meta-alibaba: remove unusable thor machine
This machine is unbuildable and has not been updated in the requisite 2
months per https://lore.kernel.org/openbmc/YRUW7cazmCjW8VpP@heinlein/,
so it is being deleted.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I232a7a2d3e678a2396732d96e38f864704ba5cae
diff --git a/meta-alibaba/OWNERS b/meta-alibaba/OWNERS
deleted file mode 100644
index d8b39a3..0000000
--- a/meta-alibaba/OWNERS
+++ /dev/null
@@ -1,2 +0,0 @@
-owners:
-- SnowYang@linux.alibaba.com
diff --git a/meta-alibaba/conf/layer.conf b/meta-alibaba/conf/layer.conf
deleted file mode 100644
index 715ba51..0000000
--- a/meta-alibaba/conf/layer.conf
+++ /dev/null
@@ -1,7 +0,0 @@
-# We have a conf and classes directory, add to BBPATH
-BBPATH .= ":${LAYERDIR}"
-# We have recipes-* directories, add to BBFILES
-
-BBFILE_COLLECTIONS += "alibaba-layer"
-BBFILE_PATTERN_alibaba-layer = "^${LAYERDIR}/"
-LAYERSERIES_COMPAT_alibaba-layer = "hardknott"
diff --git a/meta-alibaba/meta-comm-oem/recipes-phosphor/packagegroups/packagegroup-alibaba-apps.bb b/meta-alibaba/meta-comm-oem/recipes-phosphor/packagegroups/packagegroup-alibaba-apps.bb
deleted file mode 100644
index ac6f99b..0000000
--- a/meta-alibaba/meta-comm-oem/recipes-phosphor/packagegroups/packagegroup-alibaba-apps.bb
+++ /dev/null
@@ -1,32 +0,0 @@
-SUMMARY = "OpenBMC for Alibaba - Applications"
-PR = "r1"
-
-inherit packagegroup
-
-PROVIDES = "${PACKAGES}"
-PACKAGES = " \
- ${PN}-system \
- ${PN}-tools \
- "
-
-PROVIDES += "virtual/obmc-system-mgmt"
-RPROVIDES_${PN}-system += "virtual-obmc-system-mgmt"
-
-SUMMARY_${PN}-system = "Alibaba System"
-RDEPENDS_${PN}-system = " \
- entity-manager \
- dbus-sensors \
- phosphor-ipmi-ipmb \
- phosphor-hostlogger \
- phosphor-sel-logger \
- phosphor-post-code-manager \
- phosphor-host-postd \
- "
-PROVIDES += "virtual/obmc-tools-mgmt"
-RPROVIDES_${PN}-tools += "virtual-obmc-tools-mgmt"
-
-SUMMARY_${PN}-tools = "Alibaba Tools"
-RDEPENDS_${PN}-tools = " \
- ipmitool \
- "
-
diff --git a/meta-alibaba/meta-thor/conf/bblayers.conf.sample b/meta-alibaba/meta-thor/conf/bblayers.conf.sample
deleted file mode 100644
index 1884f55..0000000
--- a/meta-alibaba/meta-thor/conf/bblayers.conf.sample
+++ /dev/null
@@ -1,29 +0,0 @@
-# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
-# changes incompatibly
-LCONF_VERSION = "8"
-BBPATH = "${TOPDIR}"
-BBFILES ?= ""
-BBLAYERS ?= " \
- ##OEROOT##/meta \
- ##OEROOT##/meta-openembedded/meta-oe \
- ##OEROOT##/meta-openembedded/meta-networking \
- ##OEROOT##/meta-openembedded/meta-perl \
- ##OEROOT##/meta-openembedded/meta-python \
- ##OEROOT##/meta-security \
- ##OEROOT##/meta-phosphor \
- ##OEROOT##/meta-aspeed \
- ##OEROOT##/meta-alibaba \
- ##OEROOT##/meta-alibaba/meta-thor \
- "
-BBLAYERS_NON_REMOVABLE ?= " \
- ##OEROOT##/meta \
- ##OEROOT##/meta-openembedded/meta-oe \
- ##OEROOT##/meta-openembedded/meta-networking \
- ##OEROOT##/meta-openembedded/meta-perl \
- ##OEROOT##/meta-openembedded/meta-python \
- ##OEROOT##/meta-security \
- ##OEROOT##/meta-phosphor \
- ##OEROOT##/meta-aspeed \
- ##OEROOT##/meta-alibaba \
- ##OEROOT##/meta-alibaba/meta-thor \
- "
diff --git a/meta-alibaba/meta-thor/conf/conf-notes.txt b/meta-alibaba/meta-thor/conf/conf-notes.txt
deleted file mode 100644
index 9b3c01a..0000000
--- a/meta-alibaba/meta-thor/conf/conf-notes.txt
+++ /dev/null
@@ -1,2 +0,0 @@
-Common targets are:
- obmc-phosphor-image
diff --git a/meta-alibaba/meta-thor/conf/layer.conf b/meta-alibaba/meta-thor/conf/layer.conf
deleted file mode 100644
index 6ae6271..0000000
--- a/meta-alibaba/meta-thor/conf/layer.conf
+++ /dev/null
@@ -1,9 +0,0 @@
-# We have a conf and classes directory, add to BBPATH
-BBPATH .= ":${LAYERDIR}"
-# We have recipes-* directories, add to BBFILES
-BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \
- ${LAYERDIR}/recipes-*/*/*.bbappend"
-
-BBFILE_COLLECTIONS += ""
-BBFILE_PATTERN := "^${LAYERDIR}/"
-LAYERSERIES_COMPAT = "hardknott"
diff --git a/meta-alibaba/meta-thor/conf/local.conf.sample b/meta-alibaba/meta-thor/conf/local.conf.sample
deleted file mode 100644
index 0f82735..0000000
--- a/meta-alibaba/meta-thor/conf/local.conf.sample
+++ /dev/null
@@ -1,198 +0,0 @@
-#
-# This file is your local configuration file and is where all local user settings
-# are placed. The comments in this file give some guide to the options a new user
-# to the system might want to change but pretty much any configuration option can
-# be set in this file.
-#
-# Lines starting with the '#' character are commented out and in some cases the
-# default values are provided as comments to show people example syntax. Enabling
-# the option is a question of removing the # character and making any change to the
-# variable as required.
-#
-# Machine Selection
-#
-MACHINE ??= "template"
-#
-# Where to place downloads
-#
-# During a first build the system will download many different source code tarballs
-# from various upstream projects. This can take a while, particularly if your network
-# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
-# can preserve this directory to speed up this part of subsequent builds. This directory
-# is safe to share between multiple builds on the same machine too.
-#
-# The default is a downloads directory under TOPDIR which is the build directory.
-#
-DL_DIR ?= "${TOPDIR}/../downloads"
-#
-# Where to place shared-state files
-#
-# BitBake has the capability to accelerate builds based on previously built output.
-# This is done using "shared state" files which can be thought of as cache objects
-# and this option determines where those files are placed.
-#
-# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
-# from these files if no changes were made to the configuration. If changes were made
-# to the configuration, only shared state files where the state was still valid would
-# be used (done using checksums).
-#
-# The default is a sstate-cache directory under TOPDIR.
-#
-#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
-#
-# Where to place the build output
-#
-# This option specifies where the bulk of the building work should be done and
-# where BitBake should place its temporary files and output. Keep in mind that
-# this includes the extraction and compilation of many applications and the toolchain
-# which can use Gigabytes of hard disk space.
-#
-# The default is a tmp directory under TOPDIR.
-#
-#TMPDIR = "${TOPDIR}/tmp"
-#
-# Default policy config
-#
-# The distribution setting controls which policy settings are used as defaults.
-# The default value is fine for general Yocto project use, at least initially.
-# Ultimately when creating custom policy, people will likely end up subclassing
-# these defaults.
-#
-DISTRO ?= "openbmc-phosphor"
-# As an example of a subclass there is a "bleeding" edge policy configuration
-# where many versions are set to the absolute latest code from the upstream
-# source control systems. This is just mentioned here as an example, its not
-# useful to most new users.
-# DISTRO ?= "poky-bleeding"
-#
-# Package Management configuration
-#
-# This variable lists which packaging formats to enable. Multiple package backends
-# can be enabled at once and the first item listed in the variable will be used
-# to generate the root filesystems.
-# Options are:
-# - 'package_deb' for debian style deb files
-# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
-# - 'package_rpm' for rpm style packages
-# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
-# We default to ipk:
-PACKAGE_CLASSES ?= "package_ipk"
-#
-# SDK/ADT target architecture
-#
-# This variable specifies the architecture to build SDK/ADT items for and means
-# you can build the SDK packages for architectures other than the machine you are
-# running the build on (i.e. building i686 packages on an x86_64 host).
-# Supported values are i686 and x86_64
-#SDKMACHINE ?= "i686"
-SANITY_TESTED_DISTROS_append ?= " *"
-#
-# Extra image configuration defaults
-#
-# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
-# images. Some of these options are added to certain image types automatically. The
-# variable can contain the following options:
-# "dbg-pkgs" - add -dbg packages for all installed packages
-# (adds symbol information for debugging/profiling)
-# "dev-pkgs" - add -dev packages for all installed packages
-# (useful if you want to develop against libs in the image)
-# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
-# (useful if you want to run the package test suites)
-# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
-# "tools-debug" - add debugging tools (gdb, strace)
-# "eclipse-debug" - add Eclipse remote debugging support
-# "tools-profile" - add profiling tools (oprofile, exmap, lttng, valgrind)
-# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
-# "debug-tweaks" - make an image suitable for development
-# e.g. ssh root access has a blank password
-# There are other application targets that can be used here too, see
-# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
-# We default to enabling the debugging tweaks.
-EXTRA_IMAGE_FEATURES = "debug-tweaks"
-#
-# Additional image features
-#
-# The following is a list of additional classes to use when building images which
-# enable extra features. Some available options which can be included in this variable
-# are:
-# - 'buildstats' collect build statistics
-# - 'image-prelink' in order to prelink the filesystem image
-# - 'image-swab' to perform host system intrusion detection
-# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
-# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
-USER_CLASSES ?= "buildstats image-prelink"
-#
-# Runtime testing of images
-#
-# The build system can test booting virtual machine images under qemu (an emulator)
-# after any root filesystems are created and run tests against those images. To
-# enable this uncomment this line. See classes/testimage(-auto).bbclass for
-# further details.
-#TEST_IMAGE = "1"
-#
-# Interactive shell configuration
-#
-# Under certain circumstances the system may need input from you and to do this it
-# can launch an interactive shell. It needs to do this since the build is
-# multithreaded and needs to be able to handle the case where more than one parallel
-# process may require the user's attention. The default is iterate over the available
-# terminal types to find one that works.
-#
-# Examples of the occasions this may happen are when resolving patches which cannot
-# be applied, to use the devshell or the kernel menuconfig
-#
-# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
-# Note: currently, Konsole support only works for KDE 3.x due to the way
-# newer Konsole versions behave
-#OE_TERMINAL = "auto"
-# By default disable interactive patch resolution (tasks will just fail instead):
-PATCHRESOLVE = "noop"
-#
-# Disk Space Monitoring during the build
-#
-# Monitor the disk space during the build. If there is less that 1GB of space or less
-# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
-# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
-# of the build. The reason for this is that running completely out of space can corrupt
-# files and damages the build in ways which may not be easily recoverable.
-# It's necessary to monitor /tmp, if there is no space left the build will fail
-# with very exotic errors.
-BB_DISKMON_DIRS = "\
- STOPTASKS,${TMPDIR},1G,100K \
- STOPTASKS,${DL_DIR},1G,100K \
- STOPTASKS,${SSTATE_DIR},1G,100K \
- STOPTASKS,/tmp,100M,100K \
- ABORT,${TMPDIR},100M,1K \
- ABORT,${DL_DIR},100M,1K \
- ABORT,${SSTATE_DIR},100M,1K \
- ABORT,/tmp,10M,1K"
-#
-# Shared-state files from other locations
-#
-# As mentioned above, shared state files are prebuilt cache data objects which can
-# used to accelerate build time. This variable can be used to configure the system
-# to search other mirror locations for these objects before it builds the data itself.
-#
-# This can be a filesystem directory, or a remote url such as http or ftp. These
-# would contain the sstate-cache results from previous builds (possibly from other
-# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
-# cache locations to check for the shared objects.
-# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
-# at the end as shown in the examples below. This will be substituted with the
-# correct path within the directory structure.
-#SSTATE_MIRRORS ?= "\
-#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
-#file://.* file:///some/local/dir/sstate/PATH"
-#
-# Qemu configuration
-#
-# By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. This assumes there is a
-# libsdl library available on your build system.
-#PACKAGECONFIG_append_pn-qemu-native = " sdl"
-#PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
-#ASSUME_PROVIDED += "libsdl-native"
-# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
-# track the version of this file when it was generated. This can safely be ignored if
-# this doesn't mean anything to you.
-CONF_VERSION = "1"
diff --git a/meta-alibaba/meta-thor/conf/machine/thor.conf b/meta-alibaba/meta-thor/conf/machine/thor.conf
deleted file mode 100644
index e20a2c7..0000000
--- a/meta-alibaba/meta-thor/conf/machine/thor.conf
+++ /dev/null
@@ -1,14 +0,0 @@
-KERNEL_DEVICETREE = "${KMACHINE}-alibaba-${MACHINE}.dtb"
-KMACHINE = "aspeed"
-require conf/machine/include/ast2500.inc
-
-
-UBOOT_MACHINE = "ast_g5_phy_config"
-FLASH_SIZE = "32768"
-
-# below contents will be gathered by macro 'MACHINE_FEATURES' which defined in phosphor-base.inc file
-OBMC_MACHINE_FEATURES += "\
- "
-VIRTUAL-RUNTIME_skeleton_workbook = "alibaba-ast2500-config"
-PREFERRED_PROVIDER_virtual/obmc-system-mgmt = "packagegroup-alibaba-apps"
-PREFERRED_PROVIDER_virtual/obmc-tools-mgmt = "packagegroup-alibaba-apps"
diff --git a/meta-alibaba/meta-thor/recipes-bsp/linux/linux-aspeed/alibaba.cfg b/meta-alibaba/meta-thor/recipes-bsp/linux/linux-aspeed/alibaba.cfg
deleted file mode 100644
index 174a3f2..0000000
--- a/meta-alibaba/meta-thor/recipes-bsp/linux/linux-aspeed/alibaba.cfg
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_DEVMEM=y
diff --git a/meta-alibaba/meta-thor/recipes-bsp/linux/linux-aspeed/aspeed-alibaba-thor.dts b/meta-alibaba/meta-thor/recipes-bsp/linux/linux-aspeed/aspeed-alibaba-thor.dts
deleted file mode 100644
index c05075d..0000000
--- a/meta-alibaba/meta-thor/recipes-bsp/linux/linux-aspeed/aspeed-alibaba-thor.dts
+++ /dev/null
@@ -1,292 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/dts-v1/;
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-/ {
- model = "Alibaba AST2500 BMC";
- compatible = "alibaba,thor", "aspeed,ast2500";
- aliases {
- serial4 = &uart5;
- spi2 = &spi2;
- };
- chosen {
- stdout-path = &uart5;
- bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
- };
- memory@80000000 {
- device_type = "memory";
- reg = <0x80000000 0x20000000>;
- };
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- vga_memory: framebuffer@9f000000 {
- no-map;
- reg = <0x9f000000 0x01000000>; /* 16M */
- };
- lpc_memory: region@98000000 {
- no-map;
- reg = <0x98000000 0x02000000>; /* 32M */
- };
- pci_memory: region@9A000000 {
- no-map;
- reg = <0x9A000000 0x00010000>; /* 64K */
- };
- video_engine_memory: jpegbuffer {
- size = <0x02800000>; /* 40M */
- alignment = <0x01000000>;
- compatible = "shared-dma-pool";
- reusable;
- };
- gfx_memory: framebuffer {
- size = <0x01000000>;
- alignment = <0x01000000>;
- compatible = "shared-dma-pool";
- reusable;
- };
- };
-};
-&fmc {
- status = "okay";
- flash@0 {
- status = "okay";
- m25p,fast-read;
- label = "bmc";
- spi-max-frequency = <50000000>;
- };
-};
-&spi1 {
- status = "disabled";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_spi1_default>;
- flash@0 {
- status = "okay";
- m25p,fast-read;
- label = "pnor";
- spi-max-frequency = <100000000>;
- };
-};
-&spi2 {
- compatible = "aspeed,spi-dev";
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_spi2ck_default
- &pinctrl_spi2cs0_default
- &pinctrl_spi2cs1_default
- &pinctrl_spi2miso_default
- &pinctrl_spi2mosi_default>;
- flash@0 {
- compatible = "rohm,dh2228fv";
- status = "okay";
- spi-max-frequency = <25000000>;
- };
-};
-&espi {
- status = "okay";
-};
-&kcs3 {
- kcs_addr = <0xca2>;
- status = "okay";
-};
-&lpc_ctrl {
- status = "okay";
- memory-region = <&lpc_memory>;
- flash = <&spi1>;
-};
-&p2a {
- status = "okay";
- memory-region = <&pci_memory>;
-};
-&mbox {
- status = "okay";
-};
-&uart1 {
- /* Rear RS-232 connector */
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_txd1_default
- &pinctrl_rxd1_default
- &pinctrl_nrts1_default
- &pinctrl_ndtr1_default
- &pinctrl_ndsr1_default
- &pinctrl_ncts1_default
- &pinctrl_ndcd1_default
- &pinctrl_nri1_default>;
-};
-&uart2 {
- /* Rear RS-232 connector */
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_txd2_default
- &pinctrl_rxd2_default
- &pinctrl_nrts2_default
- &pinctrl_ndtr2_default
- &pinctrl_ndsr2_default
- &pinctrl_ncts2_default
- &pinctrl_ndcd2_default
- &pinctrl_nri2_default>;
-};
-&uart4 {
- status = "okay";
-};
-&uart5 {
- status = "okay";
-};
-&mac0 {
- status = "okay";
- use-ncsi;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_rmii1_default>;
-};
-&mac1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
-};
-&adc {
- status = "okay";
-};
-&i2c0 {
- status = "okay";
-};
-&i2c1 {
- status = "okay";
-};
-&i2c2 {
- status = "okay";
-};
-&i2c3 {
- status = "okay";
-};
-&i2c4 {
- status = "okay";
-};
-&i2c5 {
- status = "okay";
-};
-&i2c6 {
- status = "okay";
-};
-&i2c7 {
- status = "okay";
-};
-&i2c8 {
- status = "okay";
-};
-&i2c9 {
- status = "okay";
-};
-&i2c10 {
- status = "okay";
-};
-&i2c11 {
- status = "okay";
-};
-&i2c12 {
- status = "okay";
-};
-&i2c13 {
- status = "okay";
-};
-&vuart {
- status = "disabled";
-};
-&gfx {
- status = "okay";
-};
-&pinctrl {
- aspeed,external-nodes = <&gfx &lhc>;
-};
-&pwm_tacho {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm0_default
- &pinctrl_pwm1_default
- &pinctrl_pwm2_default
- &pinctrl_pwm3_default
- &pinctrl_pwm4_default
- &pinctrl_pwm5_default
- &pinctrl_pwm6_default
- &pinctrl_pwm7_default>;
- fan@0 {
- reg = <0x00>;
- aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
- };
- fan@1 {
- reg = <0x01>;
- aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
- };
- fan@2 {
- reg = <0x02>;
- aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
- };
- fan@3 {
- reg = <0x03>;
- aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
- };
- fan@4 {
- reg = <0x04>;
- aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
- };
- fan@5 {
- reg = <0x05>;
- aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
- };
- fan@6 {
- reg = <0x06>;
- aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>;
- };
- fan@7 {
- reg = <0x07>;
- aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>;
- };
-};
-&lpc_uart {
- status = "okay";
-};
-&ibt {
- status = "disabled";
-};
-&lpc_snoop {
- status = "okay";
- snoop-ports = <0x80>;
-};
-&sdmmc {
- status = "okay";
-};
-&sdhci1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_sd2_default>;
-};
-/*
- * Enable port A as device (via the virtual hub) and port B as
- * host by default on the eval board. This can be easily changed
- * by replacing the override below with &ehci0 { ... } to enable
- * host on both ports.
- */
-&vhub {
- status = "okay";
-};
-&ehci1 {
- status = "okay";
-};
-&uhci {
- status = "okay";
-};
-&video {
- status = "okay";
- memory-region = <&video_engine_memory>;
-};
-&gfx {
- status = "okay";
- memory-region = <&gfx_memory>;
-};
-&peci0 {
- status = "okay";
-};
-&rtc {
- status = "okay";
-};
-
diff --git a/meta-alibaba/meta-thor/recipes-bsp/linux/linux-aspeed_%.bbappend b/meta-alibaba/meta-thor/recipes-bsp/linux/linux-aspeed_%.bbappend
deleted file mode 100644
index 18de4ac..0000000
--- a/meta-alibaba/meta-thor/recipes-bsp/linux/linux-aspeed_%.bbappend
+++ /dev/null
@@ -1,17 +0,0 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
-KERNEL_VERSION_SANITY_SKIP="1"
-SRC_URI += "\
- file://aspeed-alibaba-thor.dts \
- file://alibaba.cfg \
- "
-
-do_patch_append(){
- for DTB in "${KERNEL_DEVICETREE}"; do
- DT=`basename ${DTB} .dtb`
- if [ -r "${WORKDIR}/${DT}.dts" ]; then
- echo "debug: ${STAGING_KERNEL_DIR}"
- cp ${WORKDIR}/aspeed-alibaba-thor.dts \
- ${STAGING_KERNEL_DIR}/arch/${ARCH}/boot/dts
- fi
- done
-}