| inherit image_types |
| |
| # |
| # Create an image that can be written onto a SD card using dd. |
| # |
| # The disk layout used is: |
| # |
| # 0 -> IMAGE_ROOTFS_ALIGNMENT - reserved for other data |
| # IMAGE_ROOTFS_ALIGNMENT -> BOOT_SPACE - bootloader and kernel |
| # BOOT_SPACE -> SDIMG_SIZE - rootfs |
| # |
| |
| # Default Free space = 1.3x |
| # Use IMAGE_OVERHEAD_FACTOR to add more space |
| # <---------> |
| # 4MiB 48MiB SDIMG_ROOTFS |
| # <-----------------------> <----------> <----------------------> |
| # ------------------------ ------------ ------------------------ |
| # | IMAGE_ROOTFS_ALIGNMENT | BOOT_SPACE | ROOTFS_SIZE | |
| # ------------------------ ------------ ------------------------ |
| # ^ ^ ^ ^ |
| # | | | | |
| # 0 4MiB 4MiB + 48MiB 4MiB + 48Mib + SDIMG_ROOTFS |
| |
| # This image depends on the rootfs image |
| IMAGE_TYPEDEP:rpi-sdimg = "${SDIMG_ROOTFS_TYPE}" |
| |
| # Kernel image name |
| SDIMG_KERNELIMAGE:raspberrypi ?= "kernel.img" |
| SDIMG_KERNELIMAGE:raspberrypi2 ?= "kernel7.img" |
| SDIMG_KERNELIMAGE:raspberrypi3-64 ?= "kernel8.img" |
| |
| # Boot partition volume id |
| # Shorten raspberrypi to just rpi to keep it under 11 characters |
| # now enforced by mkfs.vfat from dosfstools-4.2 |
| BOOTDD_VOLUME_ID ?= "${@d.getVar('MACHINE').replace('raspberrypi', 'rpi')}" |
| |
| # Boot partition size [in KiB] (will be rounded up to IMAGE_ROOTFS_ALIGNMENT) |
| BOOT_SPACE ?= "49152" |
| |
| # Set alignment to 4MB [in KiB] |
| IMAGE_ROOTFS_ALIGNMENT = "4096" |
| |
| # Use an uncompressed ext3 by default as rootfs |
| SDIMG_ROOTFS_TYPE ?= "ext3" |
| SDIMG_ROOTFS = "${IMGDEPLOYDIR}/${IMAGE_LINK_NAME}.${SDIMG_ROOTFS_TYPE}" |
| |
| # For the names of kernel artifacts |
| inherit kernel-artifact-names |
| |
| RPI_SDIMG_EXTRA_DEPENDS ?= "" |
| |
| do_image_rpi_sdimg[depends] = " \ |
| parted-native:do_populate_sysroot \ |
| mtools-native:do_populate_sysroot \ |
| dosfstools-native:do_populate_sysroot \ |
| virtual/kernel:do_deploy \ |
| rpi-bootfiles:do_deploy \ |
| ${@bb.utils.contains('MACHINE_FEATURES', 'armstub', 'armstubs:do_deploy', '' ,d)} \ |
| ${@bb.utils.contains('RPI_USE_U_BOOT', '1', 'u-boot:do_deploy', '',d)} \ |
| ${@bb.utils.contains('RPI_USE_U_BOOT', '1', 'u-boot-default-script:do_deploy', '',d)} \ |
| ${RPI_SDIMG_EXTRA_DEPENDS} \ |
| " |
| |
| do_image_rpi_sdimg[recrdeps] = "do_build" |
| |
| # SD card image name |
| SDIMG = "${IMGDEPLOYDIR}/${IMAGE_NAME}${IMAGE_NAME_SUFFIX}.rpi-sdimg" |
| |
| # Additional files and/or directories to be copied into the vfat partition from the IMAGE_ROOTFS. |
| FATPAYLOAD ?= "" |
| |
| # SD card vfat partition image name |
| SDIMG_VFAT_DEPLOY ?= "${RPI_USE_U_BOOT}" |
| SDIMG_VFAT = "${IMAGE_NAME}.vfat" |
| SDIMG_LINK_VFAT = "${IMGDEPLOYDIR}/${IMAGE_LINK_NAME}.vfat" |
| |
| def split_overlays(d, out, ver=None): |
| dts = d.getVar("KERNEL_DEVICETREE") |
| # Device Tree Overlays are assumed to be suffixed by '-overlay.dtb' (4.1.x) or by '.dtbo' (4.4.9+) string and will be put in a dedicated folder |
| if out: |
| overlays = oe.utils.str_filter_out(r'\S+\-overlay\.dtb$', dts, d) |
| overlays = oe.utils.str_filter_out(r'\S+\.dtbo$', overlays, d) |
| else: |
| overlays = oe.utils.str_filter(r'\S+\-overlay\.dtb$', dts, d) + \ |
| " " + oe.utils.str_filter(r'\S+\.dtbo$', dts, d) |
| |
| return overlays |
| |
| IMAGE_CMD:rpi-sdimg () { |
| |
| # Align partitions |
| BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1) |
| BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE_ALIGNED} - ${BOOT_SPACE_ALIGNED} % ${IMAGE_ROOTFS_ALIGNMENT}) |
| SDIMG_SIZE=$(expr ${IMAGE_ROOTFS_ALIGNMENT} + ${BOOT_SPACE_ALIGNED} + $ROOTFS_SIZE) |
| |
| echo "Creating filesystem with Boot partition ${BOOT_SPACE_ALIGNED} KiB and RootFS $ROOTFS_SIZE KiB" |
| |
| # Check if we are building with device tree support |
| DTS="${KERNEL_DEVICETREE}" |
| |
| # Initialize sdcard image file |
| dd if=/dev/zero of=${SDIMG} bs=1024 count=0 seek=${SDIMG_SIZE} |
| |
| # Create partition table |
| parted -s ${SDIMG} mklabel msdos |
| # Create boot partition and mark it as bootable |
| parted -s ${SDIMG} unit KiB mkpart primary fat32 ${IMAGE_ROOTFS_ALIGNMENT} $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT}) |
| parted -s ${SDIMG} set 1 boot on |
| # Create rootfs partition to the end of disk |
| parted -s ${SDIMG} -- unit KiB mkpart primary ext2 $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT}) -1s |
| parted ${SDIMG} print |
| |
| # Create a vfat image with boot files |
| BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDIMG} unit b print | awk '/ 1 / { print substr($4, 1, length($4 -1)) / 512 /2 }') |
| rm -f ${WORKDIR}/boot.img |
| mkfs.vfat -F32 -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS |
| mcopy -v -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${BOOTFILES_DIR_NAME}/* ::/ || bbfatal "mcopy cannot copy ${DEPLOY_DIR_IMAGE}/${BOOTFILES_DIR_NAME}/* into boot.img" |
| if [ "${@bb.utils.contains("MACHINE_FEATURES", "armstub", "1", "0", d)}" = "1" ]; then |
| mcopy -v -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/armstubs/${ARMSTUB} ::/ || bbfatal "mcopy cannot copy ${DEPLOY_DIR_IMAGE}/armstubs/${ARMSTUB} into boot.img" |
| fi |
| if test -n "${DTS}"; then |
| # Copy board device trees to root folder |
| for dtbf in ${@split_overlays(d, True)}; do |
| dtb=`basename $dtbf` |
| mcopy -v -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/$dtb ::$dtb || bbfatal "mcopy cannot copy ${DEPLOY_DIR_IMAGE}/$dtb into boot.img" |
| done |
| |
| # Copy device tree overlays to dedicated folder |
| mmd -i ${WORKDIR}/boot.img overlays |
| for dtbf in ${@split_overlays(d, False)}; do |
| dtb=`basename $dtbf` |
| mcopy -v -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/$dtb ::overlays/$dtb || bbfatal "mcopy cannot copy ${DEPLOY_DIR_IMAGE}/$dtb into boot.img" |
| done |
| fi |
| if [ "${RPI_USE_U_BOOT}" = "1" ]; then |
| mcopy -v -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/u-boot.bin ::${SDIMG_KERNELIMAGE} || bbfatal "mcopy cannot copy ${DEPLOY_DIR_IMAGE}/u-boot.bin into boot.img" |
| mcopy -v -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/boot.scr ::boot.scr || bbfatal "mcopy cannot copy ${DEPLOY_DIR_IMAGE}/boot.scr into boot.img" |
| if [ ! -z "${INITRAMFS_IMAGE}" -a "${INITRAMFS_IMAGE_BUNDLE}" = "1" ]; then |
| mcopy -v -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${INITRAMFS_LINK_NAME}.bin ::${KERNEL_IMAGETYPE} || bbfatal "mcopy cannot copy ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${INITRAMFS_LINK_NAME}.bin into boot.img" |
| else |
| mcopy -v -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE} ::${KERNEL_IMAGETYPE} || bbfatal "mcopy cannot copy ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE} into boot.img" |
| fi |
| else |
| if [ ! -z "${INITRAMFS_IMAGE}" -a "${INITRAMFS_IMAGE_BUNDLE}" = "1" ]; then |
| mcopy -v -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${INITRAMFS_LINK_NAME}.bin ::${SDIMG_KERNELIMAGE} || bbfatal "mcopy cannot copy ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${INITRAMFS_LINK_NAME}.bin into boot.img" |
| else |
| mcopy -v -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE} ::${SDIMG_KERNELIMAGE} || bbfatal "mcopy cannot copy ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE} into boot.img" |
| fi |
| fi |
| |
| # Add files (eg. hypervisor binaries) from the deploy dir |
| if [ -n "${DEPLOYPAYLOAD}" ] ; then |
| echo "Copying deploy file payload into VFAT" |
| for entry in ${DEPLOYPAYLOAD} ; do |
| # Split entry at optional ':' to enable file renaming for the destination |
| if [ $(echo "$entry" | grep -c :) = "0" ] ; then |
| DEPLOY_FILE="$entry" |
| DEST_FILENAME="$entry" |
| else |
| DEPLOY_FILE="$(echo "$entry" | cut -f1 -d:)" |
| DEST_FILENAME="$(echo "$entry" | cut -f2- -d:)" |
| fi |
| mcopy -v -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${DEPLOY_FILE} ::${DEST_FILENAME} || bbfatal "mcopy cannot copy ${DEPLOY_DIR_IMAGE}/${DEPLOY_FILE} into boot.img" |
| done |
| fi |
| |
| if [ -n "${FATPAYLOAD}" ] ; then |
| echo "Copying payload into VFAT" |
| for entry in ${FATPAYLOAD} ; do |
| # use bbwarn instead of bbfatal to stop aborting on vfat issues like not supporting .~lock files |
| mcopy -v -i ${WORKDIR}/boot.img -s ${IMAGE_ROOTFS}$entry :: || bbwarn "mcopy cannot copy ${IMAGE_ROOTFS}$entry into boot.img" |
| done |
| fi |
| |
| # Add stamp file |
| echo "${IMAGE_NAME}" > ${WORKDIR}/image-version-info |
| mcopy -v -i ${WORKDIR}/boot.img ${WORKDIR}/image-version-info :: || bbfatal "mcopy cannot copy ${WORKDIR}/image-version-info into boot.img" |
| |
| # Deploy vfat partition |
| if [ "${SDIMG_VFAT_DEPLOY}" = "1" ]; then |
| cp ${WORKDIR}/boot.img ${IMGDEPLOYDIR}/${SDIMG_VFAT} |
| ln -sf ${SDIMG_VFAT} ${SDIMG_LINK_VFAT} |
| fi |
| |
| # Burn Partitions |
| dd if=${WORKDIR}/boot.img of=${SDIMG} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) |
| # If SDIMG_ROOTFS_TYPE is a .xz file use xzcat |
| if echo "${SDIMG_ROOTFS_TYPE}" | egrep -q "*\.xz" |
| then |
| xzcat ${SDIMG_ROOTFS} | dd of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) |
| else |
| dd if=${SDIMG_ROOTFS} of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) |
| fi |
| } |
| |
| ROOTFS_POSTPROCESS_COMMAND += " rpi_generate_sysctl_config ; " |
| |
| rpi_generate_sysctl_config() { |
| # systemd sysctl config |
| test -d ${IMAGE_ROOTFS}${sysconfdir}/sysctl.d && \ |
| echo "vm.min_free_kbytes = 8192" > ${IMAGE_ROOTFS}${sysconfdir}/sysctl.d/rpi-vm.conf |
| |
| # sysv sysctl config |
| IMAGE_SYSCTL_CONF="${IMAGE_ROOTFS}${sysconfdir}/sysctl.conf" |
| test -e ${IMAGE_ROOTFS}${sysconfdir}/sysctl.conf && \ |
| sed -e "/vm.min_free_kbytes/d" -i ${IMAGE_SYSCTL_CONF} |
| echo "" >> ${IMAGE_SYSCTL_CONF} && echo "vm.min_free_kbytes = 8192" >> ${IMAGE_SYSCTL_CONF} |
| } |