README: update TSC
Benjamin Fair is taking over for Google. Update the TSC list, sort
alphabetically. Run prettier on the README.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: Ica6cc590d818a0546aba6df3fae397ab3bfad175
diff --git a/README.md b/README.md
index e555a63..543f0c9 100644
--- a/README.md
+++ b/README.md
@@ -141,28 +141,28 @@
### Will OpenBMC run on my Acme Server Corp. XYZ5000 motherboard?
This is a common question, particularly regarding boards from popular COTS
-(commercial off-the-shelf) vendors such as Supermicro and ASRock. You can see
+(commercial off-the-shelf) vendors such as Supermicro and ASRock. You can see
the list of supported boards by running `. setup` (with no further arguments) in
-the root of the OpenBMC source tree. Most of the platforms supported by OpenBMC
+the root of the OpenBMC source tree. Most of the platforms supported by OpenBMC
are specialized servers operated by companies running large datacenters, but
some more generic COTS servers are supported to varying degrees.
If your motherboard is not listed in the output of `. setup` it is not currently
-supported. Porting OpenBMC to a new platform is a non-trivial undertaking,
+supported. Porting OpenBMC to a new platform is a non-trivial undertaking,
ideally done with the assistance of schematics and other documentation from the
manufacturer (it is not completely infeasible to take on a porting effort
without documentation via reverse engineering, but it is considerably more
difficult, and probably involves a greater risk of hardware damage).
**However**, even if your motherboard is among those listed in the output of
-`. setup`, there are two significant caveats to bear in mind. First, not all
+`. setup`, there are two significant caveats to bear in mind. First, not all
ports are equally mature -- some platforms are better supported than others, and
-functionality on some "supported" boards may be fairly limited. Second, support
+functionality on some "supported" boards may be fairly limited. Second, support
for a motherboard is not the same as support for a complete system -- in
particular, fan control is critically dependent on not just the motherboard but
also the fans connected to it and the chassis that the board and fans are housed
in, both of which can vary dramatically between systems using the same board
-model. So while you may be able to compile and install an OpenBMC build on your
+model. So while you may be able to compile and install an OpenBMC build on your
system and get some basic functionality, rough edges (such as your cooling fans
running continuously at full throttle) are likely.
@@ -201,12 +201,12 @@
The Technical Steering Committee (TSC) guides the project. Members are:
-- Roxanne Clarke, IBM
-- Nancy Yuen, Google
+- Benjamin Fair, Google
- Patrick Williams, Meta
-- Terry Duncan, Intel
+- Roxanne Clarke, IBM
- Sagar Dharia, Microsoft
- Samer El-Haj-Mahmoud, Arm
+- Terry Duncan, Intel
## Contact