meta-raspberrypi: subtree update:cee2557dc8..4776ecc532
Patrick Vacek (1):
u-boot: drop patches for RPi4 merged upstream.
Change-Id: I5052363708a20c7a25ac0b2fb0712bc3dbf02fba
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
diff --git a/meta-raspberrypi/recipes-bsp/u-boot/u-boot-2019.07/0001-configs-rpi4-Add-defconfigs-for-rpi4-32-64.patch b/meta-raspberrypi/recipes-bsp/u-boot/u-boot-2019.07/0001-configs-rpi4-Add-defconfigs-for-rpi4-32-64.patch
deleted file mode 100644
index 391b26a..0000000
--- a/meta-raspberrypi/recipes-bsp/u-boot/u-boot-2019.07/0001-configs-rpi4-Add-defconfigs-for-rpi4-32-64.patch
+++ /dev/null
@@ -1,104 +0,0 @@
-From 5bf85d04b440ce874310e701abded823dc1864bc Mon Sep 17 00:00:00 2001
-From: Andrei Gherzan <andrei@balena.io>
-Date: Wed, 17 Jul 2019 15:32:11 +0100
-Subject: [PATCH 1/7] configs: rpi4: Add defconfigs for rpi4 (32/64)
-
-This defines a minimum defconfig for each of the two Raspberry Pi 4
-variants. One notable difference is that we don't have a embedded dt for
-this board given that the fw supplies us with one which we can reuse.
-Furthermore, the ram size is not queryable through mbox interface as the
-maximum reported size is 1G. The fw patches the dt with the right
-memory configuration and uboot uses it as it is. We avoid u-boot
-touching this configuration by making sure CONFIG_ARCH_FIXUP_FDT_MEMORY
-is deactivated.
-
-Signed-off-by: Andrei Gherzan <andrei@balena.io>
-Upstream-status: Pending
----
- configs/rpi_4_32b_defconfig | 33 +++++++++++++++++++++++++++++++++
- configs/rpi_4_defconfig | 33 +++++++++++++++++++++++++++++++++
- 2 files changed, 66 insertions(+)
- create mode 100644 configs/rpi_4_32b_defconfig
- create mode 100644 configs/rpi_4_defconfig
-
-diff --git a/configs/rpi_4_32b_defconfig b/configs/rpi_4_32b_defconfig
-new file mode 100644
-index 0000000000..a31a617a5f
---- /dev/null
-+++ b/configs/rpi_4_32b_defconfig
-@@ -0,0 +1,33 @@
-+CONFIG_ARM=y
-+CONFIG_ARCH_BCM283X=y
-+CONFIG_SYS_TEXT_BASE=0x00008000
-+CONFIG_TARGET_RPI_4_32B=y
-+CONFIG_SYS_MALLOC_F_LEN=0x2000
-+CONFIG_DISTRO_DEFAULTS=y
-+CONFIG_NR_DRAM_BANKS=1
-+# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
-+CONFIG_OF_BOARD=y
-+CONFIG_OF_BOARD_SETUP=y
-+CONFIG_MISC_INIT_R=y
-+# CONFIG_DISPLAY_CPUINFO is not set
-+# CONFIG_DISPLAY_BOARDINFO is not set
-+CONFIG_SYS_PROMPT="U-Boot> "
-+# CONFIG_CMD_FLASH is not set
-+CONFIG_CMD_GPIO=y
-+CONFIG_CMD_MMC=y
-+CONFIG_CMD_FS_UUID=y
-+CONFIG_ENV_FAT_INTERFACE="mmc"
-+CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
-+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
-+CONFIG_DM_KEYBOARD=y
-+CONFIG_DM_MMC=y
-+CONFIG_MMC_SDHCI=y
-+CONFIG_MMC_SDHCI_BCM2835=y
-+CONFIG_PINCTRL=y
-+# CONFIG_PINCTRL_GENERIC is not set
-+# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
-+CONFIG_DM_VIDEO=y
-+CONFIG_SYS_WHITE_ON_BLACK=y
-+CONFIG_CONSOLE_SCROLL_LINES=10
-+CONFIG_PHYS_TO_BUS=y
-+CONFIG_OF_LIBFDT_OVERLAY=y
-diff --git a/configs/rpi_4_defconfig b/configs/rpi_4_defconfig
-new file mode 100644
-index 0000000000..da8c960a2a
---- /dev/null
-+++ b/configs/rpi_4_defconfig
-@@ -0,0 +1,33 @@
-+CONFIG_ARM=y
-+CONFIG_ARCH_BCM283X=y
-+CONFIG_SYS_TEXT_BASE=0x00080000
-+CONFIG_TARGET_RPI_4=y
-+CONFIG_SYS_MALLOC_F_LEN=0x2000
-+CONFIG_DISTRO_DEFAULTS=y
-+CONFIG_NR_DRAM_BANKS=1
-+# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
-+CONFIG_OF_BOARD=y
-+CONFIG_OF_BOARD_SETUP=y
-+CONFIG_MISC_INIT_R=y
-+# CONFIG_DISPLAY_CPUINFO is not set
-+# CONFIG_DISPLAY_BOARDINFO is not set
-+CONFIG_SYS_PROMPT="U-Boot> "
-+# CONFIG_CMD_FLASH is not set
-+CONFIG_CMD_GPIO=y
-+CONFIG_CMD_MMC=y
-+CONFIG_CMD_FS_UUID=y
-+CONFIG_ENV_FAT_INTERFACE="mmc"
-+CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
-+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
-+CONFIG_DM_KEYBOARD=y
-+CONFIG_DM_MMC=y
-+CONFIG_MMC_SDHCI=y
-+CONFIG_MMC_SDHCI_BCM2835=y
-+CONFIG_PINCTRL=y
-+# CONFIG_PINCTRL_GENERIC is not set
-+# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
-+CONFIG_DM_VIDEO=y
-+CONFIG_SYS_WHITE_ON_BLACK=y
-+CONFIG_CONSOLE_SCROLL_LINES=10
-+CONFIG_PHYS_TO_BUS=y
-+CONFIG_OF_LIBFDT_OVERLAY=y
---
-2.22.0
-
diff --git a/meta-raspberrypi/recipes-bsp/u-boot/u-boot-2019.07/0002-ARM-bcm283x-Add-BCM283x_BASE-define.patch b/meta-raspberrypi/recipes-bsp/u-boot/u-boot-2019.07/0002-ARM-bcm283x-Add-BCM283x_BASE-define.patch
deleted file mode 100644
index fcf91a6..0000000
--- a/meta-raspberrypi/recipes-bsp/u-boot/u-boot-2019.07/0002-ARM-bcm283x-Add-BCM283x_BASE-define.patch
+++ /dev/null
@@ -1,105 +0,0 @@
-From df2aa4c6be33b468adc09de337a055556d1f37fb Mon Sep 17 00:00:00 2001
-From: Matthias Brugger <mbrugger@suse.com>
-Date: Fri, 12 Jul 2019 18:20:53 +0200
-Subject: [PATCH 2/7] ARM: bcm283x: Add BCM283x_BASE define
-
-Devices of bcm283x have different base address, depending if they are on
-bcm2835 or bcm2836/7. Use BCM283x_BASE depending on the SoC you want to
-build and only add the offset in the header files.
-
-Signed-off-by: Matthias Brugger <mbrugger@suse.com>
-Signed-off-by: Andrei Gherzan <andrei@balena.io>
-Upstream-status: Pending
----
- arch/arm/mach-bcm283x/Kconfig | 5 +++++
- arch/arm/mach-bcm283x/include/mach/mbox.h | 6 +-----
- arch/arm/mach-bcm283x/include/mach/sdhci.h | 6 +-----
- arch/arm/mach-bcm283x/include/mach/timer.h | 6 +-----
- arch/arm/mach-bcm283x/include/mach/wdog.h | 6 +-----
- 5 files changed, 9 insertions(+), 20 deletions(-)
-
-diff --git a/arch/arm/mach-bcm283x/Kconfig b/arch/arm/mach-bcm283x/Kconfig
-index 3eb5a9a897..8e69914a83 100644
---- a/arch/arm/mach-bcm283x/Kconfig
-+++ b/arch/arm/mach-bcm283x/Kconfig
-@@ -141,4 +141,9 @@ config SYS_SOC
- config SYS_CONFIG_NAME
- default "rpi"
-
-+config BCM283x_BASE
-+ hex
-+ default "0x20000000" if BCM2835
-+ default "0x3f000000" if BCM2836 || BCM2837
-+
- endmenu
-diff --git a/arch/arm/mach-bcm283x/include/mach/mbox.h b/arch/arm/mach-bcm283x/include/mach/mbox.h
-index e3a893e49c..e44c7577da 100644
---- a/arch/arm/mach-bcm283x/include/mach/mbox.h
-+++ b/arch/arm/mach-bcm283x/include/mach/mbox.h
-@@ -37,11 +37,7 @@
-
- /* Raw mailbox HW */
-
--#ifndef CONFIG_BCM2835
--#define BCM2835_MBOX_PHYSADDR 0x3f00b880
--#else
--#define BCM2835_MBOX_PHYSADDR 0x2000b880
--#endif
-+#define BCM2835_MBOX_PHYSADDR (CONFIG_BCM283x_BASE + 0x0000b880)
-
- struct bcm2835_mbox_regs {
- u32 read;
-diff --git a/arch/arm/mach-bcm283x/include/mach/sdhci.h b/arch/arm/mach-bcm283x/include/mach/sdhci.h
-index 5cb6ec3340..b443c379d8 100644
---- a/arch/arm/mach-bcm283x/include/mach/sdhci.h
-+++ b/arch/arm/mach-bcm283x/include/mach/sdhci.h
-@@ -6,11 +6,7 @@
- #ifndef _BCM2835_SDHCI_H_
- #define _BCM2835_SDHCI_H_
-
--#ifndef CONFIG_BCM2835
--#define BCM2835_SDHCI_BASE 0x3f300000
--#else
--#define BCM2835_SDHCI_BASE 0x20300000
--#endif
-+#define BCM2835_SDHCI_BASE (CONFIG_BCM283x_BASE + 0x00300000)
-
- int bcm2835_sdhci_init(u32 regbase, u32 emmc_freq);
-
-diff --git a/arch/arm/mach-bcm283x/include/mach/timer.h b/arch/arm/mach-bcm283x/include/mach/timer.h
-index 56b0c356bb..014355e759 100644
---- a/arch/arm/mach-bcm283x/include/mach/timer.h
-+++ b/arch/arm/mach-bcm283x/include/mach/timer.h
-@@ -6,11 +6,7 @@
- #ifndef _BCM2835_TIMER_H
- #define _BCM2835_TIMER_H
-
--#ifndef CONFIG_BCM2835
--#define BCM2835_TIMER_PHYSADDR 0x3f003000
--#else
--#define BCM2835_TIMER_PHYSADDR 0x20003000
--#endif
-+#define BCM2835_TIMER_PHYSADDR (CONFIG_BCM283x_BASE + 0x00003000)
-
- #define BCM2835_TIMER_CS_M3 (1 << 3)
- #define BCM2835_TIMER_CS_M2 (1 << 2)
-diff --git a/arch/arm/mach-bcm283x/include/mach/wdog.h b/arch/arm/mach-bcm283x/include/mach/wdog.h
-index 99c88e5df7..00b5e06c3a 100644
---- a/arch/arm/mach-bcm283x/include/mach/wdog.h
-+++ b/arch/arm/mach-bcm283x/include/mach/wdog.h
-@@ -6,11 +6,7 @@
- #ifndef _BCM2835_WDOG_H
- #define _BCM2835_WDOG_H
-
--#ifndef CONFIG_BCM2835
--#define BCM2835_WDOG_PHYSADDR 0x3f100000
--#else
--#define BCM2835_WDOG_PHYSADDR 0x20100000
--#endif
-+#define BCM2835_WDOG_PHYSADDR (CONFIG_BCM283x_BASE + 0x00100000)
-
- struct bcm2835_wdog_regs {
- u32 unknown0[7];
---
-2.22.0
-
diff --git a/meta-raspberrypi/recipes-bsp/u-boot/u-boot-2019.07/0003-arm-mach-bcm283x-Define-configs-for-RaspberryPi-4.patch b/meta-raspberrypi/recipes-bsp/u-boot/u-boot-2019.07/0003-arm-mach-bcm283x-Define-configs-for-RaspberryPi-4.patch
deleted file mode 100644
index 029cac4..0000000
--- a/meta-raspberrypi/recipes-bsp/u-boot/u-boot-2019.07/0003-arm-mach-bcm283x-Define-configs-for-RaspberryPi-4.patch
+++ /dev/null
@@ -1,108 +0,0 @@
-From c03f551cab8fe38de8f0e1781f0e2e339419b003 Mon Sep 17 00:00:00 2001
-From: Andrei Gherzan <andrei@balena.io>
-Date: Wed, 17 Jul 2019 15:33:01 +0100
-Subject: [PATCH 3/7] arm: mach-bcm283x: Define configs for RaspberryPi 4
-
-Define two target configs for Raspberry Pi 4 (32 and 64bit) and the
-corresponding BCM2838* configs.
-
-Be aware of the current limitation in firmware which requires an
-explicit configuration to force the arm in 64bit mode when the
-respective target is used.
-
-Signed-off-by: Andrei Gherzan <andrei@balena.io>
-Signed-off-by: Matthias Brugger <mbrugger@suse.com>
-Upstream-status: Pending
----
- arch/arm/mach-bcm283x/Kconfig | 62 +++++++++++++++++++++++++++++++++++
- 1 file changed, 62 insertions(+)
-
-diff --git a/arch/arm/mach-bcm283x/Kconfig b/arch/arm/mach-bcm283x/Kconfig
-index 8e69914a83..09a5b42bbb 100644
---- a/arch/arm/mach-bcm283x/Kconfig
-+++ b/arch/arm/mach-bcm283x/Kconfig
-@@ -26,6 +26,23 @@ config BCM2837_64B
- select BCM2837
- select ARM64
-
-+config BCM2838
-+ bool "Broadcom BCM2838 SoC support"
-+ depends on ARCH_BCM283X
-+
-+config BCM2838_32B
-+ bool "Broadcom BCM2838 SoC 32-bit support"
-+ depends on ARCH_BCM283X
-+ select BCM2838
-+ select ARMV7_LPAE
-+ select CPU_V7A
-+
-+config BCM2838_64B
-+ bool "Broadcom BCM2838 SoC 64-bit support"
-+ depends on ARCH_BCM283X
-+ select BCM2838
-+ select ARM64
-+
- menu "Broadcom BCM283X family"
- depends on ARCH_BCM283X
-
-@@ -127,6 +144,50 @@ config TARGET_RPI_3
- This option creates a build targeting the ARMv8/AArch64 ISA.
- select BCM2837_64B
-
-+config TARGET_RPI_4_32B
-+ bool "Raspberry Pi 4 32-bit build"
-+ help
-+ Support for all BCM2838-based Raspberry Pi variants, such as
-+ the RPi 4 model B, in AArch32 (32-bit) mode.
-+
-+ This option assumes the VideoCore firmware is configured to use the
-+ mini UART (rather than PL011) for the serial console. This is the
-+ default on the RPi 4. To enable the UART console, the following non-
-+ default option must be present in config.txt: enable_uart=1. This is
-+ required for U-Boot to operate correctly, even if you only care
-+ about the HDMI/usbkbd console.
-+
-+ Due to hardware incompatibilities, this can't be used with
-+ BCM283/5/6/7.
-+
-+ This option creates a build targeting the ARMv7/AArch32 ISA.
-+ select BCM2838_32B
-+
-+config TARGET_RPI_4
-+ bool "Raspberry Pi 4 64-bit build"
-+ help
-+ Support for all BCM2838-based Raspberry Pi variants, such as
-+ the RPi 4 model B, in AArch64 (64-bit) mode.
-+
-+ This option assumes the VideoCore firmware is configured to use the
-+ mini UART (rather than PL011) for the serial console. This is the
-+ default on the RPi 4. To enable the UART console, the following non-
-+ default option must be present in config.txt: enable_uart=1. This is
-+ required for U-Boot to operate correctly, even if you only care
-+ about the HDMI/usbkbd console.
-+
-+ Due to hardware incompatibilities, this can't be used with
-+ BCM283/5/6/7.
-+
-+ Also, due to a bug in firmware, switching to 64bit mode doesn't
-+ happen automatically based on the kernel's image filename. See
-+ https://github.com/raspberrypi/firmware/issues/1193 for more details.
-+ Until that is resolved, the configuration (config.txt) needs to
-+ explicitly set: arm_64bit=1.
-+
-+ This option creates a build targeting the ARMv8/AArch64 ISA.
-+ select BCM2838_64B
-+
- endchoice
-
- config SYS_BOARD
-@@ -145,5 +206,6 @@ config BCM283x_BASE
- hex
- default "0x20000000" if BCM2835
- default "0x3f000000" if BCM2836 || BCM2837
-+ default "0xfe000000" if BCM2838
-
- endmenu
---
-2.22.0
-
diff --git a/meta-raspberrypi/recipes-bsp/u-boot/u-boot-2019.07/0004-rpi-Add-entry-for-Raspberry-Pi-4-model-B.patch b/meta-raspberrypi/recipes-bsp/u-boot/u-boot-2019.07/0004-rpi-Add-entry-for-Raspberry-Pi-4-model-B.patch
deleted file mode 100644
index 7309d2b..0000000
--- a/meta-raspberrypi/recipes-bsp/u-boot/u-boot-2019.07/0004-rpi-Add-entry-for-Raspberry-Pi-4-model-B.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 12fbbd5bc12e225b19d3b4cb193a1bf3d9fa752a Mon Sep 17 00:00:00 2001
-From: Andrei Gherzan <andrei@balena.io>
-Date: Wed, 17 Jul 2019 15:34:18 +0100
-Subject: [PATCH 4/7] rpi: Add entry for Raspberry Pi 4 model B
-
-The Raspebrry Pi 4 uses the new revision code scheme as documented by
-the foundation. This change adds an entry for this board as well.
-
-Signed-off-by: Andrei Gherzan <andrei@balena.io>
-Upstream-status: Pending
----
- board/raspberrypi/rpi/rpi.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
-diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
-index 617c892dde..92c6534da6 100644
---- a/board/raspberrypi/rpi/rpi.c
-+++ b/board/raspberrypi/rpi/rpi.c
-@@ -148,6 +148,11 @@ static const struct rpi_model rpi_models_new_scheme[] = {
- DTB_DIR "bcm2837-rpi-cm3.dtb",
- false,
- },
-+ [0x11] = {
-+ "4 Model B",
-+ DTB_DIR "bcm2838-rpi-4-b.dtb",
-+ true,
-+ },
- };
-
- static const struct rpi_model rpi_models_old_scheme[] = {
---
-2.22.0
-
diff --git a/meta-raspberrypi/recipes-bsp/u-boot/u-boot-2019.07/0005-arm-bcm283x-Include-definition-for-additional-emmc-c.patch b/meta-raspberrypi/recipes-bsp/u-boot/u-boot-2019.07/0005-arm-bcm283x-Include-definition-for-additional-emmc-c.patch
deleted file mode 100644
index 44847e0..0000000
--- a/meta-raspberrypi/recipes-bsp/u-boot/u-boot-2019.07/0005-arm-bcm283x-Include-definition-for-additional-emmc-c.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From fd99a249e6faf234066a6b5da2ed34aaead3d6d9 Mon Sep 17 00:00:00 2001
-From: Andrei Gherzan <andrei@balena.io>
-Date: Fri, 12 Jul 2019 11:26:10 +0100
-Subject: [PATCH 5/7] arm: bcm283x: Include definition for additional emmc
- clock
-
-This clock has a different mbox ID so have this included in the relevant
-header file.
-
-Signed-off-by: Andrei Gherzan <andrei@balena.io>
-Upstream-status: Pending
----
- arch/arm/mach-bcm283x/include/mach/mbox.h | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/arch/arm/mach-bcm283x/include/mach/mbox.h b/arch/arm/mach-bcm283x/include/mach/mbox.h
-index e44c7577da..f2a98acddd 100644
---- a/arch/arm/mach-bcm283x/include/mach/mbox.h
-+++ b/arch/arm/mach-bcm283x/include/mach/mbox.h
-@@ -230,6 +230,7 @@ struct bcm2835_mbox_tag_set_power_state {
- #define BCM2835_MBOX_CLOCK_ID_SDRAM 8
- #define BCM2835_MBOX_CLOCK_ID_PIXEL 9
- #define BCM2835_MBOX_CLOCK_ID_PWM 10
-+#define BCM2835_MBOX_CLOCK_ID_EMMC2 12
-
- struct bcm2835_mbox_tag_get_clock_rate {
- struct bcm2835_mbox_tag_hdr tag_hdr;
---
-2.22.0
-
diff --git a/meta-raspberrypi/recipes-bsp/u-boot/u-boot-2019.07/0006-mmc-bcm2835_sdhci-Add-support-for-bcm2711-device.patch b/meta-raspberrypi/recipes-bsp/u-boot/u-boot-2019.07/0006-mmc-bcm2835_sdhci-Add-support-for-bcm2711-device.patch
deleted file mode 100644
index d9de5c4..0000000
--- a/meta-raspberrypi/recipes-bsp/u-boot/u-boot-2019.07/0006-mmc-bcm2835_sdhci-Add-support-for-bcm2711-device.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From 1f42758fe69648340cfae6cae98e667b88923cf6 Mon Sep 17 00:00:00 2001
-From: Matthias Brugger <mbrugger@suse.com>
-Date: Wed, 10 Jul 2019 13:24:36 +0200
-Subject: [PATCH 6/7] mmc: bcm2835_sdhci: Add support for bcm2711 device
-
-The bcm2711 has two emmc controller. The difference is the clocks
-they use. Add support for the second emmc contoller.
-
-Signed-off-by: Matthias Brugger <mbrugger@suse.com>
-Signed-off-by: Andrei Gherzan <andrei@balena.io>
-Upstream-status: Pending
----
- drivers/mmc/bcm2835_sdhci.c | 12 ++++++++++--
- 1 file changed, 10 insertions(+), 2 deletions(-)
-
-diff --git a/drivers/mmc/bcm2835_sdhci.c b/drivers/mmc/bcm2835_sdhci.c
-index 08bddd410e..e68dec3be7 100644
---- a/drivers/mmc/bcm2835_sdhci.c
-+++ b/drivers/mmc/bcm2835_sdhci.c
-@@ -178,12 +178,13 @@ static int bcm2835_sdhci_probe(struct udevice *dev)
- fdt_addr_t base;
- int emmc_freq;
- int ret;
-+ int clock_id = (int)dev_get_driver_data(dev);
-
- base = devfdt_get_addr(dev);
- if (base == FDT_ADDR_T_NONE)
- return -EINVAL;
-
-- ret = bcm2835_get_mmc_clock(BCM2835_MBOX_CLOCK_ID_EMMC);
-+ ret = bcm2835_get_mmc_clock(clock_id);
- if (ret < 0) {
- debug("%s: Failed to set MMC clock (err=%d)\n", __func__, ret);
- return ret;
-@@ -228,7 +229,14 @@ static int bcm2835_sdhci_probe(struct udevice *dev)
- }
-
- static const struct udevice_id bcm2835_sdhci_match[] = {
-- { .compatible = "brcm,bcm2835-sdhci" },
-+ {
-+ .compatible = "brcm,bcm2835-sdhci",
-+ .data = BCM2835_MBOX_CLOCK_ID_EMMC
-+ },
-+ {
-+ .compatible = "brcm,bcm2711-emmc2",
-+ .data = BCM2835_MBOX_CLOCK_ID_EMMC2
-+ },
- { /* sentinel */ }
- };
-
---
-2.22.0
-
diff --git a/meta-raspberrypi/recipes-bsp/u-boot/u-boot-2019.07/0007-rpi-Add-memory-map-for-bcm2838.patch b/meta-raspberrypi/recipes-bsp/u-boot/u-boot-2019.07/0007-rpi-Add-memory-map-for-bcm2838.patch
deleted file mode 100644
index 1d23d9f..0000000
--- a/meta-raspberrypi/recipes-bsp/u-boot/u-boot-2019.07/0007-rpi-Add-memory-map-for-bcm2838.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From 76b656349a6786fa81cf69ac7762c31675cd567e Mon Sep 17 00:00:00 2001
-From: Andrei Gherzan <andrei@balena.io>
-Date: Fri, 12 Jul 2019 14:27:31 +0100
-Subject: [PATCH 7/7] rpi: Add memory map for bcm2838
-
-Define the memory map for the BCM2838 based on the dt configuration
-available in the Raspberry Pi kernel fork.
-
-Signed-off-by: Andrei Gherzan <andrei@balena.io>
-Upstream-status: Pending
----
- board/raspberrypi/rpi/rpi.c | 27 ++++++++++++++++++++++++---
- 1 file changed, 24 insertions(+), 3 deletions(-)
-
-diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
-index 92c6534da6..bddf2a578d 100644
---- a/board/raspberrypi/rpi/rpi.c
-+++ b/board/raspberrypi/rpi/rpi.c
-@@ -249,7 +249,8 @@ static uint32_t rev_type;
- static const struct rpi_model *model;
-
- #ifdef CONFIG_ARM64
--static struct mm_region bcm2837_mem_map[] = {
-+#ifndef CONFIG_BCM2838
-+static struct mm_region bcm283x_mem_map[] = {
- {
- .virt = 0x00000000UL,
- .phys = 0x00000000UL,
-@@ -268,8 +269,28 @@ static struct mm_region bcm2837_mem_map[] = {
- 0,
- }
- };
--
--struct mm_region *mem_map = bcm2837_mem_map;
-+#else
-+static struct mm_region bcm283x_mem_map[] = {
-+ {
-+ .virt = 0x00000000UL,
-+ .phys = 0x00000000UL,
-+ .size = 0xfe000000UL,
-+ .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
-+ PTE_BLOCK_INNER_SHARE
-+ }, {
-+ .virt = 0xfe000000UL,
-+ .phys = 0xfe000000UL,
-+ .size = 0x01800000UL,
-+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
-+ PTE_BLOCK_NON_SHARE |
-+ PTE_BLOCK_PXN | PTE_BLOCK_UXN
-+ }, {
-+ /* List terminator */
-+ 0,
-+ }
-+};
-+#endif
-+struct mm_region *mem_map = bcm283x_mem_map;
- #endif
-
- int dram_init(void)
---
-2.22.0
-
diff --git a/meta-raspberrypi/recipes-bsp/u-boot/u-boot-fw-utils_2019.07.bbappend b/meta-raspberrypi/recipes-bsp/u-boot/u-boot-fw-utils_2019.07.bbappend
deleted file mode 100644
index 3daf157..0000000
--- a/meta-raspberrypi/recipes-bsp/u-boot/u-boot-fw-utils_2019.07.bbappend
+++ /dev/null
@@ -1,2 +0,0 @@
-# Apply the same patches for rpi4 as u-boot recipe
-require u-boot-rpi4-${PV}.inc
diff --git a/meta-raspberrypi/recipes-bsp/u-boot/u-boot-rpi4-2019.07.inc b/meta-raspberrypi/recipes-bsp/u-boot/u-boot-rpi4-2019.07.inc
deleted file mode 100644
index 2ce55a2..0000000
--- a/meta-raspberrypi/recipes-bsp/u-boot/u-boot-rpi4-2019.07.inc
+++ /dev/null
@@ -1,12 +0,0 @@
-FILESEXTRAPATHS_prepend_raspberrypi4 := "${THISDIR}/u-boot-2019.07:"
-UBOOT_RPI4_SUPPORT_PATCHES = " \
- file://0001-configs-rpi4-Add-defconfigs-for-rpi4-32-64.patch \
- file://0002-ARM-bcm283x-Add-BCM283x_BASE-define.patch \
- file://0003-arm-mach-bcm283x-Define-configs-for-RaspberryPi-4.patch \
- file://0004-rpi-Add-entry-for-Raspberry-Pi-4-model-B.patch \
- file://0005-arm-bcm283x-Include-definition-for-additional-emmc-c.patch \
- file://0006-mmc-bcm2835_sdhci-Add-support-for-bcm2711-device.patch \
- file://0007-rpi-Add-memory-map-for-bcm2838.patch \
-"
-
-SRC_URI_append_raspberrypi4 = "${UBOOT_RPI4_SUPPORT_PATCHES}"
diff --git a/meta-raspberrypi/recipes-bsp/u-boot/u-boot_2019.07.bbappend b/meta-raspberrypi/recipes-bsp/u-boot/u-boot_2019.07.bbappend
deleted file mode 100644
index 3daf157..0000000
--- a/meta-raspberrypi/recipes-bsp/u-boot/u-boot_2019.07.bbappend
+++ /dev/null
@@ -1,2 +0,0 @@
-# Apply the same patches for rpi4 as u-boot recipe
-require u-boot-rpi4-${PV}.inc