blob: 9f4c38b2d4a071f1acf36a935c0595eaaa5773b9 [file] [log] [blame]
<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"
[<!ENTITY % poky SYSTEM "../poky.ent"> %poky; ] >
<chapter id='toaster-manual-intro'>
<title>Introduction</title>
<para>
Toaster is a web interface to the Yocto Project's
<ulink url='&YOCTO_DOCS_DEV_URL;#build-system-term'>OpenEmbedded build system</ulink>.
The interface enables you to configure and run your builds.
Information about builds is collected and stored in a database.
You can use Toaster to configure and start builds on multiple
remote build servers.
</para>
<note>
<para>
This release of Toaster does allow you to configure and initiate
builds.
However, you cannot use Toaster to customize image recipes, which
still must either be done by hand or through
<ulink url='&YOCTO_HOME_URL;/tools-resources/projects/hob'>Hob</ulink>.
As Toaster matures, it eventually will equal and surpass Hob
functionality, at which time Hob will be deprecated.
</para>
<para>
For more information on Hob,
see the
"<ulink url='&YOCTO_DOCS_DEV_URL;#image-development-using-hob'>Image Development Using Hob</ulink>"
section in the Yocto Project Development Manual.
</para>
</note>
<section id='intro-modes'>
<title>Toaster Operational Modes</title>
<para>
You can use Toaster in Analysis Mode or Build Mode:
<itemizedlist>
<listitem><para id='toaster-analysis-mode'><emphasis>Analysis Mode:</emphasis>
In Analysis Mode, you can record builds and statistics.
In this Mode, you directly access the
<filename>bitbake</filename> command, which you then use to
build images.</para>
<para>Analysis Mode requires you to have first started
Toaster and then to initiate your build using the
<filename>bitbake</filename> command from the shell.
Toaster must be started before the build or it will not
collect build data.</para>
<para>Toaster has the following capabilities in
Analysis Mode:
<itemizedlist>
<listitem><para>
See what was built (recipes and packages) and what
packages were installed into your final image.
</para></listitem>
<listitem><para>
Browse the directory structure of your image.
</para></listitem>
<listitem><para>
See the value of all variables in your build
configuration, and which files set each value.
</para></listitem>
<listitem><para>
Examine error, warning and trace messages to aid
in debugging.
</para></listitem>
<listitem><para>
See information about the BitBake tasks executed
and reused during your build, including those that
used shared state.
</para></listitem>
<listitem><para>
See dependency relationships between recipes,
packages and tasks
</para></listitem>
<listitem><para>
See performance information such as build time,
task time, CPU usage, and disk I/O.
</para></listitem>
</itemizedlist>
</para></listitem>
<listitem><para id='toaster-build-mode'><emphasis>Build Mode:</emphasis>
In Build Mode, Toaster handles the build configuration,
scheduling and execution.
In this mode, all your interaction with the build system
happens through the web interface.
You do not have direct access to the
<filename>bitbake</filename> command.</para>
<para>Using this mode, you configure and start your builds
within Toaster's GUI.
Each project can be configured for a specific version
of the build system.
As shipped, Toaster supports Yocto Project Releases 1.7 and
beyond.</para>
<para>Toaster has all the same capabilities in Build Mode
as it does in Analysis Mode plus the following:
<itemizedlist>
<listitem><para>
Browse layers listed in the various
<link linkend='layer-source'>layer sources</link>
that are available in your project (e.g. the
OpenEmbedded Metadata Index at
<ulink url='http://layers.openembedded.org/layerindex/'></ulink>).
</para></listitem>
<listitem><para>
Import your own layers for building.
</para></listitem>
<listitem><para>
Add and remove layers from your configuration.
</para></listitem>
<listitem><para>
Set configuration variables.
</para></listitem>
<listitem><para>
Select a target or multiple targets to build.
</para></listitem>
<listitem><para>
Start your builds.
</para></listitem>
</itemizedlist>
</para></listitem>
</itemizedlist>
</para>
</section>
<section id='toaster-installation-options'>
<title>Installation Options</title>
<para>
You can set Toaster up to run as a local instance or as a shared
hosted service.
Regardless of how you set up Toaster, both Analysis and Build
Modes are available.
</para>
<para>
When Toaster is set up as a local instance, all the components
reside on a single build host.
Fundamentally, a local instance of Toaster is suited for a single
user developing on a single build host.
</para>
<para>
<imagedata fileref="figures/simple-configuration.png" align="center" width="6in" depth="1.5in" />
</para>
<para>
Toaster as a hosted service is suited for multiple users
developing across several build hosts.
When Toaster is set up as a hosted service, its components can
be spread across several machines:
</para>
<para>
<imagedata fileref="figures/hosted-service.png" align="center" width="6in" depth="3.5in" />
</para>
</section>
<!--THIS EXTRA INFORMATION PROBABLY WILL GO AWAY
For additional information on installing and running Toaster, see the
"<ulink url='https://wiki.yoctoproject.org/wiki/Toaster#Installation_and_Running'>Installation and Running</ulink>"
section of the "Toaster" wiki page.
For complete information on the API and its search operation
URI, parameters, and responses, see the
<ulink url='https://wiki.yoctoproject.org/wiki/REST_API_Contracts'>REST API Contracts</ulink>
Wiki page.
</para>
-->
</chapter>