blob: c6c51c951f2c735ea287848dfe5a2ab13b8bbe12 [file] [log] [blame]
From ce27f7e22b2cd7453a425e08780a338a71301961 Mon Sep 17 00:00:00 2001
From: Leon Anavi <leon.anavi@konsulko.com>
Date: Mon, 20 Nov 2023 15:19:15 +0200
Subject: [PATCH] config.txt: reintroduce start_x
Reintroduce configuration "start_x". Based on the experience with
Yocto/OpenEmbedded layer meta-raspberrypi, it has been observed
that Raspberry Pi 4B 4GB may fail to enable the camera if
"start_x=1" is at the end of the file. Therefore, "start_x=1"
is expected in config.txt template and it has been set to replace
the original occurrence, which is at the middle of the file.
Also update revision and date stamp.
GitHub pull request: https://github.com/Evilpaul/RPi-config/pull/8
Upstream-Status: Submitted
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
---
config.txt | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/config.txt b/config.txt
index 1cf7b29..e28ed02 100644
--- a/config.txt
+++ b/config.txt
@@ -1,7 +1,7 @@
################################################################################
## Raspberry Pi Configuration Settings
##
-## Revision 17, 2021/08/15
+## Revision 18, 2023/11/20
##
## Details taken from the eLinux wiki and official Raspberry Pi documentation.
## For up-to-date information please refer to links below.
@@ -760,6 +760,16 @@
## Camera Settings
################################################################################
+## start_x
+## Set to "1" to enable the camera module.
+##
+## Enabling the camera requires gpu_mem option to be specified with a value
+## of at least 128.
+##
+## Default 0
+##
+#start_x=0
+
## disable_camera_led
## Turn off the red camera led when recording video or taking a still
## picture.
--
2.39.2