blob: bdf531dedf16d6cec2f39d1dcce9405c0fc67775 [file] [log] [blame]
# resulttool - regression analysis
#
# Copyright (c) 2019, Intel Corporation.
# Copyright (c) 2019, Linux Foundation
#
# This program is free software; you can redistribute it and/or modify it
# under the terms and conditions of the GNU General Public License,
# version 2, as published by the Free Software Foundation.
#
# This program is distributed in the hope it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
# more details.
#
import resulttool.resultutils as resultutils
import json
from oeqa.utils.git import GitRepo
import oeqa.utils.gitarchive as gitarchive
def compare_result(logger, base_name, target_name, base_result, target_result):
base_result = base_result.get('result')
target_result = target_result.get('result')
result = {}
if base_result and target_result:
for k in base_result:
base_testcase = base_result[k]
base_status = base_testcase.get('status')
if base_status:
target_testcase = target_result.get(k, {})
target_status = target_testcase.get('status')
if base_status != target_status:
result[k] = {'base': base_status, 'target': target_status}
else:
logger.error('Failed to retrieved base test case status: %s' % k)
if result:
resultstring = "Regression: %s\n %s\n" % (base_name, target_name)
for k in sorted(result):
resultstring += ' %s: %s -> %s\n' % (k, result[k]['base'], result[k]['target'])
else:
resultstring = "Match: %s\n %s" % (base_name, target_name)
return result, resultstring
def get_results(logger, source):
return resultutils.load_resultsdata(source, configmap=resultutils.regression_map)
def regression(args, logger):
base_results = get_results(logger, args.base_result)
target_results = get_results(logger, args.target_result)
regression_common(args, logger, base_results, target_results)
def regression_common(args, logger, base_results, target_results):
if args.base_result_id:
base_results = resultutils.filter_resultsdata(base_results, args.base_result_id)
if args.target_result_id:
target_results = resultutils.filter_resultsdata(target_results, args.target_result_id)
matches = []
regressions = []
notfound = []
for a in base_results:
if a in target_results:
base = list(base_results[a].keys())
target = list(target_results[a].keys())
# We may have multiple base/targets which are for different configurations. Start by
# removing any pairs which match
for c in base.copy():
for b in target.copy():
res, resstr = compare_result(logger, c, b, base_results[a][c], target_results[a][b])
if not res:
matches.append(resstr)
base.remove(c)
target.remove(b)
break
# Should only now see regressions, we may not be able to match multiple pairs directly
for c in base:
for b in target:
res, resstr = compare_result(logger, c, b, base_results[a][c], target_results[a][b])
if res:
regressions.append(resstr)
else:
notfound.append("%s not found in target" % a)
print("\n".join(sorted(matches)))
print("\n".join(sorted(regressions)))
print("\n".join(sorted(notfound)))
return 0
def regression_git(args, logger):
base_results = {}
target_results = {}
tag_name = "{branch}/{commit_number}-g{commit}/{tag_number}"
repo = GitRepo(args.repo)
revs = gitarchive.get_test_revs(logger, repo, tag_name, branch=args.branch)
if args.branch2:
revs2 = gitarchive.get_test_revs(logger, repo, tag_name, branch=args.branch2)
if not len(revs2):
logger.error("No revisions found to compare against")
return 1
if not len(revs):
logger.error("No revision to report on found")
return 1
else:
if len(revs) < 2:
logger.error("Only %d tester revisions found, unable to generate report" % len(revs))
return 1
# Pick revisions
if args.commit:
if args.commit_number:
logger.warning("Ignoring --commit-number as --commit was specified")
index1 = gitarchive.rev_find(revs, 'commit', args.commit)
elif args.commit_number:
index1 = gitarchive.rev_find(revs, 'commit_number', args.commit_number)
else:
index1 = len(revs) - 1
if args.branch2:
revs2.append(revs[index1])
index1 = len(revs2) - 1
revs = revs2
if args.commit2:
if args.commit_number2:
logger.warning("Ignoring --commit-number2 as --commit2 was specified")
index2 = gitarchive.rev_find(revs, 'commit', args.commit2)
elif args.commit_number2:
index2 = gitarchive.rev_find(revs, 'commit_number', args.commit_number2)
else:
if index1 > 0:
index2 = index1 - 1
# Find the closest matching commit number for comparision
# In future we could check the commit is a common ancestor and
# continue back if not but this good enough for now
while index2 > 0 and revs[index2].commit_number > revs[index1].commit_number:
index2 = index2 - 1
else:
logger.error("Unable to determine the other commit, use "
"--commit2 or --commit-number2 to specify it")
return 1
logger.info("Comparing:\n%s\nto\n%s\n" % (revs[index1], revs[index2]))
base_results = resultutils.git_get_result(repo, revs[index1][2])
target_results = resultutils.git_get_result(repo, revs[index2][2])
regression_common(args, logger, base_results, target_results)
return 0
def register_commands(subparsers):
"""Register subcommands from this plugin"""
parser_build = subparsers.add_parser('regression', help='regression file/directory analysis',
description='regression analysis comparing the base set of results to the target results',
group='analysis')
parser_build.set_defaults(func=regression)
parser_build.add_argument('base_result',
help='base result file/directory for the comparison')
parser_build.add_argument('target_result',
help='target result file/directory to compare with')
parser_build.add_argument('-b', '--base-result-id', default='',
help='(optional) filter the base results to this result ID')
parser_build.add_argument('-t', '--target-result-id', default='',
help='(optional) filter the target results to this result ID')
parser_build = subparsers.add_parser('regression-git', help='regression git analysis',
description='regression analysis comparing base result set to target '
'result set',
group='analysis')
parser_build.set_defaults(func=regression_git)
parser_build.add_argument('repo',
help='the git repository containing the data')
parser_build.add_argument('-b', '--base-result-id', default='',
help='(optional) default select regression based on configurations unless base result '
'id was provided')
parser_build.add_argument('-t', '--target-result-id', default='',
help='(optional) default select regression based on configurations unless target result '
'id was provided')
parser_build.add_argument('--branch', '-B', default='master', help="Branch to find commit in")
parser_build.add_argument('--branch2', help="Branch to find comparision revisions in")
parser_build.add_argument('--commit', help="Revision to search for")
parser_build.add_argument('--commit-number', help="Revision number to search for, redundant if --commit is specified")
parser_build.add_argument('--commit2', help="Revision to compare with")
parser_build.add_argument('--commit-number2', help="Revision number to compare with, redundant if --commit2 is specified")