| #!/bin/sh |
| |
| # shellcheck disable=SC2034 |
| # Index of GPIO device in gpioget/gpioset |
| GPIO_CHIP0_IDX=0 |
| GPIO_CHIP1_IDX=1 |
| |
| # Base of GPIO chip in /sys/class/gpio |
| GPIO_CHIP0_BASE=792 |
| GPIO_CHIP1_BASE=780 |
| |
| ### Power control configuration |
| # Power control gpios |
| S0_SHD_REQ_L=49 |
| S0_SHD_ACK_L=50 |
| S0_REBOOT_ACK_L=75 |
| S0_SYSRESET_L=91 |
| |
| |
| ### Table 1: GPIO Assignments |
| S0_CPU_FW_BOOT_OK=48 |
| CPU_BMC_OVERTEMP_L=51 |
| CPU_BMC_HIGHTEMP_L=72 |
| CPU_FAULT_ALERT=73 |
| S1_CPU_FW_BOOT_OK=202 |
| |
| ### Table 2: Alert and Additional Miscellaneous Signals |
| S0_SCP_AUTH_FAILURE=74 |
| S1_SCP_AUTH_FAILURE=205 |
| BMC_OK=228 |
| SLAVE_PRESENT_L=230 |
| |
| ### Common GPIOs |
| SYS_PSON_L=42 |
| BMC_READY=229 |
| |
| ### OCP power selection |
| OCP_AUX_PWREN=139 |
| OCP_MAIN_PWREN=140 |
| |
| ### SPI0 Mode selection |
| SPI0_PROGRAM_SEL=226 |
| SPI0_BACKUP_SEL=227 |