>runqemu</filename> automatically finds the
<filename>bzImage-qemux86.bin</filename> image file and
the
<filename>core-image-minimal-qemux86-20140707074611.rootfs.ext3</filename>
(assuming the current build created a
<filename>core-image-minimal</filename> image).
<note>
When more than one image with the same name exists, QEMU finds
and uses the most recently built image according to the
timestamp.
</note>
<literallayout class='monospaced'>
$ runqemu qemux86
</literallayout>
This example produces the exact same results as the
previous example.
This command, however, specifically provides the image
and root filesystem type.
<literallayout class='monospaced'>
$ runqemu qemux86 core-image-minimal ext3
</literallayout>
This example specifies to boot an initial RAM disk image
and to enable audio in QEMU.
For this case, <filename>runqemu</filename> set the
internal variable <filename>FSTYPE</filename> to
"cpio.gz".
Also, for audio to be enabled, an appropriate driver must
be installed (see the previous description for the
<filename>audio</filename> option for more information).
<literallayout class='monospaced'>
$ runqemu qemux86 ramfs audio
</literallayout>
This example does not provide enough information for
QEMU to launch.
While the command does provide a root filesystem type, it
must also minimally provide a
<replaceable>MACHINE</replaceable>,
<replaceable>KERNEL</replaceable>, or
<replaceable>VM</replaceable> option.
<literallayout class='monospaced'>
$ runqemu ext3
</literallayout>
This example specifies to boot a virtual machine image
(<filename>.vmdk</filename> file).
From the <filename>.vmdk</filename>,
<filename>runqemu</filename> determines the QEMU
architecture (<replaceable>MACHINE</replaceable>) to be
"qemux86" and the root filesystem type to be "vmdk".
<literallayout class='monospaced'>
$ runqemu /home/scott-lenovo/vm/core-image-minimal-qemux86.vmdk
</literallayout>
</para>
</section>
</section>
<section id='qemu-running-under-a-network-file-system-nfs-server'>
<title>Running Under a Network File System (NFS) Server</title>
<para>
One method for running QEMU is to run it on an NFS server.
This is useful when you need to access the same file system from both
the build and the emulated system at the same time.
It is also worth noting that the system does not need root privileges
to run.
It uses a user space NFS server to avoid that.
This section describes how to set up for running QEMU using an NFS
server and then how you can start and stop the server.
</para>
<section id='qemu-setting-up-to-use-nfs'>
<title>Setting Up to Use NFS</title>
<para>
Once you are able to run QEMU in your environment, you can use the
<filename>runqemu-extract-sdk</filename> script, which is located
in the <filename>scripts</filename> directory along with
<filename>runqemu</filename> script.
The <filename>runqemu-extract-sdk</filename> takes a root
file system tarball and extracts it into a location that you
specify.
Then, when you run <filename>runqemu</filename>, you can specify
the location that has the file system to pass it to QEMU.
Here is an example that takes a file system and extracts it to
a directory named <filename>test-nfs</filename>:
<literallayout class='monospaced'>
runqemu-extract-sdk ./tmp/deploy/images/qemux86/core-image-sato-qemux86.tar.bz2 test-nfs
</literallayout>
Once you have extracted the file system, you can run
<filename>runqemu</filename> normally with the additional
location of the file system.
You can then also make changes to the files within
<filename>./test-nfs</filename> and see those changes appear in the
image in real time.
Here is an example using the <filename>qemux86</filename> image:
<literallayout class='monospaced'>
runqemu qemux86 ./test-nfs
</literallayout>
</para>
</section>
<section id='qemu-starting-and-stopping-nfs'>
<title>Starting and Stopping NFS</title>
<para>
You can manually start and stop the NFS share using these
commands:
<itemizedlist>
<listitem><para><emphasis><filename>start</filename>:</emphasis>
Starts the NFS share:
<literallayout class='monospaced'>
runqemu-export-rootfs start <replaceable>file-system-location</replaceable>
</literallayout>
</para></listitem>
<listitem><para><emphasis><filename>stop</filename>:</emphasis>
Stops the NFS share:
<literallayout class='monospaced'>
runqemu-export-rootfs stop <replaceable>file-system-location</replaceable>
</literallayout>
</para></listitem>
<listitem><para><emphasis><filename>restart</filename>:</emphasis>
Restarts the NFS share:
<literallayout class='monospaced'>
runqemu-export-rootfs restart <replaceable>file-system-location</replaceable>
</literallayout>
</para></listitem>
</itemizedlist>
</para>
</section>
</section>
<section id='qemu-tips-and-tricks'>
<title>Tips and Tricks</title>
<para>
The following list describes things you can do to make running QEMU
in the context of the Yocto Project a better experience:
<itemizedlist>
<listitem><para><emphasis>Switching Between Consoles:</emphasis>
When booting or running QEMU, you can switch between
supported consoles by using
Ctrl+Alt+<replaceable>number</replaceable>.
For example, Ctrl+Alt+3 switches you to the serial console as
long as that console is enabled.
Being able to switch consoles is helpful, for example, if the
main QEMU console breaks for some reason.
<note>
Usually, "2" gets you to the main console and "3" gets you
to the serial console.
</note>
</para></listitem>
<listitem><para><emphasis>Removing the Splash Screen:</emphasis>
You can remove the splash screen when QEMU is booting by
using Alt+left.
Removing the splash screen allows you to see what is happening
in the background.
</para></listitem>
<listitem><para><emphasis>Disabling the Cursor Grab:</emphasis>
The default QEMU integration captures the cursor within the
main window.
It does this since standard mouse devices only provide relative
input and not absolute coordinates.
You then have to break out of the grab using the "Ctrl+Alt" key
combination.
However, the Yocto Project's integration of QEMU enables the
wacom USB touch pad driver by default to allow input of absolute
coordinates.
This default means that the mouse can enter and leave the
main window without the grab taking effect leading to a better
user experience.
</para></listitem>
</itemizedlist>
</para>
</section>
</chapter>
<!--
vim: expandtab tw=80 ts=4
-->