blob: e17a8f59968161474f5dc3709c5b980f08c09011 [file] [log] [blame]
# TC0 specific TFA configuration
DEPENDS += "scp-firmware util-linux-native gptfdisk-native"
FILESEXTRAPATHS:prepend := "${THISDIR}/files/tc:"
SRC_URI:append = " \
file://generate_metadata.py \
"
COMPATIBLE_MACHINE = "(tc?)"
TFA_PLATFORM = "tc"
TFA_BUILD_TARGET = "all fip"
TFA_UBOOT = "1"
TFA_INSTALL_TARGET = "bl1 fip"
TFA_MBEDTLS = "1"
TFA_DEBUG = "1"
TFA_SPD = "spmd"
TFA_SPMD_SPM_AT_SEL2 = "1"
TFA_TARGET_PLATFORM:tc0 = "0"
TFA_TARGET_PLATFORM:tc1 = "1"
EXTRA_OEMAKE += "TARGET_PLATFORM=${TFA_TARGET_PLATFORM}"
# Set optee as SP. Set spmc manifest and sp layout file to optee
DEPENDS += "optee-os"
TFA_SP_LAYOUT_FILE = "${RECIPE_SYSROOT}/lib/firmware/sp_layout.json"
TFA_ARM_SPMC_MANIFEST_DTS = "plat/arm/board/tc/fdts/tc_spmc_optee_sp_manifest.dts"
EXTRA_OEMAKE += "SCP_BL2=${RECIPE_SYSROOT}/firmware/scp_ramfw.bin"
EXTRA_OEMAKE += "TRUSTED_BOARD_BOOT=1 GENERATE_COT=1 ARM_ROTPK_LOCATION=devel_rsa \
ROT_KEY=plat/arm/board/common/rotpk/arm_rotprivk_rsa.pem"
EXTRA_OEMAKE += "PSA_FWU_SUPPORT=1 ARM_GPT_SUPPORT=1"
EXTRA_OEMAKE += "CTX_INCLUDE_MTE_REGS=1"
do_generate_gpt() {
gpt_image="${BUILD_DIR}/fip_gpt.bin"
fip_bin="${BUILD_DIR}/fip.bin"
# the FIP partition type is not standardized, so generate one
fip_type_uuid=`uuidgen --sha1 --namespace @dns --name "fip_type_uuid"`
# metadata partition type UUID, specified by the document:
# Platform Security Firmware Update for the A-profile Arm Architecture
# version: 1.0BET0
metadata_type_uuid="8a7a84a0-8387-40f6-ab41-a8b9a5a60d23"
location_uuid=`uuidgen`
FIP_A_uuid=`uuidgen`
FIP_B_uuid=`uuidgen`
# maximum FIP size 4MB. This is the current size of the FIP rounded up to an integer number of MB.
fip_max_size=4194304
fip_bin_size=$(stat -c %s $fip_bin)
if [ $fip_max_size -lt $fip_bin_size ]; then
bberror "FIP binary ($fip_bin_size bytes) is larger than the GPT partition ($fip_max_size bytes)"
fi
# maximum metadata size 512B. This is the current size of the metadata rounded up to an integer number of sectors.
metadata_max_size=512
metadata_file="${BUILD_DIR}/metadata.bin"
python3 ${WORKDIR}/generate_metadata.py --metadata_file $metadata_file \
--img_type_uuids $fip_type_uuid \
--location_uuids $location_uuid \
--img_uuids $FIP_A_uuid $FIP_B_uuid
# create GPT image. The GPT contains 2 FIP partitions: FIP_A and FIP_B, and 2 metadata partitions: FWU-Metadata and Bkup-FWU-Metadata.
# the GPT layout is the following:
# -----------------------
# Protective MBR
# -----------------------
# Primary GPT Header
# -----------------------
# FIP_A
# -----------------------
# FIP_B
# -----------------------
# FWU-Metadata
# -----------------------
# Bkup-FWU-Metadata
# -----------------------
# Secondary GPT Header
# -----------------------
sector_size=512
gpt_header_size=33 # valid only for 512-byte sectors
num_sectors_fip=`expr $fip_max_size / $sector_size`
num_sectors_metadata=`expr $metadata_max_size / $sector_size`
start_sector_1=`expr 1 + $gpt_header_size` # size of MBR is 1 sector
start_sector_2=`expr $start_sector_1 + $num_sectors_fip`
start_sector_3=`expr $start_sector_2 + $num_sectors_fip`
start_sector_4=`expr $start_sector_3 + $num_sectors_metadata`
num_sectors_gpt=`expr $start_sector_4 + $num_sectors_metadata + $gpt_header_size`
gpt_size=`expr $num_sectors_gpt \* $sector_size`
# create raw image
dd if=/dev/zero of=$gpt_image bs=$gpt_size count=1
# create the GPT layout
sgdisk $gpt_image \
--set-alignment 1 \
--disk-guid $location_uuid \
\
--new 1:$start_sector_1:+$num_sectors_fip \
--change-name 1:FIP_A \
--typecode 1:$fip_type_uuid \
--partition-guid 1:$FIP_A_uuid \
\
--new 2:$start_sector_2:+$num_sectors_fip \
--change-name 2:FIP_B \
--typecode 2:$fip_type_uuid \
--partition-guid 2:$FIP_B_uuid \
\
--new 3:$start_sector_3:+$num_sectors_metadata \
--change-name 3:FWU-Metadata \
--typecode 3:$metadata_type_uuid \
\
--new 4:$start_sector_4:+$num_sectors_metadata \
--change-name 4:Bkup-FWU-Metadata \
--typecode 4:$metadata_type_uuid
# populate the GPT partitions
dd if=$fip_bin of=$gpt_image bs=$sector_size seek=$start_sector_1 count=$num_sectors_fip conv=notrunc
dd if=$fip_bin of=$gpt_image bs=$sector_size seek=$start_sector_2 count=$num_sectors_fip conv=notrunc
dd if=$metadata_file of=$gpt_image bs=$sector_size seek=$start_sector_3 count=$num_sectors_metadata conv=notrunc
dd if=$metadata_file of=$gpt_image bs=$sector_size seek=$start_sector_4 count=$num_sectors_metadata conv=notrunc
}
addtask do_generate_gpt after do_compile before do_install
do_install:append() {
install -m 0644 ${BUILD_DIR}/fip_gpt.bin ${D}/firmware/fip_gpt-tc.bin
ln -sf fip_gpt-tc.bin ${D}/firmware/fip_gpt.bin
}