meta-fii: meta-mori: Add mori-boot and mori-cmd
Summary of Changes:
- Add basic mori.sh tool
- Add mori-boot for host and switch initialization
Signed-off-by: Charles Boyer <Charles.Boyer@fii-usa.com>
Change-Id: I2cee6a2b6a15a1e2f9a53baf331fb452f73f080d
diff --git a/meta-fii/meta-mori/recipes-mori/mori-sys-utility/mori-boot.bb b/meta-fii/meta-mori/recipes-mori/mori-sys-utility/mori-boot.bb
new file mode 100644
index 0000000..bceca8d
--- /dev/null
+++ b/meta-fii/meta-mori/recipes-mori/mori-sys-utility/mori-boot.bb
@@ -0,0 +1,30 @@
+SUMMARY = "Phosphor OpenBMC Mori System Power Control Service"
+DESCRIPTION = "Phosphor OpenBMC Mori System Power Control Daemon"
+
+PR = "r1"
+LICENSE = "Apache-2.0"
+LIC_FILES_CHKSUM = "file://${COREBASE}/meta/files/common-licenses/Apache-2.0;md5=89aea4e17d99a7cacdbeed46a0096b10"
+
+inherit systemd
+inherit obmc-phosphor-systemd
+
+DEPENDS += "systemd"
+RDEPENDS:${PN} += "libsystemd"
+RDEPENDS:${PN} += "bash"
+
+SRC_URI = " \
+ file://init_once.sh \
+ file://host-powerctrl.service \
+ "
+
+SYSTEMD_PACKAGES = "${PN}"
+SYSTEMD_SERVICE:${PN} = " \
+ host-powerctrl.service \
+ "
+
+do_install () {
+ install -d ${D}${libexecdir}/${PN}
+ install -m 0755 ${WORKDIR}/init_once.sh ${D}${libexecdir}/${PN}
+ install -d ${D}${systemd_unitdir}/system/
+ install -m 0644 ${WORKDIR}/host-powerctrl.service ${D}${systemd_unitdir}/system
+}
diff --git a/meta-fii/meta-mori/recipes-mori/mori-sys-utility/mori-boot/host-powerctrl.service b/meta-fii/meta-mori/recipes-mori/mori-sys-utility/mori-boot/host-powerctrl.service
new file mode 100644
index 0000000..8a67ffb
--- /dev/null
+++ b/meta-fii/meta-mori/recipes-mori/mori-sys-utility/mori-boot/host-powerctrl.service
@@ -0,0 +1,16 @@
+[Unit]
+Description = Host Power Control Sequence
+Wants=ssifbridge.service
+After=ssifbridge.service
+Wants=mori-bios-verify.service
+After=mori-bios-verify.service
+
+[Service]
+Restart=no
+RemainAfterExit=true
+Type=oneshot
+ExecStart=/usr/libexec/mori-boot/init_once.sh
+StandardOutput=syslog
+
+[Install]
+WantedBy=sysinit.target
diff --git a/meta-fii/meta-mori/recipes-mori/mori-sys-utility/mori-boot/init_once.sh b/meta-fii/meta-mori/recipes-mori/mori-sys-utility/mori-boot/init_once.sh
new file mode 100644
index 0000000..1c59aa0
--- /dev/null
+++ b/meta-fii/meta-mori/recipes-mori/mori-sys-utility/mori-boot/init_once.sh
@@ -0,0 +1,36 @@
+#!/bin/bash
+
+# Provide source directive to shellcheck.
+# shellcheck source=meta-fii/meta-mori/recipes-mori/mori-fw-utility/mori-fw/mori-lib.sh
+source /usr/libexec/mori-fw/mori-lib.sh
+
+function set_mux_default(){
+ # set all mux route to CPU before power on host
+ # BMC_CPU_DDR_I2C_SEL
+ set_gpio_ctrl CPU_DDR_SEL 1
+ # BMC_CPU_EEPROM_I2C_SEL
+ set_gpio_ctrl CPU_EEPROM_SEL 1
+ # BMC_CPU_PMBUS_SEL
+ set_gpio_ctrl CPU_VRD_SEL 1
+
+ # CPU Host UART Mux
+ set_gpio_ctrl S0_UART0_BMC_SEL 0
+ # SCP Host UART Mux
+ set_gpio_ctrl S0_UART1_BMC_SEL 0
+
+ # LED control
+ # LED_BMC_LIVE
+ set_gpio_ctrl LED_BMC_ALIVE 1
+}
+
+set_mux_default
+set_gpio_ctrl HPM_STBY_RST_N 1
+sleep 5
+set_gpio_ctrl S0_BMC_OK 1
+
+# Create /run/openbmc for system power files
+if [[ ! -d "/run/openbmc" ]]; then
+ mkdir "/run/openbmc"
+fi
+
+echo "BMC initialization complete"
diff --git a/meta-fii/meta-mori/recipes-mori/mori-sys-utility/mori-cmd.bb b/meta-fii/meta-mori/recipes-mori/mori-sys-utility/mori-cmd.bb
new file mode 100644
index 0000000..34d9e04
--- /dev/null
+++ b/meta-fii/meta-mori/recipes-mori/mori-sys-utility/mori-cmd.bb
@@ -0,0 +1,19 @@
+SUMMARY = "Phosphor OpenBMC Mori System Command"
+DESCRIPTION = "Phosphor OpenBMC Mori System Command Daemon"
+
+PR = "r1"
+LICENSE = "Apache-2.0"
+LIC_FILES_CHKSUM = "file://${COREBASE}/meta/files/common-licenses/Apache-2.0;md5=89aea4e17d99a7cacdbeed46a0096b10"
+
+RDEPENDS:${PN} += "bash"
+
+SRC_URI = " \
+ file://mori.sh \
+ "
+
+SYSTEMD_PACKAGES = "${PN}"
+
+do_install () {
+ install -d ${D}${sbindir}
+ install -m 0755 ${WORKDIR}/mori.sh ${D}${sbindir}/mori.sh
+}
diff --git a/meta-fii/meta-mori/recipes-mori/mori-sys-utility/mori-cmd/mori.sh b/meta-fii/meta-mori/recipes-mori/mori-sys-utility/mori-cmd/mori.sh
new file mode 100644
index 0000000..d9ad531
--- /dev/null
+++ b/meta-fii/meta-mori/recipes-mori/mori-sys-utility/mori-cmd/mori.sh
@@ -0,0 +1,266 @@
+#!/bin/bash
+# help information
+
+# Provide source directive to shellcheck.
+# shellcheck source=meta-fii/meta-mori/recipes-mori/mori-fw-utility/mori-fw/mori-lib.sh
+source /usr/libexec/mori-fw/mori-lib.sh
+
+function usage_rst() {
+ echo " mori rst [parameter]"
+ echo " hotswap --> reset the whole mori node"
+ echo " system --> reset the host"
+ echo " btn --> trigger a power button event"
+ echo " shutdown --> send out shutdown signal to CPU"
+ echo " display --> "
+}
+
+function usage_led() {
+ echo " mori led 'attn'/'boot' [parameter]"
+ echo " on --> turn led on"
+ echo " off --> turn led off"
+ echo " toggle --> toggle led"
+ echo " status --> get status of led"
+}
+
+function usage_uart() {
+ echo " mori uart [parameter]"
+ echo " host --> show CPU console"
+ echo " mpro --> show Mpro console"
+ echo " swhost --> change to CPU console to ttyS1"
+ echo " swmpro --> change to CPU 0 Mpro console to ttyS3"
+ echo " swhosthr --> change CPU console to header"
+ echo " swmprohr --> change Mpro console to header"
+ echo " display --> "
+}
+
+function usage() {
+ echo " mori BMC console system utilities"
+ echo " mori [optional] [parameter]"
+ echo " rst --> reset traget device"
+ echo " fw --> get version"
+ echo " uart --> control the uart mux"
+ echo " led --> control the leds"
+}
+
+function reset() {
+ case $1 in
+ hotswap)
+ # Virtual AC reset
+ echo "mori.sh rst hotswap occurred"
+ set_gpio_ctrl HOTSWAP 1
+ ;;
+ system)
+ # S0 system reset
+ set_gpio_ctrl S0_SYSRESET 0
+ sleep 1
+ set_gpio_ctrl S0_SYSRESET 1
+ ;;
+ btn)
+ # virtual power button on
+ set_gpio_ctrl POWER_OUT 0
+ sleep 1
+ set_gpio_ctrl POWER_OUT 1
+ ;;
+ shutdown)
+ # request host shutdown
+ set_gpio_ctrl S0_SHD_REQ 0
+ sleep 3
+ set_gpio_ctrl S0_SHD_REQ 1
+ ;;
+ forceOff)
+ # virtual power button off
+ set_gpio_ctrl POWER_OUT 0
+ sleep 6
+ set_gpio_ctrl POWER_OUT 1
+ ;;
+ display)
+ echo "Virtual AC Reset: GPIO$(get_gpio_num HOTSWAP)" "State:$(get_gpio_ctrl HOTSWAP)"
+ echo "Virtual Power Button: GPIO$(get_gpio_num POWER_OUT)" "State:$(get_gpio_ctrl POWER_OUT)"
+ echo "S0 System Reset: GPIO$(get_gpio_num S0_SYSRESET)" "State:$(get_gpio_ctrl S0_SYSRESET)"
+ echo "S0 Shutdown Request: GPIO$(get_gpio_num S0_SHD_REQ)" "State:$(get_gpio_ctrl S0_SHD_REQ)"
+ ;;
+ *)
+ usage_rst
+ ;;
+ esac
+}
+
+function fw_rev() {
+ BMC_CPLD_VER_FILE="/run/cpld0.version"
+ MB_CPLD_VER_FILE="/run/cpld1.version"
+
+ cmd=$(cat ${BMC_CPLD_VER_FILE})
+ echo " BMC_CPLD: " "${cmd}"
+ cmd=$(cat ${MB_CPLD_VER_FILE})
+ echo " MB_CPLD: " "${cmd}"
+
+ major=$(ipmitool mc info | grep "Firmware Revision" | awk '{print $4}')
+ cmd=$(ipmitool mc info | tail -4 | tr -s '\t' ' ' | tr -s '\n' ' ')
+
+ for hex in $cmd; do
+ minor="${hex:2}$minor";
+ done
+
+ minor=$(echo "obase=10; ibase=16; ${minor^^}" | bc)
+ echo " BMC : " "${major}"."${minor}"
+
+ #BMC PWR Sequencer
+ i2cset -y -f -a "${I2C_BMC_PWRSEQ[0]}" 0x"${I2C_BMC_PWRSEQ[1]}" 0xfe 0x0000 w
+ cmd=$(i2cget -y -f -a "${I2C_BMC_PWRSEQ[0]}" 0x"${I2C_BMC_PWRSEQ[1]}" 0xfe i 2 | awk '{print substr($0,3)}')
+ echo " BMC PowerSequencer : ${cmd}"
+ #only display with smbios exists
+ if [[ -e /var/lib/smbios/smbios2 ]]; then
+ cmd=$(busctl introspect xyz.openbmc_project.Smbios.MDR_V2 \
+ /xyz/openbmc_project/inventory/system/chassis/motherboard/bios | grep Version | awk '{print $4}')
+ echo " Bios: $cmd"
+ fi
+
+ adm1266_ver | grep REVISION
+
+}
+
+function uartmux() {
+ case $1 in
+ host)
+ if [ "$(tty)" == "/dev/ttyS0" ]; then
+ echo "Couldn't redirect to the host console within BMC local console"
+ else
+ echo "Entering Console use 'shift ~~..' to quit"
+ obmc-console-client -c /etc/obmc-console/server.ttyS1.conf
+ fi
+ ;;
+ mpro)
+ if [ "$(tty)" == "/dev/ttyS0" ]; then
+ echo "Couldn't redirect to the Mpro console within BMC local console"
+ else
+ echo "Entering Console use 'shift ~~..' to quit"
+ obmc-console-client -c /etc/obmc-console/server.ttyS3.conf
+ fi
+ ;;
+ swhost)
+ set_gpio_ctrl S0_UART0_BMC_SEL 1
+ ;;
+ swmpro)
+ set_gpio_ctrl S0_UART1_BMC_SEL 1
+ ;;
+ swhosthr)
+ set_gpio_ctrl S0_UART0_BMC_SEL 0
+ ;;
+ swmprohr)
+ set_gpio_ctrl S0_UART1_BMC_SEL 0
+ ;;
+ display)
+ if [ "$(get_gpio_ctrl S0_UART0_BMC_SEL)" -eq 1 ]; then
+ echo " CPU host to BMC console"
+ else
+ echo " CPU host to header"
+ fi
+
+ if [ "$(get_gpio_ctrl S0_UART1_BMC_SEL)" -eq 1 ]; then
+ echo " Mpro host to BMC console"
+ else
+ echo " Mpro host to header"
+ fi
+ ;;
+ *)
+ usage_uart
+ ;;
+ esac
+}
+
+function ledtoggle() {
+ case $1 in
+ boot)
+ cmd=$(get_gpio_ctrl SYS_BOOT_STATUS_LED)
+ case $2 in
+ on)
+ #turn on LED
+ set_gpio_ctrl SYS_BOOT_STATUS_LED 1
+ ;;
+ off)
+ #turn off LED
+ set_gpio_ctrl SYS_BOOT_STATUS_LED 0
+ ;;
+ toggle)
+ #toggle off LED
+ if [[ $cmd -eq 1 ]]; then
+ set_gpio_ctrl SYS_BOOT_STATUS_LED 0
+ fi
+
+ #toggle on LED
+ if [[ $cmd -eq 0 ]]; then
+ set_gpio_ctrl SYS_BOOT_STATUS_LED 1
+ fi
+ ;;
+ status)
+ #displayLED status
+ if [[ $cmd -eq 1 ]]; then
+ echo "on"
+ else
+ echo "off"
+ fi
+ ;;
+ *)
+ usage_led
+ ;;
+ esac
+ ;;
+ attn)
+ cmd=$(get_gpio_ctrl SYS_ERROR_LED)
+ case $2 in
+ on)
+ #turn on LED
+ set_gpio_ctrl SYS_ERROR_LED 1
+ ;;
+ off)
+ #turn off LED
+ set_gpio_ctrl SYS_ERROR_LED 0
+ ;;
+ toggle)
+ #toggle off LED
+ if [[ $cmd -eq 1 ]]; then
+ set_gpio_ctrl SYS_ERROR_LED 0
+ fi
+
+ #toggle on LED
+ if [[ $cmd -eq 0 ]]; then
+ set_gpio_ctrl SYS_ERROR_LED 1
+ fi
+ ;;
+ status)
+ #displayLED status
+ if [[ $cmd -eq 1 ]]; then
+ echo "on"
+ else
+ echo "off"
+ fi
+ ;;
+ *)
+ usage_led
+ ;;
+ esac
+ ;;
+ *)
+ usage_led
+ ;;
+ esac
+}
+
+case $1 in
+ rst)
+ reset "$2"
+ ;;
+ fw)
+ fw_rev
+ ;;
+ uart)
+ uartmux "$2"
+ ;;
+ led)
+ ledtoggle "$2" "$3"
+ ;;
+ *)
+ usage
+ ;;
+esac
+
diff --git a/meta-fii/meta-mori/recipes-phosphor/image/obmc-phosphor-image.bbappend b/meta-fii/meta-mori/recipes-phosphor/image/obmc-phosphor-image.bbappend
index 6eda748..80eae00 100644
--- a/meta-fii/meta-mori/recipes-phosphor/image/obmc-phosphor-image.bbappend
+++ b/meta-fii/meta-mori/recipes-phosphor/image/obmc-phosphor-image.bbappend
@@ -33,6 +33,8 @@
OBMC_IMAGE_EXTRA_INSTALL:append:mori = " estoraged"
OBMC_IMAGE_EXTRA_INSTALL:append:mori = " phosphor-pid-control"
OBMC_IMAGE_EXTRA_INSTALL:append:mori = " phosphor-logging"
+OBMC_IMAGE_EXTRA_INSTALL:append:mori = " mori-cmd"
+OBMC_IMAGE_EXTRA_INSTALL:append:mori = " mori-boot"
OBMC_IMAGE_EXTRA_INSTALL:append:mori = " mori-fw"
# Required for phosphor-ipmi-ssif