blob: 9e5725ae54eabc0ea456764cd762e5c359167420 [file] [log] [blame]
#!/bin/bash
# Build performance regression test script
#
# Copyright 2011 Intel Corporation
# All rights reserved.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#
#
# DESCRIPTION
# This script is intended to be used in conjunction with "git bisect run"
# in order to find regressions in build time, however it can also be used
# independently. It cleans out the build output directories, runs a
# specified worker script (an example is test_build_time_worker.sh) under
# TIME(1), logs the results to TEST_LOGDIR (default /tmp) and returns a
# value telling "git bisect run" whether the build time is good (under
# the specified threshold) or bad (over it). There is also a tolerance
# option but it is not particularly useful as it only subtracts the
# tolerance from the given threshold and uses it as the actual threshold.
#
# It is also capable of taking a file listing git revision hashes to be
# test-applied to the repository in order to get past build failures that
# would otherwise cause certain revisions to have to be skipped; if a
# revision does not apply cleanly then the script assumes it does not
# need to be applied and ignores it.
#
# Please see the help output (syntax below) for some important setup
# instructions.
#
# AUTHORS
# Paul Eggleton <paul.eggleton@linux.intel.com>
syntax() {
echo "syntax: $0 <script> <time> <tolerance> [patchrevlist]"
echo ""
echo " script - worker script file (if in current dir, prefix with ./)"
echo " time - time threshold (in seconds, suffix m for minutes)"
echo " tolerance - tolerance (in seconds, suffix m for minutes or % for"
echo " percentage, can be 0)"
echo " patchrevlist - optional file listing revisions to apply as patches on top"
echo ""
echo "You must set TEST_BUILDDIR to point to a previously created build directory,"
echo "however please note that this script will wipe out the TMPDIR defined in"
echo "TEST_BUILDDIR/conf/local.conf as part of its initial setup (as well as your"
echo "~/.ccache)"
echo ""
echo "To get rid of the sudo prompt, please add the following line to /etc/sudoers"
echo "(use 'visudo' to edit this; also it is assumed that the user you are running"
echo "as is a member of the 'wheel' group):"
echo ""
echo "%wheel ALL=(ALL) NOPASSWD: /sbin/sysctl -w vm.drop_caches=[1-3]"
echo ""
echo "Note: it is recommended that you disable crond and any other process that"
echo "may cause significant CPU or I/O usage during build performance tests."
}
# Note - we exit with 250 here because that will tell git bisect run that
# something bad happened and stop
if [ "$1" = "" ] ; then
syntax
exit 250
fi
if [ "$2" = "" ] ; then
syntax
exit 250
fi
if [ "$3" = "" ] ; then
syntax
exit 250
fi
if ! [[ "$2" =~ ^[0-9][0-9m.]*$ ]] ; then
echo "'$2' is not a valid number for threshold"
exit 250
fi
if ! [[ "$3" =~ ^[0-9][0-9m.%]*$ ]] ; then
echo "'$3' is not a valid number for tolerance"
exit 250
fi
if [ "$TEST_BUILDDIR" = "" ] ; then
echo "Please set TEST_BUILDDIR to a previously created build directory"
exit 250
fi
if [ ! -d "$TEST_BUILDDIR" ] ; then
echo "TEST_BUILDDIR $TEST_BUILDDIR not found"
exit 250
fi
git diff --quiet
if [ $? != 0 ] ; then
echo "Working tree is dirty, cannot proceed"
exit 251
fi
if [ "$BB_ENV_EXTRAWHITE" != "" ] ; then
echo "WARNING: you are running after sourcing the build environment script, this is not recommended"
fi
runscript=$1
timethreshold=$2
tolerance=$3
if [ "$4" != "" ] ; then
patchrevlist=`cat $4`
else
patchrevlist=""
fi
if [[ timethreshold == *m* ]] ; then
timethreshold=`echo $timethreshold | sed s/m/*60/ | bc`
fi
if [[ $tolerance == *m* ]] ; then
tolerance=`echo $tolerance | sed s/m/*60/ | bc`
elif [[ $tolerance == *%* ]] ; then
tolerance=`echo $tolerance | sed s/%//`
tolerance=`echo "scale = 2; (($tolerance * $timethreshold) / 100)" | bc`
fi
tmpdir=`grep "^TMPDIR" $TEST_BUILDDIR/conf/local.conf | sed -e 's/TMPDIR[ \t]*=[ \t\?]*"//' -e 's/"//'`
if [ "x$tmpdir" = "x" ]; then
echo "Unable to determine TMPDIR from $TEST_BUILDDIR/conf/local.conf, bailing out"
exit 250
fi
sstatedir=`grep "^SSTATE_DIR" $TEST_BUILDDIR/conf/local.conf | sed -e 's/SSTATE_DIR[ \t\?]*=[ \t]*"//' -e 's/"//'`
if [ "x$sstatedir" = "x" ]; then
echo "Unable to determine SSTATE_DIR from $TEST_BUILDDIR/conf/local.conf, bailing out"
exit 250
fi
if [ `expr length $tmpdir` -lt 4 ] ; then
echo "TMPDIR $tmpdir is less than 4 characters, bailing out"
exit 250
fi
if [ `expr length $sstatedir` -lt 4 ] ; then
echo "SSTATE_DIR $sstatedir is less than 4 characters, bailing out"
exit 250
fi
echo -n "About to wipe out TMPDIR $tmpdir, press Ctrl+C to break out... "
for i in 9 8 7 6 5 4 3 2 1
do
echo -ne "\x08$i"
sleep 1
done
echo
pushd . > /dev/null
rm -f pseudodone
echo "Removing TMPDIR $tmpdir..."
rm -rf $tmpdir
echo "Removing TMPDIR $tmpdir-*libc..."
rm -rf $tmpdir-*libc
echo "Removing SSTATE_DIR $sstatedir..."
rm -rf $sstatedir
echo "Removing ~/.ccache..."
rm -rf ~/.ccache
echo "Syncing..."
sync
sync
echo "Dropping VM cache..."
#echo 3 > /proc/sys/vm/drop_caches
sudo /sbin/sysctl -w vm.drop_caches=3 > /dev/null
if [ "$TEST_LOGDIR" = "" ] ; then
logdir="/tmp"
else
logdir="$TEST_LOGDIR"
fi
rev=`git rev-parse HEAD`
logfile="$logdir/timelog_$rev.log"
echo -n > $logfile
gitroot=`git rev-parse --show-toplevel`
cd $gitroot
for patchrev in $patchrevlist ; do
echo "Applying $patchrev"
patchfile=`mktemp`
git show $patchrev > $patchfile
git apply --check $patchfile &> /dev/null
if [ $? != 0 ] ; then
echo " ... patch does not apply without errors, ignoring"
else
echo "Applied $patchrev" >> $logfile
git apply $patchfile &> /dev/null
fi
rm $patchfile
done
sync
echo "Quiescing for 5s..."
sleep 5
echo "Running $runscript at $rev..."
timeoutfile=`mktemp`
/usr/bin/time -o $timeoutfile -f "%e\nreal\t%E\nuser\t%Us\nsys\t%Ss\nmaxm\t%Mk" $runscript 2>&1 | tee -a $logfile
exitstatus=$PIPESTATUS
git reset --hard HEAD > /dev/null
popd > /dev/null
timeresult=`head -n1 $timeoutfile`
cat $timeoutfile | tee -a $logfile
rm $timeoutfile
if [ $exitstatus != 0 ] ; then
# Build failed, exit with 125 to tell git bisect run to skip this rev
echo "*** Build failed (exit code $exitstatus), skipping..." | tee -a $logfile
exit 125
fi
ret=`echo "scale = 2; $timeresult > $timethreshold - $tolerance" | bc`
echo "Returning $ret" | tee -a $logfile
exit $ret