blob: 0f6de8f73f17d5f26aff048eca6fabd64e51ce48 [file] [log] [blame]
#!/bin/bash
# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
[ -n "${ipmi_fru_init-}" ] && return
# shellcheck disable=SC2034
IPMI_FRU_COMMON_HEADER_INTERNAL_OFFSET_IDX=1
# shellcheck disable=SC2034
IPMI_FRU_COMMON_HEADER_CHASSIS_OFFSET_IDX=2
# shellcheck disable=SC2034
IPMI_FRU_COMMON_HEADER_BOARD_OFFSET_IDX=3
# shellcheck disable=SC2034
IPMI_FRU_COMMON_HEADER_PRODUCT_OFFSET_IDX=4
# shellcheck disable=SC2034
IPMI_FRU_COMMON_HEADER_MULTI_RECORD_OFFSET_IDX=5
# shellcheck disable=SC2034
IPMI_FRU_AREA_HEADER_SIZE_IDX=1
# shellcheck disable=SC2034
IPMI_FRU_CHECKSUM_IDX=-1
offset_1bw() {
local addr="$1"
local off="$2"
local extra="${3-0}"
echo "w$((1+extra))@$addr $(( off & 0xff ))"
}
offset_2bw() {
local addr="$1"
local off="$2"
local extra="${3-0}"
echo "w$((2+extra))@$addr $(( (off >> 8) & 0xff )) $(( off & 0xff ))"
}
of_name_to_eeproms() {
local names
if ! names="$(grep -xl "$1" /sys/bus/i2c/devices/*/of_node/name)"; then
echo "Failed to find eeproms with of_name '$1'" >&2
return 1
fi
echo "${names//of_node\/name/eeprom}"
}
of_name_to_eeprom() {
local eeproms
eeproms="$(of_name_to_eeproms "$1")" || return
if (( "$(echo "$eeproms" | wc -l)" != 1 )); then
echo "Got more than one eeprom for '$1': $eeproms" >&2
return 1
fi
echo "$eeproms"
}
# Each element is a `filename`
declare -A IPMI_FRU_EEPROM_FILE=()
# Each element is a `bus` + `addr` + `offset_bytes_func`
declare -A IPMI_FRU_EEPROM_BUSADDR=()
ipmi_fru_device_alloc() {
local fdn="$1"
local idx="$2"
local json
json="$(busctl -j call xyz.openbmc_project.FruDevice \
/xyz/openbmc_project/FruDevice/"$fdn" org.freedesktop.DBus.Properties \
GetAll s xyz.openbmc_project.FruDevice)" || return 80
local jqq='.data[0] | (.BUS.data | tostring) + " " + (.ADDRESS.data | tostring)'
local busaddr
# shellcheck disable=SC2207
busaddr=($(echo "$json" | jq -r "$jqq")) || return
# FRU 0 is hardcoded and FruDevice does not report the correct bus for it
# Hardcode a workaround for this specifically known bus
if (( busaddr[0] == 0 && busaddr[1] == 0 )); then
IPMI_FRU_EEPROM_FILE["$idx"]=/etc/fru/baseboard.fru.bin
else
local offset_bw=offset_2bw
local last=0
local rsp=0x100
local start=$SECONDS
# Query the FRU multiple times to ensure the return value is stabilized
while (( last != rsp )); do
# It shouldn't take > 0.1s to stabilize, limit instability
if (( SECONDS - start >= 10 )); then
echo "Timed out determining offset for ${busaddr[0]}@${busaddr[1]}" >&2
return 1
fi
last=$rsp
# shellcheck disable=SC2046
rsp=$(i2ctransfer -f -y "${busaddr[0]}" $(offset_1bw "${busaddr[1]}" 0) r1) || return
done
# FRUs never start with 0xff bytes, so we can figure out addressing mode
if (( rsp != 0xff )); then
offset_bw=offset_1bw
fi
IPMI_FRU_EEPROM_BUSADDR["$idx"]="${busaddr[*]} $offset_bw"
fi
}
ipmi_fru_alloc() {
local name="$1"
local -n ret="$2"
# Pick the first free index to return as the allocated entry
for (( ret = 0; ret < "${#IPMI_FRU_EEPROM_FILE[@]}"; ++ret )); do
[ -n "${IPMI_FRU_EEPROM_FILE[*]+1}" ] || \
[ -n "${IPMI_FRU_EEPROM_BUSADDR[*]+1}" ]|| break
done
if [[ "$name" =~ ^of-name:(.*)$ || "$name" =~ ^([^:]*)$ ]]; then
local ofn="${BASH_REMATCH[1]}"
local file
file="$(of_name_to_eeprom "$ofn")" || return
IPMI_FRU_EEPROM_FILE["$ret"]="$file"
elif [[ "$name" =~ ^frudev-name:(.*)$ ]]; then
local fdn="${BASH_REMATCH[1]}"
local start=$SECONDS
local file
while (( SECONDS - start < 300 )); do
local rc=0
ipmi_fru_device_alloc "$fdn" "$ret" || rc=$?
(( rc == 0 )) && break
# Immediately return any errors, 80 is special to signify retry
(( rc != 80 )) && return $rc
sleep 1
done
else
echo "Invalid IPMI FRU eeprom specification: $name" >&2
return 1
fi
}
ipmi_fru_free() {
unset 'IPMI_FRU_EEPROM_FILE[$1]'
unset 'IPMI_FRU_EEPROM_BUSADDR[$1]'
}
checksum() {
local -n checksum_arr="$1"
local checksum=0
for byte in "${checksum_arr[@]}"; do
checksum=$((checksum + byte))
done
echo $((checksum & 0xff))
}
fix_checksum() {
local -n fix_checksum_arr="$1"
old_cksum=${fix_checksum_arr[$IPMI_FRU_CHECKSUM_IDX]}
((fix_checksum_arr[IPMI_FRU_CHECKSUM_IDX]-=$(checksum fix_checksum_arr)))
((fix_checksum_arr[IPMI_FRU_CHECKSUM_IDX]&=0xff))
printf 'Corrected %s checksum from 0x%02X -> 0x%02X\n' \
"$1" "${old_cksum}" "${fix_checksum_arr[$IPMI_FRU_CHECKSUM_IDX]}" >&2
}
read_bytes() {
# shellcheck disable=SC2206
local busaddr=(${IPMI_FRU_EEPROM_BUSADDR["$1"]-})
local file="${IPMI_FRU_EEPROM_FILE["$1"]-$1}"
local offset="$2"
local size="$3"
if (( "${#busaddr[@]}" > 0)); then
echo "Reading ${busaddr[*]} at $offset for $size" >&2
# shellcheck disable=SC2046
i2ctransfer -f -y "${busaddr[0]}" $("${busaddr[2]}" "${busaddr[1]}" "$offset") "r$size"
else
echo "Reading $file at $offset for $size" >&2
dd if="$file" bs=1 count="$size" skip="$offset" 2>/dev/null | \
hexdump -v -e '1/1 "%d "'
fi
}
write_bytes() {
# shellcheck disable=SC2206
local busaddr=(${IPMI_FRU_EEPROM_BUSADDR["$1"]-})
local file="${IPMI_FRU_EEPROM_FILE["$1"]-$1}"
local offset="$2"
local -n bytes_arr="$3"
if (( "${#busaddr[@]}" > 0)); then
echo "Writing ${busaddr[*]} at $offset for ${#bytes_arr[@]}" >&2
# shellcheck disable=SC2046
i2ctransfer -f -y "${busaddr[0]}" $("${busaddr[2]}" "${busaddr[1]}" "$offset" "${#bytes_arr[@]}") "${bytes_arr[@]}"
else
local hexstr
hexstr="$(printf '\\x%x' "${bytes_arr[@]}")" || return
echo "Writing $file at $offset for ${#bytes_arr[@]}" >&2
# shellcheck disable=SC2059
printf "$hexstr" | dd of="$file" bs=1 seek="$offset" 2>/dev/null
fi
}
read_header() {
local eeprom="$1"
local -n header_arr="$2"
# shellcheck disable=SC2207
header_arr=($(read_bytes "$eeprom" 0 8)) || return
echo "Checking $eeprom FRU Header version" >&2
# FRU header is always version 1
(( header_arr[0] == 1 )) || return
echo "Checking $eeprom FRU Header checksum" >&2
local sum
sum="$(checksum header_arr)" || return
# Checksums should be valid
(( sum == 0 )) || return 10
}
read_area() {
local eeprom="$1"
local offset="$2"
local -n area_arr="$3"
local area_size="${4-0}"
offset=$((offset*8))
# shellcheck disable=SC2207
area_arr=($(read_bytes "$eeprom" "$offset" 8)) || return
echo "Checking $eeprom $offset FRU Area version" >&2
# FRU Area is always version 1
(( area_arr[0] == 1 )) || return
if (( area_size == 0 )); then
area_size=${area_arr[$IPMI_FRU_AREA_HEADER_SIZE_IDX]}
fi
# shellcheck disable=SC2207
area_arr=($(read_bytes "$eeprom" "$offset" $((area_size*8)))) || return
echo "Checking $eeprom $offset FRU Area checksum" >&2
local sum
sum="$(checksum area_arr)" || return
# Checksums should be valid
(( sum == 0 )) || return 10
}
ipmi_fru_init=1