meta-quanta/meta-olympus-nuvoton/recipes-bsp/images/files/BootBlockAndHeader_olympus.xml

<!-- SPDX-License-Identifier: GPL-2.0
#
# Nuvoton IGPS: Image Generation And Programming Scripts For Poleg BMC
#
# Copyright (C) 2018 Nuvoton Technologies, All Rights Reserved
#--------------------------------------------------------------------------->

<?xml version="1.0" encoding="UTF-8"?>

<Bin_Ecc_Map>
	<!-- BMC mandatory fields -->
	<ImageProperties>
		<BinSize>0</BinSize>         <!-- If 0 the binary size will be calculated by the tool -->
		<PadValue>0xFF</PadValue>	<!-- Byte value to pad the empty areas, default is 0 -->
	</ImageProperties>

	<BinField>
		<!-- BootBlock tag (0x50 0x07 0x55 0xAA 0x54 0x4F 0x4F 0x42) or
			     uboot tag (0x55 0x42 0x4F 0x4F 0x54 0x42 0x4C 0x4B) -->
		<name>StartTag</name>         <!-- name of field -->
		<config>
			<offset>0</offset>            <!-- offset in the header -->
			<size>0x8</size>              <!-- size in the header -->
		</config>
		<content format='bytes'>0x50 0x07 0x55 0xAA 0x54 0x4F 0x4F 0x42</content>  <!-- content the user should fill -->
	</BinField>

	<BinField>
		<!-- Code destination address, 32-bit aligned: for BootBlock should be 0xFFFD5E00 so code will run in 0xFFFD6000 as linked for -->
		<name>DestAddr</name>         <!-- name of field -->
		<config>
			<offset>0x140</offset>        <!-- offset in the header -->
			<size>0x4</size>              <!-- size in the header -->
		</config>
		<content format='32bit'>0xFFFD5E00</content>     <!-- content the user should fill -->
	</BinField>

	<BinField>
		<!-- BootBlock or u-boot Code size -->
		<name>CodeSize</name>         <!-- name of field -->
		<config>
			<offset>0x144</offset>        <!-- offset in the header -->
			<size>0x4</size>              <!-- size in the header -->
		</config>
		<content format='FileSize'>Poleg_bootblock.bin</content>	<!-- content the user should fill -->
	</BinField>

	<BinField>
		<!-- The BootBlock or u-boot binary file -->
		<name>Code</name>             <!-- name of field -->
		<config>
			<offset>0x200</offset>        <!-- offset in the header -->
			<size format='FileSize'>Poleg_bootblock.bin</size>                 <!-- size in the header calculated by tool-->
		</config>
		<content format='FileContent'>Poleg_bootblock.bin</content>  <!-- content the user should fill -->
	</BinField>

	<!-- BMC optional fields -->
	<BinField>
		<!-- Word contents copied by ROM code to FIU0 FIU_DRD_CFG register -->
		<name>FIU0_DRD_CFG_Set</name>  <!-- name of field -->
		<config>
			<offset>0x108</offset>        <!-- offset in the header -->
			<size>0x4</size>              <!-- size in the header -->
		</config>
		<content format='32bit'>0x030011BB</content>               <!-- content the user should fill -->
	</BinField>

	<BinField>
		<!-- Defines the clock divide ratio from AHB to FIU0 clock -->
		<name>FIU_Clk_Divider</name>  <!-- name of field -->
		<config>
			<offset>0x10C</offset>        <!-- offset in the header -->
			<size>0x1</size>              <!-- size in the header -->
		</config>
		<content format='bytes'>4</content>               <!-- content the user should fill -->
	</BinField>

	<BinField>
		<!-- Version (Major.Minor) -->
		<name>Version</name>          <!-- name of field -->
		<config>
			<offset>0x148</offset>        <!-- offset in the header -->
			<size>0x4</size>              <!-- size in the header -->
		</config>
		<content format='32bit'>0x0201</content>               <!-- content the user should fill -->
	</BinField>

	<BinField>
		<!-- Board manufaturer ( Dell = 0, Nuvoton = 100, Google = 1, MS = 2) -->
		<name>BOARD_VENDOR</name>          <!-- name of field -->
		<config>
			<offset>0x124</offset>        <!-- offset in the header -->
			<size>0x4</size>              <!-- size in the header -->
		</config>
		<content format='32bit'>100</content>                              <!--Board_manufacturer: Nuvoton-->
	</BinField>
	<BinField>
		<!-- Board type ( DRB = 0, SVB = 1, EB = 2,HORIZON = 3, SANDSTORM = 4, ROCKAWAY = 100 RunBMC = 10) -->
		<!-- WARNING: Currently this value is only printed to serial. Set BOARD_VENDOR to 1 get Dell specific customization. -->
		<name>BOARD_TYPE</name>          <!-- name of field -->
		<config>
			<offset>0x120</offset>        <!-- offset in the header -->
			<size>0x4</size>              <!-- size in the header -->
		</config>
		<content format='32bit'>0x0A</content>                                   <!--Board_type: SVB-->
	</BinField>

	<!-- the next two fields are available since version 10.7.0 -->
	<BinField>
		<!-- supported values: 333,444,500,600,666,700,720,750,775,787,800,825,850,900,950,1000,1060 -->
		<name>MC_FREQ_IN_MHZ</name>          <!-- name of field -->
		<config>
			<offset>0x128</offset>        <!-- offset in the header -->
			<size>0x2</size>              <!-- size in the header -->
		</config>
		<content format='32bit'>800</content>
	</BinField>
	<BinField>
		<!-- supporeted values: 333,500,600,666,700,720,750,800,825,850,900,950,1000,1060 -->
		<name>CPU_FREQ_IN_MHZ</name>          <!-- name of field -->
		<config>
			<offset>0x12A</offset>        <!-- offset in the header -->
			<size>0x2</size>              <!-- size in the header -->
		</config>
		<content format='32bit'>800</content>
	</BinField>

	<BinField>
		<!-- MC_CONFIG.
			Bit 0: MC_DISABLE_CAPABILITY_INPUT_DQS_ENHANCE_TRAINING (0x01)
			Bit 1:  MC_CAPABILITY_IGNORE_ECC_DEVICE         (0x02) -->
		<name>MC_CONFIG</name>          <!-- name of field -->
		<config>
			<offset>0x12C</offset>        <!-- offset in the header -->
			<size>0x1</size>              <!-- size in the header -->
		</config>
		<content format='32bit'>0x01</content>
	</BinField>

	<BinField>
		<!-- HOST_IF.
			0xFF: LPC backward compatible
			0x00: LPC.
			0x01: eSPI
			0x02: GPIOs TRIS.  -->
		<name>HOST_IF</name>          <!-- name of field -->
		<config>
			<offset>0x12D</offset>        <!-- offset in the header -->
			<size>0x1</size>              <!-- size in the header -->
		</config>
		<content format='32bit'>0x00</content>
	</BinField>

	<!-- reserved fields -->
	<BinField>
		<!-- reserved field for sample -->
		<name>My_reserved</name>  <!-- name of field -->
		<config>
			<offset>0x110</offset>        <!-- offset in the header -->
			<size>0x4</size>              <!-- size in the header -->
		</config>
		<content format='bytes'>0xFF 0xFF 0xFF 0xFF</content>  <!-- content the user should fill -->
	</BinField>

</Bin_Ecc_Map>