blob: 92f933b50f02153a3fc5c53a66cb859c0a53e3b2 [file] [log] [blame]
/dts-v1/;
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "HPE,GXP";
model = "GXP";
chosen {
bootargs = "earlyprintk console=ttyS0,115200 user_debug=31";
};
aliases {
};
memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x20000000>;
};
ahb@80000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
vic0: vic@ceff0000 {
compatible = "arm,pl192-vic";
interrupt-controller;
reg = <0xceff0000 0x1000>;
#interrupt-cells = <1>;
};
vic1: vic@80f00000 {
compatible = "arm,pl192-vic";
interrupt-controller;
reg = <0x80f00000 0x1000>;
#interrupt-cells = <1>;
};
timer0: timer@c0000080 {
compatible = "hpe,gxp-timer";
reg = <0xc0000080 0x1>, <0xc0000094 0x01>, <0xc0000088 0x08>;
interrupts = <0>;
interrupt-parent = <&vic0>;
clock-frequency = <400000000>;
};
watchdog: watchdog@c0000090 {
compatible = "hpe,gxp-wdt";
reg = <0xc0000090 0x02>, <0xc0000096 0x01>;
};
uartc: serial@c00000f0 {
compatible = "ns16550a";
reg = <0xc00000f0 0x8>;
interrupts = <19>;
interrupt-parent = <&vic0>;
clock-frequency = <1846153>;
reg-shift = <0>;
};
uarta: serial@c00000e0 {
compatible = "ns16550a";
reg = <0xc00000e0 0x8>;
interrupts = <17>;
interrupt-parent = <&vic0>;
clock-frequency = <1846153>;
reg-shift = <0>;
};
uartb: serial@c00000e8 {
compatible = "ns16550a";
reg = <0xc00000e8 0x8>;
interrupts = <18>;
interrupt-parent = <&vic0>;
clock-frequency = <1846153>;
reg-shift = <0>;
};
vuart_a_cfg: vuarta_cfg@80fc0230 {
compatible = "hpe,gxp-vuarta_cfg", "simple-mfd", "syscon";
reg = <0x80fc0230 0x100>;
reg-io-width = <1>;
};
vuart_a: vuart_a@80fd0200 {
compatible = "hpe,gxp-vuart";
reg = <0x80fd0200 0x100>;
interrupts = <2>;
interrupt-parent = <&vic1>;
clock-frequency = <1846153>;
reg-shift = <0>;
status = "okay";
serial-line = <3>;
vuart_cfg = <&vuart_a_cfg>;
};
usb0: ehci@cefe0000 {
compatible = "generic-ehci";
reg = <0xcefe0000 0x100>;
interrupts = <7>;
interrupt-parent = <&vic0>;
};
usb1: ohci@cefe0100 {
compatible = "generic-ohci";
reg = <0xcefe0100 0x110>;
interrupts = <6>;
interrupt-parent = <&vic0>;
};
spifi0: spifi@c0000200 {
compatible = "hpe,gxp-spifi";
reg = <0xc0000200 0x80>, <0xc000c000 0x100>, <0xf8000000 0x8000000>;
interrupts = <20>;
interrupt-parent = <&vic0>;
#address-cells = <1>;
#size-cells = <0>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
bmc@0 {
label = "bmc";
reg = <0x0 0x2000000>;
};
u-boot@0 {
label = "u-boot";
reg = <0x0 0x60000>;
};
u-boot-env@60000 {
label = "u-boot-env";
reg = <0x60000 0x20000>;
};
kernel@80000 {
label = "kernel";
reg = <0x80000 0x4c0000>;
};
rofs@540000 {
label = "rofs";
reg = <0x540000 0x1740000>;
};
rwfs@1c80000 {
label = "rwfs";
reg = <0x1c80000 0x250000>;
};
section@1edf000{
label = "section";
reg = <0x1ed0000 0x130000>;
};
};
};
flash@1 {
compatible = "jedec,spi-nor";
reg = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
host-prime@0 {
label = "host-prime";
reg = <0x0 0x02000000>;
};
host-second@0 {
label = "host-second";
reg = <0x02000000 0x02000000>;
};
};
};
};
sram@d0000000 {
compatible = "mtd-ram";
reg = <0xd0000000 0x80000>;
bank-width = <1>;
erase-size =<1>;
partition@0 {
label = "host-reserved";
reg = <0x0 0x10000>;
};
partition@10000 {
label = "nvram";
reg = <0x10000 0x70000>;
};
};
srom@80fc0000 {
compatible = "hpe,gxp-srom", "simple-mfd", "syscon";
reg = <0x80fc0000 0x100>;
};
vrom@58000000 {
compatible = "mtd-ram";
bank-width = <4>;
reg = <0x58000000 0x4000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "vrom-prime";
reg = <0x0 0x2000000>;
};
partition@2000000 {
label = "vrom-second";
reg = <0x2000000 0x2000000>;
};
};
i2cg: i2cg@c00000f8 {
compatible = "syscon";
reg = <0xc00000f8 0x08>;
};
i2c0: i2c@c0002000 {
compatible = "hpe,gxp-i2c";
reg = <0xc0002000 0x70>;
interrupts = <9>;
interrupt-parent = <&vic0>;
i2cg-handle = <&i2cg>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c1: i2c@c0002100 {
compatible = "hpe,gxp-i2c";
reg = <0xc0002100 0x70>;
interrupts = <9>;
interrupt-parent = <&vic0>;
i2cg-handle = <&i2cg>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c2: i2c@c0002200 {
compatible = "hpe,gxp-i2c";
reg = <0xc0002200 0x70>;
interrupts = <9>;
interrupt-parent = <&vic0>;
i2cg-handle = <&i2cg>;
#address-cells = <1>;
#size-cells = <0>;
24c02@50 {
compatible = "atmel,24c02";
pagesize = <8>;
reg = <0x50>;
};
};
i2c3: i2c@c0002300 {
compatible = "hpe,gxp-i2c";
reg = <0xc0002300 0x70>;
interrupts = <9>;
interrupt-parent = <&vic0>;
i2cg-handle = <&i2cg>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c4: i2c@c0002400 {
compatible = "hpe,gxp-i2c";
reg = <0xc0002400 0x70>;
interrupts = <9>;
interrupt-parent = <&vic0>;
i2cg-handle = <&i2cg>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c5: i2c@c0002500 {
compatible = "hpe,gxp-i2c";
reg = <0xc0002500 0x70>;
interrupts = <9>;
interrupt-parent = <&vic0>;
i2cg-handle = <&i2cg>;
};
i2c6: i2c@c0002600 {
compatible = "hpe,gxp-i2c";
reg = <0xc0002600 0x70>;
interrupts = <9>;
interrupt-parent = <&vic0>;
i2cg-handle = <&i2cg>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c7: i2c@c0002700 {
compatible = "hpe,gxp-i2c";
reg = <0xc0002700 0x70>;
interrupts = <9>;
interrupt-parent = <&vic0>;
i2cg-handle = <&i2cg>;
#address-cells = <1>;
#size-cells = <0>;
psu1: psu@58 {
compatible = "hpe,gxp-psu";
reg = <0x58>;
};
psu2: psu@59 {
compatible = "hpe,gxp-psu";
reg = <0x59>;
};
};
i2c8: i2c@c0002800 {
compatible = "hpe,gxp-i2c";
reg = <0xc0002800 0x70>;
interrupts = <9>;
interrupt-parent = <&vic0>;
i2cg-handle = <&i2cg>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c9: i2c@c0002900 {
compatible = "hpe,gxp-i2c";
reg = <0xc0002900 0x70>;
interrupts = <9>;
interrupt-parent = <&vic0>;
i2cg-handle = <&i2cg>;
#address-cells = <1>;
#size-cells = <0>;
};
i2cmux@4 {
compatible = "i2c-mux-reg";
i2c-parent = <&i2c4>;
reg = <0xd1000374 1>;
#address-cells = <1>;
#size-cells = <0>;
i2c4@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c4@3 {
reg = <3>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c4@4 {
reg = <4>;
#address-cells = <1>;
#size-cells = <0>;
};
};
i2cmux@6 {
compatible = "i2c-mux-reg";
i2c-parent = <&i2c6>;
reg = <0xd1000376 1>;
#address-cells = <1>;
#size-cells = <0>;
i2c6@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c6@2 {
reg = <2>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c6@3 {
reg = <3>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c6@4 {
reg = <4>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c6@5 {
reg = <5>;
#address-cells = <1>;
#size-cells = <0>;
};
};
mdio0: mdio@c0004080 {
compatible = "hpe,gxp-umac-mdio";
reg = <0xc0004080 0x10>;
#address-cells = <1>;
#size-cells = <0>;
ext_phy0: ethernt-phy@0 {
compatible = "marvell,88e1415","ethernet-phy-ieee802.3-c22";
phy-mode = "sgmii";
reg = <0>;
};
};
mdio1: mdio@c0005080 {
compatible = "hpe,gxp-umac-mdio";
reg = <0xc0005080 0x10>;
#address-cells = <1>;
#size-cells = <0>;
int_phy0: ethernt-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
phy-mode = "gmii";
reg = <0>;
};
int_phy1: ethernt-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
phy-mode = "gmii";
reg = <1>;
};
};
umac0: umac@c0004000 {
compatible = "hpe, gxp-umac";
reg = <0xc0004000 0x80>;
interrupts = <10>;
interrupt-parent = <&vic0>;
mac-address = [94 18 82 16 04 d8];
phy-handle = <&ext_phy0>;
int-phy-handle = <&int_phy0>;
};
umac1: umac@c0005000 {
compatible = "hpe, gxp-umac";
use-ncsi;
reg = <0xc0005000 0x80>;
interrupts = <11>;
interrupt-parent = <&vic0>;
mac-address = [94 18 82 16 04 d9];
phy-handle = <&int_phy1>;
};
kcs_conf: kcs_conf@80fc0430 {
compatible = "hpe,gxp-kcs-bmc-cfg", "simple-mfd", "syscon";
reg = <0x80fc0430 0x100>;
};
kcs_reg: kcs_reg@080fd0400 {
compatible = "hpe,gxp-kcs-bmc";
reg = <0x80fd0400 0x8>;
interrupts = <6>;
interrupt-parent = <&vic1>;
kcs_chan = <1>;
status = "okay";
kcs-bmc-cfg = <&kcs_conf>;
};
thumbnail: thumbnail@c0000500 {
compatible = "hpe,gxp-thumbnail";
reg = <0xc0000500 0x20>;
bits-per-pixel = <32>;
width = <800>;
height = <600>;
};
xreg: xreg@d1000300 {
compatible = "hpe,gxp-xreg", "simple-mfd", "syscon";
reg = <0xd1000300 0xFF>;
interrupts = <26>;
interrupt-parent = <&vic0>;
#gpio-cells = <2>;
gpio-line-names =
"", "", "", "", "", "", "POWER", "HEARTBEAT", "FAN1_INST", "FAN2_INST",
"FAN3_INST", "FAN4_INST", "FAN5_INST", "FAN6_INST", "FAN7_INST", "FAN8_INST", "FAN9_INST", "FAN10_INST", "FAN11_INST", "FAN12_INST",
"FAN13_INST", "FAN14_INST", "FAN15_INST", "FAN16_INST", "FAN1_FAIL", "FAN2_FAIL", "FAN3_FAIL", "FAN4_FAIL", "FAN5_FAIL", "FAN6_FAIL",
"FAN7_FAIL", "FAN8_FAIL", "FAN9_FAIL", "FAN10_FAIL", "FAN11_FAIL", "FAN12_FAIL", "FAN13_FAIL", "FAN14_FAIL", "FAN15_FAIL", "FAN16_FAIL",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "IDENTIFY", "HEALTH_RED", "HEALTH_AMBER", "POWER_BUTTON",
"", "SIO_POWER_GOOD", "NMI_BUTTON", "RESET_BUTTON", "SIO_S5", "SIO_ONCONTROL", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "";
};
fanctrl: fanctrl@c1000c00 {
compatible = "hpe,gxp-fan-ctrl";
reg = <0xc1000c00 0x200>;
xreg_handle = <&xreg>;
fn2_handle = <&fn2>;
};
fn2: fn2@80200000 {
compatible = "hpe,gxp-fn2", "simple-mfd", "syscon";
reg = <0x80200000 0x100000>;
xreg_handle = <&xreg>;
interrupts = <0>;
interrupt-parent = <&vic1>;
#gpio-cells = <2>;
gpio-line-names =
"POWER_OUT", "PS_PWROK", "PCIERST", "POST_COMPLETE", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "";
chif {
compatible = "hpe,gxp-chif";
interrupts = <12>;
};
};
csm: csm@80000000 {
compatible = "hpe,gxp-csm", "simple-mfd", "syscon";
reg = <0x80000000 0x400>;
};
gpio: gpio@0 {
compatible = "hpe,gxp-gpio";
#gpio-cells = <2>;
csm_handle = <&csm>;
vuhc0_handle = <&vuhc0>;
gpio-line-names =
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "RESET_OUT", "NMI_OUT", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "";
};
leds: leds {
compatible = "gpio-leds";
power {
gpios = <&xreg 6 0>;
default-state = "off";
};
heartbeat {
gpios = <&xreg 7 0>;
default-state = "off";
};
identify {
gpios = <&xreg 56 0>;
default-state = "off";
};
health_red {
gpios = <&xreg 57 0>;
default-state = "off";
};
health_amber {
gpios = <&xreg 58 0>;
default-state = "off";
};
};
xreg_kyes: xreg_keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
IdButton {
label = "ID Button";
linux,code = <200>;
gpios = <&xreg 60 1>;
};
};
vuhc: vuhc {
compatible = "gpio-keys-polled";
poll-interval = <100>;
PortOwner@0 {
label = "Port Owner";
linux,code = <200>;
gpios = <&gpio 250 1>;
};
PortOwner@1 {
label = "Port Owner";
linux,code = <201>;
gpios = <&gpio 251 1>;
};
PortOwner@2 {
label = "Port Owner";
linux,code = <202>;
gpios = <&gpio 252 1>;
};
};
vuhc0: vuhc@80400080 {
compatible = "syscon";
reg = <0x80400000 0x80>;
};
udcg: udcg@80400800 {
compatible = "syscon";
reg = <0x80400800 0x200>;
};
udc0: udc@80401000 {
compatible = "hpe, gxp-udc";
reg = <0x80401000 0x1000>;
interrupts = <13>;
interrupt-parent = <&vic1>;
vdevnum = <0>;
fepnum = <4>;
udcg-handle = <&udcg>;
};
udc1: udc@80402000 {
compatible = "hpe, gxp-udc";
reg = <0x80402000 0x1000>;
interrupts = <13>;
interrupt-parent = <&vic1>;
vdevnum = <1>;
fepnum = <4>;
udcg-handle = <&udcg>;
};
udc2: udc@80403000 {
compatible = "hpe, gxp-udc";
reg = <0x80403000 0x1000>;
interrupts = <13>;
interrupt-parent = <&vic1>;
vdevnum = <2>;
fepnum = <4>;
udcg-handle = <&udcg>;
};
coretemp: coretemp@c0000130 {
compatible = "hpe,gxp-coretemp";
reg = <0xc0000130 0x8>;
};
syspower: syspower {
compatible = "hpe,gxp-power";
psu_phandle = <&psu1>, <&psu2>;
};
peci: peci@80000400 {
compatible = "hpe,gxp-peci";
reg = <0x80000400 0x200>;
interrupts = <22>;
interrupt-parent = <&vic1>;
};
};
clocks {
osc: osc {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-output-names = "osc";
clock-frequency = <33333333>;
};
iopclk: iopclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clocks = <&osc>;
clock-out-put-names = "iopclk";
clock-frequency = <400000000>;
};
memclk: memclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clocks = <&osc>;
clock-out-put-names = "memclk";
clock-frequency = <800000000>;
};
};
};