blob: 7bc807d2bc623a29e32eb8e1de73b754d971d997 [file] [log] [blame]
# Copyright (C) 2014 Intel Corporation
#
# Released under the MIT license (see COPYING.MIT)
# This module adds support to testimage.bbclass to deploy images and run
# tests on a Generic PC that boots using grub bootloader. The device must
# be set up as per README.hardware and the master image should be deployed
# onto the harddisk so that it boots into it by default.For booting into the
# image under test we interact with grub over serial, so for the
# Generic PC you will need an additional serial cable and device under test
# needs to have a serial interface. The separate ext3
# partition that will contain the image to be tested must be labelled
# "testrootfs" so that the deployment code below can find it.
import os
import bb
import time
import subprocess
import sys
import pexpect
import oeqa.utils.sshcontrol as sshcontrol
from oeqa.controllers.masterimage import MasterImageHardwareTarget
class GrubTarget(MasterImageHardwareTarget):
def __init__(self, d):
super(GrubTarget, self).__init__(d)
self.deploy_cmds = [
'mount -L boot /boot',
'mkdir -p /mnt/testrootfs',
'mount -L testrootfs /mnt/testrootfs',
'cp ~/test-kernel /boot',
'rm -rf /mnt/testrootfs/*',
'tar xvf ~/test-rootfs.%s -C /mnt/testrootfs' % self.image_fstype,
]
if not self.serialcontrol_cmd:
bb.fatal("This TEST_TARGET needs a TEST_SERIALCONTROL_CMD defined in local.conf.")
def _deploy(self):
# make sure these aren't mounted
self.master.run("umount /boot; umount /mnt/testrootfs;")
self.master.ignore_status = False
# Kernel files may not be in the image, so copy them just in case
self.master.copy_to(self.rootfs, "~/test-rootfs." + self.image_fstype)
self.master.copy_to(self.kernel, "~/test-kernel")
for cmd in self.deploy_cmds:
self.master.run(cmd)
def _start(self, params=None):
self.power_cycle(self.master)
try:
serialconn = pexpect.spawn(self.serialcontrol_cmd, env=self.origenv, logfile=sys.stdout)
serialconn.expect("GNU GRUB version 2.00")
serialconn.expect("Linux")
serialconn.sendline("x")
serialconn.expect("login:", timeout=120)
serialconn.close()
except pexpect.ExceptionPexpect as e:
bb.fatal('Serial interaction failed: %s' % str(e))
def _wait_until_booted(self):
try:
serialconn = pexpect.spawn(self.serialcontrol_cmd, env=self.origenv, logfile=sys.stdout)
serialconn.expect("login:", timeout=120)
serialconn.close()
except pexpect.ExceptionPexpect as e:
bb.fatal('Serial interaction failed: %s' % str(e))