poky: subtree update:2dcd1f2a21..9d1b332292
Alejandro Hernandez Samaniego (2):
baremetal-helloworld: Enable RISC-V 64 port
baremetal-image: Fix post process command rootfs_update_timestamp
Alexander Kanavin (94):
python3: add markdown/smartypants/typogrify modules
gi-docgen: add a recipe and class
gdk-pixbuf/pango: replace gtk-doc with gi-docgen
vala: upgrade 0.50.4 -> 0.52.2
xkbcomp: upgrade 1.4.4 -> 1.4.5
stress-ng: upgrade 0.12.05 -> 0.12.06
xserver-xorg: upgrade 1.20.10 -> 1.20.11
xorgproto: upgrade 2020.1 -> 2021.3
dpkg: update 1.20.7.1 -> 1.20.9
puzzles: update to latest revision
cmake: update 3.19.5 -> 3.20.1
meson: update 0.57.1 -> 0.57.2
systemd: backport a patch to avoid unnecessary rsync dependency with latest meson
pulseaudio: unbreak build with latest meson
libdnf: upgrade 0.58.0 -> 0.62.0
bluez5: upgrade 5.56 -> 5.58
libxkbcommon: update 1.0.3 -> 1.2.1
libgudev: update 234 -> 236
vulkan-samples: update to latest revision
gnupg: upgrade 2.2.27 -> 2.3.1
virglrenderer: update 0.8.2 -> 0.9.1
webkitgtk: update 2.30.6 -> 2.32.0
acl: upgrade 2.2.53 -> 2.3.1
bind: upgrade 9.16.12 -> 9.16.13
bison: upgrade 3.7.5 -> 3.7.6
createrepo-c: upgrade 0.17.0 -> 0.17.2
cronie: upgrade 1.5.5 -> 1.5.7
dnf: upgrade 4.6.0 -> 4.7.0
e2fsprogs: upgrade 1.46.1 -> 1.46.2
gnu-efi: upgrade 3.0.12 -> 3.0.13
systemd-boot: backport a fix to address failures with new gnu-efi
gobject-introspection: upgrade 1.66.1 -> 1.68.0
gtk+3: upgrade 3.24.25 -> 3.24.28
harfbuzz: upgrade 2.7.4 -> 2.8.0
less: upgrade 563 -> 581
libfm: upgrade 1.3.1 -> 1.3.2
libinput: upgrade 1.16.4 -> 1.17.1
libwpe: upgrade 1.8.0 -> 1.10.0
libxres: upgrade 1.2.0 -> 1.2.1
linux-firmware: upgrade 20210208 -> 20210315
pango: upgrade 1.48.2 -> 1.48.4
piglit: upgrade to latest revision
pkgconf: upgrade 1.7.3 -> 1.7.4
python3-hypothesis: upgrade 6.2.0 -> 6.9.1
python3-importlib-metadata: upgrade 3.4.0 -> 3.10.1
python3-pytest: upgrade 6.2.2 -> 6.2.3
python3-setuptools-scm: upgrade 5.0.1 -> 6.0.1
x264: upgrade to latest revision
ptest: add a test for orphaned ptests, and restore ones found by it
swig: fix upstream version check
liberation-fonts: fix upstream version check
Revert "go: Use dl.google.com for SRC_URI"
powertop: update 2.13 -> 2.14
mesa: add lmsensors PACKAGECONFIG
ffmpeg: update 4.3.2 -> 4.4
qemu: use 4 cores in qemu guests
avahi: disable gtk bits
gdk-pixbuf: rewrite the cross-build support for tests
gnome: drop upstream even condition from a few recipes
expat: upgrade 2.2.10 -> 2.3.0
meson.bbclass: split python routines into a separate class
gstreamer1.0-plugins-base: backport a patch to fix meson 0.58 builds
meson: update 0.57.2 -> 0.58.0
qemu: backport a patch to fix meson 0.58 builds
nativesdk-meson: correctly set cpu_family
bitbake: fetch2/wget: when checking latest versions, consider all numerical directories
mklibs: remove recipes and class
local.conf: Drop support for mklibs
u-boot: upgrade 2021.01 -> 2021.04
gdk-pixbuf: update a patch status
systemd: update 247.6 -> 248.3
systemd-conf: do not version in lockstep with systemd
gnu-config: update to latest revision
mmc-utils: update to latest revision
python3-smartypants: fix upstream version check
at: upgrade 3.2.1 -> 3.2.2
gnomebase: trim the SRC_URI directory from the back
gsettings-desktop-schemas: upgrade 3.38.0 -> 40.0
igt-gpu-tools: upgrade 1.25 -> 1.26
mesa: update 21.0.3 -> 21.1.1
vulkan-samples: update to latest revision
libgpg-error: update 1.41 -> 1.42
webkitgtk: update 2.32.0 -> 2.32.1
glib-2.0: update 2.68.1 -> 2.68.2
apt: upgrade 2.2.2 -> 2.2.3
cmake: update 3.20.1 -> 3.20.2
libdnf: update 0.62.0 -> 0.63.0
harfbuzz: update 2.8.0 -> 2.8.1
curl: update 7.76.0 -> 7.76.1
systemtap: update 4.4 -> 4.5
wayland: package target binaries into -tools, not into -dev
ptest: add newly discovered missing runtime dependencies across recipes
images: remove sato/weston ptest images
images: add ptest images based on core-image-minimal
Andreas Müller (1):
gstreamer1.0-plugins-good: fix build with gcc11
Andrej Valek (1):
expat: upgrade 2.3.0 -> 2.4.1
Anuj Mittal (1):
lsb-release: fix reproducibility failure
Armin Kuster (5):
bitbake: hashserv/server.py: drop unused imports
bitbake: hashserver/client.py: drop unused imports
poky.yaml: fedora33: add missing pkgs
systemctl: Stop tracebacks use formated error messages
package_manager/rpm: decode systemctl failures
Bastian Krause (1):
ccache: version bump 4.2.1 -> 4.3
Bruce Ashfield (18):
linux-yocto/5.4: qemuppc32: reduce serial shutdown issues
kern-tools: Kconfiglib: add support for bare 'modules' keyword
lttng-modules: update devupstream to v2.13-rc
lttng-modules: update to v2.12.6
kernel-yocto: provide debug / summary information for metadata
linux-yocto/5.10: update to v5.10.35
linux-yocto/5.4: update to v5.4.117
linux-yocto/5.10: ktypes/standard: disable obsolete crypto options by default
linux-yocto/5.10: update to v5.10.36
linux-yocto/5.4: update to v5.4.118
linux-yocto/5.10: update to v5.10.37
linux-yocto/5.4: update to v5.4.119
kernel-devsrc: adjust NM and OBJTOOL variables for target
linux-yocto/5.10: update to v5.10.38
linux-yocto-dev: bump to v5.13+
linux-yocto/5.4: update to v5.4.120
linux-yocto/5.10: update to v5.10.41
linux-yocto/5.4: update to v5.4.123
Carlos Rafael Giani (1):
ffmpeg: Add libopus packageconfig
Changqing Li (2):
unfs3: correct configure option
pkgconfig: update SRC_URI
Chen Qi (3):
db: update CVE_PRODUCT
rt-tests: update SRCREV
xxhash: backport patch to fix special char problem
Daniel McGregor (3):
lib/oe/gpg_sign.py: Fix gpg verification
sstate: Ignore sstate signing key
bison: Make libtextstyle and libreadline optional
Daniel Wagenknecht (1):
kernel-dev: document KCONFIG_MODE
Douglas Royds (3):
Revert "icecc: Don't use icecc when INHIBIT_DEFAULT_DEPS is set"
icecc: Demote "could not get ICECC_CC" warning to note
icecc-create-env: Silence warning: invalid ICECC_ENV_EXEC
Drew Moseley (1):
manuals: fix a few incorrect option specifications.
Guillaume Champagne (1):
image-live.bbclass: order do_bootimg after do_rootfs
Joshua Watt (1):
zstd: Add patch to fix MinGW builds
Kai Kang (1):
grub2.inc: remove '-O2' from CFLAGS
Khem Raj (17):
swig: Upgrade to 4.0.2
python3-markdown: Upgrade to 3.3.4
ffmpeg: Fix build on mips
npth: Check for pthread_create for including lpthread
gcc: Add target gcc include search for musl config too
gcc: Extend .gccrelocprefix section support to musl configs
gcc: Refresh patch to fix patch fuzz
musl: Fix __NR_fstatat syscall name for riscv
libxfixes: Update to 6.0.0 release
xorgproto: Upgrade to 2021.4 release
glibc: Update to latest 2.33 branch
systemd: Fix 248.3 on musl
glibc: Enable memory tagging for aarch64
gcc: Update to latest on release/gcc-11 branch
apt: Add missing <array> header
ovmf: Fix VLA warnings with GCC 11
libucontext: Switch to meson build system
Martin Jansa (4):
gcc-sanitizers: Package up static hwasan files as well
webkitgtk: fix build without opengl in DISTRO_FEATURES
binutils: backport DWARF-5 support for gold
sstatesig.py: make it fatal error when sstate manifest isn't found
Michael Halstead (3):
releases: update to include 3.2.4
uninative: Upgrade to 3.2 (gcc11 support)
releases: update to include 3.3.1
Michael Opdenacker (8):
manuals: reduce verbosity with "worry about" expression
manuals: reduce verbosity related to "the following" expression
ref-manual: simplify style
kernel-dev manual: simplify style
dev-manual: simplify style
sdk-manual: simplify style and fix formating
overview-manual: simplify style and add missings references
manuals: simplify style
Mike Crowe (2):
npm.bbclass: Allow nodedir to be overridden by NPM_NODEDIR
libnotify: Make gtk+3 dependency optional
Ming Liu (4):
kernel-fitimage.bbclass: fix a wrong conditional check
initramfs-framework:rootfs: fix wrong indentions
kernel-fitimage.bbclass: drop unit addresses from bootscr sections
uboot-sign/kernel-fitimage: split generate_rsa_keys task
Nikolay Papenkov (1):
flex: correct license information
Nisha Parrakat (1):
squashfs-tools: package squashfs-fs.h
Peter Kjellerstedt (3):
libcap: Configure Make variables correctly without a horrible hack
util-linux.inc: Do not modify BPN
native.bbclass: Do not remove "-native" in the middle of recipe names
Petr Vorel (1):
ltp: Update to 20210524
Richard Purdie (92):
oeqa/qemurunner: Fix binary vs str issue
oeqa/qemurunner: Improve handling of run_serial for shutdown commands
ptest-packagelists: Add expat-ptest to fast ptests
puzzles: Upstream changed to main branch for development
grub2: Add CVE whitelist entries for issues fixed in 2.06
glibc: Document and whitelist CVE-2019-1010022-25
qemu: Exclude CVE-2017-5957 from cve-check
qemu: Exclude CVE-2007-0998 from cve-check
qemu: Exclude CVE-2018-18438 from cve-check
jquery: Exclude CVE-2007-2379 from cve-check
logrotate: Exclude CVE-2011-1548,1549,1550 from cve-check
openssh: Exclude CVE-2007-2768 from cve-check
ovmf: Improve reproducibility by enabling prefix mapping
bind: Exclude CVE-2019-6470 from cve-check
openssh: Exclude CVE-2008-3844 from cve-check
unzip: Exclude CVE-2008-0888 from cve-check
cpio: Exclude CVE-2010-4226 from cve-check
xinetd: Exclude CVE-2013-4342 from cve-check
ghostscript: Exclude CVE-2013-6629 from cve-check
bluez: Exclude CVE-2020-12352 CVE-2020-24490 from cve-check
tiff: Exclude CVE-2015-7313 from cve-check
ovmf: Disable lto to aid reproducibility
ovmf: Fix other reproducibility issues
rpm: Exclude CVE-2021-20271 from cve-check
coreutils: Exclude CVE-2016-2781 from cve-check
librsvg: Exclude CVE-2018-1000041 from cve-check
avahi: Exclude CVE-2021-26720 from cve-check
qemu: Set SMP to 4 cpus for arm/x86 only
qemuboot-x86: Switch to IvyBridge and q35 instead of pc
qemu-x86: Add commandline options to improve boot
sstate: Handle manifest 'corruption' issue
lttng-ust: Upgrade 2.12.1 -> 2.12.2
qemu: Upgrade 5.2.0 -> 6.0.0
python3-markupsafe: Upgrade 1.1.1 -> 2.0.0
python3-jinja2: Upgrade 2.11.3 -> 3.0.0
ofono: upgrade 1.31 -> 1.32
libnss-mdns: upgrade 0.14.1 -> 0.15
python3-git: upgrade 3.1.14 -> 3.1.17
bind: upgrade 9.16.13 -> 9.16.15
vala: upgrade 0.52.2 -> 0.52.3
libjpeg-turbo: upgrade 2.0.6 -> 2.1.0
btrfs-tools: upgrade 5.12 -> 5.12.1
python3-hypothesis: upgrade 6.9.1 -> 6.12.0
python3-numpy: upgrade 1.20.2 -> 1.20.3
gtk+3: upgrade 3.24.28 -> 3.24.29
sudo: upgrade 1.9.6p1 -> 1.9.7
stress-ng: upgrade 0.12.06 -> 0.12.08
less: upgrade 581 -> 586
libtirpc: upgrade 1.3.1 -> 1.3.2
libinput: upgrade 1.17.1 -> 1.17.2
zstd: upgrade 1.4.9 -> 1.5.0
hdparm: upgrade 9.61 -> 9.62
libxkbcommon: upgrade 1.2.1 -> 1.3.0
spirv-tools: upgrade 2020.7 -> 2021.1
diffoscope: upgrade 172 -> 175
mpg123: upgrade 1.26.5 -> 1.27.2
sqlite3: upgrade 3.35.3 -> 3.35.5
wayland-protocols: upgrade 1.20 -> 1.21
shaderc: upgrade 2020.5 -> 2021.0
wpebackend-fdo: upgrade 1.8.3 -> 1.8.4
libxcrypt-compat: upgrade 4.4.19 -> 4.4.20
Revert "cml1.bbclass: Return sorted list of cfg files"
bitbake: server/process: Handle error in heartbeat funciton in OOM case
glibc: Add 8GB VM usage cap for usermode test suite
cve-extra-exclusions.inc: add exclusion list for intractable CVE's
rpm: Drop CVE exclusion as database fixed to handle
cve-extra-exclusions: Fix typos
grub: Exclude CVE-2019-14865 from cve-check
cve-extra-exclusions.inc: Clean up merged CPE updates
ltp: Disable problematic tests causing autobuilder hangs
python3-setuptools: upgrade 56.0.0 -> 56.2.0
distro/maintainers: Fix up the ptest image entries
oeqa/runtime/rpm: Drop log message counting test component
linux-firmware: upgrade 20210315 -> 20210511
libxcrypt: Upgrade 4.4.20 -> 4.4.22
iproute2: upgrade 5.11.0 -> 5.12.0
libx11: upgrade 1.7.0 -> 1.7.1
python3-hypothesis: upgrade 6.12.0 -> 6.13.7
pango: upgrade 1.48.4 -> 1.48.5
python3-importlib-metadata: upgrade 4.0.1 -> 4.3.0
libmodulemd: upgrade 2.12.0 -> 2.12.1
vte: upgrade 0.64.0 -> 0.64.1
libinput: upgrade 1.17.2 -> 1.17.3
gi-docgen: upgrade 2021.5 -> 2021.6
kmod: upgrade 28 -> 29
xorgproto: upgrade 2021.4 -> 2021.4.99.1
libpcre2: upgrade 10.36 -> 10.37
libepoxy: upgrade 1.5.5 -> 1.5.8
python3-jinja2: upgrade 3.0.0 -> 3.0.1
curl: upgrade 7.76.1 -> 7.77.0
python3-setuptools: upgrade 56.2.0 -> 57.0.0
oeqa/qemurunner: Improve timeout handling
Richard Weinberger (1):
Add support for erofs filesystems
Robert Joslyn (3):
liberation-fonts: Update to 2.1.4
epiphany: Update to 40.1
btrfs-tools: Update to 5.12
Robert P. J. Day (8):
sdk-manual: couple minor fixes in using.rst
sdk-manual: various cleanups to intro.rst
ref-manual: delete references to dead LSB compliance
ref-manual: delete extraneous back quote
image.bbclass: fix comment "pacackages" -> "packages"
meta/lib/oe/rootfs.py: Fix typo "Restoreing" -> "Restoring"
bitbake.conf: alphabetize contents of ASSUME_PROVIDED
ref-manual: add links to some variables in glossary
Romain Naour (1):
dejagnu: needs expect at runtime
Ross Burton (12):
cairo: backport patch for CVE-2020-35492
libnotify: whitelist CVE-2013-7381 (specific to the NodeJS bindings)
builder: whitelist CVE-2008-4178 (a different builder)
libarchive: disable redundant libxml2 PACKAGECONFIG
meson: update patch status
cups: whitelist CVE-2021-25317
libsolv: add missing db dependency
rpm: turn Berkeley DB hard dependency into PACKAGECONFIG
python3: update status on upstreamed patch
ref-manual: Ubuntu 20.04 is also LTS
package_rpm: pass XZ_THREADS to rpm
gcc: revert libstc++-gdb.py installation changes
Samuli Piippo (3):
gcc-cross-canadian: add symlinks for ld.bfd and ld.gold
libarchive: enable zstd support
cmake-native: enabled zstd support
Stefan Ghinea (1):
boost: fix do_fetch failure
Steve Sakoman (1):
expat: set CVE_PRODUCT
Tony Tascioglu (3):
libxml2: Reformat runtest.patch
libxml2: Add bash dependency for ptests.
libxml2: Update to 2.9.12
Trevor Gamblin (2):
python3: upgrade 3.9.4 -> 3.9.5
bind: upgrade 9.16.15 -> 9.16.16
Ulrich Ölmann (1):
local.conf.sample: fix typo
Vinícius Ossanes Aquino (1):
lttng-modules: backport patches to fix build against 5.12+ kernel
Yann Dirson (1):
linux-firmware: include all relevant files in -bcm4356
hongxu (1):
gdk-pixbuf: fix nativesdk do_configure failed
wangmy (21):
python3-pygments: upgrade 2.8.1 -> 2.9.0
at-spi2-core: upgrade 2.40.0 -> 2.40.1
ell: upgrade 0.39 -> 0.40
kexec-tools: upgrade 2.0.21 -> 2.0.22
go: upgrade 1.16.3 -> 1.16.4
python3-attrs: upgrade 20.3.0 -> 21.2.0
python3-six: upgrade 1.15.0 -> 1.16.0
vulkan-samples: update to latest revision
vulkan-headers: upgrade 1.2.170.0 -> 1.2.176.0
vulkan-tools: upgrade 1.2.170.0 -> 1.2.176.0
vulkan-loader: upgrade 1.2.170.0 -> 1.2.176.0
distcc: upgrade 3.3.5 -> 3.4
libdrm: upgrade 2.4.105 -> 2.4.106
libidn2: upgrade 2.3.0 -> 2.3.1
libtasn1: upgrade 4.16.0 -> 4.17.0
python3-libarchive-c: upgrade 2.9 -> 3.0
python3-markupsafe: upgrade 2.0.0 -> 2.0.1
python3-more-itertools: upgrade 8.7.0 -> 8.8.0
python3-pytest: upgrade 6.2.3 -> 6.2.4
logrotate: upgrade 3.18.0 -> 3.18.1
stress-ng: upgrade 0.12.08 -> 0.12.09
zhengruoqin (10):
busybox: upgrade 1.33.0 -> 1.33.1
rng-tools: upgrade 6.11 -> 6.12
rpcbind: upgrade 1.2.5 -> 1.2.6
sysklogd: upgrade 2.2.2 -> 2.2.3
python3-importlib-metadata: upgrade 3.10.1 -> 4.0.1
python3-sortedcontainers: upgrade 2.3.0 -> 2.4.0
rxvt-unicode: upgrade 9.22 -> 9.26
libedit: upgrade 20210419-3.1 -> 20210522-3.1
libtest-needs-perl: upgrade 0.002006 -> 0.002009
libucontext: upgrade 0.10 -> 1.1
Change-Id: I5e5148036ac2a7918974733e5751c3392139b17e
Signed-off-by: William A. Kennington III <wak@google.com>
diff --git a/poky/bitbake/lib/bb/fetch2/wget.py b/poky/bitbake/lib/bb/fetch2/wget.py
index 6d82f3a..784df70 100644
--- a/poky/bitbake/lib/bb/fetch2/wget.py
+++ b/poky/bitbake/lib/bb/fetch2/wget.py
@@ -472,7 +472,7 @@
version_dir = ['', '', '']
version = ['', '', '']
- dirver_regex = re.compile(r"(?P<pfx>\D*)(?P<ver>(\d+[\.\-_])+(\d+))")
+ dirver_regex = re.compile(r"(?P<pfx>\D*)(?P<ver>(\d+[\.\-_])*(\d+))")
s = dirver_regex.search(dirver)
if s:
version_dir[1] = s.group('ver')
diff --git a/poky/bitbake/lib/bb/server/process.py b/poky/bitbake/lib/bb/server/process.py
index 3e99bce..155e8d1 100644
--- a/poky/bitbake/lib/bb/server/process.py
+++ b/poky/bitbake/lib/bb/server/process.py
@@ -367,7 +367,12 @@
self.next_heartbeat = now + self.heartbeat_seconds
if hasattr(self.cooker, "data"):
heartbeat = bb.event.HeartbeatEvent(now)
- bb.event.fire(heartbeat, self.cooker.data)
+ try:
+ bb.event.fire(heartbeat, self.cooker.data)
+ except Exception as exc:
+ if not isinstance(exc, bb.BBHandledException):
+ logger.exception('Running heartbeat function')
+ self.quit = True
if nextsleep and now + nextsleep > self.next_heartbeat:
# Shorten timeout so that we we wake up in time for
# the heartbeat.
diff --git a/poky/bitbake/lib/hashserv/client.py b/poky/bitbake/lib/hashserv/client.py
index 5311709..1a67c69 100644
--- a/poky/bitbake/lib/hashserv/client.py
+++ b/poky/bitbake/lib/hashserv/client.py
@@ -3,11 +3,8 @@
# SPDX-License-Identifier: GPL-2.0-only
#
-import asyncio
-import json
import logging
import socket
-import os
import bb.asyncrpc
from . import create_async_client
diff --git a/poky/bitbake/lib/hashserv/server.py b/poky/bitbake/lib/hashserv/server.py
index c941c0e..8e84989 100644
--- a/poky/bitbake/lib/hashserv/server.py
+++ b/poky/bitbake/lib/hashserv/server.py
@@ -6,13 +6,8 @@
from contextlib import closing, contextmanager
from datetime import datetime
import asyncio
-import json
import logging
import math
-import os
-import signal
-import socket
-import sys
import time
from . import create_async_client, TABLE_COLUMNS
import bb.asyncrpc
@@ -124,7 +119,6 @@
if d is not None:
# Filter out unknown columns
d = {k: v for k, v in d.items() if k in TABLE_COLUMNS}
- keys = sorted(d.keys())
with closing(db.cursor()) as cursor:
insert_task(cursor, d)
@@ -137,7 +131,6 @@
if d is not None:
# Filter out unknown columns
d = {k: v for k, v in d.items() if k in TABLE_COLUMNS}
- keys = sorted(d.keys())
with closing(db.cursor()) as cursor:
insert_task(cursor, d)
diff --git a/poky/documentation/README b/poky/documentation/README
index 176c6db..3ad23a9 100644
--- a/poky/documentation/README
+++ b/poky/documentation/README
@@ -32,7 +32,7 @@
Manual Organization
===================
-Folders exist for individual manuals as follows:
+Here the folders corresponding to individual manuals:
* sdk-manual - The Yocto Project Software Development Kit (SDK) Developer's Guide.
* bsp-guide - The Yocto Project Board Support Package (BSP) Developer's Guide
@@ -167,7 +167,7 @@
Section
Section
-The following headings styles are defined in Sphinx:
+Here are the heading styles defined in Sphinx:
Book => overline ===
Chapter => overline ***
diff --git a/poky/documentation/brief-yoctoprojectqs/index.rst b/poky/documentation/brief-yoctoprojectqs/index.rst
index 6a12b19..7ae4526 100644
--- a/poky/documentation/brief-yoctoprojectqs/index.rst
+++ b/poky/documentation/brief-yoctoprojectqs/index.rst
@@ -297,7 +297,7 @@
Follow these steps to add a hardware layer:
-#. **Find a Layer:** Lots of hardware layers exist. The Yocto Project
+#. **Find a Layer:** Many hardware layers are available. The Yocto Project
:yocto_git:`Source Repositories <>` has many hardware layers.
This example adds the
`meta-altera <https://github.com/kraj/meta-altera>`__ hardware layer.
@@ -318,8 +318,8 @@
Resolving deltas: 100% (13385/13385), done.
Checking connectivity... done.
- The hardware layer now exists
- with other layers inside the Poky reference repository on your build
+ The hardware layer is now available
+ next to other layers inside the Poky reference repository on your build
host as ``meta-altera`` and contains all the metadata needed to
support hardware from Altera, which is owned by Intel.
@@ -431,8 +431,8 @@
information.
- **Yocto Project Mailing Lists:** Related mailing lists provide a forum
- for discussion, patch submission and announcements. Several mailing
- lists exist and are grouped according to areas of concern. See the
+ for discussion, patch submission and announcements. There are several
+ mailing lists grouped by topic. See the
:ref:`ref-manual/resources:mailing lists`
section in the Yocto Project Reference Manual for a complete list of
Yocto Project mailing lists.
diff --git a/poky/documentation/bsp-guide/bsp.rst b/poky/documentation/bsp-guide/bsp.rst
index 0b0b52d..b46773d 100644
--- a/poky/documentation/bsp-guide/bsp.rst
+++ b/poky/documentation/bsp-guide/bsp.rst
@@ -267,7 +267,7 @@
are separate components that could be combined in certain end products.
Before looking at the recommended form for the directory structure
-inside a BSP layer, you should be aware that some requirements do exist
+inside a BSP layer, you should be aware that there are some requirements
in order for a BSP layer to be considered compliant with the Yocto
Project. For that list of requirements, see the
":ref:`bsp-guide/bsp:released bsp requirements`" section.
@@ -763,8 +763,8 @@
.. note::
- - Four hardware reference BSPs exist that are part of the Yocto
- Project release and are located in the ``poky/meta-yocto-bsp``
+ - There are four hardware reference BSPs in the Yocto
+ Project release, located in the ``poky/meta-yocto-bsp``
BSP layer:
- Texas Instruments Beaglebone (``beaglebone-yocto``)
@@ -773,8 +773,8 @@
- Two general IA platforms (``genericx86`` and ``genericx86-64``)
- - Three core Intel BSPs exist as part of the Yocto Project
- release in the ``meta-intel`` layer:
+ - There are three core Intel BSPs in the Yocto Project
+ release, in the ``meta-intel`` layer:
- ``intel-core2-32``, which is a BSP optimized for the Core2
family of CPUs as well as all CPUs prior to the Silvermont
@@ -832,10 +832,8 @@
Requirements and Recommendations for Released BSPs
==================================================
-Certain requirements exist for a released BSP to be considered compliant
-with the Yocto Project. Additionally, recommendations also exist. This
-section describes the requirements and recommendations for released
-BSPs.
+This section describes requirements and recommendations for a released
+BSP to be considered compliant with the Yocto Project.
Released BSP Requirements
-------------------------
@@ -864,7 +862,7 @@
- It is not required that specific packages or package modifications
exist in the BSP layer, beyond the requirements for general
- compliance with the Yocto Project. For example, no requirement exists
+ compliance with the Yocto Project. For example, there is no requirement
dictating that a specific kernel or kernel version be used in a given
BSP.
@@ -900,7 +898,7 @@
- *License File:* You must include a license file in the
``meta-bsp_root_name`` directory. This license covers the BSP
Metadata as a whole. You must specify which license to use since no
- default license exists when one is not specified. See the
+ default license exists. See the
:yocto_git:`COPYING.MIT </meta-raspberrypi/tree/COPYING.MIT>`
file for the Raspberry Pi BSP in the ``meta-raspberrypi`` BSP layer
as an example.
@@ -1107,7 +1105,7 @@
unsuitable functionality or quality, you can use an encumbered
version.
-A couple different methods exist within the OpenEmbedded build system to
+There are two different methods within the OpenEmbedded build system to
satisfy the licensing requirements for an encumbered BSP. The following
list describes them in order of preference:
@@ -1186,11 +1184,11 @@
- *Create a Machine Configuration File:* Create a
``conf/machine/bsp_root_name.conf`` file. See
:yocto_git:`meta-yocto-bsp/conf/machine </poky/tree/meta-yocto-bsp/conf/machine>`
- for sample ``bsp_root_name.conf`` files. Other samples such as
+ for sample ``bsp_root_name.conf`` files. There are other samples such as
:yocto_git:`meta-ti </meta-ti/tree/conf/machine>`
and
:yocto_git:`meta-freescale </meta-freescale/tree/conf/machine>`
- exist from other vendors that have more specific machine and tuning
+ from other vendors that have more specific machine and tuning
examples.
- *Create a Kernel Recipe:* Create a kernel recipe in
@@ -1241,7 +1239,7 @@
configuration file is what makes a layer a BSP layer as compared to a
general or kernel layer.
-One or more machine configuration files exist in the
+There are one or more machine configuration files in the
``bsp_layer/conf/machine/`` directory of the layer::
bsp_layer/conf/machine/machine1\.conf
@@ -1311,7 +1309,7 @@
- :term:`PREFERRED_PROVIDER_virtual/xserver <PREFERRED_PROVIDER>`:
The recipe that provides "virtual/xserver" when more than one
provider is found. In this case, the recipe that provides
- "virtual/xserver" is "xserver-xorg", which exists in
+ "virtual/xserver" is "xserver-xorg", available in
``poky/meta/recipes-graphics/xorg-xserver``.
- :term:`XSERVER`: The packages that
@@ -1326,7 +1324,7 @@
.. tip::
- Many ``MACHINE*`` variables exist that help you configure a particular piece
+ There are many ``MACHINE*`` variables that help you configure a particular piece
of hardware.
- :term:`EXTRA_IMAGEDEPENDS`:
@@ -1339,9 +1337,9 @@
- :term:`DEFAULTTUNE`: Machines
use tunings to optimize machine, CPU, and application performance.
These features, which are collectively known as "tuning features",
- exist in the :term:`OpenEmbedded-Core (OE-Core)` layer (e.g.
+ are set in the :term:`OpenEmbedded-Core (OE-Core)` layer (e.g.
``poky/meta/conf/machine/include``). In this example, the default
- tuning file is "cortexa8hf-neon".
+ tuning file is ``cortexa8hf-neon``.
.. note::
diff --git a/poky/documentation/dev-manual/common-tasks.rst b/poky/documentation/dev-manual/common-tasks.rst
index 37c7a19..1307341 100644
--- a/poky/documentation/dev-manual/common-tasks.rst
+++ b/poky/documentation/dev-manual/common-tasks.rst
@@ -346,7 +346,7 @@
of the Yocto Project for which your layer is compatible.
- *Acceptance Criteria:* Provide "Yes" or "No" answers for each of the
- items in the checklist. Space exists at the bottom of the form for
+ items in the checklist. There is space at the bottom of the form for
any explanations for items for which you answered "No".
- *Recommendations:* Provide answers for the questions regarding Linux
@@ -542,7 +542,7 @@
paths in the final list.
Also, not all append files add extra files. Many append files simply
- exist to add build options (e.g. ``systemd``). For these cases, your
+ allow to add build options (e.g. ``systemd``). For these cases, your
append file would not even use the ``FILESEXTRAPATHS`` statement.
Prioritizing Your Layer
@@ -1060,8 +1060,8 @@
Locate or Automatically Create a Base Recipe
--------------------------------------------
-You can always write a recipe from scratch. However, three choices exist
-that can help you quickly get a start on a new recipe:
+You can always write a recipe from scratch. However, there are three choices
+that can help you quickly get started with a new recipe:
- ``devtool add``: A command that assists in creating a recipe and an
environment conducive to development.
@@ -1521,8 +1521,8 @@
installed on the target in order for the software to run.
Within a recipe, you specify build-time dependencies using the
-:term:`DEPENDS` variable. Although
-nuances exist, items specified in ``DEPENDS`` should be names of other
+:term:`DEPENDS` variable. Although there are nuances,
+items specified in ``DEPENDS`` should be names of other
recipes. It is important that you specify all build-time dependencies
explicitly.
@@ -1589,7 +1589,7 @@
- *Autotools:* If your source files have a ``configure.ac`` file, then
your software is built using Autotools. If this is the case, you just
- need to worry about modifying the configuration.
+ need to modify the configuration.
When using Autotools, your recipe needs to inherit the
:ref:`autotools <ref-classes-autotools>` class
@@ -1603,7 +1603,7 @@
- *CMake:* If your source files have a ``CMakeLists.txt`` file, then
your software is built using CMake. If this is the case, you just
- need to worry about modifying the configuration.
+ need to modify the configuration.
When you use CMake, your recipe needs to inherit the
:ref:`cmake <ref-classes-cmake>` class and your
@@ -2183,8 +2183,8 @@
.. note::
- Equivalent support for pre-install, pre-uninstall, and post-uninstall
- scripts exist by way of ``pkg_preinst``, ``pkg_prerm``, and ``pkg_postrm``,
+ There is equivalent support for pre-install, pre-uninstall, and post-uninstall
+ scripts by way of ``pkg_preinst``, ``pkg_prerm``, and ``pkg_postrm``,
respectively. These scrips work in exactly the same way as does
``pkg_postinst`` with the exception that they run at different times. Also,
because of when they run, they are not applicable to being run at image
@@ -2376,7 +2376,7 @@
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Sometimes, you need to add pre-compiled binaries to an image. For
-example, suppose that binaries for proprietary code exist, which are
+example, suppose that there are binaries for proprietary code,
created by a particular division of a company. Your part of the company
needs to use those binaries as part of an image that you are building
using the OpenEmbedded build system. Since you only have the binaries
@@ -2513,7 +2513,7 @@
syntax, although access to OpenEmbedded variables and internal
methods are also available.
- The following is an example function from the ``sed`` recipe::
+ Here is an example function from the ``sed`` recipe::
do_install () {
autotools_do_install
@@ -2832,7 +2832,7 @@
by layer recipes. It is recommended to keep recipes up-to-date with
upstream version releases.
-While several methods exist that allow you upgrade a recipe, you might
+While there are several methods to upgrade a recipe, you might
consider checking on the upgrade status of a recipe first. You can do so
using the ``devtool check-upgrade-status`` command. See the
":ref:`devtool-checking-on-the-upgrade-status-of-a-recipe`"
@@ -2861,8 +2861,8 @@
.. note::
- Conditions do exist when you should not use AUH to upgrade recipes
- and you should instead use either ``devtool upgrade`` or upgrade your
+ In some conditions, you should not use AUH to upgrade recipes
+ and should instead use either ``devtool upgrade`` or upgrade your
recipes manually:
- When AUH cannot complete the upgrade sequence. This situation
@@ -2922,7 +2922,7 @@
undesirably.
5. *Make Configurations in Your Local Configuration File:* Several
- settings need to exist in the ``local.conf`` file in the build
+ settings are needed in the ``local.conf`` file in the build
directory you just created for AUH. Make these following
configurations:
@@ -3131,8 +3131,8 @@
NOTE: nano: compiling from external source tree /home/scottrif/poky/build/workspace/sources/nano
NOTE: Tasks Summary: Attempted 520 tasks of which 304 didn't need to be rerun and all succeeded.
-Within the ``devtool upgrade`` workflow, opportunity
-exists to deploy and test your rebuilt software. For this example,
+Within the ``devtool upgrade`` workflow, you can
+deploy and test your rebuilt software. For this example,
however, running ``devtool finish`` cleans up the workspace once the
source in your workspace is clean. This usually means using Git to stage
and submit commits for the changes generated by the upgrade process.
@@ -3214,7 +3214,7 @@
if the recipe is to be released publicly.
5. *Check the Upstream Change Log or Release Notes:* Checking both these
- reveals if new features exist that could break
+ reveals if there are new features that could break
backwards-compatibility. If so, you need to take steps to mitigate or
eliminate that situation.
@@ -3517,7 +3517,7 @@
In the development environment, you need to build an image whenever you
change hardware support, add or change system libraries, or add or
-change services that have dependencies. Several methods exist that allow
+change services that have dependencies. There are several methods that allow
you to build an image within the Yocto Project. This section presents
the basic steps you need to build a simple image using BitBake from a
build host running Linux.
@@ -4215,7 +4215,7 @@
sysroot for each machine is generated, the software is not recompiled
and only one package feed exists.
-- *Manage Granular Level Packaging:* Sometimes cases exist where
+- *Manage Granular Level Packaging:* Sometimes there are cases where
injecting another level of package architecture beyond the three
higher levels noted earlier can be useful. For example, consider how
NXP (formerly Freescale) allows for the easy reuse of binary packages
@@ -4281,7 +4281,7 @@
code. The build process involves fetching the source files, unpacking
them, and then patching them if necessary before the build takes place.
-Situations exist where you might want to build software from source
+There are situations where you might want to build software from source
files that are external to and thus outside of the OpenEmbedded build
system. For example, suppose you have a project that includes a new BSP
with a heavily customized kernel. And, you want to minimize exposing the
@@ -4648,7 +4648,7 @@
libraries could differ in architecture, compiler options, or other
optimizations.
-Several examples exist in the ``meta-skeleton`` layer found in the
+There are several examples in the ``meta-skeleton`` layer found in the
:term:`Source Directory`:
- ``conf/multilib-example.conf`` configuration file
@@ -4661,7 +4661,7 @@
~~~~~~~~~~~~~~~~~~~~~~~~~
User-specific requirements drive the Multilib feature. Consequently,
-there is no one "out-of-the-box" configuration that likely exists to
+there is no one "out-of-the-box" configuration that would
meet your needs.
In order to enable Multilib, you first need to ensure your recipe is
@@ -4724,8 +4724,8 @@
Additional Implementation Details
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Generic implementation details as well as details that are specific to
-package management systems exist. Following are implementation details
+There are generic implementation details as well as details that are specific to
+package management systems. Following are implementation details
that exist regardless of the package management system:
- The typical convention used for the class extension code as used by
@@ -4742,8 +4742,7 @@
vendor string presently break Autoconf's ``config.sub``, and other
separators are problematic for different reasons.
-For the RPM Package Management System, the following implementation
-details exist:
+Here are the implementation details for the RPM Package Management System:
- A unique architecture is defined for the Multilib packages, along
with creating a unique deploy folder under ``tmp/deploy/rpm`` in the
@@ -4764,8 +4763,7 @@
- The build system relies on RPM to resolve the identical files in the
two (or more) Multilib packages.
-For the IPK Package Management System, the following implementation
-details exist:
+Here are the implementation details for the IPK Package Management System:
- The ``${MLPREFIX}`` is not stripped from ``${PN}`` during IPK
packaging. The naming for a normal RPM package and a Multilib IPK
@@ -4783,9 +4781,9 @@
Installing Multiple Versions of the Same Library
------------------------------------------------
-Situations can exist where you need to install and use multiple versions
-of the same library on the same system at the same time. These
-situations almost always exist when a library API changes and you have
+There are be situations where you need to install and use multiple versions
+of the same library on the same system at the same time. This
+almost always happens when a library API changes and you have
multiple pieces of software that depend on the separate versions of the
library. To accommodate these situations, you can install multiple
versions of the same library in parallel on the same system.
@@ -4850,9 +4848,9 @@
- You can create and boot ``core-image-minimal`` and
``core-image-sato`` images.
-- RPM Package Manager (RPM) support exists for x32 binaries.
+- There is RPM Package Manager (RPM) support for x32 binaries.
-- Support for large images exists.
+- There is support for large images.
To use the x32 psABI, you need to edit your ``conf/local.conf``
configuration file as follows::
@@ -4918,7 +4916,7 @@
:term:`DISTRO_FEATURES_BACKFILL_CONSIDERED`
and that "qemu-usermode" is not in
:term:`MACHINE_FEATURES_BACKFILL_CONSIDERED`.
- If either of these conditions exist, nothing will happen.
+ In either of these conditions, nothing will happen.
3. Try to build the recipe. If you encounter build errors that look like
something is unable to find ``.so`` libraries, check where these
@@ -5005,7 +5003,7 @@
Known Issues
------------
-The following know issues exist for GObject Introspection Support:
+Here are know issues in GObject Introspection Support:
- ``qemu-ppc64`` immediately crashes. Consequently, you cannot build
introspection data on that architecture.
@@ -5184,7 +5182,7 @@
$ wic help overview
-One additional level of help exists for Wic. You can get help on
+There is one additional level of help for Wic. You can get help on
individual images through the ``list`` command. You can use the ``list``
command to return the available Wic images as follows::
@@ -5872,8 +5870,8 @@
General Considerations
----------------------
-General considerations exist that help you create more secure images.
-You should consider the following suggestions to help make your device
+There are general considerations that help you create more secure images.
+You should consider the following suggestions to make your device
more secure:
- Scan additional code you are adding to the system (e.g. application
@@ -6210,8 +6208,8 @@
The following list introduces variables you can use to prevent packages
from being installed into your image. Each of these variables only works
-with IPK and RPM package types. Support for Debian packages does not
-exist. Also, you can use these variables from your ``local.conf`` file
+with IPK and RPM package types, not for Debian packages.
+Also, you can use these variables from your ``local.conf`` file
or attach them to a specific image recipe by using a recipe name
override. For more detail on the variables, see the descriptions in the
Yocto Project Reference Manual's glossary chapter.
@@ -6285,7 +6283,7 @@
applications such as RPM, APT, and OPKG, using an automated system is
much preferred over a manual system. In either system, the main
requirement is that binary package version numbering increases in a
-linear fashion and that a number of version components exist that
+linear fashion and that there is a number of version components that
support that linear progression. For information on how to ensure
package revisioning remains linear, see the
":ref:`dev-manual/common-tasks:automatically incrementing a package version number`"
@@ -6342,7 +6340,7 @@
packages and there are no guarantees about upgrade paths but images will
be consistent and correct with the latest changes.
-The simplest form for a PR Service is for it to exist for a single host
+The simplest form for a PR Service is for a single host
development system that builds the package feed (building system). For
this scenario, you can enable a local PR Service by setting
:term:`PRSERV_HOST` in your
@@ -6545,7 +6543,7 @@
"Lighttpd module for alias".
Often, packaging modules is as simple as the previous example. However,
-more advanced options exist that you can use within
+there are more advanced options that you can use within
``do_split_packages`` to modify its behavior. And, if you need to, you
can add more logic by specifying a hook function that is called for each
package. It is also perfectly acceptable to call ``do_split_packages``
@@ -7024,7 +7022,7 @@
`passphrase`.
Aside from the ``RPM_GPG_NAME`` and ``RPM_GPG_PASSPHRASE`` variables in
-the previous example, two optional variables related to signing exist:
+the previous example, two optional variables related to signing are available:
- *GPG_BIN:* Specifies a ``gpg`` binary/wrapper that is executed
when the package is signed.
@@ -7046,14 +7044,14 @@
PACKAGE_FEED_GPG_NAME = "key_name"
PACKAGE_FEED_GPG_PASSPHRASE_FILE = "path_to_file_containing_passphrase"
-For signed package feeds, the passphrase must exist in a separate file,
+For signed package feeds, the passphrase must be specified in a separate file,
which is pointed to by the ``PACKAGE_FEED_GPG_PASSPHRASE_FILE``
variable. Regarding security, keeping a plain text passphrase out of the
configuration is more secure.
Aside from the ``PACKAGE_FEED_GPG_NAME`` and
``PACKAGE_FEED_GPG_PASSPHRASE_FILE`` variables, three optional variables
-related to signed package feeds exist:
+related to signed package feeds are available:
- *GPG_BIN* Specifies a ``gpg`` binary/wrapper that is executed
when the package is signed.
@@ -7192,7 +7190,7 @@
:doc:`devtool </ref-manual/devtool-reference>` to create
recipes that produce NPM packages.
-Two workflows exist that allow you to create NPM packages using
+There are two workflows that allow you to create NPM packages using
``devtool``: the NPM registry modules method and the NPM project code
method.
@@ -7296,7 +7294,7 @@
...
LICENSE_${PN}-vary = "MIT"
-Three key points exist in the previous example:
+Here are three key points in the previous example:
- :term:`SRC_URI` uses the NPM
scheme so that the NPM fetcher is used.
@@ -7413,7 +7411,7 @@
by the literal sequence '\\n'. The separator can be redefined using the
variable flag ``separator``.
-The following is an example that adds two custom fields for ipk
+Here is an example that adds two custom fields for ipk
packages::
PACKAGE_ADD_METADATA_IPK = "Vendor: CustomIpk\nGroup:Applications/Spreadsheets"
@@ -7488,7 +7486,7 @@
===================================
By default, the Yocto Project uses SysVinit as the initialization
-manager. However, support also exists for systemd, which is a full
+manager. However, there is also support for systemd, which is a full
replacement for init with parallel starting of services, reduced shell
overhead and other features that are used by many distributions.
@@ -7794,7 +7792,7 @@
image along with the new software even if you did not want the library.
The :ref:`buildhistory <ref-classes-buildhistory>`
-class exists to help you maintain the quality of your build output. You
+class helps you maintain the quality of your build output. You
can use the class to highlight unexpected and possibly unwanted changes
in the build output. When you enable build history, it records
information about the contents of each package and image and then
@@ -7844,12 +7842,12 @@
``${``\ :term:`TOPDIR`\ ``}/buildhistory``
in the Build Directory as defined by the
:term:`BUILDHISTORY_DIR`
-variable. The following is an example abbreviated listing:
+variable. Here is an example abbreviated listing:
.. image:: figures/buildhistory.png
:align: center
-At the top level, a ``metadata-revs`` file exists that lists the
+At the top level, there is a ``metadata-revs`` file that lists the
revisions of the repositories for the enabled layers when the build was
produced. The rest of the data splits into separate ``packages``,
``images`` and ``sdk`` directories, the contents of which are described
@@ -7885,7 +7883,7 @@
the package, and ``PKGSIZE``, which is the total size of files in the
package in bytes.
-A file also exists that corresponds to the recipe from which the package
+There is also a file that corresponds to the recipe from which the package
came (e.g. ``buildhistory/packages/i586-poky-linux/busybox/latest``):
.. code-block:: none
@@ -7900,8 +7898,8 @@
busybox-staticdev busybox-dev busybox-doc busybox-locale busybox
Finally, for those recipes fetched from a version control system (e.g.,
-Git), a file exists that lists source revisions that are specified in
-the recipe and lists the actual revisions used during the build. Listed
+Git), there is a file that lists source revisions that are specified in
+the recipe and the actual revisions used during the build. Listed
and actual revisions might differ when
:term:`SRCREV` is set to
${:term:`AUTOREV`}. Here is an
@@ -8141,7 +8139,7 @@
however, that this method does show changes that are not significant
(e.g. a package's size changing by a few bytes).
-A command-line tool called ``buildhistory-diff`` does exist, though,
+There is a command-line tool called ``buildhistory-diff``, though,
that queries the Git repository and prints just the differences that
might be significant in human-readable form. Here is an example::
@@ -8315,7 +8313,7 @@
In order to run tests on hardware, you need to set ``TEST_TARGET`` to an
appropriate value. For QEMU, you do not have to change anything, the
default value is "qemu". For running tests on hardware, the following
-options exist:
+options are available:
- *"simpleremote":* Choose "simpleremote" if you are going to run tests
on a target system that is already running the image to be tested and
@@ -8639,7 +8637,7 @@
- Do not use module names that collide with existing core tests.
-- Minimally, an empty ``__init__.py`` file must exist in the runtime
+- Minimally, an empty ``__init__.py`` file must be present in the runtime
directory.
To create a new test, start by copying an existing module (e.g.
@@ -8719,7 +8717,7 @@
Instance Attributes
~~~~~~~~~~~~~~~~~~~
-A single instance attribute exists, which is ``target``. The ``target``
+There is a single instance attribute, which is ``target``. The ``target``
instance attribute is identical to the class attribute of the same name,
which is described in the previous section. This attribute exists as
both an instance and class attribute so tests can use
@@ -9348,7 +9346,7 @@
The Yocto Project provides several logging functions for producing
debugging output and reporting errors and warnings. For Python
-functions, the following logging functions exist. All of these functions
+functions, the following logging functions are available. All of these functions
log to ``${T}/log.do_``\ `task`, and can also log to standard output
(stdout) with the right settings:
@@ -9454,8 +9452,8 @@
that are run simultaneously and a situation occurs when the output or
result of one part is not ready for use with a different part of the
build that depends on that output. Parallel make races are annoying and
-can sometimes be difficult to reproduce and fix. However, some simple
-tips and tricks exist that can help you debug and fix them. This section
+can sometimes be difficult to reproduce and fix. However, there are some simple
+tips and tricks that can help you debug and fix them. This section
presents a real-world example of an error encountered on the Yocto
Project autobuilder and the process used to fix it.
@@ -9578,7 +9576,7 @@
$ make tools/snep-send.o
The ``devshell`` commands cause the failure to clearly
-be visible. In this case, a missing dependency exists for the "neard"
+be visible. In this case, there is a missing dependency for the ``neard``
Makefile target. Here is some abbreviated, sample output with the
missing dependency clearly visible at the end::
@@ -9623,9 +9621,8 @@
$ quilt refresh
Refreshed patch patches/parallelmake.patch
-Once
-the patch file exists, you need to add it back to the originating recipe
-folder. Here is an example assuming a top-level
+Once the patch file is created, you need to add it back to the originating
+recipe folder. Here is an example assuming a top-level
:term:`Source Directory` named ``poky``::
$ cp patches/parallelmake.patch poky/meta/recipes-connectivity/neard/neard
@@ -10119,7 +10116,7 @@
The Yocto Project uses a mailing list and a patch-based workflow that is
similar to the Linux kernel but contains important differences. In
-general, a mailing list exists through which you can submit patches. You
+general, there is a mailing list through which you can submit patches. You
should send patches to the appropriate mailing list so that they can be
reviewed and merged by the appropriate maintainer. The specific mailing
list you need to use depends on the location of the code you are
@@ -10796,8 +10793,8 @@
Other Variables Related to Commercial Licenses
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Other helpful variables related to commercial license handling exist and
-are defined in the
+There are other helpful variables related to commercial license handling,
+defined in the
``poky/meta/conf/distro/include/default-distrovars.inc`` file::
COMMERCIAL_AUDIO_PLUGINS ?= ""
@@ -10841,7 +10838,7 @@
With hundreds of different open source licenses that the Yocto Project
tracks, it is difficult to know the requirements of each and every
license. However, the requirements of the major FLOSS licenses can begin
-to be covered by assuming that three main areas of concern exist:
+to be covered by assuming that there are three main areas of concern:
- Source code must be provided.
@@ -11058,7 +11055,7 @@
3. Meta-spdxscanner provides several methods within the bbclass to create spdx files.
Please choose one that you want to use and enable the spdx task. You have to
add some config options in ``local.conf`` file in your :term:`Build
- Directory`. The following is an example showing how to generate spdx files
+ Directory`. Here is an example showing how to generate spdx files
during bitbake using the fossology-python.bbclass::
# Select fossology-python.bbclass.
@@ -11088,7 +11085,7 @@
variable. Using this variable also avoids QA errors when you use a
non-common, non-CLOSED license in a recipe.
-The following is an example that uses the ``LICENSE.Abilis.txt`` file as
+Here is an example that uses the ``LICENSE.Abilis.txt`` file as
the license from the fetched source::
NO_GENERIC_LICENSE[Firmware-Abilis] = "LICENSE.Abilis.txt"
@@ -11105,9 +11102,9 @@
The server receives the information collected and saves it in a
database.
-A live instance of the error reporting server exists at
-https://errors.yoctoproject.org. This server exists so that when
-you want to get help with build failures, you can submit all of the
+There is a live instance of the error reporting server at
+https://errors.yoctoproject.org.
+When you want to get help with build failures, you can submit all of the
information on the failure easily and then point to the URL in your bug
report or send an email to the mailing list.
diff --git a/poky/documentation/dev-manual/qemu.rst b/poky/documentation/dev-manual/qemu.rst
index 2b6d3d7..88a63c1 100644
--- a/poky/documentation/dev-manual/qemu.rst
+++ b/poky/documentation/dev-manual/qemu.rst
@@ -219,15 +219,15 @@
Should you need to start, stop, or restart the NFS share, you can use
the following commands:
- - The following command starts the NFS share::
+ - To start the NFS share::
runqemu-export-rootfs start file-system-location
- - The following command stops the NFS share::
+ - To stop the NFS share::
runqemu-export-rootfs stop file-system-location
- - The following command restarts the NFS share::
+ - To restart the NFS share::
runqemu-export-rootfs restart file-system-location
@@ -275,7 +275,7 @@
.. note::
- Several mechanisms exist that let you connect to the system running
+ There are several mechanisms to connect to the system running
on the QEMU emulator:
- QEMU provides a framebuffer interface that makes standard consoles
@@ -286,7 +286,7 @@
that port to run a console. The connection uses standard IP
networking.
- - SSH servers exist in some QEMU images. The ``core-image-sato``
+ - SSH servers are available in some QEMU images. The ``core-image-sato``
QEMU image has a Dropbear secure shell (SSH) server that runs with
the root password disabled. The ``core-image-full-cmdline`` and
``core-image-lsb`` QEMU images have OpenSSH instead of Dropbear.
diff --git a/poky/documentation/dev-manual/start.rst b/poky/documentation/dev-manual/start.rst
index 18fd8cc..c3276c9 100644
--- a/poky/documentation/dev-manual/start.rst
+++ b/poky/documentation/dev-manual/start.rst
@@ -36,7 +36,7 @@
equipment together and set up your development environment's
hardware topology.
- The following roles exist:
+ Here are possible roles:
- *Application Developer:* This type of developer does application
level work on top of an existing software stack.
@@ -99,8 +99,7 @@
.. note::
The setup of these services is beyond the scope of this manual.
- However, sites such as the following exist that describe how to
- perform setup:
+ However, here are sites describing how to perform setup:
- `Gitolite <https://gitolite.com>`__: Information for
``gitolite``.
@@ -190,7 +189,7 @@
develop locally using their primary development system.
9. *Document Policies and Change Flow:* The Yocto Project uses a
- hierarchical structure and a pull model. Scripts exist to create and
+ hierarchical structure and a pull model. There are scripts to create and
send pull requests (i.e. ``create-pull-request`` and
``send-pull-request``). This model is in line with other open source
projects where maintainers are responsible for specific areas of the
@@ -215,8 +214,8 @@
someone else in the community needs them also.
10. *Development Environment Summary:* Aside from the previous steps,
- some best practices exist within the Yocto Project development
- environment. Consider the following:
+ here are best practices within the Yocto Project development
+ environment:
- Use :ref:`overview-manual/development-environment:git` as the source control
system.
@@ -607,8 +606,8 @@
The recommended method for accessing Yocto Project components is to
use Git to clone the upstream repository and work from within that
- locally cloned repository. The procedure in this section exists
- should you desire a tarball snapshot of any given component.
+ locally cloned repository. However, this section documents how to
+ use a tarball snapshot of any given component.
Follow these steps to locate and download a particular tarball:
@@ -645,13 +644,6 @@
tarballs similar to the tarballs located in the Index of Releases
described in the ":ref:`dev-manual/start:accessing index of releases`" section.
-.. note::
-
- The recommended method for accessing Yocto Project components is to
- use Git to clone a repository and work from within that local
- repository. The procedure in this section exists should you desire a
- tarball snapshot of any given component.
-
1. *Go to the Yocto Project Website:* Open The
:yocto_home:`Yocto Project Website <>` in your browser.
@@ -750,8 +742,8 @@
":ref:`dev-manual/start:checking out by tag in poky`" sections, respectively.
Once the local repository is created, you can change to that
- directory and check its status. Here, the single "master" branch
- exists on your system and by default, it is checked out::
+ directory and check its status. The ``master`` branch is checked out
+ by default::
$ cd poky
$ git status
diff --git a/poky/documentation/kernel-dev/advanced.rst b/poky/documentation/kernel-dev/advanced.rst
index b0d0385..0e745c3 100644
--- a/poky/documentation/kernel-dev/advanced.rst
+++ b/poky/documentation/kernel-dev/advanced.rst
@@ -21,7 +21,7 @@
grouped under the "Yocto Linux Kernel" heading in the
:yocto_git:`Yocto Project Source Repositories <>`.
-Kernel development tools ("kern-tools") exist also in the Yocto Project
+Kernel development tools ("kern-tools") are also available in the Yocto Project
Source Repositories under the "Yocto Linux Kernel" heading in the
``yocto-kernel-tools`` Git repository. The recipe that builds these
tools is ``meta/recipes-kernel/kern-tools/kern-tools-native_git.bb`` in
@@ -313,7 +313,7 @@
The description file can
include multiple patch statements where each statement handles a single
-patch. In the example ``build.scc`` file, five patch statements exist
+patch. In the example ``build.scc`` file, there are five patch statements
for the five patches in the directory.
You can create a typical ``.patch`` file using ``diff -Nurp`` or
@@ -509,8 +509,8 @@
example supports the "beaglebone" machine for the "standard" kernel and
the "arm" architecture.
-Be aware that a hard link between the ``KTYPE`` variable and a kernel
-type description file does not exist. Thus, if you do not have the
+Be aware that there is no hard link between the ``KTYPE`` variable and a kernel
+type description file. Thus, if you do not have the
kernel type defined in your kernel Metadata as it is here, you only need
to ensure that the
:term:`LINUX_KERNEL_TYPE`
@@ -776,8 +776,8 @@
lone "master" branch). It is situations like these that give rise to
multiple branches used within a Linux kernel sources Git repository.
-Repository organization strategies exist that maximize source reuse,
-remove redundancy, and logically order your changes. This section
+Here are repository organization strategies maximizing source reuse,
+removing redundancy, and logically ordering your changes. This section
presents strategies for the following cases:
- Encapsulating patches in a feature description and only including the
diff --git a/poky/documentation/kernel-dev/common.rst b/poky/documentation/kernel-dev/common.rst
index 3f35d84..f64cbab 100644
--- a/poky/documentation/kernel-dev/common.rst
+++ b/poky/documentation/kernel-dev/common.rst
@@ -338,7 +338,7 @@
the ``yocto-4.12`` branch.
The following commands show how to create a local copy of the
- ``yocto-kernel-cache`` and be in the ``yocto-4.12`` branch::
+ ``yocto-kernel-cache`` and switch to the ``yocto-4.12`` branch::
$ cd ~
$ git clone git://git.yoctoproject.org/yocto-kernel-cache --branch yocto-4.12
@@ -491,7 +491,7 @@
meta-yocto-bsp/recipes-kernel/linux/linux-yocto_4.12.bbappend
-The following listing shows the file. Be aware that the actual commit ID
+Here are the contents of this file. Be aware that the actual commit ID
strings in this example listing might be different than the actual
strings in the file from the ``meta-yocto-bsp`` layer upstream.
::
@@ -578,7 +578,7 @@
.. note::
- Other methods exist to accomplish grouping and defining configuration
+ There are other ways of grouping and defining configuration
options. For example, if you are working with a local clone of the
kernel repository, you could checkout the kernel's ``meta`` branch,
make your changes, and then push the changes to the local bare clone
@@ -589,8 +589,8 @@
In general, however, the Yocto Project maintainers take care of
moving the ``SRC_URI``-specified configuration options to the
- kernel's ``meta`` branch. Not only is it easier for BSP developers to
- not have to worry about putting those configurations in the branch,
+ kernel's ``meta`` branch. Not only is it easier for BSP developers
+ not to have to put those configurations in the branch,
but having the maintainers do it allows them to apply 'global'
knowledge about the kinds of common configuration options multiple
BSPs in the tree are typically using. This allows for promotion of
@@ -650,6 +650,15 @@
variable (search directories) to include the ``${PN}`` directory you
created to hold the configuration changes.
+You can also use a regular ``defconfig`` file, as generated by the
+:ref:`ref-tasks-savedefconfig`
+task instead of a complete ``.config`` file. This only specifies the
+non-default configuration values. You need to additionally set
+:term:`KCONFIG_MODE`
+in the linux-yocto ``.bbappend`` file in your layer::
+
+ KCONFIG_MODE = "alldefconfig"
+
.. note::
The build system applies the configurations from the ``defconfig``
@@ -772,8 +781,8 @@
.. note::
- During the checkout operation, a bug exists that could cause
- errors such as the following to appear:
+ During the checkout operation, there is a bug that could cause
+ errors such as the following:
.. code-block:: none
@@ -1297,7 +1306,7 @@
$ bitbake linux-yocto -c kernel_configme -f
This step ensures that you create a
- ``.config`` file from a known state. Because situations exist where
+ ``.config`` file from a known state. Because there are situations where
your build state might become unknown, it is best to run this task
prior to starting ``menuconfig``.
@@ -1527,7 +1536,7 @@
============================================
If you build a kernel image and the version string has a "+" or a
-"-dirty" at the end, uncommitted modifications exist in the kernel's
+"-dirty" at the end, it means there are uncommitted modifications in the kernel's
source directory. Follow these steps to clean up the version string:
1. *Discover the Uncommitted Changes:* Go to the kernel's locally cloned
@@ -1606,7 +1615,7 @@
Running the ``make defconfig`` command results in the default
configuration for your architecture as defined by your kernel.
- However, no guarantee exists that this configuration is valid for
+ However, there is no guarantee that this configuration is valid for
your use case, or that your board will even boot. This is
particularly true for non-x86 architectures.
diff --git a/poky/documentation/kernel-dev/concepts-appx.rst b/poky/documentation/kernel-dev/concepts-appx.rst
index 63e6731..cf2e75d 100644
--- a/poky/documentation/kernel-dev/concepts-appx.rst
+++ b/poky/documentation/kernel-dev/concepts-appx.rst
@@ -213,7 +213,7 @@
transparent and are not relevant to the developer on a day-to-day basis.
From the developer's perspective, this path is the "master" branch in
Git terms. The developer does not need to be aware of the existence of
-any other branches at all. Of course, value exists in the having these
+any other branches at all. Of course, it can make sense to have these
branches in the tree, should a person decide to explore them. For
example, a comparison between two BSPs at either the commit level or at
the line-by-line code ``diff`` level is now a trivial operation.
@@ -379,8 +379,7 @@
yocto-kernel-cache/ktypes/base/hardware.kcf
yocto-kernel-cache/bsp/qemu-ppc32/hardware.kcf
-The following list
-provides explanations for the various files:
+Here are explanations for the various files:
- ``hardware.kcf``: Specifies a list of kernel Kconfig files that
contain hardware options only.
diff --git a/poky/documentation/kernel-dev/faq.rst b/poky/documentation/kernel-dev/faq.rst
index 8169511..cffd1c4 100644
--- a/poky/documentation/kernel-dev/faq.rst
+++ b/poky/documentation/kernel-dev/faq.rst
@@ -7,7 +7,7 @@
Common Questions and Solutions
==============================
-The following lists some solutions for common questions.
+Here are some solutions for common questions.
How do I use my own Linux kernel ``.config`` file?
--------------------------------------------------
diff --git a/poky/documentation/kernel-dev/intro.rst b/poky/documentation/kernel-dev/intro.rst
index 5592f74..e406f6e 100644
--- a/poky/documentation/kernel-dev/intro.rst
+++ b/poky/documentation/kernel-dev/intro.rst
@@ -66,9 +66,9 @@
development of the Yocto Project.
If, instead, you have a very specific Linux kernel source tree and are
-unable to align with one of the official Yocto Linux kernel recipes, an
-alternative exists by which you can use the Yocto Project Linux kernel
-tools with your own kernel sources.
+unable to align with one of the official Yocto Linux kernel recipes,
+you have a way to use the Yocto Project Linux kernel tools with your
+own kernel sources.
The remainder of this manual provides instructions for completing
specific Linux kernel development tasks. These instructions assume you
diff --git a/poky/documentation/kernel-dev/maint-appx.rst b/poky/documentation/kernel-dev/maint-appx.rst
index f84ab6e..3354de5 100644
--- a/poky/documentation/kernel-dev/maint-appx.rst
+++ b/poky/documentation/kernel-dev/maint-appx.rst
@@ -175,7 +175,7 @@
Once you have cloned a Yocto Linux kernel repository and the cache
repository (``yocto-kernel-cache``) onto your development system, you
can consider the compilation phase of kernel development, which is
-building a kernel image. Some prerequisites exist that are validated by
+building a kernel image. Some prerequisites are validated by
the build process before compilation starts:
- The :term:`SRC_URI` points to the
@@ -194,7 +194,7 @@
In the previous example, the "yocto-4.12" branch is checked out in
the ``yocto-kernel-cache`` repository.
-The OpenEmbedded build system makes sure these conditions exist before
+The OpenEmbedded build system makes sure these conditions are satisfied before
attempting compilation. Other means, however, do exist, such as
bootstrapping a BSP.
diff --git a/poky/documentation/overview-manual/concepts.rst b/poky/documentation/overview-manual/concepts.rst
index 2e3f1af..e5bdcda 100644
--- a/poky/documentation/overview-manual/concepts.rst
+++ b/poky/documentation/overview-manual/concepts.rst
@@ -139,7 +139,7 @@
using a different layer where that metadata might be common across
several pieces of hardware.
-Many layers exist that work in the Yocto Project development environment. The
+There are many layers working in the Yocto Project development environment. The
:yocto_home:`Yocto Project Curated Layer Index </software-overview/layers/>`
and :oe_layerindex:`OpenEmbedded Layer Index <>` both contain layers from
which you can use or leverage.
@@ -370,7 +370,7 @@
layers the build system uses to further control the build. These layers
provide Metadata for the software, machine, and policies.
-In general, three types of layer input exists. You can see them below
+In general, there are three types of layer input. You can see them below
the "User Configuration" box in the `general workflow
figure <overview-manual/concepts:openembedded build system concepts>`:
@@ -427,8 +427,8 @@
.. note::
- Layers exist in the Yocto Project Source Repositories that cannot be
- found in the OpenEmbedded Layer Index. These layers are either
+ There are layers in the Yocto Project Source Repositories that cannot be
+ found in the OpenEmbedded Layer Index. Such layers are either
deprecated or experimental in nature.
BitBake uses the ``conf/bblayers.conf`` file, which is part of the user
@@ -489,7 +489,7 @@
The remainder of the layer is dedicated to specific recipes by function:
``recipes-bsp``, ``recipes-core``, ``recipes-graphics``,
-``recipes-kernel``, and so forth. Metadata can exist for multiple
+``recipes-kernel``, and so forth. There can be metadata for multiple
formfactors, graphics support systems, and so forth.
.. note::
@@ -528,9 +528,7 @@
keep source files in a repository controlled by a Source Control Manager
(SCM) such as Git. Pulling source from a repository allows you to
control the point in the repository (the revision) from which you want
-to build software. Finally, a combination of the two might exist, which
-would give the consumer a choice when deciding where to get source
-files.
+to build software. A combination of the two is also possible.
BitBake uses the :term:`SRC_URI`
variable to point to source files regardless of their location. Each
@@ -609,7 +607,7 @@
Source Mirror(s)
~~~~~~~~~~~~~~~~
-Two kinds of mirrors exist: pre-mirrors and regular mirrors. The
+There are two kinds of mirrors: pre-mirrors and regular mirrors. The
:term:`PREMIRRORS` and
:term:`MIRRORS` variables point to
these, respectively. BitBake checks pre-mirrors before looking upstream
@@ -667,8 +665,8 @@
variables are used, respectively.
- :term:`PACKAGE_ARCH`: Defines
- architecture-specific sub-folders. For example, packages could exist
- for the i586 or qemux86 architectures.
+ architecture-specific sub-folders. For example, packages could be
+ available for the i586 or qemux86 architectures.
BitBake uses the
:ref:`do_package_write_* <ref-tasks-package_write_deb>`
@@ -681,8 +679,8 @@
":ref:`ref-tasks-package_write_tar`"
sections in the Yocto Project Reference Manual for additional
information. As an example, consider a scenario where an IPK packaging
-manager is being used and package architecture support for both i586 and
-qemux86 exist. Packages for the i586 architecture are placed in
+manager is being used and there is package architecture support for both
+i586 and qemux86. Packages for the i586 architecture are placed in
``build/tmp/deploy/ipk/i586``, while packages for the qemux86
architecture are placed in ``build/tmp/deploy/ipk/qemux86``.
@@ -698,7 +696,7 @@
.. note::
- Separate documentation exists for the BitBake tool. See the
+ Documentation for the BitBake tool is available separately. See the
BitBake User Manual
for reference material on BitBake.
@@ -783,12 +781,10 @@
.. note::
- In the previous figure, notice that two sample hierarchies exist: one
- based on package architecture (i.e.
- PACKAGE_ARCH
- ) and one based on a machine (i.e.
- MACHINE
- ). The underlying structures are identical. The differentiator being
+ In the previous figure, notice that there are two sample hierarchies:
+ one based on package architecture (i.e. :term:`PACKAGE_ARCH`)
+ and one based on a machine (i.e. :term:`MACHINE`).
+ The underlying structures are identical. The differentiator being
what the OpenEmbedded build system is using as a build target (e.g.
general architecture, a build host, an SDK, or a specific machine).
@@ -963,8 +959,7 @@
.. note::
- Support for creating feeds directly from the
- deploy/\*
+ Support for creating feeds directly from the ``deploy/*``
directories does not exist. Creating such feeds usually requires some
kind of feed maintenance mechanism that would upload the new packages
into an official package feed (e.g. the Ångström distribution). This
@@ -1156,9 +1151,9 @@
OpenEmbedded.
To determine if a task needs to be rerun, BitBake checks if a stamp file
-with a matching input checksum exists for the task. If such a stamp file
-exists, the task's output is assumed to exist and still be valid. If the
-file does not exist, the task is rerun.
+with a matching input checksum exists for the task. In this case,
+the task's output is assumed to exist and still be valid. Otherwise,
+the task is rerun.
.. note::
@@ -1234,14 +1229,14 @@
It becomes more complicated if everything can come from an sstate cache
because some objects are simply not required at all. For example, you do
-not need a compiler or native tools, such as quilt, if nothing exists to
-compile or patch. If the ``do_package_write_*`` packages are available
+not need a compiler or native tools, such as quilt, if there isn't anything
+to compile or patch. If the ``do_package_write_*`` packages are available
from sstate, BitBake does not need the ``do_package`` task data.
To handle all these complexities, BitBake runs in two phases. The first
is the "setscene" stage. During this stage, BitBake first checks the
sstate cache for any targets it is planning to build. BitBake does a
-fast check to see if the object exists rather than a complete download.
+fast check to see if the object exists rather than doing a complete download.
If nothing exists, the second phase, which is the setscene stage,
completes and the main build proceeds.
@@ -1366,9 +1361,9 @@
All the output files for an SDK are written to the ``deploy/sdk`` folder
inside the :term:`Build Directory` as
-shown in the previous figure. Depending on the type of SDK, several
-variables exist that help configure these files. The following list
-shows the variables associated with an extensible SDK:
+shown in the previous figure. Depending on the type of SDK, there are
+several variables to configure these files. Here are the variables
+associated with an extensible SDK:
- :term:`DEPLOY_DIR`: Points to
the ``deploy`` directory.
@@ -1577,8 +1572,8 @@
By design, the OpenEmbedded build system builds everything from scratch
unless :term:`BitBake` can determine
that parts do not need to be rebuilt. Fundamentally, building from
-scratch is attractive as it means all parts are built fresh and no
-possibility of stale data exists that can cause problems. When
+scratch is attractive as it means all parts are built fresh and there is
+no possibility of stale data that can cause problems. When
developers hit problems, they typically default back to building from
scratch so they have a know state from the start.
@@ -1617,7 +1612,7 @@
- The build system does not maintain
:term:`PR` information as part of
- the shared state packages. Consequently, considerations exist that
+ the shared state packages. Consequently, there are considerations that
affect maintaining shared state feeds. For information on how the
build system works with packages and can track incrementing ``PR``
information, see the ":ref:`dev-manual/common-tasks:automatically incrementing a package version number`"
@@ -1687,7 +1682,7 @@
alleviating this problem and making the "run" scripts much more readable
as a bonus.
-So far, solutions for shell scripts exist. What about Python tasks? The
+So far, there are solutions for shell scripts. What about Python tasks? The
same approach applies even though these tasks are more difficult. The
process needs to figure out what variables a Python function accesses
and what functions it calls. Again, the incremental build solution
@@ -1695,7 +1690,7 @@
dependencies, and then creates a checksum for the data used as the input
to the task.
-Like the ``WORKDIR`` case, situations exist where dependencies should be
+Like the ``WORKDIR`` case, there can be situations where dependencies should be
ignored. For these situations, you can instruct the build process to
ignore a dependency by using a line like the following::
@@ -1732,7 +1727,7 @@
checksum that combines the basehash and the hashes of the task's
dependencies.
-At the code level, a variety of ways exist by which both the basehash
+At the code level, there are multiple ways by which both the basehash
and the dependent task hashes can be influenced. Within the BitBake
configuration file, you can give BitBake some extra information to help
it construct the basehash. The following statement effectively results
@@ -1961,8 +1956,8 @@
The OpenEmbedded build system automatically adds common types of runtime
dependencies between packages, which means that you do not need to
explicitly declare the packages using
-:term:`RDEPENDS`. Three automatic
-mechanisms exist (``shlibdeps``, ``pcdeps``, and ``depchains``) that
+:term:`RDEPENDS`. There are three automatic
+mechanisms (``shlibdeps``, ``pcdeps``, and ``depchains``) that
handle shared libraries, package configuration (pkg-config) modules, and
``-dev`` and ``-dbg`` packages, respectively. For other types of runtime
dependencies, you must manually declare the dependencies.
diff --git a/poky/documentation/overview-manual/development-environment.rst b/poky/documentation/overview-manual/development-environment.rst
index 1decf01..ab155dc 100644
--- a/poky/documentation/overview-manual/development-environment.rst
+++ b/poky/documentation/overview-manual/development-environment.rst
@@ -71,7 +71,7 @@
the Yocto Project Development Tasks Manual.
If your development host is going to be a system that runs a Linux
-distribution, steps still exist that you must take to prepare the system
+distribution, you must still take steps to prepare the system
for use with the Yocto Project. You need to be sure that the Linux
distribution on the system is one that supports the Yocto Project. You
also need to be sure that the correct set of host packages are installed
@@ -80,8 +80,8 @@
":ref:`dev-manual/start:setting up a native linux host`"
section in the Yocto Project Development Tasks Manual.
-Once your development host is set up to use the Yocto Project, several
-methods exist for you to do work in the Yocto Project environment:
+Once your development host is set up to use the Yocto Project, there
+are several ways of working in the Yocto Project environment:
- *Command Lines, BitBake, and Shells:* Traditional development in the
Yocto Project involves using the :term:`OpenEmbedded Build System`,
@@ -271,7 +271,7 @@
All this work is done locally on the development host before anything is
pushed to a "contrib" area and examined at the maintainer's level.
-A somewhat formal method exists by which developers commit changes and
+There is a somewhat formal method by which developers commit changes and
push them into the "contrib" area and subsequently request that the
maintainer include them into an upstream branch. This process is called
"submitting a patch" or "submitting a change." For information on
@@ -279,9 +279,9 @@
":ref:`dev-manual/common-tasks:submitting a change to the yocto project`"
section in the Yocto Project Development Tasks Manual.
-In summary, a single point of entry exists for changes into a "master"
+In summary, there is a single point of entry for changes into a "master"
or development branch of the Git repository, which is controlled by the
-project's maintainer. And, a set of developers exist who independently
+project's maintainer. A set of developers independently
develop, test, and submit changes to "contrib" areas for the maintainer
to examine. The maintainer then chooses which changes are going to
become a permanent part of the project.
diff --git a/poky/documentation/overview-manual/intro.rst b/poky/documentation/overview-manual/intro.rst
index a2afe77..a809177 100644
--- a/poky/documentation/overview-manual/intro.rst
+++ b/poky/documentation/overview-manual/intro.rst
@@ -12,7 +12,7 @@
best-known-methods (BKMs), and any other high-level introductory
information suitable for a new Yocto Project user.
-The following list describes what you can get from this manual:
+Here is what you can get from this manual:
- :ref:`overview-manual/yp-intro:introducing the yocto project`\ *:*
This chapter provides an introduction to the Yocto Project. You will learn
diff --git a/poky/documentation/overview-manual/yp-intro.rst b/poky/documentation/overview-manual/yp-intro.rst
index fca02e4..28ed079 100644
--- a/poky/documentation/overview-manual/yp-intro.rst
+++ b/poky/documentation/overview-manual/yp-intro.rst
@@ -38,8 +38,7 @@
Features
--------
-The following list describes features and advantages of the Yocto
-Project:
+Here are features and advantages of the Yocto Project:
- *Widely Adopted Across the Industry:* Many semiconductor, operating
system, software, and service vendors adopt and support the Yocto
@@ -137,13 +136,11 @@
Challenges
----------
-The following list presents challenges you might encounter when
-developing using the Yocto Project:
+Here are challenges you might encounter when developing using the Yocto Project:
- *Steep Learning Curve:* The Yocto Project has a steep learning curve
and has many different ways to accomplish similar tasks. It can be
- difficult to choose how to proceed when varying methods exist by
- which to accomplish a given task.
+ difficult to choose between such ways.
- *Understanding What Changes You Need to Make For Your Design Requires
Some Research:* Beyond the simple tutorial stage, understanding what
@@ -158,7 +155,7 @@
workflow <overview-manual/development-environment:the yocto project development environment>`
could be confusing if you are used to traditional desktop and server
software development.
- In a desktop development environment, mechanisms exist to easily pull
+ In a desktop development environment, there are mechanisms to easily pull
and install new packages, which are typically pre-compiled binaries
from servers accessible over the Internet. Using the Yocto Project,
you must modify your configuration and rebuild to add additional
@@ -292,8 +289,8 @@
Development Tools
-----------------
-The following list consists of tools that help you develop images and
-applications using the Yocto Project:
+Here are tools that help you develop images and applications using
+the Yocto Project:
- *CROPS:* `CROPS <https://github.com/crops/poky-container/>`__ is an
open source, cross-platform development framework that leverages
@@ -347,8 +344,8 @@
Production Tools
----------------
-The following list consists of tools that help production related
-activities using the Yocto Project:
+Here are tools that help with production related activities using the
+Yocto Project:
- *Auto Upgrade Helper:* This utility when used in conjunction with the
:term:`OpenEmbedded Build System`
@@ -432,8 +429,8 @@
require system administrator privileges. For example, file ownership
or permissions might need to be defined. Pseudo is a tool that you
can either use directly or through the environment variable
- ``LD_PRELOAD``. Either method allows these operations to succeed as
- if system administrator privileges exist even when they do not.
+ ``LD_PRELOAD``. Either method allows these operations to succeed
+ even without system administrator privileges.
Thanks to Pseudo, the Yocto Project never needs root privileges to
build images for your target system.
@@ -444,8 +441,7 @@
Open-Embedded Build System Components
-------------------------------------
-The following list consists of components associated with the
-:term:`OpenEmbedded Build System`:
+Here are components associated with the :term:`OpenEmbedded Build System`:
- *BitBake:* BitBake is a core component of the Yocto Project and is
used by the OpenEmbedded build system to build images. While BitBake
@@ -511,8 +507,7 @@
Packages for Finished Targets
-----------------------------
-The following lists components associated with packages for finished
-targets:
+Here are components associated with packages for finished targets:
- *Matchbox:* Matchbox is an Open Source, base environment for the X
Window System running on non-desktop, embedded platforms such as
@@ -583,8 +578,7 @@
This section provides an introduction to the choices or development
methods you have when setting up your Build Host. Depending on your
particular workflow preference and the type of operating system your
-Build Host runs, several choices exist that allow you to use the Yocto
-Project.
+Build Host runs, you have several choices.
.. note::
@@ -794,7 +788,7 @@
================
It helps to understand some basic fundamental terms when learning the
-Yocto Project. Although a list of terms exists in the ":doc:`Yocto Project
+Yocto Project. Although there is a list of terms in the ":doc:`Yocto Project
Terms </ref-manual/terms>`" section of the Yocto Project
Reference Manual, this section provides the definitions of some terms
helpful for getting started:
diff --git a/poky/documentation/poky.yaml b/poky/documentation/poky.yaml
index 22706a0..3bfc35b 100644
--- a/poky/documentation/poky.yaml
+++ b/poky/documentation/poky.yaml
@@ -1,12 +1,12 @@
-DISTRO : "3.3"
+DISTRO : "3.3.1"
DISTRO_NAME_NO_CAP : "hardknott"
DISTRO_NAME : "Hardknott"
DISTRO_NAME_NO_CAP_MINUS_ONE : "gatesgarth"
DISTRO_NAME_NO_CAP_LTS : "dunfell"
-YOCTO_DOC_VERSION : "3.3"
-YOCTO_DOC_VERSION_MINUS_ONE : "3.2.3"
-DISTRO_REL_TAG : "yocto-3.3"
-POKYVERSION : "25.0.0"
+YOCTO_DOC_VERSION : "3.3.1"
+YOCTO_DOC_VERSION_MINUS_ONE : "3.2.4"
+DISTRO_REL_TAG : "yocto-3.3.1"
+POKYVERSION : "25.0.1"
YOCTO_POKY : "poky-&DISTRO_NAME_NO_CAP;-&POKYVERSION;"
YOCTO_DL_URL : "https://downloads.yoctoproject.org"
YOCTO_AB_URL : "https://autobuilder.yoctoproject.org"
@@ -19,7 +19,8 @@
diffutils diffstat git cpp gcc gcc-c++ glibc-devel texinfo chrpath \
ccache perl-Data-Dumper perl-Text-ParseWords perl-Thread-Queue perl-bignum socat \
python3-pexpect findutils which file cpio python python3-pip xz python3-GitPython \
- python3-jinja2 SDL-devel xterm rpcgen mesa-libGL-devel"
+ python3-jinja2 SDL-devel xterm rpcgen mesa-libGL-devel perl-FindBin perl-File-Compare \
+ perl-File-Copy perl-locale"
OPENSUSE_HOST_PACKAGES_ESSENTIAL : "python gcc gcc-c++ git chrpath make wget python-xml \
diffstat makeinfo python-curses patch socat python3 python3-curses tar python3-pip \
python3-pexpect xz which python3-Jinja2 Mesa-libEGL1 libSDL-devel xterm rpcgen Mesa-dri-devel
diff --git a/poky/documentation/ref-manual/classes.rst b/poky/documentation/ref-manual/classes.rst
index 9a1fc2c..6dd0cbb 100644
--- a/poky/documentation/ref-manual/classes.rst
+++ b/poky/documentation/ref-manual/classes.rst
@@ -1006,10 +1006,10 @@
INSANE_SKIP_${PN} += "dev-so"
Please keep in mind that the QA checks
-exist in order to detect real or potential problems in the packaged
+are meant to detect real or potential problems in the packaged
output. So exercise caution when disabling these checks.
-The following list shows the tests you can list with the ``WARN_QA`` and
+Here are the tests you can list with the ``WARN_QA`` and
``ERROR_QA`` variables:
- ``already-stripped:`` Checks that produced binaries have not
@@ -1085,8 +1085,8 @@
- ``dev-so:`` Checks that the ``.so`` symbolic links are in the
``-dev`` package and not in any of the other packages. In general,
these symlinks are only useful for development purposes. Thus, the
- ``-dev`` package is the correct location for them. Some very rare
- cases do exist for dynamically loaded modules where these symlinks
+ ``-dev`` package is the correct location for them. In very rare
+ cases, such as dynamically loaded modules, these symlinks
are needed instead in the main package.
- ``file-rdeps:`` Checks that file-level dependencies identified by
@@ -1260,8 +1260,8 @@
.. note::
- If you are not using runtime package management on your target
- system, then you do not need to worry about this situation.
+ This is only relevant when you are using runtime package management
+ on your target system.
- ``xorg-driver-abi:`` Checks that all packages containing Xorg
drivers have ABI dependencies. The ``xserver-xorg`` recipe provides
@@ -1676,7 +1676,7 @@
nativesdk-myrecipe.bb
- Not doing so can lead to subtle problems because code exists that
+ Not doing so can lead to subtle problems because there is code that
depends on the naming convention.
Although applied differently, the ``nativesdk`` class is used with both
@@ -1714,10 +1714,10 @@
``oelint.bbclass``
==================
-The ``oelint`` class is an obsolete lint checking tool that exists in
+The ``oelint`` class is an obsolete lint checking tool available in
``meta/classes`` in the :term:`Source Directory`.
-A number of classes exist that could be generally useful in OE-Core but
+There are some classes that could be generally useful in OE-Core but
are never actually used within OE-Core itself. The ``oelint`` class is
one such example. However, being aware of this class can reduce the
proliferation of different versions of similar classes across multiple
diff --git a/poky/documentation/ref-manual/devtool-reference.rst b/poky/documentation/ref-manual/devtool-reference.rst
index 0ce3219..1862c48 100644
--- a/poky/documentation/ref-manual/devtool-reference.rst
+++ b/poky/documentation/ref-manual/devtool-reference.rst
@@ -403,8 +403,8 @@
As software matures, upstream recipes are upgraded to newer versions. As
a developer, you need to keep your local recipes up-to-date with the
-upstream version releases. Several methods exist by which you can
-upgrade recipes. You can read about them in the ":ref:`dev-manual/common-tasks:upgrading recipes`"
+upstream version releases. There are several ways of upgrading recipes.
+You can read about them in the ":ref:`dev-manual/common-tasks:upgrading recipes`"
section of the Yocto Project Development Tasks Manual. This section
overviews the ``devtool upgrade`` command.
@@ -516,8 +516,8 @@
should never use it to update an image that will be used in
production.
-Some conditions exist that could prevent a deployed application from
-behaving as expected. When both of the following conditions exist, your
+Some conditions could prevent a deployed application from
+behaving as expected. When both of the following conditions are met, your
application has the potential to not behave correctly when run on the
target:
@@ -528,7 +528,7 @@
- The target does not physically have the packages on which the
application depends installed.
-If both of these conditions exist, your application will not behave as
+If both of these conditions are met, your application will not behave as
expected. The reason for this misbehavior is because the
``devtool deploy-target`` command does not deploy the packages (e.g.
libraries) on which your new application depends. The assumption is that
diff --git a/poky/documentation/ref-manual/faq.rst b/poky/documentation/ref-manual/faq.rst
index e7bca82..f1b564a 100644
--- a/poky/documentation/ref-manual/faq.rst
+++ b/poky/documentation/ref-manual/faq.rst
@@ -312,7 +312,7 @@
can use ``file://`` URLs to point to local directories or network shares
as well.
-Aside from the previous technique, these options also exist::
+Here are other options::
BB_NO_NETWORK = "1"
diff --git a/poky/documentation/ref-manual/features.rst b/poky/documentation/ref-manual/features.rst
index eb4947d..31d24b8 100644
--- a/poky/documentation/ref-manual/features.rst
+++ b/poky/documentation/ref-manual/features.rst
@@ -196,7 +196,7 @@
utilities or packages with debug information needed to investigate
application problems or profile applications.
-The following image features are available for all images:
+Here are the image features available for all images:
- *allow-empty-password:* Allows Dropbear and OpenSSH to accept root
logins and logins from accounts having an empty password string.
diff --git a/poky/documentation/ref-manual/kickstart.rst b/poky/documentation/ref-manual/kickstart.rst
index 843292b..8308fff 100644
--- a/poky/documentation/ref-manual/kickstart.rst
+++ b/poky/documentation/ref-manual/kickstart.rst
@@ -210,5 +210,5 @@
- ``--configfile``: Specifies a user-defined configuration file for
the bootloader. You can provide a full pathname for the file or a
- file that exists in the ``canned-wks`` folder. This option overrides
+ file located in the ``canned-wks`` folder. This option overrides
all other bootloader options.
diff --git a/poky/documentation/ref-manual/migration-2.2.rst b/poky/documentation/ref-manual/migration-2.2.rst
index a9d3cde..a60ce8d 100644
--- a/poky/documentation/ref-manual/migration-2.2.rst
+++ b/poky/documentation/ref-manual/migration-2.2.rst
@@ -422,7 +422,7 @@
:term:`SRCREV` by default when fetching from a Git
repository. You can override this in either case to use
``${``\ :term:`AUTOREV`\ ``}`` instead by using the
- ``-a`` or ``DASHDASHautorev`` command-line option
+ ``-a`` or ``--autorev`` command-line option
- ``distcc``: GTK+ UI is now disabled by default.
diff --git a/poky/documentation/ref-manual/qa-checks.rst b/poky/documentation/ref-manual/qa-checks.rst
index 9cc4c57..2e98713 100644
--- a/poky/documentation/ref-manual/qa-checks.rst
+++ b/poky/documentation/ref-manual/qa-checks.rst
@@ -97,7 +97,7 @@
- ``<packagename1> rdepends on <packagename2>, but it isn't a build dependency? [build-deps]``
- A runtime dependency exists between the two specified packages, but
+ There is a runtime dependency between the two specified packages, but
there is nothing explicit within the recipe to enable the
OpenEmbedded build system to ensure that dependency is satisfied.
This condition is usually triggered by an
@@ -303,7 +303,7 @@
- ``<packagename> rdepends on <debug_packagename> [debug-deps]``
- A dependency exists between the specified non-dbg package (i.e. a
+ There is a dependency between the specified non-dbg package (i.e. a
package whose name does not end in ``-dbg``) and a package that is a
``dbg`` package. The ``dbg`` packages contain debug symbols and are
brought in using several different methods:
@@ -326,7 +326,7 @@
- ``<packagename> rdepends on <dev_packagename> [dev-deps]``
- A dependency exists between the specified non-dev package (a package
+ There is a dependency between the specified non-dev package (a package
whose name does not end in ``-dev``) and a package that is a ``dev``
package. The ``dev`` packages contain development headers and are
usually brought in using several different methods:
@@ -753,6 +753,6 @@
.. note::
- Please keep in mind that the QA checks exist in order to detect real
+ Please keep in mind that the QA checks are meant to detect real
or potential problems in the packaged output. So exercise caution
when disabling these checks.
diff --git a/poky/documentation/ref-manual/release-process.rst b/poky/documentation/ref-manual/release-process.rst
index 93ab6ed..935a2e3 100644
--- a/poky/documentation/ref-manual/release-process.rst
+++ b/poky/documentation/ref-manual/release-process.rst
@@ -82,14 +82,14 @@
bug fixes and security fixes only. Policy dictates that features are
not backported to a stable release. This policy means generic recipe
version upgrades are unlikely to be accepted for backporting. The
- exception to this policy occurs when a strong reason exists such as
+ exception to this policy occurs when there is a strong reason such as
the fix happens to also be the preferred upstream approach.
Stable release branches have strong maintenance for about a year after
their initial release. Should significant issues be found for any
release regardless of its age, fixes could be backported to older
releases. For issues that are not backported given an older release,
-Community LTS trees and branches exist where community members share
+Community LTS trees and branches allow community members to share
patches for older releases. However, these types of patches do not go
through the same release process as do point releases. You can find more
information about stable branch maintenance at
diff --git a/poky/documentation/ref-manual/resources.rst b/poky/documentation/ref-manual/resources.rst
index 663f0d9..5ffd2b3 100644
--- a/poky/documentation/ref-manual/resources.rst
+++ b/poky/documentation/ref-manual/resources.rst
@@ -10,7 +10,7 @@
============
The Yocto Project team is happy for people to experiment with the Yocto
-Project. A number of places exist to find help if you run into
+Project. There is a number of places where you can find help if you run into
difficulties or find bugs. This presents information about contributing
and participating in the Yocto Project.
@@ -43,8 +43,7 @@
component of the build system that acts contrary to the documentation or
your expectations).
-A general procedure and guidelines exist for when you use Bugzilla to
-submit a bug. For information on how to use Bugzilla to submit a bug
+For a general procedure and guidelines on how to use Bugzilla to submit a bug
against the Yocto Project, see the following:
- The ":ref:`dev-manual/common-tasks:submitting a defect against the yocto project`"
@@ -59,7 +58,7 @@
Mailing lists
=============
-A number of mailing lists maintained by the Yocto Project exist as well
+There are multiple mailing lists maintained by the Yocto Project as well
as related OpenEmbedded mailing lists for discussion, patch submission
and announcements. To subscribe to one of the following mailing lists,
click on the appropriate URL in the following list and follow the
@@ -156,9 +155,8 @@
- :yocto_docs:`Yocto Project Mega-Manual </singleindex.html>`\ *:* This manual
is simply a single HTML file comprised of the bulk of the Yocto
- Project manuals. The Mega-Manual primarily exists as a vehicle by
- which you can easily search for phrases and terms used in the Yocto
- Project documentation set.
+ Project manuals. It makes it easy to search for phrases and terms used
+ in the Yocto Project documentation set.
- :doc:`/profile-manual/index` *:* This manual presents a set of
common and generally useful tracing and profiling schemes along with
diff --git a/poky/documentation/ref-manual/structure.rst b/poky/documentation/ref-manual/structure.rst
index f8dc7d2..36c9efc 100644
--- a/poky/documentation/ref-manual/structure.rst
+++ b/poky/documentation/ref-manual/structure.rst
@@ -38,7 +38,7 @@
project. BitBake, a :term:`Metadata` interpreter, reads the
Yocto Project Metadata and runs the tasks defined by that data. Failures
are usually caused by errors in your Metadata and not from BitBake
-itself; consequently, most users do not need to worry about BitBake.
+itself.
When you run the ``bitbake`` command, the main BitBake executable (which
resides in the ``bitbake/bin/`` directory) starts. Sourcing the
@@ -279,7 +279,7 @@
.. note::
You can see how the ``TEMPLATECONF`` variable is used by looking at the
- ``scripts/oe-setup-builddir``` script in the :term:`Source Directory`.
+ ``scripts/oe-setup-builddir`` script in the :term:`Source Directory`.
You can find the Yocto Project version of the ``local.conf.sample`` file in
the ``meta-poky/conf`` directory.
@@ -510,8 +510,8 @@
-----------------------
Previous versions of the OpenEmbedded build system used to create a
-global shared sysroot per machine along with a native sysroot. Beginning
-with the 2.3 version of the Yocto Project, sysroots exist in
+global shared sysroot per machine along with a native sysroot. Since
+the 2.3 version of the Yocto Project, there are sysroots in
recipe-specific :term:`WORKDIR` directories. Thus, the
``build/tmp/sysroots/`` directory is unused.
@@ -601,7 +601,7 @@
name, and the version of the recipe (i.e.
:term:`PE`\ ``:``\ :term:`PV`\ ``-``\ :term:`PR`).
-A number of key subdirectories exist within each recipe work directory:
+Here are key subdirectories within each recipe work directory:
- ``${WORKDIR}/temp``: Contains the log files of each task executed for
this recipe, the "run" files for each executed task, which contain
@@ -624,7 +624,7 @@
- ``${WORKDIR}/packages-split``: Contains the output of the
``do_package`` task after the output has been split into individual
- packages. Subdirectories exist for each individual package created by
+ packages. There are subdirectories for each individual package created by
the recipe.
- ``${WORKDIR}/recipe-sysroot``: A directory populated with the target
@@ -783,7 +783,7 @@
This directory contains non-essential applications that add features
compared to the alternatives in core. You might need this directory for
-full tool functionality or for Linux Standard Base (LSB) compliance.
+full tool functionality.
.. _structure-meta-recipes-gnome:
@@ -809,14 +809,6 @@
This directory contains the kernel and generic applications and
libraries that have strong kernel dependencies.
-.. _structure-meta-recipes-lsb4:
-
-``meta/recipes-lsb4/``
-----------------------
-
-This directory contains recipes specifically added to support the Linux
-Standard Base (LSB) version 4.x.
-
.. _structure-meta-recipes-multimedia:
``meta/recipes-multimedia/``
diff --git a/poky/documentation/ref-manual/system-requirements.rst b/poky/documentation/ref-manual/system-requirements.rst
index 4fa4d3e..e9d995c 100644
--- a/poky/documentation/ref-manual/system-requirements.rst
+++ b/poky/documentation/ref-manual/system-requirements.rst
@@ -41,7 +41,7 @@
- Ubuntu 18.04 (LTS)
-- Ubuntu 20.04
+- Ubuntu 20.04 (LTS)
- Fedora 30
@@ -66,9 +66,8 @@
- While the Yocto Project Team attempts to ensure all Yocto Project
releases are one hundred percent compatible with each officially
- supported Linux distribution, instances might exist where you
- encounter a problem while using the Yocto Project on a specific
- distribution.
+ supported Linux distribution, you may still encounter problems
+ that happen only with a specific distribution.
- Yocto Project releases are tested against the stable Linux
distributions in the above list. The Yocto Project should work
@@ -111,7 +110,7 @@
Ubuntu and Debian
-----------------
-The following list shows the required packages by function given a
+Here are the required packages by function given a
supported Ubuntu or Debian Linux distribution:
.. note::
@@ -119,8 +118,7 @@
- If your build system has the ``oss4-dev`` package installed, you
might experience QEMU build failures due to the package installing
its own custom ``/usr/include/linux/soundcard.h`` on the Debian
- system. If you run into this situation, either of the following
- solutions exist::
+ system. If you run into this situation, try either of these solutions::
$ sudo apt-get build-dep qemu
$ sudo apt-get remove oss4-dev
@@ -150,7 +148,7 @@
Fedora Packages
---------------
-The following list shows the required packages by function given a
+Here are the required packages by function given a
supported Fedora Linux distribution:
- *Essentials:* Packages needed to build an image for a headless
@@ -167,7 +165,7 @@
openSUSE Packages
-----------------
-The following list shows the required packages by function given a
+Here are the required packages by function given a
supported openSUSE Linux distribution:
- *Essentials:* Packages needed to build an image for a headless
@@ -185,7 +183,7 @@
CentOS-7 Packages
-----------------
-The following list shows the required packages by function given a
+Here are the required packages by function given a
supported CentOS-7 Linux distribution:
- *Essentials:* Packages needed to build an image for a headless
@@ -212,7 +210,7 @@
CentOS-8 Packages
-----------------
-The following list shows the required packages by function given a
+Here are the required packages by function given a
supported CentOS-8 Linux distribution:
- *Essentials:* Packages needed to build an image for a headless
diff --git a/poky/documentation/ref-manual/tasks.rst b/poky/documentation/ref-manual/tasks.rst
index 001edf6..5bceb79 100644
--- a/poky/documentation/ref-manual/tasks.rst
+++ b/poky/documentation/ref-manual/tasks.rst
@@ -823,6 +823,5 @@
After the kernel is unpacked but before it is patched, this task makes
sure that the machine and metadata branches as specified by the
:term:`SRCREV` variables actually exist on the specified
-branches. If these branches do not exist and
-:term:`AUTOREV` is not being used, the
+branches. Otherwise, if :term:`AUTOREV` is not being used, the
``do_validate_branches`` task fails during the build.
diff --git a/poky/documentation/ref-manual/variables.rst b/poky/documentation/ref-manual/variables.rst
index c339d45..df6413b 100644
--- a/poky/documentation/ref-manual/variables.rst
+++ b/poky/documentation/ref-manual/variables.rst
@@ -49,10 +49,9 @@
alternatives system to create a different binary naming scheme so the
commands can co-exist.
- To use the variable, list out the package's commands that also exist
- as part of another package. For example, if the ``busybox`` package
- has four commands that also exist as part of another package, you
- identify them as follows::
+ To use the variable, list out the package's commands that are also
+ provided by another package. For example, if the ``busybox`` package
+ has four such commands, you identify them as follows::
ALTERNATIVE_busybox = "sh sed test bracket"
@@ -306,8 +305,8 @@
variable), the OpenEmbedded build system ignores your request and
will install the packages to avoid dependency errors.
- Support for this variable exists only when using the IPK and RPM
- packaging backend. Support does not exist for DEB.
+ This variable is supported only when using the IPK and RPM
+ packaging backends. DEB is not supported.
See the :term:`NO_RECOMMENDATIONS` and the
:term:`PACKAGE_EXCLUDE` variables for related
@@ -336,8 +335,8 @@
- This host list is only used if ``BB_NO_NETWORK`` is either not set
or set to "0".
- - Limited support for wildcard matching against the beginning of
- host names exists. For example, the following setting matches
+ - There is limited support for wildcard matching against the beginning of
+ host names. For example, the following setting matches
``git.gnu.org``, ``ftp.gnu.org``, and ``foo.git.gnu.org``.
::
@@ -558,7 +557,7 @@
:term:`BBCLASSEXTEND`
Allows you to extend a recipe so that it builds variants of the
- software. Common variants for recipes exist such as "natives" like
+ software. There are common variants for recipes as "natives" like
``quilt-native``, which is a copy of Quilt built to run on the build
system; "crosses" such as ``gcc-cross``, which is a compiler built to
run on the build machine but produces binaries that run on the target
@@ -1237,7 +1236,7 @@
CONFFILES_${PN} += "${sysconfdir}/file1 \
${sysconfdir}/file2 ${sysconfdir}/file3"
- A relationship exists between the ``CONFFILES`` and ``FILES``
+ There is a relationship between the ``CONFFILES`` and ``FILES``
variables. The files listed within ``CONFFILES`` must be a subset of
the files listed within ``FILES``. Because the configuration files
you provide with ``CONFFILES`` are simply being identified so that
@@ -1417,8 +1416,8 @@
:term:`COREBASE_FILES`
Lists files from the :term:`COREBASE` directory that
should be copied other than the layers listed in the
- ``bblayers.conf`` file. The ``COREBASE_FILES`` variable exists for
- the purpose of copying metadata from the OpenEmbedded build system
+ ``bblayers.conf`` file. The ``COREBASE_FILES`` variable allows
+ to copy metadata from the OpenEmbedded build system
into the extensible SDK.
Explicitly listing files in ``COREBASE`` is needed because it
@@ -1525,10 +1524,10 @@
:term:`DEBUG_BUILD`
Specifies to build packages with debugging information. This
- influences the value of the ``SELECTED_OPTIMIZATION`` variable.
+ influences the value of the :term:`SELECTED_OPTIMIZATION` variable.
:term:`DEBUG_OPTIMIZATION`
- The options to pass in ``TARGET_CFLAGS`` and ``CFLAGS`` when
+ The options to pass in :term:`TARGET_CFLAGS` and :term:`CFLAGS` when
compiling a system for debugging. This variable defaults to "-O
-fno-omit-frame-pointer ${DEBUG_FLAGS} -pipe".
@@ -1538,7 +1537,7 @@
The most common usage of this is variable is to set it to "-1" within
a recipe for a development version of a piece of software. Using the
variable in this way causes the stable version of the recipe to build
- by default in the absence of ``PREFERRED_VERSION`` being used to
+ by default in the absence of :term:`PREFERRED_VERSION` being used to
build the development version.
.. note::
@@ -2460,8 +2459,8 @@
``FILESEXTRAPATHS`` variable.
You can take advantage of this searching behavior in useful ways. For
- example, consider a case where the following directory structure
- exists for general and machine-specific configurations::
+ example, consider a case where there is the following directory structure
+ for general and machine-specific configurations::
files/defconfig
files/MACHINEA/defconfig
@@ -2579,7 +2578,7 @@
Set the variable to "1" to force the removal of these packages.
:term:`FULL_OPTIMIZATION`
- The options to pass in ``TARGET_CFLAGS`` and ``CFLAGS`` when
+ The options to pass in :term:`TARGET_CFLAGS` and :term:`CFLAGS` when
compiling an optimized system. This variable defaults to "-O2 -pipe
${DEBUG_FLAGS}".
@@ -3013,8 +3012,8 @@
Image recipes set ``IMAGE_INSTALL`` to specify the packages to
install into an image through ``image.bbclass``. Additionally,
- "helper" classes such as the
- :ref:`core-image <ref-classes-core-image>` class exist that can
+ there are "helper" classes such as the
+ :ref:`core-image <ref-classes-core-image>` class which can
take lists used with ``IMAGE_FEATURES`` and turn them into
auto-generated entries in ``IMAGE_INSTALL`` in addition to its
default contents.
@@ -3465,8 +3464,8 @@
Use of the ``INHIBIT_SYSROOT_STRIP`` variable occurs in rare and
special circumstances. For example, suppose you are building
bare-metal firmware by using an external GCC toolchain. Furthermore,
- even if the toolchain's binaries are strippable, other files exist
- that are needed for the build that are not strippable.
+ even if the toolchain's binaries are strippable, there are other files
+ needed for the build that are not strippable.
:term:`INITRAMFS_FSTYPES`
Defines the format for the output image of an initial RAM filesystem
@@ -3745,6 +3744,44 @@
":ref:`kernel-dev/common:using an "in-tree" \`\`defconfig\`\` file`"
section in the Yocto Project Linux Kernel Development Manual.
+ :term:`KCONFIG_MODE`
+ When used with the :ref:`kernel-yocto <ref-classes-kernel-yocto>`
+ class, specifies the kernel configuration values to use for options
+ not specified in the provided ``defconfig`` file. Valid options are::
+
+ KCONFIG_MODE = "alldefconfig"
+ KCONFIG_MODE = "allnoconfig"
+
+ In ``alldefconfig`` mode the options not explicitly specified will be
+ assigned their Kconfig default value. In ``allnoconfig`` mode the
+ options not explicitly specified will be disabled in the kernel
+ config.
+
+ In case ``KCONFIG_MODE`` is not set the behaviour will depend on where
+ the ``defconfig`` file is coming from. An "in-tree" ``defconfig`` file
+ will be handled in ``alldefconfig`` mode, a ``defconfig`` file placed
+ in ``${WORKDIR}`` through a meta-layer will be handled in
+ ``allnoconfig`` mode.
+
+ An "in-tree" ``defconfig`` file can be selected via the
+ :term:`KBUILD_DEFCONFIG` variable. ``KCONFIG_MODE`` does not need to
+ be explicitly set.
+
+ A ``defconfig`` file compatible with ``allnoconfig`` mode can be
+ generated by copying the ``.config`` file from a working Linux kernel
+ build, renaming it to ``defconfig`` and placing it into the Linux
+ kernel ``${WORKDIR}`` through your meta-layer. ``KCONFIG_MODE`` does
+ not need to be explicitly set.
+
+ A ``defconfig`` file compatible with ``alldefconfig`` mode can be
+ generated using the
+ :ref:`ref-tasks-savedefconfig`
+ task and placed into the Linux kernel ``${WORKDIR}`` through your
+ meta-layer. Explicitely set ``KCONFIG_MODE``::
+
+ KCONFIG_MODE = "alldefconfig"
+
+
:term:`KERNEL_ALT_IMAGETYPE`
Specifies an alternate kernel image type for creation in addition to
the kernel image type specified using the
@@ -3779,7 +3816,7 @@
.. note::
- Legacy support exists for specifying the full path to the device
+ There is legacy support for specifying the full path to the device
tree. However, providing just the ``.dtb`` file is preferred.
In order to use this variable, the
@@ -4004,7 +4041,7 @@
:term:`KERNELDEPMODDEPEND`
Specifies whether the data referenced through
- :term:`PKGDATA_DIR` is needed or not. The
+ :term:`PKGDATA_DIR` is needed or not.
``KERNELDEPMODDEPEND`` does not control whether or not that data
exists, but simply whether or not it is used. If you do not need to
use the data, set the ``KERNELDEPMODDEPEND`` variable in your
@@ -4189,8 +4226,8 @@
- Separate license names using \| (pipe) when there is a choice
between licenses.
- - Separate license names using & (ampersand) when multiple licenses
- exist that cover different parts of the source.
+ - Separate license names using & (ampersand) when there are
+ multiple licenses for different parts of the source.
- You can use spaces between license names.
@@ -4338,8 +4375,8 @@
The variable corresponds to a machine configuration file of the same
name, through which machine-specific configurations are set. Thus,
- when ``MACHINE`` is set to "qemux86" there exists the corresponding
- ``qemux86.conf`` machine configuration file, which can be found in
+ when ``MACHINE`` is set to "qemux86", the corresponding
+ ``qemux86.conf`` machine configuration file can be found in
the :term:`Source Directory` in
``meta/conf/machine``.
@@ -4704,7 +4741,7 @@
:term:`NO_GENERIC_LICENSE`
Avoids QA errors when you use a non-common, non-CLOSED license in a
- recipe. Packages exist, such as the linux-firmware package, with many
+ recipe. There are packages, such as the linux-firmware package, with many
licenses that are not in any way common. Also, new licenses are added
occasionally to avoid introducing a lot of common license files,
which are only applicable to a specific package.
@@ -4716,7 +4753,7 @@
NO_GENERIC_LICENSE[license_name] = "license_file_in_fetched_source"
- The following is an example that
+ Here is an example that
uses the ``LICENSE.Abilis.txt`` file as the license from the fetched
source::
@@ -4748,8 +4785,8 @@
functionality, such as kernel modules. It is up to you to add
packages with the :term:`IMAGE_INSTALL` variable.
- Support for this variable exists only when using the IPK and RPM
- packaging backend. Support does not exist for DEB.
+ This variable is only supported when using the IPK and RPM
+ packaging backends. DEB is not supported.
See the :term:`BAD_RECOMMENDATIONS` and
the :term:`PACKAGE_EXCLUDE` variables for
@@ -5026,8 +5063,8 @@
an iterative development process to remove specific components from a
system.
- Support for this variable exists only when using the IPK and RPM
- packaging backend. Support does not exist for DEB.
+ This variable is supported only when using the IPK and RPM
+ packaging backends. DEB is not supported.
See the :term:`NO_RECOMMENDATIONS` and the
:term:`BAD_RECOMMENDATIONS` variables for
@@ -6173,7 +6210,7 @@
:term:`PACKAGE_EXCLUDE` variables.
Packages specified in ``RRECOMMENDS`` need not actually be produced.
- However, a recipe must exist that provides each package, either
+ However, there must be a recipe providing each package, either
through the :term:`PACKAGES` or
:term:`PACKAGES_DYNAMIC` variables or the
:term:`RPROVIDES` variable, or an error will occur
@@ -6653,8 +6690,8 @@
value of the :term:`TARGET_CFLAGS` variable.
The ``SELECTED_OPTIMIZATION`` variable takes the value of
- ``FULL_OPTIMIZATION`` unless ``DEBUG_BUILD`` = "1". If that is the
- case, the value of ``DEBUG_OPTIMIZATION`` is used.
+ :term:`FULL_OPTIMIZATION` unless :term:`DEBUG_BUILD` = "1", in which
+ case the value of :term:`DEBUG_OPTIMIZATION` is used.
:term:`SERIAL_CONSOLE`
Defines a serial console (TTY) to enable using
@@ -6941,8 +6978,8 @@
- ``az://`` - Fetches files from an Azure Storage account.
- Standard and recipe-specific options for ``SRC_URI`` exist. Here are
- standard options:
+ There are standard and recipe-specific options for ``SRC_URI``. Here are
+ standard ones:
- ``apply`` - Whether to apply the patch or not. The default
action is to apply the patch.
@@ -7629,8 +7666,8 @@
:term:`TARGET_OS`
Specifies the target's operating system. The variable can be set to
"linux" for glibc-based systems (GNU C Library) and to "linux-musl"
- for musl libc. For ARM/EABI targets, "linux-gnueabi" and
- "linux-musleabi" possible values exist.
+ for musl libc. For ARM/EABI targets, the possible values are
+ "linux-gnueabi" and "linux-musleabi".
:term:`TARGET_PREFIX`
Specifies the prefix used for the toolchain binary target tools.
@@ -8331,11 +8368,10 @@
configure options are simply not passed to the configure script (e.g.
should be removed from :term:`EXTRA_OECONF` or
:term:`PACKAGECONFIG_CONFARGS`).
- However, common options, for example, exist that are passed to all
- configure scripts at a class level that might not be valid for some
- configure scripts. It follows that no benefit exists in seeing a
- warning about these options. For these cases, the options are added
- to ``UNKNOWN_CONFIGURE_WHITELIST``.
+ However, there are common options that are passed to all
+ configure scripts at a class level, but might not be valid for some
+ configure scripts. Therefore warnings about these options are useless.
+ For these cases, the options are added to ``UNKNOWN_CONFIGURE_WHITELIST``.
The configure arguments check that uses
``UNKNOWN_CONFIGURE_WHITELIST`` is part of the
diff --git a/poky/documentation/releases.rst b/poky/documentation/releases.rst
index b95a6ed..f278e21 100644
--- a/poky/documentation/releases.rst
+++ b/poky/documentation/releases.rst
@@ -9,6 +9,7 @@
*******************************
- :yocto_docs:`3.3 Documentation </3.3>`
+- :yocto_docs:`3.3.1 Documentation </3.3.1>`
*******************************
3.2 'gatesgarth' Release Series
@@ -18,6 +19,7 @@
- :yocto_docs:`3.2.1 Documentation </3.2.1>`
- :yocto_docs:`3.2.2 Documentation </3.2.2>`
- :yocto_docs:`3.2.3 Documentation </3.2.3>`
+- :yocto_docs:`3.2.4 Documentation </3.2.4>`
****************************
3.1 'dunfell' Release Series
diff --git a/poky/documentation/sdk-manual/appendix-customizing.rst b/poky/documentation/sdk-manual/appendix-customizing.rst
index fb2d784..67b49d9 100644
--- a/poky/documentation/sdk-manual/appendix-customizing.rst
+++ b/poky/documentation/sdk-manual/appendix-customizing.rst
@@ -57,8 +57,7 @@
============================================================
In most cases, the extensible SDK defaults should work with your :term:`Build
-Host`'s setup.
-However, some cases exist for which you might consider making
+Host`'s setup. However, there are cases when you might consider making
adjustments:
- If your SDK configuration inherits additional classes using the
@@ -153,7 +152,7 @@
SDK_TITLE ??= "${@d.getVar('DISTRO_NAME') or d.getVar('DISTRO')} SDK"
-While several ways exist to change this variable, an efficient method is
+While there are several ways of changing this variable, an efficient method is
to set the variable in your distribution's configuration file. Doing so
creates an SDK installer title that applies across your distribution. As
an example, assume you have your own layer for your distribution named
@@ -223,7 +222,7 @@
change this default installation directory by specifically setting the
``SDKEXTPATH`` variable.
-While a number of ways exist through which you can set this variable,
+While there are several ways of setting this variable,
the method that makes the most sense is to set the variable in your
distribution's configuration file. Doing so creates an SDK installer
default directory that applies across your distribution. As an example,
diff --git a/poky/documentation/sdk-manual/extensible.rst b/poky/documentation/sdk-manual/extensible.rst
index 04bafae..55bd7f6 100644
--- a/poky/documentation/sdk-manual/extensible.rst
+++ b/poky/documentation/sdk-manual/extensible.rst
@@ -194,7 +194,7 @@
devtool
quick reference.
-Three ``devtool`` subcommands exist that provide entry-points into
+Three ``devtool`` subcommands provide entry-points into
development:
- *devtool add*: Assists in adding new software to be built.
@@ -276,7 +276,7 @@
devtool
always creates a Git repository locally during the extraction.
- Furthermore, the first positional argument srctree in this case
+ Furthermore, the first positional argument ``srctree`` in this case
identifies where the ``devtool add`` command will locate the
extracted code outside of the workspace. You need to specify an
empty directory::
@@ -285,13 +285,13 @@
In summary,
the source code is pulled from fetchuri and extracted into the
- location defined by srctree as a local Git repository.
+ location defined by ``srctree`` as a local Git repository.
Within workspace, ``devtool`` creates a recipe named recipe along
with an associated append file.
- *Right*: The right scenario in the figure represents a situation
- where the srctree has been previously prepared outside of the
+ where the ``srctree`` has been previously prepared outside of the
``devtool`` workspace.
The following command provides a new recipe name and identifies
@@ -437,7 +437,7 @@
locate the source code and any local patch files from other
developers.
- With this scenario, no srctree argument exists. Consequently, the
+ With this scenario, there is no ``srctree`` argument. Consequently, the
default behavior of the ``devtool modify`` command is to extract
the source files pointed to by the ``SRC_URI`` statements into a
local Git structure. Furthermore, the location for the extracted
@@ -483,21 +483,21 @@
under the newly created source tree.
Once the files are located, the command by default extracts them
- into srctree.
+ into ``srctree``.
Within workspace, ``devtool`` creates an append file for the
recipe. The recipe remains in its original location but the source
- files are extracted to the location you provide with srctree.
+ files are extracted to the location you provide with ``srctree``.
- *Right*: The right scenario in the figure represents a situation
- where the source tree (srctree) already exists locally as a
+ where the source tree (``srctree``) already exists locally as a
previously extracted Git structure outside of the ``devtool``
workspace. In this example, the recipe also exists elsewhere
locally in its own layer.
The following command tells ``devtool`` the recipe with which to
work, uses the "-n" option to indicate source does not need to be
- extracted, and uses srctree to point to the previously extracted
+ extracted, and uses ``srctree`` to point to the previously extracted
source files::
$ devtool modify -n recipe srctree
@@ -646,8 +646,9 @@
code into the ``sources`` directory in the
:ref:`devtool-the-workspace-layer-structure`.
If you want the code extracted to any other location, you need to
- provide the srctree positional argument with the command as follows:
- $ devtool upgrade -V version recipe srctree
+ provide the ``srctree`` positional argument with the command as follows::
+
+ $ devtool upgrade -V version recipe srctree
.. note::
@@ -674,8 +675,8 @@
are incorporated into the build the next time you build the software
just as are other changes you might have made to the source.
-2. *Resolve any Conflicts created by the Upgrade*: Conflicts could exist
- due to the software being upgraded to a new version. Conflicts occur
+2. *Resolve any Conflicts created by the Upgrade*: Conflicts could happen
+ after upgrading the software to a new version. Conflicts occur
if your recipe specifies some patch files in ``SRC_URI`` that
conflict with changes made in the new version of the software. For
such cases, you need to resolve the conflicts by editing the source
@@ -908,8 +909,8 @@
similar manner to the environment set up by the SDK's environment
setup script. One easy way to see these variables is to run the
``devtool build`` command on the recipe and then look in
- ``oe-logs/run.do_compile``. Towards the top of this file, a list of
- environment variables exists that are being set. You can take
+ ``oe-logs/run.do_compile``. Towards the top of this file, there is
+ a list of environment variables that are set. You can take
advantage of these variables within the Makefile.
- If the Makefile sets a default for a variable using "=", that default
@@ -953,7 +954,7 @@
Specifying the name like this produces a recipe that only builds for
the build host.
-- Specify the "DASHDASHalso-native" option with the ``devtool add``
+- Specify the "--also-native" option with the ``devtool add``
command. Specifying this option creates a recipe file that still
builds for the target but also creates a variant with a "-native"
suffix that builds for the build host.
@@ -964,7 +965,7 @@
that builds code for the target, you can typically accomplish this by
building the native and target parts separately rather than within
the same compilation process. Realize though that with the
- "DASHDASHalso-native" option, you can add the tool using just one
+ "--also-native" option, you can add the tool using just one
recipe file.
Adding Node.js Modules
@@ -1037,8 +1038,8 @@
does not include complete instructions for building the software.
Instead, common functionality is encapsulated in classes inherited with
the ``inherit`` directive. This technique leaves the recipe to describe
-just the things that are specific to the software being built. A
-:ref:`base <ref-classes-base>` class exists that
+just the things that are specific to the software being built. There is
+a :ref:`base <ref-classes-base>` class that
is implicitly inherited by all recipes and provides the functionality
that most recipes typically need.
@@ -1100,7 +1101,7 @@
exact options being passed, and shows them to you along with any custom
arguments specified through ``EXTRA_OECONF`` or
``PACKAGECONFIG_CONFARGS``. If applicable, the command also shows you
-the output of the configure script's "DASHDASHhelp" option as a
+the output of the configure script's "--help" option as a
reference.
Sharing Files Between Recipes
@@ -1110,9 +1111,9 @@
:term:`Build Host`. For example,
an application linking to a common library needs access to the library
itself and its associated headers. The way this access is accomplished
-within the extensible SDK is through the sysroot. One sysroot exists per
+within the extensible SDK is through the sysroot. There is one sysroot per
"machine" for which the SDK is being built. In practical terms, this
-means a sysroot exists for the target machine, and a sysroot exists for
+means there is a sysroot for the target machine, and a sysroot for
the build host.
Recipes should never write files directly into the sysroot. Instead,
@@ -1159,8 +1160,8 @@
``${``\ :term:`PN`\ ``}`` evaluates to the
recipe name). The order of the ``PACKAGES`` value is significant. For
each installed file, the first package whose ``FILES`` value matches the
-file is the package into which the file goes. Defaults exist for both
-the ``PACKAGES`` and ``FILES`` variables. Consequently, you might find
+file is the package into which the file goes. Both the ``PACKAGES`` and
+``FILES`` variables have default values. Consequently, you might find
you do not even need to set these variables in your recipe unless the
software the recipe is building installs files into non-standard
locations.
@@ -1230,7 +1231,7 @@
It is important to remember that building the item from source
takes significantly longer than installing the pre-built artifact. Also,
-if no recipe exists for the item you want to add to the SDK, you must
+if there is no recipe for the item you want to add to the SDK, you must
instead add the item using the ``devtool add`` command.
Applying Updates to an Installed Extensible SDK
diff --git a/poky/documentation/sdk-manual/intro.rst b/poky/documentation/sdk-manual/intro.rst
index d966efe..2f94aaf 100644
--- a/poky/documentation/sdk-manual/intro.rst
+++ b/poky/documentation/sdk-manual/intro.rst
@@ -8,8 +8,8 @@
=================
Welcome to the Yocto Project Application Development and the Extensible
-Software Development Kit (eSDK) manual. This manual provides information
-that explains how to use both the Yocto Project extensible and standard
+Software Development Kit (eSDK) manual. This manual
+explains how to use both the Yocto Project extensible and standard
SDKs to develop applications and images.
.. note::
@@ -25,12 +25,13 @@
All SDKs consist of the following:
- *Cross-Development Toolchain*: This toolchain contains a compiler,
- debugger, and various miscellaneous tools.
+ debugger, and various associated tools.
- *Libraries, Headers, and Symbols*: The libraries, headers, and
- symbols are specific to the image (i.e. they match the image).
+ symbols are specific to the image (i.e. they match the image
+ against which the SDK was built).
-- *Environment Setup Script*: This ``*.sh`` file, once run, sets up the
+- *Environment Setup Script*: This ``*.sh`` file, once sourced, sets up the
cross-development environment by defining variables and preparing for
SDK use.
@@ -48,14 +49,14 @@
for a wrapper around the ``populate_sdk`` and ``populate_sdk_ext``
archives.
-Another feature for the SDKs is that only one set of cross-compiler
+Another feature of the SDKs is that only one set of cross-compiler
toolchain binaries are produced for any given architecture. This feature
takes advantage of the fact that the target hardware can be passed to
``gcc`` as a set of compiler options. Those options are set up by the
environment script and contained in variables such as
:term:`CC` and
:term:`LD`. This reduces the space needed
-for the tools. Understand, however, that every target still needs a
+for the tools. Understand, however, that every target still needs its own
sysroot because those binaries are target-specific.
The SDK development environment consists of the following:
@@ -118,8 +119,8 @@
The :term:`Cross-Development Toolchain` consists
of a cross-compiler, cross-linker, and cross-debugger that are used to
-develop user-space applications for targeted hardware. Additionally, for
-an extensible SDK, the toolchain also has built-in ``devtool``
+develop user-space applications for targeted hardware; in addition,
+the extensible SDK comes with built-in ``devtool``
functionality. This toolchain is created by running a SDK installer
script or through a :term:`Build Directory` that is based on
your metadata configuration or extension for your targeted device. The
@@ -138,21 +139,19 @@
-----------------
The QEMU emulator allows you to simulate your hardware while running
-your application or image. QEMU is not part of the SDK but is made
-available a number of different ways:
+your application or image. QEMU is not part of the SDK but is
+automatically installed and available if you have done any one of
+the following:
-- If you have cloned the ``poky`` Git repository to create a
- :term:`Source Directory` and you have
- sourced the environment setup script, QEMU is installed and
- automatically available.
+- cloned the ``poky`` Git repository to create a
+ :term:`Source Directory` and sourced the environment setup script.
-- If you have downloaded a Yocto Project release and unpacked it to
- create a Source Directory and you have sourced the environment setup
- script, QEMU is installed and automatically available.
+- downloaded a Yocto Project release and unpacked it to
+ create a Source Directory and sourced the environment setup
+ script.
-- If you have installed the cross-toolchain tarball and you have
- sourced the toolchain's setup environment script, QEMU is also
- installed and automatically available.
+- installed the cross-toolchain tarball and
+ sourced the toolchain's setup environment script.
SDK Development Model
=====================
@@ -202,10 +201,9 @@
.. note::
- To use the root filesystem in QEMU, you need to extract it. See
- the "
- Extracting the Root Filesystem
- " section for information on how to extract the root filesystem.
+ To use the root filesystem in QEMU, you need to extract it. See the
+ ":ref:`sdk-manual/appendix-obtain:extracting the root filesystem`"
+ section for information on how to do this extraction.
3. *Develop and Test your Application:* At this point, you have the
tools to develop your application. If you need to separately install
@@ -216,5 +214,5 @@
within the Yocto Project.
The remainder of this manual describes how to use the extensible and
-standard SDKs. Information also exists in appendix form that describes
+standard SDKs. There is also information in appendix form describing
how you can build, install, and modify an SDK.
diff --git a/poky/documentation/sdk-manual/using.rst b/poky/documentation/sdk-manual/using.rst
index fa0e8d4..3016278 100644
--- a/poky/documentation/sdk-manual/using.rst
+++ b/poky/documentation/sdk-manual/using.rst
@@ -11,9 +11,8 @@
.. note::
For a side-by-side comparison of main features supported for a
- standard SDK as compared to an extensible SDK, see the "
- Introduction
- " section.
+ standard SDK as compared to an extensible SDK, see the
+ ":ref:`sdk-manual/intro:introduction`" section.
You can use a standard SDK to work on Makefile and Autotools-based
projects. See the
@@ -49,7 +48,7 @@
64-bit architectures with the ``x86_64`` directories, respectively. The
toolchains the Yocto Project provides are based off the
``core-image-sato`` and ``core-image-minimal`` images and contain
-libraries appropriate for developing against that image.
+libraries appropriate for developing against the corresponding image.
The names of the tarball installer scripts are such that a string
representing the host system appears first in the filename and then is
@@ -84,9 +83,9 @@
.. note::
As an alternative to downloading an SDK, you can build the SDK
- installer. For information on building the installer, see the "
- Building an SDK Installer
- " section.
+ installer. For information on building the installer, see the
+ ":ref:`sdk-manual/appendix-obtain:building an sdk installer`"
+ section.
The SDK and toolchains are self-contained and by default are installed
into the ``poky_sdk`` folder in your home directory. You can choose to
diff --git a/poky/documentation/sphinx-static/switchers.js b/poky/documentation/sphinx-static/switchers.js
index 3f62e29..a32d872 100644
--- a/poky/documentation/sphinx-static/switchers.js
+++ b/poky/documentation/sphinx-static/switchers.js
@@ -3,8 +3,8 @@
var all_versions = {
'dev': 'dev (3.4)',
- '3.3': '3.3',
- '3.2.3': '3.2.3',
+ '3.3.1': '3.3.1',
+ '3.2.4': '3.2.4',
'3.1.7': '3.1.7',
'3.0.4': '3.0.4',
'2.7.4': '2.7.4',
diff --git a/poky/documentation/toaster-manual/reference.rst b/poky/documentation/toaster-manual/reference.rst
index 3d4efe9..c0d02ff 100644
--- a/poky/documentation/toaster-manual/reference.rst
+++ b/poky/documentation/toaster-manual/reference.rst
@@ -9,8 +9,8 @@
final chapter provides conceptual information on layer sources,
releases, and JSON configuration files. Also provided is a quick look at
some useful ``manage.py`` commands that are Toaster-specific.
-Information on ``manage.py`` commands does exist across the Web and the
-information in this manual by no means attempts to provide a command
+Information on ``manage.py`` commands is available across the Web and
+this manual by no means attempts to provide a command
comprehensive reference.
Layer Source
@@ -32,9 +32,8 @@
`REST <https://en.wikipedia.org/wiki/Representational_state_transfer>`__
API, store the information about the layers in the Toaster database, and
then show the information to users. Users are then able to view that
-information and build layers from Toaster itself without worrying about
-cloning or editing the BitBake layers configuration file
-``bblayers.conf``.
+information and build layers from Toaster itself without having to
+clone or edit the BitBake layers configuration file ``bblayers.conf``.
Tying a layer source into Toaster is convenient when you have many
custom layers that need to be built on a regular basis by a community of
@@ -187,7 +186,7 @@
------------------------
The ``bldcontrol/management/commands/checksettings.py`` file controls
-workflow configuration. The following steps outline the process to
+workflow configuration. Here is the process to
initially populate this database.
1. The default project settings are set from
@@ -238,7 +237,7 @@
Understanding Fixture File Format
---------------------------------
-The following is an overview of the file format used by the
+Here is an overview of the file format used by the
``oe-core.xml``, ``poky.xml``, and ``custom.xml`` files.
The following subsections describe each of the sections in the fixture
@@ -408,7 +407,7 @@
Be sure to provide values for host and port. The output is a JSON file that
itemizes all builds in progress. This file includes the time in seconds since
each respective build started as well as the progress of the cloning, parsing,
-and task execution. The following is sample output for a build in progress:
+and task execution. Here is sample output for a build in progress:
.. code-block:: JSON
@@ -441,8 +440,8 @@
http://host:port/toastergui/api/builds
Be sure to provide values for host and port. The output is a JSON file that
-itemizes all complete builds, and includes build summary information. The
-following is sample output for a completed build:
+itemizes all complete builds, and includes build summary information. Here
+is sample output for a completed build:
.. code-block:: JSON
@@ -480,7 +479,7 @@
section for more information.
The output is a JSON file that itemizes the specific build and includes
-build summary information. The following is sample output for a specific
+build summary information. Here is sample output for a specific
build:
.. code-block:: JSON
@@ -509,7 +508,7 @@
===============
In addition to the web user interface and the scripts that start and
-stop Toaster, command-line commands exist through the ``manage.py``
+stop Toaster, command-line commands are available through the ``manage.py``
management script. You can find general documentation on ``manage.py``
at the
`Django <https://docs.djangoproject.com/en/2.2/topics/settings/>`__
diff --git a/poky/meta-poky/conf/local.conf.sample b/poky/meta-poky/conf/local.conf.sample
index a94b613..fb14379 100644
--- a/poky/meta-poky/conf/local.conf.sample
+++ b/poky/meta-poky/conf/local.conf.sample
@@ -148,11 +148,8 @@
# enable extra features. Some available options which can be included in this variable
# are:
# - 'buildstats' collect build statistics
-# - 'image-mklibs' to reduce shared library files size for an image
# - 'image-prelink' in order to prelink the filesystem image
-# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
-# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
-USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+USER_CLASSES ?= "buildstats image-prelink"
#
# Runtime testing of images
@@ -188,7 +185,7 @@
#
# Monitor the disk space during the build. If there is less that 1GB of space or less
# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
-# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# shutdown the build. If there is less than 100MB or 1K inodes, perform a hard abort
# of the build. The reason for this is that running completely out of space can corrupt
# files and damages the build in ways which may not be easily recoverable.
# It's necessary to monitor /tmp, if there is no space left the build will fail
diff --git a/poky/meta-poky/conf/local.conf.sample.extended b/poky/meta-poky/conf/local.conf.sample.extended
index c241caa..a670c74 100644
--- a/poky/meta-poky/conf/local.conf.sample.extended
+++ b/poky/meta-poky/conf/local.conf.sample.extended
@@ -119,15 +119,6 @@
#
# TCMODE ?= "external-sourcery"
-# mklibs library size optimization is more useful to smaller images,
-# and less useful for bigger images. Also mklibs library optimization
-# can break the ABI compatibility, so should not be applied to the
-# images which are to be extended or upgraded later.
-#This enabled mklibs library size optimization just for the specified image.
-#MKLIBS_OPTIMIZED_IMAGES ?= "core-image-minimal"
-#This enable mklibs library size optimization will be for all the images.
-#MKLIBS_OPTIMIZED_IMAGES ?= "all"
-
# This value is currently used by pseudo to determine if the recipe should
# build both the 32-bit and 64-bit wrapper libraries on a 64-bit build system.
#
diff --git a/poky/meta-skeleton/recipes-baremetal/baremetal-examples/baremetal-helloworld_git.bb b/poky/meta-skeleton/recipes-baremetal/baremetal-examples/baremetal-helloworld_git.bb
index ee945c1..19ef169 100644
--- a/poky/meta-skeleton/recipes-baremetal/baremetal-examples/baremetal-helloworld_git.bb
+++ b/poky/meta-skeleton/recipes-baremetal/baremetal-examples/baremetal-helloworld_git.bb
@@ -4,7 +4,7 @@
LICENSE = "MIT"
LIC_FILES_CHKSUM = "file://LICENSE;md5=39346640a23c701e4f459e05f56f4449"
-SRCREV = "99f4fa4a3b266b42b52af302610b0f4f429ba5e3"
+SRCREV = "0bf9ea216e6f76be50726a3a74e527b7bbb0ad93"
PV = "0.1+git${SRCPV}"
SRC_URI = "git://github.com/aehs29/baremetal-helloqemu.git;protocol=https;branch=master"
@@ -28,12 +28,13 @@
# machine that QEMU uses on OE, e.g. -machine virt -cpu cortex-a57
# but the examples can also be run on other architectures/machines
# such as vexpress-a15 by overriding the setting on the machine.conf
-COMPATIBLE_MACHINE = "qemuarmv5|qemuarm|qemuarm64"
+COMPATIBLE_MACHINE = "qemuarmv5|qemuarm|qemuarm64|qemuriscv64"
BAREMETAL_QEMUARCH ?= ""
BAREMETAL_QEMUARCH_qemuarmv5 = "versatile"
BAREMETAL_QEMUARCH_qemuarm = "arm"
BAREMETAL_QEMUARCH_qemuarm64 = "aarch64"
+BAREMETAL_QEMUARCH_qemuriscv64 = "riscv64"
EXTRA_OEMAKE_append = " QEMUARCH=${BAREMETAL_QEMUARCH} V=1"
diff --git a/poky/meta/classes/baremetal-image.bbclass b/poky/meta/classes/baremetal-image.bbclass
index b0f5e88..8708a54 100644
--- a/poky/meta/classes/baremetal-image.bbclass
+++ b/poky/meta/classes/baremetal-image.bbclass
@@ -50,6 +50,10 @@
if os.path.lexists(manifest_link):
os.remove(manifest_link)
os.symlink(os.path.basename(manifest_name), manifest_link)
+ # A lot of postprocess commands assume the existence of rootfs/etc
+ sysconfdir = d.getVar("IMAGE_ROOTFS") + d.getVar('sysconfdir')
+ bb.utils.mkdirhier(sysconfdir)
+
execute_pre_post_process(d, d.getVar('ROOTFS_POSTPROCESS_COMMAND'))
}
@@ -73,7 +77,19 @@
QB_MEM ?= "-m 256"
QB_DEFAULT_FSTYPE ?= "bin"
QB_DTB ?= ""
-QB_OPT_APPEND = "-nographic"
+QB_OPT_APPEND_append = " -nographic"
+
+# RISC-V tunes set the BIOS, unset, and instruct QEMU to
+# ignore the BIOS and boot from -kernel
+QB_DEFAULT_BIOS_qemuriscv64 = ""
+QB_OPT_APPEND_append_qemuriscv64 = " -bios none"
+
+
+# Use the medium-any code model for the RISC-V 64 bit implementation,
+# since medlow can only access addresses below 0x80000000 and RAM
+# starts at 0x80000000 on RISC-V 64
+CFLAGS_append_qemuriscv64 = " -mcmodel=medany"
+
# This next part is necessary to trick the build system into thinking
# its building an image recipe so it generates the qemuboot.conf
diff --git a/poky/meta/classes/cml1.bbclass b/poky/meta/classes/cml1.bbclass
index 1c3d70b..d319d66 100644
--- a/poky/meta/classes/cml1.bbclass
+++ b/poky/meta/classes/cml1.bbclass
@@ -6,7 +6,7 @@
if s.endswith('.cfg'):
sources_list.append(s)
- return sorted(sources_list)
+ return sources_list
cml1_do_configure() {
set -e
diff --git a/poky/meta/classes/gi-docgen.bbclass b/poky/meta/classes/gi-docgen.bbclass
new file mode 100644
index 0000000..5750f70
--- /dev/null
+++ b/poky/meta/classes/gi-docgen.bbclass
@@ -0,0 +1,24 @@
+# gi-docgen is a new gnome documentation generator, which
+# seems to be a successor to gtk-doc:
+# https://gitlab.gnome.org/GNOME/gi-docgen
+
+# This variable is set to True if api-documentation is in
+# DISTRO_FEATURES, and False otherwise.
+GIDOCGEN_ENABLED ?= "${@bb.utils.contains('DISTRO_FEATURES', 'api-documentation', 'True', 'False', d)}"
+# When building native recipes, disable gi-docgen, as it is not necessary,
+# pulls in additional dependencies, and makes build times longer
+GIDOCGEN_ENABLED_class-native = "False"
+GIDOCGEN_ENABLED_class-nativesdk = "False"
+
+# meson: default option name to enable/disable gi-docgen. This matches most
+# projects' configuration. In doubts - check meson_options.txt in project's
+# source path.
+GIDOCGEN_MESON_OPTION ?= 'gtk_doc'
+GIDOCGEN_MESON_ENABLE_FLAG ?= 'true'
+GIDOCGEN_MESON_DISABLE_FLAG ?= 'false'
+
+# Auto enable/disable based on GIDOCGEN_ENABLED
+EXTRA_OEMESON_prepend = "-D${GIDOCGEN_MESON_OPTION}=${@bb.utils.contains('GIDOCGEN_ENABLED', 'True', '${GIDOCGEN_MESON_ENABLE_FLAG}', '${GIDOCGEN_MESON_DISABLE_FLAG}', d)} "
+
+DEPENDS_append = "${@' gi-docgen-native gi-docgen' if d.getVar('GIDOCGEN_ENABLED') == 'True' else ''}"
+
diff --git a/poky/meta/classes/gnomebase.bbclass b/poky/meta/classes/gnomebase.bbclass
index efcb6ca..884b1a1 100644
--- a/poky/meta/classes/gnomebase.bbclass
+++ b/poky/meta/classes/gnomebase.bbclass
@@ -1,5 +1,6 @@
def gnome_verdir(v):
- return oe.utils.trim_version(v, 2)
+ return ".".join(v.split(".")[:-1])
+
GNOME_COMPRESS_TYPE ?= "xz"
SECTION ?= "x11/gnome"
diff --git a/poky/meta/classes/icecc.bbclass b/poky/meta/classes/icecc.bbclass
index d095305..80943fc 100644
--- a/poky/meta/classes/icecc.bbclass
+++ b/poky/meta/classes/icecc.bbclass
@@ -138,10 +138,6 @@
if icecc_is_cross_canadian(bb, d):
return "no"
- if d.getVar('INHIBIT_DEFAULT_DEPS', False):
- # We don't have a compiler, so no icecc
- return "no"
-
pn = d.getVar('PN')
bpn = d.getVar('BPN')
@@ -362,7 +358,7 @@
ICECC_WHICH_AS="${@bb.utils.which(os.getenv('PATH'), 'as')}"
if [ ! -x "${ICECC_CC}" -o ! -x "${ICECC_CXX}" ]
then
- bbwarn "Cannot use icecc: could not get ICECC_CC or ICECC_CXX"
+ bbnote "Cannot use icecc: could not get ICECC_CC or ICECC_CXX"
return
fi
diff --git a/poky/meta/classes/image-live.bbclass b/poky/meta/classes/image-live.bbclass
index 8b08305..fd876ed 100644
--- a/poky/meta/classes/image-live.bbclass
+++ b/poky/meta/classes/image-live.bbclass
@@ -261,4 +261,4 @@
do_bootimg[subimages] = "hddimg iso"
do_bootimg[imgsuffix] = "."
-addtask bootimg before do_image_complete
+addtask bootimg before do_image_complete after do_rootfs
diff --git a/poky/meta/classes/image-mklibs.bbclass b/poky/meta/classes/image-mklibs.bbclass
deleted file mode 100644
index 68e11d4..0000000
--- a/poky/meta/classes/image-mklibs.bbclass
+++ /dev/null
@@ -1,56 +0,0 @@
-do_rootfs[depends] += "mklibs-native:do_populate_sysroot"
-
-IMAGE_PREPROCESS_COMMAND += "mklibs_optimize_image; "
-
-inherit linuxloader
-
-mklibs_optimize_image_doit() {
- rm -rf ${WORKDIR}/mklibs
- mkdir -p ${WORKDIR}/mklibs/dest
- cd ${IMAGE_ROOTFS}
- du -bs > ${WORKDIR}/mklibs/du.before.mklibs.txt
-
- # Build a list of dynamically linked executable ELF files.
- # Omit libc/libpthread as a special case because it has an interpreter
- # but is primarily what we intend to strip down.
- for i in `find . -type f -executable ! -name 'libc-*' ! -name 'libpthread-*'`; do
- file $i | grep -q ELF || continue
- ${HOST_PREFIX}readelf -l $i | grep -q INTERP || continue
- echo $i
- done > ${WORKDIR}/mklibs/executables.list
-
- dynamic_loader=${@get_linuxloader(d)}
-
- mklibs -v \
- --ldlib ${dynamic_loader} \
- --libdir ${baselib} \
- --sysroot ${PKG_CONFIG_SYSROOT_DIR} \
- --gcc-options "--sysroot=${PKG_CONFIG_SYSROOT_DIR}" \
- --root ${IMAGE_ROOTFS} \
- --target `echo ${TARGET_PREFIX} | sed 's/-$//' ` \
- -d ${WORKDIR}/mklibs/dest \
- `cat ${WORKDIR}/mklibs/executables.list`
-
- cd ${WORKDIR}/mklibs/dest
- for i in *
- do
- cp $i `find ${IMAGE_ROOTFS} -name $i`
- done
-
- cd ${IMAGE_ROOTFS}
- du -bs > ${WORKDIR}/mklibs/du.after.mklibs.txt
-
- echo rootfs size before mklibs optimization: `cat ${WORKDIR}/mklibs/du.before.mklibs.txt`
- echo rootfs size after mklibs optimization: `cat ${WORKDIR}/mklibs/du.after.mklibs.txt`
-}
-
-mklibs_optimize_image() {
- for img in ${MKLIBS_OPTIMIZED_IMAGES}
- do
- if [ "${img}" = "${PN}" ] || [ "${img}" = "all" ]
- then
- mklibs_optimize_image_doit
- break
- fi
- done
-}
diff --git a/poky/meta/classes/image.bbclass b/poky/meta/classes/image.bbclass
index 353cc67..67603d9 100644
--- a/poky/meta/classes/image.bbclass
+++ b/poky/meta/classes/image.bbclass
@@ -38,7 +38,7 @@
# Generate companion debugfs?
IMAGE_GEN_DEBUGFS ?= "0"
-# These pacackages will be installed as additional into debug rootfs
+# These packages will be installed as additional into debug rootfs
IMAGE_INSTALL_DEBUGFS ?= ""
# These packages will be removed from a read-only rootfs after all other
diff --git a/poky/meta/classes/image_types.bbclass b/poky/meta/classes/image_types.bbclass
index 8028691..2a45d45 100644
--- a/poky/meta/classes/image_types.bbclass
+++ b/poky/meta/classes/image_types.bbclass
@@ -108,6 +108,11 @@
IMAGE_CMD_squashfs-lzo = "mksquashfs ${IMAGE_ROOTFS} ${IMGDEPLOYDIR}/${IMAGE_NAME}${IMAGE_NAME_SUFFIX}.squashfs-lzo ${EXTRA_IMAGECMD} -noappend -comp lzo"
IMAGE_CMD_squashfs-lz4 = "mksquashfs ${IMAGE_ROOTFS} ${IMGDEPLOYDIR}/${IMAGE_NAME}${IMAGE_NAME_SUFFIX}.squashfs-lz4 ${EXTRA_IMAGECMD} -noappend -comp lz4"
+IMAGE_CMD_erofs = "mkfs.erofs ${EXTRA_IMAGECMD} ${IMGDEPLOYDIR}/${IMAGE_NAME}${IMAGE_NAME_SUFFIX}.erofs ${IMAGE_ROOTFS}"
+IMAGE_CMD_erofs-lz4 = "mkfs.erofs -zlz4 ${EXTRA_IMAGECMD} ${IMGDEPLOYDIR}/${IMAGE_NAME}${IMAGE_NAME_SUFFIX}.erofs-lz4 ${IMAGE_ROOTFS}"
+IMAGE_CMD_erofs-lz4hc = "mkfs.erofs -zlz4hc ${EXTRA_IMAGECMD} ${IMGDEPLOYDIR}/${IMAGE_NAME}${IMAGE_NAME_SUFFIX}.erofs-lz4hc ${IMAGE_ROOTFS}"
+
+
IMAGE_CMD_TAR ?= "tar"
# ignore return code 1 "file changed as we read it" as other tasks(e.g. do_image_wic) may be hardlinking rootfs
IMAGE_CMD_tar = "${IMAGE_CMD_TAR} --sort=name --format=posix --numeric-owner -cf ${IMGDEPLOYDIR}/${IMAGE_NAME}${IMAGE_NAME_SUFFIX}.tar -C ${IMAGE_ROOTFS} . || [ $? -eq 1 ]"
@@ -243,6 +248,9 @@
do_image_ubifs[depends] += "mtd-utils-native:do_populate_sysroot"
do_image_multiubi[depends] += "mtd-utils-native:do_populate_sysroot"
do_image_f2fs[depends] += "f2fs-tools-native:do_populate_sysroot"
+do_image_erofs[depends] += "erofs-utils-native:do_populate_sysroot"
+do_image_erofs_lz4[depends] += "erofs-utils-native:do_populate_sysroot"
+do_image_erofs_lz4hc[depends] += "erofs-utils-native:do_populate_sysroot"
# This variable is available to request which values are suitable for IMAGE_FSTYPES
IMAGE_TYPES = " \
@@ -261,6 +269,7 @@
wic wic.gz wic.bz2 wic.lzma wic.zst \
container \
f2fs \
+ erofs erofs-lz4 erofs-lz4hc \
"
# Compression is a special case of conversion. The old variable
diff --git a/poky/meta/classes/kernel-fitimage.bbclass b/poky/meta/classes/kernel-fitimage.bbclass
index 5cfd8af..e363eeb 100644
--- a/poky/meta/classes/kernel-fitimage.bbclass
+++ b/poky/meta/classes/kernel-fitimage.bbclass
@@ -217,13 +217,13 @@
bootscr_sign_keyname="${UBOOT_SIGN_KEYNAME}"
cat << EOF >> ${1}
- bootscr@${2} {
+ bootscr-${2} {
description = "U-boot script";
data = /incbin/("${3}");
type = "script";
arch = "${UBOOT_ARCH}";
compression = "none";
- hash@1 {
+ hash-1 {
algo = "${bootscr_csum}";
};
};
@@ -232,7 +232,7 @@
if [ "${UBOOT_SIGN_ENABLE}" = "1" -a "${FIT_SIGN_INDIVIDUAL}" = "1" -a -n "${bootscr_sign_keyname}" ] ; then
sed -i '$ d' ${1}
cat << EOF >> ${1}
- signature@1 {
+ signature-1 {
algo = "${bootscr_csum},${bootscr_sign_algo}";
key-name-hint = "${bootscr_sign_keyname}";
};
@@ -331,7 +331,7 @@
conf_csum="${FIT_HASH_ALG}"
conf_sign_algo="${FIT_SIGN_ALG}"
- if [ -n "${UBOOT_SIGN_ENABLE}" ] ; then
+ if [ "${UBOOT_SIGN_ENABLE}" = "1" ] ; then
conf_sign_keyname="${UBOOT_SIGN_KEYNAME}"
fi
@@ -383,7 +383,7 @@
if [ -n "${bootscr_id}" ]; then
conf_desc="${conf_desc}${sep}u-boot script"
sep=", "
- bootscr_line="bootscr = \"bootscr@${bootscr_id}\";"
+ bootscr_line="bootscr = \"bootscr-${bootscr_id}\";"
fi
if [ -n "${config_id}" ]; then
@@ -667,7 +667,34 @@
addtask assemble_fitimage_initramfs before do_deploy after do_bundle_initramfs
-addtask generate_rsa_keys before do_assemble_fitimage after do_compile
+do_kernel_generate_rsa_keys() {
+ if [ "${UBOOT_SIGN_ENABLE}" = "0" ] && [ "${FIT_GENERATE_KEYS}" = "1" ]; then
+ bbwarn "FIT_GENERATE_KEYS is set to 1 even though UBOOT_SIGN_ENABLE is set to 0. The keys will not be generated as they won't be used."
+ fi
+
+ if [ "${UBOOT_SIGN_ENABLE}" = "1" ] && [ "${FIT_GENERATE_KEYS}" = "1" ]; then
+
+ # Generate keys only if they don't already exist
+ if [ ! -f "${UBOOT_SIGN_KEYDIR}/${UBOOT_SIGN_KEYNAME}".key ] || \
+ [ ! -f "${UBOOT_SIGN_KEYDIR}/${UBOOT_SIGN_KEYNAME}".crt ]; then
+
+ # make directory if it does not already exist
+ mkdir -p "${UBOOT_SIGN_KEYDIR}"
+
+ echo "Generating RSA private key for signing fitImage"
+ openssl genrsa ${FIT_KEY_GENRSA_ARGS} -out \
+ "${UBOOT_SIGN_KEYDIR}/${UBOOT_SIGN_KEYNAME}".key \
+ "${FIT_SIGN_NUMBITS}"
+
+ echo "Generating certificate for signing fitImage"
+ openssl req ${FIT_KEY_REQ_ARGS} "${FIT_KEY_SIGN_PKCS}" \
+ -key "${UBOOT_SIGN_KEYDIR}/${UBOOT_SIGN_KEYNAME}".key \
+ -out "${UBOOT_SIGN_KEYDIR}/${UBOOT_SIGN_KEYNAME}".crt
+ fi
+ fi
+}
+
+addtask kernel_generate_rsa_keys before do_assemble_fitimage after do_compile
kernel_do_deploy[vardepsexclude] = "DATETIME"
kernel_do_deploy_append() {
@@ -718,13 +745,13 @@
# - Removes do_assemble_fitimage. FIT generation is done through
# do_assemble_fitimage_initramfs. do_assemble_fitimage is not needed
# and should not be part of the tasks to be executed.
-# - Since do_generate_rsa_keys is inserted by default
+# - Since do_kernel_generate_rsa_keys is inserted by default
# between do_compile and do_assemble_fitimage, this is
-# not suitable in case of initramfs bundles. do_generate_rsa_keys
+# not suitable in case of initramfs bundles. do_kernel_generate_rsa_keys
# should be between do_bundle_initramfs and do_assemble_fitimage_initramfs.
python () {
if d.getVar('INITRAMFS_IMAGE_BUNDLE') == "1":
bb.build.deltask('do_assemble_fitimage', d)
- bb.build.deltask('generate_rsa_keys', d)
- bb.build.addtask('generate_rsa_keys', 'do_assemble_fitimage_initramfs', 'do_bundle_initramfs', d)
+ bb.build.deltask('kernel_generate_rsa_keys', d)
+ bb.build.addtask('kernel_generate_rsa_keys', 'do_assemble_fitimage_initramfs', 'do_bundle_initramfs', d)
}
diff --git a/poky/meta/classes/kernel-yocto.bbclass b/poky/meta/classes/kernel-yocto.bbclass
index 30f07de..ba139dd 100644
--- a/poky/meta/classes/kernel-yocto.bbclass
+++ b/poky/meta/classes/kernel-yocto.bbclass
@@ -113,6 +113,8 @@
cd ${S}
export KMETA=${KMETA}
+ bbnote "do_kernel_metadata: for summary/debug, set KCONF_AUDIT_LEVEL > 0"
+
# if kernel tools are available in-tree, they are preferred
# and are placed on the path before any external tools. Unless
# the external tools flag is set, in that case we do nothing.
@@ -290,6 +292,21 @@
fi
fi
fi
+
+ if [ ${KCONF_AUDIT_LEVEL} -gt 0 ]; then
+ bbnote "kernel meta data summary for ${KMACHINE} (${LINUX_KERNEL_TYPE}):"
+ bbnote "======================================================================"
+ if [ -n "${KMETA_EXTERNAL_BSPS}" ]; then
+ bbnote "Non kernel-cache (external) bsp"
+ fi
+ bbnote "BSP entry point / definition: $bsp_definition"
+ if [ -n "$in_tree_defconfig" ]; then
+ bbnote "KBUILD_DEFCONFIG: ${KBUILD_DEFCONFIG}"
+ fi
+ bbnote "Fragments from SRC_URI: $sccs_from_src_uri"
+ bbnote "KERNEL_FEATURES: $KERNEL_FEATURES_FINAL"
+ bbnote "Final scc/cfg list: $sccs_defconfig $bsp_definition $sccs $KERNEL_FEATURES_FINAL"
+ fi
}
do_patch() {
diff --git a/poky/meta/classes/meson-routines.bbclass b/poky/meta/classes/meson-routines.bbclass
new file mode 100644
index 0000000..be3aeed
--- /dev/null
+++ b/poky/meta/classes/meson-routines.bbclass
@@ -0,0 +1,51 @@
+inherit siteinfo
+
+def meson_array(var, d):
+ items = d.getVar(var).split()
+ return repr(items[0] if len(items) == 1 else items)
+
+# Map our ARCH values to what Meson expects:
+# http://mesonbuild.com/Reference-tables.html#cpu-families
+def meson_cpu_family(var, d):
+ import re
+ arch = d.getVar(var)
+ if arch == 'powerpc':
+ return 'ppc'
+ elif arch == 'powerpc64' or arch == 'powerpc64le':
+ return 'ppc64'
+ elif arch == 'armeb':
+ return 'arm'
+ elif arch == 'aarch64_be':
+ return 'aarch64'
+ elif arch == 'mipsel':
+ return 'mips'
+ elif arch == 'mips64el':
+ return 'mips64'
+ elif re.match(r"i[3-6]86", arch):
+ return "x86"
+ elif arch == "microblazeel":
+ return "microblaze"
+ else:
+ return arch
+
+# Map our OS values to what Meson expects:
+# https://mesonbuild.com/Reference-tables.html#operating-system-names
+def meson_operating_system(var, d):
+ os = d.getVar(var)
+ if "mingw" in os:
+ return "windows"
+ # avoid e.g 'linux-gnueabi'
+ elif "linux" in os:
+ return "linux"
+ else:
+ return os
+
+def meson_endian(prefix, d):
+ arch, os = d.getVar(prefix + "_ARCH"), d.getVar(prefix + "_OS")
+ sitedata = siteinfo_data_for_machine(arch, os, d)
+ if "endian-little" in sitedata:
+ return "little"
+ elif "endian-big" in sitedata:
+ return "big"
+ else:
+ bb.fatal("Cannot determine endianism for %s-%s" % (arch, os))
diff --git a/poky/meta/classes/meson.bbclass b/poky/meta/classes/meson.bbclass
index bf9b02e..8ae0285 100644
--- a/poky/meta/classes/meson.bbclass
+++ b/poky/meta/classes/meson.bbclass
@@ -1,4 +1,4 @@
-inherit siteinfo python3native
+inherit python3native meson-routines
DEPENDS_append = " meson-native ninja-native"
@@ -35,56 +35,6 @@
MESON_CROSS_FILE_class-target = "--cross-file ${WORKDIR}/meson.cross"
MESON_CROSS_FILE_class-nativesdk = "--cross-file ${WORKDIR}/meson.cross"
-def meson_array(var, d):
- items = d.getVar(var).split()
- return repr(items[0] if len(items) == 1 else items)
-
-# Map our ARCH values to what Meson expects:
-# http://mesonbuild.com/Reference-tables.html#cpu-families
-def meson_cpu_family(var, d):
- import re
- arch = d.getVar(var)
- if arch == 'powerpc':
- return 'ppc'
- elif arch == 'powerpc64' or arch == 'powerpc64le':
- return 'ppc64'
- elif arch == 'armeb':
- return 'arm'
- elif arch == 'aarch64_be':
- return 'aarch64'
- elif arch == 'mipsel':
- return 'mips'
- elif arch == 'mips64el':
- return 'mips64'
- elif re.match(r"i[3-6]86", arch):
- return "x86"
- elif arch == "microblazeel":
- return "microblaze"
- else:
- return arch
-
-# Map our OS values to what Meson expects:
-# https://mesonbuild.com/Reference-tables.html#operating-system-names
-def meson_operating_system(var, d):
- os = d.getVar(var)
- if "mingw" in os:
- return "windows"
- # avoid e.g 'linux-gnueabi'
- elif "linux" in os:
- return "linux"
- else:
- return os
-
-def meson_endian(prefix, d):
- arch, os = d.getVar(prefix + "_ARCH"), d.getVar(prefix + "_OS")
- sitedata = siteinfo_data_for_machine(arch, os, d)
- if "endian-little" in sitedata:
- return "little"
- elif "endian-big" in sitedata:
- return "big"
- else:
- bb.fatal("Cannot determine endianism for %s-%s" % (arch, os))
-
addtask write_config before do_configure
do_write_config[vardeps] += "CC CXX LD AR NM STRIP READELF CFLAGS CXXFLAGS LDFLAGS"
do_write_config() {
diff --git a/poky/meta/classes/native.bbclass b/poky/meta/classes/native.bbclass
index a0838e4..561cc23 100644
--- a/poky/meta/classes/native.bbclass
+++ b/poky/meta/classes/native.bbclass
@@ -119,6 +119,7 @@
pn = e.data.getVar("PN")
if not pn.endswith("-native"):
return
+ bpn = e.data.getVar("BPN")
# Set features here to prevent appends and distro features backfill
# from modifying native distro features
@@ -146,7 +147,10 @@
elif "-cross-" in dep:
newdeps.append(dep.replace("-cross", "-native"))
elif not dep.endswith("-native"):
- newdeps.append(dep.replace("-native", "") + "-native")
+ # Replace ${PN} with ${BPN} in the dependency to make sure
+ # dependencies on, e.g., ${PN}-foo become ${BPN}-foo-native
+ # rather than ${BPN}-native-foo-native.
+ newdeps.append(dep.replace(pn, bpn) + "-native")
else:
newdeps.append(dep)
d.setVar(varname, " ".join(newdeps), parsing=True)
@@ -166,7 +170,7 @@
if prov.find(pn) != -1:
nprovides.append(prov)
elif not prov.endswith("-native"):
- nprovides.append(prov.replace(prov, prov + "-native"))
+ nprovides.append(prov + "-native")
else:
nprovides.append(prov)
e.data.setVar("PROVIDES", ' '.join(nprovides))
diff --git a/poky/meta/classes/npm.bbclass b/poky/meta/classes/npm.bbclass
index 55a6985..8f8712a 100644
--- a/poky/meta/classes/npm.bbclass
+++ b/poky/meta/classes/npm.bbclass
@@ -247,8 +247,10 @@
# Add node-gyp configuration
configs.append(("arch", d.getVar("NPM_ARCH")))
configs.append(("release", "true"))
- sysroot = d.getVar("RECIPE_SYSROOT_NATIVE")
- nodedir = os.path.join(sysroot, d.getVar("prefix_native").strip("/"))
+ nodedir = d.getVar("NPM_NODEDIR")
+ if not nodedir:
+ sysroot = d.getVar("RECIPE_SYSROOT_NATIVE")
+ nodedir = os.path.join(sysroot, d.getVar("prefix_native").strip("/"))
configs.append(("nodedir", nodedir))
configs.append(("python", d.getVar("PYTHON")))
diff --git a/poky/meta/classes/package_rpm.bbclass b/poky/meta/classes/package_rpm.bbclass
index 84a9a6d..86706da 100644
--- a/poky/meta/classes/package_rpm.bbclass
+++ b/poky/meta/classes/package_rpm.bbclass
@@ -684,8 +684,8 @@
cmd = cmd + " --define '_use_internal_dependency_generator 0'"
cmd = cmd + " --define '_binaries_in_noarch_packages_terminate_build 0'"
cmd = cmd + " --define '_build_id_links none'"
- cmd = cmd + " --define '_binary_payload w6T.xzdio'"
- cmd = cmd + " --define '_source_payload w6T.xzdio'"
+ cmd = cmd + " --define '_binary_payload w6T%d.xzdio'" % int(d.getVar("XZ_THREADS"))
+ cmd = cmd + " --define '_source_payload w6T%d.xzdio'" % int(d.getVar("XZ_THREADS"))
cmd = cmd + " --define 'clamp_mtime_to_source_date_epoch 1'"
cmd = cmd + " --define 'use_source_date_epoch_as_buildtime 1'"
cmd = cmd + " --define '_buildhost reproducible'"
diff --git a/poky/meta/classes/ptest.bbclass b/poky/meta/classes/ptest.bbclass
index 47611ed..4669162 100644
--- a/poky/meta/classes/ptest.bbclass
+++ b/poky/meta/classes/ptest.bbclass
@@ -20,6 +20,8 @@
PACKAGES =+ "${@bb.utils.contains('PTEST_ENABLED', '1', '${PN}-ptest', '', d)}"
+require conf/distro/include/ptest-packagelists.inc
+
do_configure_ptest() {
:
}
@@ -116,4 +118,13 @@
if not(d.getVar('PTEST_ENABLED') == "1"):
for i in ['do_configure_ptest_base', 'do_compile_ptest_base', 'do_install_ptest_base']:
bb.build.deltask(i, d)
+
+ # This checks that ptest package is actually included
+ # in standard oe-core ptest images - only for oe-core recipes
+ if not 'meta/recipes' in d.getVar('FILE') or not(d.getVar('PTEST_ENABLED') == "1"):
+ return
+
+ enabled_ptests = " ".join([d.getVar('PTESTS_FAST'),d.getVar('PTESTS_SLOW'), d.getVar('PTESTS_PROBLEMS')]).split()
+ if (d.getVar('PN') + "-ptest").replace(d.getVar('MLPREFIX'), '') not in enabled_ptests:
+ bb.error("Recipe %s supports ptests but is not included in oe-core's conf/distro/include/ptest-packagelists.inc" % d.getVar("PN"))
}
diff --git a/poky/meta/classes/qemuboot.bbclass b/poky/meta/classes/qemuboot.bbclass
index 1f8012e..2b50dda 100644
--- a/poky/meta/classes/qemuboot.bbclass
+++ b/poky/meta/classes/qemuboot.bbclass
@@ -19,6 +19,9 @@
# QB_CPU_KVM: the similar to QB_CPU, but used when kvm, e.g., '-cpu kvm64',
# set it when support kvm.
#
+# QB_SMP: amount of CPU cores inside qemu guest, each mapped to a thread on the host,
+# e.g. "-smp 8".
+#
# QB_KERNEL_CMDLINE_APPEND: options to append to kernel's -append
# option, e.g., "console=ttyS0 console=tty"
#
@@ -80,6 +83,7 @@
# See "runqemu help" for more info
QB_MEM ?= "-m 256"
+QB_SMP ?= ""
QB_SERIAL_OPT ?= "-serial mon:stdio -serial null"
QB_DEFAULT_KERNEL ?= "${KERNEL_IMAGETYPE}"
QB_DEFAULT_FSTYPE ?= "ext4"
diff --git a/poky/meta/classes/sstate.bbclass b/poky/meta/classes/sstate.bbclass
index b1c608d..3a3f7cc 100644
--- a/poky/meta/classes/sstate.bbclass
+++ b/poky/meta/classes/sstate.bbclass
@@ -319,6 +319,8 @@
if os.path.exists(i):
with open(i, "r") as f:
manifests = f.readlines()
+ # We append new entries, we don't remove older entries which may have the same
+ # manifest name but different versions from stamp/workdir. See below.
if filedata not in manifests:
with open(i, "a+") as f:
f.write(filedata)
@@ -704,6 +706,8 @@
return
+sstate_package[vardepsexclude] += "SSTATE_SIG_KEY"
+
def pstaging_fetch(sstatefetch, d):
import bb.fetch2
@@ -1183,11 +1187,21 @@
i = d.expand("${SSTATE_MANIFESTS}/index-" + a)
if not os.path.exists(i):
continue
+ manseen = set()
+ ignore = []
with open(i, "r") as f:
lines = f.readlines()
- for l in lines:
+ for l in reversed(lines):
try:
(stamp, manifest, workdir) = l.split()
+ # The index may have multiple entries for the same manifest as the code above only appends
+ # new entries and there may be an entry with matching manifest but differing version in stamp/workdir.
+ # The last entry in the list is the valid one, any earlier entries with matching manifests
+ # should be ignored.
+ if manifest in manseen:
+ ignore.append(l)
+ continue
+ manseen.add(manifest)
if stamp not in stamps and stamp not in preservestamps and stamp in machineindex:
toremove.append(l)
if stamp not in seen:
@@ -1218,6 +1232,8 @@
with open(i, "w") as f:
for l in lines:
+ if l in ignore:
+ continue
f.write(l)
machineindex |= set(stamps)
with open(mi, "w") as f:
diff --git a/poky/meta/classes/uboot-sign.bbclass b/poky/meta/classes/uboot-sign.bbclass
index d11882f..29b2edc 100644
--- a/poky/meta/classes/uboot-sign.bbclass
+++ b/poky/meta/classes/uboot-sign.bbclass
@@ -255,32 +255,7 @@
fi
}
-do_generate_rsa_keys() {
- if [ "${UBOOT_SIGN_ENABLE}" = "0" ] && [ "${FIT_GENERATE_KEYS}" = "1" ]; then
- bbwarn "FIT_GENERATE_KEYS is set to 1 even though UBOOT_SIGN_ENABLE is set to 0. The keys will not be generated as they won't be used."
- fi
-
- if [ "${UBOOT_SIGN_ENABLE}" = "1" ] && [ "${FIT_GENERATE_KEYS}" = "1" ]; then
-
- # Generate keys only if they don't already exist
- if [ ! -f "${UBOOT_SIGN_KEYDIR}/${UBOOT_SIGN_KEYNAME}".key ] || \
- [ ! -f "${UBOOT_SIGN_KEYDIR}/${UBOOT_SIGN_KEYNAME}".crt ]; then
-
- # make directory if it does not already exist
- mkdir -p "${UBOOT_SIGN_KEYDIR}"
-
- echo "Generating RSA private key for signing fitImage"
- openssl genrsa ${FIT_KEY_GENRSA_ARGS} -out \
- "${UBOOT_SIGN_KEYDIR}/${UBOOT_SIGN_KEYNAME}".key \
- "${FIT_SIGN_NUMBITS}"
-
- echo "Generating certificate for signing fitImage"
- openssl req ${FIT_KEY_REQ_ARGS} "${FIT_KEY_SIGN_PKCS}" \
- -key "${UBOOT_SIGN_KEYDIR}/${UBOOT_SIGN_KEYNAME}".key \
- -out "${UBOOT_SIGN_KEYDIR}/${UBOOT_SIGN_KEYNAME}".crt
- fi
- fi
-
+do_uboot_generate_rsa_keys() {
if [ "${SPL_SIGN_ENABLE}" = "0" ] && [ "${UBOOT_FIT_GENERATE_KEYS}" = "1" ]; then
bbwarn "UBOOT_FIT_GENERATE_KEYS is set to 1 eventhough SPL_SIGN_ENABLE is set to 0. The keys will not be generated as they won't be used."
fi
@@ -308,7 +283,7 @@
}
-addtask generate_rsa_keys before do_uboot_assemble_fitimage after do_compile
+addtask uboot_generate_rsa_keys before do_uboot_assemble_fitimage after do_compile
# Create a ITS file for the U-boot FIT, for use when
# we want to sign it so that the SPL can verify it
diff --git a/poky/meta/conf/bitbake.conf b/poky/meta/conf/bitbake.conf
index 4fa47d8..f451ba6 100644
--- a/poky/meta/conf/bitbake.conf
+++ b/poky/meta/conf/bitbake.conf
@@ -173,25 +173,25 @@
# python-native should be here but python relies on building
# its own in staging
ASSUME_PROVIDED = "\
+ bash-native \
bzip2-native \
chrpath-native \
+ diffstat-native \
file-native \
findutils-native \
gawk-native \
git-native \
grep-native \
- diffstat-native \
- patch-native \
- libgcc-native \
hostperl-runtime-native \
hostpython-runtime-native \
- tar-native \
- virtual/libintl-native \
- virtual/libiconv-native \
- virtual/crypt-native \
- texinfo-native \
- bash-native \
+ libgcc-native \
+ patch-native \
sed-native \
+ tar-native \
+ texinfo-native \
+ virtual/crypt-native \
+ virtual/libiconv-native \
+ virtual/libintl-native \
wget-native \
"
# gzip-native should be listed above?
diff --git a/poky/meta/conf/distro/include/cve-extra-exclusions.inc b/poky/meta/conf/distro/include/cve-extra-exclusions.inc
new file mode 100644
index 0000000..cf07acc
--- /dev/null
+++ b/poky/meta/conf/distro/include/cve-extra-exclusions.inc
@@ -0,0 +1,73 @@
+# This file contains a list of CVE's where resolution has proven to be impractical
+# or there is no reasonable action the Yocto Project can take to resolve the issue.
+# It contains all the information we are aware of about an issue and analysis about
+# why we believe it can't be fixed/handled. Additional information is welcome through
+# patches to the file.
+#
+# Include this file in your local.conf or distro.conf to exclude these CVE's
+# from the cve-check results or add to the bitbake command with:
+# -R conf/distro/include/cve-extra-exclusions.inc
+#
+# The file is not included by default since users should review this data to ensure
+# it matches their expectations and usage of the project.
+#
+# We may also include "in-flight" information about current/ongoing CVE work with
+# the aim of sharing that work and ensuring we don't duplicate it.
+#
+
+
+# strace https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2000-0006
+# CVE is more than 20 years old with no resolution evident
+# broken links in CVE database references make resolution impractical
+CVE_CHECK_WHITELIST += "CVE-2000-0006"
+
+# epiphany https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2005-0238
+# The issue here is spoofing of domain names using characters from other character sets.
+# There has been much discussion amongst the epiphany and webkit developers and
+# whilst there are improvements about how domains are handled and displayed to the user
+# there is unlikely ever to be a single fix to webkit or epiphany which addresses this
+# problem. Whitelisted as there isn't any mitigation or fix or way to progress this further
+# we can seem to take.
+CVE_CHECK_WHITELIST += "CVE-2005-0238"
+
+# glibc https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2010-4756
+# Issue is memory exhaustion via glob() calls, e.g. from within an ftp server
+# Best discussion in https://bugzilla.redhat.com/show_bug.cgi?id=681681
+# Upstream don't see it as a security issue, ftp servers shouldn't be passing
+# this to libc glob. Exclude as upstream have no plans to add BSD's GLOB_LIMIT or similar
+CVE_CHECK_WHITELIST += "CVE-2010-4756"
+
+# go https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2020-29509
+# go https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2020-29511
+# The encoding/xml package in go can potentially be used for security exploits if not used correctly
+# CVE applies to a netapp product as well as flagging a general issue. We don't ship anything
+# exposing this interface in an exploitable way
+CVE_CHECK_WHITELIST += "CVE-2020-29509 CVE-2020-29511"
+
+
+
+#### CPE update pending ####
+
+# groff:groff-native https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2000-0803
+# Appears it was fixed in https://git.savannah.gnu.org/cgit/groff.git/commit/?id=07f95f1674217275ed4612f1dcaa95a88435c6a7
+# so from 1.17 onwards. Reported to the database for update by RP 2021/5/9. Update accepted 2021/5/10.
+#CVE_CHECK_WHITELIST += "CVE-2000-0803"
+
+
+
+#### Upstream still working on ####
+
+# qemu:qemu-native:qemu-system-native https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2021-20255
+# There was a proposed patch https://lists.gnu.org/archive/html/qemu-devel/2021-02/msg06098.html
+# however qemu maintainers are sure the patch is incorrect and should not be applied.
+
+# flex:flex-native https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-6293
+# Upstream bug, still open: https://github.com/westes/flex/issues/414
+# Causes memory exhaustion so potential DoS but no buffer overflow, low priority
+
+# wget https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2021-31879
+# https://mail.gnu.org/archive/html/bug-wget/2021-02/msg00002.html
+# No response upstream as of 2021/5/12
+
+
+
diff --git a/poky/meta/conf/distro/include/maintainers.inc b/poky/meta/conf/distro/include/maintainers.inc
index 140f7b4..fa7eb9d 100644
--- a/poky/meta/conf/distro/include/maintainers.inc
+++ b/poky/meta/conf/distro/include/maintainers.inc
@@ -111,19 +111,17 @@
RECIPE_MAINTAINER_pn-core-image-tiny-initramfs = "Richard Purdie <richard.purdie@linuxfoundation.org>"
RECIPE_MAINTAINER_pn-core-image-full-cmdline = "Richard Purdie <richard.purdie@linuxfoundation.org>"
RECIPE_MAINTAINER_pn-core-image-kernel-dev = "Richard Purdie <richard.purdie@linuxfoundation.org>"
+RECIPE_MAINTAINER_pn-core-image-ptest-all = "Richard Purdie <richard.purdie@linuxfoundation.org>"
+RECIPE_MAINTAINER_pn-core-image-ptest-fast = "Richard Purdie <richard.purdie@linuxfoundation.org>"
RECIPE_MAINTAINER_pn-core-image-sato = "Richard Purdie <richard.purdie@linuxfoundation.org>"
RECIPE_MAINTAINER_pn-core-image-sato-sdk = "Richard Purdie <richard.purdie@linuxfoundation.org>"
RECIPE_MAINTAINER_pn-core-image-testmaster-initramfs = "Richard Purdie <richard.purdie@linuxfoundation.org>"
RECIPE_MAINTAINER_pn-core-image-testmaster = "Richard Purdie <richard.purdie@linuxfoundation.org>"
RECIPE_MAINTAINER_pn-core-image-clutter = "Richard Purdie <richard.purdie@linuxfoundation.org>"
RECIPE_MAINTAINER_pn-core-image-weston = "Richard Purdie <richard.purdie@linuxfoundation.org>"
-RECIPE_MAINTAINER_pn-core-image-weston-ptest-all = "Richard Purdie <richard.purdie@linuxfoundation.org>"
-RECIPE_MAINTAINER_pn-core-image-weston-ptest-fast = "Richard Purdie <richard.purdie@linuxfoundation.org>"
RECIPE_MAINTAINER_pn-core-image-weston-sdk = "Richard Purdie <richard.purdie@linuxfoundation.org>"
RECIPE_MAINTAINER_pn-core-image-x11 = "Richard Purdie <richard.purdie@linuxfoundation.org>"
RECIPE_MAINTAINER_pn-core-image-sato-dev = "Richard Purdie <richard.purdie@linuxfoundation.org>"
-RECIPE_MAINTAINER_pn-core-image-sato-ptest-fast = "Richard Purdie <richard.purdie@linuxfoundation.org>"
-RECIPE_MAINTAINER_pn-core-image-sato-sdk-ptest = "Richard Purdie <richard.purdie@linuxfoundation.org>"
RECIPE_MAINTAINER_pn-coreutils = "Chen Qi <Qi.Chen@windriver.com>"
RECIPE_MAINTAINER_pn-cpio = "Denys Dmytriyenko <denis@denix.org>"
RECIPE_MAINTAINER_pn-cracklib = "Armin Kuster <akuster808@gmail.com>"
@@ -171,6 +169,7 @@
RECIPE_MAINTAINER_pn-enchant2 = "Anuj Mittal <anuj.mittal@intel.com>"
RECIPE_MAINTAINER_pn-encodings = "Armin Kuster <akuster808@gmail.com>"
RECIPE_MAINTAINER_pn-epiphany = "Alexander Kanavin <alex.kanavin@gmail.com>"
+RECIPE_MAINTAINER_pn-erofs-utils = "Richard Weinberger <richard@nod.at>"
RECIPE_MAINTAINER_pn-ethtool = "Changhyeok Bae <changhyeok.bae@gmail.com>"
RECIPE_MAINTAINER_pn-eudev = "Anuj Mittal <anuj.mittal@intel.com>"
RECIPE_MAINTAINER_pn-expat = "Yi Zhao <yi.zhao@windriver.com>"
@@ -205,6 +204,7 @@
RECIPE_MAINTAINER_pn-gettext = "Robert Yang <liezhi.yang@windriver.com>"
RECIPE_MAINTAINER_pn-gettext-minimal-native = "Robert Yang <liezhi.yang@windriver.com>"
RECIPE_MAINTAINER_pn-ghostscript = "Hongxu Jia <hongxu.jia@windriver.com>"
+RECIPE_MAINTAINER_pn-gi-docgen = "Alexander Kanavin <alex.kanavin@gmail.com>"
RECIPE_MAINTAINER_pn-git = "Robert Yang <liezhi.yang@windriver.com>"
RECIPE_MAINTAINER_pn-glew = "Anuj Mittal <anuj.mittal@intel.com>"
RECIPE_MAINTAINER_pn-glib-2.0 = "Anuj Mittal <anuj.mittal@intel.com>"
@@ -507,7 +507,6 @@
RECIPE_MAINTAINER_pn-mini-x-session = "Armin Kuster <akuster808@gmail.com>"
RECIPE_MAINTAINER_pn-minicom = "Anuj Mittal <anuj.mittal@intel.com>"
RECIPE_MAINTAINER_pn-mkfontscale = "Armin Kuster <akuster808@gmail.com>"
-RECIPE_MAINTAINER_pn-mklibs-native = "Robert Yang <liezhi.yang@windriver.com>"
RECIPE_MAINTAINER_pn-mmc-utils = "Anuj Mittal <anuj.mittal@intel.com>"
RECIPE_MAINTAINER_pn-mobile-broadband-provider-info = "Alexander Kanavin <alex.kanavin@gmail.com>"
RECIPE_MAINTAINER_pn-modutils-initscripts = "Yi Zhao <yi.zhao@windriver.com>"
@@ -608,6 +607,7 @@
RECIPE_MAINTAINER_pn-python3-libarchive-c = "Joshua Watt <JPEWhacker@gmail.com>"
RECIPE_MAINTAINER_pn-python3-magic = "Joshua Watt <JPEWhacker@gmail.com>"
RECIPE_MAINTAINER_pn-python3-mako = "Oleksandr Kravchuk <open.source@oleksandr-kravchuk.com>"
+RECIPE_MAINTAINER_pn-python3-markdown = "Alexander Kanavin <alex.kanavin@gmail.com>"
RECIPE_MAINTAINER_pn-python3-markupsafe = "Richard Purdie <richard.purdie@linuxfoundation.org>"
RECIPE_MAINTAINER_pn-python3-more-itertools = "Tim Orling <timothy.t.orling@linux.intel.com>"
RECIPE_MAINTAINER_pn-python3-nose = "Oleksandr Kravchuk <open.source@oleksandr-kravchuk.com>"
@@ -630,11 +630,13 @@
RECIPE_MAINTAINER_pn-python3-setuptools = "Oleksandr Kravchuk <open.source@oleksandr-kravchuk.com>"
RECIPE_MAINTAINER_pn-python3-setuptools-scm = "Tim Orling <timothy.t.orling@linux.intel.com>"
RECIPE_MAINTAINER_pn-python3-six = "Zang Ruochen <zangrc.fnst@fujitsu.com>"
+RECIPE_MAINTAINER_pn-python3-smartypants = "Alexander Kanavin <alex.kanavin@gmail.com>"
RECIPE_MAINTAINER_pn-python3-smmap = "Oleksandr Kravchuk <open.source@oleksandr-kravchuk.com>"
RECIPE_MAINTAINER_pn-python3-sortedcontainers = "Tim Orling <timothy.t.orling@linux.intel.com>"
RECIPE_MAINTAINER_pn-python3-subunit = "Oleksandr Kravchuk <open.source@oleksandr-kravchuk.com>"
RECIPE_MAINTAINER_pn-python3-testtools = "Oleksandr Kravchuk <open.source@oleksandr-kravchuk.com>"
RECIPE_MAINTAINER_pn-python3-toml = "Tim Orling <timothy.t.orling@linux.intel.com>"
+RECIPE_MAINTAINER_pn-python3-typogrify = "Alexander Kanavin <alex.kanavin@gmail.com>"
RECIPE_MAINTAINER_pn-python3-wcwidth = "Tim Orling <timothy.t.orling@linux.intel.com>"
RECIPE_MAINTAINER_pn-python3-zipp = "Tim Orling <timothy.t.orling@linux.intel.com>"
RECIPE_MAINTAINER_pn-qemu = "Richard Purdie <richard.purdie@linuxfoundation.org>"
diff --git a/poky/meta/conf/distro/include/ptest-packagelists.inc b/poky/meta/conf/distro/include/ptest-packagelists.inc
index e0a876d..aef7034 100644
--- a/poky/meta/conf/distro/include/ptest-packagelists.inc
+++ b/poky/meta/conf/distro/include/ptest-packagelists.inc
@@ -14,17 +14,21 @@
diffutils-ptest \
elfutils-ptest \
ethtool-ptest \
+ expat-ptest \
flex-ptest \
gawk-ptest \
gdbm-ptest \
gdk-pixbuf-ptest \
gettext-ptest \
+ glib-networking-ptest \
gzip-ptest \
json-glib-ptest \
libconvert-asn1-perl-ptest \
liberror-perl-ptest \
+ libnl-ptest \
libmodule-build-perl-ptest \
libpcre-ptest \
+ libssh2-ptest \
libtimedate-perl-ptest \
libtest-needs-perl-ptest \
liburi-perl-ptest \
@@ -43,6 +47,12 @@
opkg-ptest \
pango-ptest \
parted-ptest \
+ python3-atomicwrites-ptest \
+ python3-jinja2-ptest \
+ python3-markupsafe-ptest \
+ python3-more-itertools-ptest \
+ python3-pluggy-ptest \
+ python3-wcwidth-ptest \
qemu-ptest \
quilt-ptest \
sed-ptest \
@@ -51,17 +61,7 @@
zlib-ptest \
"
PTESTS_FAST_remove_mips64 = "qemu-ptest"
-
-#PTESTS_PROBLEMS = "\
-# ruby-ptest \ # Timeout
-# clutter-1.0-ptest \ # Doesn't build due to depends on cogl-1.0
-# lz4-ptest \ # Needs a rewrite
-# rt-tests-ptest \ # Needs to be checked whether it runs at all
-# bash-ptest \ # Test outcomes are non-deterministic by design
-# ifupdown-ptest \ # Tested separately in lib/oeqa/selftest/cases/imagefeatures.py
-# mdadm-ptest \ # Tests rely on non-deterministic sleep() amounts
-# libinput-ptest \ # Tests need an unloaded system to be reliable
-#"
+PTESTS_PROBLEMS_append_mips64 = "qemu-ptest"
PTESTS_SLOW = "\
babeltrace-ptest \
@@ -85,3 +85,32 @@
"
PTESTS_SLOW_remove_riscv64 = "valgrind-ptest"
+PTESTS_PROBLEMS_append_riscv64 = "valgrind-ptest"
+
+# ruby-ptest \ # Timeout
+# clutter-1.0-ptest \ # Doesn't build due to depends on cogl-1.0
+# lz4-ptest \ # Needs a rewrite
+# rt-tests-ptest \ # Needs to be checked whether it runs at all
+# bash-ptest \ # Test outcomes are non-deterministic by design
+# ifupdown-ptest \ # Tested separately in lib/oeqa/selftest/cases/imagefeatures.py
+# mdadm-ptest \ # Tests rely on non-deterministic sleep() amounts
+# libinput-ptest \ # Tests need an unloaded system to be reliable
+# libpam-ptest \ # Needs pam DISTRO_FEATURE
+# numactl-ptest \ # qemu not (yet) configured for numa; all tests are skipped
+# libseccomp-ptest \ # tests failed: 38; add to slow tests once addressed
+# python3-numpy-ptest \ # requires even more RAM and (possibly) disk space; multiple failures
+
+PTESTS_PROBLEMS = "\
+ ruby-ptest \
+ clutter-1.0-ptest \
+ lz4-ptest \
+ rt-tests-ptest \
+ bash-ptest \
+ ifupdown-ptest \
+ mdadm-ptest \
+ libinput-ptest \
+ libpam-ptest \
+ libseccomp-ptest \
+ numactl-ptest \
+ python3-numpy-ptest \
+"
diff --git a/poky/meta/conf/distro/include/tcmode-default.inc b/poky/meta/conf/distro/include/tcmode-default.inc
index a0c35ee..c6e5ac6 100644
--- a/poky/meta/conf/distro/include/tcmode-default.inc
+++ b/poky/meta/conf/distro/include/tcmode-default.inc
@@ -22,7 +22,7 @@
GDBVERSION ?= "10.%"
GLIBCVERSION ?= "2.33"
LINUXLIBCVERSION ?= "5.10%"
-QEMUVERSION ?= "5.2%"
+QEMUVERSION ?= "6.0%"
GOVERSION ?= "1.16%"
# This can not use wildcards like 8.0.% since it is also used in mesa to denote
# llvm version being used, so always bump it with llvm recipe version bump
diff --git a/poky/meta/conf/distro/include/yocto-uninative.inc b/poky/meta/conf/distro/include/yocto-uninative.inc
index 05b79d1..740cca0 100644
--- a/poky/meta/conf/distro/include/yocto-uninative.inc
+++ b/poky/meta/conf/distro/include/yocto-uninative.inc
@@ -8,7 +8,7 @@
UNINATIVE_MAXGLIBCVERSION = "2.33"
-UNINATIVE_URL ?= "http://downloads.yoctoproject.org/releases/uninative/3.1/"
-UNINATIVE_CHECKSUM[aarch64] ?= "7fa12b9fe7a95934cc09beb0e8a25ff97179ef3105116015d32548eadd27b024"
-UNINATIVE_CHECKSUM[i686] ?= "bbfcdd48336800b5af97e294918c6586a0a8fa903f127f813b0bd5110de8c55c"
-UNINATIVE_CHECKSUM[x86_64] ?= "5d0611df544edff6428cef7d871257a91aa6ba1bd92f5365a2df8deb54b6b31e"
+UNINATIVE_URL ?= "http://downloads.yoctoproject.org/releases/uninative/3.2/"
+UNINATIVE_CHECKSUM[aarch64] ?= "4f0872cdca2775b637a8a99815ca5c8dd42146abe903a24a50ee0448358c764b"
+UNINATIVE_CHECKSUM[i686] ?= "e2eeab92e67263db37d9bb6d4c58579abd1f47ff4cded3171bde572fece124b2"
+UNINATIVE_CHECKSUM[x86_64] ?= "3ee8c7d55e2d4c7ae3887cddb97219f97b94efddfeee2e24923c0cb0e8ce84c6"
diff --git a/poky/meta/conf/machine/include/qemuboot-x86.inc b/poky/meta/conf/machine/include/qemuboot-x86.inc
index 2a4760c..a2dcdc6 100644
--- a/poky/meta/conf/machine/include/qemuboot-x86.inc
+++ b/poky/meta/conf/machine/include/qemuboot-x86.inc
@@ -1,13 +1,14 @@
# For runqemu
IMAGE_CLASSES += "qemuboot"
-QB_CPU_x86 = "-cpu core2duo"
-QB_CPU_KVM_x86 = "-cpu core2duo"
+QB_SMP = "-smp 4"
+QB_CPU_x86 = "-cpu IvyBridge -machine q35"
+QB_CPU_KVM_x86 = "-cpu IvyBridge -machine q35"
-QB_CPU_x86-64 = "-cpu core2duo"
-QB_CPU_KVM_x86-64 = "-cpu core2duo"
+QB_CPU_x86-64 = "-cpu IvyBridge -machine q35"
+QB_CPU_KVM_x86-64 = "-cpu IvyBridge -machine q35"
QB_AUDIO_DRV = "alsa"
QB_AUDIO_OPT = "-soundhw ac97,es1370"
-QB_KERNEL_CMDLINE_APPEND = "oprofile.timer=1"
+QB_KERNEL_CMDLINE_APPEND = "oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1"
QB_OPT_APPEND = "-usb -device usb-tablet"
diff --git a/poky/meta/conf/machine/qemuarm.conf b/poky/meta/conf/machine/qemuarm.conf
index e5ec4cc..34fcde6 100644
--- a/poky/meta/conf/machine/qemuarm.conf
+++ b/poky/meta/conf/machine/qemuarm.conf
@@ -16,6 +16,7 @@
QB_SYSTEM_NAME = "qemu-system-arm"
QB_MACHINE = "-machine virt,highmem=off"
QB_CPU = "-cpu cortex-a15"
+QB_SMP = "-smp 4"
# Standard Serial console
QB_KERNEL_CMDLINE_APPEND = "vmalloc=256"
# For graphics to work we need to define the VGA device as well as the necessary USB devices
diff --git a/poky/meta/conf/machine/qemuarm64.conf b/poky/meta/conf/machine/qemuarm64.conf
index 51f7ecd..150a074 100644
--- a/poky/meta/conf/machine/qemuarm64.conf
+++ b/poky/meta/conf/machine/qemuarm64.conf
@@ -16,6 +16,7 @@
QB_SYSTEM_NAME = "qemu-system-aarch64"
QB_MACHINE = "-machine virt"
QB_CPU = "-cpu cortex-a57"
+QB_SMP = "-smp 4"
QB_CPU_KVM = "-cpu host -machine gic-version=3"
# For graphics to work we need to define the VGA device as well as the necessary USB devices
QB_GRAPHICS = "-device VGA,edid=on"
diff --git a/poky/meta/lib/oe/gpg_sign.py b/poky/meta/lib/oe/gpg_sign.py
index 7634d7e..492f096 100644
--- a/poky/meta/lib/oe/gpg_sign.py
+++ b/poky/meta/lib/oe/gpg_sign.py
@@ -111,7 +111,7 @@
def verify(self, sig_file):
"""Verify signature"""
- cmd = self.gpg_cmd + [" --verify", "--no-permission-warning"]
+ cmd = self.gpg_cmd + ["--verify", "--no-permission-warning"]
if self.gpg_path:
cmd += ["--homedir", self.gpg_path]
diff --git a/poky/meta/lib/oe/package_manager/rpm/__init__.py b/poky/meta/lib/oe/package_manager/rpm/__init__.py
index 6df0092..b3925810 100644
--- a/poky/meta/lib/oe/package_manager/rpm/__init__.py
+++ b/poky/meta/lib/oe/package_manager/rpm/__init__.py
@@ -199,6 +199,9 @@
failed_scriptlets_pkgnames = collections.OrderedDict()
for line in output.splitlines():
+ if line.startswith("Error: Systemctl"):
+ bb.error(line)
+
if line.startswith("Error in POSTIN scriptlet in rpm package"):
failed_scriptlets_pkgnames[line.split()[-1]] = True
diff --git a/poky/meta/lib/oe/rootfs.py b/poky/meta/lib/oe/rootfs.py
index 4b48cdb..ad9fd77 100644
--- a/poky/meta/lib/oe/rootfs.py
+++ b/poky/meta/lib/oe/rootfs.py
@@ -167,7 +167,7 @@
pass
bb.utils.rename(self.image_rootfs, self.image_rootfs + '-dbg')
- bb.note(" Restoreing original rootfs...")
+ bb.note(" Restoring original rootfs...")
bb.utils.rename(self.image_rootfs + '-orig', self.image_rootfs)
def _exec_shell_cmd(self, cmd):
diff --git a/poky/meta/lib/oe/sstatesig.py b/poky/meta/lib/oe/sstatesig.py
index 6cd6e11..e86a09b 100644
--- a/poky/meta/lib/oe/sstatesig.py
+++ b/poky/meta/lib/oe/sstatesig.py
@@ -453,7 +453,7 @@
manifest = d2.expand("${SSTATE_MANIFESTS}/manifest-%s-%s.%s" % (pkgarch, taskdata, taskname))
if os.path.exists(manifest):
return manifest, d2
- bb.error("Manifest %s not found in %s (variant '%s')?" % (manifest, d2.expand(" ".join(pkgarchs)), variant))
+ bb.fatal("Manifest %s not found in %s (variant '%s')?" % (manifest, d2.expand(" ".join(pkgarchs)), variant))
return None, d2
def OEOuthashBasic(path, sigfile, task, d):
diff --git a/poky/meta/lib/oeqa/runtime/cases/rpm.py b/poky/meta/lib/oeqa/runtime/cases/rpm.py
index 8e18b42..7a9d62c 100644
--- a/poky/meta/lib/oeqa/runtime/cases/rpm.py
+++ b/poky/meta/lib/oeqa/runtime/cases/rpm.py
@@ -141,13 +141,4 @@
self.tc.target.run('rm -f %s' % self.dst)
- # if using systemd this should ensure all entries are flushed to /var
- status, output = self.target.run("journalctl --sync")
- # Get the amount of entries in the log file
- status, output = self.target.run(check_log_cmd)
- msg = 'Failed to get the final size of the log file.'
- self.assertEqual(0, status, msg=msg)
- # Check that there's enough of them
- self.assertGreaterEqual(int(output), 80,
- 'Cound not find sufficient amount of rpm entries in /var/log/messages, found {} entries'.format(output))
diff --git a/poky/meta/lib/oeqa/utils/qemurunner.py b/poky/meta/lib/oeqa/utils/qemurunner.py
index 69fee27..0032f6e 100644
--- a/poky/meta/lib/oeqa/utils/qemurunner.py
+++ b/poky/meta/lib/oeqa/utils/qemurunner.py
@@ -73,6 +73,8 @@
self.monitorpipe = None
self.logger = logger
+ # Whether we're expecting an exit and should show related errors
+ self.canexit = False
# Enable testing other OS's
# Set commands for target communication, and default to Linux ALWAYS
@@ -275,14 +277,33 @@
if self.runqemu_exited:
self.logger.warning("runqemu after timeout")
- return False
if self.runqemu.returncode:
self.logger.warning('runqemu exited with code %d' % self.runqemu.returncode)
- return False
if not self.is_alive():
- self.logger.warning('is_alive() failed later')
+ self.logger.error("Qemu pid didn't appear in %s seconds (%s)" %
+ (self.runqemutime, time.strftime("%D %H:%M:%S")))
+
+ qemu_pid = None
+ if os.path.isfile(self.qemu_pidfile):
+ with open(self.qemu_pidfile, 'r') as f:
+ qemu_pid = f.read().strip()
+
+ self.logger.error("Status information, poll status: %s, pidfile exists: %s, pidfile contents %s, proc pid exists %s"
+ % (self.runqemu.poll(), os.path.isfile(self.qemu_pidfile), str(qemu_pid), os.path.exists("/proc/" + str(qemu_pid))))
+
+ # Dump all processes to help us to figure out what is going on...
+ ps = subprocess.Popen(['ps', 'axww', '-o', 'pid,ppid,pri,ni,command '], stdout=subprocess.PIPE).communicate()[0]
+ processes = ps.decode("utf-8")
+ self.logger.debug("Running processes:\n%s" % processes)
+ self._dump_host()
+ op = self.getOutput(output)
+ self.stop()
+ if op:
+ self.logger.error("Output from runqemu:\n%s" % op)
+ else:
+ self.logger.error("No output from runqemu.\n")
return False
# Create the client socket for the QEMU Monitor Control Socket
@@ -324,31 +345,6 @@
# Release the qemu porcess to continue running
self.run_monitor('cont')
- if not self.is_alive():
- self.logger.error("Qemu pid didn't appear in %s seconds (%s)" %
- (self.runqemutime, time.strftime("%D %H:%M:%S")))
-
- qemu_pid = None
- if os.path.isfile(self.qemu_pidfile):
- with open(self.qemu_pidfile, 'r') as f:
- qemu_pid = f.read().strip()
-
- self.logger.error("Status information, poll status: %s, pidfile exists: %s, pidfile contents %s, proc pid exists %s"
- % (self.runqemu.poll(), os.path.isfile(self.qemu_pidfile), str(qemu_pid), os.path.exists("/proc/" + str(qemu_pid))))
-
- # Dump all processes to help us to figure out what is going on...
- ps = subprocess.Popen(['ps', 'axww', '-o', 'pid,ppid,pri,ni,command '], stdout=subprocess.PIPE).communicate()[0]
- processes = ps.decode("utf-8")
- self.logger.debug("Running processes:\n%s" % processes)
- self._dump_host()
- op = self.getOutput(output)
- self.stop()
- if op:
- self.logger.error("Output from runqemu:\n%s" % op)
- else:
- self.logger.error("No output from runqemu.\n")
- return False
-
# We are alive: qemu is running
out = self.getOutput(output)
netconf = False # network configuration is not required by default
@@ -543,6 +539,7 @@
self.thread.join()
def allowexit(self):
+ self.canexit = True
if self.thread:
self.thread.allowexit()
@@ -604,7 +601,9 @@
if re.search(self.boot_patterns['search_cmd_finished'], data):
break
else:
- raise Exception("No data on serial console socket")
+ if self.canexit:
+ return (1, "")
+ raise Exception("No data on serial console socket, connection closed?")
if data:
if raw:
@@ -724,7 +723,7 @@
data = self.readsock.recv(count)
except socket.error as e:
if e.errno == errno.EAGAIN or e.errno == errno.EWOULDBLOCK:
- return ''
+ return b''
else:
raise
@@ -737,7 +736,7 @@
# until qemu exits.
if not self.canexit:
raise Exception("Console connection closed unexpectedly")
- return ''
+ return b''
return data
diff --git a/poky/meta/recipes-bsp/gnu-efi/gnu-efi_3.0.12.bb b/poky/meta/recipes-bsp/gnu-efi/gnu-efi_3.0.13.bb
similarity index 94%
rename from poky/meta/recipes-bsp/gnu-efi/gnu-efi_3.0.12.bb
rename to poky/meta/recipes-bsp/gnu-efi/gnu-efi_3.0.13.bb
index d271266..fa98860 100644
--- a/poky/meta/recipes-bsp/gnu-efi/gnu-efi_3.0.12.bb
+++ b/poky/meta/recipes-bsp/gnu-efi/gnu-efi_3.0.13.bb
@@ -19,8 +19,7 @@
file://gnu-efi-3.0.9-fix-clang-build.patch \
"
-SRC_URI[md5sum] = "926763ff37bc9db3a9035cec41eb2f45"
-SRC_URI[sha256sum] = "0196f2e1fd3c334b66e610a608a0e59233474c7a01bec7bc53989639aa327669"
+SRC_URI[sha256sum] = "2fccf715279c46ee69c4859186af8150d07a13f4d19876e5459cd65be82d3b7d"
COMPATIBLE_HOST = "(x86_64.*|i.86.*|aarch64.*|arm.*)-linux"
COMPATIBLE_HOST_armv4 = 'null'
diff --git a/poky/meta/recipes-bsp/grub/grub2.inc b/poky/meta/recipes-bsp/grub/grub2.inc
index 590deb8..3c6b434 100644
--- a/poky/meta/recipes-bsp/grub/grub2.inc
+++ b/poky/meta/recipes-bsp/grub/grub2.inc
@@ -27,6 +27,16 @@
REALPV = "2.06~rc1"
PV = "2.04+${REALPV}"
+# Fixed in 2.06~rc1, can be removed for 2.06 final
+CVE_CHECK_WHITELIST += "\
+ CVE-2020-14308 CVE-2020-14309 CVE-2020-14310 CVE-2020-14311 CVE-2020-10713 \
+ CVE-2020-14372 CVE-2020-15705 CVE-2020-15706 CVE-2020-15707 \
+ CVE-2020-25632 CVE-2020-25647 CVE-2020-27749 CVE-2020-27779 \
+ CVE-2021-3418 CVE-2021-20225 CVE-2021-20233"
+
+# Applies only to RHEL
+CVE_CHECK_WHITELIST += "CVE-2019-14865"
+
S = "${WORKDIR}/grub-${REALPV}"
UPSTREAM_CHECK_URI = "${GNU_MIRROR}/grub"
@@ -49,6 +59,8 @@
inherit autotools gettext texinfo pkgconfig
+CFLAGS_remove = "-O2"
+
EXTRA_OECONF = "--with-platform=${GRUBPLATFORM} \
--disable-grub-mkfont \
--program-prefix="" \
diff --git a/poky/meta/recipes-bsp/u-boot/files/0001-add-valid-fdt-check.patch b/poky/meta/recipes-bsp/u-boot/files/0001-add-valid-fdt-check.patch
deleted file mode 100644
index d4ac9e2..0000000
--- a/poky/meta/recipes-bsp/u-boot/files/0001-add-valid-fdt-check.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From ea1a9ec5f430359720d9a0621ed1acfbba6a142a Mon Sep 17 00:00:00 2001
-From: Heinrich Schuchardt <xypron.glpk@gmx.de>
-Date: Wed, 13 Jan 2021 02:09:12 +0100
-Subject: [PATCH] image-fit: fit_check_format check for valid FDT
-
-fit_check_format() must check that the buffer contains a flattened device
-tree before calling any device tree library functions.
-
-Failure to do may cause segmentation faults.
-
-Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
-
-Upstream-Status: Backport[https://github.com/u-boot/u-boot/commit/ea1a9ec5f430359720d9a0621ed1acfbba6a142a]
-Signed-off-by: Scott Murray <scott.murray@konsulko.com>
-
----
- common/image-fit.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
-diff --git a/common/image-fit.c b/common/image-fit.c
-index 6a8787ca0a..21c44bdf69 100644
---- a/common/image-fit.c
-+++ b/common/image-fit.c
-@@ -1553,6 +1553,12 @@ int fit_image_check_comp(const void *fit, int noffset, uint8_t comp)
- */
- int fit_check_format(const void *fit)
- {
-+ /* A FIT image must be a valid FDT */
-+ if (fdt_check_header(fit)) {
-+ debug("Wrong FIT format: not a flattened device tree\n");
-+ return 0;
-+ }
-+
- /* mandatory / node 'description' property */
- if (fdt_getprop(fit, 0, FIT_DESC_PROP, NULL) == NULL) {
- debug("Wrong FIT format: no description\n");
diff --git a/poky/meta/recipes-bsp/u-boot/files/CVE-2021-27097-1.patch b/poky/meta/recipes-bsp/u-boot/files/CVE-2021-27097-1.patch
deleted file mode 100644
index 98ec2c7..0000000
--- a/poky/meta/recipes-bsp/u-boot/files/CVE-2021-27097-1.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From 8a7d4cf9820ea16fabd25a6379351b4dc291204b Mon Sep 17 00:00:00 2001
-From: Simon Glass <sjg@chromium.org>
-Date: Mon, 15 Feb 2021 17:08:05 -0700
-Subject: [PATCH] fdt_region: Check for a single root node of the correct name
-
-At present fdt_find_regions() assumes that the FIT is a valid devicetree.
-If the FIT has two root nodes this is currently not detected in this
-function, nor does libfdt's fdt_check_full() notice. Also it is possible
-for the root node to have a name even though it should not.
-
-Add checks for these and return -FDT_ERR_BADSTRUCTURE if a problem is
-detected.
-
-CVE-2021-27097
-
-Signed-off-by: Simon Glass <sjg@chromium.org>
-Reported-by: Bruce Monroe <bruce.monroe@intel.com>
-Reported-by: Arie Haenel <arie.haenel@intel.com>
-Reported-by: Julien Lenoir <julien.lenoir@intel.com>
-
-CVE: CVE-2021-27097
-Upstream-Status: Backport[https://github.com/u-boot/u-boot/commit/8a7d4cf9820ea16fabd25a6379351b4dc291204b]
-Signed-off-by: Scott Murray <scott.murray@konsulko.com>
-
----
- common/fdt_region.c | 11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/common/fdt_region.c b/common/fdt_region.c
-index ff12c518e9..e4ef0ca770 100644
---- a/common/fdt_region.c
-+++ b/common/fdt_region.c
-@@ -43,6 +43,7 @@ int fdt_find_regions(const void *fdt, char * const inc[], int inc_count,
- int depth = -1;
- int want = 0;
- int base = fdt_off_dt_struct(fdt);
-+ bool expect_end = false;
-
- end = path;
- *end = '\0';
-@@ -59,6 +60,10 @@ int fdt_find_regions(const void *fdt, char * const inc[], int inc_count,
- tag = fdt_next_tag(fdt, offset, &nextoffset);
- stop_at = nextoffset;
-
-+ /* If we see two root nodes, something is wrong */
-+ if (expect_end && tag != FDT_END)
-+ return -FDT_ERR_BADLAYOUT;
-+
- switch (tag) {
- case FDT_PROP:
- include = want >= 2;
-@@ -81,6 +86,10 @@ int fdt_find_regions(const void *fdt, char * const inc[], int inc_count,
- if (depth == FDT_MAX_DEPTH)
- return -FDT_ERR_BADSTRUCTURE;
- name = fdt_get_name(fdt, offset, &len);
-+
-+ /* The root node must have an empty name */
-+ if (!depth && *name)
-+ return -FDT_ERR_BADLAYOUT;
- if (end - path + 2 + len >= path_len)
- return -FDT_ERR_NOSPACE;
- if (end != path + 1)
-@@ -108,6 +117,8 @@ int fdt_find_regions(const void *fdt, char * const inc[], int inc_count,
- while (end > path && *--end != '/')
- ;
- *end = '\0';
-+ if (depth == -1)
-+ expect_end = true;
- break;
-
- case FDT_END:
diff --git a/poky/meta/recipes-bsp/u-boot/files/CVE-2021-27097-2.patch b/poky/meta/recipes-bsp/u-boot/files/CVE-2021-27097-2.patch
deleted file mode 100644
index b13c44e..0000000
--- a/poky/meta/recipes-bsp/u-boot/files/CVE-2021-27097-2.patch
+++ /dev/null
@@ -1,419 +0,0 @@
-From c5819701a3de61e2ba2ef7ad0b616565b32305e5 Mon Sep 17 00:00:00 2001
-From: Simon Glass <sjg@chromium.org>
-Date: Mon, 15 Feb 2021 17:08:09 -0700
-Subject: [PATCH] image: Adjust the workings of fit_check_format()
-
-At present this function does not accept a size for the FIT. This means
-that it must be read from the FIT itself, introducing potential security
-risk. Update the function to include a size parameter, which can be
-invalid, in which case fit_check_format() calculates it.
-
-For now no callers pass the size, but this can be updated later.
-
-Also adjust the return value to an error code so that all the different
-types of problems can be distinguished by the user.
-
-Signed-off-by: Simon Glass <sjg@chromium.org>
-Reported-by: Bruce Monroe <bruce.monroe@intel.com>
-Reported-by: Arie Haenel <arie.haenel@intel.com>
-Reported-by: Julien Lenoir <julien.lenoir@intel.com>
-
-CVE: CVE-2021-27097 CVE-2021-27138
-Upstream-Status: Backport[https://github.com/u-boot/u-boot/commit/c5819701a3de61e2ba2ef7ad0b616565b32305e5]
-Signed-off-by: Scott Murray <scott.murray@konsulko.com>
-
----
- arch/arm/cpu/armv8/sec_firmware.c | 2 +-
- cmd/bootm.c | 6 ++---
- cmd/disk.c | 2 +-
- cmd/fpga.c | 2 +-
- cmd/nand.c | 2 +-
- cmd/source.c | 2 +-
- cmd/ximg.c | 2 +-
- common/image-fdt.c | 2 +-
- common/image-fit.c | 46 +++++++++++++++++---------------------
- common/splash_source.c | 6 ++---
- common/update.c | 4 ++--
- drivers/fpga/socfpga_arria10.c | 6 ++---
- drivers/net/fsl-mc/mc.c | 2 +-
- drivers/net/pfe_eth/pfe_firmware.c | 2 +-
- include/image.h | 21 ++++++++++++++++-
- tools/fit_common.c | 3 ++-
- tools/fit_image.c | 2 +-
- tools/mkimage.h | 2 ++
- 18 files changed, 65 insertions(+), 49 deletions(-)
-
-diff --git a/arch/arm/cpu/armv8/sec_firmware.c b/arch/arm/cpu/armv8/sec_firmware.c
-index bfc0fac3ef..0561f5efd1 100644
---- a/arch/arm/cpu/armv8/sec_firmware.c
-+++ b/arch/arm/cpu/armv8/sec_firmware.c
-@@ -316,7 +316,7 @@ __weak bool sec_firmware_is_valid(const void *sec_firmware_img)
- return false;
- }
-
-- if (!fit_check_format(sec_firmware_img)) {
-+ if (fit_check_format(sec_firmware_img, IMAGE_SIZE_INVAL)) {
- printf("SEC Firmware: Bad firmware image (bad FIT header)\n");
- return false;
- }
-diff --git a/cmd/bootm.c b/cmd/bootm.c
-index e6b0e04413..a0f823f968 100644
---- a/cmd/bootm.c
-+++ b/cmd/bootm.c
-@@ -291,7 +291,7 @@ static int image_info(ulong addr)
- case IMAGE_FORMAT_FIT:
- puts(" FIT image found\n");
-
-- if (!fit_check_format(hdr)) {
-+ if (fit_check_format(hdr, IMAGE_SIZE_INVAL)) {
- puts("Bad FIT image format!\n");
- unmap_sysmem(hdr);
- return 1;
-@@ -368,7 +368,7 @@ static int do_imls_nor(void)
- #endif
- #if defined(CONFIG_FIT)
- case IMAGE_FORMAT_FIT:
-- if (!fit_check_format(hdr))
-+ if (fit_check_format(hdr, IMAGE_SIZE_INVAL))
- goto next_sector;
-
- printf("FIT Image at %08lX:\n", (ulong)hdr);
-@@ -448,7 +448,7 @@ static int nand_imls_fitimage(struct mtd_info *mtd, int nand_dev, loff_t off,
- return ret;
- }
-
-- if (!fit_check_format(imgdata)) {
-+ if (fit_check_format(imgdata, IMAGE_SIZE_INVAL)) {
- free(imgdata);
- return 0;
- }
-diff --git a/cmd/disk.c b/cmd/disk.c
-index 8060e753eb..3195db9127 100644
---- a/cmd/disk.c
-+++ b/cmd/disk.c
-@@ -114,7 +114,7 @@ int common_diskboot(struct cmd_tbl *cmdtp, const char *intf, int argc,
- /* This cannot be done earlier,
- * we need complete FIT image in RAM first */
- if (genimg_get_format((void *) addr) == IMAGE_FORMAT_FIT) {
-- if (!fit_check_format(fit_hdr)) {
-+ if (fit_check_format(fit_hdr, IMAGE_SIZE_INVAL)) {
- bootstage_error(BOOTSTAGE_ID_IDE_FIT_READ);
- puts("** Bad FIT image format\n");
- return 1;
-diff --git a/cmd/fpga.c b/cmd/fpga.c
-index 8ae1c936fb..51410a8e42 100644
---- a/cmd/fpga.c
-+++ b/cmd/fpga.c
-@@ -330,7 +330,7 @@ static int do_fpga_loadmk(struct cmd_tbl *cmdtp, int flag, int argc,
- return CMD_RET_FAILURE;
- }
-
-- if (!fit_check_format(fit_hdr)) {
-+ if (fit_check_format(fit_hdr, IMAGE_SIZE_INVAL)) {
- puts("Bad FIT image format\n");
- return CMD_RET_FAILURE;
- }
-diff --git a/cmd/nand.c b/cmd/nand.c
-index 92d039af8f..97e117a979 100644
---- a/cmd/nand.c
-+++ b/cmd/nand.c
-@@ -917,7 +917,7 @@ static int nand_load_image(struct cmd_tbl *cmdtp, struct mtd_info *mtd,
- #if defined(CONFIG_FIT)
- /* This cannot be done earlier, we need complete FIT image in RAM first */
- if (genimg_get_format ((void *)addr) == IMAGE_FORMAT_FIT) {
-- if (!fit_check_format (fit_hdr)) {
-+ if (fit_check_format(fit_hdr, IMAGE_SIZE_INVAL)) {
- bootstage_error(BOOTSTAGE_ID_NAND_FIT_READ);
- puts ("** Bad FIT image format\n");
- return 1;
-diff --git a/cmd/source.c b/cmd/source.c
-index b6c709a3d2..71f71528ad 100644
---- a/cmd/source.c
-+++ b/cmd/source.c
-@@ -107,7 +107,7 @@ int image_source_script(ulong addr, const char *fit_uname)
- #if defined(CONFIG_FIT)
- case IMAGE_FORMAT_FIT:
- fit_hdr = buf;
-- if (!fit_check_format (fit_hdr)) {
-+ if (fit_check_format(fit_hdr, IMAGE_SIZE_INVAL)) {
- puts ("Bad FIT image format\n");
- return 1;
- }
-diff --git a/cmd/ximg.c b/cmd/ximg.c
-index 159ba51648..ef738ebfa2 100644
---- a/cmd/ximg.c
-+++ b/cmd/ximg.c
-@@ -136,7 +136,7 @@ do_imgextract(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
- "at %08lx ...\n", uname, addr);
-
- fit_hdr = (const void *)addr;
-- if (!fit_check_format(fit_hdr)) {
-+ if (fit_check_format(fit_hdr, IMAGE_SIZE_INVAL)) {
- puts("Bad FIT image format\n");
- return 1;
- }
-diff --git a/common/image-fdt.c b/common/image-fdt.c
-index 327a8c4c39..4105259212 100644
---- a/common/image-fdt.c
-+++ b/common/image-fdt.c
-@@ -399,7 +399,7 @@ int boot_get_fdt(int flag, int argc, char *const argv[], uint8_t arch,
- */
- #if CONFIG_IS_ENABLED(FIT)
- /* check FDT blob vs FIT blob */
-- if (fit_check_format(buf)) {
-+ if (!fit_check_format(buf, IMAGE_SIZE_INVAL)) {
- ulong load, len;
-
- fdt_noffset = boot_get_fdt_fit(images,
-diff --git a/common/image-fit.c b/common/image-fit.c
-index 9637d747fb..402f08fc9d 100644
---- a/common/image-fit.c
-+++ b/common/image-fit.c
-@@ -8,6 +8,8 @@
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- */
-
-+#define LOG_CATEGORY LOGC_BOOT
-+
- #ifdef USE_HOSTCC
- #include "mkimage.h"
- #include <time.h>
-@@ -1550,49 +1552,41 @@ int fit_image_check_comp(const void *fit, int noffset, uint8_t comp)
- return (comp == image_comp);
- }
-
--/**
-- * fit_check_format - sanity check FIT image format
-- * @fit: pointer to the FIT format image header
-- *
-- * fit_check_format() runs a basic sanity FIT image verification.
-- * Routine checks for mandatory properties, nodes, etc.
-- *
-- * returns:
-- * 1, on success
-- * 0, on failure
-- */
--int fit_check_format(const void *fit)
-+int fit_check_format(const void *fit, ulong size)
- {
-+ int ret;
-+
- /* A FIT image must be a valid FDT */
-- if (fdt_check_header(fit)) {
-- debug("Wrong FIT format: not a flattened device tree\n");
-- return 0;
-+ ret = fdt_check_header(fit);
-+ if (ret) {
-+ log_debug("Wrong FIT format: not a flattened device tree (err=%d)\n",
-+ ret);
-+ return -ENOEXEC;
- }
-
- /* mandatory / node 'description' property */
-- if (fdt_getprop(fit, 0, FIT_DESC_PROP, NULL) == NULL) {
-- debug("Wrong FIT format: no description\n");
-- return 0;
-+ if (!fdt_getprop(fit, 0, FIT_DESC_PROP, NULL)) {
-+ log_debug("Wrong FIT format: no description\n");
-+ return -ENOMSG;
- }
-
- if (IMAGE_ENABLE_TIMESTAMP) {
- /* mandatory / node 'timestamp' property */
-- if (fdt_getprop(fit, 0, FIT_TIMESTAMP_PROP, NULL) == NULL) {
-- debug("Wrong FIT format: no timestamp\n");
-- return 0;
-+ if (!fdt_getprop(fit, 0, FIT_TIMESTAMP_PROP, NULL)) {
-+ log_debug("Wrong FIT format: no timestamp\n");
-+ return -ENODATA;
- }
- }
-
- /* mandatory subimages parent '/images' node */
- if (fdt_path_offset(fit, FIT_IMAGES_PATH) < 0) {
-- debug("Wrong FIT format: no images parent node\n");
-- return 0;
-+ log_debug("Wrong FIT format: no images parent node\n");
-+ return -ENOENT;
- }
-
-- return 1;
-+ return 0;
- }
-
--
- /**
- * fit_conf_find_compat
- * @fit: pointer to the FIT format image header
-@@ -1929,7 +1923,7 @@ int fit_image_load(bootm_headers_t *images, ulong addr,
- printf("## Loading %s from FIT Image at %08lx ...\n", prop_name, addr);
-
- bootstage_mark(bootstage_id + BOOTSTAGE_SUB_FORMAT);
-- if (!fit_check_format(fit)) {
-+ if (fit_check_format(fit, IMAGE_SIZE_INVAL)) {
- printf("Bad FIT %s image format!\n", prop_name);
- bootstage_error(bootstage_id + BOOTSTAGE_SUB_FORMAT);
- return -ENOEXEC;
-diff --git a/common/splash_source.c b/common/splash_source.c
-index f51ca5ddf3..bad9a7790a 100644
---- a/common/splash_source.c
-+++ b/common/splash_source.c
-@@ -336,10 +336,10 @@ static int splash_load_fit(struct splash_location *location, u32 bmp_load_addr)
- if (res < 0)
- return res;
-
-- res = fit_check_format(fit_header);
-- if (!res) {
-+ res = fit_check_format(fit_header, IMAGE_SIZE_INVAL);
-+ if (res) {
- debug("Could not find valid FIT image\n");
-- return -EINVAL;
-+ return res;
- }
-
- /* Get the splash image node */
-diff --git a/common/update.c b/common/update.c
-index a5879cb52c..f0848954e5 100644
---- a/common/update.c
-+++ b/common/update.c
-@@ -286,7 +286,7 @@ int update_tftp(ulong addr, char *interface, char *devstring)
- got_update_file:
- fit = map_sysmem(addr, 0);
-
-- if (!fit_check_format((void *)fit)) {
-+ if (fit_check_format((void *)fit, IMAGE_SIZE_INVAL)) {
- printf("Bad FIT format of the update file, aborting "
- "auto-update\n");
- return 1;
-@@ -363,7 +363,7 @@ int fit_update(const void *fit)
- if (!fit)
- return -EINVAL;
-
-- if (!fit_check_format((void *)fit)) {
-+ if (fit_check_format((void *)fit, IMAGE_SIZE_INVAL)) {
- printf("Bad FIT format of the update file, aborting auto-update\n");
- return -EINVAL;
- }
-diff --git a/drivers/fpga/socfpga_arria10.c b/drivers/fpga/socfpga_arria10.c
-index 44e1ac54c3..18f99676d2 100644
---- a/drivers/fpga/socfpga_arria10.c
-+++ b/drivers/fpga/socfpga_arria10.c
-@@ -565,10 +565,10 @@ static int first_loading_rbf_to_buffer(struct udevice *dev,
- if (ret < 0)
- return ret;
-
-- ret = fit_check_format(buffer_p);
-- if (!ret) {
-+ ret = fit_check_format(buffer_p, IMAGE_SIZE_INVAL);
-+ if (ret) {
- debug("FPGA: No valid FIT image was found.\n");
-- return -EBADF;
-+ return ret;
- }
-
- confs_noffset = fdt_path_offset(buffer_p, FIT_CONFS_PATH);
-diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c
-index 84db6be624..81265ee356 100644
---- a/drivers/net/fsl-mc/mc.c
-+++ b/drivers/net/fsl-mc/mc.c
-@@ -141,7 +141,7 @@ int parse_mc_firmware_fit_image(u64 mc_fw_addr,
- return -EINVAL;
- }
-
-- if (!fit_check_format(fit_hdr)) {
-+ if (fit_check_format(fit_hdr, IMAGE_SIZE_INVAL)) {
- printf("fsl-mc: ERR: Bad firmware image (bad FIT header)\n");
- return -EINVAL;
- }
-diff --git a/drivers/net/pfe_eth/pfe_firmware.c b/drivers/net/pfe_eth/pfe_firmware.c
-index 41999e176d..eee70a2e73 100644
---- a/drivers/net/pfe_eth/pfe_firmware.c
-+++ b/drivers/net/pfe_eth/pfe_firmware.c
-@@ -160,7 +160,7 @@ static int pfe_fit_check(void)
- return ret;
- }
-
-- if (!fit_check_format(pfe_fit_addr)) {
-+ if (fit_check_format(pfe_fit_addr, IMAGE_SIZE_INVAL)) {
- printf("PFE Firmware: Bad firmware image (bad FIT header)\n");
- ret = -1;
- return ret;
-diff --git a/include/image.h b/include/image.h
-index 41473dbb9c..8c152c5c5f 100644
---- a/include/image.h
-+++ b/include/image.h
-@@ -134,6 +134,9 @@ extern ulong image_load_addr; /* Default Load Address */
- extern ulong image_save_addr; /* Default Save Address */
- extern ulong image_save_size; /* Default Save Size */
-
-+/* An invalid size, meaning that the image size is not known */
-+#define IMAGE_SIZE_INVAL (-1UL)
-+
- enum ih_category {
- IH_ARCH,
- IH_COMP,
-@@ -1141,7 +1144,23 @@ int fit_image_check_os(const void *fit, int noffset, uint8_t os);
- int fit_image_check_arch(const void *fit, int noffset, uint8_t arch);
- int fit_image_check_type(const void *fit, int noffset, uint8_t type);
- int fit_image_check_comp(const void *fit, int noffset, uint8_t comp);
--int fit_check_format(const void *fit);
-+
-+/**
-+ * fit_check_format() - Check that the FIT is valid
-+ *
-+ * This performs various checks on the FIT to make sure it is suitable for
-+ * use, looking for mandatory properties, nodes, etc.
-+ *
-+ * If FIT_FULL_CHECK is enabled, it also runs it through libfdt to make
-+ * sure that there are no strange tags or broken nodes in the FIT.
-+ *
-+ * @fit: pointer to the FIT format image header
-+ * @return 0 if OK, -ENOEXEC if not an FDT file, -EINVAL if the full FDT check
-+ * failed (e.g. due to bad structure), -ENOMSG if the description is
-+ * missing, -ENODATA if the timestamp is missing, -ENOENT if the /images
-+ * path is missing
-+ */
-+int fit_check_format(const void *fit, ulong size);
-
- int fit_conf_find_compat(const void *fit, const void *fdt);
-
-diff --git a/tools/fit_common.c b/tools/fit_common.c
-index cdf987d3c1..52b63296f8 100644
---- a/tools/fit_common.c
-+++ b/tools/fit_common.c
-@@ -26,7 +26,8 @@
- int fit_verify_header(unsigned char *ptr, int image_size,
- struct image_tool_params *params)
- {
-- if (fdt_check_header(ptr) != EXIT_SUCCESS || !fit_check_format(ptr))
-+ if (fdt_check_header(ptr) != EXIT_SUCCESS ||
-+ fit_check_format(ptr, IMAGE_SIZE_INVAL))
- return EXIT_FAILURE;
-
- return EXIT_SUCCESS;
-diff --git a/tools/fit_image.c b/tools/fit_image.c
-index 06faeda7c2..d440d143c6 100644
---- a/tools/fit_image.c
-+++ b/tools/fit_image.c
-@@ -883,7 +883,7 @@ static int fit_extract_contents(void *ptr, struct image_tool_params *params)
- /* Indent string is defined in header image.h */
- p = IMAGE_INDENT_STRING;
-
-- if (!fit_check_format(fit)) {
-+ if (fit_check_format(fit, IMAGE_SIZE_INVAL)) {
- printf("Bad FIT image format\n");
- return -1;
- }
-diff --git a/tools/mkimage.h b/tools/mkimage.h
-index 5b096a545b..0d3148444c 100644
---- a/tools/mkimage.h
-+++ b/tools/mkimage.h
-@@ -29,6 +29,8 @@
- #define debug(fmt,args...)
- #endif /* MKIMAGE_DEBUG */
-
-+#define log_debug(fmt, args...) debug(fmt, ##args)
-+
- static inline void *map_sysmem(ulong paddr, unsigned long len)
- {
- return (void *)(uintptr_t)paddr;
diff --git a/poky/meta/recipes-bsp/u-boot/files/CVE-2021-27097-3.patch b/poky/meta/recipes-bsp/u-boot/files/CVE-2021-27097-3.patch
deleted file mode 100644
index 86f7e8c..0000000
--- a/poky/meta/recipes-bsp/u-boot/files/CVE-2021-27097-3.patch
+++ /dev/null
@@ -1,105 +0,0 @@
-From 6f3c2d8aa5e6cbd80b5e869bbbddecb66c329d01 Mon Sep 17 00:00:00 2001
-From: Simon Glass <sjg@chromium.org>
-Date: Mon, 15 Feb 2021 17:08:10 -0700
-Subject: [PATCH] image: Add an option to do a full check of the FIT
-
-Some strange modifications of the FIT can introduce security risks. Add an
-option to check it thoroughly, using libfdt's fdt_check_full() function.
-
-Enable this by default if signature verification is enabled.
-
-CVE-2021-27097
-
-Signed-off-by: Simon Glass <sjg@chromium.org>
-Reported-by: Bruce Monroe <bruce.monroe@intel.com>
-Reported-by: Arie Haenel <arie.haenel@intel.com>
-Reported-by: Julien Lenoir <julien.lenoir@intel.com>
-
-CVE: CVE-2021-27097
-Upstream-Status: Backport[https://github.com/u-boot/u-boot/commit/6f3c2d8aa5e6cbd80b5e869bbbddecb66c329d01]
-Signed-off-by: Scott Murray <scott.murray@konsulko.com>
-
----
- common/Kconfig.boot | 20 ++++++++++++++++++++
- common/image-fit.c | 16 ++++++++++++++++
- 2 files changed, 36 insertions(+)
-
-diff --git a/common/Kconfig.boot b/common/Kconfig.boot
-index 5eaabdfc27..7532e55edb 100644
---- a/common/Kconfig.boot
-+++ b/common/Kconfig.boot
-@@ -63,6 +63,15 @@ config FIT_ENABLE_SHA512_SUPPORT
- SHA512 checksum is a 512-bit (64-byte) hash value used to check that
- the image contents have not been corrupted.
-
-+config FIT_FULL_CHECK
-+ bool "Do a full check of the FIT before using it"
-+ default y
-+ help
-+ Enable this do a full check of the FIT to make sure it is valid. This
-+ helps to protect against carefully crafted FITs which take advantage
-+ of bugs or omissions in the code. This includes a bad structure,
-+ multiple root nodes and the like.
-+
- config FIT_SIGNATURE
- bool "Enable signature verification of FIT uImages"
- depends on DM
-@@ -70,6 +79,7 @@ config FIT_SIGNATURE
- select RSA
- select RSA_VERIFY
- select IMAGE_SIGN_INFO
-+ select FIT_FULL_CHECK
- help
- This option enables signature verification of FIT uImages,
- using a hash signed and verified using RSA. If
-@@ -159,6 +169,15 @@ config SPL_FIT_PRINT
- help
- Support printing the content of the fitImage in a verbose manner in SPL.
-
-+config SPL_FIT_FULL_CHECK
-+ bool "Do a full check of the FIT before using it"
-+ help
-+ Enable this do a full check of the FIT to make sure it is valid. This
-+ helps to protect against carefully crafted FITs which take advantage
-+ of bugs or omissions in the code. This includes a bad structure,
-+ multiple root nodes and the like.
-+
-+
- config SPL_FIT_SIGNATURE
- bool "Enable signature verification of FIT firmware within SPL"
- depends on SPL_DM
-@@ -168,6 +187,7 @@ config SPL_FIT_SIGNATURE
- select SPL_RSA
- select SPL_RSA_VERIFY
- select SPL_IMAGE_SIGN_INFO
-+ select SPL_FIT_FULL_CHECK
-
- config SPL_LOAD_FIT
- bool "Enable SPL loading U-Boot as a FIT (basic fitImage features)"
-diff --git a/common/image-fit.c b/common/image-fit.c
-index f6c0428a96..bcf395f6a1 100644
---- a/common/image-fit.c
-+++ b/common/image-fit.c
-@@ -1580,6 +1580,22 @@ int fit_check_format(const void *fit, ulong size)
- return -ENOEXEC;
- }
-
-+ if (CONFIG_IS_ENABLED(FIT_FULL_CHECK)) {
-+ /*
-+ * If we are not given the size, make do wtih calculating it.
-+ * This is not as secure, so we should consider a flag to
-+ * control this.
-+ */
-+ if (size == IMAGE_SIZE_INVAL)
-+ size = fdt_totalsize(fit);
-+ ret = fdt_check_full(fit, size);
-+
-+ if (ret) {
-+ log_debug("FIT check error %d\n", ret);
-+ return -EINVAL;
-+ }
-+ }
-+
- /* mandatory / node 'description' property */
- if (!fdt_getprop(fit, 0, FIT_DESC_PROP, NULL)) {
- log_debug("Wrong FIT format: no description\n");
diff --git a/poky/meta/recipes-bsp/u-boot/files/CVE-2021-27097-4.patch b/poky/meta/recipes-bsp/u-boot/files/CVE-2021-27097-4.patch
deleted file mode 100644
index 060cac1..0000000
--- a/poky/meta/recipes-bsp/u-boot/files/CVE-2021-27097-4.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From 124c255731c76a2b09587378b2bcce561bcd3f2d Mon Sep 17 00:00:00 2001
-From: Simon Glass <sjg@chromium.org>
-Date: Mon, 15 Feb 2021 17:08:11 -0700
-Subject: [PATCH] libfdt: Check for multiple/invalid root nodes
-
-It is possible to construct a devicetree blob with multiple root nodes.
-Update fdt_check_full() to check for this, along with a root node with an
-invalid name.
-
-CVE-2021-27097
-
-Signed-off-by: Simon Glass <sjg@chromium.org>
-Reported-by: Bruce Monroe <bruce.monroe@intel.com>
-Reported-by: Arie Haenel <arie.haenel@intel.com>
-Reported-by: Julien Lenoir <julien.lenoir@intel.com>
-
-CVE: CVE-2021-27097
-Upstream-Status: Backport[https://github.com/u-boot/u-boot/commit/124c255731c76a2b09587378b2bcce561bcd3f2d]
-Signed-off-by: Scott Murray <scott.murray@konsulko.com>
-
----
- scripts/dtc/libfdt/fdt_ro.c | 17 +++++++++++++++++
- test/py/tests/test_vboot.py | 3 ++-
- 2 files changed, 19 insertions(+), 1 deletion(-)
-
-diff --git a/scripts/dtc/libfdt/fdt_ro.c b/scripts/dtc/libfdt/fdt_ro.c
-index d984bab036..efe7efe921 100644
---- a/scripts/dtc/libfdt/fdt_ro.c
-+++ b/scripts/dtc/libfdt/fdt_ro.c
-@@ -867,6 +867,7 @@ int fdt_check_full(const void *fdt, size_t bufsize)
- unsigned depth = 0;
- const void *prop;
- const char *propname;
-+ bool expect_end = false;
-
- if (bufsize < FDT_V1_SIZE)
- return -FDT_ERR_TRUNCATED;
-@@ -887,6 +888,10 @@ int fdt_check_full(const void *fdt, size_t bufsize)
- if (nextoffset < 0)
- return nextoffset;
-
-+ /* If we see two root nodes, something is wrong */
-+ if (expect_end && tag != FDT_END)
-+ return -FDT_ERR_BADLAYOUT;
-+
- switch (tag) {
- case FDT_NOP:
- break;
-@@ -900,12 +905,24 @@ int fdt_check_full(const void *fdt, size_t bufsize)
- depth++;
- if (depth > INT_MAX)
- return -FDT_ERR_BADSTRUCTURE;
-+
-+ /* The root node must have an empty name */
-+ if (depth == 1) {
-+ const char *name;
-+ int len;
-+
-+ name = fdt_get_name(fdt, offset, &len);
-+ if (*name || len)
-+ return -FDT_ERR_BADLAYOUT;
-+ }
- break;
-
- case FDT_END_NODE:
- if (depth == 0)
- return -FDT_ERR_BADSTRUCTURE;
- depth--;
-+ if (depth == 0)
-+ expect_end = true;
- break;
-
- case FDT_PROP:
diff --git a/poky/meta/recipes-bsp/u-boot/files/CVE-2021-27138-1.patch b/poky/meta/recipes-bsp/u-boot/files/CVE-2021-27138-1.patch
deleted file mode 100644
index 562f815..0000000
--- a/poky/meta/recipes-bsp/u-boot/files/CVE-2021-27138-1.patch
+++ /dev/null
@@ -1,245 +0,0 @@
-From 79af75f7776fc20b0d7eb6afe1e27c00fdb4b9b4 Mon Sep 17 00:00:00 2001
-From: Simon Glass <sjg@chromium.org>
-Date: Mon, 15 Feb 2021 17:08:06 -0700
-Subject: [PATCH] fit: Don't allow verification of images with @ nodes
-
-When searching for a node called 'fred', any unit address appended to the
-name is ignored by libfdt, meaning that 'fred' can match 'fred@1'. This
-means that we cannot be sure that the node originally intended is the one
-that is used.
-
-Disallow use of nodes with unit addresses.
-
-Update the forge test also, since it uses @ addresses.
-
-CVE-2021-27138
-
-Signed-off-by: Simon Glass <sjg@chromium.org>
-Reported-by: Bruce Monroe <bruce.monroe@intel.com>
-Reported-by: Arie Haenel <arie.haenel@intel.com>
-Reported-by: Julien Lenoir <julien.lenoir@intel.com>
-
-CVE: CVE-2021-27138
-Upstream-Status: Backport[https://github.com/u-boot/u-boot/commit/79af75f7776fc20b0d7eb6afe1e27c00fdb4b9b4]
-Signed-off-by: Scott Murray <scott.murray@konsulko.com>
-
----
- common/image-fit-sig.c | 22 ++++++++++++++++++++--
- common/image-fit.c | 20 +++++++++++++++-----
- test/py/tests/test_fit.py | 24 ++++++++++++------------
- test/py/tests/vboot_forge.py | 12 ++++++------
- 4 files changed, 53 insertions(+), 25 deletions(-)
-
-diff --git a/common/image-fit-sig.c b/common/image-fit-sig.c
-index 897e04c7a3..34ebb8edfe 100644
---- a/common/image-fit-sig.c
-+++ b/common/image-fit-sig.c
-@@ -149,6 +149,14 @@ static int fit_image_verify_sig(const void *fit, int image_noffset,
- fdt_for_each_subnode(noffset, fit, image_noffset) {
- const char *name = fit_get_name(fit, noffset, NULL);
-
-+ /*
-+ * We don't support this since libfdt considers names with the
-+ * name root but different @ suffix to be equal
-+ */
-+ if (strchr(name, '@')) {
-+ err_msg = "Node name contains @";
-+ goto error;
-+ }
- if (!strncmp(name, FIT_SIG_NODENAME,
- strlen(FIT_SIG_NODENAME))) {
- ret = fit_image_check_sig(fit, noffset, data,
-@@ -398,9 +406,10 @@ error:
- return -EPERM;
- }
-
--int fit_config_verify_required_sigs(const void *fit, int conf_noffset,
-- const void *sig_blob)
-+static int fit_config_verify_required_sigs(const void *fit, int conf_noffset,
-+ const void *sig_blob)
- {
-+ const char *name = fit_get_name(fit, conf_noffset, NULL);
- int noffset;
- int sig_node;
- int verified = 0;
-@@ -408,6 +417,15 @@ int fit_config_verify_required_sigs(const void *fit, int conf_noffset,
- bool reqd_policy_all = true;
- const char *reqd_mode;
-
-+ /*
-+ * We don't support this since libfdt considers names with the
-+ * name root but different @ suffix to be equal
-+ */
-+ if (strchr(name, '@')) {
-+ printf("Configuration node '%s' contains '@'\n", name);
-+ return -EPERM;
-+ }
-+
- /* Work out what we need to verify */
- sig_node = fdt_subnode_offset(sig_blob, 0, FIT_SIG_NODENAME);
- if (sig_node < 0) {
-diff --git a/common/image-fit.c b/common/image-fit.c
-index adc3e551de..c3dc814115 100644
---- a/common/image-fit.c
-+++ b/common/image-fit.c
-@@ -1369,21 +1369,31 @@ error:
- */
- int fit_image_verify(const void *fit, int image_noffset)
- {
-+ const char *name = fit_get_name(fit, image_noffset, NULL);
- const void *data;
- size_t size;
-- int noffset = 0;
- char *err_msg = "";
-
-+ if (strchr(name, '@')) {
-+ /*
-+ * We don't support this since libfdt considers names with the
-+ * name root but different @ suffix to be equal
-+ */
-+ err_msg = "Node name contains @";
-+ goto err;
-+ }
- /* Get image data and data length */
- if (fit_image_get_data_and_size(fit, image_noffset, &data, &size)) {
- err_msg = "Can't get image data/size";
-- printf("error!\n%s for '%s' hash node in '%s' image node\n",
-- err_msg, fit_get_name(fit, noffset, NULL),
-- fit_get_name(fit, image_noffset, NULL));
-- return 0;
-+ goto err;
- }
-
- return fit_image_verify_with_data(fit, image_noffset, data, size);
-+
-+err:
-+ printf("error!\n%s in '%s' image node\n", err_msg,
-+ fit_get_name(fit, image_noffset, NULL));
-+ return 0;
- }
-
- /**
-diff --git a/test/py/tests/test_fit.py b/test/py/tests/test_fit.py
-index 84b3f95850..6d5b43c3ba 100755
---- a/test/py/tests/test_fit.py
-+++ b/test/py/tests/test_fit.py
-@@ -17,7 +17,7 @@ base_its = '''
- #address-cells = <1>;
-
- images {
-- kernel@1 {
-+ kernel-1 {
- data = /incbin/("%(kernel)s");
- type = "kernel";
- arch = "sandbox";
-@@ -26,7 +26,7 @@ base_its = '''
- load = <0x40000>;
- entry = <0x8>;
- };
-- kernel@2 {
-+ kernel-2 {
- data = /incbin/("%(loadables1)s");
- type = "kernel";
- arch = "sandbox";
-@@ -35,19 +35,19 @@ base_its = '''
- %(loadables1_load)s
- entry = <0x0>;
- };
-- fdt@1 {
-+ fdt-1 {
- description = "snow";
- data = /incbin/("%(fdt)s");
- type = "flat_dt";
- arch = "sandbox";
- %(fdt_load)s
- compression = "%(compression)s";
-- signature@1 {
-+ signature-1 {
- algo = "sha1,rsa2048";
- key-name-hint = "dev";
- };
- };
-- ramdisk@1 {
-+ ramdisk-1 {
- description = "snow";
- data = /incbin/("%(ramdisk)s");
- type = "ramdisk";
-@@ -56,7 +56,7 @@ base_its = '''
- %(ramdisk_load)s
- compression = "%(compression)s";
- };
-- ramdisk@2 {
-+ ramdisk-2 {
- description = "snow";
- data = /incbin/("%(loadables2)s");
- type = "ramdisk";
-@@ -67,10 +67,10 @@ base_its = '''
- };
- };
- configurations {
-- default = "conf@1";
-- conf@1 {
-- kernel = "kernel@1";
-- fdt = "fdt@1";
-+ default = "conf-1";
-+ conf-1 {
-+ kernel = "kernel-1";
-+ fdt = "fdt-1";
- %(ramdisk_config)s
- %(loadables_config)s
- };
-@@ -410,7 +410,7 @@ def test_fit(u_boot_console):
-
- # Try a ramdisk
- with cons.log.section('Kernel + FDT + Ramdisk load'):
-- params['ramdisk_config'] = 'ramdisk = "ramdisk@1";'
-+ params['ramdisk_config'] = 'ramdisk = "ramdisk-1";'
- params['ramdisk_load'] = 'load = <%#x>;' % params['ramdisk_addr']
- fit = make_fit(mkimage, params)
- cons.restart_uboot()
-@@ -419,7 +419,7 @@ def test_fit(u_boot_console):
-
- # Configuration with some Loadables
- with cons.log.section('Kernel + FDT + Ramdisk load + Loadables'):
-- params['loadables_config'] = 'loadables = "kernel@2", "ramdisk@2";'
-+ params['loadables_config'] = 'loadables = "kernel-2", "ramdisk-2";'
- params['loadables1_load'] = ('load = <%#x>;' %
- params['loadables1_addr'])
- params['loadables2_load'] = ('load = <%#x>;' %
-diff --git a/test/py/tests/vboot_forge.py b/test/py/tests/vboot_forge.py
-index 0fb7ef4024..b41105bd0e 100644
---- a/test/py/tests/vboot_forge.py
-+++ b/test/py/tests/vboot_forge.py
-@@ -376,12 +376,12 @@ def manipulate(root, strblock):
- """
- Maliciously manipulates the structure to create a crafted FIT file
- """
-- # locate /images/kernel@1 (frankly, it just expects it to be the first one)
-+ # locate /images/kernel-1 (frankly, it just expects it to be the first one)
- kernel_node = root[0][0]
- # clone it to save time filling all the properties
- fake_kernel = kernel_node.clone()
- # rename the node
-- fake_kernel.name = b'kernel@2'
-+ fake_kernel.name = b'kernel-2'
- # get rid of signatures/hashes
- fake_kernel.children = []
- # NOTE: this simply replaces the first prop... either description or data
-@@ -391,13 +391,13 @@ def manipulate(root, strblock):
- root[0].children.append(fake_kernel)
-
- # modify the default configuration
-- root[1].props[0].value = b'conf@2\x00'
-+ root[1].props[0].value = b'conf-2\x00'
- # clone the first (only?) configuration
- fake_conf = root[1][0].clone()
- # rename and change kernel and fdt properties to select the crafted kernel
-- fake_conf.name = b'conf@2'
-- fake_conf.props[0].value = b'kernel@2\x00'
-- fake_conf.props[1].value = b'fdt@1\x00'
-+ fake_conf.name = b'conf-2'
-+ fake_conf.props[0].value = b'kernel-2\x00'
-+ fake_conf.props[1].value = b'fdt-1\x00'
- # insert the new configuration under /configurations
- root[1].children.append(fake_conf)
-
diff --git a/poky/meta/recipes-bsp/u-boot/files/CVE-2021-27138-2.patch b/poky/meta/recipes-bsp/u-boot/files/CVE-2021-27138-2.patch
deleted file mode 100644
index 946196c..0000000
--- a/poky/meta/recipes-bsp/u-boot/files/CVE-2021-27138-2.patch
+++ /dev/null
@@ -1,109 +0,0 @@
-From 3f04db891a353f4b127ed57279279f851c6b4917 Mon Sep 17 00:00:00 2001
-From: Simon Glass <sjg@chromium.org>
-Date: Mon, 15 Feb 2021 17:08:12 -0700
-Subject: [PATCH] image: Check for unit addresses in FITs
-
-Using unit addresses in a FIT is a security risk. Add a check for this
-and disallow it.
-
-CVE-2021-27138
-
-Signed-off-by: Simon Glass <sjg@chromium.org>
-Reported-by: Bruce Monroe <bruce.monroe@intel.com>
-Reported-by: Arie Haenel <arie.haenel@intel.com>
-Reported-by: Julien Lenoir <julien.lenoir@intel.com>
-
-CVE: CVE-2021-27138
-Upstream-Status: Backport[https://github.com/u-boot/u-boot/commit/3f04db891a353f4b127ed57279279f851c6b4917]
-Signed-off-by: Scott Murray <scott.murray@konsulko.com>
-
----
- common/image-fit.c | 56 +++++++++++++++++++++++++++++++++++++++++----
- test/py/tests/test_vboot.py | 9 ++++----
- 2 files changed, 57 insertions(+), 8 deletions(-)
-
-diff --git a/common/image-fit.c b/common/image-fit.c
-index bcf395f6a1..28b3d2b191 100644
---- a/common/image-fit.c
-+++ b/common/image-fit.c
-@@ -1568,6 +1568,34 @@ int fit_image_check_comp(const void *fit, int noffset, uint8_t comp)
- return (comp == image_comp);
- }
-
-+/**
-+ * fdt_check_no_at() - Check for nodes whose names contain '@'
-+ *
-+ * This checks the parent node and all subnodes recursively
-+ *
-+ * @fit: FIT to check
-+ * @parent: Parent node to check
-+ * @return 0 if OK, -EADDRNOTAVAIL is a node has a name containing '@'
-+ */
-+static int fdt_check_no_at(const void *fit, int parent)
-+{
-+ const char *name;
-+ int node;
-+ int ret;
-+
-+ name = fdt_get_name(fit, parent, NULL);
-+ if (!name || strchr(name, '@'))
-+ return -EADDRNOTAVAIL;
-+
-+ fdt_for_each_subnode(node, fit, parent) {
-+ ret = fdt_check_no_at(fit, node);
-+ if (ret)
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
- int fit_check_format(const void *fit, ulong size)
- {
- int ret;
-@@ -1589,10 +1617,27 @@ int fit_check_format(const void *fit, ulong size)
- if (size == IMAGE_SIZE_INVAL)
- size = fdt_totalsize(fit);
- ret = fdt_check_full(fit, size);
-+ if (ret)
-+ ret = -EINVAL;
-+
-+ /*
-+ * U-Boot stopped using unit addressed in 2017. Since libfdt
-+ * can match nodes ignoring any unit address, signature
-+ * verification can see the wrong node if one is inserted with
-+ * the same name as a valid node but with a unit address
-+ * attached. Protect against this by disallowing unit addresses.
-+ */
-+ if (!ret && CONFIG_IS_ENABLED(FIT_SIGNATURE)) {
-+ ret = fdt_check_no_at(fit, 0);
-
-+ if (ret) {
-+ log_debug("FIT check error %d\n", ret);
-+ return ret;
-+ }
-+ }
- if (ret) {
- log_debug("FIT check error %d\n", ret);
-- return -EINVAL;
-+ return ret;
- }
- }
-
-@@ -1955,10 +2000,13 @@ int fit_image_load(bootm_headers_t *images, ulong addr,
- printf("## Loading %s from FIT Image at %08lx ...\n", prop_name, addr);
-
- bootstage_mark(bootstage_id + BOOTSTAGE_SUB_FORMAT);
-- if (fit_check_format(fit, IMAGE_SIZE_INVAL)) {
-- printf("Bad FIT %s image format!\n", prop_name);
-+ ret = fit_check_format(fit, IMAGE_SIZE_INVAL);
-+ if (ret) {
-+ printf("Bad FIT %s image format! (err=%d)\n", prop_name, ret);
-+ if (CONFIG_IS_ENABLED(FIT_SIGNATURE) && ret == -EADDRNOTAVAIL)
-+ printf("Signature checking prevents use of unit addresses (@) in nodes\n");
- bootstage_error(bootstage_id + BOOTSTAGE_SUB_FORMAT);
-- return -ENOEXEC;
-+ return ret;
- }
- bootstage_mark(bootstage_id + BOOTSTAGE_SUB_FORMAT_OK);
- if (fit_uname) {
diff --git a/poky/meta/recipes-bsp/u-boot/u-boot-common.inc b/poky/meta/recipes-bsp/u-boot/u-boot-common.inc
index 993478a..dbbb9ff 100644
--- a/poky/meta/recipes-bsp/u-boot/u-boot-common.inc
+++ b/poky/meta/recipes-bsp/u-boot/u-boot-common.inc
@@ -12,16 +12,9 @@
# We use the revision in order to avoid having to fetch it from the
# repo during parse
-SRCREV = "c4fddedc48f336eabc4ce3f74940e6aa372de18c"
+SRCREV = "b46dd116ce03e235f2a7d4843c6278e1da44b5e1"
SRC_URI = "git://git.denx.de/u-boot.git \
- file://0001-add-valid-fdt-check.patch \
- file://CVE-2021-27097-1.patch \
- file://CVE-2021-27097-2.patch \
- file://CVE-2021-27097-3.patch \
- file://CVE-2021-27097-4.patch \
- file://CVE-2021-27138-1.patch \
- file://CVE-2021-27138-2.patch \
"
S = "${WORKDIR}/git"
diff --git a/poky/meta/recipes-bsp/u-boot/u-boot-tools_2021.01.bb b/poky/meta/recipes-bsp/u-boot/u-boot-tools_2021.04.bb
similarity index 100%
rename from poky/meta/recipes-bsp/u-boot/u-boot-tools_2021.01.bb
rename to poky/meta/recipes-bsp/u-boot/u-boot-tools_2021.04.bb
diff --git a/poky/meta/recipes-bsp/u-boot/u-boot_2021.01.bb b/poky/meta/recipes-bsp/u-boot/u-boot_2021.04.bb
similarity index 100%
rename from poky/meta/recipes-bsp/u-boot/u-boot_2021.01.bb
rename to poky/meta/recipes-bsp/u-boot/u-boot_2021.04.bb
diff --git a/poky/meta/recipes-connectivity/avahi/avahi_0.8.bb b/poky/meta/recipes-connectivity/avahi/avahi_0.8.bb
index c8a3f87..5c46bbf 100644
--- a/poky/meta/recipes-connectivity/avahi/avahi_0.8.bb
+++ b/poky/meta/recipes-connectivity/avahi/avahi_0.8.bb
@@ -30,10 +30,13 @@
SRC_URI[md5sum] = "229c6aa30674fc43c202b22c5f8c2be7"
SRC_URI[sha256sum] = "060309d7a333d38d951bc27598c677af1796934dbd98e1024e7ad8de798fedda"
+# Issue only affects Debian/SUSE, not us
+CVE_CHECK_WHITELIST += "CVE-2021-26720"
+
DEPENDS = "expat libcap libdaemon glib-2.0 intltool-native"
# For gtk related PACKAGECONFIGs: gtk, gtk3
-AVAHI_GTK ?= "gtk3"
+AVAHI_GTK ?= ""
PACKAGECONFIG ??= "dbus ${@bb.utils.contains_any('DISTRO_FEATURES','x11 wayland','${AVAHI_GTK}','',d)}"
PACKAGECONFIG[dbus] = "--enable-dbus,--disable-dbus,dbus"
diff --git a/poky/meta/recipes-connectivity/bind/bind-9.16.12/0001-avoid-start-failure-with-bind-user.patch b/poky/meta/recipes-connectivity/bind/bind-9.16.16/0001-avoid-start-failure-with-bind-user.patch
similarity index 100%
rename from poky/meta/recipes-connectivity/bind/bind-9.16.12/0001-avoid-start-failure-with-bind-user.patch
rename to poky/meta/recipes-connectivity/bind/bind-9.16.16/0001-avoid-start-failure-with-bind-user.patch
diff --git a/poky/meta/recipes-connectivity/bind/bind-9.16.12/0001-named-lwresd-V-and-start-log-hide-build-options.patch b/poky/meta/recipes-connectivity/bind/bind-9.16.16/0001-named-lwresd-V-and-start-log-hide-build-options.patch
similarity index 100%
rename from poky/meta/recipes-connectivity/bind/bind-9.16.12/0001-named-lwresd-V-and-start-log-hide-build-options.patch
rename to poky/meta/recipes-connectivity/bind/bind-9.16.16/0001-named-lwresd-V-and-start-log-hide-build-options.patch
diff --git a/poky/meta/recipes-connectivity/bind/bind-9.16.12/bind-ensure-searching-for-json-headers-searches-sysr.patch b/poky/meta/recipes-connectivity/bind/bind-9.16.16/bind-ensure-searching-for-json-headers-searches-sysr.patch
similarity index 100%
rename from poky/meta/recipes-connectivity/bind/bind-9.16.12/bind-ensure-searching-for-json-headers-searches-sysr.patch
rename to poky/meta/recipes-connectivity/bind/bind-9.16.16/bind-ensure-searching-for-json-headers-searches-sysr.patch
diff --git a/poky/meta/recipes-connectivity/bind/bind-9.16.12/bind9 b/poky/meta/recipes-connectivity/bind/bind-9.16.16/bind9
similarity index 100%
rename from poky/meta/recipes-connectivity/bind/bind-9.16.12/bind9
rename to poky/meta/recipes-connectivity/bind/bind-9.16.16/bind9
diff --git a/poky/meta/recipes-connectivity/bind/bind-9.16.12/conf.patch b/poky/meta/recipes-connectivity/bind/bind-9.16.16/conf.patch
similarity index 100%
rename from poky/meta/recipes-connectivity/bind/bind-9.16.12/conf.patch
rename to poky/meta/recipes-connectivity/bind/bind-9.16.16/conf.patch
diff --git a/poky/meta/recipes-connectivity/bind/bind-9.16.12/generate-rndc-key.sh b/poky/meta/recipes-connectivity/bind/bind-9.16.16/generate-rndc-key.sh
similarity index 100%
rename from poky/meta/recipes-connectivity/bind/bind-9.16.12/generate-rndc-key.sh
rename to poky/meta/recipes-connectivity/bind/bind-9.16.16/generate-rndc-key.sh
diff --git a/poky/meta/recipes-connectivity/bind/bind-9.16.12/init.d-add-support-for-read-only-rootfs.patch b/poky/meta/recipes-connectivity/bind/bind-9.16.16/init.d-add-support-for-read-only-rootfs.patch
similarity index 100%
rename from poky/meta/recipes-connectivity/bind/bind-9.16.12/init.d-add-support-for-read-only-rootfs.patch
rename to poky/meta/recipes-connectivity/bind/bind-9.16.16/init.d-add-support-for-read-only-rootfs.patch
diff --git a/poky/meta/recipes-connectivity/bind/bind-9.16.12/make-etc-initd-bind-stop-work.patch b/poky/meta/recipes-connectivity/bind/bind-9.16.16/make-etc-initd-bind-stop-work.patch
similarity index 100%
rename from poky/meta/recipes-connectivity/bind/bind-9.16.12/make-etc-initd-bind-stop-work.patch
rename to poky/meta/recipes-connectivity/bind/bind-9.16.16/make-etc-initd-bind-stop-work.patch
diff --git a/poky/meta/recipes-connectivity/bind/bind-9.16.12/named.service b/poky/meta/recipes-connectivity/bind/bind-9.16.16/named.service
similarity index 100%
rename from poky/meta/recipes-connectivity/bind/bind-9.16.12/named.service
rename to poky/meta/recipes-connectivity/bind/bind-9.16.16/named.service
diff --git a/poky/meta/recipes-connectivity/bind/bind_9.16.12.bb b/poky/meta/recipes-connectivity/bind/bind_9.16.16.bb
similarity index 94%
rename from poky/meta/recipes-connectivity/bind/bind_9.16.12.bb
rename to poky/meta/recipes-connectivity/bind/bind_9.16.16.bb
index 09f7703..b1525984 100644
--- a/poky/meta/recipes-connectivity/bind/bind_9.16.12.bb
+++ b/poky/meta/recipes-connectivity/bind/bind_9.16.16.bb
@@ -20,12 +20,16 @@
file://0001-avoid-start-failure-with-bind-user.patch \
"
-SRC_URI[sha256sum] = "9914af9311fd349cab441097898d94fb28d0bfd9bf6ed04fe1f97f042644da7f"
+SRC_URI[sha256sum] = "6c913902adf878e7dc5e229cea94faefc9d40f44775a30213edd08860f761d7b"
UPSTREAM_CHECK_URI = "https://ftp.isc.org/isc/bind9/"
# stay at 9.16 follow the ESV versions divisible by 4
UPSTREAM_CHECK_REGEX = "(?P<pver>9.(16|20|24|28)(\.\d+)+(-P\d+)*)/"
+# Issue only affects dhcpd with recent bind versions. We don't ship dhcpd anymore
+# so the issue doesn't affect us.
+CVE_CHECK_WHITELIST += "CVE-2019-6470"
+
inherit autotools update-rc.d systemd useradd pkgconfig multilib_header update-alternatives
# PACKAGECONFIGs readline and libedit should NOT be set at same time
diff --git a/poky/meta/recipes-connectivity/bluez5/bluez5.inc b/poky/meta/recipes-connectivity/bluez5/bluez5.inc
index 74b59e4..635cad8 100644
--- a/poky/meta/recipes-connectivity/bluez5/bluez5.inc
+++ b/poky/meta/recipes-connectivity/bluez5/bluez5.inc
@@ -53,6 +53,7 @@
file://0001-tests-add-a-target-for-building-tests-without-runnin.patch \
file://0001-test-gatt-Fix-hung-issue.patch \
file://0001-audio-Rename-pause-funciton-to-avoid-shadowing-glibc.patch \
+ file://0001-Makefile.am-add-missing-mkdir-for-ell-shared.patch \
"
S = "${WORKDIR}/bluez-${PV}"
diff --git a/poky/meta/recipes-connectivity/bluez5/bluez5/0001-Makefile.am-add-missing-mkdir-for-ell-shared.patch b/poky/meta/recipes-connectivity/bluez5/bluez5/0001-Makefile.am-add-missing-mkdir-for-ell-shared.patch
new file mode 100644
index 0000000..03b42f7
--- /dev/null
+++ b/poky/meta/recipes-connectivity/bluez5/bluez5/0001-Makefile.am-add-missing-mkdir-for-ell-shared.patch
@@ -0,0 +1,25 @@
+From d341ba650af1b7068d9ad034732b4f41b91bb2c1 Mon Sep 17 00:00:00 2001
+From: Alexander Kanavin <alex.kanavin@gmail.com>
+Date: Sun, 25 Apr 2021 18:56:41 +0200
+Subject: [PATCH] Makefile.am: add missing mkdir for ell/shared
+
+This addresses build errors out of source tree.
+
+Upstream-Status: Backport
+Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
+---
+ Makefile.am | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/Makefile.am b/Makefile.am
+index be5d5c7..72ad425 100644
+--- a/Makefile.am
++++ b/Makefile.am
+@@ -623,6 +623,7 @@ lib/bluetooth/%.h: lib/%.h
+ $(AM_V_GEN)$(LN_S) -f $(abspath $<) $@
+
+ ell/shared: Makefile
++ $(AM_V_at)$(MKDIR_P) ell
+ $(AM_V_GEN)for f in $(ell_shared) ; do \
+ if [ ! -f $$f ] ; then \
+ $(LN_S) -t ell -f $(abs_srcdir)/../ell/$$f ; \
diff --git a/poky/meta/recipes-connectivity/bluez5/bluez5_5.56.bb b/poky/meta/recipes-connectivity/bluez5/bluez5_5.58.bb
similarity index 87%
rename from poky/meta/recipes-connectivity/bluez5/bluez5_5.56.bb
rename to poky/meta/recipes-connectivity/bluez5/bluez5_5.58.bb
index 676cb2d..eb8475e 100644
--- a/poky/meta/recipes-connectivity/bluez5/bluez5_5.56.bb
+++ b/poky/meta/recipes-connectivity/bluez5/bluez5_5.58.bb
@@ -1,7 +1,9 @@
require bluez5.inc
-SRC_URI[md5sum] = "e6c51b2aefa7c56ff072819a78611fa5"
-SRC_URI[sha256sum] = "59c4dba9fc8aae2a6a5f8f12f19bc1b0c2dc27355c7ca3123eed3fe6bd7d0b9d"
+SRC_URI[sha256sum] = "c8065e75a5eb67236849ef68a354b1700540305a8c88ef0a0fd6288f19daf1f1"
+
+# These issues have kernel fixes rather than bluez fixes so exclude here
+CVE_CHECK_WHITELIST += "CVE-2020-12352 CVE-2020-24490"
# noinst programs in Makefile.tools that are conditional on READLINE
# support
diff --git a/poky/meta/recipes-connectivity/iproute2/iproute2_5.11.0.bb b/poky/meta/recipes-connectivity/iproute2/iproute2_5.12.0.bb
similarity index 75%
rename from poky/meta/recipes-connectivity/iproute2/iproute2_5.11.0.bb
rename to poky/meta/recipes-connectivity/iproute2/iproute2_5.12.0.bb
index e27b42d..3631123 100644
--- a/poky/meta/recipes-connectivity/iproute2/iproute2_5.11.0.bb
+++ b/poky/meta/recipes-connectivity/iproute2/iproute2_5.12.0.bb
@@ -4,7 +4,7 @@
file://0001-libc-compat.h-add-musl-workaround.patch \
"
-SRC_URI[sha256sum] = "c5e2ea108212b3445051b35953ec267f9f3469e1d5c67ac034ab559849505c54"
+SRC_URI[sha256sum] = "9d268db98a36ee2a0e3ff3b92b2efff66fc1138a51e409bdef6ab3cfe15f326f"
# CFLAGS are computed in Makefile and reference CCOPTS
#
diff --git a/poky/meta/recipes-connectivity/libnss-mdns/libnss-mdns_0.14.1.bb b/poky/meta/recipes-connectivity/libnss-mdns/libnss-mdns_0.15.bb
similarity index 95%
rename from poky/meta/recipes-connectivity/libnss-mdns/libnss-mdns_0.14.1.bb
rename to poky/meta/recipes-connectivity/libnss-mdns/libnss-mdns_0.15.bb
index 9a83898..75e8ba0 100644
--- a/poky/meta/recipes-connectivity/libnss-mdns/libnss-mdns_0.14.1.bb
+++ b/poky/meta/recipes-connectivity/libnss-mdns/libnss-mdns_0.15.bb
@@ -11,7 +11,7 @@
SRC_URI = "git://github.com/lathiat/nss-mdns \
"
-SRCREV = "41c9c5e78f287ed4b41ac438c1873fa71bfa70ae"
+SRCREV = "65ad25563937682ab2770c36d56667a754837102"
S = "${WORKDIR}/git"
diff --git a/poky/meta/recipes-connectivity/ofono/ofono_1.31.bb b/poky/meta/recipes-connectivity/ofono/ofono_1.32.bb
similarity index 92%
rename from poky/meta/recipes-connectivity/ofono/ofono_1.31.bb
rename to poky/meta/recipes-connectivity/ofono/ofono_1.32.bb
index 2425ef7..f3d875b 100644
--- a/poky/meta/recipes-connectivity/ofono/ofono_1.31.bb
+++ b/poky/meta/recipes-connectivity/ofono/ofono_1.32.bb
@@ -13,8 +13,7 @@
file://0001-mbim-add-an-optional-TEMP_FAILURE_RETRY-macro-copy.patch \
file://0002-mbim-Fix-build-with-ell-0.39-by-restoring-unlikely-m.patch \
"
-SRC_URI[md5sum] = "1c26340e3c6ed132cc812595081bb3dc"
-SRC_URI[sha256sum] = "a15c5d28096c10eb30e47a68b6dc2e7c4a5a99d7f4cfedf0b69624f33d859e9b"
+SRC_URI[sha256sum] = "f7d775887b7b80cf3b82e3f0a6c2696c6d01963d222ca2217919d21b9e803042"
inherit autotools pkgconfig update-rc.d systemd gobject-introspection-data
diff --git a/poky/meta/recipes-connectivity/openssh/openssh_8.6p1.bb b/poky/meta/recipes-connectivity/openssh/openssh_8.6p1.bb
index be56fe4..e8f041c 100644
--- a/poky/meta/recipes-connectivity/openssh/openssh_8.6p1.bb
+++ b/poky/meta/recipes-connectivity/openssh/openssh_8.6p1.bb
@@ -27,10 +27,16 @@
"
SRC_URI[sha256sum] = "c3e6e4da1621762c850d03b47eed1e48dff4cc9608ddeb547202a234df8ed7ae"
+# This CVE is specific to OpenSSH with the pam opie which we don't build/use here
+CVE_CHECK_WHITELIST += "CVE-2007-2768"
+
# This CVE is specific to OpenSSH server, as used in Fedora and Red Hat Enterprise Linux 7
# and when running in a Kerberos environment. As such it is not relevant to OpenEmbedded
CVE_CHECK_WHITELIST += "CVE-2014-9278"
+# CVE only applies to some distributed RHEL binaries
+CVE_CHECK_WHITELIST += "CVE-2008-3844"
+
PAM_SRC_URI = "file://sshd"
inherit manpages useradd update-rc.d update-alternatives systemd
diff --git a/poky/meta/recipes-core/busybox/busybox/0001-decompress_gunzip-Fix-DoS-if-gzip-is-corrupt.patch b/poky/meta/recipes-core/busybox/busybox/0001-decompress_gunzip-Fix-DoS-if-gzip-is-corrupt.patch
deleted file mode 100644
index 67c9f18..0000000
--- a/poky/meta/recipes-core/busybox/busybox/0001-decompress_gunzip-Fix-DoS-if-gzip-is-corrupt.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From fe791386ebc270219ca00406c9fdadc5130b64ee Mon Sep 17 00:00:00 2001
-From: Samuel Sapalski <samuel.sapalski@nokia.com>
-Date: Wed, 3 Mar 2021 16:31:22 +0100
-Subject: [PATCH] decompress_gunzip: Fix DoS if gzip is corrupt
-
-On certain corrupt gzip files, huft_build will set the error bit on
-the result pointer. If afterwards abort_unzip is called huft_free
-might run into a segmentation fault or an invalid pointer to
-free(p).
-
-In order to mitigate this, we check in huft_free if the error bit
-is set and clear it before the linked list is freed.
-
-Signed-off-by: Samuel Sapalski <samuel.sapalski@nokia.com>
-Signed-off-by: Peter Kaestle <peter.kaestle@nokia.com>
-Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
-
-Upstream-Status: Backport
-CVE: CVE-2021-28831
-Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
----
- archival/libarchive/decompress_gunzip.c | 12 ++++++++++--
- 1 file changed, 10 insertions(+), 2 deletions(-)
-
-diff --git a/archival/libarchive/decompress_gunzip.c b/archival/libarchive/decompress_gunzip.c
-index eb3b64930..e93cd5005 100644
---- a/archival/libarchive/decompress_gunzip.c
-+++ b/archival/libarchive/decompress_gunzip.c
-@@ -220,10 +220,20 @@ static const uint8_t border[] ALIGN1 = {
- * each table.
- * t: table to free
- */
-+#define BAD_HUFT(p) ((uintptr_t)(p) & 1)
-+#define ERR_RET ((huft_t*)(uintptr_t)1)
- static void huft_free(huft_t *p)
- {
- huft_t *q;
-
-+ /*
-+ * If 'p' has the error bit set we have to clear it, otherwise we might run
-+ * into a segmentation fault or an invalid pointer to free(p)
-+ */
-+ if (BAD_HUFT(p)) {
-+ p = (huft_t*)((uintptr_t)(p) ^ (uintptr_t)(ERR_RET));
-+ }
-+
- /* Go through linked list, freeing from the malloced (t[-1]) address. */
- while (p) {
- q = (--p)->v.t;
-@@ -289,8 +299,6 @@ static unsigned fill_bitbuffer(STATE_PARAM unsigned bitbuffer, unsigned *current
- * or a valid pointer to a Huffman table, ORed with 0x1 if incompete table
- * is given: "fixed inflate" decoder feeds us such data.
- */
--#define BAD_HUFT(p) ((uintptr_t)(p) & 1)
--#define ERR_RET ((huft_t*)(uintptr_t)1)
- static huft_t* huft_build(const unsigned *b, const unsigned n,
- const unsigned s, const struct cp_ext *cp_ext,
- unsigned *m)
diff --git a/poky/meta/recipes-core/busybox/busybox_1.33.0.bb b/poky/meta/recipes-core/busybox/busybox_1.33.1.bb
similarity index 92%
rename from poky/meta/recipes-core/busybox/busybox_1.33.0.bb
rename to poky/meta/recipes-core/busybox/busybox_1.33.1.bb
index c334c42..a71ff53 100644
--- a/poky/meta/recipes-core/busybox/busybox_1.33.0.bb
+++ b/poky/meta/recipes-core/busybox/busybox_1.33.1.bb
@@ -47,9 +47,8 @@
file://0001-sysctl-ignore-EIO-of-stable_secret-below-proc-sys-ne.patch \
file://rev.cfg \
file://pgrep.cfg \
- file://0001-decompress_gunzip-Fix-DoS-if-gzip-is-corrupt.patch \
file://0001-gen_build_files-Use-C-locale-when-calling-sed-on-glo.patch \
"
SRC_URI_append_libc-musl = " file://musl.cfg "
-SRC_URI[tarball.sha256sum] = "d568681c91a85edc6710770cebc1e80e042ad74d305b5c2e6d57a5f3de3b8fbd"
+SRC_URI[tarball.sha256sum] = "12cec6bd2b16d8a9446dd16130f2b92982f1819f6e1c5f5887b6db03f5660d28"
diff --git a/poky/meta/recipes-core/coreutils/coreutils_8.32.bb b/poky/meta/recipes-core/coreutils/coreutils_8.32.bb
index c1962cc..f3fe31f 100644
--- a/poky/meta/recipes-core/coreutils/coreutils_8.32.bb
+++ b/poky/meta/recipes-core/coreutils/coreutils_8.32.bb
@@ -26,6 +26,10 @@
SRC_URI[md5sum] = "022042695b7d5bcf1a93559a9735e668"
SRC_URI[sha256sum] = "4458d8de7849df44ccab15e16b1548b285224dbba5f08fac070c1c0e0bcc4cfa"
+# http://git.savannah.gnu.org/cgit/coreutils.git/commit/?id=v8.27-101-gf5d7c0842
+# runcon is not really a sandbox command, use `runcon ... setsid ...` to avoid this particular issue.
+CVE_CHECK_WHITELIST += "CVE-2016-2781"
+
EXTRA_OECONF_class-native = "--without-gmp"
EXTRA_OECONF_class-target = "--enable-install-program=arch,hostname --libexecdir=${libdir}"
EXTRA_OECONF_class-nativesdk = "--enable-install-program=arch,hostname"
diff --git a/poky/meta/recipes-core/ell/ell_0.39.bb b/poky/meta/recipes-core/ell/ell_0.40.bb
similarity index 90%
rename from poky/meta/recipes-core/ell/ell_0.39.bb
rename to poky/meta/recipes-core/ell/ell_0.40.bb
index 68ec4cb..d088676 100644
--- a/poky/meta/recipes-core/ell/ell_0.39.bb
+++ b/poky/meta/recipes-core/ell/ell_0.40.bb
@@ -17,7 +17,7 @@
SRC_URI = "https://mirrors.edge.kernel.org/pub/linux/libs/${BPN}/${BPN}-${PV}.tar.xz \
file://0001-pem.c-do-not-use-rawmemchr.patch \
"
-SRC_URI[sha256sum] = "653e2e139e23ed31e03c56c05f15321a9e818e2dca00a315c18d2c7b72f15d08"
+SRC_URI[sha256sum] = "b9bf5c14f2963591ea1372049c05646919a9ed46fcee5cd11ede1022c99ffbbd"
do_configure_prepend () {
mkdir -p ${S}/build-aux
diff --git a/poky/meta/recipes-core/expat/expat/0001-Add-output-of-tests-result.patch b/poky/meta/recipes-core/expat/expat/0001-Add-output-of-tests-result.patch
deleted file mode 100644
index c5c18ea..0000000
--- a/poky/meta/recipes-core/expat/expat/0001-Add-output-of-tests-result.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-From aa84835a00bfd65e784d58411e76f60658e939dc Mon Sep 17 00:00:00 2001
-From: Oleksandr Popovych <oleksandr.s.popovych@globallogic.com>
-Date: Tue, 18 Feb 2020 19:04:55 +0200
-Subject: [PATCH] Add output of tests result
-
-Added console output of testing results in form 'RESULT: TEST_NAME'.
-
-Changed verbose mode of test application set by '-v' ('--verbose')
-argument to CK_NORMAL.
-Added new supported argument '-vv' ('--extra-verbose') that changes
-verbose mode of test application to CK_VERBOSE. Results of each test
-are shown in output only if this mode is set.
-
-Upstream-Status: Denied
-
-This patch changes potentially deprecated feature that shoud be changed
-in upstream. [https://github.com/libexpat/libexpat/issues/382]
-
-Signed-off-by: Oleksandr Popovych <oleksandr.s.popovych@globallogic.com>
----
- tests/minicheck.c | 10 +++++++++-
- tests/runtests.c | 4 +++-
- 2 files changed, 12 insertions(+), 2 deletions(-)
-
-diff --git a/expat/tests/minicheck.c b/expat/tests/minicheck.c
-index a5a1efb..94fa412 100644
---- a/tests/minicheck.c
-+++ b/tests/minicheck.c
-@@ -164,6 +164,8 @@ srunner_run_all(SRunner *runner, int verbosity) {
- if (tc->setup != NULL) {
- /* setup */
- if (setjmp(env)) {
-+ if (verbosity >= CK_VERBOSE)
-+ printf("SKIP: %s\n", _check_current_function);
- add_failure(runner, verbosity);
- continue;
- }
-@@ -171,6 +173,8 @@ srunner_run_all(SRunner *runner, int verbosity) {
- }
- /* test */
- if (setjmp(env)) {
-+ if (verbosity >= CK_VERBOSE)
-+ printf("FAIL: %s\n", _check_current_function);
- add_failure(runner, verbosity);
- continue;
- }
-@@ -178,12 +182,16 @@ srunner_run_all(SRunner *runner, int verbosity) {
-
- /* teardown */
- if (tc->teardown != NULL) {
-- if (setjmp(env)) {
-+ if (setjmp(env)) {
-+ if (verbosity >= CK_VERBOSE)
-+ printf("PASS: %s\n", _check_current_function);
- add_failure(runner, verbosity);
- continue;
- }
- tc->teardown();
- }
-+ if (verbosity >= CK_VERBOSE)
-+ printf("PASS: %s\n", _check_current_function);
- }
- tc = tc->next_tcase;
- }
-diff --git a/tests/runtests.c b/expat/tests/runtests.c
-index 7791fe0..75724e5 100644
---- a/tests/runtests.c
-+++ b/tests/runtests.c
-@@ -11619,9 +11619,11 @@ main(int argc, char *argv[]) {
- for (i = 1; i < argc; ++i) {
- char *opt = argv[i];
- if (strcmp(opt, "-v") == 0 || strcmp(opt, "--verbose") == 0)
-- verbosity = CK_VERBOSE;
-+ verbosity = CK_NORMAL;
- else if (strcmp(opt, "-q") == 0 || strcmp(opt, "--quiet") == 0)
- verbosity = CK_SILENT;
-+ else if (strcmp(opt, "-vv") == 0 || strcmp(opt, "--extra-verbose") == 0)
-+ verbosity = CK_VERBOSE;
- else {
- fprintf(stderr, "runtests: unknown option '%s'\n", opt);
- return 2;
---
-2.17.1
diff --git a/poky/meta/recipes-core/expat/expat/run-ptest b/poky/meta/recipes-core/expat/expat/run-ptest
index 1b39cec..59d8ab5 100644
--- a/poky/meta/recipes-core/expat/expat/run-ptest
+++ b/poky/meta/recipes-core/expat/expat/run-ptest
@@ -18,6 +18,6 @@
echo "Architecture: $(uname -m)" > ${output}
echo "Image: $(uname -sr)" >> ${output}
-${TIME} -f 'Execution time: %e s' bash -c "testCheck runtests -vv" |& tee -a ${output}
-${TIME} -f 'Execution time: %e s' bash -c "testCheck runtestspp -vv" |& tee -a ${output}
+${TIME} -f 'Execution time: %e s' bash -c "testCheck runtests -v" |& tee -a ${output}
+${TIME} -f 'Execution time: %e s' bash -c "testCheck runtestspp -v" |& tee -a ${output}
echo
diff --git a/poky/meta/recipes-core/expat/expat_2.2.10.bb b/poky/meta/recipes-core/expat/expat_2.4.1.bb
similarity index 81%
rename from poky/meta/recipes-core/expat/expat_2.2.10.bb
rename to poky/meta/recipes-core/expat/expat_2.4.1.bb
index fa263775..451158a 100644
--- a/poky/meta/recipes-core/expat/expat_2.2.10.bb
+++ b/poky/meta/recipes-core/expat/expat_2.4.1.bb
@@ -8,11 +8,10 @@
SRC_URI = "${SOURCEFORGE_MIRROR}/expat/expat-${PV}.tar.bz2 \
file://libtool-tag.patch \
- file://run-ptest \
- file://0001-Add-output-of-tests-result.patch \
- "
+ file://run-ptest \
+ "
-SRC_URI[sha256sum] = "b2c160f1b60e92da69de8e12333096aeb0c3bf692d41c60794de278af72135a5"
+SRC_URI[sha256sum] = "2f9b6a580b94577b150a7d5617ad4643a4301a6616ff459307df3e225bcfbf40"
EXTRA_OECMAKE_class-native += "-DEXPAT_BUILD_DOCS=OFF"
@@ -25,3 +24,5 @@
}
BBCLASSEXTEND += "native nativesdk"
+
+CVE_PRODUCT = "expat libexpat"
diff --git a/poky/meta/recipes-core/gettext/gettext_0.21.bb b/poky/meta/recipes-core/gettext/gettext_0.21.bb
index bc14867..b86e8d8 100644
--- a/poky/meta/recipes-core/gettext/gettext_0.21.bb
+++ b/poky/meta/recipes-core/gettext/gettext_0.21.bb
@@ -174,7 +174,7 @@
fi
}
-RDEPENDS_${PN}-ptest += "make"
+RDEPENDS_${PN}-ptest += "make xz"
RDEPENDS_${PN}-ptest_append_libc-glibc = "\
glibc-gconv-big5 \
glibc-charmap-big5 \
diff --git a/poky/meta/recipes-core/glib-2.0/glib-2.0/relocate-modules.patch b/poky/meta/recipes-core/glib-2.0/glib-2.0/relocate-modules.patch
index 7cf89c8..7fbc07a 100644
--- a/poky/meta/recipes-core/glib-2.0/glib-2.0/relocate-modules.patch
+++ b/poky/meta/recipes-core/glib-2.0/glib-2.0/relocate-modules.patch
@@ -1,4 +1,4 @@
-From ff790dd7086e28896f8e7630135f756cc6f06c80 Mon Sep 17 00:00:00 2001
+From b7abbba886d3743616f8cc0e8b441c879128bbda Mon Sep 17 00:00:00 2001
From: Ross Burton <ross.burton@intel.com>
Date: Fri, 11 Mar 2016 15:35:55 +0000
Subject: [PATCH] glib-2.0: relocate the GIO module directory for native builds
@@ -19,7 +19,7 @@
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/gio/giomodule.c b/gio/giomodule.c
-index ca1daf2..954a250 100644
+index a2909a8..1f4ab82 100644
--- a/gio/giomodule.c
+++ b/gio/giomodule.c
@@ -51,6 +51,8 @@
@@ -31,7 +31,7 @@
#endif
#include <glib/gstdio.h>
-@@ -1212,7 +1214,15 @@ get_gio_module_dir (void)
+@@ -1213,7 +1215,15 @@ get_gio_module_dir (void)
NULL);
g_free (install_dir);
#else
diff --git a/poky/meta/recipes-core/glib-2.0/glib-2.0_2.68.1.bb b/poky/meta/recipes-core/glib-2.0/glib-2.0_2.68.2.bb
similarity index 96%
rename from poky/meta/recipes-core/glib-2.0/glib-2.0_2.68.1.bb
rename to poky/meta/recipes-core/glib-2.0/glib-2.0_2.68.2.bb
index accc2ca..0cf1688 100644
--- a/poky/meta/recipes-core/glib-2.0/glib-2.0_2.68.1.bb
+++ b/poky/meta/recipes-core/glib-2.0/glib-2.0_2.68.2.bb
@@ -20,7 +20,7 @@
"
SRC_URI_append_class-native = " file://relocate-modules.patch"
-SRC_URI[sha256sum] = "241654b96bd36b88aaa12814efc4843b578e55d47440103727959ac346944333"
+SRC_URI[sha256sum] = "ecc7798a9cc034eabdfd7f246e6dd461cdbf1175fcc2e9867cc7da7b7309e0fb"
# Find any meson cross files in FILESPATH that are relevant for the current
# build (using siteinfo) and add them to EXTRA_OEMESON.
diff --git a/poky/meta/recipes-core/glibc/glibc-version.inc b/poky/meta/recipes-core/glibc/glibc-version.inc
index 3a95173..376ead6 100644
--- a/poky/meta/recipes-core/glibc/glibc-version.inc
+++ b/poky/meta/recipes-core/glibc/glibc-version.inc
@@ -1,6 +1,6 @@
SRCBRANCH ?= "release/2.33/master"
PV = "2.33"
-SRCREV_glibc ?= "9826b03b747b841f5fc6de2054bf1ef3f5c4bdf3"
+SRCREV_glibc ?= "3f5080aedd164c1f92a53552dd3e0b82ac6d2bd3"
SRCREV_localedef ?= "bd644c9e6f3e20c5504da1488448173c69c56c28"
GLIBC_GIT_URI ?= "git://sourceware.org/git/glibc.git"
diff --git a/poky/meta/recipes-core/glibc/glibc/0001-nptl-Remove-private-futex-optimization-BZ-27304.patch b/poky/meta/recipes-core/glibc/glibc/0001-nptl-Remove-private-futex-optimization-BZ-27304.patch
deleted file mode 100644
index 39fde5b..0000000
--- a/poky/meta/recipes-core/glibc/glibc/0001-nptl-Remove-private-futex-optimization-BZ-27304.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From c4ad832276f4dadfa40904109b26a521468f66bc Mon Sep 17 00:00:00 2001
-From: Florian Weimer <fweimer@redhat.com>
-Date: Thu, 4 Feb 2021 15:00:20 +0100
-Subject: [PATCH] nptl: Remove private futex optimization [BZ #27304]
-
-It is effectively used, unexcept for pthread_cond_destroy, where we do
-not want it; see bug 27304. The internal locks do not support a
-process-shared mode.
-
-This fixes commit dc6cfdc934db9997c33728082d63552b9eee4563 ("nptl:
-Move pthread_cond_destroy implementation into libc").
-
-Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
-
-Upstream-Status: Backport [https://sourceware.org/bugzilla/show_bug.cgi?id=27304]
-Signed-off-by: Yanfei Xu <yanfei.xu@windriver.com>
----
- sysdeps/nptl/lowlevellock-futex.h | 14 +-------------
- 1 file changed, 1 insertion(+), 13 deletions(-)
-
-diff --git a/sysdeps/nptl/lowlevellock-futex.h b/sysdeps/nptl/lowlevellock-futex.h
-index ecb729da6b..ca96397a4a 100644
---- a/sysdeps/nptl/lowlevellock-futex.h
-+++ b/sysdeps/nptl/lowlevellock-futex.h
-@@ -50,20 +50,8 @@
- #define LLL_SHARED FUTEX_PRIVATE_FLAG
-
- #ifndef __ASSEMBLER__
--
--# if IS_IN (libc) || IS_IN (rtld)
--/* In libc.so or ld.so all futexes are private. */
--# define __lll_private_flag(fl, private) \
-- ({ \
-- /* Prevent warnings in callers of this macro. */ \
-- int __lll_private_flag_priv __attribute__ ((unused)); \
-- __lll_private_flag_priv = (private); \
-- ((fl) | FUTEX_PRIVATE_FLAG); \
-- })
--# else
--# define __lll_private_flag(fl, private) \
-+# define __lll_private_flag(fl, private) \
- (((fl) | FUTEX_PRIVATE_FLAG) ^ (private))
--# endif
-
- # define lll_futex_syscall(nargs, futexp, op, ...) \
- ({ \
---
-2.27.0
-
diff --git a/poky/meta/recipes-core/glibc/glibc/0031-x86-Require-full-ISA-support-for-x86-64-level-marker.patch b/poky/meta/recipes-core/glibc/glibc/0031-x86-Require-full-ISA-support-for-x86-64-level-marker.patch
deleted file mode 100644
index 3cb60b2..0000000
--- a/poky/meta/recipes-core/glibc/glibc/0031-x86-Require-full-ISA-support-for-x86-64-level-marker.patch
+++ /dev/null
@@ -1,116 +0,0 @@
-From b1971f6f1331d738d1d6b376b4741668a7546125 Mon Sep 17 00:00:00 2001
-From: "H.J. Lu" <hjl.tools@gmail.com>
-Date: Tue, 2 Feb 2021 13:45:58 -0800
-Subject: [PATCH] x86: Require full ISA support for x86-64 level marker [BZ #27318]
-
-Since -march=sandybridge enables ISAs in x86-64 ISA level v3, the v3
-marker is set on libc.so. We couldn't set the needed ISA marker to v2
-since this libc won't run on all v2 machines. Technically, the v3 marker
-is correct. But the resulting libc.so won't run on Sandy Brigde, which
-is a v2 machine, even when libc is compiled with -march=sandybridge:
-
-$ ./elf/ld.so ./libc.so
-./libc.so: (p) CPU ISA level is lower than required: needed: 7; got: 3
-
-Instead, we require full ISA support for x86-64 level marker and disable
-x86-64 level marker for -march=sandybridge which enables ISAs between v2
-and v3.
-
-Upstream-Status: Submitted [https://sourceware.org/pipermail/libc-alpha/2021-February/122297.html]
-Signed-off-by: Khem Raj <raj.khem@gmail.com>
----
-
- sysdeps/x86/configure | 7 ++++++-
- sysdeps/x86/configure.ac | 2 +-
- sysdeps/x86/isa-level.c | 21 ++++++++++++++++++++-
- 3 files changed, 27 insertions(+), 3 deletions(-)
-
-diff --git a/sysdeps/x86/configure b/sysdeps/x86/configure
-index 5e32dc62b3..5b20646843 100644
---- a/sysdeps/x86/configure
-+++ b/sysdeps/x86/configure
-@@ -133,7 +133,12 @@ if { ac_try='${CC-cc} $CFLAGS $CPPFLAGS -nostartfiles -nostdlib -r -o conftest c
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; }; then
- count=`LC_ALL=C $READELF -n conftest | grep NT_GNU_PROPERTY_TYPE_0 | wc -l`
-- if test "$count" = 1; then
-+ if test "$count" = 1 && { ac_try='${CC-cc} $CFLAGS $CPPFLAGS -DINCLUDE_X86_ISA_LEVEL -S -o conftest.s $srcdir/sysdeps/x86/isa-level.c'
-+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-+ test $ac_status = 0; }; }; then
- libc_cv_include_x86_isa_level=yes
- fi
- fi
-diff --git a/sysdeps/x86/configure.ac b/sysdeps/x86/configure.ac
-index f94088f377..54ecd33d2c 100644
---- a/sysdeps/x86/configure.ac
-+++ b/sysdeps/x86/configure.ac
-@@ -100,7 +100,7 @@ EOF
- libc_cv_include_x86_isa_level=no
- if AC_TRY_COMMAND(${CC-cc} $CFLAGS $CPPFLAGS -nostartfiles -nostdlib -r -o conftest conftest1.S conftest2.S); then
- count=`LC_ALL=C $READELF -n conftest | grep NT_GNU_PROPERTY_TYPE_0 | wc -l`
-- if test "$count" = 1; then
-+ if test "$count" = 1 && AC_TRY_COMMAND(${CC-cc} $CFLAGS $CPPFLAGS -DINCLUDE_X86_ISA_LEVEL -S -o conftest.s $srcdir/sysdeps/x86/isa-level.c); then
- libc_cv_include_x86_isa_level=yes
- fi
- fi
-diff --git a/sysdeps/x86/isa-level.c b/sysdeps/x86/isa-level.c
-index aaf524cb56..7f83449061 100644
---- a/sysdeps/x86/isa-level.c
-+++ b/sysdeps/x86/isa-level.c
-@@ -25,12 +25,17 @@
- License along with the GNU C Library; if not, see
- <https://www.gnu.org/licenses/>. */
-
--#include <elf.h>
-+#ifdef _LIBC
-+# include <elf.h>
-+#endif
-
- /* ELF program property for x86 ISA level. */
- #ifdef INCLUDE_X86_ISA_LEVEL
- # if defined __x86_64__ || defined __FXSR__ || !defined _SOFT_FLOAT \
- || defined __MMX__ || defined __SSE__ || defined __SSE2__
-+# if !defined __SSE__ || !defined __SSE2__
-+# error "Missing ISAs for x86-64 ISA level baseline"
-+# endif
- # define ISA_BASELINE GNU_PROPERTY_X86_ISA_1_BASELINE
- # else
- # define ISA_BASELINE 0
-@@ -40,6 +45,11 @@
- || (defined __x86_64__ && defined __LAHF_SAHF__) \
- || defined __POPCNT__ || defined __SSE3__ \
- || defined __SSSE3__ || defined __SSE4_1__ || defined __SSE4_2__
-+# if !defined __GCC_HAVE_SYNC_COMPARE_AND_SWAP_16 \
-+ || !defined __POPCNT__ || !defined __SSE3__ \
-+ || !defined __SSSE3__ || !defined __SSE4_1__ || !defined __SSE4_2__
-+# error "Missing ISAs for x86-64 ISA level v2"
-+# endif
- # define ISA_V2 GNU_PROPERTY_X86_ISA_1_V2
- # else
- # define ISA_V2 0
-@@ -48,6 +58,10 @@
- # if defined __AVX__ || defined __AVX2__ || defined __F16C__ \
- || defined __FMA__ || defined __LZCNT__ || defined __MOVBE__ \
- || defined __XSAVE__
-+# if !defined __AVX__ || !defined __AVX2__ || !defined __F16C__ \
-+ || !defined __FMA__ || !defined __LZCNT__
-+# error "Missing ISAs for x86-64 ISA level v3"
-+# endif
- # define ISA_V3 GNU_PROPERTY_X86_ISA_1_V3
- # else
- # define ISA_V3 0
-@@ -55,6 +69,11 @@
-
- # if defined __AVX512F__ || defined __AVX512BW__ || defined __AVX512CD__ \
- || defined __AVX512DQ__ || defined __AVX512VL__
-+# if !defined __AVX512F__ || !defined __AVX512BW__ \
-+ || !defined __AVX512CD__ || !defined __AVX512DQ__ \
-+ || !defined __AVX512VL__
-+# error "Missing ISAs for x86-64 ISA level v4"
-+# endif
- # define ISA_V4 GNU_PROPERTY_X86_ISA_1_V4
- # else
- # define ISA_V4 0
diff --git a/poky/meta/recipes-core/glibc/glibc/0032-string-Work-around-GCC-PR-98512-in-rawmemchr.patch b/poky/meta/recipes-core/glibc/glibc/0032-string-Work-around-GCC-PR-98512-in-rawmemchr.patch
deleted file mode 100644
index e904b28..0000000
--- a/poky/meta/recipes-core/glibc/glibc/0032-string-Work-around-GCC-PR-98512-in-rawmemchr.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 044e603b698093cf48f6e6229e0b66acf05227e4 Mon Sep 17 00:00:00 2001
-From: Florian Weimer <fweimer@redhat.com>
-Date: Fri, 19 Feb 2021 13:29:00 +0100
-Subject: [PATCH] string: Work around GCC PR 98512 in rawmemchr
-
-Upstream-Status: Backport [https://sourceware.org/git/?p=glibc.git;a=commit;h=044e603b698093cf48f6e6229e0b66acf05227e4]
-Signed-off-by: Khem Raj <raj.khem@gmail.com>
----
- string/rawmemchr.c | 26 +++++++++++++++-----------
- 1 file changed, 15 insertions(+), 11 deletions(-)
-
-diff --git a/string/rawmemchr.c b/string/rawmemchr.c
-index 59bbeeaa42..b8523118e5 100644
---- a/string/rawmemchr.c
-+++ b/string/rawmemchr.c
-@@ -22,24 +22,28 @@
- # define RAWMEMCHR __rawmemchr
- #endif
-
--/* Find the first occurrence of C in S. */
--void *
--RAWMEMCHR (const void *s, int c)
--{
-- DIAG_PUSH_NEEDS_COMMENT;
-+/* The pragmata should be nested inside RAWMEMCHR below, but that
-+ triggers GCC PR 98512. */
-+DIAG_PUSH_NEEDS_COMMENT;
- #if __GNUC_PREREQ (7, 0)
-- /* GCC 8 warns about the size passed to memchr being larger than
-- PTRDIFF_MAX; the use of SIZE_MAX is deliberate here. */
-- DIAG_IGNORE_NEEDS_COMMENT (8, "-Wstringop-overflow=");
-+/* GCC 8 warns about the size passed to memchr being larger than
-+ PTRDIFF_MAX; the use of SIZE_MAX is deliberate here. */
-+DIAG_IGNORE_NEEDS_COMMENT (8, "-Wstringop-overflow=");
- #endif
- #if __GNUC_PREREQ (11, 0)
-- /* Likewise GCC 11, with a different warning option. */
-- DIAG_IGNORE_NEEDS_COMMENT (11, "-Wstringop-overread");
-+/* Likewise GCC 11, with a different warning option. */
-+DIAG_IGNORE_NEEDS_COMMENT (11, "-Wstringop-overread");
- #endif
-+
-+/* Find the first occurrence of C in S. */
-+void *
-+RAWMEMCHR (const void *s, int c)
-+{
- if (c != '\0')
- return memchr (s, c, (size_t)-1);
-- DIAG_POP_NEEDS_COMMENT;
- return (char *)s + strlen (s);
- }
- libc_hidden_def (__rawmemchr)
- weak_alias (__rawmemchr, rawmemchr)
-+
-+DIAG_POP_NEEDS_COMMENT;
---
-2.30.1
-
diff --git a/poky/meta/recipes-core/glibc/glibc/0033-x86-Handle-_SC_LEVEL1_ICACHE_LINESIZE-BZ-27444.patch b/poky/meta/recipes-core/glibc/glibc/0033-x86-Handle-_SC_LEVEL1_ICACHE_LINESIZE-BZ-27444.patch
deleted file mode 100644
index 3a004e2..0000000
--- a/poky/meta/recipes-core/glibc/glibc/0033-x86-Handle-_SC_LEVEL1_ICACHE_LINESIZE-BZ-27444.patch
+++ /dev/null
@@ -1,185 +0,0 @@
-From 750b00a1ddae220403fd892a6fd4e0791ffd154a Mon Sep 17 00:00:00 2001
-From: "H.J. Lu" <hjl.tools@gmail.com>
-Date: Fri, 18 Sep 2020 07:55:14 -0700
-Subject: [PATCH] x86: Handle _SC_LEVEL1_ICACHE_LINESIZE [BZ #27444]
-
- x86: Move x86 processor cache info to cpu_features
-
-missed _SC_LEVEL1_ICACHE_LINESIZE.
-
-1. Add level1_icache_linesize to struct cpu_features.
-2. Initialize level1_icache_linesize by calling handle_intel,
-handle_zhaoxin and handle_amd with _SC_LEVEL1_ICACHE_LINESIZE.
-3. Return level1_icache_linesize for _SC_LEVEL1_ICACHE_LINESIZE.
-
-Upstream-Status: Backport [https://sourceware.org/bugzilla/show_bug.cgi?id=27444]
-Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>
----
- sysdeps/x86/Makefile | 8 +++
- sysdeps/x86/cacheinfo.c | 3 +
- sysdeps/x86/dl-cacheinfo.h | 6 ++
- sysdeps/x86/include/cpu-features.h | 2 +
- .../x86/tst-sysconf-cache-linesize-static.c | 1 +
- sysdeps/x86/tst-sysconf-cache-linesize.c | 57 +++++++++++++++++++
- 6 files changed, 77 insertions(+)
- create mode 100644 sysdeps/x86/tst-sysconf-cache-linesize-static.c
- create mode 100644 sysdeps/x86/tst-sysconf-cache-linesize.c
-
-diff --git a/sysdeps/x86/Makefile b/sysdeps/x86/Makefile
-index dd82674342..d231263051 100644
---- a/sysdeps/x86/Makefile
-+++ b/sysdeps/x86/Makefile
-@@ -208,3 +208,11 @@ $(objpfx)check-cet.out: $(..)sysdeps/x86/check-cet.awk \
- generated += check-cet.out
- endif
- endif
-+
-+ifeq ($(subdir),posix)
-+tests += \
-+ tst-sysconf-cache-linesize \
-+ tst-sysconf-cache-linesize-static
-+tests-static += \
-+ tst-sysconf-cache-linesize-static
-+endif
-diff --git a/sysdeps/x86/cacheinfo.c b/sysdeps/x86/cacheinfo.c
-index 7b8df45e3b..5ea4723ca6 100644
---- a/sysdeps/x86/cacheinfo.c
-+++ b/sysdeps/x86/cacheinfo.c
-@@ -32,6 +32,9 @@ __cache_sysconf (int name)
- case _SC_LEVEL1_ICACHE_SIZE:
- return cpu_features->level1_icache_size;
-
-+ case _SC_LEVEL1_ICACHE_LINESIZE:
-+ return cpu_features->level1_icache_linesize;
-+
- case _SC_LEVEL1_DCACHE_SIZE:
- return cpu_features->level1_dcache_size;
-
-diff --git a/sysdeps/x86/dl-cacheinfo.h b/sysdeps/x86/dl-cacheinfo.h
-index a31fa0783a..7cd00b92f1 100644
---- a/sysdeps/x86/dl-cacheinfo.h
-+++ b/sysdeps/x86/dl-cacheinfo.h
-@@ -707,6 +707,7 @@ dl_init_cacheinfo (struct cpu_features *cpu_features)
- long int core;
- unsigned int threads = 0;
- unsigned long int level1_icache_size = -1;
-+ unsigned long int level1_icache_linesize = -1;
- unsigned long int level1_dcache_size = -1;
- unsigned long int level1_dcache_assoc = -1;
- unsigned long int level1_dcache_linesize = -1;
-@@ -726,6 +727,8 @@ dl_init_cacheinfo (struct cpu_features *cpu_features)
-
- level1_icache_size
- = handle_intel (_SC_LEVEL1_ICACHE_SIZE, cpu_features);
-+ level1_icache_linesize
-+ = handle_intel (_SC_LEVEL1_ICACHE_LINESIZE, cpu_features);
- level1_dcache_size = data;
- level1_dcache_assoc
- = handle_intel (_SC_LEVEL1_DCACHE_ASSOC, cpu_features);
-@@ -753,6 +756,7 @@ dl_init_cacheinfo (struct cpu_features *cpu_features)
- shared = handle_zhaoxin (_SC_LEVEL3_CACHE_SIZE);
-
- level1_icache_size = handle_zhaoxin (_SC_LEVEL1_ICACHE_SIZE);
-+ level1_icache_linesize = handle_zhaoxin (_SC_LEVEL1_ICACHE_LINESIZE);
- level1_dcache_size = data;
- level1_dcache_assoc = handle_zhaoxin (_SC_LEVEL1_DCACHE_ASSOC);
- level1_dcache_linesize = handle_zhaoxin (_SC_LEVEL1_DCACHE_LINESIZE);
-@@ -772,6 +776,7 @@ dl_init_cacheinfo (struct cpu_features *cpu_features)
- shared = handle_amd (_SC_LEVEL3_CACHE_SIZE);
-
- level1_icache_size = handle_amd (_SC_LEVEL1_ICACHE_SIZE);
-+ level1_icache_linesize = handle_amd (_SC_LEVEL1_ICACHE_LINESIZE);
- level1_dcache_size = data;
- level1_dcache_assoc = handle_amd (_SC_LEVEL1_DCACHE_ASSOC);
- level1_dcache_linesize = handle_amd (_SC_LEVEL1_DCACHE_LINESIZE);
-@@ -833,6 +838,7 @@ dl_init_cacheinfo (struct cpu_features *cpu_features)
- }
-
- cpu_features->level1_icache_size = level1_icache_size;
-+ cpu_features->level1_icache_linesize = level1_icache_linesize;
- cpu_features->level1_dcache_size = level1_dcache_size;
- cpu_features->level1_dcache_assoc = level1_dcache_assoc;
- cpu_features->level1_dcache_linesize = level1_dcache_linesize;
-diff --git a/sysdeps/x86/include/cpu-features.h b/sysdeps/x86/include/cpu-features.h
-index 624736b40e..39a3f4f311 100644
---- a/sysdeps/x86/include/cpu-features.h
-+++ b/sysdeps/x86/include/cpu-features.h
-@@ -874,6 +874,8 @@ struct cpu_features
- unsigned long int rep_stosb_threshold;
- /* _SC_LEVEL1_ICACHE_SIZE. */
- unsigned long int level1_icache_size;
-+ /* _SC_LEVEL1_ICACHE_LINESIZE. */
-+ unsigned long int level1_icache_linesize;
- /* _SC_LEVEL1_DCACHE_SIZE. */
- unsigned long int level1_dcache_size;
- /* _SC_LEVEL1_DCACHE_ASSOC. */
-diff --git a/sysdeps/x86/tst-sysconf-cache-linesize-static.c b/sysdeps/x86/tst-sysconf-cache-linesize-static.c
-new file mode 100644
-index 0000000000..152ae68821
---- /dev/null
-+++ b/sysdeps/x86/tst-sysconf-cache-linesize-static.c
-@@ -0,0 +1 @@
-+#include "tst-sysconf-cache-linesize.c"
-diff --git a/sysdeps/x86/tst-sysconf-cache-linesize.c b/sysdeps/x86/tst-sysconf-cache-linesize.c
-new file mode 100644
-index 0000000000..642dbde5d2
---- /dev/null
-+++ b/sysdeps/x86/tst-sysconf-cache-linesize.c
-@@ -0,0 +1,57 @@
-+/* Test system cache line sizes.
-+ Copyright (C) 2021 Free Software Foundation, Inc.
-+ This file is part of the GNU C Library.
-+
-+ The GNU C Library is free software; you can redistribute it and/or
-+ modify it under the terms of the GNU Lesser General Public
-+ License as published by the Free Software Foundation; either
-+ version 2.1 of the License, or (at your option) any later version.
-+
-+ The GNU C Library is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Lesser General Public License for more details.
-+
-+ You should have received a copy of the GNU Lesser General Public
-+ License along with the GNU C Library; if not, see
-+ <https://www.gnu.org/licenses/>. */
-+
-+#include <stdio.h>
-+#include <stdlib.h>
-+#include <unistd.h>
-+#include <array_length.h>
-+
-+static struct
-+{
-+ const char *name;
-+ int _SC_val;
-+} sc_options[] =
-+ {
-+#define N(name) { "_SC_"#name, _SC_##name }
-+ N (LEVEL1_ICACHE_LINESIZE),
-+ N (LEVEL1_DCACHE_LINESIZE),
-+ N (LEVEL2_CACHE_LINESIZE)
-+ };
-+
-+static int
-+do_test (void)
-+{
-+ int result = EXIT_SUCCESS;
-+
-+ for (int i = 0; i < array_length (sc_options); ++i)
-+ {
-+ long int scret = sysconf (sc_options[i]._SC_val);
-+ if (scret < 0)
-+ {
-+ printf ("sysconf (%s) returned < 0 (%ld)\n",
-+ sc_options[i].name, scret);
-+ result = EXIT_FAILURE;
-+ }
-+ else
-+ printf ("sysconf (%s): %ld\n", sc_options[i].name, scret);
-+ }
-+
-+ return result;
-+}
-+
-+#include <support/test-driver.c>
diff --git a/poky/meta/recipes-core/glibc/glibc/CVE-2021-27645.patch b/poky/meta/recipes-core/glibc/glibc/CVE-2021-27645.patch
deleted file mode 100644
index 26c5c0d..0000000
--- a/poky/meta/recipes-core/glibc/glibc/CVE-2021-27645.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From dca565886b5e8bd7966e15f0ca42ee5cff686673 Mon Sep 17 00:00:00 2001
-From: DJ Delorie <dj@redhat.com>
-Date: Thu, 25 Feb 2021 16:08:21 -0500
-Subject: [PATCH] nscd: Fix double free in netgroupcache [BZ #27462]
-
-In commit 745664bd798ec8fd50438605948eea594179fba1 a use-after-free
-was fixed, but this led to an occasional double-free. This patch
-tracks the "live" allocation better.
-
-Tested manually by a third party.
-
-Related: RHBZ 1927877
-
-Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
-Reviewed-by: Carlos O'Donell <carlos@redhat.com>
-
-Upstream-Status: Backport [https://sourceware.org/git/?p=glibc.git;a=commit;h=dca565886b5e8bd7966e15f0ca42ee5cff686673]
-
-CVE: CVE-2021-27645
-
-Reviewed-by: Carlos O'Donell <carlos@redhat.com>
-Signed-off-by: Khairul Rohaizzat Jamaluddin <khairul.rohaizzat.jamaluddin@intel.com>
----
- nscd/netgroupcache.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/nscd/netgroupcache.c b/nscd/netgroupcache.c
-index dba6ceec1b..ad2daddafd 100644
---- a/nscd/netgroupcache.c
-+++ b/nscd/netgroupcache.c
-@@ -248,7 +248,7 @@ addgetnetgrentX (struct database_dyn *db, int fd, request_header *req,
- : NULL);
- ndomain = (ndomain ? newbuf + ndomaindiff
- : NULL);
-- buffer = newbuf;
-+ *tofreep = buffer = newbuf;
- }
-
- nhost = memcpy (buffer + bufused,
-@@ -319,7 +319,7 @@ addgetnetgrentX (struct database_dyn *db, int fd, request_header *req,
- else if (status == NSS_STATUS_TRYAGAIN && e == ERANGE)
- {
- buflen *= 2;
-- buffer = xrealloc (buffer, buflen);
-+ *tofreep = buffer = xrealloc (buffer, buflen);
- }
- else if (status == NSS_STATUS_RETURN
- || status == NSS_STATUS_NOTFOUND
---
-2.27.0
-
diff --git a/poky/meta/recipes-core/glibc/glibc/check-test-wrapper b/poky/meta/recipes-core/glibc/glibc/check-test-wrapper
index f8e04e0..6ec9b9b 100644
--- a/poky/meta/recipes-core/glibc/glibc/check-test-wrapper
+++ b/poky/meta/recipes-core/glibc/glibc/check-test-wrapper
@@ -2,6 +2,7 @@
import sys
import os
import subprocess
+import resource
env = os.environ.copy()
args = sys.argv[1:]
@@ -44,6 +45,14 @@
qemuargs += ["-L", sysroot]
qemuargs += ["-E", "LD_LIBRARY_PATH={}".format(":".join(libpaths))]
command = qemuargs + args
+
+ # We've seen qemu-arm using up all system memory for some glibc
+ # tests e.g. nptl/tst-pthread-timedlock-lockloop
+ # Cap at 8GB since no test should need more than that
+ # (5GB adds 7 failures for qemuarm glibc test run)
+ limit = 8*1024*1024*1024
+ resource.setrlimit(resource.RLIMIT_AS, (limit, limit))
+
elif targettype == "ssh":
host = os.environ.get("SSH_HOST", None)
user = os.environ.get("SSH_HOST_USER", None)
diff --git a/poky/meta/recipes-core/glibc/glibc_2.33.bb b/poky/meta/recipes-core/glibc/glibc_2.33.bb
index 5e0baa5..b70cd09 100644
--- a/poky/meta/recipes-core/glibc/glibc_2.33.bb
+++ b/poky/meta/recipes-core/glibc/glibc_2.33.bb
@@ -1,7 +1,20 @@
require glibc.inc
require glibc-version.inc
-CVE_CHECK_WHITELIST += "CVE-2020-10029"
+CVE_CHECK_WHITELIST += "CVE-2020-10029 CVE-2021-27645"
+
+# glibc https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-1010022
+# glibc https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-1010023
+# glibc https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-1010024
+# Upstream glibc maintainers dispute there is any issue and have no plans to address it further.
+# "this is being treated as a non-security bug and no real threat."
+CVE_CHECK_WHITELIST += "CVE-2019-1010022 CVE-2019-1010023 CVE-2019-1010024"
+
+# glibc https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2019-1010025
+# Allows for ASLR bypass so can bypass some hardening, not an exploit in itself, may allow
+# easier access for another. "ASLR bypass itself is not a vulnerability."
+# Potential patch at https://sourceware.org/bugzilla/show_bug.cgi?id=22853
+CVE_CHECK_WHITELIST += "CVE-2019-1010025"
DEPENDS += "gperf-native bison-native make-native"
@@ -43,11 +56,6 @@
file://0028-readlib-Add-OECORE_KNOWN_INTERPRETER_NAMES-to-known-.patch \
file://0029-wordsize.h-Unify-the-header-between-arm-and-aarch64.patch \
file://0030-powerpc-Do-not-ask-compiler-for-finding-arch.patch \
- file://0031-x86-Require-full-ISA-support-for-x86-64-level-marker.patch \
- file://0032-string-Work-around-GCC-PR-98512-in-rawmemchr.patch \
- file://0033-x86-Handle-_SC_LEVEL1_ICACHE_LINESIZE-BZ-27444.patch \
- file://CVE-2021-27645.patch \
- file://0001-nptl-Remove-private-futex-optimization-BZ-27304.patch \
"
S = "${WORKDIR}/git"
B = "${WORKDIR}/build-${TARGET_SYS}"
@@ -82,6 +90,7 @@
EXTRA_OECONF_append_x86 = " --enable-cet"
EXTRA_OECONF_append_x86-64 = " --enable-cet"
+EXTRA_OECONF_append_aarch64 = " --enable-memory-tagging"
PACKAGECONFIG ??= "nscd"
PACKAGECONFIG[nscd] = "--enable-nscd,--disable-nscd"
diff --git a/poky/meta/recipes-sato/images/core-image-sato-sdk-ptest.bb b/poky/meta/recipes-core/images/core-image-ptest-all.bb
similarity index 85%
rename from poky/meta/recipes-sato/images/core-image-sato-sdk-ptest.bb
rename to poky/meta/recipes-core/images/core-image-ptest-all.bb
index eea89a5..c1d6aa2 100644
--- a/poky/meta/recipes-sato/images/core-image-sato-sdk-ptest.bb
+++ b/poky/meta/recipes-core/images/core-image-ptest-all.bb
@@ -1,15 +1,13 @@
inherit features_check
REQUIRED_DISTRO_FEATURES = "ptest"
-require core-image-sato-sdk.bb
+require core-image-minimal.bb
require conf/distro/include/ptest-packagelists.inc
DESCRIPTION += "Also includes ptest packages."
HOMEPAGE = "https://www.yoctoproject.org/"
-PROVIDES += "core-image-sato-ptest"
-
-# Also include ptests which may not otherwise be included in a sato image
+# Include the full set of ptests
IMAGE_INSTALL += "${PTESTS_FAST} ${PTESTS_SLOW}"
# This image is sufficiently large (~1.8GB) that we need to be careful that it fits in a live
diff --git a/poky/meta/recipes-sato/images/core-image-sato-ptest-fast.bb b/poky/meta/recipes-core/images/core-image-ptest-fast.bb
similarity index 91%
rename from poky/meta/recipes-sato/images/core-image-sato-ptest-fast.bb
rename to poky/meta/recipes-core/images/core-image-ptest-fast.bb
index d37ad00..40df274 100644
--- a/poky/meta/recipes-sato/images/core-image-sato-ptest-fast.bb
+++ b/poky/meta/recipes-core/images/core-image-ptest-fast.bb
@@ -1,9 +1,10 @@
inherit features_check
REQUIRED_DISTRO_FEATURES = "ptest"
-require core-image-sato-sdk.bb
+require core-image-minimal.bb
require conf/distro/include/ptest-packagelists.inc
+# Include only fast (< 30 sec) ptests
IMAGE_INSTALL += "${PTESTS_FAST}"
DESCRIPTION += "Also includes ptest packages with fast execution times to allow for more automated QA."
diff --git a/poky/meta/recipes-core/initrdscripts/initramfs-framework/rootfs b/poky/meta/recipes-core/initrdscripts/initramfs-framework/rootfs
index 10b9583..e0efbe6 100644
--- a/poky/meta/recipes-core/initrdscripts/initramfs-framework/rootfs
+++ b/poky/meta/recipes-core/initrdscripts/initramfs-framework/rootfs
@@ -56,8 +56,8 @@
# It is unlikely to change, but keep trying anyway.
# Perhaps we pick a different device next time.
umount $ROOTFS_DIR
- fi
fi
+ fi
fi
debug "Sleeping for $delay second(s) to wait root to settle..."
sleep $delay
diff --git a/poky/meta/recipes-core/libxcrypt/files/fix_cflags_handling.patch b/poky/meta/recipes-core/libxcrypt/files/fix_cflags_handling.patch
index 5448fe0..0772998 100644
--- a/poky/meta/recipes-core/libxcrypt/files/fix_cflags_handling.patch
+++ b/poky/meta/recipes-core/libxcrypt/files/fix_cflags_handling.patch
@@ -1,3 +1,8 @@
+From fd9a46695594c3cd836ecb7d959f03f605e69a2f Mon Sep 17 00:00:00 2001
+From: Richard Purdie <richard.purdie@linuxfoundation.org>
+Date: Fri, 30 Apr 2021 10:35:02 +0100
+Subject: [PATCH] libxcrypt: Update to 4.4.19 release and fix symbol version
+
If you pass CFLAGS with a leading space, " " gets passed to popen and convinces
gcc to try and open a file called " ". This results in a confusing error message
like:
@@ -9,8 +14,12 @@
Upstream-Status: Submitted [https://github.com/besser82/libxcrypt/pull/126]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-Index: a/build-aux/compute-symver-floor
-===================================================================
+---
+ build-aux/compute-symver-floor | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/build-aux/compute-symver-floor b/build-aux/compute-symver-floor
+index 4ec82e1..8117342 100644
--- a/build-aux/compute-symver-floor
+++ b/build-aux/compute-symver-floor
@@ -36,6 +36,8 @@ sub preprocessor_check {
@@ -20,5 +29,5 @@
+ # Remove empty elements, particularly leading ones which cause issues with popen below
+ @CFLAGS = grep {$_} @CFLAGS;
- # We call ensure_C_locale here, not from the main section,
- # because this sub might not get called at all, in which
+ # Remove empty elements, particularly leading ones which
+ # cause issues with popen below.
diff --git a/poky/meta/recipes-core/libxcrypt/libxcrypt-compat_4.4.19.bb b/poky/meta/recipes-core/libxcrypt/libxcrypt-compat_4.4.22.bb
similarity index 100%
rename from poky/meta/recipes-core/libxcrypt/libxcrypt-compat_4.4.19.bb
rename to poky/meta/recipes-core/libxcrypt/libxcrypt-compat_4.4.22.bb
diff --git a/poky/meta/recipes-core/libxcrypt/libxcrypt.inc b/poky/meta/recipes-core/libxcrypt/libxcrypt.inc
index 694e555..e4505a6 100644
--- a/poky/meta/recipes-core/libxcrypt/libxcrypt.inc
+++ b/poky/meta/recipes-core/libxcrypt/libxcrypt.inc
@@ -10,7 +10,7 @@
inherit autotools pkgconfig
SRC_URI = "git://github.com/besser82/libxcrypt.git;branch=${SRCBRANCH}"
-SRCREV = "c79119414d7e30017d7b49566e7e4ea35112bdc8"
+SRCREV = "3df9620d08db207367c0c5152148665b5ce422e1"
SRCBRANCH ?= "develop"
SRC_URI += "file://fix_cflags_handling.patch"
diff --git a/poky/meta/recipes-core/libxcrypt/libxcrypt_4.4.19.bb b/poky/meta/recipes-core/libxcrypt/libxcrypt_4.4.22.bb
similarity index 100%
rename from poky/meta/recipes-core/libxcrypt/libxcrypt_4.4.19.bb
rename to poky/meta/recipes-core/libxcrypt/libxcrypt_4.4.22.bb
diff --git a/poky/meta/recipes-core/libxml/libxml2/0001-Make-ptest-run-the-python-tests-if-python-is-enabled.patch b/poky/meta/recipes-core/libxml/libxml2/0001-Make-ptest-run-the-python-tests-if-python-is-enabled.patch
index 5e9a0a5..6d9ede6 100644
--- a/poky/meta/recipes-core/libxml/libxml2/0001-Make-ptest-run-the-python-tests-if-python-is-enabled.patch
+++ b/poky/meta/recipes-core/libxml/libxml2/0001-Make-ptest-run-the-python-tests-if-python-is-enabled.patch
@@ -1,4 +1,4 @@
-From 2b5fb416aa275fd2a17a0139a2f783998bcb42cc Mon Sep 17 00:00:00 2001
+From ea1993d1d9a18c5e61b9cb271892b0a48f508d32 Mon Sep 17 00:00:00 2001
From: Peter Kjellerstedt <pkj@axis.com>
Date: Fri, 9 Jun 2017 17:50:46 +0200
Subject: [PATCH] Make ptest run the python tests if python is enabled
@@ -8,16 +8,14 @@
Upstream-Status: Inappropriate [OE specific]
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
-
---
- Makefile.am | 2 +-
- python/Makefile.am | 9 +++++++++
- python/tests/Makefile.am | 10 ++++++++++
- python/tests/tstLastError.py | 2 +-
- 4 files changed, 21 insertions(+), 2 deletions(-)
+ Makefile.am | 2 +-
+ python/Makefile.am | 9 +++++++++
+ python/tests/Makefile.am | 10 ++++++++++
+ 3 files changed, 20 insertions(+), 1 deletion(-)
diff --git a/Makefile.am b/Makefile.am
-index ae62274..bd1e425 100644
+index b428452b..dc18d6dd 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -203,9 +203,9 @@ install-ptest:
@@ -32,7 +30,7 @@
runtests: runtest$(EXEEXT) testrecurse$(EXEEXT) testapi$(EXEEXT) \
testchar$(EXEEXT) testdict$(EXEEXT) runxmlconf$(EXEEXT)
diff --git a/python/Makefile.am b/python/Makefile.am
-index 34aed96..ba3ec6a 100644
+index 34aed96c..ba3ec6a4 100644
--- a/python/Makefile.am
+++ b/python/Makefile.am
@@ -48,7 +48,16 @@ GENERATED = libxml2class.py libxml2class.txt $(BUILT_SOURCES)
@@ -53,7 +51,7 @@
tests test: all
cd tests && $(MAKE) tests
diff --git a/python/tests/Makefile.am b/python/tests/Makefile.am
-index 227e24d..021bb29 100644
+index 227e24df..3568c2d2 100644
--- a/python/tests/Makefile.am
+++ b/python/tests/Makefile.am
@@ -59,6 +59,11 @@ XMLS= \
@@ -83,16 +81,6 @@
+
tests:
endif
-diff --git a/python/tests/tstLastError.py b/python/tests/tstLastError.py
-index 81d0acc..162c8db 100755
---- a/python/tests/tstLastError.py
-+++ b/python/tests/tstLastError.py
-@@ -25,7 +25,7 @@ class TestCase(unittest.TestCase):
- when the exception is raised, check the libxml2.lastError for
- expected values."""
- # disable the default error handler
-- libxml2.registerErrorHandler(None,None)
-+ libxml2.registerErrorHandler(lambda ctx,str: None,None)
- try:
- f(*args)
- except exc:
+--
+2.25.1
+
diff --git a/poky/meta/recipes-core/libxml/libxml2/CVE-2019-20388.patch b/poky/meta/recipes-core/libxml/libxml2/CVE-2019-20388.patch
deleted file mode 100644
index 88eb65a..0000000
--- a/poky/meta/recipes-core/libxml/libxml2/CVE-2019-20388.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 7ffcd44d7e6c46704f8af0321d9314cd26e0e18a Mon Sep 17 00:00:00 2001
-From: Zhipeng Xie <xiezhipeng1@huawei.com>
-Date: Tue, 20 Aug 2019 16:33:06 +0800
-Subject: [PATCH] Fix memory leak in xmlSchemaValidateStream
-
-When ctxt->schema is NULL, xmlSchemaSAXPlug->xmlSchemaPreRun
-alloc a new schema for ctxt->schema and set vctxt->xsiAssemble
-to 1. Then xmlSchemaVStart->xmlSchemaPreRun initialize
-vctxt->xsiAssemble to 0 again which cause the alloced schema
-can not be freed anymore.
-
-Found with libFuzzer.
-
-Upstream-Status: Backport [https://gitlab.gnome.org/GNOME/libxml2/commit/7ffcd44d7e6c46704f8af0321d9314cd26e0e18a]
-CVE: CVE-2019-20388
-
-Signed-off-by: Zhipeng Xie <xiezhipeng1@huawei.com>
-Signed-off-by: Lee Chee Yang <chee.yang.lee@intel.com>
----
- xmlschemas.c | 1 -
- 1 file changed, 1 deletion(-)
-
-diff --git a/xmlschemas.c b/xmlschemas.c
-index 301c8449..39d92182 100644
---- a/xmlschemas.c
-+++ b/xmlschemas.c
-@@ -28090,7 +28090,6 @@ xmlSchemaPreRun(xmlSchemaValidCtxtPtr vctxt) {
- vctxt->nberrors = 0;
- vctxt->depth = -1;
- vctxt->skipDepth = -1;
-- vctxt->xsiAssemble = 0;
- vctxt->hasKeyrefs = 0;
- #ifdef ENABLE_IDC_NODE_TABLES_TEST
- vctxt->createIDCNodeTables = 1;
---
-2.24.1
-
diff --git a/poky/meta/recipes-core/libxml/libxml2/CVE-2020-24977.patch b/poky/meta/recipes-core/libxml/libxml2/CVE-2020-24977.patch
deleted file mode 100644
index 8224346..0000000
--- a/poky/meta/recipes-core/libxml/libxml2/CVE-2020-24977.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 50f06b3efb638efb0abd95dc62dca05ae67882c2 Mon Sep 17 00:00:00 2001
-From: Nick Wellnhofer <wellnhofer@aevum.de>
-Date: Fri, 7 Aug 2020 21:54:27 +0200
-Subject: [PATCH] Fix out-of-bounds read with 'xmllint --htmlout'
-
-Make sure that truncated UTF-8 sequences don't cause an out-of-bounds
-array access.
-
-Thanks to @SuhwanSong and the Agency for Defense Development (ADD) for
-the report.
-
-Fixes #178.
-
-CVE: CVE-2020-24977
-Upstream-Status: Backport [https://gitlab.gnome.org/GNOME/libxml2/-/commit/50f06b3efb638efb0abd95dc62dca05ae67882c2]
-
-Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
----
- xmllint.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
-diff --git a/xmllint.c b/xmllint.c
-index f6a8e463..c647486f 100644
---- a/xmllint.c
-+++ b/xmllint.c
-@@ -528,6 +528,12 @@ static void
- xmlHTMLEncodeSend(void) {
- char *result;
-
-+ /*
-+ * xmlEncodeEntitiesReentrant assumes valid UTF-8, but the buffer might
-+ * end with a truncated UTF-8 sequence. This is a hack to at least avoid
-+ * an out-of-bounds read.
-+ */
-+ memset(&buffer[sizeof(buffer)-4], 0, 4);
- result = (char *) xmlEncodeEntitiesReentrant(NULL, BAD_CAST buffer);
- if (result) {
- xmlGenericError(xmlGenericErrorContext, "%s", result);
---
-2.17.1
-
diff --git a/poky/meta/recipes-core/libxml/libxml2/CVE-2020-7595.patch b/poky/meta/recipes-core/libxml/libxml2/CVE-2020-7595.patch
deleted file mode 100644
index facfefd..0000000
--- a/poky/meta/recipes-core/libxml/libxml2/CVE-2020-7595.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 0e1a49c8907645d2e155f0d89d4d9895ac5112b5 Mon Sep 17 00:00:00 2001
-From: Zhipeng Xie <xiezhipeng1@huawei.com>
-Date: Thu, 12 Dec 2019 17:30:55 +0800
-Subject: [PATCH] Fix infinite loop in xmlStringLenDecodeEntities
-
-When ctxt->instate == XML_PARSER_EOF,xmlParseStringEntityRef
-return NULL which cause a infinite loop in xmlStringLenDecodeEntities
-
-Found with libFuzzer.
-
-Signed-off-by: Zhipeng Xie <xiezhipeng1@huawei.com>
-
-Upstream-Status: Backport [https://gitlab.gnome.org/GNOME/libxml2/commit/0e1a49c89076]
-CVE: CVE-2020-7595
-Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
----
- parser.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
-diff --git a/parser.c b/parser.c
-index d1c31963..a34bb6cd 100644
---- a/parser.c
-+++ b/parser.c
-@@ -2646,7 +2646,8 @@ xmlStringLenDecodeEntities(xmlParserCtxtPtr ctxt, const xmlChar *str, int len,
- else
- c = 0;
- while ((c != 0) && (c != end) && /* non input consuming loop */
-- (c != end2) && (c != end3)) {
-+ (c != end2) && (c != end3) &&
-+ (ctxt->instate != XML_PARSER_EOF)) {
-
- if (c == 0) break;
- if ((c == '&') && (str[1] == '#')) {
---
-2.24.1
-
diff --git a/poky/meta/recipes-core/libxml/libxml2/fix-python39.patch b/poky/meta/recipes-core/libxml/libxml2/fix-python39.patch
deleted file mode 100644
index 32590f9..0000000
--- a/poky/meta/recipes-core/libxml/libxml2/fix-python39.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-From e4fb36841800038c289997432ca547c9bfef9db1 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Miro=20Hron=C4=8Dok?= <miro@hroncok.cz>
-Date: Fri, 28 Feb 2020 12:48:14 +0100
-Subject: [PATCH] Parenthesize Py<type>_Check() in ifs
-
-In C, if expressions should be parenthesized.
-PyLong_Check, PyUnicode_Check etc. happened to expand to a parenthesized
-expression before, but that's not API to rely on.
-
-Since Python 3.9.0a4 it needs to be parenthesized explicitly.
-
-Fixes https://gitlab.gnome.org/GNOME/libxml2/issues/149
-Upstream-Status: Backport
-Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
----
- python/libxml.c | 4 ++--
- python/types.c | 12 ++++++------
- 2 files changed, 8 insertions(+), 8 deletions(-)
-
-diff --git a/python/libxml.c b/python/libxml.c
-index bc676c4e0..81e709f34 100644
---- a/python/libxml.c
-+++ b/python/libxml.c
-@@ -294,7 +294,7 @@ xmlPythonFileReadRaw (void * context, char * buffer, int len) {
- lenread = PyBytes_Size(ret);
- data = PyBytes_AsString(ret);
- #ifdef PyUnicode_Check
-- } else if PyUnicode_Check (ret) {
-+ } else if (PyUnicode_Check (ret)) {
- #if PY_VERSION_HEX >= 0x03030000
- Py_ssize_t size;
- const char *tmp;
-@@ -359,7 +359,7 @@ xmlPythonFileRead (void * context, char * buffer, int len) {
- lenread = PyBytes_Size(ret);
- data = PyBytes_AsString(ret);
- #ifdef PyUnicode_Check
-- } else if PyUnicode_Check (ret) {
-+ } else if (PyUnicode_Check (ret)) {
- #if PY_VERSION_HEX >= 0x03030000
- Py_ssize_t size;
- const char *tmp;
-diff --git a/python/types.c b/python/types.c
-index c2bafeb19..ed284ec74 100644
---- a/python/types.c
-+++ b/python/types.c
-@@ -602,16 +602,16 @@ libxml_xmlXPathObjectPtrConvert(PyObject *obj)
- if (obj == NULL) {
- return (NULL);
- }
-- if PyFloat_Check (obj) {
-+ if (PyFloat_Check (obj)) {
- ret = xmlXPathNewFloat((double) PyFloat_AS_DOUBLE(obj));
-- } else if PyLong_Check(obj) {
-+ } else if (PyLong_Check(obj)) {
- #ifdef PyLong_AS_LONG
- ret = xmlXPathNewFloat((double) PyLong_AS_LONG(obj));
- #else
- ret = xmlXPathNewFloat((double) PyInt_AS_LONG(obj));
- #endif
- #ifdef PyBool_Check
-- } else if PyBool_Check (obj) {
-+ } else if (PyBool_Check (obj)) {
-
- if (obj == Py_True) {
- ret = xmlXPathNewBoolean(1);
-@@ -620,14 +620,14 @@ libxml_xmlXPathObjectPtrConvert(PyObject *obj)
- ret = xmlXPathNewBoolean(0);
- }
- #endif
-- } else if PyBytes_Check (obj) {
-+ } else if (PyBytes_Check (obj)) {
- xmlChar *str;
-
- str = xmlStrndup((const xmlChar *) PyBytes_AS_STRING(obj),
- PyBytes_GET_SIZE(obj));
- ret = xmlXPathWrapString(str);
- #ifdef PyUnicode_Check
-- } else if PyUnicode_Check (obj) {
-+ } else if (PyUnicode_Check (obj)) {
- #if PY_VERSION_HEX >= 0x03030000
- xmlChar *str;
- const char *tmp;
-@@ -650,7 +650,7 @@ libxml_xmlXPathObjectPtrConvert(PyObject *obj)
- ret = xmlXPathWrapString(str);
- #endif
- #endif
-- } else if PyList_Check (obj) {
-+ } else if (PyList_Check (obj)) {
- int i;
- PyObject *node;
- xmlNodePtr cur;
---
-GitLab
-
diff --git a/poky/meta/recipes-core/libxml/libxml2/libxml-m4-use-pkgconfig.patch b/poky/meta/recipes-core/libxml/libxml2/libxml-m4-use-pkgconfig.patch
index e6998f6..90fa193 100644
--- a/poky/meta/recipes-core/libxml/libxml2/libxml-m4-use-pkgconfig.patch
+++ b/poky/meta/recipes-core/libxml/libxml2/libxml-m4-use-pkgconfig.patch
@@ -1,7 +1,8 @@
-From 43edc9a445ed66cceb7533eadeef242940b4592c Mon Sep 17 00:00:00 2001
-From: Hongxu Jia <hongxu.jia@windriver.com>
-Date: Sat, 11 May 2019 20:37:12 +0800
+From f57da62218cf72c1342da82abafdac6b0a2e4997 Mon Sep 17 00:00:00 2001
+From: Tony Tascioglu <tony.tascioglu@windriver.com>
+Date: Fri, 14 May 2021 11:50:35 -0400
Subject: [PATCH] AM_PATH_XML2 uses xml-config which we disable through
+
binconfig-disabled.bbclass, so port it to use pkg-config instead.
Upstream-Status: Pending
@@ -9,16 +10,22 @@
Rebase to 2.9.9
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
+
+Updated to apply cleanly to v2.9.12
+
+Signed-off-by: Tony Tascioglu <tony.tascioglu@windriver.com>
---
- libxml.m4 | 186 ++------------------------------------------------------------
- 1 file changed, 5 insertions(+), 181 deletions(-)
+ libxml.m4 | 190 ++----------------------------------------------------
+ 1 file changed, 5 insertions(+), 185 deletions(-)
diff --git a/libxml.m4 b/libxml.m4
-index 2d7a6f5..1c53585 100644
+index 09de9fe2..1c535853 100644
--- a/libxml.m4
+++ b/libxml.m4
-@@ -1,188 +1,12 @@
+@@ -1,192 +1,12 @@
-# Configure paths for LIBXML2
+-# Simon Josefsson 2020-02-12
+-# Fix autoconf 2.70+ warnings
-# Mike Hommey 2004-06-19
-# use CPPFLAGS instead of CFLAGS
-# Toshio Kuratomi 2001-04-21
@@ -78,7 +85,8 @@
-dnl (Also sanity checks the results of xml2-config to some extent)
-dnl
- rm -f conf.xmltest
-- AC_TRY_RUN([
+- AC_RUN_IFELSE(
+- [AC_LANG_SOURCE([[
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
@@ -148,12 +156,12 @@
- printf("*** being found. The easiest way to fix this is to remove the old version\n");
- printf("*** of LIBXML, but you can also set the XML2_CONFIG environment to point to the\n");
- printf("*** correct copy of xml2-config. (In this case, you will have to\n");
-- printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
+- printf("*** modify your LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf\n");
- printf("*** so that the correct libraries are found at run-time))\n");
- }
- return 1;
-}
--],, no_xml=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
+-]])],, no_xml=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
- CPPFLAGS="$ac_save_CPPFLAGS"
- LIBS="$ac_save_LIBS"
- fi
@@ -178,10 +186,11 @@
- echo "*** Could not run libxml test program, checking why..."
- CPPFLAGS="$CPPFLAGS $XML_CPPFLAGS"
- LIBS="$LIBS $XML_LIBS"
-- AC_TRY_LINK([
+- AC_LINK_IFELSE(
+- [AC_LANG_PROGRAM([[
-#include <libxml/xmlversion.h>
-#include <stdio.h>
--], [ LIBXML_TEST_VERSION; return 0;],
+-]], [[ LIBXML_TEST_VERSION; return 0;]])],
- [ echo "*** The test program compiled, but did not run. This usually means"
- echo "*** that the run-time linker is not finding LIBXML or finding the wrong"
- echo "*** version of LIBXML. If it is not finding LIBXML, you'll need to set your"
diff --git a/poky/meta/recipes-core/libxml/libxml2/remove-fuzz-from-ptests.patch b/poky/meta/recipes-core/libxml/libxml2/remove-fuzz-from-ptests.patch
new file mode 100644
index 0000000..e80c460
--- /dev/null
+++ b/poky/meta/recipes-core/libxml/libxml2/remove-fuzz-from-ptests.patch
@@ -0,0 +1,43 @@
+From e49a0d4a8f3f725d6f683854e1cad36a3cd02962 Mon Sep 17 00:00:00 2001
+From: Tony Tascioglu <tony.tascioglu@windriver.com>
+Date: Wed, 19 May 2021 19:43:56 -0400
+Subject: [PATCH] Remove fuzz testing from executing with ptests.
+
+Upstream version 2.9.12 introduced new fuzz-testing and a corresponding
+folder fuzz. These tests are not required for ptests of this package.
+
+This patch removes the fuzz testing targets from the Makefile.
+Otherwise, running the ptests will fail due to the invalid directory.
+
+Signed-off-by: Tony Tascioglu <tony.tascioglu@windriver.com>
+---
+ Makefile.am | 5 ++---
+ 1 file changed, 2 insertions(+), 3 deletions(-)
+
+diff --git a/Makefile.am b/Makefile.am
+index a9284b95..3d7b344d 100644
+--- a/Makefile.am
++++ b/Makefile.am
+@@ -2,9 +2,9 @@
+
+ ACLOCAL_AMFLAGS = -I m4
+
+-SUBDIRS = include . doc example fuzz xstc $(PYTHON_SUBDIR)
++SUBDIRS = include . doc example xstc $(PYTHON_SUBDIR)
+
+-DIST_SUBDIRS = include . doc example fuzz python xstc
++DIST_SUBDIRS = include . doc example python xstc
+
+ AM_CPPFLAGS = -I$(top_builddir)/include -I$(srcdir)/include
+
+@@ -210,7 +210,6 @@ runtests: runtest$(EXEEXT) testrecurse$(EXEEXT) testapi$(EXEEXT) \
+ $(CHECKER) ./runxmlconf$(EXEEXT)
+ @(if [ "$(PYTHON_SUBDIR)" != "" ] ; then cd python ; \
+ $(MAKE) tests ; fi)
+- @cd fuzz; $(MAKE) tests
+
+ check: all runtests
+
+--
+2.25.1
+
diff --git a/poky/meta/recipes-core/libxml/libxml2/runtest.patch b/poky/meta/recipes-core/libxml/libxml2/runtest.patch
index 0dbb353..c7a90cd 100644
--- a/poky/meta/recipes-core/libxml/libxml2/runtest.patch
+++ b/poky/meta/recipes-core/libxml/libxml2/runtest.patch
@@ -1,28 +1,33 @@
-Add 'install-ptest' rule. Print a standard result line for
-each test.
+From 6172ccd1e74bc181f5298f19e240234e12876abe Mon Sep 17 00:00:00 2001
+From: Tony Tascioglu <tony.tascioglu@windriver.com>
+Date: Tue, 11 May 2021 11:57:46 -0400
+Subject: [PATCH] Add 'install-ptest' rule.
+
+Print a standard result line for each test.
Signed-off-by: Mihaela Sendrea <mihaela.sendrea@enea.com>
Signed-off-by: Andrej Valek <andrej.valek@siemens.com>
-Upstream-Status: Backport
+Upstream-Status: Pending
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
+Signed-off-by: Tony Tascioglu <tony.tascioglu@windriver.com>
---
- Makefile.am | 9 ++++
+ Makefile.am | 9 +++
runsuite.c | 1 +
runtest.c | 2 +
runxmlconf.c | 1 +
- testapi.c | 122 ++++++++++++++++++++++++++++++---------------
- testchar.c | 156 +++++++++++++++++++++++++++++++++++++++++-----------------
+ testapi.c | 122 ++++++++++++++++++++++++++-------------
+ testchar.c | 156 +++++++++++++++++++++++++++++++++++---------------
testdict.c | 1 +
testlimits.c | 1 +
testrecurse.c | 2 +
9 files changed, 210 insertions(+), 85 deletions(-)
diff --git a/Makefile.am b/Makefile.am
-index 9c630be..7cfd04b 100644
+index 05d1671f..ae622745 100644
--- a/Makefile.am
+++ b/Makefile.am
-@@ -202,6 +202,15 @@ runxmlconf_LDADD= $(LDADDS)
+@@ -198,6 +198,15 @@ runxmlconf_LDADD= $(LDADDS)
#testOOM_DEPENDENCIES = $(DEPS)
#testOOM_LDADD= $(LDADDS)
@@ -39,10 +44,10 @@
testchar$(EXEEXT) testdict$(EXEEXT) runxmlconf$(EXEEXT)
[ -d test ] || $(LN_S) $(srcdir)/test .
diff --git a/runsuite.c b/runsuite.c
-index aaab13e..9ba2c5d 100644
+index d24b5ec3..f7ff2521 100644
--- a/runsuite.c
+++ b/runsuite.c
-@@ -1162,6 +1162,7 @@ main(int argc ATTRIBUTE_UNUSED, char **argv ATTRIBUTE_UNUSED) {
+@@ -1147,6 +1147,7 @@ main(int argc ATTRIBUTE_UNUSED, char **argv ATTRIBUTE_UNUSED) {
if (logfile != NULL)
fclose(logfile);
@@ -51,10 +56,10 @@
}
#else /* !SCHEMAS */
diff --git a/runtest.c b/runtest.c
-index addda5c..8ba5d59 100644
+index ffa98d04..470f95cb 100644
--- a/runtest.c
+++ b/runtest.c
-@@ -4501,6 +4501,7 @@ launchTests(testDescPtr tst) {
+@@ -4508,6 +4508,7 @@ launchTests(testDescPtr tst) {
xmlCharEncCloseFunc(ebcdicHandler);
xmlCharEncCloseFunc(eucJpHandler);
@@ -62,7 +67,7 @@
return(err);
}
-@@ -4577,6 +4578,7 @@ main(int argc ATTRIBUTE_UNUSED, char **argv ATTRIBUTE_UNUSED) {
+@@ -4588,6 +4589,7 @@ main(int argc ATTRIBUTE_UNUSED, char **argv ATTRIBUTE_UNUSED) {
xmlCleanupParser();
xmlMemoryDump();
@@ -71,7 +76,7 @@
}
diff --git a/runxmlconf.c b/runxmlconf.c
-index cef20f4..4f291fb 100644
+index 70f61017..e882b3a1 100644
--- a/runxmlconf.c
+++ b/runxmlconf.c
@@ -595,6 +595,7 @@ main(int argc ATTRIBUTE_UNUSED, char **argv ATTRIBUTE_UNUSED) {
@@ -83,7 +88,7 @@
}
diff --git a/testapi.c b/testapi.c
-index 4a751e2..7ccc066 100644
+index ff8b470d..52b51d78 100644
--- a/testapi.c
+++ b/testapi.c
@@ -1246,49 +1246,91 @@ static int
@@ -219,7 +224,7 @@
}
diff --git a/testchar.c b/testchar.c
-index 0d08792..f555d3b 100644
+index 6866a175..7bce0132 100644
--- a/testchar.c
+++ b/testchar.c
@@ -23,7 +23,7 @@ static void errorHandler(void *unused, xmlErrorPtr err) {
@@ -797,7 +802,7 @@
/*
* Cleanup function for the XML library.
diff --git a/testdict.c b/testdict.c
-index 40bebd0..114b934 100644
+index 40bebd05..114b9347 100644
--- a/testdict.c
+++ b/testdict.c
@@ -440,5 +440,6 @@ int main(void)
@@ -808,7 +813,7 @@
return(ret);
}
diff --git a/testlimits.c b/testlimits.c
-index 68c94db..1584434 100644
+index 059116a6..f0bee68d 100644
--- a/testlimits.c
+++ b/testlimits.c
@@ -1634,5 +1634,6 @@ main(int argc ATTRIBUTE_UNUSED, char **argv ATTRIBUTE_UNUSED) {
@@ -819,7 +824,7 @@
return(ret);
}
diff --git a/testrecurse.c b/testrecurse.c
-index f95ae1c..74c8f8b 100644
+index 0cbe25a6..3ecadb40 100644
--- a/testrecurse.c
+++ b/testrecurse.c
@@ -892,6 +892,7 @@ launchTests(testDescPtr tst) {
@@ -838,5 +843,5 @@
return(ret);
}
--
-2.7.4
+2.25.1
diff --git a/poky/meta/recipes-core/libxml/libxml2_2.9.10.bb b/poky/meta/recipes-core/libxml/libxml2_2.9.12.bb
similarity index 82%
rename from poky/meta/recipes-core/libxml/libxml2_2.9.10.bb
rename to poky/meta/recipes-core/libxml/libxml2_2.9.12.bb
index 07ae686..955d934 100644
--- a/poky/meta/recipes-core/libxml/libxml2_2.9.10.bb
+++ b/poky/meta/recipes-core/libxml/libxml2_2.9.12.bb
@@ -5,9 +5,9 @@
SECTION = "libs"
LICENSE = "MIT"
LIC_FILES_CHKSUM = "file://Copyright;md5=2044417e2e5006b65a8b9067b683fcf1 \
- file://hash.c;beginline=6;endline=15;md5=96f7296605eae807670fb08947829969 \
- file://list.c;beginline=4;endline=13;md5=cdbfa3dee51c099edb04e39f762ee907 \
- file://trio.c;beginline=5;endline=14;md5=6c025753c86d958722ec76e94cae932e"
+ file://hash.c;beginline=6;endline=15;md5=e77f77b12cb69e203d8b4090a0eee879 \
+ file://list.c;beginline=4;endline=13;md5=b9c25b021ccaf287e50060602d20f3a7 \
+ file://trio.c;beginline=5;endline=14;md5=cd4f61e27f88c1d43df112966b1cd28f"
DEPENDS = "zlib virtual/libiconv"
@@ -20,15 +20,10 @@
file://libxml-m4-use-pkgconfig.patch \
file://0001-Make-ptest-run-the-python-tests-if-python-is-enabled.patch \
file://fix-execution-of-ptests.patch \
- file://CVE-2020-7595.patch \
- file://CVE-2019-20388.patch \
- file://CVE-2020-24977.patch \
- file://fix-python39.patch \
+ file://remove-fuzz-from-ptests.patch \
"
-SRC_URI[libtar.md5sum] = "10942a1dc23137a8aa07f0639cbfece5"
-SRC_URI[libtar.sha256sum] = "aafee193ffb8fe0c82d4afef6ef91972cbaf5feea100edc2f262750611b4be1f"
-SRC_URI[testtar.md5sum] = "ae3d1ebe000a3972afa104ca7f0e1b4a"
+SRC_URI[libtar.sha256sum] = "c8d6681e38c56f172892c85ddc0852e1fd4b53b4209e7f4ebf17f7e2eae71d92"
SRC_URI[testtar.sha256sum] = "96151685cec997e1f9f3387e3626d61e6284d4d6e66e0e440c209286c03e9cc7"
BINCONFIG = "${bindir}/xml2-config"
@@ -43,7 +38,7 @@
inherit ${@bb.utils.contains('PACKAGECONFIG', 'python', 'python3native', '', d)}
-RDEPENDS_${PN}-ptest += "make ${@bb.utils.contains('PACKAGECONFIG', 'python', 'libgcc python3-core python3-logging python3-shell python3-stringold python3-threading python3-unittest ${PN}-python', '', d)}"
+RDEPENDS_${PN}-ptest += "bash make ${@bb.utils.contains('PACKAGECONFIG', 'python', 'libgcc python3-core python3-logging python3-shell python3-stringold python3-threading python3-unittest ${PN}-python', '', d)}"
RDEPENDS_${PN}-python += "${@bb.utils.contains('PACKAGECONFIG', 'python', 'python3-core', '', d)}"
diff --git a/poky/meta/recipes-core/musl/libucontext/0001-meson-Add-option-to-pass-cpu.patch b/poky/meta/recipes-core/musl/libucontext/0001-meson-Add-option-to-pass-cpu.patch
new file mode 100644
index 0000000..1fdc9f7
--- /dev/null
+++ b/poky/meta/recipes-core/musl/libucontext/0001-meson-Add-option-to-pass-cpu.patch
@@ -0,0 +1,49 @@
+From a530eed9e7e6872e10fe92efaf1e9739471c30ca Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem@gmail.com>
+Date: Sun, 30 May 2021 08:30:28 -0700
+Subject: [PATCH] meson: Add option to pass cpu
+
+This helps with cross compile setups, where host_cpu != target_cpu
+therefore detecting it on the fly will end up with wrong cpu to build
+for
+
+Upstream-Status: Submitted [https://github.com/kaniini/libucontext/pull/28]
+Signed-off-by: Khem Raj <raj.khem@gmail.com>
+---
+ meson.build | 6 +++++-
+ meson_options.txt | 4 +++-
+ 2 files changed, 8 insertions(+), 2 deletions(-)
+
+diff --git a/meson.build b/meson.build
+index e863780..2b4bdbd 100644
+--- a/meson.build
++++ b/meson.build
+@@ -6,7 +6,11 @@ project(
+ version : run_command('head', files('VERSION')).stdout()
+ )
+
+-cpu = host_machine.cpu_family()
++cpu = get_option('cpu')
++if cpu == ''
++ cpu = host_machine.cpu_family()
++endif
++
+ if cpu == 'sh4'
+ cpu = 'sh'
+ endif
+diff --git a/meson_options.txt b/meson_options.txt
+index d4201d1..864d83c 100644
+--- a/meson_options.txt
++++ b/meson_options.txt
+@@ -1,4 +1,6 @@
+ option('freestanding', type : 'boolean', value : false,
+ description: 'Do not use system headers')
+ option('export_unprefixed', type : 'boolean', value : true,
+- description: 'Export POSIX 2004 ucontext names as alises')
+\ No newline at end of file
++ description: 'Export POSIX 2004 ucontext names as alises')
++option('cpu', type : 'string', value : '',
++ description: 'Target CPU architecture for cross compile')
+--
+2.31.1
+
diff --git a/poky/meta/recipes-core/musl/libucontext_git.bb b/poky/meta/recipes-core/musl/libucontext_git.bb
index 11affeb..d8ae824 100644
--- a/poky/meta/recipes-core/musl/libucontext_git.bb
+++ b/poky/meta/recipes-core/musl/libucontext_git.bb
@@ -8,10 +8,11 @@
SECTION = "libs"
DEPENDS = ""
-PV = "0.10+${SRCPV}"
-SRCREV = "19fa1bbfc26efb92147b5e85cc0ca02a0e837561"
+PV = "1.1+${SRCPV}"
+SRCREV = "335ee864ef6f4a5d4b525453fd9dbfb3507cfecc"
SRC_URI = "git://github.com/kaniini/libucontext \
-"
+ file://0001-meson-Add-option-to-pass-cpu.patch \
+ "
S = "${WORKDIR}/git"
@@ -49,16 +50,5 @@
return a
bb.error("cannot map '%s' to a linux kernel architecture" % a)
-export ARCH = "${@map_kernel_arch(d.getVar('TARGET_ARCH'), d)}"
-
-CFLAGS += "-Iarch/${ARCH} -Iarch/common"
-
-EXTRA_OEMAKE = "CFLAGS='${CFLAGS}' LDFLAGS='${LDFLAGS}' LIBDIR='${base_libdir}'"
-
-do_compile() {
- oe_runmake ARCH=${ARCH}
-}
-
-do_install() {
- oe_runmake ARCH="${ARCH}" DESTDIR="${D}" install
-}
+EXTRA_OEMESON = "-Dcpu=${@map_kernel_arch(d.getVar('TARGET_ARCH'), d)}"
+inherit meson
diff --git a/poky/meta/recipes-core/musl/musl/0001-riscv-Rename-__NR_fstatat-__NR_newfstatat.patch b/poky/meta/recipes-core/musl/musl/0001-riscv-Rename-__NR_fstatat-__NR_newfstatat.patch
new file mode 100644
index 0000000..9d9f16c
--- /dev/null
+++ b/poky/meta/recipes-core/musl/musl/0001-riscv-Rename-__NR_fstatat-__NR_newfstatat.patch
@@ -0,0 +1,32 @@
+From 40732d03990632049d5ba63dd736269a81756b16 Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem@gmail.com>
+Date: Wed, 19 May 2021 00:30:05 -0700
+Subject: [PATCH] riscv: Rename __NR_fstatat __NR_newfstatat
+
+on riscv64 this syscall is called __NR_newfstatat
+this helps the name match kernel UAPI for external
+programs
+
+Upstream-Status: Submitted [https://www.openwall.com/lists/musl/2021/05/19/3]
+Signed-off-by: Khem Raj <raj.khem@gmail.com>
+Cc: zabolcs Nagy <nsz@port70.net>
+---
+ arch/riscv64/bits/syscall.h.in | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/arch/riscv64/bits/syscall.h.in b/arch/riscv64/bits/syscall.h.in
+index f9c421d0..39c0d650 100644
+--- a/arch/riscv64/bits/syscall.h.in
++++ b/arch/riscv64/bits/syscall.h.in
+@@ -76,7 +76,7 @@
+ #define __NR_splice 76
+ #define __NR_tee 77
+ #define __NR_readlinkat 78
+-#define __NR_fstatat 79
++#define __NR_newfstatat 79
+ #define __NR_fstat 80
+ #define __NR_sync 81
+ #define __NR_fsync 82
+--
+2.31.1
+
diff --git a/poky/meta/recipes-core/musl/musl_git.bb b/poky/meta/recipes-core/musl/musl_git.bb
index ef8bc2e..795b888 100644
--- a/poky/meta/recipes-core/musl/musl_git.bb
+++ b/poky/meta/recipes-core/musl/musl_git.bb
@@ -15,6 +15,7 @@
SRC_URI = "git://git.musl-libc.org/musl \
file://0001-Make-dynamic-linker-a-relative-symlink-to-libc.patch \
file://0002-ldso-Use-syslibdir-and-libdir-as-default-pathes-to-l.patch \
+ file://0001-riscv-Rename-__NR_fstatat-__NR_newfstatat.patch \
"
S = "${WORKDIR}/git"
diff --git a/poky/meta/recipes-core/ovmf/ovmf/0001-Fix-VLA-parameter-warning.patch b/poky/meta/recipes-core/ovmf/ovmf/0001-Fix-VLA-parameter-warning.patch
new file mode 100644
index 0000000..d658123
--- /dev/null
+++ b/poky/meta/recipes-core/ovmf/ovmf/0001-Fix-VLA-parameter-warning.patch
@@ -0,0 +1,51 @@
+From 498627ebda6271b59920f43a0b9b6187edeb7b09 Mon Sep 17 00:00:00 2001
+From: Adrian Herrera <adr.her.arc.95@gmail.com>
+Date: Mon, 22 Mar 2021 21:06:47 +0000
+Subject: [PATCH] Fix VLA parameter warning
+
+Make VLA buffer types consistent in declarations and definitions.
+Resolves build crash when using -Werror due to "vla-parameter" warning.
+
+Upstream-Status: Submitted [https://github.com/google/brotli/pull/893]
+Signed-off-by: Adrian Herrera <adr.her.arc.95@gmail.com>
+---
+ c/dec/decode.c | 6 ++++--
+ c/enc/encode.c | 5 +++--
+ 2 files changed, 7 insertions(+), 4 deletions(-)
+
+diff --git a/BaseTools/Source/C/BrotliCompress/brotli/c/dec/decode.c b/BaseTools/Source/C/BrotliCompress/brotli/c/dec/decode.c
+index 114c505..bb6f1ab 100644
+--- a/BaseTools/Source/C/BrotliCompress/brotli/c/dec/decode.c
++++ b/BaseTools/Source/C/BrotliCompress/brotli/c/dec/decode.c
+@@ -2030,8 +2030,10 @@ static BROTLI_NOINLINE BrotliDecoderErrorCode SafeProcessCommands(
+ }
+
+ BrotliDecoderResult BrotliDecoderDecompress(
+- size_t encoded_size, const uint8_t* encoded_buffer, size_t* decoded_size,
+- uint8_t* decoded_buffer) {
++ size_t encoded_size,
++ const uint8_t encoded_buffer[BROTLI_ARRAY_PARAM(encoded_size)],
++ size_t* decoded_size,
++ uint8_t decoded_buffer[BROTLI_ARRAY_PARAM(*decoded_size)]) {
+ BrotliDecoderState s;
+ BrotliDecoderResult result;
+ size_t total_out = 0;
+diff --git a/c/enc/encode.c b/c/enc/encode.c
+index 68548ef..ab0a490 100644
+--- a/BaseTools/Source/C/BrotliCompress/brotli/c/enc/encode.c
++++ c/BaseTools/Source/C/BrotliCompress/brotli/c/enc/encode.c
+@@ -1470,8 +1470,9 @@ static size_t MakeUncompressedStream(
+
+ BROTLI_BOOL BrotliEncoderCompress(
+ int quality, int lgwin, BrotliEncoderMode mode, size_t input_size,
+- const uint8_t* input_buffer, size_t* encoded_size,
+- uint8_t* encoded_buffer) {
++ const uint8_t input_buffer[BROTLI_ARRAY_PARAM(input_size)],
++ size_t* encoded_size,
++ uint8_t encoded_buffer[BROTLI_ARRAY_PARAM(*encoded_size)]) {
+ BrotliEncoderState* s;
+ size_t out_size = *encoded_size;
+ const uint8_t* input_start = input_buffer;
+--
+2.31.1
+
diff --git a/poky/meta/recipes-core/ovmf/ovmf/debug_prefix_map.patch b/poky/meta/recipes-core/ovmf/ovmf/debug_prefix_map.patch
new file mode 100644
index 0000000..0165fae
--- /dev/null
+++ b/poky/meta/recipes-core/ovmf/ovmf/debug_prefix_map.patch
@@ -0,0 +1,93 @@
+We want to pass ${DEBUG_PREFIX_MAP} to gcc commands and also pass in
+ --debug-prefix-map to nasm (we carry a patch to nasm for this). The
+tools definitions file is built by ovmf-native so we need to pass this in
+at target build time when we know the right values so we use the environment.
+
+By using determininistc file paths during the ovmf build, it removes the
+opportunitity for gcc/ld to change the output binaries due to path lengths
+overflowing section sizes and causing small changes in the binary output.
+Previously we relied on the stripped output being the same which isn't always
+the case if the size of the debug symbols varies.
+
+Upstream-Status: Pending [gcc parts may be upstreamable, nasm patch isn't upstream yet]
+Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
+
+
+Index: git/BaseTools/Conf/tools_def.template
+===================================================================
+--- git.orig/BaseTools/Conf/tools_def.template
++++ git/BaseTools/Conf/tools_def.template
+@@ -1918,7 +1918,7 @@ NOOPT_*_*_OBJCOPY_ADDDEBUGFLAG = --a
+ *_*_*_DTCPP_PATH = DEF(DTCPP_BIN)
+ *_*_*_DTC_PATH = DEF(DTC_BIN)
+
+-DEFINE GCC_ALL_CC_FLAGS = -g -Os -fshort-wchar -fno-builtin -fno-strict-aliasing -Wall -Werror -Wno-array-bounds -include AutoGen.h -fno-common
++DEFINE GCC_ALL_CC_FLAGS = -g -Os -fshort-wchar -fno-builtin -fno-strict-aliasing -Wall -Werror -Wno-array-bounds -include AutoGen.h -fno-common ENV(GCC_PREFIX_MAP)
+ DEFINE GCC_IA32_CC_FLAGS = DEF(GCC_ALL_CC_FLAGS) -m32 -malign-double -freorder-blocks -freorder-blocks-and-partition -O2 -mno-stack-arg-probe
+ DEFINE GCC_X64_CC_FLAGS = DEF(GCC_ALL_CC_FLAGS) -mno-red-zone -Wno-address -mno-stack-arg-probe
+ DEFINE GCC_ARM_CC_FLAGS = DEF(GCC_ALL_CC_FLAGS) -mlittle-endian -mabi=aapcs -fno-short-enums -funsigned-char -ffunction-sections -fdata-sections -fomit-frame-pointer -Wno-address -mthumb -mfloat-abi=soft -fno-pic -fno-pie
+@@ -1936,8 +1936,8 @@ DEFINE GCC_IA32_X64_ASLDLINK_FLAGS = -fu
+ DEFINE GCC_ARM_ASLDLINK_FLAGS = DEF(GCC_ARM_DLINK_FLAGS) -Wl,--entry,ReferenceAcpiTable -u $(IMAGE_ENTRY_POINT) DEF(GCC_ARM_AARCH64_ASLDLINK_FLAGS)
+ DEFINE GCC_AARCH64_ASLDLINK_FLAGS = DEF(GCC_AARCH64_DLINK_FLAGS) -Wl,--entry,ReferenceAcpiTable -u $(IMAGE_ENTRY_POINT) DEF(GCC_ARM_AARCH64_ASLDLINK_FLAGS)
+ DEFINE GCC_IA32_X64_DLINK_FLAGS = DEF(GCC_IA32_X64_DLINK_COMMON) --entry _$(IMAGE_ENTRY_POINT) --file-alignment 0x20 --section-alignment 0x20 -Map $(DEST_DIR_DEBUG)/$(BASE_NAME).map
+-DEFINE GCC_ASM_FLAGS = -c -x assembler -imacros AutoGen.h
+-DEFINE GCC_PP_FLAGS = -E -x assembler-with-cpp -include AutoGen.h
++DEFINE GCC_ASM_FLAGS = -c -x assembler -imacros AutoGen.h ENV(GCC_PREFIX_MAP)
++DEFINE GCC_PP_FLAGS = -E -x assembler-with-cpp -include AutoGen.h ENV(GCC_PREFIX_MAP)
+ DEFINE GCC_VFRPP_FLAGS = -x c -E -P -DVFRCOMPILE --include $(MODULE_NAME)StrDefs.h
+ DEFINE GCC_ASLPP_FLAGS = -x c -E -include AutoGen.h
+ DEFINE GCC_ASLCC_FLAGS = -x c
+@@ -2082,7 +2082,7 @@ DEFINE GCC_PP_FLAGS
+ *_GCC48_IA32_DLINK2_FLAGS = DEF(GCC48_IA32_DLINK2_FLAGS)
+ *_GCC48_IA32_RC_FLAGS = DEF(GCC_IA32_RC_FLAGS)
+ *_GCC48_IA32_OBJCOPY_FLAGS =
+-*_GCC48_IA32_NASM_FLAGS = -f elf32
++*_GCC48_IA32_NASM_FLAGS = -f elf32 ENV(NASM_PREFIX_MAP)
+
+ DEBUG_GCC48_IA32_CC_FLAGS = DEF(GCC48_IA32_CC_FLAGS) -Os
+ RELEASE_GCC48_IA32_CC_FLAGS = DEF(GCC48_IA32_CC_FLAGS) -Os -Wno-unused-but-set-variable
+@@ -2110,7 +2110,7 @@ RELEASE_GCC48_IA32_CC_FLAGS = DEF(
+ *_GCC48_X64_DLINK2_FLAGS = DEF(GCC48_X64_DLINK2_FLAGS)
+ *_GCC48_X64_RC_FLAGS = DEF(GCC_X64_RC_FLAGS)
+ *_GCC48_X64_OBJCOPY_FLAGS =
+-*_GCC48_X64_NASM_FLAGS = -f elf64
++*_GCC48_X64_NASM_FLAGS = -f elf64 ENV(NASM_PREFIX_MAP)
+
+ DEBUG_GCC48_X64_CC_FLAGS = DEF(GCC48_X64_CC_FLAGS) -Os
+ RELEASE_GCC48_X64_CC_FLAGS = DEF(GCC48_X64_CC_FLAGS) -Os -Wno-unused-but-set-variable
+@@ -2222,7 +2222,7 @@ RELEASE_GCC48_AARCH64_CC_FLAGS = DEF(G
+ *_GCC49_IA32_DLINK2_FLAGS = DEF(GCC49_IA32_DLINK2_FLAGS)
+ *_GCC49_IA32_RC_FLAGS = DEF(GCC_IA32_RC_FLAGS)
+ *_GCC49_IA32_OBJCOPY_FLAGS =
+-*_GCC49_IA32_NASM_FLAGS = -f elf32
++*_GCC49_IA32_NASM_FLAGS = -f elf32 ENV(NASM_PREFIX_MAP)
+
+ DEBUG_GCC49_IA32_CC_FLAGS = DEF(GCC49_IA32_CC_FLAGS) -Os
+ RELEASE_GCC49_IA32_CC_FLAGS = DEF(GCC49_IA32_CC_FLAGS) -Os -Wno-unused-but-set-variable -Wno-unused-const-variable
+@@ -2250,7 +2250,7 @@ RELEASE_GCC49_IA32_CC_FLAGS = DEF(
+ *_GCC49_X64_DLINK2_FLAGS = DEF(GCC49_X64_DLINK2_FLAGS)
+ *_GCC49_X64_RC_FLAGS = DEF(GCC_X64_RC_FLAGS)
+ *_GCC49_X64_OBJCOPY_FLAGS =
+-*_GCC49_X64_NASM_FLAGS = -f elf64
++*_GCC49_X64_NASM_FLAGS = -f elf64 ENV(NASM_PREFIX_MAP)
+
+ DEBUG_GCC49_X64_CC_FLAGS = DEF(GCC49_X64_CC_FLAGS) -Os
+ RELEASE_GCC49_X64_CC_FLAGS = DEF(GCC49_X64_CC_FLAGS) -Os -Wno-unused-but-set-variable -Wno-unused-const-variable
+@@ -2368,7 +2368,7 @@ RELEASE_GCC49_AARCH64_DLINK_XIPFLAGS = -
+ *_GCC5_IA32_DLINK2_FLAGS = DEF(GCC5_IA32_DLINK2_FLAGS) -no-pie
+ *_GCC5_IA32_RC_FLAGS = DEF(GCC_IA32_RC_FLAGS)
+ *_GCC5_IA32_OBJCOPY_FLAGS =
+-*_GCC5_IA32_NASM_FLAGS = -f elf32
++*_GCC5_IA32_NASM_FLAGS = -f elf32 ENV(NASM_PREFIX_MAP)
+
+ DEBUG_GCC5_IA32_CC_FLAGS = DEF(GCC5_IA32_CC_FLAGS) -flto -Os
+ DEBUG_GCC5_IA32_DLINK_FLAGS = DEF(GCC5_IA32_X64_DLINK_FLAGS) -flto -Os -Wl,-m,elf_i386,--oformat=elf32-i386
+@@ -2400,7 +2400,7 @@ RELEASE_GCC5_IA32_DLINK_FLAGS = DEF(G
+ *_GCC5_X64_DLINK2_FLAGS = DEF(GCC5_X64_DLINK2_FLAGS)
+ *_GCC5_X64_RC_FLAGS = DEF(GCC_X64_RC_FLAGS)
+ *_GCC5_X64_OBJCOPY_FLAGS =
+-*_GCC5_X64_NASM_FLAGS = -f elf64
++*_GCC5_X64_NASM_FLAGS = -f elf64 ENV(NASM_PREFIX_MAP)
+
+ DEBUG_GCC5_X64_CC_FLAGS = DEF(GCC5_X64_CC_FLAGS) -flto -DUSING_LTO -Os
+ DEBUG_GCC5_X64_DLINK_FLAGS = DEF(GCC5_X64_DLINK_FLAGS) -flto -Os
diff --git a/poky/meta/recipes-core/ovmf/ovmf/reproducible.patch b/poky/meta/recipes-core/ovmf/ovmf/reproducible.patch
new file mode 100644
index 0000000..5d2aeaa
--- /dev/null
+++ b/poky/meta/recipes-core/ovmf/ovmf/reproducible.patch
@@ -0,0 +1,165 @@
+This patch fixes various things which make the build more reproducible. Some changes
+here only change intermediate artefacts but that means when you have two build trees
+giving differing results, the differences can be isolated more easily. The issues here
+usually become apparent with longer paths.
+
+This was all debugged with:
+TMPDIR = "${TOPDIR}/tmp"
+vs.
+TMPDIR = "${TOPDIR}/tmp-inital-mylongpath-mylongpath-mylongpath-mylongpath-mylongpath-mylongpath-mylongpath-mylongpath-mylongpath"
+
+The patch specifically:
+
+ * Sorts output in GNUmakefile
+ * Always generates indirect flags files used to avoid pathlength issues else the
+ compile commands suddenly change when using longer paths
+ * Sorts the AutoGenTimeStamp file contents
+ * Makes the TargetDescBlock objects from BuildEngine sortable to allow the makefile fix
+ * Fix ElfConvert within GenFw so that only the basename of the binary being converted
+ is used, else the output from "GenFw XXX.bin" differs from "GenFw /long/path/XXX.bin"
+ with sufficiently long paths
+
+Upstream-Status: Pending [At least some of this might be interesting to upstream]
+Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
+
+Index: git/BaseTools/Source/Python/AutoGen/GenMake.py
+===================================================================
+--- git.orig/BaseTools/Source/Python/AutoGen/GenMake.py
++++ git/BaseTools/Source/Python/AutoGen/GenMake.py
+@@ -571,7 +571,7 @@ cleanlib:
+ os.remove(RespFileList)
+
+ # convert source files and binary files to build targets
+- self.ResultFileList = [str(T.Target) for T in MyAgo.CodaTargetList]
++ self.ResultFileList = sorted([str(T.Target) for T in MyAgo.CodaTargetList])
+ if len(self.ResultFileList) == 0 and len(MyAgo.SourceFileList) != 0:
+ EdkLogger.error("build", AUTOGEN_ERROR, "Nothing to build",
+ ExtraData="[%s]" % str(MyAgo))
+@@ -722,7 +722,7 @@ cleanlib:
+ OutputFile = ''
+ DepsFileList = []
+
+- for Cmd in self.GenFfsList:
++ for Cmd in sorted(self.GenFfsList):
+ if Cmd[2]:
+ for CopyCmd in Cmd[2]:
+ Src, Dst = CopyCmd
+@@ -755,7 +755,7 @@ cleanlib:
+ self.BuildTargetList.append('\t%s' % CmdString)
+
+ self.ParseSecCmd(DepsFileList, Cmd[1])
+- for SecOutputFile, SecDepsFile, SecCmd in self.FfsOutputFileList :
++ for SecOutputFile, SecDepsFile, SecCmd in sorted(self.FfsOutputFileList):
+ self.BuildTargetList.append('%s : %s' % (self.ReplaceMacro(SecOutputFile), self.ReplaceMacro(SecDepsFile)))
+ self.BuildTargetList.append('\t%s' % self.ReplaceMacro(SecCmd))
+ self.FfsOutputFileList = []
+@@ -794,13 +794,13 @@ cleanlib:
+
+ def CommandExceedLimit(self):
+ FlagDict = {
+- 'CC' : { 'Macro' : '$(CC_FLAGS)', 'Value' : False},
+- 'PP' : { 'Macro' : '$(PP_FLAGS)', 'Value' : False},
+- 'APP' : { 'Macro' : '$(APP_FLAGS)', 'Value' : False},
+- 'ASLPP' : { 'Macro' : '$(ASLPP_FLAGS)', 'Value' : False},
+- 'VFRPP' : { 'Macro' : '$(VFRPP_FLAGS)', 'Value' : False},
+- 'ASM' : { 'Macro' : '$(ASM_FLAGS)', 'Value' : False},
+- 'ASLCC' : { 'Macro' : '$(ASLCC_FLAGS)', 'Value' : False},
++ 'CC' : { 'Macro' : '$(CC_FLAGS)', 'Value' : True},
++ 'PP' : { 'Macro' : '$(PP_FLAGS)', 'Value' : True},
++ 'APP' : { 'Macro' : '$(APP_FLAGS)', 'Value' : True},
++ 'ASLPP' : { 'Macro' : '$(ASLPP_FLAGS)', 'Value' : True},
++ 'VFRPP' : { 'Macro' : '$(VFRPP_FLAGS)', 'Value' : True},
++ 'ASM' : { 'Macro' : '$(ASM_FLAGS)', 'Value' : True},
++ 'ASLCC' : { 'Macro' : '$(ASLCC_FLAGS)', 'Value' : True},
+ }
+
+ RespDict = {}
+@@ -1003,9 +1003,9 @@ cleanlib:
+ if not self.ObjTargetDict.get(T.Target.SubDir):
+ self.ObjTargetDict[T.Target.SubDir] = set()
+ self.ObjTargetDict[T.Target.SubDir].add(NewFile)
+- for Type in self._AutoGenObject.Targets:
++ for Type in sorted(self._AutoGenObject.Targets):
+ resp_file_number = 0
+- for T in self._AutoGenObject.Targets[Type]:
++ for T in sorted(self._AutoGenObject.Targets[Type]):
+ # Generate related macros if needed
+ if T.GenFileListMacro and T.FileListMacro not in self.FileListMacros:
+ self.FileListMacros[T.FileListMacro] = []
+Index: git/BaseTools/Source/Python/AutoGen/ModuleAutoGen.py
+===================================================================
+--- git.orig/BaseTools/Source/Python/AutoGen/ModuleAutoGen.py
++++ git/BaseTools/Source/Python/AutoGen/ModuleAutoGen.py
+@@ -1484,6 +1484,9 @@ class ModuleAutoGen(AutoGen):
+ for File in Files:
+ if File.lower().endswith('.pdb'):
+ AsBuiltInfDict['binary_item'].append('DISPOSABLE|' + File)
++
++ AsBuiltInfDict['binary_item'] = sorted(AsBuiltInfDict['binary_item'])
++
+ HeaderComments = self.Module.HeaderComments
+ StartPos = 0
+ for Index in range(len(HeaderComments)):
+@@ -1759,7 +1762,7 @@ class ModuleAutoGen(AutoGen):
+ if os.path.exists (self.TimeStampPath):
+ os.remove (self.TimeStampPath)
+
+- SaveFileOnChange(self.TimeStampPath, "\n".join(FileSet), False)
++ SaveFileOnChange(self.TimeStampPath, "\n".join(sorted(FileSet)), False)
+
+ # Ignore generating makefile when it is a binary module
+ if self.IsBinaryModule:
+Index: git/BaseTools/Source/Python/AutoGen/BuildEngine.py
+===================================================================
+--- git.orig/BaseTools/Source/Python/AutoGen/BuildEngine.py
++++ git/BaseTools/Source/Python/AutoGen/BuildEngine.py
+@@ -70,6 +70,9 @@ class TargetDescBlock(object):
+ else:
+ return str(Other) == self.Target.Path
+
++ def __lt__(self, other):
++ return str(self) < str(other)
++
+ def AddInput(self, Input):
+ if Input not in self.Inputs:
+ self.Inputs.append(Input)
+Index: git/BaseTools/Source/C/GenFw/Elf64Convert.c
+===================================================================
+--- git.orig/BaseTools/Source/C/GenFw/Elf64Convert.c
++++ git/BaseTools/Source/C/GenFw/Elf64Convert.c
+@@ -14,6 +14,8 @@ SPDX-License-Identifier: BSD-2-Clause-Pa
+ #ifndef __GNUC__
+ #include <windows.h>
+ #include <io.h>
++#else
++#define _GNU_SOURCE
+ #endif
+ #include <assert.h>
+ #include <stdio.h>
+@@ -770,7 +772,7 @@ ScanSections64 (
+ }
+ mCoffOffset = mDebugOffset + sizeof(EFI_IMAGE_DEBUG_DIRECTORY_ENTRY) +
+ sizeof(EFI_IMAGE_DEBUG_CODEVIEW_NB10_ENTRY) +
+- strlen(mInImageName) + 1;
++ strlen(basename(mInImageName)) + 1;
+
+ mCoffOffset = CoffAlign(mCoffOffset);
+ if (SectionCount == 0) {
+@@ -1609,7 +1611,7 @@ WriteDebug64 (
+ EFI_IMAGE_DEBUG_DIRECTORY_ENTRY *Dir;
+ EFI_IMAGE_DEBUG_CODEVIEW_NB10_ENTRY *Nb10;
+
+- Len = strlen(mInImageName) + 1;
++ Len = strlen(basename(mInImageName)) + 1;
+
+ Dir = (EFI_IMAGE_DEBUG_DIRECTORY_ENTRY*)(mCoffFile + mDebugOffset);
+ Dir->Type = EFI_IMAGE_DEBUG_TYPE_CODEVIEW;
+@@ -1619,7 +1621,7 @@ WriteDebug64 (
+
+ Nb10 = (EFI_IMAGE_DEBUG_CODEVIEW_NB10_ENTRY*)(Dir + 1);
+ Nb10->Signature = CODEVIEW_SIGNATURE_NB10;
+- strcpy ((char *)(Nb10 + 1), mInImageName);
++ strcpy ((char *)(Nb10 + 1), basename(mInImageName));
+
+
+ NtHdr = (EFI_IMAGE_OPTIONAL_HEADER_UNION *)(mCoffFile + mNtHdrOffset);
diff --git a/poky/meta/recipes-core/ovmf/ovmf_git.bb b/poky/meta/recipes-core/ovmf/ovmf_git.bb
index 896b3b6..888ea08 100644
--- a/poky/meta/recipes-core/ovmf/ovmf_git.bb
+++ b/poky/meta/recipes-core/ovmf/ovmf_git.bb
@@ -17,6 +17,9 @@
file://0002-BaseTools-makefile-adjust-to-build-in-under-bitbake.patch \
file://0004-ovmf-Update-to-latest.patch \
file://zero.patch \
+ file://debug_prefix_map.patch \
+ file://reproducible.patch \
+ file://0001-Fix-VLA-parameter-warning.patch \
"
PV = "edk2-stable202102"
@@ -101,9 +104,23 @@
# to make ovmf-native reusable across distros.
sed -i \
-e 's#^\(DEFINE GCC.*DLINK.*FLAGS *=\)#\1 -fuse-ld=bfd#' \
+ -e 's#-flto#-fno-lto#g' \
+ -e 's#-DUSING_LTO##g' \
${S}/BaseTools/Conf/tools_def.template
}
+# We disable lto above since the results are not reproducible and make it hard to compare
+# binary build aretfacts to debug reproducibility problems.
+# Surprisingly, if you disable lto, you see compiler warnings which are fatal. We therefore
+# have to hack warnings overrides into GCC_PREFIX_MAP to allow it to build.
+
+# We want to pass ${DEBUG_PREFIX_MAP} to gcc commands and also pass in
+# --debug-prefix-map to nasm (we carry a patch to nasm for this). The
+# tools definitions are built by ovmf-native so we need to pass this in
+# at target build time when we know the right values.
+export NASM_PREFIX_MAP = "--debug-prefix-map=${WORKDIR}=/usr/src/debug/ovmf/${EXTENDPE}${PV}-${PR}"
+export GCC_PREFIX_MAP = "${DEBUG_PREFIX_MAP} -Wno-stringop-overflow -Wno-maybe-uninitialized"
+
GCC_VER="$(${CC} -v 2>&1 | tail -n1 | awk '{print $3}')"
fixup_target_tools() {
diff --git a/poky/meta/recipes-core/systemd/systemd-boot_247.6.bb b/poky/meta/recipes-core/systemd/systemd-boot_248.3.bb
similarity index 100%
rename from poky/meta/recipes-core/systemd/systemd-boot_247.6.bb
rename to poky/meta/recipes-core/systemd/systemd-boot_248.3.bb
diff --git a/poky/meta/recipes-core/systemd/systemd-conf_247.6.bb b/poky/meta/recipes-core/systemd/systemd-conf_1.0.bb
similarity index 98%
rename from poky/meta/recipes-core/systemd/systemd-conf_247.6.bb
rename to poky/meta/recipes-core/systemd/systemd-conf_1.0.bb
index ea35e83..235923b 100644
--- a/poky/meta/recipes-core/systemd/systemd-conf_247.6.bb
+++ b/poky/meta/recipes-core/systemd/systemd-conf_1.0.bb
@@ -5,6 +5,8 @@
LICENSE = "MIT"
LIC_FILES_CHKSUM = "file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420"
+PE = "1"
+
PACKAGECONFIG ??= "dhcp-ethernet"
PACKAGECONFIG[dhcp-ethernet] = ""
diff --git a/poky/meta/recipes-core/systemd/systemd-systemctl/systemctl b/poky/meta/recipes-core/systemd/systemd-systemctl/systemctl
index de733e2..e8c3d2d 100755
--- a/poky/meta/recipes-core/systemd/systemd-systemctl/systemctl
+++ b/poky/meta/recipes-core/systemd/systemd-systemctl/systemctl
@@ -160,7 +160,9 @@
class SystemdUnitNotFoundError(Exception):
- pass
+ def __init__(self, path, unit):
+ self.path = path
+ self.unit = unit
class SystemdUnit():
@@ -224,7 +226,10 @@
try:
for also in config.get('Install', 'Also'):
- SystemdUnit(self.root, also).enable()
+ try:
+ SystemdUnit(self.root, also).enable()
+ except SystemdUnitNotFoundError as e:
+ sys.exit("Error: Systemctl also enable issue with %s (%s)" % (service, e.unit))
except KeyError:
pass
@@ -265,7 +270,10 @@
state = presets.state(service)
if state == "enable" or state is None:
- SystemdUnit(root, service).enable()
+ try:
+ SystemdUnit(root, service).enable()
+ except SystemdUnitNotFoundError:
+ sys.exit("Error: Systemctl preset_all issue in %s" % service)
# If we populate the systemd links we also create /etc/machine-id, which
# allows systemd to boot with the filesystem read-only before generating
@@ -307,10 +315,16 @@
if command == "mask":
for service in args.service:
- SystemdUnit(root, service).mask()
+ try:
+ SystemdUnit(root, service).mask()
+ except SystemdUnitNotFoundError as e:
+ sys.exit("Error: Systemctl main mask issue in %s (%s)" % (service, e.unit))
elif command == "enable":
for service in args.service:
- SystemdUnit(root, service).enable()
+ try:
+ SystemdUnit(root, service).enable()
+ except SystemdUnitNotFoundError as e:
+ sys.exit("Error: Systemctl main enable issue in %s (%s)" % (service, e.unit))
elif command == "preset-all":
if len(args.service) != 0:
sys.exit("Too many arguments.")
diff --git a/poky/meta/recipes-core/systemd/systemd.inc b/poky/meta/recipes-core/systemd/systemd.inc
index 7d3b306..0524a25 100644
--- a/poky/meta/recipes-core/systemd/systemd.inc
+++ b/poky/meta/recipes-core/systemd/systemd.inc
@@ -14,8 +14,9 @@
LIC_FILES_CHKSUM = "file://LICENSE.GPL2;md5=751419260aa954499f7abaabaa882bbe \
file://LICENSE.LGPL2.1;md5=4fbd65380cdd255951079008b364516c"
-SRCREV = "17472dca0160cbe7b807ca648475fd70d0d62fe5"
-SRCBRANCH = "v247-stable"
-SRC_URI = "git://github.com/systemd/systemd-stable.git;protocol=git;branch=${SRCBRANCH}"
+SRCREV = "37c4cfde0ce613f0f00544d3f4e2e72bf93d9c76"
+SRCBRANCH = "v248-stable"
+SRC_URI = "git://github.com/systemd/systemd-stable.git;protocol=git;branch=${SRCBRANCH} \
+"
S = "${WORKDIR}/git"
diff --git a/poky/meta/recipes-core/systemd/systemd/0001-analyze-resolve-executable-path-if-it-is-relative.patch b/poky/meta/recipes-core/systemd/systemd/0001-analyze-resolve-executable-path-if-it-is-relative.patch
deleted file mode 100644
index fd7f94a..0000000
--- a/poky/meta/recipes-core/systemd/systemd/0001-analyze-resolve-executable-path-if-it-is-relative.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From b9b7a8e3825f0433e120f7a6d7d5d635a839cab9 Mon Sep 17 00:00:00 2001
-From: Mingli Yu <mingli.yu@windriver.com>
-Date: Thu, 21 Jan 2021 06:19:44 +0000
-Subject: [PATCH] analyze: resolve executable path if it is relative
-
-Upstream-Status: Backport [https://github.com/systemd/systemd/commit/f1fb046a985521f7d4a662f02546686ff20b7e5d]
-
-Signed-off-by: Mingli Yu <mingli.yu@windriver.com>
----
- src/analyze/analyze-verify.c | 7 +++++--
- 1 file changed, 5 insertions(+), 2 deletions(-)
-
-diff --git a/src/analyze/analyze-verify.c b/src/analyze/analyze-verify.c
-index a9c89173bf..969523df18 100644
---- a/src/analyze/analyze-verify.c
-+++ b/src/analyze/analyze-verify.c
-@@ -115,14 +115,17 @@ static int verify_socket(Unit *u) {
- }
-
- int verify_executable(Unit *u, const ExecCommand *exec) {
-+ int r;
-+
- if (!exec)
- return 0;
-
- if (exec->flags & EXEC_COMMAND_IGNORE_FAILURE)
- return 0;
-
-- if (access(exec->path, X_OK) < 0)
-- return log_unit_error_errno(u, errno, "Command %s is not executable: %m", exec->path);
-+ r = find_executable_full(exec->path, false, NULL);
-+ if (r < 0)
-+ return log_unit_error_errno(u, r, "Command %s is not executable: %m", exec->path);
-
- return 0;
- }
---
-2.26.2
-
diff --git a/poky/meta/recipes-core/systemd/systemd/0001-logind-Restore-chvt-as-non-root-user-without-polkit.patch b/poky/meta/recipes-core/systemd/systemd/0001-logind-Restore-chvt-as-non-root-user-without-polkit.patch
deleted file mode 100644
index 89ef39b..0000000
--- a/poky/meta/recipes-core/systemd/systemd/0001-logind-Restore-chvt-as-non-root-user-without-polkit.patch
+++ /dev/null
@@ -1,227 +0,0 @@
-From 150d9cade6d475570395cb418b824524dead9577 Mon Sep 17 00:00:00 2001
-From: Joshua Watt <JPEWhacker@gmail.com>
-Date: Fri, 30 Oct 2020 08:15:43 -0500
-Subject: [PATCH] logind: Restore chvt as non-root user without polkit
-
-4acf0cfd2f ("logind: check PolicyKit before allowing VT switch") broke
-the ability to write user sessions that run graphical sessions (e.g.
-weston/X11). This was partially amended in 19bb87fbfa ("login: allow
-non-console sessions to change vt") by changing the default PolicyKit
-policy so that non-root users are again allowed to switch the VT. This
-makes the policy when PolKit is not enabled (as on many embedded
-systems) match the default PolKit policy and allows launching graphical
-sessions as a non-root user.
-
-Closes #17473
----
- src/login/logind-dbus.c | 11 ++-------
- src/login/logind-polkit.c | 26 +++++++++++++++++++++
- src/login/logind-polkit.h | 10 ++++++++
- src/login/logind-seat-dbus.c | 41 ++++-----------------------------
- src/login/logind-session-dbus.c | 11 ++-------
- src/login/meson.build | 1 +
- 6 files changed, 46 insertions(+), 54 deletions(-)
- create mode 100644 src/login/logind-polkit.c
- create mode 100644 src/login/logind-polkit.h
-
-diff --git a/src/login/logind-dbus.c b/src/login/logind-dbus.c
-index 0f83ed99bc..a3765d88ba 100644
---- a/src/login/logind-dbus.c
-+++ b/src/login/logind-dbus.c
-@@ -30,6 +30,7 @@
- #include "format-util.h"
- #include "fs-util.h"
- #include "logind-dbus.h"
-+#include "logind-polkit.h"
- #include "logind-seat-dbus.h"
- #include "logind-session-dbus.h"
- #include "logind-user-dbus.h"
-@@ -1047,15 +1048,7 @@ static int method_activate_session_on_seat(sd_bus_message *message, void *userda
- return sd_bus_error_setf(error, BUS_ERROR_SESSION_NOT_ON_SEAT,
- "Session %s not on seat %s", session_name, seat_name);
-
-- r = bus_verify_polkit_async(
-- message,
-- CAP_SYS_ADMIN,
-- "org.freedesktop.login1.chvt",
-- NULL,
-- false,
-- UID_INVALID,
-- &m->polkit_registry,
-- error);
-+ r = check_polkit_chvt(message, m, error);
- if (r < 0)
- return r;
- if (r == 0)
-diff --git a/src/login/logind-polkit.c b/src/login/logind-polkit.c
-new file mode 100644
-index 0000000000..9072570cc6
---- /dev/null
-+++ b/src/login/logind-polkit.c
-@@ -0,0 +1,26 @@
-+/* SPDX-License-Identifier: LGPL-2.1+ */
-+
-+#include "bus-polkit.h"
-+#include "logind-polkit.h"
-+#include "missing_capability.h"
-+#include "user-util.h"
-+
-+int check_polkit_chvt(sd_bus_message *message, Manager *manager, sd_bus_error *error) {
-+#if ENABLE_POLKIT
-+ return bus_verify_polkit_async(
-+ message,
-+ CAP_SYS_ADMIN,
-+ "org.freedesktop.login1.chvt",
-+ NULL,
-+ false,
-+ UID_INVALID,
-+ &manager->polkit_registry,
-+ error);
-+#else
-+ /* Allow chvt when polkit is not present. This allows a service to start a graphical session as a
-+ * non-root user when polkit is not compiled in, matching the default polkit policy */
-+ return 1;
-+#endif
-+}
-+
-+
-diff --git a/src/login/logind-polkit.h b/src/login/logind-polkit.h
-new file mode 100644
-index 0000000000..476c077a8a
---- /dev/null
-+++ b/src/login/logind-polkit.h
-@@ -0,0 +1,10 @@
-+/* SPDX-License-Identifier: LGPL-2.1+ */
-+#pragma once
-+
-+#include "sd-bus.h"
-+
-+#include "bus-object.h"
-+#include "logind.h"
-+
-+int check_polkit_chvt(sd_bus_message *message, Manager *manager, sd_bus_error *error);
-+
-diff --git a/src/login/logind-seat-dbus.c b/src/login/logind-seat-dbus.c
-index a945132284..f22e9e2734 100644
---- a/src/login/logind-seat-dbus.c
-+++ b/src/login/logind-seat-dbus.c
-@@ -9,6 +9,7 @@
- #include "bus-polkit.h"
- #include "bus-util.h"
- #include "logind-dbus.h"
-+#include "logind-polkit.h"
- #include "logind-seat-dbus.h"
- #include "logind-seat.h"
- #include "logind-session-dbus.h"
-@@ -179,15 +180,7 @@ static int method_activate_session(sd_bus_message *message, void *userdata, sd_b
- if (session->seat != s)
- return sd_bus_error_setf(error, BUS_ERROR_SESSION_NOT_ON_SEAT, "Session %s not on seat %s", name, s->id);
-
-- r = bus_verify_polkit_async(
-- message,
-- CAP_SYS_ADMIN,
-- "org.freedesktop.login1.chvt",
-- NULL,
-- false,
-- UID_INVALID,
-- &s->manager->polkit_registry,
-- error);
-+ r = check_polkit_chvt(message, s->manager, error);
- if (r < 0)
- return r;
- if (r == 0)
-@@ -215,15 +208,7 @@ static int method_switch_to(sd_bus_message *message, void *userdata, sd_bus_erro
- if (to <= 0)
- return sd_bus_error_setf(error, SD_BUS_ERROR_INVALID_ARGS, "Invalid virtual terminal");
-
-- r = bus_verify_polkit_async(
-- message,
-- CAP_SYS_ADMIN,
-- "org.freedesktop.login1.chvt",
-- NULL,
-- false,
-- UID_INVALID,
-- &s->manager->polkit_registry,
-- error);
-+ r = check_polkit_chvt(message, s->manager, error);
- if (r < 0)
- return r;
- if (r == 0)
-@@ -243,15 +228,7 @@ static int method_switch_to_next(sd_bus_message *message, void *userdata, sd_bus
- assert(message);
- assert(s);
-
-- r = bus_verify_polkit_async(
-- message,
-- CAP_SYS_ADMIN,
-- "org.freedesktop.login1.chvt",
-- NULL,
-- false,
-- UID_INVALID,
-- &s->manager->polkit_registry,
-- error);
-+ r = check_polkit_chvt(message, s->manager, error);
- if (r < 0)
- return r;
- if (r == 0)
-@@ -271,15 +248,7 @@ static int method_switch_to_previous(sd_bus_message *message, void *userdata, sd
- assert(message);
- assert(s);
-
-- r = bus_verify_polkit_async(
-- message,
-- CAP_SYS_ADMIN,
-- "org.freedesktop.login1.chvt",
-- NULL,
-- false,
-- UID_INVALID,
-- &s->manager->polkit_registry,
-- error);
-+ r = check_polkit_chvt(message, s->manager, error);
- if (r < 0)
- return r;
- if (r == 0)
-diff --git a/src/login/logind-session-dbus.c b/src/login/logind-session-dbus.c
-index ccc5ac8df2..57c8a4e900 100644
---- a/src/login/logind-session-dbus.c
-+++ b/src/login/logind-session-dbus.c
-@@ -11,6 +11,7 @@
- #include "fd-util.h"
- #include "logind-brightness.h"
- #include "logind-dbus.h"
-+#include "logind-polkit.h"
- #include "logind-seat-dbus.h"
- #include "logind-session-dbus.h"
- #include "logind-session-device.h"
-@@ -192,15 +193,7 @@ int bus_session_method_activate(sd_bus_message *message, void *userdata, sd_bus_
- assert(message);
- assert(s);
-
-- r = bus_verify_polkit_async(
-- message,
-- CAP_SYS_ADMIN,
-- "org.freedesktop.login1.chvt",
-- NULL,
-- false,
-- UID_INVALID,
-- &s->manager->polkit_registry,
-- error);
-+ r = check_polkit_chvt(message, s->manager, error);
- if (r < 0)
- return r;
- if (r == 0)
-diff --git a/src/login/meson.build b/src/login/meson.build
-index 0a7d3d5440..7e46be2add 100644
---- a/src/login/meson.build
-+++ b/src/login/meson.build
-@@ -26,6 +26,7 @@ liblogind_core_sources = files('''
- logind-device.h
- logind-inhibit.c
- logind-inhibit.h
-+ logind-polkit.c
- logind-seat-dbus.c
- logind-seat-dbus.h
- logind-seat.c
---
-2.28.0
-
diff --git a/poky/meta/recipes-core/systemd/systemd/0001-test-parse-argument-Include-signal.h.patch b/poky/meta/recipes-core/systemd/systemd/0001-test-parse-argument-Include-signal.h.patch
new file mode 100644
index 0000000..3af1daa
--- /dev/null
+++ b/poky/meta/recipes-core/systemd/systemd/0001-test-parse-argument-Include-signal.h.patch
@@ -0,0 +1,29 @@
+From 1adde6721ead386ccee6efe48038d6944b96319a Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem@gmail.com>
+Date: Mon, 24 May 2021 18:26:27 -0700
+Subject: [PATCH] test-parse-argument: Include signal.h
+
+Fixes
+src/test/test-parse-argument.c:49:29: error: use of undeclared identifier 'SIGABRT'
+
+Upstream-Status: Submitted [https://github.com/systemd/systemd/pull/19718]
+Signed-off-by: Khem Raj <raj.khem@gmail.com>
+---
+ src/test/test-parse-argument.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/src/test/test-parse-argument.c b/src/test/test-parse-argument.c
+index 4081a9f25a..820d69f092 100644
+--- a/src/test/test-parse-argument.c
++++ b/src/test/test-parse-argument.c
+@@ -3,6 +3,7 @@
+ #include "parse-argument.h"
+ #include "stdio-util.h"
+ #include "tests.h"
++#include <signal.h>
+
+ static void test_parse_json_argument(void) {
+ log_info("/* %s */", __func__);
+--
+2.31.1
+
diff --git a/poky/meta/recipes-core/systemd/systemd/0002-don-t-use-glibc-specific-qsort_r.patch b/poky/meta/recipes-core/systemd/systemd/0002-don-t-use-glibc-specific-qsort_r.patch
index d856bcb..4cdf66e 100644
--- a/poky/meta/recipes-core/systemd/systemd/0002-don-t-use-glibc-specific-qsort_r.patch
+++ b/poky/meta/recipes-core/systemd/systemd/0002-don-t-use-glibc-specific-qsort_r.patch
@@ -1,7 +1,7 @@
-From 66ece0b870b3a34fdabc48b88437e6cc354e9fce Mon Sep 17 00:00:00 2001
+From 159c53612444ec1df492bae528a5a88a275b93bf Mon Sep 17 00:00:00 2001
From: Chen Qi <Qi.Chen@windriver.com>
Date: Mon, 25 Feb 2019 13:41:41 +0800
-Subject: [PATCH 02/26] don't use glibc-specific qsort_r
+Subject: [PATCH] don't use glibc-specific qsort_r
Upstream-Status: Inappropriate [musl specific]
@@ -12,6 +12,7 @@
Signed-off-by: Andrej Valek <andrej.valek@siemens.com>
[Rebased for v247]
Signed-off-by: Luca Boccassi <luca.boccassi@microsoft.com>
+
---
src/basic/sort-util.h | 14 ------------
src/libsystemd/sd-hwdb/hwdb-util.c | 19 +++++++++++-----
@@ -19,14 +20,13 @@
3 files changed, 38 insertions(+), 31 deletions(-)
diff --git a/src/basic/sort-util.h b/src/basic/sort-util.h
-index 1d194a1f04..3394c9eb72 100644
+index 49586a4a24..d92a5ab0ed 100644
--- a/src/basic/sort-util.h
+++ b/src/basic/sort-util.h
-@@ -54,17 +54,3 @@ static inline void _qsort_safe(void *base, size_t nmemb, size_t size, __compar_f
- int (*_func_)(const typeof(p[0])*, const typeof(p[0])*) = func; \
+@@ -55,18 +55,4 @@ static inline void _qsort_safe(void *base, size_t nmemb, size_t size, __compar_f
_qsort_safe((p), (n), sizeof((p)[0]), (__compar_fn_t) _func_); \
})
--
+
-static inline void qsort_r_safe(void *base, size_t nmemb, size_t size, __compar_d_fn_t compar, void *userdata) {
- if (nmemb <= 1)
- return;
@@ -40,11 +40,13 @@
- int (*_func_)(const typeof(p[0])*, const typeof(p[0])*, typeof(userdata)) = func; \
- qsort_r_safe((p), (n), sizeof((p)[0]), (__compar_d_fn_t) _func_, userdata); \
- })
+-
+ int cmp_int(const int *a, const int *b);
diff --git a/src/libsystemd/sd-hwdb/hwdb-util.c b/src/libsystemd/sd-hwdb/hwdb-util.c
-index 4c94ba9c88..95495dba6d 100644
+index fd45ff0f54..ac4b63c49b 100644
--- a/src/libsystemd/sd-hwdb/hwdb-util.c
+++ b/src/libsystemd/sd-hwdb/hwdb-util.c
-@@ -126,9 +126,13 @@ static void trie_free(struct trie *trie) {
+@@ -126,9 +126,13 @@ static struct trie* trie_free(struct trie *trie) {
DEFINE_TRIVIAL_CLEANUP_FUNC(struct trie*, trie_free);
@@ -85,10 +87,10 @@
}
diff --git a/src/shared/format-table.c b/src/shared/format-table.c
-index a13a198b7a..bce10bc607 100644
+index dccb796b26..c3ab8ac296 100644
--- a/src/shared/format-table.c
+++ b/src/shared/format-table.c
-@@ -1243,30 +1243,32 @@ static int cell_data_compare(TableData *a, size_t index_a, TableData *b, size_t
+@@ -1290,30 +1290,32 @@ static int cell_data_compare(TableData *a, size_t index_a, TableData *b, size_t
return CMP(index_a, index_b);
}
@@ -131,7 +133,7 @@
}
/* Order identical lines by the order there were originally added in */
-@@ -1844,7 +1846,12 @@ int table_print(Table *t, FILE *f) {
+@@ -1952,7 +1954,12 @@ int table_print(Table *t, FILE *f) {
for (size_t i = 0; i < n_rows; i++)
sorted[i] = i * t->n_columns;
@@ -145,7 +147,7 @@
}
if (t->display_map)
-@@ -2440,7 +2447,12 @@ int table_to_json(Table *t, JsonVariant **ret) {
+@@ -2580,7 +2587,12 @@ int table_to_json(Table *t, JsonVariant **ret) {
for (size_t i = 0; i < n_rows; i++)
sorted[i] = i * t->n_columns;
@@ -159,6 +161,3 @@
}
if (t->display_map)
---
-2.27.0
-
diff --git a/poky/meta/recipes-core/systemd/systemd/0003-missing_type.h-add-__compare_fn_t-and-comparison_fn_.patch b/poky/meta/recipes-core/systemd/systemd/0003-missing_type.h-add-__compare_fn_t-and-comparison_fn_.patch
index f43a22a..9b1768d 100644
--- a/poky/meta/recipes-core/systemd/systemd/0003-missing_type.h-add-__compare_fn_t-and-comparison_fn_.patch
+++ b/poky/meta/recipes-core/systemd/systemd/0003-missing_type.h-add-__compare_fn_t-and-comparison_fn_.patch
@@ -1,7 +1,7 @@
-From 9f0d5996bbb2db3679a4075fa8301750b786c03b Mon Sep 17 00:00:00 2001
+From 4afb8adc83348bf75964fc10af7902e04dd62637 Mon Sep 17 00:00:00 2001
From: Chen Qi <Qi.Chen@windriver.com>
Date: Mon, 25 Feb 2019 13:55:12 +0800
-Subject: [PATCH 03/26] missing_type.h: add __compare_fn_t and comparison_fn_t
+Subject: [PATCH] missing_type.h: add __compare_fn_t and comparison_fn_t
Make it work with musl where comparison_fn_t and __compare_fn_t
is not provided.
@@ -13,11 +13,12 @@
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
[Rebased for v242]
Signed-off-by: Andrej Valek <andrej.valek@siemens.com>
+
---
- src/basic/missing_type.h | 9 +++++++++
- src/basic/sort-util.h | 1 +
- src/core/kmod-setup.c | 1 +
- src/journal/catalog.c | 1 +
+ src/basic/missing_type.h | 9 +++++++++
+ src/basic/sort-util.h | 1 +
+ src/core/kmod-setup.c | 1 +
+ src/libsystemd/sd-journal/catalog.c | 1 +
4 files changed, 12 insertions(+)
diff --git a/src/basic/missing_type.h b/src/basic/missing_type.h
@@ -38,7 +39,7 @@
+typedef int (*__compar_fn_t)(const void *, const void *);
+#endif
diff --git a/src/basic/sort-util.h b/src/basic/sort-util.h
-index 3394c9eb72..d9cb2aecb6 100644
+index d92a5ab0ed..a63867c716 100644
--- a/src/basic/sort-util.h
+++ b/src/basic/sort-util.h
@@ -4,6 +4,7 @@
@@ -61,10 +62,10 @@
#if HAVE_KMOD
#include "module-util.h"
-diff --git a/src/journal/catalog.c b/src/journal/catalog.c
-index 0f6ad8a29e..4e1077ade4 100644
---- a/src/journal/catalog.c
-+++ b/src/journal/catalog.c
+diff --git a/src/libsystemd/sd-journal/catalog.c b/src/libsystemd/sd-journal/catalog.c
+index aea3241d18..75e6c56a28 100644
+--- a/src/libsystemd/sd-journal/catalog.c
++++ b/src/libsystemd/sd-journal/catalog.c
@@ -28,6 +28,7 @@
#include "string-util.h"
#include "strv.h"
@@ -73,6 +74,3 @@
const char * const catalog_file_dirs[] = {
"/usr/local/lib/systemd/catalog/",
---
-2.27.0
-
diff --git a/poky/meta/recipes-core/systemd/systemd/0004-add-fallback-parse_printf_format-implementation.patch b/poky/meta/recipes-core/systemd/systemd/0004-add-fallback-parse_printf_format-implementation.patch
index bdd64a0..dc40a2f 100644
--- a/poky/meta/recipes-core/systemd/systemd/0004-add-fallback-parse_printf_format-implementation.patch
+++ b/poky/meta/recipes-core/systemd/systemd/0004-add-fallback-parse_printf_format-implementation.patch
@@ -1,7 +1,7 @@
-From f3dbe29f7620a063af4d8eb3ea7c48ecd410200d Mon Sep 17 00:00:00 2001
-From: Chen Qi <Qi.Chen@windriver.com>
-Date: Mon, 25 Feb 2019 14:04:21 +0800
-Subject: [PATCH 04/26] add fallback parse_printf_format implementation
+From 6c18e5f9373da3e3b38f2c5727e2aefe07fcbbd9 Mon Sep 17 00:00:00 2001
+From: Alexander Kanavin <alex.kanavin@gmail.com>
+Date: Sat, 22 May 2021 20:26:24 +0200
+Subject: [PATCH] [PATCH] add fallback parse_printf_format implementation
Upstream-Status: Inappropriate [musl specific]
@@ -11,21 +11,21 @@
[rebased for systemd 243]
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
---
- meson.build | 1 +
- src/basic/meson.build | 5 +
- src/basic/parse-printf-format.c | 273 ++++++++++++++++++++++++++++++++
- src/basic/parse-printf-format.h | 57 +++++++
- src/basic/stdio-util.h | 2 +-
- src/journal/journal-send.c | 2 +-
+ meson.build | 1 +
+ src/basic/meson.build | 5 +
+ src/basic/parse-printf-format.c | 273 +++++++++++++++++++++++
+ src/basic/parse-printf-format.h | 57 +++++
+ src/basic/stdio-util.h | 2 +-
+ src/libsystemd/sd-journal/journal-send.c | 2 +-
6 files changed, 338 insertions(+), 2 deletions(-)
create mode 100644 src/basic/parse-printf-format.c
create mode 100644 src/basic/parse-printf-format.h
diff --git a/meson.build b/meson.build
-index f406d595e6..6aa47fc755 100644
+index 27186d63a3..2abb7b3188 100644
--- a/meson.build
+++ b/meson.build
-@@ -646,6 +646,7 @@ endif
+@@ -675,6 +675,7 @@ endif
foreach header : ['crypt.h',
'linux/memfd.h',
'linux/vm_sockets.h',
@@ -34,21 +34,21 @@
'valgrind/memcheck.h',
'valgrind/valgrind.h',
diff --git a/src/basic/meson.build b/src/basic/meson.build
-index 1183ea83ad..aa5c958850 100644
+index 60ef801a25..aba2172edd 100644
--- a/src/basic/meson.build
+++ b/src/basic/meson.build
-@@ -322,6 +322,11 @@ foreach item : [['af', af_list_txt, 'af', ''],
- endforeach
+@@ -341,6 +341,11 @@ endforeach
basic_sources += generated_gperf_headers
-+
+
+if conf.get('HAVE_PRINTF_H') != 1
+ basic_sources += [files('parse-printf-format.c')]
+endif
+
- basic_gcrypt_sources = files(
- 'gcrypt-util.c',
- 'gcrypt-util.h')
++
+ ############################################################
+
+ arch_list = [
diff --git a/src/basic/parse-printf-format.c b/src/basic/parse-printf-format.c
new file mode 100644
index 0000000000..49437e5445
@@ -410,10 +410,10 @@
#define snprintf_ok(buf, len, fmt, ...) \
((size_t) snprintf(buf, len, fmt, __VA_ARGS__) < (len))
-diff --git a/src/journal/journal-send.c b/src/journal/journal-send.c
+diff --git a/src/libsystemd/sd-journal/journal-send.c b/src/libsystemd/sd-journal/journal-send.c
index fd3fd7ef9c..e8e6ad555b 100644
---- a/src/journal/journal-send.c
-+++ b/src/journal/journal-send.c
+--- a/src/libsystemd/sd-journal/journal-send.c
++++ b/src/libsystemd/sd-journal/journal-send.c
@@ -2,7 +2,6 @@
#include <errno.h>
@@ -431,5 +431,5 @@
#define SNDBUF_SIZE (8*1024*1024)
--
-2.27.0
+2.24.0
diff --git a/poky/meta/recipes-core/systemd/systemd/0005-src-basic-missing.h-check-for-missing-strndupa.patch b/poky/meta/recipes-core/systemd/systemd/0005-src-basic-missing.h-check-for-missing-strndupa.patch
index d63e3c0..814c28f 100644
--- a/poky/meta/recipes-core/systemd/systemd/0005-src-basic-missing.h-check-for-missing-strndupa.patch
+++ b/poky/meta/recipes-core/systemd/systemd/0005-src-basic-missing.h-check-for-missing-strndupa.patch
@@ -1,7 +1,7 @@
-From 5aeae0ea89f5af74ed5d95bed1d87a03b3801ff0 Mon Sep 17 00:00:00 2001
+From 6b0732ac7164914ce16e231e35980b849bdfc4c8 Mon Sep 17 00:00:00 2001
From: Chen Qi <Qi.Chen@windriver.com>
Date: Mon, 25 Feb 2019 14:18:21 +0800
-Subject: [PATCH 05/26] src/basic/missing.h: check for missing strndupa
+Subject: [PATCH] src/basic/missing.h: check for missing strndupa
include missing.h for definition of strndupa
@@ -17,6 +17,7 @@
[rebased for systemd 244]
[Rebased for v247]
Signed-off-by: Luca Boccassi <luca.boccassi@microsoft.com>
+
---
meson.build | 1 +
src/backlight/backlight.c | 1 +
@@ -25,6 +26,7 @@
src/basic/log.c | 1 +
src/basic/missing_stdlib.h | 12 ++++++++++++
src/basic/mkdir.c | 1 +
+ src/basic/mountpoint-util.c | 1 +
src/basic/parse-util.c | 1 +
src/basic/path-lookup.c | 1 +
src/basic/proc-cmdline.c | 1 +
@@ -41,12 +43,12 @@
src/coredump/coredump-vacuum.c | 1 +
src/journal-remote/journal-remote-main.c | 1 +
src/journal/journalctl.c | 1 +
- src/journal/sd-journal.c | 1 +
src/libsystemd/sd-bus/bus-message.c | 1 +
src/libsystemd/sd-bus/bus-objects.c | 1 +
src/libsystemd/sd-bus/bus-socket.c | 1 +
src/libsystemd/sd-bus/sd-bus.c | 1 +
src/libsystemd/sd-bus/test-bus-benchmark.c | 1 +
+ src/libsystemd/sd-journal/sd-journal.c | 1 +
src/locale/keymap-util.c | 1 +
src/login/pam_systemd.c | 1 +
src/network/generator/network-generator.c | 1 +
@@ -68,14 +70,14 @@
src/udev/udev-builtin-path_id.c | 1 +
src/udev/udev-event.c | 1 +
src/udev/udev-rules.c | 1 +
- 50 files changed, 61 insertions(+)
+ 51 files changed, 62 insertions(+)
--- a/meson.build
+++ b/meson.build
-@@ -535,6 +535,7 @@ foreach ident : [
- #include <sys/wait.h>'''],
- ['mallinfo', '''#include <malloc.h>'''],
+@@ -550,6 +550,7 @@ foreach ident : [
+ ['execveat', '''#include <unistd.h>'''],
['close_range', '''#include <unistd.h>'''],
+ ['epoll_pwait2', '''#include <sys/epoll.h>'''],
+ ['strndupa' , '''#include <string.h>'''],
]
@@ -102,7 +104,7 @@
_cleanup_free_ char *fs = NULL;
--- a/src/basic/env-util.c
+++ b/src/basic/env-util.c
-@@ -15,6 +15,7 @@
+@@ -18,6 +18,7 @@
#include "string-util.h"
#include "strv.h"
#include "utf8.h"
@@ -148,9 +150,19 @@
int mkdir_safe_internal(
const char *path,
+--- a/src/basic/mountpoint-util.c
++++ b/src/basic/mountpoint-util.c
+@@ -12,6 +12,7 @@
+ #include "missing_stat.h"
+ #include "missing_syscall.h"
+ #include "mkdir.h"
++#include "missing_stdlib.h"
+ #include "mountpoint-util.h"
+ #include "parse-util.h"
+ #include "path-util.h"
--- a/src/basic/parse-util.c
+++ b/src/basic/parse-util.c
-@@ -22,6 +22,7 @@
+@@ -19,6 +19,7 @@
#include "stat-util.h"
#include "string-util.h"
#include "strv.h"
@@ -197,7 +209,7 @@
+#include "missing_stdlib.h"
#if HAVE_SELINUX
- DEFINE_TRIVIAL_CLEANUP_FUNC(context_t, context_free);
+ DEFINE_TRIVIAL_CLEANUP_FUNC_FULL(context_t, context_free, NULL);
--- a/src/basic/time-util.c
+++ b/src/basic/time-util.c
@@ -27,6 +27,7 @@
@@ -220,10 +232,10 @@
--- a/src/core/dbus-cgroup.c
+++ b/src/core/dbus-cgroup.c
-@@ -16,6 +16,7 @@
- #include "fileio.h"
+@@ -17,6 +17,7 @@
#include "limits-util.h"
#include "path-util.h"
+ #include "percent-util.h"
+#include "missing_stdlib.h"
BUS_DEFINE_PROPERTY_GET(bus_property_get_tasks_max, "t", TasksMax, tasks_max_resolve);
@@ -240,7 +252,7 @@
static BUS_DEFINE_PROPERTY_GET_ENUM(property_get_exec_input, exec_input, ExecInput);
--- a/src/core/dbus-util.c
+++ b/src/core/dbus-util.c
-@@ -7,6 +7,7 @@
+@@ -9,6 +9,7 @@
#include "unit-printf.h"
#include "user-util.h"
#include "unit.h"
@@ -251,7 +263,7 @@
--- a/src/core/execute.c
+++ b/src/core/execute.c
@@ -96,6 +96,7 @@
- #include "unit.h"
+ #include "unit-serialize.h"
#include "user-util.h"
#include "utmp-wtmp.h"
+#include "missing_stdlib.h"
@@ -290,7 +302,7 @@
#define DEFAULT_MAX_USE_UPPER (uint64_t) (4ULL*1024ULL*1024ULL*1024ULL) /* 4 GiB */
--- a/src/journal-remote/journal-remote-main.c
+++ b/src/journal-remote/journal-remote-main.c
-@@ -22,6 +22,7 @@
+@@ -24,6 +24,7 @@
#include "stat-util.h"
#include "string-table.h"
#include "strv.h"
@@ -300,7 +312,7 @@
#define CERT_FILE CERTIFICATE_ROOT "/certs/journal-remote.pem"
--- a/src/journal/journalctl.c
+++ b/src/journal/journalctl.c
-@@ -73,6 +73,7 @@
+@@ -72,6 +72,7 @@
#include "unit-name.h"
#include "user-util.h"
#include "varlink.h"
@@ -308,19 +320,9 @@
#define DEFAULT_FSS_INTERVAL_USEC (15*USEC_PER_MINUTE)
#define PROCESS_INOTIFY_INTERVAL 1024 /* Every 1,024 messages processed */
---- a/src/journal/sd-journal.c
-+++ b/src/journal/sd-journal.c
-@@ -40,6 +40,7 @@
- #include "string-util.h"
- #include "strv.h"
- #include "syslog-util.h"
-+#include "missing_stdlib.h"
-
- #define JOURNAL_FILES_MAX 7168
-
--- a/src/libsystemd/sd-bus/bus-message.c
+++ b/src/libsystemd/sd-bus/bus-message.c
-@@ -21,6 +21,7 @@
+@@ -20,6 +20,7 @@
#include "strv.h"
#include "time-util.h"
#include "utf8.h"
@@ -330,7 +332,7 @@
--- a/src/libsystemd/sd-bus/bus-objects.c
+++ b/src/libsystemd/sd-bus/bus-objects.c
-@@ -13,6 +13,7 @@
+@@ -12,6 +12,7 @@
#include "set.h"
#include "string-util.h"
#include "strv.h"
@@ -351,9 +353,9 @@
--- a/src/libsystemd/sd-bus/sd-bus.c
+++ b/src/libsystemd/sd-bus/sd-bus.c
@@ -41,6 +41,7 @@
- #include "process-util.h"
#include "string-util.h"
#include "strv.h"
+ #include "user-util.h"
+#include "missing_stdlib.h"
#define log_debug_bus_message(m) \
@@ -361,16 +363,26 @@
--- a/src/libsystemd/sd-bus/test-bus-benchmark.c
+++ b/src/libsystemd/sd-bus/test-bus-benchmark.c
@@ -14,6 +14,7 @@
- #include "missing_resource.h"
+ #include "string-util.h"
#include "time-util.h"
#include "util.h"
+#include "missing_stdlib.h"
#define MAX_SIZE (2*1024*1024)
+--- a/src/libsystemd/sd-journal/sd-journal.c
++++ b/src/libsystemd/sd-journal/sd-journal.c
+@@ -40,6 +40,7 @@
+ #include "string-util.h"
+ #include "strv.h"
+ #include "syslog-util.h"
++#include "missing_stdlib.h"
+
+ #define JOURNAL_FILES_MAX 7168
+
--- a/src/locale/keymap-util.c
+++ b/src/locale/keymap-util.c
-@@ -21,6 +21,7 @@
+@@ -24,6 +24,7 @@
#include "string-util.h"
#include "strv.h"
#include "tmpfile-util.h"
@@ -410,17 +422,17 @@
Settings *s;
--- a/src/nss-mymachines/nss-mymachines.c
+++ b/src/nss-mymachines/nss-mymachines.c
-@@ -19,6 +19,7 @@
+@@ -21,6 +21,7 @@
#include "nss-util.h"
#include "signal-util.h"
#include "string-util.h"
+#include "missing_stdlib.h"
- NSS_GETHOSTBYNAME_PROTOTYPES(mymachines);
- NSS_GETPW_PROTOTYPES(mymachines);
+ static void setup_logging(void) {
+ /* We need a dummy function because log_parse_environment is a macro. */
--- a/src/portable/portable.c
+++ b/src/portable/portable.c
-@@ -31,6 +31,7 @@
+@@ -32,6 +32,7 @@
#include "strv.h"
#include "tmpfile-util.h"
#include "user-util.h"
@@ -430,7 +442,7 @@
--- a/src/resolve/resolvectl.c
+++ b/src/resolve/resolvectl.c
-@@ -37,6 +37,7 @@
+@@ -41,6 +41,7 @@
#include "terminal-util.h"
#include "utf8.h"
#include "verbs.h"
@@ -460,7 +472,7 @@
char *cgroup_path;
--- a/src/shared/bus-unit-util.c
+++ b/src/shared/bus-unit-util.c
-@@ -44,6 +44,7 @@
+@@ -45,6 +45,7 @@
#include "unit-def.h"
#include "user-util.h"
#include "utf8.h"
@@ -551,16 +563,16 @@
--- a/src/udev/udev-builtin-path_id.c
+++ b/src/udev/udev-builtin-path_id.c
@@ -22,6 +22,7 @@
- #include "strv.h"
#include "sysexits.h"
#include "udev-builtin.h"
+ #include "udev-util.h"
+#include "missing_stdlib.h"
_printf_(2,3)
static void path_prepend(char **path, const char *fmt, ...) {
--- a/src/udev/udev-event.c
+++ b/src/udev/udev-event.c
-@@ -34,6 +34,7 @@
+@@ -33,6 +33,7 @@
#include "udev-util.h"
#include "udev-watch.h"
#include "user-util.h"
@@ -570,7 +582,7 @@
sd_device *device;
--- a/src/udev/udev-rules.c
+++ b/src/udev/udev-rules.c
-@@ -30,6 +30,7 @@
+@@ -31,6 +31,7 @@
#include "udev-rules.h"
#include "user-util.h"
#include "virt.h"
@@ -578,13 +590,13 @@
#define RULES_DIRS (const char* const*) CONF_PATHS_STRV("udev/rules.d")
---- a/src/basic/mountpoint-util.c
-+++ b/src/basic/mountpoint-util.c
-@@ -10,6 +10,7 @@
- #include "fs-util.h"
- #include "missing_stat.h"
- #include "missing_syscall.h"
-+#include "missing_stdlib.h"
- #include "mountpoint-util.h"
+--- a/src/basic/percent-util.c
++++ b/src/basic/percent-util.c
+@@ -3,6 +3,7 @@
+ #include "percent-util.h"
+ #include "string-util.h"
#include "parse-util.h"
- #include "path-util.h"
++#include "missing_stdlib.h"
+
+ static int parse_parts_value_whole(const char *p, const char *symbol) {
+ const char *pc, *n;
diff --git a/poky/meta/recipes-core/systemd/systemd/0006-Include-netinet-if_ether.h.patch b/poky/meta/recipes-core/systemd/systemd/0006-Include-netinet-if_ether.h.patch
index a978558..54d7142 100644
--- a/poky/meta/recipes-core/systemd/systemd/0006-Include-netinet-if_ether.h.patch
+++ b/poky/meta/recipes-core/systemd/systemd/0006-Include-netinet-if_ether.h.patch
@@ -1,7 +1,7 @@
-From d3ed0da271738fd0fc3d3e4d82d6f5810334b05e Mon Sep 17 00:00:00 2001
+From 2069f0b0d5ab8f869aeba635a347e0b11d362b30 Mon Sep 17 00:00:00 2001
From: Khem Raj <raj.khem@gmail.com>
Date: Thu, 26 Oct 2017 22:10:42 -0700
-Subject: [PATCH 06/26] Include netinet/if_ether.h
+Subject: [PATCH] Include netinet/if_ether.h
Fixes
/path/to/systemd/recipe-sysroot/usr/include/netinet/if_ether.h:101:8: error: redefinition of 'struct ethhdr'
@@ -31,6 +31,7 @@
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
[rebased for systemd 247]
Signed-off-by: Luca Boccassi <luca.boccassi@microsoft.com>
+
---
src/libsystemd-network/sd-dhcp6-client.c | 1 -
src/libsystemd/sd-netlink/netlink-types.c | 1 +
@@ -56,7 +57,7 @@
21 files changed, 26 insertions(+), 8 deletions(-)
diff --git a/src/libsystemd-network/sd-dhcp6-client.c b/src/libsystemd-network/sd-dhcp6-client.c
-index 66f87c4b95..de1264ae46 100644
+index 410bfda10e..e70ed8be92 100644
--- a/src/libsystemd-network/sd-dhcp6-client.c
+++ b/src/libsystemd-network/sd-dhcp6-client.c
@@ -5,7 +5,6 @@
@@ -68,7 +69,7 @@
#include "sd-dhcp6-client.h"
diff --git a/src/libsystemd/sd-netlink/netlink-types.c b/src/libsystemd/sd-netlink/netlink-types.c
-index 6fb6c147d9..8eda02d202 100644
+index ed7b9a8cd1..112c0b09e4 100644
--- a/src/libsystemd/sd-netlink/netlink-types.c
+++ b/src/libsystemd/sd-netlink/netlink-types.c
@@ -3,6 +3,7 @@
@@ -80,7 +81,7 @@
#include <linux/netlink.h>
#include <linux/rtnetlink.h>
diff --git a/src/machine/machine-dbus.c b/src/machine/machine-dbus.c
-index bb67beb665..f5780f1aec 100644
+index e7c4ed3c7c..3a1e4f9072 100644
--- a/src/machine/machine-dbus.c
+++ b/src/machine/machine-dbus.c
@@ -3,6 +3,7 @@
@@ -92,7 +93,7 @@
/* When we include libgen.h because we need dirname() we immediately
* undefine basename() since libgen.h defines it as a macro to the POSIX
diff --git a/src/network/netdev/bond.c b/src/network/netdev/bond.c
-index e27f36067b..8868f1da5d 100644
+index cf7ca88d6f..34ab468191 100644
--- a/src/network/netdev/bond.c
+++ b/src/network/netdev/bond.c
@@ -1,5 +1,6 @@
@@ -103,7 +104,7 @@
#include "bond.h"
#include "bond-util.h"
diff --git a/src/network/netdev/bridge.c b/src/network/netdev/bridge.c
-index 1f59cd8b42..5fdbae7e99 100644
+index 38432f1578..79ccfe578e 100644
--- a/src/network/netdev/bridge.c
+++ b/src/network/netdev/bridge.c
@@ -1,5 +1,6 @@
@@ -114,7 +115,7 @@
#include "bridge.h"
diff --git a/src/network/netdev/macsec.c b/src/network/netdev/macsec.c
-index 82e71c3920..fbae86e216 100644
+index 77c5f8c4e7..04be1b4ab2 100644
--- a/src/network/netdev/macsec.c
+++ b/src/network/netdev/macsec.c
@@ -1,5 +1,6 @@
@@ -125,19 +126,19 @@
#include <linux/if_ether.h>
#include <linux/if_macsec.h>
diff --git a/src/network/netdev/netdev-gperf.gperf b/src/network/netdev/netdev-gperf.gperf
-index 4e89761f2c..91251fa6ec 100644
+index 8abe044890..3c54c58928 100644
--- a/src/network/netdev/netdev-gperf.gperf
+++ b/src/network/netdev/netdev-gperf.gperf
-@@ -2,6 +2,7 @@
+@@ -3,6 +3,7 @@
#if __GNUC__ >= 7
_Pragma("GCC diagnostic ignored \"-Wimplicit-fallthrough\"")
#endif
+#include <netinet/if_ether.h>
#include <stddef.h>
#include "bareudp.h"
- #include "bond.h"
+ #include "batadv.h"
diff --git a/src/network/netdev/netdev.c b/src/network/netdev/netdev.c
-index 9f390b5781..62aeafb1e4 100644
+index b31f0fa81a..c80e1ff537 100644
--- a/src/network/netdev/netdev.c
+++ b/src/network/netdev/netdev.c
@@ -1,5 +1,6 @@
@@ -148,7 +149,7 @@
#include <netinet/in.h>
#include <unistd.h>
diff --git a/src/network/networkd-brvlan.c b/src/network/networkd-brvlan.c
-index e53c73c30c..9bf0771b84 100644
+index 2847b336c9..4d6af8c642 100644
--- a/src/network/networkd-brvlan.c
+++ b/src/network/networkd-brvlan.c
@@ -4,6 +4,7 @@
@@ -160,7 +161,7 @@
#include <stdbool.h>
diff --git a/src/network/networkd-dhcp-common.c b/src/network/networkd-dhcp-common.c
-index 9f58121350..554d006cb8 100644
+index 00d055cf8d..65821c1d31 100644
--- a/src/network/networkd-dhcp-common.c
+++ b/src/network/networkd-dhcp-common.c
@@ -1,7 +1,8 @@
@@ -171,9 +172,9 @@
+#include <net/if_arp.h>
+#include <net/if.h>
+ #include "bus-error.h"
#include "dhcp-internal.h"
- #include "dhcp6-internal.h"
-@@ -10,6 +11,7 @@
+@@ -11,6 +12,7 @@
#include "networkd-dhcp-common.h"
#include "networkd-link.h"
#include "networkd-manager.h"
@@ -182,7 +183,7 @@
#include "parse-util.h"
#include "socket-util.h"
diff --git a/src/network/networkd-dhcp-server.c b/src/network/networkd-dhcp-server.c
-index cf279c640d..bae541029b 100644
+index 5cdf432c27..93cffb9863 100644
--- a/src/network/networkd-dhcp-server.c
+++ b/src/network/networkd-dhcp-server.c
@@ -1,8 +1,8 @@
@@ -197,7 +198,7 @@
#include "sd-dhcp-server.h"
diff --git a/src/network/networkd-dhcp4.c b/src/network/networkd-dhcp4.c
-index f3c1e5f609..e4ef6eca63 100644
+index 23dc3a45db..7ae6c2467a 100644
--- a/src/network/networkd-dhcp4.c
+++ b/src/network/networkd-dhcp4.c
@@ -1,9 +1,9 @@
@@ -212,7 +213,7 @@
#include "escape.h"
#include "alloc-util.h"
diff --git a/src/network/networkd-dhcp6.c b/src/network/networkd-dhcp6.c
-index 5c077c1ec8..fa98042aa5 100644
+index aa077d6219..4f6ce22059 100644
--- a/src/network/networkd-dhcp6.c
+++ b/src/network/networkd-dhcp6.c
@@ -3,9 +3,9 @@
@@ -227,7 +228,7 @@
#include "sd-dhcp6-client.h"
diff --git a/src/network/networkd-link.c b/src/network/networkd-link.c
-index 3bfe636691..e0c68c8ad3 100644
+index 8219d95b0d..c92230453b 100644
--- a/src/network/networkd-link.c
+++ b/src/network/networkd-link.c
@@ -1,8 +1,8 @@
@@ -241,7 +242,7 @@
#include <unistd.h>
diff --git a/src/network/networkd-network.c b/src/network/networkd-network.c
-index 3254641461..f0ada419fd 100644
+index e5ffd35b6f..871ebb32c6 100644
--- a/src/network/networkd-network.c
+++ b/src/network/networkd-network.c
@@ -1,5 +1,6 @@
@@ -252,7 +253,7 @@
#include <netinet/in.h>
#include <linux/netdevice.h>
diff --git a/src/network/networkd-route.c b/src/network/networkd-route.c
-index 0ed89584ef..e7e157c201 100644
+index a74541a6c9..a10549b336 100644
--- a/src/network/networkd-route.c
+++ b/src/network/networkd-route.c
@@ -1,7 +1,10 @@
@@ -268,7 +269,7 @@
#include "alloc-util.h"
#include "netlink-util.h"
diff --git a/src/network/test-network-tables.c b/src/network/test-network-tables.c
-index 475cac7527..9bae6eda16 100644
+index ce34449554..0b5dc01182 100644
--- a/src/network/test-network-tables.c
+++ b/src/network/test-network-tables.c
@@ -1,5 +1,6 @@
@@ -279,7 +280,7 @@
#include "dhcp6-internal.h"
#include "dhcp6-protocol.h"
diff --git a/src/shared/ethtool-util.c b/src/shared/ethtool-util.c
-index e6fab262f2..41dd3d7df7 100644
+index 654d36a83a..f4ed42d543 100644
--- a/src/shared/ethtool-util.c
+++ b/src/shared/ethtool-util.c
@@ -1,5 +1,6 @@
@@ -290,7 +291,7 @@
#include <sys/ioctl.h>
#include <linux/ethtool.h>
diff --git a/src/shared/ethtool-util.h b/src/shared/ethtool-util.h
-index f94b3e15bf..08a7e4fa09 100644
+index 11e2906681..a171df0737 100644
--- a/src/shared/ethtool-util.h
+++ b/src/shared/ethtool-util.h
@@ -3,6 +3,7 @@
@@ -302,7 +303,7 @@
#include "conf-parser.h"
diff --git a/src/udev/net/link-config.c b/src/udev/net/link-config.c
-index d12fd0e299..636806dc23 100644
+index 31e5d0cd67..f25f821364 100644
--- a/src/udev/net/link-config.c
+++ b/src/udev/net/link-config.c
@@ -1,5 +1,6 @@
@@ -323,6 +324,3 @@
#include "alloc-util.h"
#include "device-util.h"
#include "errno-util.h"
---
-2.25.1
-
diff --git a/poky/meta/recipes-core/systemd/systemd/0007-don-t-fail-if-GLOB_BRACE-and-GLOB_ALTDIRFUNC-is-not-.patch b/poky/meta/recipes-core/systemd/systemd/0007-don-t-fail-if-GLOB_BRACE-and-GLOB_ALTDIRFUNC-is-not-.patch
index 6865421..2ff08c7 100644
--- a/poky/meta/recipes-core/systemd/systemd/0007-don-t-fail-if-GLOB_BRACE-and-GLOB_ALTDIRFUNC-is-not-.patch
+++ b/poky/meta/recipes-core/systemd/systemd/0007-don-t-fail-if-GLOB_BRACE-and-GLOB_ALTDIRFUNC-is-not-.patch
@@ -1,8 +1,7 @@
-From 87a14dde13c8fa68239a4ab62914a093062b3b29 Mon Sep 17 00:00:00 2001
+From bca73ff2fbff2dc311040a87a4f536f89af07ad6 Mon Sep 17 00:00:00 2001
From: Chen Qi <Qi.Chen@windriver.com>
Date: Mon, 25 Feb 2019 14:56:21 +0800
-Subject: [PATCH 07/26] don't fail if GLOB_BRACE and GLOB_ALTDIRFUNC is not
- defined
+Subject: [PATCH] don't fail if GLOB_BRACE and GLOB_ALTDIRFUNC is not defined
If the standard library doesn't provide brace
expansion users just won't get it.
@@ -17,6 +16,7 @@
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
[rebased for systemd 243]
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
+
---
src/basic/glob-util.c | 12 ++++++++++++
src/test/test-glob-util.c | 16 ++++++++++++++++
@@ -115,10 +115,10 @@
(void) rm_rf(template, REMOVE_ROOT|REMOVE_PHYSICAL);
diff --git a/src/tmpfiles/tmpfiles.c b/src/tmpfiles/tmpfiles.c
-index 9906c70eef..5eb63b1d57 100644
+index 6b73d1e6d5..26b3b74275 100644
--- a/src/tmpfiles/tmpfiles.c
+++ b/src/tmpfiles/tmpfiles.c
-@@ -63,6 +63,12 @@
+@@ -66,6 +66,12 @@
#include "umask-util.h"
#include "user-util.h"
@@ -131,7 +131,7 @@
/* This reads all files listed in /etc/tmpfiles.d/?*.conf and creates
* them in the file system. This is intended to be used to create
* properly owned directories beneath /tmp, /var/tmp, /run, which are
-@@ -1936,7 +1942,9 @@ finish:
+@@ -1947,7 +1953,9 @@ finish:
static int glob_item(Item *i, action_t action) {
_cleanup_globfree_ glob_t g = {
@@ -141,7 +141,7 @@
};
int r = 0, k;
char **fn;
-@@ -1956,7 +1964,9 @@ static int glob_item(Item *i, action_t action) {
+@@ -1967,7 +1975,9 @@ static int glob_item(Item *i, action_t action) {
static int glob_item_recursively(Item *i, fdaction_t action) {
_cleanup_globfree_ glob_t g = {
@@ -151,6 +151,3 @@
};
int r = 0, k;
char **fn;
---
-2.27.0
-
diff --git a/poky/meta/recipes-core/systemd/systemd/0008-add-missing-FTW_-macros-for-musl.patch b/poky/meta/recipes-core/systemd/systemd/0008-add-missing-FTW_-macros-for-musl.patch
index 94cdc2e..142ca01 100644
--- a/poky/meta/recipes-core/systemd/systemd/0008-add-missing-FTW_-macros-for-musl.patch
+++ b/poky/meta/recipes-core/systemd/systemd/0008-add-missing-FTW_-macros-for-musl.patch
@@ -1,7 +1,7 @@
-From 8caea3fe87d55fd16de7d1b8266239fa954cb498 Mon Sep 17 00:00:00 2001
+From e0d1912f0246c97e5e7b4177691363d2d077e11d Mon Sep 17 00:00:00 2001
From: Chen Qi <Qi.Chen@windriver.com>
Date: Mon, 25 Feb 2019 15:00:06 +0800
-Subject: [PATCH 08/26] add missing FTW_ macros for musl
+Subject: [PATCH] add missing FTW_ macros for musl
This is to avoid build failures like below for musl.
@@ -10,6 +10,7 @@
Upstream-Status: Inappropriate [musl specific]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
+
---
src/basic/missing_type.h | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
@@ -42,6 +43,3 @@
+#ifndef FTW_SKIP_SIBLINGS
+#define FTW_SKIP_SIBLINGS 3
+#endif
---
-2.27.0
-
diff --git a/poky/meta/recipes-core/systemd/systemd/0009-fix-missing-of-__register_atfork-for-non-glibc-build.patch b/poky/meta/recipes-core/systemd/systemd/0009-fix-missing-of-__register_atfork-for-non-glibc-build.patch
index 76cc75c..53f0a1b 100644
--- a/poky/meta/recipes-core/systemd/systemd/0009-fix-missing-of-__register_atfork-for-non-glibc-build.patch
+++ b/poky/meta/recipes-core/systemd/systemd/0009-fix-missing-of-__register_atfork-for-non-glibc-build.patch
@@ -1,17 +1,18 @@
-From d8e4f0aa1760e4c7bb8476beecd35025c9cbb95a Mon Sep 17 00:00:00 2001
+From bb41fe773881a8f1d9615d388320b9c6fc47bfe5 Mon Sep 17 00:00:00 2001
From: Chen Qi <Qi.Chen@windriver.com>
Date: Mon, 25 Feb 2019 15:03:47 +0800
-Subject: [PATCH 09/26] fix missing of __register_atfork for non-glibc builds
+Subject: [PATCH] fix missing of __register_atfork for non-glibc builds
Upstream-Status: Inappropriate [musl specific]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
+
---
src/basic/process-util.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/src/basic/process-util.c b/src/basic/process-util.c
-index 0851613fc9..4417101569 100644
+index 7d4301eadb..caa9dfe3a3 100644
--- a/src/basic/process-util.c
+++ b/src/basic/process-util.c
@@ -18,6 +18,9 @@
@@ -24,7 +25,7 @@
#include "alloc-util.h"
#include "architecture.h"
-@@ -1143,11 +1146,15 @@ void reset_cached_pid(void) {
+@@ -1121,11 +1124,15 @@ void reset_cached_pid(void) {
cached_pid = CACHED_PID_UNSET;
}
@@ -40,6 +41,3 @@
pid_t getpid_cached(void) {
static bool installed = false;
---
-2.27.0
-
diff --git a/poky/meta/recipes-core/systemd/systemd/0010-Use-uintmax_t-for-handling-rlim_t.patch b/poky/meta/recipes-core/systemd/systemd/0010-Use-uintmax_t-for-handling-rlim_t.patch
index aeacd86..af1a6bb 100644
--- a/poky/meta/recipes-core/systemd/systemd/0010-Use-uintmax_t-for-handling-rlim_t.patch
+++ b/poky/meta/recipes-core/systemd/systemd/0010-Use-uintmax_t-for-handling-rlim_t.patch
@@ -1,7 +1,7 @@
-From e45bb02174812e4935214f42a18725be320770d5 Mon Sep 17 00:00:00 2001
+From dc40487e0ac26e3ca317429b9c3e8f01772de60a Mon Sep 17 00:00:00 2001
From: Chen Qi <Qi.Chen@windriver.com>
Date: Mon, 25 Feb 2019 15:12:41 +0800
-Subject: [PATCH 10/26] Use uintmax_t for handling rlim_t
+Subject: [PATCH] Use uintmax_t for handling rlim_t
PRIu{32,64} is not right format to represent rlim_t type
therefore use %ju and typecast the rlim_t variables to
@@ -20,6 +20,7 @@
Signed-off-by: Khem Raj <raj.khem@gmail.com>
[Rebased for v241]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
+
---
src/basic/format-util.h | 8 +-------
src/basic/rlimit-util.c | 10 +++++-----
@@ -46,10 +47,10 @@
#if SIZEOF_DEV_T == 8
# define DEV_FMT "%" PRIu64
diff --git a/src/basic/rlimit-util.c b/src/basic/rlimit-util.c
-index 880976312c..9e1b61cd4a 100644
+index 23d108d5df..94373c9422 100644
--- a/src/basic/rlimit-util.c
+++ b/src/basic/rlimit-util.c
-@@ -306,13 +306,13 @@ int rlimit_format(const struct rlimit *rl, char **ret) {
+@@ -308,13 +308,13 @@ int rlimit_format(const struct rlimit *rl, char **ret) {
if (rl->rlim_cur >= RLIM_INFINITY && rl->rlim_max >= RLIM_INFINITY)
s = strdup("infinity");
else if (rl->rlim_cur >= RLIM_INFINITY)
@@ -67,7 +68,7 @@
if (!s)
return -ENOMEM;
-@@ -403,7 +403,7 @@ int rlimit_nofile_safe(void) {
+@@ -405,7 +405,7 @@ int rlimit_nofile_safe(void) {
rl.rlim_cur = FD_SETSIZE;
if (setrlimit(RLIMIT_NOFILE, &rl) < 0)
@@ -77,10 +78,10 @@
return 1;
}
diff --git a/src/core/execute.c b/src/core/execute.c
-index 89632e0582..335283776c 100644
+index f82fc294c0..4696d055a8 100644
--- a/src/core/execute.c
+++ b/src/core/execute.c
-@@ -5288,9 +5288,9 @@ void exec_context_dump(const ExecContext *c, FILE* f, const char *prefix) {
+@@ -5370,9 +5370,9 @@ void exec_context_dump(const ExecContext *c, FILE* f, const char *prefix) {
for (unsigned i = 0; i < RLIM_NLIMITS; i++)
if (c->rlimit[i]) {
fprintf(f, "%sLimit%s: " RLIM_FMT "\n",
@@ -92,6 +93,3 @@
}
if (c->ioprio_set) {
---
-2.27.0
-
diff --git a/poky/meta/recipes-core/systemd/systemd/0011-test-sizeof.c-Disable-tests-for-missing-typedefs-in-.patch b/poky/meta/recipes-core/systemd/systemd/0011-test-sizeof.c-Disable-tests-for-missing-typedefs-in-.patch
index 6d7fdbc..b1d7827 100644
--- a/poky/meta/recipes-core/systemd/systemd/0011-test-sizeof.c-Disable-tests-for-missing-typedefs-in-.patch
+++ b/poky/meta/recipes-core/systemd/systemd/0011-test-sizeof.c-Disable-tests-for-missing-typedefs-in-.patch
@@ -1,13 +1,13 @@
-From d1db531ddd3bbf94d5e764b7917bcc8684ff6357 Mon Sep 17 00:00:00 2001
+From f8be7b283309e4332eedc088774daac637afef7b Mon Sep 17 00:00:00 2001
From: Chen Qi <Qi.Chen@windriver.com>
Date: Wed, 28 Feb 2018 21:25:22 -0800
-Subject: [PATCH 11/26] test-sizeof.c: Disable tests for missing typedefs in
- musl
+Subject: [PATCH] test-sizeof.c: Disable tests for missing typedefs in musl
Upstream-Status: Inappropriate [musl specific]
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
+
---
src/test/test-sizeof.c | 4 ++++
1 file changed, 4 insertions(+)
@@ -37,6 +37,3 @@
info(pid_t);
info(uid_t);
info(gid_t);
---
-2.27.0
-
diff --git a/poky/meta/recipes-core/systemd/systemd/0012-don-t-pass-AT_SYMLINK_NOFOLLOW-flag-to-faccessat.patch b/poky/meta/recipes-core/systemd/systemd/0012-don-t-pass-AT_SYMLINK_NOFOLLOW-flag-to-faccessat.patch
index c15b6e7..5f21787 100644
--- a/poky/meta/recipes-core/systemd/systemd/0012-don-t-pass-AT_SYMLINK_NOFOLLOW-flag-to-faccessat.patch
+++ b/poky/meta/recipes-core/systemd/systemd/0012-don-t-pass-AT_SYMLINK_NOFOLLOW-flag-to-faccessat.patch
@@ -1,7 +1,7 @@
-From 03e89da266edf70121a19ffc32a78cc3b97585ef Mon Sep 17 00:00:00 2001
+From 06915b70735caa66987af758ebdc4207757ae758 Mon Sep 17 00:00:00 2001
From: Andre McCurdy <armccurdy@gmail.com>
Date: Tue, 10 Oct 2017 14:33:30 -0700
-Subject: [PATCH 12/26] don't pass AT_SYMLINK_NOFOLLOW flag to faccessat()
+Subject: [PATCH] don't pass AT_SYMLINK_NOFOLLOW flag to faccessat()
Avoid using AT_SYMLINK_NOFOLLOW flag. It doesn't seem like the right
thing to do and it's not portable (not supported by musl). See:
@@ -25,20 +25,22 @@
Upstream-Status: Inappropriate [musl specific]
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
+
---
- src/basic/fs-util.h | 22 +++++++++++++++++++++-
+ src/basic/fs-util.h | 23 +++++++++++++++++++++--
src/shared/base-filesystem.c | 6 +++---
- 2 files changed, 24 insertions(+), 4 deletions(-)
+ 2 files changed, 24 insertions(+), 5 deletions(-)
diff --git a/src/basic/fs-util.h b/src/basic/fs-util.h
-index 5dc8853eac..0491b3dae2 100644
+index 027037f7a7..16eb379caf 100644
--- a/src/basic/fs-util.h
+++ b/src/basic/fs-util.h
-@@ -43,7 +43,27 @@ int futimens_opath(int fd, const struct timespec ts[2]);
+@@ -44,8 +44,27 @@ int futimens_opath(int fd, const struct timespec ts[2]);
int fd_warn_permissions(const char *path, int fd);
int stat_warn_permissions(const char *path, const struct stat *st);
--#define laccess(path, mode) faccessat(AT_FDCWD, (path), (mode), AT_SYMLINK_NOFOLLOW)
+-#define laccess(path, mode) \
+- (faccessat(AT_FDCWD, (path), (mode), AT_SYMLINK_NOFOLLOW) < 0 ? -errno : 0)
+/*
+ Avoid using AT_SYMLINK_NOFOLLOW flag. It doesn't seem like the right thing to
+ do and it's not portable (not supported by musl). See:
@@ -94,6 +96,3 @@
continue;
}
---
-2.27.0
-
diff --git a/poky/meta/recipes-core/systemd/systemd/0013-Define-glibc-compatible-basename-for-non-glibc-syste.patch b/poky/meta/recipes-core/systemd/systemd/0013-Define-glibc-compatible-basename-for-non-glibc-syste.patch
index 89736bc..51b1457 100644
--- a/poky/meta/recipes-core/systemd/systemd/0013-Define-glibc-compatible-basename-for-non-glibc-syste.patch
+++ b/poky/meta/recipes-core/systemd/systemd/0013-Define-glibc-compatible-basename-for-non-glibc-syste.patch
@@ -1,8 +1,7 @@
-From dd134880e9a16595ab473934577e873c748e9c7a Mon Sep 17 00:00:00 2001
+From 0c44af262cfa07c57db4b32de1f7610af47797f4 Mon Sep 17 00:00:00 2001
From: Khem Raj <raj.khem@gmail.com>
Date: Sun, 27 May 2018 08:36:44 -0700
-Subject: [PATCH 13/26] Define glibc compatible basename() for non-glibc
- systems
+Subject: [PATCH] Define glibc compatible basename() for non-glibc systems
Fixes builds with musl, even though systemd is adamant about
using non-posix basename implementation, we have a way out
@@ -10,12 +9,13 @@
Upstream-Status: Inappropriate [musl specific]
Signed-off-by: Khem Raj <raj.khem@gmail.com>
+
---
src/machine/machine-dbus.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/src/machine/machine-dbus.c b/src/machine/machine-dbus.c
-index f5780f1aec..aec5825b3e 100644
+index 3a1e4f9072..ab87b9882c 100644
--- a/src/machine/machine-dbus.c
+++ b/src/machine/machine-dbus.c
@@ -11,6 +11,11 @@
@@ -30,6 +30,3 @@
#include "alloc-util.h"
#include "bus-common-errors.h"
#include "bus-get-properties.h"
---
-2.27.0
-
diff --git a/poky/meta/recipes-core/systemd/systemd/0014-Do-not-disable-buffering-when-writing-to-oom_score_a.patch b/poky/meta/recipes-core/systemd/systemd/0014-Do-not-disable-buffering-when-writing-to-oom_score_a.patch
index e95d2ae..7444d43 100644
--- a/poky/meta/recipes-core/systemd/systemd/0014-Do-not-disable-buffering-when-writing-to-oom_score_a.patch
+++ b/poky/meta/recipes-core/systemd/systemd/0014-Do-not-disable-buffering-when-writing-to-oom_score_a.patch
@@ -1,7 +1,7 @@
-From 55af446156da863b5b36a1109845858956a4c274 Mon Sep 17 00:00:00 2001
+From 0f4b60e34a806055c678eb97a7ec7e21291bcf48 Mon Sep 17 00:00:00 2001
From: Chen Qi <Qi.Chen@windriver.com>
Date: Wed, 4 Jul 2018 15:00:44 +0800
-Subject: [PATCH 14/26] Do not disable buffering when writing to oom_score_adj
+Subject: [PATCH] Do not disable buffering when writing to oom_score_adj
On musl, disabling buffering when writing to oom_score_adj will
cause the following error.
@@ -19,15 +19,16 @@
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
[rebased for systemd 243]
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
+
---
src/basic/process-util.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/src/basic/process-util.c b/src/basic/process-util.c
-index 4417101569..556dab8ebf 100644
+index caa9dfe3a3..6101f43db5 100644
--- a/src/basic/process-util.c
+++ b/src/basic/process-util.c
-@@ -1536,7 +1536,7 @@ int set_oom_score_adjust(int value) {
+@@ -1523,7 +1523,7 @@ int set_oom_score_adjust(int value) {
sprintf(t, "%i", value);
return write_string_file("/proc/self/oom_score_adj", t,
@@ -36,6 +37,3 @@
}
int pidfd_get_pid(int fd, pid_t *ret) {
---
-2.27.0
-
diff --git a/poky/meta/recipes-core/systemd/systemd/0015-distinguish-XSI-compliant-strerror_r-from-GNU-specif.patch b/poky/meta/recipes-core/systemd/systemd/0015-distinguish-XSI-compliant-strerror_r-from-GNU-specif.patch
index 5cdcf84..90cc70d 100644
--- a/poky/meta/recipes-core/systemd/systemd/0015-distinguish-XSI-compliant-strerror_r-from-GNU-specif.patch
+++ b/poky/meta/recipes-core/systemd/systemd/0015-distinguish-XSI-compliant-strerror_r-from-GNU-specif.patch
@@ -1,7 +1,7 @@
-From e382845aed90cfe4496a8351d57d4466dd2e9a9c Mon Sep 17 00:00:00 2001
+From c30ab62d18ce88187f5eb6c236e0977c9337f68d Mon Sep 17 00:00:00 2001
From: Chen Qi <Qi.Chen@windriver.com>
Date: Tue, 10 Jul 2018 15:40:17 +0800
-Subject: [PATCH 15/26] distinguish XSI-compliant strerror_r from GNU-specifi
+Subject: [PATCH] distinguish XSI-compliant strerror_r from GNU-specifi
strerror_r
XSI-compliant strerror_r and GNU-specifi strerror_r are different.
@@ -18,28 +18,12 @@
Upstream-Status: Inappropriate [musl specific]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
+
---
- src/journal/journal-send.c | 5 +++++
- src/libsystemd/sd-bus/bus-error.c | 5 +++++
+ src/libsystemd/sd-bus/bus-error.c | 5 +++++
+ src/libsystemd/sd-journal/journal-send.c | 5 +++++
2 files changed, 10 insertions(+)
-diff --git a/src/journal/journal-send.c b/src/journal/journal-send.c
-index e8e6ad555b..8ca5271d02 100644
---- a/src/journal/journal-send.c
-+++ b/src/journal/journal-send.c
-@@ -348,7 +348,12 @@ static int fill_iovec_perror_and_send(const char *message, int skip, struct iove
- char* j;
-
- errno = 0;
-+#ifndef __GLIBC__
-+ strerror_r(_saved_errno_, buffer + 8 + k, n - 8 - k);
-+ j = buffer + 8 + k;
-+#else
- j = strerror_r(_saved_errno_, buffer + 8 + k, n - 8 - k);
-+#endif
- if (errno == 0) {
- char error[STRLEN("ERRNO=") + DECIMAL_STR_MAX(int) + 1];
-
diff --git a/src/libsystemd/sd-bus/bus-error.c b/src/libsystemd/sd-bus/bus-error.c
index 8da2024a50..9605a9b869 100644
--- a/src/libsystemd/sd-bus/bus-error.c
@@ -57,6 +41,20 @@
if (errno == ERANGE || strlen(x) >= k - 1) {
free(m);
k *= 2;
---
-2.27.0
-
+diff --git a/src/libsystemd/sd-journal/journal-send.c b/src/libsystemd/sd-journal/journal-send.c
+index e8e6ad555b..8ca5271d02 100644
+--- a/src/libsystemd/sd-journal/journal-send.c
++++ b/src/libsystemd/sd-journal/journal-send.c
+@@ -348,7 +348,12 @@ static int fill_iovec_perror_and_send(const char *message, int skip, struct iove
+ char* j;
+
+ errno = 0;
++#ifndef __GLIBC__
++ strerror_r(_saved_errno_, buffer + 8 + k, n - 8 - k);
++ j = buffer + 8 + k;
++#else
+ j = strerror_r(_saved_errno_, buffer + 8 + k, n - 8 - k);
++#endif
+ if (errno == 0) {
+ char error[STRLEN("ERRNO=") + DECIMAL_STR_MAX(int) + 1];
+
diff --git a/poky/meta/recipes-core/systemd/systemd/0016-Hide-__start_BUS_ERROR_MAP-and-__stop_BUS_ERROR_MAP.patch b/poky/meta/recipes-core/systemd/systemd/0016-Hide-__start_BUS_ERROR_MAP-and-__stop_BUS_ERROR_MAP.patch
index 9a125de..de7f9ec 100644
--- a/poky/meta/recipes-core/systemd/systemd/0016-Hide-__start_BUS_ERROR_MAP-and-__stop_BUS_ERROR_MAP.patch
+++ b/poky/meta/recipes-core/systemd/systemd/0016-Hide-__start_BUS_ERROR_MAP-and-__stop_BUS_ERROR_MAP.patch
@@ -1,7 +1,7 @@
-From 0c7af5f288231a8c0545e169e01ba5ee173cafe7 Mon Sep 17 00:00:00 2001
+From fa86e5578256dddb296fd30128929ea7c4b792a4 Mon Sep 17 00:00:00 2001
From: Chen Qi <Qi.Chen@windriver.com>
Date: Mon, 25 Feb 2019 15:18:00 +0800
-Subject: [PATCH 16/26] Hide __start_BUS_ERROR_MAP and __stop_BUS_ERROR_MAP
+Subject: [PATCH] Hide __start_BUS_ERROR_MAP and __stop_BUS_ERROR_MAP
for currently unknown reasons they get exported to the shared libries
even without being listed in the sym file
@@ -11,6 +11,7 @@
Signed-off-by: Khem Raj <raj.khem@gmail.com>
[Rebased for v241]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
+
---
src/libsystemd/sd-bus/bus-error.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
@@ -30,6 +31,3 @@
/* Additional maps registered with sd_bus_error_add_map() are in this
* NULL terminated array */
---
-2.27.0
-
diff --git a/poky/meta/recipes-core/systemd/systemd/0017-missing_type.h-add-__compar_d_fn_t-definition.patch b/poky/meta/recipes-core/systemd/systemd/0017-missing_type.h-add-__compar_d_fn_t-definition.patch
index 31747c6..d9ef2b8 100644
--- a/poky/meta/recipes-core/systemd/systemd/0017-missing_type.h-add-__compar_d_fn_t-definition.patch
+++ b/poky/meta/recipes-core/systemd/systemd/0017-missing_type.h-add-__compar_d_fn_t-definition.patch
@@ -1,7 +1,7 @@
-From 32dd7a47b87793cd836ab4bb776d1524f24c2d58 Mon Sep 17 00:00:00 2001
+From 11e730694706fa354a0e43c588ef66677a777d9a Mon Sep 17 00:00:00 2001
From: Chen Qi <Qi.Chen@windriver.com>
Date: Mon, 25 Feb 2019 15:27:54 +0800
-Subject: [PATCH 17/26] missing_type.h: add __compar_d_fn_t definition
+Subject: [PATCH] missing_type.h: add __compar_d_fn_t definition
Fix the following compile failure:
src/basic/util.h:71:18: error: unknown type name '__compar_d_fn_t'; did you mean '__compar_fn_t'?
@@ -9,6 +9,7 @@
Upstream-Status: Inappropriate [musl specific]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
+
---
src/basic/missing_type.h | 1 +
1 file changed, 1 insertion(+)
@@ -25,6 +26,3 @@
#endif
#ifndef __COMPAR_FN_T
---
-2.27.0
-
diff --git a/poky/meta/recipes-core/systemd/systemd/0018-avoid-redefinition-of-prctl_mm_map-structure.patch b/poky/meta/recipes-core/systemd/systemd/0018-avoid-redefinition-of-prctl_mm_map-structure.patch
index 56d361a..3b60854 100644
--- a/poky/meta/recipes-core/systemd/systemd/0018-avoid-redefinition-of-prctl_mm_map-structure.patch
+++ b/poky/meta/recipes-core/systemd/systemd/0018-avoid-redefinition-of-prctl_mm_map-structure.patch
@@ -1,7 +1,7 @@
-From bfc3416edeb69082ac9b9c9e844f12d7b45bb006 Mon Sep 17 00:00:00 2001
+From 45bae28d3da6607d33d54f4b30a500f5249aadde Mon Sep 17 00:00:00 2001
From: Chen Qi <Qi.Chen@windriver.com>
Date: Mon, 25 Feb 2019 15:44:54 +0800
-Subject: [PATCH 18/26] avoid redefinition of prctl_mm_map structure
+Subject: [PATCH] avoid redefinition of prctl_mm_map structure
Fix the following compile failure:
error: redefinition of 'struct prctl_mm_map'
@@ -9,6 +9,7 @@
Upstream-Status: Inappropriate [musl specific]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
+
---
src/basic/missing_prctl.h | 2 ++
1 file changed, 2 insertions(+)
@@ -27,6 +28,3 @@
/* 58319057b7847667f0c9585b9de0e8932b0fdb08 (4.3) */
#ifndef PR_CAP_AMBIENT
---
-2.27.0
-
diff --git a/poky/meta/recipes-core/systemd/systemd/0019-Handle-missing-LOCK_EX.patch b/poky/meta/recipes-core/systemd/systemd/0019-Handle-missing-LOCK_EX.patch
index 6ca1964..7d6433f 100644
--- a/poky/meta/recipes-core/systemd/systemd/0019-Handle-missing-LOCK_EX.patch
+++ b/poky/meta/recipes-core/systemd/systemd/0019-Handle-missing-LOCK_EX.patch
@@ -1,16 +1,17 @@
-From e427f03de2c56e868bb0f24aa231315b2dae1b71 Mon Sep 17 00:00:00 2001
+From 6e593ff2afbe4bfe15eee2ec34e51490a38462f5 Mon Sep 17 00:00:00 2001
From: Alex Kiernan <alex.kiernan@gmail.com>
Date: Fri, 7 Aug 2020 15:19:27 +0000
-Subject: [PATCH 19/26] Handle missing LOCK_EX
+Subject: [PATCH] Handle missing LOCK_EX
Upstream-Status: Inappropriate [musl specific]
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
+
---
src/partition/makefs.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/src/partition/makefs.c b/src/partition/makefs.c
-index fd924d2231..b97580fdcc 100644
+index 7c94fbfedb..42f966722d 100644
--- a/src/partition/makefs.c
+++ b/src/partition/makefs.c
@@ -6,6 +6,7 @@
@@ -21,6 +22,3 @@
#include "alloc-util.h"
#include "blockdev-util.h"
---
-2.27.0
-
diff --git a/poky/meta/recipes-core/systemd/systemd/0020-Fix-incompatible-pointer-type-struct-sockaddr_un.patch b/poky/meta/recipes-core/systemd/systemd/0020-Fix-incompatible-pointer-type-struct-sockaddr_un.patch
index f74de43..1faee1c 100644
--- a/poky/meta/recipes-core/systemd/systemd/0020-Fix-incompatible-pointer-type-struct-sockaddr_un.patch
+++ b/poky/meta/recipes-core/systemd/systemd/0020-Fix-incompatible-pointer-type-struct-sockaddr_un.patch
@@ -1,7 +1,7 @@
-From 9abbc5e69e21aef0d4d4567e69302fa660b76c53 Mon Sep 17 00:00:00 2001
+From ac579b296aa29c2f1dad9425c6d795e154ec8f7c Mon Sep 17 00:00:00 2001
From: Alex Kiernan <alex.kiernan@gmail.com>
Date: Fri, 7 Aug 2020 15:20:17 +0000
-Subject: [PATCH 20/26] Fix incompatible pointer type struct sockaddr_un *
+Subject: [PATCH] Fix incompatible pointer type struct sockaddr_un *
| ../../../../../../workspace/sources/systemd/src/nspawn/nspawn.c: In function 'cant_be_in_netns':
| ../../../../../../workspace/sources/systemd/src/nspawn/nspawn.c:4893:25: error: passing argument 2 of 'connect' from incompatible pointer type [-Werror=incompatible-pointer-types]
@@ -18,15 +18,16 @@
Upstream-Status: Inappropriate [musl specific]
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
+
---
src/nspawn/nspawn.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/src/nspawn/nspawn.c b/src/nspawn/nspawn.c
-index 0842731c18..3528b7ff14 100644
+index a4ac8ed2bb..0c41a48d4b 100644
--- a/src/nspawn/nspawn.c
+++ b/src/nspawn/nspawn.c
-@@ -5084,7 +5084,7 @@ static int cant_be_in_netns(void) {
+@@ -5125,7 +5125,7 @@ static int cant_be_in_netns(void) {
if (fd < 0)
return log_error_errno(errno, "Failed to allocate udev control socket: %m");
@@ -35,6 +36,3 @@
if (errno == ENOENT || ERRNO_IS_DISCONNECT(errno))
return log_error_errno(SYNTHETIC_ERRNO(EOPNOTSUPP),
---
-2.27.0
-
diff --git a/poky/meta/recipes-core/systemd/systemd/0021-test-json.c-define-M_PIl.patch b/poky/meta/recipes-core/systemd/systemd/0021-test-json.c-define-M_PIl.patch
index fa6652a..14c8ff7 100644
--- a/poky/meta/recipes-core/systemd/systemd/0021-test-json.c-define-M_PIl.patch
+++ b/poky/meta/recipes-core/systemd/systemd/0021-test-json.c-define-M_PIl.patch
@@ -1,7 +1,7 @@
-From 1f5bc54bed0b365e7e448c26f6c792dbe8b3b198 Mon Sep 17 00:00:00 2001
+From 6bc78df50adb48d24a2abfdf65b44b932cc5a571 Mon Sep 17 00:00:00 2001
From: Chen Qi <Qi.Chen@windriver.com>
Date: Mon, 25 Feb 2019 16:53:06 +0800
-Subject: [PATCH 21/26] test-json.c: define M_PIl
+Subject: [PATCH] test-json.c: define M_PIl
Fix the following compile failure:
src/test/test-json.c:305:50: error: 'M_PIl' undeclared (first use in this function); did you mean 'M_PI'?
@@ -9,6 +9,7 @@
Upstream-Status: Inappropriate [musl specific]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
+
---
src/test/test-json.c | 4 ++++
1 file changed, 4 insertions(+)
@@ -28,6 +29,3 @@
static void test_tokenizer(const char *data, ...) {
unsigned line = 0, column = 0;
void *state = NULL;
---
-2.27.0
-
diff --git a/poky/meta/recipes-core/systemd/systemd/0022-do-not-disable-buffer-in-writing-files.patch b/poky/meta/recipes-core/systemd/systemd/0022-do-not-disable-buffer-in-writing-files.patch
index 675fd20..bd627c5 100644
--- a/poky/meta/recipes-core/systemd/systemd/0022-do-not-disable-buffer-in-writing-files.patch
+++ b/poky/meta/recipes-core/systemd/systemd/0022-do-not-disable-buffer-in-writing-files.patch
@@ -1,7 +1,7 @@
-From 564dba5ad0cd884e3f69fa19ca64095413578ea5 Mon Sep 17 00:00:00 2001
+From 7cb6579572b50ef44bc0a321a4c73cce55b0c2f2 Mon Sep 17 00:00:00 2001
From: Chen Qi <Qi.Chen@windriver.com>
Date: Fri, 1 Mar 2019 15:22:15 +0800
-Subject: [PATCH 22/26] do not disable buffer in writing files
+Subject: [PATCH] do not disable buffer in writing files
Do not disable buffer in writing files, otherwise we get
failure at boot for musl like below.
@@ -18,10 +18,12 @@
Signed-off-by: Andrej Valek <andrej.valek@siemens.com>
[rebased for systemd 243]
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
+
---
src/basic/cgroup-util.c | 10 +++++-----
src/basic/procfs-util.c | 4 ++--
src/basic/smack-util.c | 2 +-
+ src/basic/sysctl-util.c | 2 +-
src/basic/util.c | 2 +-
src/binfmt/binfmt.c | 6 +++---
src/core/main.c | 4 ++--
@@ -32,18 +34,15 @@
src/nspawn/nspawn-cgroup.c | 2 +-
src/nspawn/nspawn.c | 6 +++---
src/shared/cgroup-setup.c | 4 ++--
- src/shared/sysctl-util.c | 2 +-
src/sleep/sleep.c | 8 ++++----
- src/udev/udevadm-trigger.c | 2 +-
- src/udev/udevd.c | 2 +-
src/vconsole/vconsole-setup.c | 2 +-
- 18 files changed, 35 insertions(+), 35 deletions(-)
+ 16 files changed, 33 insertions(+), 33 deletions(-)
diff --git a/src/basic/cgroup-util.c b/src/basic/cgroup-util.c
-index bb960f183c..cb804c5f4b 100644
+index 50c1ae1b2b..5b40e92163 100644
--- a/src/basic/cgroup-util.c
+++ b/src/basic/cgroup-util.c
-@@ -759,7 +759,7 @@ int cg_install_release_agent(const char *controller, const char *agent) {
+@@ -765,7 +765,7 @@ int cg_install_release_agent(const char *controller, const char *agent) {
sc = strstrip(contents);
if (isempty(sc)) {
@@ -52,7 +51,7 @@
if (r < 0)
return r;
} else if (!path_equal(sc, agent))
-@@ -777,7 +777,7 @@ int cg_install_release_agent(const char *controller, const char *agent) {
+@@ -783,7 +783,7 @@ int cg_install_release_agent(const char *controller, const char *agent) {
sc = strstrip(contents);
if (streq(sc, "0")) {
@@ -61,7 +60,7 @@
if (r < 0)
return r;
-@@ -804,7 +804,7 @@ int cg_uninstall_release_agent(const char *controller) {
+@@ -810,7 +810,7 @@ int cg_uninstall_release_agent(const char *controller) {
if (r < 0)
return r;
@@ -70,7 +69,7 @@
if (r < 0)
return r;
-@@ -814,7 +814,7 @@ int cg_uninstall_release_agent(const char *controller) {
+@@ -820,7 +820,7 @@ int cg_uninstall_release_agent(const char *controller) {
if (r < 0)
return r;
@@ -79,7 +78,7 @@
if (r < 0)
return r;
-@@ -1646,7 +1646,7 @@ int cg_set_attribute(const char *controller, const char *path, const char *attri
+@@ -1650,7 +1650,7 @@ int cg_set_attribute(const char *controller, const char *path, const char *attri
if (r < 0)
return r;
@@ -121,11 +120,24 @@
if (r < 0)
return r;
+diff --git a/src/basic/sysctl-util.c b/src/basic/sysctl-util.c
+index c96b5cd77f..d2476d9665 100644
+--- a/src/basic/sysctl-util.c
++++ b/src/basic/sysctl-util.c
+@@ -93,7 +93,7 @@ int sysctl_write_ip_property(int af, const char *ifname, const char *property, c
+
+ log_debug("Setting '%s' to '%s'", p, value);
+
+- return write_string_file(p, value, WRITE_STRING_FILE_VERIFY_ON_FAILURE | WRITE_STRING_FILE_DISABLE_BUFFER);
++ return write_string_file(p, value, WRITE_STRING_FILE_VERIFY_ON_FAILURE | 0);
+ }
+
+ int sysctl_read(const char *property, char **ret) {
diff --git a/src/basic/util.c b/src/basic/util.c
-index f98ecf3858..13e0f7431f 100644
+index 955b18bd2a..6d89c90176 100644
--- a/src/basic/util.c
+++ b/src/basic/util.c
-@@ -267,7 +267,7 @@ void disable_coredumps(void) {
+@@ -234,7 +234,7 @@ void disable_coredumps(void) {
if (detect_container() > 0)
return;
@@ -135,7 +147,7 @@
log_debug_errno(r, "Failed to turn off coredumps, ignoring: %m");
}
diff --git a/src/binfmt/binfmt.c b/src/binfmt/binfmt.c
-index 43ed2f385b..37a6f578f7 100644
+index f6b72e0bae..e9fd4d06be 100644
--- a/src/binfmt/binfmt.c
+++ b/src/binfmt/binfmt.c
@@ -48,7 +48,7 @@ static int delete_rule(const char *rule) {
@@ -156,7 +168,7 @@
if (r < 0)
return log_error_errno(r, "Failed to add binary format: %m");
-@@ -223,7 +223,7 @@ static int run(int argc, char *argv[]) {
+@@ -222,7 +222,7 @@ static int run(int argc, char *argv[]) {
}
/* Flush out all rules */
@@ -166,10 +178,10 @@
STRV_FOREACH(f, files) {
k = apply_file(*f, true);
diff --git a/src/core/main.c b/src/core/main.c
-index a280b756ff..334532cd42 100644
+index 3ee8d0a869..ec36e3e80f 100644
--- a/src/core/main.c
+++ b/src/core/main.c
-@@ -1382,7 +1382,7 @@ static int bump_unix_max_dgram_qlen(void) {
+@@ -1401,7 +1401,7 @@ static int bump_unix_max_dgram_qlen(void) {
if (v >= DEFAULT_UNIX_MAX_DGRAM_QLEN)
return 0;
@@ -178,7 +190,7 @@
if (r < 0)
return log_full_errno(IN_SET(r, -EROFS, -EPERM, -EACCES) ? LOG_DEBUG : LOG_WARNING, r,
"Failed to bump AF_UNIX datagram queue length, ignoring: %m");
-@@ -1666,7 +1666,7 @@ static void initialize_core_pattern(bool skip_setup) {
+@@ -1678,7 +1678,7 @@ static void initialize_core_pattern(bool skip_setup) {
if (getpid_cached() != 1)
return;
@@ -188,7 +200,7 @@
log_warning_errno(r, "Failed to write '%s' to /proc/sys/kernel/core_pattern, ignoring: %m", arg_early_core_pattern);
}
diff --git a/src/core/smack-setup.c b/src/core/smack-setup.c
-index 1fe592af70..603942a000 100644
+index 8cc1696a4f..ab7b4ba2c3 100644
--- a/src/core/smack-setup.c
+++ b/src/core/smack-setup.c
@@ -325,17 +325,17 @@ int mac_smack_setup(bool *loaded_policy) {
@@ -214,7 +226,7 @@
log_warning_errno(r, "Failed to set SMACK netlabel rule \"127.0.0.1 -CIPSO\": %m");
#endif
diff --git a/src/hibernate-resume/hibernate-resume.c b/src/hibernate-resume/hibernate-resume.c
-index d8f91f4e66..a088e6e2d8 100644
+index 58e35e403e..1d0beb4008 100644
--- a/src/hibernate-resume/hibernate-resume.c
+++ b/src/hibernate-resume/hibernate-resume.c
@@ -45,7 +45,7 @@ int main(int argc, char *argv[]) {
@@ -227,20 +239,20 @@
log_error_errno(r, "Failed to write '%s' to /sys/power/resume: %m", major_minor);
return EXIT_FAILURE;
diff --git a/src/libsystemd/sd-device/sd-device.c b/src/libsystemd/sd-device/sd-device.c
-index d06f90ce1d..43d0a58750 100644
+index d82f01a164..b8fd63346c 100644
--- a/src/libsystemd/sd-device/sd-device.c
+++ b/src/libsystemd/sd-device/sd-device.c
-@@ -1976,7 +1976,7 @@ _public_ int sd_device_set_sysattr_value(sd_device *device, const char *sysattr,
+@@ -1987,7 +1987,7 @@ _public_ int sd_device_set_sysattr_value(sd_device *device, const char *sysattr,
if (!value)
return -ENOMEM;
- r = write_string_file(path, value, WRITE_STRING_FILE_DISABLE_BUFFER | WRITE_STRING_FILE_NOFOLLOW);
+ r = write_string_file(path, value, 0 | WRITE_STRING_FILE_NOFOLLOW);
if (r < 0) {
- if (r == -ELOOP)
- return -EINVAL;
+ /* On failure, clear cache entry, as we do not know how it fails. */
+ device_remove_cached_sysattr_value(device, sysattr);
diff --git a/src/login/logind-dbus.c b/src/login/logind-dbus.c
-index 7d757aa286..a5d9da5b7e 100644
+index 3bc424b83b..5f5eef0843 100644
--- a/src/login/logind-dbus.c
+++ b/src/login/logind-dbus.c
@@ -1330,7 +1330,7 @@ static int trigger_device(Manager *m, sd_device *d) {
@@ -266,10 +278,10 @@
log_error_errno(r, "Failed to move process: %m");
goto finish;
diff --git a/src/nspawn/nspawn.c b/src/nspawn/nspawn.c
-index 3528b7ff14..11b0c20f95 100644
+index 0c41a48d4b..9c893b18e4 100644
--- a/src/nspawn/nspawn.c
+++ b/src/nspawn/nspawn.c
-@@ -2667,7 +2667,7 @@ static int reset_audit_loginuid(void) {
+@@ -2695,7 +2695,7 @@ static int reset_audit_loginuid(void) {
if (streq(p, "4294967295"))
return 0;
@@ -278,7 +290,7 @@
if (r < 0) {
log_error_errno(r,
"Failed to reset audit login UID. This probably means that your kernel is too\n"
-@@ -3920,13 +3920,13 @@ static int setup_uid_map(pid_t pid) {
+@@ -3948,13 +3948,13 @@ static int setup_uid_map(pid_t pid) {
xsprintf(uid_map, "/proc/" PID_FMT "/uid_map", pid);
xsprintf(line, UID_FMT " " UID_FMT " " UID_FMT "\n", 0, arg_uid_shift, arg_uid_range);
@@ -316,21 +328,8 @@
if (r < 0) {
log_debug_errno(r, "Failed to %s controller %s for %s (%s): %m",
FLAGS_SET(mask, bit) ? "enable" : "disable", n, p, fs);
-diff --git a/src/shared/sysctl-util.c b/src/shared/sysctl-util.c
-index 670c33108b..7c7c3dcfb6 100644
---- a/src/shared/sysctl-util.c
-+++ b/src/shared/sysctl-util.c
-@@ -93,7 +93,7 @@ int sysctl_write_ip_property(int af, const char *ifname, const char *property, c
-
- log_debug("Setting '%s' to '%s'", p, value);
-
-- return write_string_file(p, value, WRITE_STRING_FILE_VERIFY_ON_FAILURE | WRITE_STRING_FILE_DISABLE_BUFFER);
-+ return write_string_file(p, value, WRITE_STRING_FILE_VERIFY_ON_FAILURE | 0);
- }
-
- int sysctl_read(const char *property, char **content) {
diff --git a/src/sleep/sleep.c b/src/sleep/sleep.c
-index 39ab554290..d0e566645d 100644
+index 262d4cea66..0523e8dc9b 100644
--- a/src/sleep/sleep.c
+++ b/src/sleep/sleep.c
@@ -48,7 +48,7 @@ static int write_hibernate_location_info(const HibernateLocation *hibernate_loca
@@ -369,34 +368,8 @@
if (k >= 0)
return 0;
log_debug_errno(k, "Failed to write '%s' to /sys/power/state: %m", *state);
-diff --git a/src/udev/udevadm-trigger.c b/src/udev/udevadm-trigger.c
-index 5c74184c33..65f528314e 100644
---- a/src/udev/udevadm-trigger.c
-+++ b/src/udev/udevadm-trigger.c
-@@ -43,7 +43,7 @@ static int exec_list(sd_device_enumerator *e, const char *action, Set **settle_s
- if (!filename)
- return log_oom();
-
-- r = write_string_file(filename, action, WRITE_STRING_FILE_DISABLE_BUFFER);
-+ r = write_string_file(filename, action, 0);
- if (r < 0) {
- bool ignore = IN_SET(r, -ENOENT, -ENODEV);
-
-diff --git a/src/udev/udevd.c b/src/udev/udevd.c
-index d24b8d4398..d123a43904 100644
---- a/src/udev/udevd.c
-+++ b/src/udev/udevd.c
-@@ -1192,7 +1192,7 @@ static int synthesize_change_one(sd_device *dev, const char *syspath) {
-
- filename = strjoina(syspath, "/uevent");
- log_device_debug(dev, "device is closed, synthesising 'change' on %s", syspath);
-- r = write_string_file(filename, "change", WRITE_STRING_FILE_DISABLE_BUFFER);
-+ r = write_string_file(filename, "change", 0);
- if (r < 0)
- return log_device_debug_errno(dev, r, "Failed to write 'change' to %s: %m", filename);
- return 0;
diff --git a/src/vconsole/vconsole-setup.c b/src/vconsole/vconsole-setup.c
-index b28e2853e1..115b7233a0 100644
+index d1c3febdd5..1cc68694d1 100644
--- a/src/vconsole/vconsole-setup.c
+++ b/src/vconsole/vconsole-setup.c
@@ -116,7 +116,7 @@ static int toggle_utf8_vc(const char *name, int fd, bool utf8) {
@@ -408,6 +381,3 @@
if (r < 0)
return log_warning_errno(r, "Failed to %s sysfs UTF-8 flag: %m", enable_disable(utf8));
---
-2.27.0
-
diff --git a/poky/meta/recipes-core/systemd/systemd/0025-Handle-__cpu_mask-usage.patch b/poky/meta/recipes-core/systemd/systemd/0025-Handle-__cpu_mask-usage.patch
index 1cc3985..7d1bd60 100644
--- a/poky/meta/recipes-core/systemd/systemd/0025-Handle-__cpu_mask-usage.patch
+++ b/poky/meta/recipes-core/systemd/systemd/0025-Handle-__cpu_mask-usage.patch
@@ -1,7 +1,7 @@
-From bbda4a48a34662393117fc677c3a678d4ce4c2ec Mon Sep 17 00:00:00 2001
+From d73755cc60f401f0f20f357752e45aeeeef8e83f Mon Sep 17 00:00:00 2001
From: Scott Murray <scott.murray@konsulko.com>
Date: Fri, 13 Sep 2019 19:26:27 -0400
-Subject: [PATCH 25/26] Handle __cpu_mask usage
+Subject: [PATCH] Handle __cpu_mask usage
Fixes errors:
@@ -18,6 +18,7 @@
Upstream-Status: Inappropriate [musl specific]
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
+
---
src/shared/cpu-set-util.h | 2 ++
src/test/test-sizeof.c | 2 +-
@@ -55,6 +56,3 @@
/* Print information about various types. Useful when diagnosing
* gcc diagnostics on an unfamiliar architecture. */
---
-2.27.0
-
diff --git a/poky/meta/recipes-core/systemd/systemd/0026-Handle-missing-gshadow.patch b/poky/meta/recipes-core/systemd/systemd/0026-Handle-missing-gshadow.patch
index 4180afb..068600f 100644
--- a/poky/meta/recipes-core/systemd/systemd/0026-Handle-missing-gshadow.patch
+++ b/poky/meta/recipes-core/systemd/systemd/0026-Handle-missing-gshadow.patch
@@ -1,7 +1,7 @@
-From 47bf88f74717b417e4adbcc04256334b2335c873 Mon Sep 17 00:00:00 2001
+From 04e94f9a15101daa8f65a9af269d26cda2a24056 Mon Sep 17 00:00:00 2001
From: Alex Kiernan <alex.kiernan@gmail.com>
Date: Tue, 10 Mar 2020 11:05:20 +0000
-Subject: [PATCH 26/26] Handle missing gshadow
+Subject: [PATCH] Handle missing gshadow
gshadow usage is now present in the userdb code. Mask all uses of it to
allow compilation on musl
@@ -10,6 +10,7 @@
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
[Rebased for v247]
Signed-off-by: Luca Boccassi <luca.boccassi@microsoft.com>
+
---
src/shared/user-record-nss.c | 20 ++++++++++++++++++++
src/shared/user-record-nss.h | 4 ++++
@@ -138,10 +139,10 @@
#include <shadow.h>
diff --git a/src/shared/userdb.c b/src/shared/userdb.c
-index 2d480283d1..0d19764f2e 100644
+index 613350bd46..5c821d28cd 100644
--- a/src/shared/userdb.c
+++ b/src/shared/userdb.c
-@@ -929,13 +929,16 @@ int groupdb_iterator_get(UserDBIterator *iterator, GroupRecord **ret) {
+@@ -938,13 +938,16 @@ int groupdb_iterator_get(UserDBIterator *iterator, GroupRecord **ret) {
if (gr) {
_cleanup_free_ char *buffer = NULL;
bool incomplete = false;
@@ -155,10 +156,10 @@
iterator->synthesize_nobody = false;
+#if ENABLE_GSHADOW
- r = nss_sgrp_for_group(gr, &sgrp, &buffer);
- if (r < 0) {
- log_debug_errno(r, "Failed to acquire shadow entry for group %s, ignoring: %m", gr->gr_name);
-@@ -943,6 +946,9 @@ int groupdb_iterator_get(UserDBIterator *iterator, GroupRecord **ret) {
+ if (!FLAGS_SET(iterator->flags, USERDB_AVOID_SHADOW)) {
+ r = nss_sgrp_for_group(gr, &sgrp, &buffer);
+ if (r < 0) {
+@@ -957,6 +960,9 @@ int groupdb_iterator_get(UserDBIterator *iterator, GroupRecord **ret) {
}
r = nss_group_to_group_record(gr, r >= 0 ? &sgrp : NULL, ret);
@@ -168,6 +169,3 @@
if (r < 0)
return r;
---
-2.27.0
-
diff --git a/poky/meta/recipes-core/systemd/systemd/0027-proc-dont-trigger-mount-error-with-invalid-options-o.patch b/poky/meta/recipes-core/systemd/systemd/0027-proc-dont-trigger-mount-error-with-invalid-options-o.patch
deleted file mode 100644
index 94a4c30..0000000
--- a/poky/meta/recipes-core/systemd/systemd/0027-proc-dont-trigger-mount-error-with-invalid-options-o.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From 297aba739cd689e4dc9f43bb1422ec88d481099a Mon Sep 17 00:00:00 2001
-From: Paul Gortmaker <paul.gortmaker@windriver.com>
-Date: Wed, 13 Jan 2021 21:09:33 +0000
-Subject: [PATCH] proc: dont trigger mount error with invalid options on old
- kernels
-
-As of commit 4e39995371738b04d98d27b0d34ea8fe09ec9fab ("core: introduce
-ProtectProc= and ProcSubset= to expose hidepid= and subset= procfs
-mount options") kernels older than v5.8 generate multple warnings at
-boot, as seen in this Yocto build from today:
-
- qemux86-64 login: root
- [ 65.829009] proc: Bad value for 'hidepid'
- root@qemux86-64:~# dmesg|grep proc:
- [ 16.990706] proc: Bad value for 'hidepid'
- [ 28.060178] proc: Bad value for 'hidepid'
- [ 28.874229] proc: Bad value for 'hidepid'
- [ 32.685107] proc: Bad value for 'hidepid'
- [ 65.829009] proc: Bad value for 'hidepid'
- root@qemux86-64:~#
-
-The systemd maintainer has dismissed this as something people should
-simply ignore[1] and has no interest in trying to avoid it by
-proactively checking the kernel version, so people can safely assume
-that they will never see this version check commit upstream.
-
-However, as can be seen above, telling people to just ignore it is not
-an option, as we'll end up answering the same question and dealing with
-the same bug over and over again.
-
-The commit that triggers this is systemd v247-rc1~378^2~3 -- so any
-systemd 247 and above plus kernel v5.7 or older will need this.
-
-[1] https://github.com/systemd/systemd/issues/16896
-
-Upstream-Status: Denied [https://github.com/systemd/systemd/issues/16896]
-Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
-Index: git/src/core/namespace.c
-===================================================================
---- git.orig/src/core/namespace.c
-+++ git/src/core/namespace.c
-@@ -4,7 +4,9 @@
- #include <linux/loop.h>
- #include <sched.h>
- #include <stdio.h>
-+#include <stdlib.h>
- #include <sys/mount.h>
-+#include <sys/utsname.h>
- #include <unistd.h>
- #include <linux/fs.h>
-
-@@ -860,13 +862,32 @@ static int mount_sysfs(const MountEntry
-
- static int mount_procfs(const MountEntry *m, const NamespaceInfo *ns_info) {
- const char *entry_path;
-- int r;
-+ int r, major, minor;
-+ struct utsname uts;
-+ bool old = false;
-
- assert(m);
- assert(ns_info);
-
- entry_path = mount_entry_path(m);
-
-+ /* If uname says that the system is older than v5.8, then the textual hidepid= stuff is not
-+ * supported by the kernel, and thus the per-instance hidepid= neither, which means we
-+ * really don't want to use it, since it would affect our host's /proc * mount. Hence let's
-+ * gracefully fallback to a classic, unrestricted version. */
-+
-+ r = uname(&uts);
-+ if (r < 0)
-+ return errno;
-+
-+ major = atoi(uts.release);
-+ minor = atoi(strchr(uts.release, '.') + 1);
-+
-+ if (major < 5 || (major == 5 && minor < 8)) {
-+ log_debug("Pre v5.8 kernel detected [v%d.%d] - skipping hidepid=", major, minor);
-+ old = true;
-+ }
-+
- /* Mount a new instance, so that we get the one that matches our user namespace, if we are running in
- * one. i.e we don't reuse existing mounts here under any condition, we want a new instance owned by
- * our user namespace and with our hidepid= settings applied. Hence, let's get rid of everything
-@@ -875,8 +896,8 @@ static int mount_procfs(const MountEntry
- (void) mkdir_p_label(entry_path, 0755);
- (void) umount_recursive(entry_path, 0);
-
-- if (ns_info->protect_proc != PROTECT_PROC_DEFAULT ||
-- ns_info->proc_subset != PROC_SUBSET_ALL) {
-+ if (!old && (ns_info->protect_proc != PROTECT_PROC_DEFAULT ||
-+ ns_info->proc_subset != PROC_SUBSET_ALL)) {
- _cleanup_free_ char *opts = NULL;
-
- /* Starting with kernel 5.8 procfs' hidepid= logic is truly per-instance (previously it
diff --git a/poky/meta/recipes-core/systemd/systemd/0028-missing_syscall.h-Define-MIPS-ABI-defines-for-musl.patch b/poky/meta/recipes-core/systemd/systemd/0028-missing_syscall.h-Define-MIPS-ABI-defines-for-musl.patch
index bbee6e6..2289404 100644
--- a/poky/meta/recipes-core/systemd/systemd/0028-missing_syscall.h-Define-MIPS-ABI-defines-for-musl.patch
+++ b/poky/meta/recipes-core/systemd/systemd/0028-missing_syscall.h-Define-MIPS-ABI-defines-for-musl.patch
@@ -1,4 +1,4 @@
-From 7b32582c066549fea0f7180a6c575e7fa37a867f Mon Sep 17 00:00:00 2001
+From 366cd28f5f93ba7c861cd32a718251770d74830e Mon Sep 17 00:00:00 2001
From: Khem Raj <raj.khem@gmail.com>
Date: Mon, 12 Apr 2021 23:44:53 -0700
Subject: [PATCH] missing_syscall.h: Define MIPS ABI defines for musl
@@ -10,15 +10,16 @@
Upstream-Status: Pending
Signed-off-by: Khem Raj <raj.khem@gmail.com>
+
---
src/basic/missing_syscall.h | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/src/basic/missing_syscall.h b/src/basic/missing_syscall.h
-index 0594a1b930..495d161334 100644
+index 1384324804..0202d00372 100644
--- a/src/basic/missing_syscall.h
+++ b/src/basic/missing_syscall.h
-@@ -15,6 +15,12 @@
+@@ -20,6 +20,12 @@
#include <asm/sgidefs.h>
#endif
@@ -28,9 +29,6 @@
+#define _MIPS_SIM_ABI64 3
+#endif
+
- #if defined(__x86_64__) && defined(__ILP32__)
- # define systemd_SC_arch_bias(x) ((x) | /* __X32_SYSCALL_BIT */ 0x40000000)
- #elif defined(__ia64__)
---
-2.31.1
-
+ #include "missing_keyctl.h"
+ #include "missing_stat.h"
+ #include "missing_syscall_def.h"
diff --git a/poky/meta/recipes-core/systemd/systemd_247.6.bb b/poky/meta/recipes-core/systemd/systemd_248.3.bb
similarity index 98%
rename from poky/meta/recipes-core/systemd/systemd_247.6.bb
rename to poky/meta/recipes-core/systemd/systemd_248.3.bb
index ce6ac7e..4e65656 100644
--- a/poky/meta/recipes-core/systemd/systemd_247.6.bb
+++ b/poky/meta/recipes-core/systemd/systemd_248.3.bb
@@ -14,7 +14,8 @@
# that we don't build both udev and systemd in world builds.
REQUIRED_DISTRO_FEATURES = "systemd"
-SRC_URI += "file://touchscreen.rules \
+SRC_URI += " \
+ file://touchscreen.rules \
file://00-create-volatile.conf \
${@bb.utils.contains('PACKAGECONFIG', 'polkit_hostnamed_fallback', 'file://org.freedesktop.hostname1_no_polkit.conf', '', d)} \
${@bb.utils.contains('PACKAGECONFIG', 'polkit_hostnamed_fallback', 'file://00-hostnamed-network-user.conf', '', d)} \
@@ -24,9 +25,7 @@
file://0001-binfmt-Don-t-install-dependency-links-at-install-tim.patch \
file://0003-implment-systemd-sysv-install-for-OE.patch \
file://0001-systemd.pc.in-use-ROOTPREFIX-without-suffixed-slash.patch \
- file://0001-logind-Restore-chvt-as-non-root-user-without-polkit.patch \
- file://0027-proc-dont-trigger-mount-error-with-invalid-options-o.patch \
- file://0001-analyze-resolve-executable-path-if-it-is-relative.patch \
+ file://0001-test-parse-argument-Include-signal.h.patch \
"
# patches needed by musl
@@ -474,6 +473,7 @@
${rootlibexecdir}/systemd/systemd-machined \
${rootlibexecdir}/systemd/systemd-pull \
${exec_prefix}/lib/tmpfiles.d/systemd-nspawn.conf \
+ ${exec_prefix}/lib/tmpfiles.d/README \
${systemd_system_unitdir}/systemd-nspawn@.service \
${libdir}/libnss_mymachines.so.2 \
${datadir}/dbus-1/system-services/org.freedesktop.import1.service \
@@ -605,6 +605,7 @@
${exec_prefix}/lib/environment.d \
${localstatedir} \
${rootlibexecdir}/modprobe.d/systemd.conf \
+ ${rootlibexecdir}/modprobe.d/README \
${datadir}/dbus-1/system.d/org.freedesktop.timedate1.conf \
${datadir}/dbus-1/system.d/org.freedesktop.locale1.conf \
${datadir}/dbus-1/system.d/org.freedesktop.network1.conf \
@@ -647,6 +648,7 @@
${rootlibexecdir}/udev/ata_id \
${rootlibexecdir}/udev/cdrom_id \
${rootlibexecdir}/udev/collect \
+ ${rootlibexecdir}/udev/dmi_memory_id \
${rootlibexecdir}/udev/fido_id \
${rootlibexecdir}/udev/findkeyboards \
${rootlibexecdir}/udev/keyboard-force-release.sh \
@@ -674,6 +676,7 @@
${rootlibexecdir}/udev/rules.d/61-autosuspend-manual.rules \
${rootlibexecdir}/udev/rules.d/64-btrfs.rules \
${rootlibexecdir}/udev/rules.d/70-joystick.rules \
+ ${rootlibexecdir}/udev/rules.d/70-memory.rules \
${rootlibexecdir}/udev/rules.d/70-mouse.rules \
${rootlibexecdir}/udev/rules.d/70-power-switch.rules \
${rootlibexecdir}/udev/rules.d/70-touchpad.rules \
@@ -683,6 +686,7 @@
${rootlibexecdir}/udev/rules.d/80-drivers.rules \
${rootlibexecdir}/udev/rules.d/80-net-setup-link.rules \
${rootlibexecdir}/udev/rules.d/90-vconsole.rules \
+ ${rootlibexecdir}/udev/rules.d/README \
${sysconfdir}/udev \
${sysconfdir}/init.d/systemd-udevd \
${systemd_unitdir}/system/*udev* \
diff --git a/poky/meta/recipes-core/util-linux/util-linux.inc b/poky/meta/recipes-core/util-linux/util-linux.inc
index cbf6102..6b47f41 100644
--- a/poky/meta/recipes-core/util-linux/util-linux.inc
+++ b/poky/meta/recipes-core/util-linux/util-linux.inc
@@ -27,8 +27,7 @@
FILESEXTRAPATHS_prepend := "${THISDIR}/util-linux:"
MAJOR_VERSION = "${@'.'.join(d.getVar('PV').split('.')[0:2])}"
-BPN = "util-linux"
-SRC_URI = "${KERNELORG_MIRROR}/linux/utils/${BPN}/v${MAJOR_VERSION}/${BP}.tar.xz \
+SRC_URI = "${KERNELORG_MIRROR}/linux/utils/util-linux/v${MAJOR_VERSION}/util-linux-${PV}.tar.xz \
file://configure-sbindir.patch \
file://runuser.pamd \
file://runuser-l.pamd \
diff --git a/poky/meta/recipes-devtools/apt/apt/0001-Do-not-init-tables-from-dpkg-configuration.patch b/poky/meta/recipes-devtools/apt/apt/0001-Do-not-init-tables-from-dpkg-configuration.patch
index e0e7e0c..a9a8eb6 100644
--- a/poky/meta/recipes-devtools/apt/apt/0001-Do-not-init-tables-from-dpkg-configuration.patch
+++ b/poky/meta/recipes-devtools/apt/apt/0001-Do-not-init-tables-from-dpkg-configuration.patch
@@ -1,4 +1,4 @@
-From 382f8381ef8baf754057e376a6d9bf840ca6d543 Mon Sep 17 00:00:00 2001
+From 5fb6355c7dd00c97fe90e805ace075b6e9b6952d Mon Sep 17 00:00:00 2001
From: Alexander Kanavin <alex.kanavin@gmail.com>
Date: Fri, 10 May 2019 16:47:38 +0200
Subject: [PATCH] Do not init tables from dpkg configuration
diff --git a/poky/meta/recipes-devtools/apt/apt/0001-Revert-always-run-dpkg-configure-a-at-the-end-of-our.patch b/poky/meta/recipes-devtools/apt/apt/0001-Revert-always-run-dpkg-configure-a-at-the-end-of-our.patch
index c14dc2a..34d0c4b 100644
--- a/poky/meta/recipes-devtools/apt/apt/0001-Revert-always-run-dpkg-configure-a-at-the-end-of-our.patch
+++ b/poky/meta/recipes-devtools/apt/apt/0001-Revert-always-run-dpkg-configure-a-at-the-end-of-our.patch
@@ -1,4 +1,4 @@
-From a603b3281f3f60a87531c8cec4843f970170d409 Mon Sep 17 00:00:00 2001
+From 76f8386cac7f13688b386686e0b1fc4b1b574f53 Mon Sep 17 00:00:00 2001
From: Alexander Kanavin <alex.kanavin@gmail.com>
Date: Thu, 21 May 2020 20:13:25 +0000
Subject: [PATCH] Revert "always run 'dpkg --configure -a' at the end of our
diff --git a/poky/meta/recipes-devtools/apt/apt/0001-aptwebserver.cc-Include-array.patch b/poky/meta/recipes-devtools/apt/apt/0001-aptwebserver.cc-Include-array.patch
new file mode 100644
index 0000000..cfee50c
--- /dev/null
+++ b/poky/meta/recipes-devtools/apt/apt/0001-aptwebserver.cc-Include-array.patch
@@ -0,0 +1,32 @@
+From f999aeb5ceb77b81c36e6a55300a521aaa2da882 Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem@gmail.com>
+Date: Wed, 26 May 2021 22:12:46 -0700
+Subject: [PATCH] aptwebserver.cc: Include <array>
+
+This helps getting std::array definition
+
+Fixes
+test/interactive-helper/aptwebserver.cc:36:55: error: constexpr variable cannot have non-literal type 'const std::array<std::array<const char *, 2>, 6>'
+ constexpr std::array<std::array<char const *,2>,6> htmlencode = {{
+
+Upstream-Status: Submitted [https://github.com/Debian/apt/pull/133]
+Signed-off-by: Khem Raj <raj.khem@gmail.com>
+---
+ test/interactive-helper/aptwebserver.cc | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/test/interactive-helper/aptwebserver.cc b/test/interactive-helper/aptwebserver.cc
+index 58ba54f84..0e030c7e9 100644
+--- a/test/interactive-helper/aptwebserver.cc
++++ b/test/interactive-helper/aptwebserver.cc
+@@ -22,6 +22,7 @@
+ #include <unistd.h>
+
+ #include <algorithm>
++#include <array>
+ #include <fstream>
+ #include <iostream>
+ #include <list>
+--
+2.31.1
+
diff --git a/poky/meta/recipes-devtools/apt/apt_2.2.2.bb b/poky/meta/recipes-devtools/apt/apt_2.2.3.bb
similarity index 95%
rename from poky/meta/recipes-devtools/apt/apt_2.2.2.bb
rename to poky/meta/recipes-devtools/apt/apt_2.2.3.bb
index 192aec4..fe00fb0 100644
--- a/poky/meta/recipes-devtools/apt/apt_2.2.2.bb
+++ b/poky/meta/recipes-devtools/apt/apt_2.2.3.bb
@@ -13,6 +13,7 @@
file://0001-srvrec-Keep-support-for-older-resolver.patch \
file://0001-cmake-Do-not-build-po-files.patch \
file://0001-Hide-fstatat64-and-prlimit64-defines-on-musl.patch \
+ file://0001-aptwebserver.cc-Include-array.patch \
"
SRC_URI_append_class-native = " \
@@ -25,7 +26,7 @@
file://0001-Revert-always-run-dpkg-configure-a-at-the-end-of-our.patch \
"
-SRC_URI[sha256sum] = "c5449a4c2126a12497a9949cd10209926005d329f6ce7942a3781fa2fcf50487"
+SRC_URI[sha256sum] = "2880474bc08c79f103cd30d24a9c30c78b480c65076e466d24df93b9fa05ab27"
LIC_FILES_CHKSUM = "file://COPYING.GPL;md5=b234ee4d69f5fce4486a80fdaf4a4263"
# the package is taken from snapshots.debian.org; that source is static and goes stale
diff --git a/poky/meta/recipes-devtools/binutils/binutils-2.36.inc b/poky/meta/recipes-devtools/binutils/binutils-2.36.inc
index 66080df..d54e2a3 100644
--- a/poky/meta/recipes-devtools/binutils/binutils-2.36.inc
+++ b/poky/meta/recipes-devtools/binutils/binutils-2.36.inc
@@ -36,6 +36,7 @@
file://0015-sync-with-OE-libtool-changes.patch \
file://0016-Check-for-clang-before-checking-gcc-version.patch \
file://0017-Add-support-for-the-DW_FORM_strx-forms-to-the-BFD-li.patch \
+ file://0018-Add-DWARF-5-support-in-gold.patch \
file://CVE-2021-20197.patch \
"
S = "${WORKDIR}/git"
diff --git a/poky/meta/recipes-devtools/binutils/binutils/0018-Add-DWARF-5-support-in-gold.patch b/poky/meta/recipes-devtools/binutils/binutils/0018-Add-DWARF-5-support-in-gold.patch
new file mode 100644
index 0000000..353b680
--- /dev/null
+++ b/poky/meta/recipes-devtools/binutils/binutils/0018-Add-DWARF-5-support-in-gold.patch
@@ -0,0 +1,1374 @@
+From 29dab7648672342418a9d32767e3b3182d9e6a30 Mon Sep 17 00:00:00 2001
+From: Cary Coutant <ccoutant@gmail.com>
+Date: Wed, 17 Mar 2021 21:31:15 -0700
+Subject: [PATCH] Add DWARF 5 support in gold.
+
+elfcpp/
+ PR gold/27246
+ * dwarf.h (enum DW_LNCT): Add line number table content type codes.
+ (enum DW_LINE_OPS): Reformat.
+ (enum DW_LINE_EXTENDED_OPS): Reformat.
+ (enum DW_CHILDREN): Reformat.
+ (enum DW_RLE): Add range list entry types.
+ (enum DW_SECT): Update values for DWARF 5.
+
+gold/
+ PR gold/27246
+ * dwarf_reader.cc (Dwarf_abbrev_table::do_get_abbrev): Handle
+ DW_FORM_implicit_const.
+ (Dwarf_ranges_table::read_ranges_table): Add version parameter;
+ Adjust all callers. Look for .debug_rnglists section if DWARF 5.
+ (Dwarf_ranges_table::read_range_list_v5): New method.
+ (Dwarf_die::read_attributes): Handle new DWARF 5 DW_FORM codes.
+ (Dwarf_die::skip_attributes): Likewise.
+ (Dwarf_info_reader::do_parse): Support DWARF 5 unit header format.
+ (Dwarf_info_reader::read_3bytes_from_pointer): New method.
+ (Sized_dwarf_line_info::Sized_dwarf_line_info): Initialize
+ str_buffer_, str_buffer_start, reloc_map_, line_number_map_.
+ Look for .debug_line_str section.
+ (Sized_dwarf_line_info::read_header_prolog): Support DWARF 5 prolog.
+ (Sized_dwarf_line_info::read_header_tables): Rename to...
+ (Sized_dwarf_line_info::read_header_tables_v2): ... this.
+ (Sized_dwarf_line_info::read_header_tables_v5): New method.
+ (Sized_dwarf_line_info::process_one_opcode): Insert missing "this->".
+ Change advance_line to signed int64_t.
+ (Sized_dwarf_line_info::read_lines): Add endptr parameter; adjust
+ callers. Insert missing "this->".
+ (Sized_dwarf_line_info::read_line_mappings): Support DWARF 5.
+ (Sized_dwarf_line_info::do_addr2line): Add debug code.
+ * dwarf_reader.h (Dwarf_abbrev_table::Attribute): Add implicit_const
+ field. Adjust constructor.
+ (Dwarf_abbrev_table::add_sttribute): Add implicit_const parameter.
+ (Dwarf_ranges_table::read_ranges_table): Add version parameter.
+ (Dwarf_ranges_table::read_range_list_v5): New method.
+ (Dwarf_die): Remove unused attr_off field.
+ (Dwarf_info_reader::Dwarf_info_reader): Initialize unit_type_ field.
+ (Dwarf_info_reader::is_type_unit): New method.
+ (Dwarf_info_reader::read_3bytes_from_pointer): New method.
+ (Dwarf_info_reader::read_range_list): Call read_range_list_v5 for
+ DWARF 5 range lists.
+ (Dwarf_info_reader::is_type_unit_): Remove.
+ (Dwarf_info_reader::unit_type_): New field.
+ (Sized_dwarf_line_info::~Sized_dwarf_line_info): Delete
+ str_buffer_start_.
+ (Sized_dwarf_line_info::read_header_tables): Rename to...
+ (Sized_dwarf_line_info::read_header_tables_v2): ... this.
+ (Sized_dwarf_line_info::read_header_tables_v5): New method.
+ (Sized_dwarf_line_info::read_lines): Add endptr parameter.
+ (Sized_dwarf_line_info::Dwarf_line_infoHeader): Add address_size field.
+ (Sized_dwarf_line_info::str_buffer_): New field.
+ (Sized_dwarf_line_info::str_buffer_end_): New field.
+ (Sized_dwarf_line_info::str_buffer_start_): New field.
+ (Sized_dwarf_line_info::end_of_header_length_): New field.
+ (Sized_dwarf_line_info::end_of_unit_): New field.
+
+Upstream-Status: Backport [5cde809b7b9 Add DWARF 5 support in gold.]
+
+Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
+---
+ elfcpp/dwarf.h | 89 +++++--
+ gold/dwarf_reader.cc | 591 +++++++++++++++++++++++++++++++++++++------
+ gold/dwarf_reader.h | 103 ++++++--
+ 3 files changed, 654 insertions(+), 129 deletions(-)
+
+diff --git a/elfcpp/dwarf.h b/elfcpp/dwarf.h
+index e24347f8481..c9a9e02369c 100644
+--- a/elfcpp/dwarf.h
++++ b/elfcpp/dwarf.h
+@@ -152,35 +152,48 @@ enum DW_EH_PE
+ DW_EH_PE_indirect = 0x80
+ };
+
++// Line number table content type codes.
++
++enum DW_LNCT
++{
++ DW_LNCT_path = 0x1,
++ DW_LNCT_directory_index = 0x2,
++ DW_LNCT_timestamp = 0x3,
++ DW_LNCT_size = 0x4,
++ DW_LNCT_MD5 = 0x5,
++ DW_LNCT_lo_user = 0x2000,
++ DW_LNCT_hi_user = 0x3fff
++};
++
+ // Line number opcodes.
+
+ enum DW_LINE_OPS
+ {
+- DW_LNS_extended_op = 0,
+- DW_LNS_copy = 1,
+- DW_LNS_advance_pc = 2,
+- DW_LNS_advance_line = 3,
+- DW_LNS_set_file = 4,
+- DW_LNS_set_column = 5,
+- DW_LNS_negate_stmt = 6,
+- DW_LNS_set_basic_block = 7,
+- DW_LNS_const_add_pc = 8,
+- DW_LNS_fixed_advance_pc = 9,
++ DW_LNS_extended_op = 0x00,
++ DW_LNS_copy = 0x01,
++ DW_LNS_advance_pc = 0x02,
++ DW_LNS_advance_line = 0x03,
++ DW_LNS_set_file = 0x04,
++ DW_LNS_set_column = 0x05,
++ DW_LNS_negate_stmt = 0x06,
++ DW_LNS_set_basic_block = 0x07,
++ DW_LNS_const_add_pc = 0x08,
++ DW_LNS_fixed_advance_pc = 0x09,
+ // DWARF 3.
+- DW_LNS_set_prologue_end = 10,
+- DW_LNS_set_epilogue_begin = 11,
+- DW_LNS_set_isa = 12
++ DW_LNS_set_prologue_end = 0x0a,
++ DW_LNS_set_epilogue_begin = 0x0b,
++ DW_LNS_set_isa = 0x0c
+ };
+
+ // Line number extended opcodes.
+
+ enum DW_LINE_EXTENDED_OPS
+ {
+- DW_LNE_end_sequence = 1,
+- DW_LNE_set_address = 2,
+- DW_LNE_define_file = 3,
++ DW_LNE_end_sequence = 0x01,
++ DW_LNE_set_address = 0x02,
++ DW_LNE_define_file = 0x03,
+ // DWARF4.
+- DW_LNE_set_discriminator = 4,
++ DW_LNE_set_discriminator = 0x04,
+ // HP extensions.
+ DW_LNE_HP_negate_is_UV_update = 0x11,
+ DW_LNE_HP_push_context = 0x12,
+@@ -191,13 +204,15 @@ enum DW_LINE_EXTENDED_OPS
+ DW_LNE_HP_negate_post_semantics = 0x17,
+ DW_LNE_HP_negate_function_exit = 0x18,
+ DW_LNE_HP_negate_front_end_logical = 0x19,
+- DW_LNE_HP_define_proc = 0x20
++ DW_LNE_HP_define_proc = 0x20,
++ DW_LNE_lo_user = 0x80,
++ DW_LNE_hi_user = 0xff
+ };
+
+ enum DW_CHILDREN
+ {
+- DW_CHILDREN_no =0x00,
+- DW_CHILDREN_yes =0x01
++ DW_CHILDREN_no = 0,
++ DW_CHILDREN_yes = 1
+ };
+
+ // Source language names and codes.
+@@ -247,20 +262,38 @@ enum DW_LANG
+ DW_LANG_HP_Assembler = 0x8007
+ };
+
++// Range list entry kinds in .debug_rnglists* section.
++
++enum DW_RLE
++{
++ DW_RLE_end_of_list = 0x00,
++ DW_RLE_base_addressx = 0x01,
++ DW_RLE_startx_endx = 0x02,
++ DW_RLE_startx_length = 0x03,
++ DW_RLE_offset_pair = 0x04,
++ DW_RLE_base_address = 0x05,
++ DW_RLE_start_end = 0x06,
++ DW_RLE_start_length = 0x07
++};
++
+ // DWARF section identifiers used in the package format.
+ // Extensions for Fission. See http://gcc.gnu.org/wiki/DebugFissionDWP.
++// Added (with changes) in DWARF 5.
+
+ enum DW_SECT
+ {
+- DW_SECT_INFO = 1,
+- DW_SECT_TYPES = 2,
+- DW_SECT_ABBREV = 3,
+- DW_SECT_LINE = 4,
+- DW_SECT_LOC = 5,
++ DW_SECT_INFO = 1,
++ DW_SECT_ABBREV = 3,
++ DW_SECT_LINE = 4,
++ DW_SECT_LOCLISTS = 5,
+ DW_SECT_STR_OFFSETS = 6,
+- DW_SECT_MACINFO = 7,
+- DW_SECT_MACRO = 8,
+- DW_SECT_MAX = DW_SECT_MACRO,
++ DW_SECT_MACINFO = 7,
++ DW_SECT_RNGLISTS = 8,
++ DW_SECT_MAX = DW_SECT_RNGLISTS,
++ // These were used only for the experimental Fission support in DWARF 4.
++ DW_SECT_TYPES = 2,
++ DW_SECT_LOC = 5,
++ DW_SECT_MACRO = 8
+ };
+
+ } // End namespace elfcpp.
+diff --git a/gold/dwarf_reader.cc b/gold/dwarf_reader.cc
+index f0e6b89bde2..83a0114ed39 100644
+--- a/gold/dwarf_reader.cc
++++ b/gold/dwarf_reader.cc
+@@ -26,6 +26,7 @@
+ #include <utility>
+ #include <vector>
+
++#include "debug.h"
+ #include "elfcpp_swap.h"
+ #include "dwarf.h"
+ #include "object.h"
+@@ -275,6 +276,14 @@ Dwarf_abbrev_table::do_get_abbrev(unsigned int code)
+ uint64_t form = read_unsigned_LEB_128(this->buffer_pos_, &len);
+ this->buffer_pos_ += len;
+
++ // For DW_FORM_implicit_const, read the constant.
++ int64_t implicit_const = 0;
++ if (form == elfcpp::DW_FORM_implicit_const)
++ {
++ implicit_const = read_signed_LEB_128(this->buffer_pos_, &len);
++ this->buffer_pos_ += len;
++ }
++
+ // A (0,0) pair terminates the list.
+ if (attr == 0 && form == 0)
+ break;
+@@ -282,7 +291,7 @@ Dwarf_abbrev_table::do_get_abbrev(unsigned int code)
+ if (attr == elfcpp::DW_AT_sibling)
+ entry->has_sibling_attribute = true;
+
+- entry->add_attribute(attr, form);
++ entry->add_attribute(attr, form, implicit_const);
+ }
+
+ this->store_abbrev(nextcode, entry);
+@@ -302,8 +311,16 @@ Dwarf_ranges_table::read_ranges_table(
+ Relobj* object,
+ const unsigned char* symtab,
+ off_t symtab_size,
+- unsigned int ranges_shndx)
++ unsigned int ranges_shndx,
++ unsigned int version)
+ {
++ const std::string section_name(version < 5
++ ? ".debug_ranges"
++ : ".debug_rnglists");
++ const std::string compressed_section_name(version < 5
++ ? ".zdebug_ranges"
++ : ".zdebug_rnglists");
++
+ // If we've already read this abbrev table, return immediately.
+ if (this->ranges_shndx_ > 0
+ && this->ranges_shndx_ == ranges_shndx)
+@@ -318,7 +335,7 @@ Dwarf_ranges_table::read_ranges_table(
+ for (unsigned int i = 1; i < object->shnum(); ++i)
+ {
+ std::string name = object->section_name(i);
+- if (name == ".debug_ranges" || name == ".zdebug_ranges")
++ if (name == section_name || name == compressed_section_name)
+ {
+ ranges_shndx = i;
+ this->output_section_offset_ = object->output_section_offset(i);
+@@ -393,7 +410,7 @@ Dwarf_ranges_table::read_range_list(
+ {
+ Dwarf_range_list* ranges;
+
+- if (!this->read_ranges_table(object, symtab, symtab_size, ranges_shndx))
++ if (!this->read_ranges_table(object, symtab, symtab_size, ranges_shndx, 4))
+ return NULL;
+
+ // Correct the offset. For incremental update links, we have a
+@@ -459,6 +476,125 @@ Dwarf_ranges_table::read_range_list(
+ return ranges;
+ }
+
++// Read a DWARF 5 range list from section RANGES_SHNDX at offset RANGES_OFFSET.
++
++Dwarf_range_list*
++Dwarf_ranges_table::read_range_list_v5(
++ Relobj* object,
++ const unsigned char* symtab,
++ off_t symtab_size,
++ unsigned int addr_size,
++ unsigned int ranges_shndx,
++ off_t offset)
++{
++ Dwarf_range_list* ranges;
++
++ if (!this->read_ranges_table(object, symtab, symtab_size, ranges_shndx, 5))
++ return NULL;
++
++ ranges = new Dwarf_range_list();
++ off_t base = 0;
++ unsigned int shndx0 = 0;
++
++ // Correct the offset. For incremental update links, we have a
++ // relocated offset that is relative to the output section, but
++ // here we need an offset relative to the input section.
++ offset -= this->output_section_offset_;
++
++ // Read the range list at OFFSET.
++ const unsigned char* prle = this->ranges_buffer_ + offset;
++ while (prle < this->ranges_buffer_end_)
++ {
++ off_t start;
++ off_t end;
++ unsigned int shndx1 = 0;
++ unsigned int shndx2 = 0;
++ size_t len;
++
++ // Read the entry type.
++ unsigned int rle_type = *prle++;
++ offset += 1;
++
++ if (rle_type == elfcpp::DW_RLE_end_of_list)
++ break;
++
++ switch (rle_type)
++ {
++ case elfcpp::DW_RLE_base_address:
++ if (addr_size == 4)
++ base = this->dwinfo_->read_from_pointer<32>(prle);
++ else
++ base = this->dwinfo_->read_from_pointer<64>(prle);
++ if (this->ranges_reloc_mapper_ != NULL)
++ shndx0 = this->lookup_reloc(offset, &base);
++ prle += addr_size;
++ offset += addr_size;
++ break;
++
++ case elfcpp::DW_RLE_offset_pair:
++ start = read_unsigned_LEB_128(prle, &len);
++ prle += len;
++ offset += len;
++ end = read_unsigned_LEB_128(prle, &len);
++ prle += len;
++ offset += len;
++ if (shndx0 == 0 || object->is_section_included(shndx0))
++ ranges->add(shndx0, base + start, base + end);
++ break;
++
++ case elfcpp::DW_RLE_start_end:
++ if (addr_size == 4)
++ {
++ start = this->dwinfo_->read_from_pointer<32>(prle);
++ end = this->dwinfo_->read_from_pointer<32>(prle + 4);
++ }
++ else
++ {
++ start = this->dwinfo_->read_from_pointer<64>(prle);
++ end = this->dwinfo_->read_from_pointer<64>(prle + 8);
++ }
++ if (this->ranges_reloc_mapper_ != NULL)
++ {
++ shndx1 = this->lookup_reloc(offset, &start);
++ shndx2 = this->lookup_reloc(offset + addr_size, &end);
++ if (shndx1 != shndx2)
++ gold_warning(_("%s: DWARF info may be corrupt; offsets in a "
++ "range list entry are in different sections"),
++ object->name().c_str());
++ }
++ prle += addr_size * 2;
++ offset += addr_size * 2;
++ if (shndx1 == 0 || object->is_section_included(shndx1))
++ ranges->add(shndx1, start, end);
++ break;
++
++ case elfcpp::DW_RLE_start_length:
++ if (addr_size == 4)
++ start = this->dwinfo_->read_from_pointer<32>(prle);
++ else
++ start = this->dwinfo_->read_from_pointer<64>(prle);
++ if (this->ranges_reloc_mapper_ != NULL)
++ shndx1 = this->lookup_reloc(offset, &start);
++ prle += addr_size;
++ offset += addr_size;
++ end = start + read_unsigned_LEB_128(prle, &len);
++ prle += len;
++ offset += len;
++ if (shndx1 == 0 || object->is_section_included(shndx1))
++ ranges->add(shndx1, start, end);
++ break;
++
++ default:
++ gold_warning(_("%s: DWARF range list contains "
++ "unsupported entry type (%d)"),
++ object->name().c_str(), rle_type);
++ break;
++ }
++ }
++
++ return ranges;
++}
++
+ // Look for a relocation at offset OFF in the range table,
+ // and return the section index and offset of the target.
+
+@@ -709,7 +845,13 @@ Dwarf_die::read_attributes()
+ case elfcpp::DW_FORM_flag_present:
+ attr_value.val.intval = 1;
+ break;
++ case elfcpp::DW_FORM_implicit_const:
++ attr_value.val.intval =
++ this->abbrev_code_->attributes[i].implicit_const;
++ break;
+ case elfcpp::DW_FORM_strp:
++ case elfcpp::DW_FORM_strp_sup:
++ case elfcpp::DW_FORM_line_strp:
+ {
+ off_t str_off;
+ if (this->dwinfo_->offset_size() == 4)
+@@ -722,6 +864,26 @@ Dwarf_die::read_attributes()
+ attr_value.val.refval = str_off;
+ break;
+ }
++ case elfcpp::DW_FORM_strx:
++ case elfcpp::DW_FORM_GNU_str_index:
++ attr_value.val.uintval = read_unsigned_LEB_128(pattr, &len);
++ pattr += len;
++ break;
++ case elfcpp::DW_FORM_strx1:
++ attr_value.val.uintval = *pattr++;
++ break;
++ case elfcpp::DW_FORM_strx2:
++ attr_value.val.uintval =
++ this->dwinfo_->read_from_pointer<16>(&pattr);
++ break;
++ case elfcpp::DW_FORM_strx3:
++ attr_value.val.uintval =
++ this->dwinfo_->read_3bytes_from_pointer(&pattr);
++ break;
++ case elfcpp::DW_FORM_strx4:
++ attr_value.val.uintval =
++ this->dwinfo_->read_from_pointer<32>(&pattr);
++ break;
+ case elfcpp::DW_FORM_sec_offset:
+ {
+ off_t sec_off;
+@@ -747,7 +909,6 @@ Dwarf_die::read_attributes()
+ this->dwinfo_->lookup_reloc(attr_off, &sec_off);
+ attr_value.aux.shndx = shndx;
+ attr_value.val.refval = sec_off;
+- ref_form = true;
+ break;
+ }
+ case elfcpp::DW_FORM_ref_addr:
+@@ -815,6 +976,7 @@ Dwarf_die::read_attributes()
+ break;
+ }
+ case elfcpp::DW_FORM_ref4:
++ case elfcpp::DW_FORM_ref_sup4:
+ {
+ off_t sec_off;
+ sec_off = this->dwinfo_->read_from_pointer<32>(&pattr);
+@@ -835,11 +997,20 @@ Dwarf_die::read_attributes()
+ attr_value.val.intval = sec_off;
+ break;
+ }
++ case elfcpp::DW_FORM_data16:
++ {
++ // For now, treat this as a 16-byte block.
++ attr_value.val.blockval = pattr;
++ attr_value.aux.blocklen = 16;
++ pattr += 16;
++ break;
++ }
+ case elfcpp::DW_FORM_ref_sig8:
+ attr_value.val.uintval =
+ this->dwinfo_->read_from_pointer<64>(&pattr);
+ break;
+ case elfcpp::DW_FORM_ref8:
++ case elfcpp::DW_FORM_ref_sup8:
+ {
+ off_t sec_off;
+ sec_off = this->dwinfo_->read_from_pointer<64>(&pattr);
+@@ -856,11 +1027,29 @@ Dwarf_die::read_attributes()
+ pattr += len;
+ break;
+ case elfcpp::DW_FORM_udata:
++ attr_value.val.uintval = read_unsigned_LEB_128(pattr, &len);
++ pattr += len;
++ break;
++ case elfcpp::DW_FORM_addrx:
+ case elfcpp::DW_FORM_GNU_addr_index:
+- case elfcpp::DW_FORM_GNU_str_index:
+ attr_value.val.uintval = read_unsigned_LEB_128(pattr, &len);
+ pattr += len;
+ break;
++ case elfcpp::DW_FORM_addrx1:
++ attr_value.val.uintval = *pattr++;
++ break;
++ case elfcpp::DW_FORM_addrx2:
++ attr_value.val.uintval =
++ this->dwinfo_->read_from_pointer<16>(&pattr);
++ break;
++ case elfcpp::DW_FORM_addrx3:
++ attr_value.val.uintval =
++ this->dwinfo_->read_3bytes_from_pointer(&pattr);
++ break;
++ case elfcpp::DW_FORM_addrx4:
++ attr_value.val.uintval =
++ this->dwinfo_->read_from_pointer<32>(&pattr);
++ break;
+ case elfcpp::DW_FORM_sdata:
+ attr_value.val.intval = read_signed_LEB_128(pattr, &len);
+ pattr += len;
+@@ -870,6 +1059,11 @@ Dwarf_die::read_attributes()
+ len = strlen(attr_value.val.stringval);
+ pattr += len + 1;
+ break;
++ case elfcpp::DW_FORM_loclistx:
++ case elfcpp::DW_FORM_rnglistx:
++ attr_value.val.uintval = read_unsigned_LEB_128(pattr, &len);
++ pattr += len;
++ break;
+ default:
+ return false;
+ }
+@@ -954,9 +1148,12 @@ Dwarf_die::skip_attributes()
+ switch(form)
+ {
+ case elfcpp::DW_FORM_flag_present:
++ case elfcpp::DW_FORM_implicit_const:
+ break;
+ case elfcpp::DW_FORM_strp:
+ case elfcpp::DW_FORM_sec_offset:
++ case elfcpp::DW_FORM_strp_sup:
++ case elfcpp::DW_FORM_line_strp:
+ pattr += this->dwinfo_->offset_size();
+ break;
+ case elfcpp::DW_FORM_addr:
+@@ -993,23 +1190,42 @@ Dwarf_die::skip_attributes()
+ case elfcpp::DW_FORM_data1:
+ case elfcpp::DW_FORM_ref1:
+ case elfcpp::DW_FORM_flag:
++ case elfcpp::DW_FORM_strx1:
++ case elfcpp::DW_FORM_addrx1:
+ pattr += 1;
+ break;
+ case elfcpp::DW_FORM_data2:
+ case elfcpp::DW_FORM_ref2:
++ case elfcpp::DW_FORM_strx2:
++ case elfcpp::DW_FORM_addrx2:
+ pattr += 2;
+ break;
++ case elfcpp::DW_FORM_strx3:
++ case elfcpp::DW_FORM_addrx3:
++ pattr += 3;
++ break;
+ case elfcpp::DW_FORM_data4:
+ case elfcpp::DW_FORM_ref4:
++ case elfcpp::DW_FORM_ref_sup4:
++ case elfcpp::DW_FORM_strx4:
++ case elfcpp::DW_FORM_addrx4:
+ pattr += 4;
+ break;
+ case elfcpp::DW_FORM_data8:
+ case elfcpp::DW_FORM_ref8:
+ case elfcpp::DW_FORM_ref_sig8:
++ case elfcpp::DW_FORM_ref_sup8:
+ pattr += 8;
+ break;
++ case elfcpp::DW_FORM_data16:
++ pattr += 16;
++ break;
+ case elfcpp::DW_FORM_ref_udata:
+ case elfcpp::DW_FORM_udata:
++ case elfcpp::DW_FORM_addrx:
++ case elfcpp::DW_FORM_strx:
++ case elfcpp::DW_FORM_loclistx:
++ case elfcpp::DW_FORM_rnglistx:
+ case elfcpp::DW_FORM_GNU_addr_index:
+ case elfcpp::DW_FORM_GNU_str_index:
+ read_unsigned_LEB_128(pattr, &len);
+@@ -1313,6 +1529,13 @@ Dwarf_info_reader::do_parse()
+ elfcpp::Swap_unaligned<16, big_endian>::readval(pinfo);
+ pinfo += 2;
+
++ // DWARF 5: Read the unit type (1 byte) and address size (1 byte).
++ if (this->cu_version_ >= 5)
++ {
++ this->unit_type_ = *pinfo++;
++ this->address_size_ = *pinfo++;
++ }
++
+ // Read debug_abbrev_offset (4 or 8 bytes).
+ if (this->offset_size_ == 4)
+ abbrev_offset = elfcpp::Swap_unaligned<32, big_endian>::readval(pinfo);
+@@ -1333,13 +1556,14 @@ Dwarf_info_reader::do_parse()
+ }
+ pinfo += this->offset_size_;
+
+- // Read address_size (1 byte).
+- this->address_size_ = *pinfo++;
++ // DWARF 2-4: Read address_size (1 byte).
++ if (this->cu_version_ < 5)
++ this->address_size_ = *pinfo++;
+
+ // For type units, read the two extra fields.
+ uint64_t signature = 0;
+ off_t type_offset = 0;
+- if (this->is_type_unit_)
++ if (this->is_type_unit())
+ {
+ if (!this->check_buffer(pinfo + 8 + this->offset_size_))
+ break;
+@@ -1369,7 +1593,7 @@ Dwarf_info_reader::do_parse()
+ if (root_die.tag() != 0)
+ {
+ // Visit the CU or TU.
+- if (this->is_type_unit_)
++ if (this->is_type_unit())
+ this->visit_type_unit(section_offset + this->cu_offset_,
+ cu_end - cu_start, type_offset, signature,
+ &root_die);
+@@ -1460,6 +1684,19 @@ Dwarf_info_reader::read_from_pointer(const unsigned char** source)
+ return return_value;
+ }
+
++// Read a 3-byte integer. Update SOURCE after read.
++inline typename elfcpp::Valtype_base<32>::Valtype
++Dwarf_info_reader::read_3bytes_from_pointer(const unsigned char** source)
++{
++ typename elfcpp::Valtype_base<32>::Valtype return_value;
++ if (this->object_->is_big_endian())
++ return_value = ((*source)[0] << 16) | ((*source)[1] << 8) | (*source)[2];
++ else
++ return_value = ((*source)[2] << 16) | ((*source)[1] << 8) | (*source)[0];
++ *source += 3;
++ return return_value;
++}
++
+ // Look for a relocation at offset ATTR_OFF in the dwarf info,
+ // and return the section index and offset of the target.
+
+@@ -1561,27 +1798,40 @@ Sized_dwarf_line_info<size, big_endian>::Sized_dwarf_line_info(
+ Object* object,
+ unsigned int read_shndx)
+ : data_valid_(false), buffer_(NULL), buffer_start_(NULL),
++ str_buffer_(NULL), str_buffer_start_(NULL),
+ reloc_mapper_(NULL), symtab_buffer_(NULL), directories_(), files_(),
+- current_header_index_(-1)
++ current_header_index_(-1), reloc_map_(), line_number_map_()
+ {
+- unsigned int debug_shndx;
++ unsigned int debug_line_shndx = 0;
++ unsigned int debug_line_str_shndx = 0;
+
+- for (debug_shndx = 1; debug_shndx < object->shnum(); ++debug_shndx)
++ for (unsigned int i = 1; i < object->shnum(); ++i)
+ {
++ section_size_type buffer_size;
++ bool is_new = false;
++
+ // FIXME: do this more efficiently: section_name() isn't super-fast
+- std::string name = object->section_name(debug_shndx);
++ std::string name = object->section_name(i);
+ if (name == ".debug_line" || name == ".zdebug_line")
+ {
+- section_size_type buffer_size;
+- bool is_new = false;
+- this->buffer_ = object->decompressed_section_contents(debug_shndx,
+- &buffer_size,
+- &is_new);
++ this->buffer_ =
++ object->decompressed_section_contents(i, &buffer_size, &is_new);
+ if (is_new)
+ this->buffer_start_ = this->buffer_;
+ this->buffer_end_ = this->buffer_ + buffer_size;
+- break;
++ debug_line_shndx = i;
++ }
++ else if (name == ".debug_line_str" || name == ".zdebug_line_str")
++ {
++ this->str_buffer_ =
++ object->decompressed_section_contents(i, &buffer_size, &is_new);
++ if (is_new)
++ this->str_buffer_start_ = this->str_buffer_;
++ this->str_buffer_end_ = this->str_buffer_ + buffer_size;
++ debug_line_str_shndx = i;
+ }
++ if (debug_line_shndx > 0 && debug_line_str_shndx > 0)
++ break;
+ }
+ if (this->buffer_ == NULL)
+ return;
+@@ -1594,7 +1844,7 @@ Sized_dwarf_line_info<size, big_endian>::Sized_dwarf_line_info(
+ unsigned int reloc_sh_type = object->section_type(i);
+ if ((reloc_sh_type == elfcpp::SHT_REL
+ || reloc_sh_type == elfcpp::SHT_RELA)
+- && object->section_info(i) == debug_shndx)
++ && object->section_info(i) == debug_line_shndx)
+ {
+ reloc_shndx = i;
+ this->track_relocs_type_ = reloc_sh_type;
+@@ -1640,65 +1890,80 @@ Sized_dwarf_line_info<size, big_endian>::read_header_prolog(
+ uint32_t initial_length = elfcpp::Swap_unaligned<32, big_endian>::readval(lineptr);
+ lineptr += 4;
+
+- // In DWARF2/3, if the initial length is all 1 bits, then the offset
++ // In DWARF, if the initial length is all 1 bits, then the offset
+ // size is 8 and we need to read the next 8 bytes for the real length.
+ if (initial_length == 0xffffffff)
+ {
+- header_.offset_size = 8;
++ this->header_.offset_size = 8;
+ initial_length = elfcpp::Swap_unaligned<64, big_endian>::readval(lineptr);
+ lineptr += 8;
+ }
+ else
+- header_.offset_size = 4;
++ this->header_.offset_size = 4;
+
+- header_.total_length = initial_length;
++ this->header_.total_length = initial_length;
+
+- gold_assert(lineptr + header_.total_length <= buffer_end_);
++ this->end_of_unit_ = lineptr + initial_length;
++ gold_assert(this->end_of_unit_ <= buffer_end_);
+
+- header_.version = elfcpp::Swap_unaligned<16, big_endian>::readval(lineptr);
++ this->header_.version =
++ elfcpp::Swap_unaligned<16, big_endian>::readval(lineptr);
+ lineptr += 2;
+
+- // Skip address size and segment selector for DWARF5.
+- if (header_.version >= 5)
+- lineptr += 2;
++ // We can only read versions 2-5 of the DWARF line number table.
++ // For other versions, just skip the entire line number table.
++ if (this->header_.version < 2 || this->header_.version > 5)
++ return this->end_of_unit_;
+
+- if (header_.offset_size == 4)
+- header_.prologue_length = elfcpp::Swap_unaligned<32, big_endian>::readval(lineptr);
++ // DWARF 5 only: address size and segment selector.
++ if (this->header_.version >= 5)
++ {
++ this->header_.address_size = *lineptr;
++ // We ignore the segment selector.
++ lineptr += 2;
++ }
++
++ if (this->header_.offset_size == 4)
++ this->header_.prologue_length =
++ elfcpp::Swap_unaligned<32, big_endian>::readval(lineptr);
+ else
+- header_.prologue_length = elfcpp::Swap_unaligned<64, big_endian>::readval(lineptr);
+- lineptr += header_.offset_size;
++ this->header_.prologue_length =
++ elfcpp::Swap_unaligned<64, big_endian>::readval(lineptr);
++ lineptr += this->header_.offset_size;
+
+- header_.min_insn_length = *lineptr;
++ this->end_of_header_length_ = lineptr;
++
++ this->header_.min_insn_length = *lineptr;
+ lineptr += 1;
+
+- if (header_.version < 4)
+- header_.max_ops_per_insn = 1;
++ if (this->header_.version < 4)
++ this->header_.max_ops_per_insn = 1;
+ else
+ {
+ // DWARF 4 added the maximum_operations_per_instruction field.
+- header_.max_ops_per_insn = *lineptr;
++ this->header_.max_ops_per_insn = *lineptr;
+ lineptr += 1;
+ // TODO: Add support for values other than 1.
+- gold_assert(header_.max_ops_per_insn == 1);
++ gold_assert(this->header_.max_ops_per_insn == 1);
+ }
+
+- header_.default_is_stmt = *lineptr;
++ this->header_.default_is_stmt = *lineptr;
+ lineptr += 1;
+
+- header_.line_base = *reinterpret_cast<const signed char*>(lineptr);
++ this->header_.line_base = *reinterpret_cast<const signed char*>(lineptr);
+ lineptr += 1;
+
+- header_.line_range = *lineptr;
++ this->header_.line_range = *lineptr;
+ lineptr += 1;
+
+- header_.opcode_base = *lineptr;
++ this->header_.opcode_base = *lineptr;
+ lineptr += 1;
+
+- header_.std_opcode_lengths.resize(header_.opcode_base + 1);
+- header_.std_opcode_lengths[0] = 0;
+- for (int i = 1; i < header_.opcode_base; i++)
++ this->header_.std_opcode_lengths.resize(this->header_.opcode_base + 1);
++ this->header_.std_opcode_lengths[0] = 0;
++ for (int i = 1; i < this->header_.opcode_base; i++)
+ {
+- header_.std_opcode_lengths[i] = *lineptr;
++ this->header_.std_opcode_lengths[i] = *lineptr;
+ lineptr += 1;
+ }
+
+@@ -1707,10 +1972,11 @@ Sized_dwarf_line_info<size, big_endian>::read_header_prolog(
+
+ // The header for a debug_line section is mildly complicated, because
+ // the line info is very tightly encoded.
++// This routine is for DWARF versions 2, 3, and 4.
+
+ template<int size, bool big_endian>
+ const unsigned char*
+-Sized_dwarf_line_info<size, big_endian>::read_header_tables(
++Sized_dwarf_line_info<size, big_endian>::read_header_tables_v2(
+ const unsigned char* lineptr)
+ {
+ ++this->current_header_index_;
+@@ -1775,6 +2041,169 @@ Sized_dwarf_line_info<size, big_endian>::read_header_tables(
+ return lineptr;
+ }
+
++// This routine is for DWARF version 5.
++
++template<int size, bool big_endian>
++const unsigned char*
++Sized_dwarf_line_info<size, big_endian>::read_header_tables_v5(
++ const unsigned char* lineptr)
++{
++ size_t len;
++
++ ++this->current_header_index_;
++
++ gold_assert(static_cast<int>(this->directories_.size())
++ == this->current_header_index_);
++ gold_assert(static_cast<int>(this->files_.size())
++ == this->current_header_index_);
++
++ // Read the directory list.
++ unsigned int format_count = *lineptr;
++ lineptr += 1;
++
++ unsigned int *types = new unsigned int[format_count];
++ unsigned int *forms = new unsigned int[format_count];
++
++ for (unsigned int i = 0; i < format_count; i++)
++ {
++ types[i] = read_unsigned_LEB_128(lineptr, &len);
++ lineptr += len;
++ forms[i] = read_unsigned_LEB_128(lineptr, &len);
++ lineptr += len;
++ }
++
++ uint64_t entry_count = read_unsigned_LEB_128(lineptr, &len);
++ lineptr += len;
++ this->directories_.push_back(std::vector<std::string>(0));
++ std::vector<std::string>& dir_list = this->directories_.back();
++
++ for (unsigned int j = 0; j < entry_count; j++)
++ {
++ std::string dirname;
++
++ for (unsigned int i = 0; i < format_count; i++)
++ {
++ if (types[i] == elfcpp::DW_LNCT_path)
++ {
++ if (forms[i] == elfcpp::DW_FORM_string)
++ {
++ dirname = reinterpret_cast<const char*>(lineptr);
++ lineptr += dirname.size() + 1;
++ }
++ else if (forms[i] == elfcpp::DW_FORM_line_strp)
++ {
++ uint64_t offset;
++ if (this->header_.offset_size == 4)
++ offset =
++ elfcpp::Swap_unaligned<32, big_endian>::readval(lineptr);
++ else
++ offset =
++ elfcpp::Swap_unaligned<64, big_endian>::readval(lineptr);
++ typename Reloc_map::const_iterator it
++ = this->reloc_map_.find(lineptr - this->buffer_);
++ if (it != reloc_map_.end())
++ {
++ if (this->track_relocs_type_ == elfcpp::SHT_RELA)
++ offset = 0;
++ offset += it->second.second;
++ }
++ lineptr += this->header_.offset_size;
++ dirname = reinterpret_cast<const char*>(this->str_buffer_
++ + offset);
++ }
++ else
++ return lineptr;
++ }
++ else
++ return lineptr;
++ }
++ dir_list.push_back(dirname);
++ }
++
++ delete[] types;
++ delete[] forms;
++
++ // Read the filenames list.
++ format_count = *lineptr;
++ lineptr += 1;
++
++ types = new unsigned int[format_count];
++ forms = new unsigned int[format_count];
++
++ for (unsigned int i = 0; i < format_count; i++)
++ {
++ types[i] = read_unsigned_LEB_128(lineptr, &len);
++ lineptr += len;
++ forms[i] = read_unsigned_LEB_128(lineptr, &len);
++ lineptr += len;
++ }
++
++ entry_count = read_unsigned_LEB_128(lineptr, &len);
++ lineptr += len;
++ this->files_.push_back(
++ std::vector<std::pair<int, std::string> >(0));
++ std::vector<std::pair<int, std::string> >& file_list = this->files_.back();
++
++ for (unsigned int j = 0; j < entry_count; j++)
++ {
++ const char* path = NULL;
++ int dirindex = 0;
++
++ for (unsigned int i = 0; i < format_count; i++)
++ {
++ if (types[i] == elfcpp::DW_LNCT_path)
++ {
++ if (forms[i] == elfcpp::DW_FORM_string)
++ {
++ path = reinterpret_cast<const char*>(lineptr);
++ lineptr += strlen(path) + 1;
++ }
++ else if (forms[i] == elfcpp::DW_FORM_line_strp)
++ {
++ uint64_t offset;
++ if (this->header_.offset_size == 4)
++ offset = elfcpp::Swap_unaligned<32, big_endian>::readval(lineptr);
++ else
++ offset = elfcpp::Swap_unaligned<64, big_endian>::readval(lineptr);
++ typename Reloc_map::const_iterator it
++ = this->reloc_map_.find(lineptr - this->buffer_);
++ if (it != reloc_map_.end())
++ {
++ if (this->track_relocs_type_ == elfcpp::SHT_RELA)
++ offset = 0;
++ offset += it->second.second;
++ }
++ lineptr += this->header_.offset_size;
++ path = reinterpret_cast<const char*>(this->str_buffer_
++ + offset);
++ }
++ else
++ return lineptr;
++ }
++ else if (types[i] == elfcpp::DW_LNCT_directory_index)
++ {
++ if (forms[i] == elfcpp::DW_FORM_udata)
++ {
++ dirindex = read_unsigned_LEB_128(lineptr, &len);
++ lineptr += len;
++ }
++ else
++ return lineptr;
++ }
++ else
++ return lineptr;
++ }
++ gold_debug(DEBUG_LOCATION, "File %3d: %s",
++ static_cast<int>(file_list.size()), path);
++ file_list.push_back(std::make_pair(dirindex, path));
++ }
++
++ delete[] types;
++ delete[] forms;
++
++ return lineptr;
++}
++
+ // Process a single opcode in the .debug.line structure.
+
+ template<int size, bool big_endian>
+@@ -1790,15 +2219,15 @@ Sized_dwarf_line_info<size, big_endian>::process_one_opcode(
+
+ // If the opcode is great than the opcode_base, it is a special
+ // opcode. Most line programs consist mainly of special opcodes.
+- if (opcode >= header_.opcode_base)
++ if (opcode >= this->header_.opcode_base)
+ {
+- opcode -= header_.opcode_base;
+- const int advance_address = ((opcode / header_.line_range)
+- * header_.min_insn_length);
++ opcode -= this->header_.opcode_base;
++ const int advance_address = ((opcode / this->header_.line_range)
++ * this->header_.min_insn_length);
+ lsm->address += advance_address;
+
+- const int advance_line = ((opcode % header_.line_range)
+- + header_.line_base);
++ const int advance_line = ((opcode % this->header_.line_range)
++ + this->header_.line_base);
+ lsm->line_num += advance_line;
+ lsm->basic_block = true;
+ *len = oplen;
+@@ -1818,13 +2247,13 @@ Sized_dwarf_line_info<size, big_endian>::process_one_opcode(
+ const uint64_t advance_address
+ = read_unsigned_LEB_128(start, &templen);
+ oplen += templen;
+- lsm->address += header_.min_insn_length * advance_address;
++ lsm->address += this->header_.min_insn_length * advance_address;
+ }
+ break;
+
+ case elfcpp::DW_LNS_advance_line:
+ {
+- const uint64_t advance_line = read_signed_LEB_128(start, &templen);
++ const int64_t advance_line = read_signed_LEB_128(start, &templen);
+ oplen += templen;
+ lsm->line_num += advance_line;
+ }
+@@ -1865,9 +2294,9 @@ Sized_dwarf_line_info<size, big_endian>::process_one_opcode(
+
+ case elfcpp::DW_LNS_const_add_pc:
+ {
+- const int advance_address = (header_.min_insn_length
+- * ((255 - header_.opcode_base)
+- / header_.line_range));
++ const int advance_address = (this->header_.min_insn_length
++ * ((255 - this->header_.opcode_base)
++ / this->header_.line_range));
+ lsm->address += advance_address;
+ }
+ break;
+@@ -1950,7 +2379,7 @@ Sized_dwarf_line_info<size, big_endian>::process_one_opcode(
+ default:
+ {
+ // Ignore unknown opcode silently
+- for (int i = 0; i < header_.std_opcode_lengths[opcode]; i++)
++ for (int i = 0; i < this->header_.std_opcode_lengths[opcode]; i++)
+ {
+ size_t templen;
+ read_unsigned_LEB_128(start, &templen);
+@@ -1970,28 +2399,24 @@ Sized_dwarf_line_info<size, big_endian>::process_one_opcode(
+ template<int size, bool big_endian>
+ unsigned const char*
+ Sized_dwarf_line_info<size, big_endian>::read_lines(unsigned const char* lineptr,
++ unsigned const char* endptr,
+ unsigned int shndx)
+ {
+ struct LineStateMachine lsm;
+
+- // LENGTHSTART is the place the length field is based on. It is the
+- // point in the header after the initial length field.
+- const unsigned char* lengthstart = buffer_;
+-
+- // In 64 bit dwarf, the initial length is 12 bytes, because of the
+- // 0xffffffff at the start.
+- if (header_.offset_size == 8)
+- lengthstart += 12;
+- else
+- lengthstart += 4;
+-
+- while (lineptr < lengthstart + header_.total_length)
++ while (lineptr < endptr)
+ {
+- ResetLineStateMachine(&lsm, header_.default_is_stmt);
++ ResetLineStateMachine(&lsm, this->header_.default_is_stmt);
+ while (!lsm.end_sequence)
+ {
+ size_t oplength;
++
++ if (lineptr >= endptr)
++ break;
++
+ bool add_line = this->process_one_opcode(lineptr, &lsm, &oplength);
++ lineptr += oplength;
++
+ if (add_line
+ && (shndx == -1U || lsm.shndx == -1U || shndx == lsm.shndx))
+ {
+@@ -2012,11 +2437,10 @@ Sized_dwarf_line_info<size, big_endian>::read_lines(unsigned const char* lineptr
+ map.back().last_line_for_offset = false;
+ map.push_back(entry);
+ }
+- lineptr += oplength;
+ }
+ }
+
+- return lengthstart + header_.total_length;
++ return endptr;
+ }
+
+ // Read the relocations into a Reloc_map.
+@@ -2057,9 +2481,17 @@ Sized_dwarf_line_info<size, big_endian>::read_line_mappings(unsigned int shndx)
+ {
+ const unsigned char* lineptr = this->buffer_;
+ lineptr = this->read_header_prolog(lineptr);
+- lineptr = this->read_header_tables(lineptr);
+- lineptr = this->read_lines(lineptr, shndx);
+- this->buffer_ = lineptr;
++ if (this->header_.version >= 2 && this->header_.version <= 4)
++ {
++ lineptr = this->read_header_tables_v2(lineptr);
++ lineptr = this->read_lines(lineptr, this->end_of_unit_, shndx);
++ }
++ else if (this->header_.version == 5)
++ {
++ lineptr = this->read_header_tables_v5(lineptr);
++ lineptr = this->read_lines(lineptr, this->end_of_unit_, shndx);
++ }
++ this->buffer_ = this->end_of_unit_;
+ }
+
+ // Sort the lines numbers, so addr2line can use binary search.
+@@ -2215,6 +2647,9 @@ Sized_dwarf_line_info<size, big_endian>::do_addr2line(
+ off_t offset,
+ std::vector<std::string>* other_lines)
+ {
++ gold_debug(DEBUG_LOCATION, "do_addr2line: shndx %u offset %08x",
++ shndx, static_cast<int>(offset));
++
+ if (this->data_valid_ == false)
+ return "";
+
+diff --git a/gold/dwarf_reader.h b/gold/dwarf_reader.h
+index 80b2231327c..921a1f7c876 100644
+--- a/gold/dwarf_reader.h
++++ b/gold/dwarf_reader.h
+@@ -173,11 +173,12 @@ class Dwarf_abbrev_table
+ // An attribute list entry.
+ struct Attribute
+ {
+- Attribute(unsigned int a, unsigned int f)
+- : attr(a), form(f)
++ Attribute(unsigned int a, unsigned int f, int c)
++ : attr(a), form(f), implicit_const(c)
+ { }
+ unsigned int attr;
+ unsigned int form;
++ int implicit_const;
+ };
+
+ // An abbrev code entry.
+@@ -190,9 +191,9 @@ class Dwarf_abbrev_table
+ }
+
+ void
+- add_attribute(unsigned int attr, unsigned int form)
++ add_attribute(unsigned int attr, unsigned int form, int implicit_const)
+ {
+- this->attributes.push_back(Attribute(attr, form));
++ this->attributes.push_back(Attribute(attr, form, implicit_const));
+ }
+
+ // The DWARF tag.
+@@ -349,14 +350,15 @@ class Dwarf_ranges_table
+ delete this->ranges_reloc_mapper_;
+ }
+
+- // Read the ranges table from an object file.
++ // Fetch the contents of the ranges table from an object file.
+ bool
+ read_ranges_table(Relobj* object,
+ const unsigned char* symtab,
+ off_t symtab_size,
+- unsigned int ranges_shndx);
++ unsigned int ranges_shndx,
++ unsigned int version);
+
+- // Read the range table from an object file.
++ // Read the DWARF 2/3/4 range table.
+ Dwarf_range_list*
+ read_range_list(Relobj* object,
+ const unsigned char* symtab,
+@@ -365,6 +367,15 @@ class Dwarf_ranges_table
+ unsigned int ranges_shndx,
+ off_t ranges_offset);
+
++ // Read the DWARF 5 rnglists table.
++ Dwarf_range_list*
++ read_range_list_v5(Relobj* object,
++ const unsigned char* symtab,
++ off_t symtab_size,
++ unsigned int address_size,
++ unsigned int ranges_shndx,
++ off_t ranges_offset);
++
+ // Look for a relocation at offset OFF in the range table,
+ // and return the section index and offset of the target.
+ unsigned int
+@@ -490,8 +501,6 @@ class Dwarf_die
+ unsigned int shndx;
+ // Block length for block forms.
+ unsigned int blocklen;
+- // Attribute offset for DW_FORM_strp.
+- unsigned int attr_off;
+ } aux;
+ };
+
+@@ -684,6 +693,10 @@ class Dwarf_die
+ // calls the various visit_xxx() methods for each header. Clients
+ // should derive a new class from this one and implement the
+ // visit_compilation_unit() and visit_type_unit() functions.
++// IS_TYPE_UNIT is true if we are reading from a .debug_types section,
++// which is used only in DWARF 4. For DWARF 5, it will be false,
++// and we will determine whether it's a type init when we parse the
++// header.
+
+ class Dwarf_info_reader
+ {
+@@ -695,7 +708,7 @@ class Dwarf_info_reader
+ unsigned int shndx,
+ unsigned int reloc_shndx,
+ unsigned int reloc_type)
+- : is_type_unit_(is_type_unit), object_(object), symtab_(symtab),
++ : object_(object), symtab_(symtab),
+ symtab_size_(symtab_size), shndx_(shndx), reloc_shndx_(reloc_shndx),
+ reloc_type_(reloc_type), abbrev_shndx_(0), string_shndx_(0),
+ buffer_(NULL), buffer_end_(NULL), cu_offset_(0), cu_length_(0),
+@@ -703,7 +716,12 @@ class Dwarf_info_reader
+ abbrev_table_(), ranges_table_(this),
+ reloc_mapper_(NULL), string_buffer_(NULL), string_buffer_end_(NULL),
+ owns_string_buffer_(false), string_output_section_offset_(0)
+- { }
++ {
++ // For DWARF 4, we infer the unit type from the section name.
++ // For DWARF 5, we will read this from the unit header.
++ this->unit_type_ =
++ (is_type_unit ? elfcpp::DW_UT_type : elfcpp::DW_UT_compile);
++ }
+
+ virtual
+ ~Dwarf_info_reader()
+@@ -714,6 +732,13 @@ class Dwarf_info_reader
+ delete[] this->string_buffer_;
+ }
+
++ bool
++ is_type_unit() const
++ {
++ return (this->unit_type_ == elfcpp::DW_UT_type
++ || this->unit_type_ == elfcpp::DW_UT_split_type);
++ }
++
+ // Begin parsing the debug info. This calls visit_compilation_unit()
+ // or visit_type_unit() for each compilation or type unit found in the
+ // section, and visit_die() for each top-level DIE.
+@@ -745,6 +770,9 @@ class Dwarf_info_reader
+ inline typename elfcpp::Valtype_base<valsize>::Valtype
+ read_from_pointer(const unsigned char** source);
+
++ inline typename elfcpp::Valtype_base<32>::Valtype
++ read_3bytes_from_pointer(const unsigned char** source);
++
+ // Look for a relocation at offset ATTR_OFF in the dwarf info,
+ // and return the section index and offset of the target.
+ unsigned int
+@@ -818,12 +846,20 @@ class Dwarf_info_reader
+ Dwarf_range_list*
+ read_range_list(unsigned int ranges_shndx, off_t ranges_offset)
+ {
+- return this->ranges_table_.read_range_list(this->object_,
+- this->symtab_,
+- this->symtab_size_,
+- this->address_size_,
+- ranges_shndx,
+- ranges_offset);
++ if (this->cu_version_ < 5)
++ return this->ranges_table_.read_range_list(this->object_,
++ this->symtab_,
++ this->symtab_size_,
++ this->address_size_,
++ ranges_shndx,
++ ranges_offset);
++ else
++ return this->ranges_table_.read_range_list_v5(this->object_,
++ this->symtab_,
++ this->symtab_size_,
++ this->address_size_,
++ ranges_shndx,
++ ranges_offset);
+ }
+
+ // Return the object.
+@@ -873,8 +909,8 @@ class Dwarf_info_reader
+ bool
+ do_read_string_table(unsigned int string_shndx);
+
+- // True if this is a type unit; false for a compilation unit.
+- bool is_type_unit_;
++ // The unit type (DW_UT_xxx).
++ unsigned int unit_type_;
+ // The object containing the .debug_info or .debug_types input section.
+ Relobj* object_;
+ // The ELF symbol table.
+@@ -1008,6 +1044,8 @@ class Sized_dwarf_line_info : public Dwarf_line_info
+ {
+ if (this->buffer_start_ != NULL)
+ delete[] this->buffer_start_;
++ if (this->str_buffer_start_ != NULL)
++ delete[] this->str_buffer_start_;
+ }
+
+ private:
+@@ -1030,19 +1068,23 @@ class Sized_dwarf_line_info : public Dwarf_line_info
+ void
+ read_relocs();
+
+- // Reads the DWARF2/3 header for this line info. Each takes as input
++ // Reads the DWARF header for this line info. Each takes as input
+ // a starting buffer position, and returns the ending position.
+ const unsigned char*
+ read_header_prolog(const unsigned char* lineptr);
+
+ const unsigned char*
+- read_header_tables(const unsigned char* lineptr);
++ read_header_tables_v2(const unsigned char* lineptr);
++
++ const unsigned char*
++ read_header_tables_v5(const unsigned char* lineptr);
+
+- // Reads the DWARF2/3 line information. If shndx is non-negative,
++ // Reads the DWARF line information. If shndx is non-negative,
+ // discard all line information that doesn't pertain to the given
+ // section.
+ const unsigned char*
+- read_lines(const unsigned char* lineptr, unsigned int shndx);
++ read_lines(const unsigned char* lineptr, const unsigned char* endptr,
++ unsigned int shndx);
+
+ // Process a single line info opcode at START using the state
+ // machine at LSM. Return true if we should define a line using the
+@@ -1069,6 +1111,7 @@ class Sized_dwarf_line_info : public Dwarf_line_info
+ {
+ off_t total_length;
+ int version;
++ int address_size;
+ off_t prologue_length;
+ int min_insn_length; // insn stands for instruction
+ int max_ops_per_insn; // Added in DWARF-4.
+@@ -1089,6 +1132,20 @@ class Sized_dwarf_line_info : public Dwarf_line_info
+ // of the buffer.
+ const unsigned char* buffer_start_;
+
++ // str_buffer is the buffer for the line table strings.
++ const unsigned char* str_buffer_;
++ const unsigned char* str_buffer_end_;
++ // If the buffer was allocated temporarily, and therefore must be
++ // deallocated in the dtor, this contains a pointer to the start
++ // of the buffer.
++ const unsigned char* str_buffer_start_;
++
++ // Pointer to the end of the header_length field (aka prologue_length).
++ const unsigned char* end_of_header_length_;
++
++ // Pointer to the end of the current compilation unit.
++ const unsigned char* end_of_unit_;
++
+ // This has relocations that point into buffer.
+ Sized_elf_reloc_mapper<size, big_endian>* reloc_mapper_;
+ // The type of the reloc section in track_relocs_--SHT_REL or SHT_RELA.
diff --git a/poky/meta/recipes-devtools/bison/bison_3.7.5.bb b/poky/meta/recipes-devtools/bison/bison_3.7.5.bb
deleted file mode 100644
index c8bbea4..0000000
--- a/poky/meta/recipes-devtools/bison/bison_3.7.5.bb
+++ /dev/null
@@ -1,38 +0,0 @@
-SUMMARY = "GNU Project parser generator (yacc replacement)"
-DESCRIPTION = "Bison is a general-purpose parser generator that converts an annotated context-free grammar into \
-an LALR(1) or GLR parser for that grammar. Bison is upward compatible with Yacc: all properly-written Yacc \
-grammars ought to work with Bison with no change. Anyone familiar with Yacc should be able to use Bison with \
-little trouble."
-HOMEPAGE = "http://www.gnu.org/software/bison/"
-LICENSE = "GPLv3"
-LIC_FILES_CHKSUM = "file://COPYING;md5=d32239bcb673463ab874e80d47fae504"
-SECTION = "devel"
-DEPENDS = "bison-native flex-native"
-
-SRC_URI = "${GNU_MIRROR}/bison/bison-${PV}.tar.xz \
- file://add-with-bisonlocaledir.patch \
- file://0001-Use-mapped-file-name-for-symbols.patch \
- "
-SRC_URI[sha256sum] = "e8c53bc5bc396d636622d0f25e31ca92fd53f00b09629f13ef540d564a6b31ab"
-
-# No point in hardcoding path to m4, just use PATH
-EXTRA_OECONF += "M4=m4"
-
-inherit autotools gettext texinfo
-
-# The automatic m4 path detection gets confused, so force the right value
-acpaths = "-I ./m4"
-
-do_compile_prepend() {
- for i in mfcalc calc++ rpcalc; do mkdir -p ${B}/examples/$i; done
-}
-
-do_install_append_class-native() {
- create_wrapper ${D}/${bindir}/bison \
- BISON_PKGDATADIR=${STAGING_DATADIR_NATIVE}/bison
-}
-do_install_append_class-nativesdk() {
- create_wrapper ${D}/${bindir}/bison \
- BISON_PKGDATADIR=${datadir}/bison
-}
-BBCLASSEXTEND = "native nativesdk"
diff --git a/poky/meta/recipes-devtools/bison/bison_3.7.6.bb b/poky/meta/recipes-devtools/bison/bison_3.7.6.bb
new file mode 100644
index 0000000..a8d57f2
--- /dev/null
+++ b/poky/meta/recipes-devtools/bison/bison_3.7.6.bb
@@ -0,0 +1,53 @@
+SUMMARY = "GNU Project parser generator (yacc replacement)"
+DESCRIPTION = "Bison is a general-purpose parser generator that converts an annotated context-free grammar into \
+an LALR(1) or GLR parser for that grammar. Bison is upward compatible with Yacc: all properly-written Yacc \
+grammars ought to work with Bison with no change. Anyone familiar with Yacc should be able to use Bison with \
+little trouble."
+HOMEPAGE = "http://www.gnu.org/software/bison/"
+LICENSE = "GPLv3"
+LIC_FILES_CHKSUM = "file://COPYING;md5=1ebbd3e34237af26da5dc08a4e440464"
+SECTION = "devel"
+DEPENDS = "bison-native flex-native"
+
+SRC_URI = "${GNU_MIRROR}/bison/bison-${PV}.tar.xz \
+ file://add-with-bisonlocaledir.patch \
+ file://0001-Use-mapped-file-name-for-symbols.patch \
+ "
+SRC_URI[sha256sum] = "67d68ce1e22192050525643fc0a7a22297576682bef6a5c51446903f5aeef3cf"
+
+inherit autotools gettext texinfo
+
+# No point in hardcoding path to m4, just use PATH
+CACHED_CONFIGUREVARS = "ac_cv_path_M4=m4"
+
+PACKAGECONFIG ??= "readline ${@ 'textstyle' if d.getVar('USE_NLS') == 'yes' else ''}"
+PACKAGECONFIG_class-native ??= ""
+
+# Make readline and textstyle optional. There are recipie for these, but leave them
+# disabled for the native recipe. This prevents host contamination of the native tool.
+PACKAGECONFIG[readline] = "--with-libreadline-prefix,--without-libreadline-prefix,readline"
+PACKAGECONFIG[textstyle] = "--with-libtextstyle-prefix,--without-libtextstyle-prefix,gettext"
+
+# Include the cached configure variables, configure is really good at finding
+# libreadline, even if we don't want it.
+CACHED_CONFIGUREVARS += "${@bb.utils.contains('PACKAGECONFIG', 'readline', '', ' \
+ ac_cv_header_readline_history_h=no \
+ ac_cv_header_readline_readline_h=no \
+ gl_cv_lib_readline=no', d)}"
+
+# The automatic m4 path detection gets confused, so force the right value
+acpaths = "-I ./m4"
+
+do_compile_prepend() {
+ for i in mfcalc calc++ rpcalc; do mkdir -p ${B}/examples/$i; done
+}
+
+do_install_append_class-native() {
+ create_wrapper ${D}/${bindir}/bison \
+ BISON_PKGDATADIR=${STAGING_DATADIR_NATIVE}/bison
+}
+do_install_append_class-nativesdk() {
+ create_wrapper ${D}/${bindir}/bison \
+ BISON_PKGDATADIR=${datadir}/bison
+}
+BBCLASSEXTEND = "native nativesdk"
diff --git a/poky/meta/recipes-devtools/btrfs-tools/btrfs-tools_5.11.1.bb b/poky/meta/recipes-devtools/btrfs-tools/btrfs-tools_5.12.1.bb
similarity index 92%
rename from poky/meta/recipes-devtools/btrfs-tools/btrfs-tools_5.11.1.bb
rename to poky/meta/recipes-devtools/btrfs-tools/btrfs-tools_5.12.1.bb
index b5e0561..3fc959b 100644
--- a/poky/meta/recipes-devtools/btrfs-tools/btrfs-tools_5.11.1.bb
+++ b/poky/meta/recipes-devtools/btrfs-tools/btrfs-tools_5.12.1.bb
@@ -7,10 +7,10 @@
HOMEPAGE = "https://btrfs.wiki.kernel.org"
-LICENSE = "GPLv2 & LGPLv3+"
+LICENSE = "GPLv2 & LGPLv2.1+"
LIC_FILES_CHKSUM = " \
file://COPYING;md5=fcb02dc552a041dee27e4b85c7396067 \
- file://libbtrfsutil/COPYING.LESSER;md5=3000208d539ec061b899bce1d9ce9404 \
+ file://libbtrfsutil/COPYING;md5=4fbd65380cdd255951079008b364516c \
"
SECTION = "base"
DEPENDS = "lzo util-linux zlib"
@@ -19,7 +19,7 @@
SRC_URI = "git://git.kernel.org/pub/scm/linux/kernel/git/kdave/btrfs-progs.git \
file://0001-Add-a-possibility-to-specify-where-python-modules-ar.patch \
"
-SRCREV = "8d5051f279f7994fb80536ef8f846f06d121d898"
+SRCREV = "96d77fcefdd3b9fd297b5aabbce6dc43e2315ee2"
S = "${WORKDIR}/git"
PACKAGECONFIG ??= " \
@@ -31,6 +31,7 @@
PACKAGECONFIG[manpages] = "--enable-documentation, --disable-documentation, asciidoc-native xmlto-native"
PACKAGECONFIG[programs] = "--enable-programs,--disable-programs"
PACKAGECONFIG[convert] = "--enable-convert --with-convert=ext2,--disable-convert --without-convert,e2fsprogs"
+PACKAGECONFIG[zoned] = "--enable-zoned,--disable-zoned"
PACKAGECONFIG[python] = "--enable-python,--disable-python,python3-setuptools-native"
PACKAGECONFIG[zstd] = "--enable-zstd,--disable-zstd,zstd"
diff --git a/poky/meta/recipes-devtools/ccache/ccache/0001-doc-allow-disabling-docs-man-page-generation.patch b/poky/meta/recipes-devtools/ccache/ccache/0001-doc-allow-disabling-docs-man-page-generation.patch
deleted file mode 100644
index 51ca0e8..0000000
--- a/poky/meta/recipes-devtools/ccache/ccache/0001-doc-allow-disabling-docs-man-page-generation.patch
+++ /dev/null
@@ -1,161 +0,0 @@
-From aebabafe085dd1b84027a1e31e5566c82528bd62 Mon Sep 17 00:00:00 2001
-From: Bastian Krause <bst@pengutronix.de>
-Date: Tue, 4 May 2021 11:41:56 +0200
-Subject: [PATCH] doc: allow disabling docs/man page generation
-
-The assumption that HTML documentation and manual pages should be
-generated if the required tools (asciidoc) are present is not always
-true. So add a cmake option that allows disabling the docs/man page
-generation. The default is to generate docs/man pages like before.
-
-Origin: https://github.com/ccache/ccache/pull/844
-Upstream-Status: Submitted
-Signed-off-by: Bastian Krause <bst@pengutronix.de>
----
- doc/CMakeLists.txt | 128 +++++++++++++++++++++++----------------------
- 1 file changed, 66 insertions(+), 62 deletions(-)
-
-diff --git a/doc/CMakeLists.txt b/doc/CMakeLists.txt
-index c5ce224d..74b7831b 100644
---- a/doc/CMakeLists.txt
-+++ b/doc/CMakeLists.txt
-@@ -1,70 +1,74 @@
-+option(BUILD_DOCS "Indicates whether HTML documentation and manual pages should be built or not" ON)
-+
- find_program(ASCIIDOC_EXE asciidoc)
- mark_as_advanced(ASCIIDOC_EXE) # Don't show in CMake UIs
-
--if(NOT ASCIIDOC_EXE)
-- message(WARNING "Could not find asciidoc; documentation will not be generated")
--else()
-- #
-- # HTML documentation
-- #
-- function(generate_html adoc_file)
-- get_filename_component(base_name "${adoc_file}" NAME_WE)
-- set(html_file "${base_name}.html")
-- add_custom_command(
-- OUTPUT "${html_file}"
-- COMMAND
-- ${ASCIIDOC_EXE}
-- -o "${html_file}"
-- -a revnumber="${CCACHE_VERSION}"
-- -a toc
-- -b xhtml11
-- "${CMAKE_SOURCE_DIR}/${adoc_file}"
-- MAIN_DEPENDENCY "${CMAKE_SOURCE_DIR}/${adoc_file}"
-- )
-- set(html_files "${html_files}" "${html_file}" PARENT_SCOPE)
-- endfunction()
-+if (BUILD_DOCS)
-+ if(NOT ASCIIDOC_EXE)
-+ message(WARNING "Could not find asciidoc; documentation will not be generated")
-+ else()
-+ #
-+ # HTML documentation
-+ #
-+ function(generate_html adoc_file)
-+ get_filename_component(base_name "${adoc_file}" NAME_WE)
-+ set(html_file "${base_name}.html")
-+ add_custom_command(
-+ OUTPUT "${html_file}"
-+ COMMAND
-+ ${ASCIIDOC_EXE}
-+ -o "${html_file}"
-+ -a revnumber="${CCACHE_VERSION}"
-+ -a toc
-+ -b xhtml11
-+ "${CMAKE_SOURCE_DIR}/${adoc_file}"
-+ MAIN_DEPENDENCY "${CMAKE_SOURCE_DIR}/${adoc_file}"
-+ )
-+ set(html_files "${html_files}" "${html_file}" PARENT_SCOPE)
-+ endfunction()
-
-- generate_html(LICENSE.adoc)
-- generate_html(doc/AUTHORS.adoc)
-- generate_html(doc/MANUAL.adoc)
-- generate_html(doc/NEWS.adoc)
-+ generate_html(LICENSE.adoc)
-+ generate_html(doc/AUTHORS.adoc)
-+ generate_html(doc/MANUAL.adoc)
-+ generate_html(doc/NEWS.adoc)
-
-- add_custom_target(doc-html DEPENDS "${html_files}")
-- set(doc_files "${html_files}")
-+ add_custom_target(doc-html DEPENDS "${html_files}")
-+ set(doc_files "${html_files}")
-
-- #
-- # Man page
-- #
-- find_program(A2X_EXE a2x)
-- mark_as_advanced(A2X_EXE) # Don't show in CMake UIs
-- if(NOT A2X_EXE)
-- message(WARNING "Could not find a2x; man page will not be generated")
-- else()
-- # MANUAL.adoc -> MANUAL.xml -> man page
-- add_custom_command(
-- OUTPUT MANUAL.xml
-- COMMAND
-- ${ASCIIDOC_EXE}
-- -o -
-- -a revnumber=${CCACHE_VERSION}
-- -d manpage
-- -b docbook "${CMAKE_SOURCE_DIR}/doc/MANUAL.adoc"
-- | perl -pe 's!<literal>\(.*?\)</literal>!<emphasis role="strong">\\1</emphasis>!g'
-- >MANUAL.xml
-- MAIN_DEPENDENCY "${CMAKE_SOURCE_DIR}/doc/MANUAL.adoc"
-- )
-- add_custom_command(
-- OUTPUT ccache.1
-- COMMAND ${A2X_EXE} --doctype manpage --format manpage MANUAL.xml
-- MAIN_DEPENDENCY MANUAL.xml
-- )
-- add_custom_target(doc-man-page DEPENDS ccache.1)
-- install(
-- FILES "${CMAKE_CURRENT_BINARY_DIR}/ccache.1"
-- DESTINATION "${CMAKE_INSTALL_MANDIR}/man1"
-- )
-- set(doc_files "${doc_files}" ccache.1)
-- endif()
-+ #
-+ # Man page
-+ #
-+ find_program(A2X_EXE a2x)
-+ mark_as_advanced(A2X_EXE) # Don't show in CMake UIs
-+ if(NOT A2X_EXE)
-+ message(WARNING "Could not find a2x; man page will not be generated")
-+ else()
-+ # MANUAL.adoc -> MANUAL.xml -> man page
-+ add_custom_command(
-+ OUTPUT MANUAL.xml
-+ COMMAND
-+ ${ASCIIDOC_EXE}
-+ -o -
-+ -a revnumber=${CCACHE_VERSION}
-+ -d manpage
-+ -b docbook "${CMAKE_SOURCE_DIR}/doc/MANUAL.adoc"
-+ | perl -pe 's!<literal>\(.*?\)</literal>!<emphasis role="strong">\\1</emphasis>!g'
-+ >MANUAL.xml
-+ MAIN_DEPENDENCY "${CMAKE_SOURCE_DIR}/doc/MANUAL.adoc"
-+ )
-+ add_custom_command(
-+ OUTPUT ccache.1
-+ COMMAND ${A2X_EXE} --doctype manpage --format manpage MANUAL.xml
-+ MAIN_DEPENDENCY MANUAL.xml
-+ )
-+ add_custom_target(doc-man-page DEPENDS ccache.1)
-+ install(
-+ FILES "${CMAKE_CURRENT_BINARY_DIR}/ccache.1"
-+ DESTINATION "${CMAKE_INSTALL_MANDIR}/man1"
-+ )
-+ set(doc_files "${doc_files}" ccache.1)
-+ endif()
-
-- add_custom_target(doc ALL DEPENDS "${doc_files}")
-+ add_custom_target(doc ALL DEPENDS "${doc_files}")
-+ endif()
- endif()
---
-2.29.2
-
diff --git a/poky/meta/recipes-devtools/ccache/ccache_4.2.1.bb b/poky/meta/recipes-devtools/ccache/ccache_4.3.bb
similarity index 72%
rename from poky/meta/recipes-devtools/ccache/ccache_4.2.1.bb
rename to poky/meta/recipes-devtools/ccache/ccache_4.3.bb
index 8dd5893..53a0bcf 100644
--- a/poky/meta/recipes-devtools/ccache/ccache_4.2.1.bb
+++ b/poky/meta/recipes-devtools/ccache/ccache_4.3.bb
@@ -11,10 +11,8 @@
DEPENDS = "zstd"
-SRC_URI = "https://github.com/ccache/ccache/releases/download/v${PV}/${BP}.tar.gz \
- file://0001-doc-allow-disabling-docs-man-page-generation.patch \
- "
-SRC_URI[sha256sum] = "320d2b17d2f76393e5d4bb28c8dee5ca783248e9cd23dff0654694d60f8a4b62"
+SRC_URI = "https://github.com/ccache/ccache/releases/download/v${PV}/${BP}.tar.gz"
+SRC_URI[sha256sum] = "b9789c42e52c73e99428f311a34def9ffec3462736439afd12dbacc7987c1533"
UPSTREAM_CHECK_URI = "https://github.com/ccache/ccache/releases/"
@@ -24,4 +22,4 @@
BBCLASSEXTEND = "native nativesdk"
-PACKAGECONFIG[docs] = "-DBUILD_DOCS=ON,-DBUILD_DOCS=OFF,asciidoc"
+PACKAGECONFIG[docs] = "-DENABLE_DOCUMENTATION=ON,-DENABLE_DOCUMENTATION=OFF,asciidoc"
diff --git a/poky/meta/recipes-devtools/cmake/cmake-native_3.19.5.bb b/poky/meta/recipes-devtools/cmake/cmake-native_3.20.2.bb
similarity index 97%
rename from poky/meta/recipes-devtools/cmake/cmake-native_3.19.5.bb
rename to poky/meta/recipes-devtools/cmake/cmake-native_3.20.2.bb
index d91e42e..335097d 100644
--- a/poky/meta/recipes-devtools/cmake/cmake-native_3.19.5.bb
+++ b/poky/meta/recipes-devtools/cmake/cmake-native_3.20.2.bb
@@ -1,7 +1,7 @@
require cmake.inc
inherit native
-DEPENDS += "bzip2-replacement-native xz-native zlib-native curl-native ncurses-native"
+DEPENDS += "bzip2-replacement-native xz-native zlib-native curl-native ncurses-native zstd-native"
SRC_URI += "file://OEToolchainConfig.cmake \
file://environment.d-cmake.sh \
diff --git a/poky/meta/recipes-devtools/cmake/cmake.inc b/poky/meta/recipes-devtools/cmake/cmake.inc
index e0f59a6..be43760 100644
--- a/poky/meta/recipes-devtools/cmake/cmake.inc
+++ b/poky/meta/recipes-devtools/cmake/cmake.inc
@@ -10,19 +10,18 @@
BUGTRACKER = "http://public.kitware.com/Bug/my_view_page.php"
SECTION = "console/utils"
LICENSE = "BSD-3-Clause"
-LIC_FILES_CHKSUM = "file://Copyright.txt;md5=c721f56fce89ba2eadc2fdd8ba1f4d83 \
+LIC_FILES_CHKSUM = "file://Copyright.txt;md5=31023e1d3f51ca90a58f55bcee8e2339 \
file://Source/cmake.h;beginline=1;endline=2;md5=a5f70e1fef8614734eae0d62b4f5891b \
"
CMAKE_MAJOR_VERSION = "${@'.'.join(d.getVar('PV').split('.')[0:2])}"
SRC_URI = "https://cmake.org/files/v${CMAKE_MAJOR_VERSION}/cmake-${PV}.tar.gz \
- file://0002-cmake-Prevent-the-detection-of-Qt5.patch \
file://0003-cmake-support-OpenEmbedded-Qt4-tool-binary-names.patch \
file://0004-Fail-silently-if-system-Qt-installation-is-broken.patch \
"
-SRC_URI[sha256sum] = "c432296eb5dec6d71eae15d140f6297d63df44e9ffe3e453628d1dc8fc4201ce"
+SRC_URI[sha256sum] = "aecf6ecb975179eb3bb6a4a50cae192d41e92b9372b02300f9e8f1d5f559544e"
UPSTREAM_CHECK_REGEX = "cmake-(?P<pver>\d+(\.\d+)+)\.tar"
diff --git a/poky/meta/recipes-devtools/cmake/cmake/0001-CMakeDetermineSystem-use-oe-environment-vars-to-load.patch b/poky/meta/recipes-devtools/cmake/cmake/0001-CMakeDetermineSystem-use-oe-environment-vars-to-load.patch
index 8181510..9609f5f 100644
--- a/poky/meta/recipes-devtools/cmake/cmake/0001-CMakeDetermineSystem-use-oe-environment-vars-to-load.patch
+++ b/poky/meta/recipes-devtools/cmake/cmake/0001-CMakeDetermineSystem-use-oe-environment-vars-to-load.patch
@@ -1,4 +1,4 @@
-From 66d5b27dc37ef6243f6549e16d0285ba6c064a6e Mon Sep 17 00:00:00 2001
+From e75f76b00cc9c1cfc231c5e731e975552f5dd13e Mon Sep 17 00:00:00 2001
From: Cody P Schafer <dev@codyps.com>
Date: Thu, 27 Apr 2017 11:35:05 -0400
Subject: [PATCH] CMakeDetermineSystem: use oe environment vars to load default
@@ -25,7 +25,7 @@
1 file changed, 7 insertions(+)
diff --git a/Modules/CMakeDetermineSystem.cmake b/Modules/CMakeDetermineSystem.cmake
-index bae270d..5bb6bc0 100644
+index bae270de..5bb6bc0d 100644
--- a/Modules/CMakeDetermineSystem.cmake
+++ b/Modules/CMakeDetermineSystem.cmake
@@ -111,6 +111,13 @@ else()
diff --git a/poky/meta/recipes-devtools/cmake/cmake/0002-cmake-Prevent-the-detection-of-Qt5.patch b/poky/meta/recipes-devtools/cmake/cmake/0002-cmake-Prevent-the-detection-of-Qt5.patch
deleted file mode 100644
index 33db07c..0000000
--- a/poky/meta/recipes-devtools/cmake/cmake/0002-cmake-Prevent-the-detection-of-Qt5.patch
+++ /dev/null
@@ -1,122 +0,0 @@
-From 98abade8cc119e076e4c5f1461c5188f6d49c1d8 Mon Sep 17 00:00:00 2001
-From: Otavio Salvador <otavio@ossystems.com.br>
-Date: Wed, 17 Jan 2018 10:02:14 -0200
-Subject: [PATCH] cmake: Prevent the detection of Qt5
-
-Organization: O.S. Systems Software LTDA.
-
-CMake doesn't have dependency on qt4/qt5, so these tests usually fail
-but still can cause undeterministic results or build failures (when
-OE_QMAKE_PATH_EXTERNAL_HOST_BINS is undefined or native qmake removed
-while running the test in cmake)
-
-Upstream-Status: Inappropriate [configuration]
-
-Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
-
----
- Source/QtDialog/CMakeLists.txt | 2 +-
- Tests/CMakeLists.txt | 2 +-
- Tests/Qt4And5Automoc/CMakeLists.txt | 4 ++--
- Tests/QtAutogen/AutogenGuiTest.cmake | 3 +--
- Tests/QtAutogen/MacOsFW/CMakeLists.txt | 2 +-
- Tests/RunCMake/CMakeLists.txt | 2 +-
- Tests/RunCMake/IncompatibleQt/IncompatibleQt.cmake | 2 +-
- 7 files changed, 8 insertions(+), 9 deletions(-)
-
-diff --git a/Source/QtDialog/CMakeLists.txt b/Source/QtDialog/CMakeLists.txt
-index 452a303..d0a9fb4 100644
---- a/Source/QtDialog/CMakeLists.txt
-+++ b/Source/QtDialog/CMakeLists.txt
-@@ -3,7 +3,7 @@
-
- project(QtDialog)
- CMake_OPTIONAL_COMPONENT(cmake-gui)
--find_package(Qt5Widgets REQUIRED)
-+#find_package(Qt5Widgets REQUIRED)
-
- set(CMake_QT_EXTRA_LIBRARIES)
-
-diff --git a/Tests/CMakeLists.txt b/Tests/CMakeLists.txt
-index 1fb47cb..e022229 100644
---- a/Tests/CMakeLists.txt
-+++ b/Tests/CMakeLists.txt
-@@ -251,7 +251,7 @@ if(BUILD_TESTING)
- set(CMake_TEST_Qt5 1)
- endif()
- if(CMake_TEST_Qt5)
-- find_package(Qt5Widgets QUIET NO_MODULE)
-+ #find_package(Qt5Widgets QUIET NO_MODULE)
- endif()
-
- if(NOT CMake_TEST_EXTERNAL_CMAKE)
-diff --git a/Tests/Qt4And5Automoc/CMakeLists.txt b/Tests/Qt4And5Automoc/CMakeLists.txt
-index ad74961..a9dd74b 100644
---- a/Tests/Qt4And5Automoc/CMakeLists.txt
-+++ b/Tests/Qt4And5Automoc/CMakeLists.txt
-@@ -3,11 +3,11 @@ cmake_minimum_required(VERSION 2.8.12)
- project(Qt4And5Automoc)
-
- if (QT_REVERSE_FIND_ORDER)
-- find_package(Qt5Core REQUIRED)
-+ #find_package(Qt5Core REQUIRED)
- find_package(Qt4 REQUIRED)
- else()
- find_package(Qt4 REQUIRED)
-- find_package(Qt5Core REQUIRED)
-+ #find_package(Qt5Core REQUIRED)
- endif()
-
- set(CMAKE_AUTOMOC ON)
-diff --git a/Tests/QtAutogen/AutogenGuiTest.cmake b/Tests/QtAutogen/AutogenGuiTest.cmake
-index b76d341..a6e0acb 100644
---- a/Tests/QtAutogen/AutogenGuiTest.cmake
-+++ b/Tests/QtAutogen/AutogenGuiTest.cmake
-@@ -22,8 +22,7 @@ if (QT_TEST_VERSION EQUAL 4)
- endmacro()
-
- elseif(QT_TEST_VERSION EQUAL 5)
--
-- find_package(Qt5Widgets REQUIRED)
-+ #find_package(Qt5Widgets REQUIRED)
-
- set(QT_QTCORE_TARGET Qt5::Core)
- set(QT_LIBRARIES Qt5::Widgets)
-diff --git a/Tests/QtAutogen/MacOsFW/CMakeLists.txt b/Tests/QtAutogen/MacOsFW/CMakeLists.txt
-index c08efc4..87e25d9 100644
---- a/Tests/QtAutogen/MacOsFW/CMakeLists.txt
-+++ b/Tests/QtAutogen/MacOsFW/CMakeLists.txt
-@@ -2,7 +2,7 @@ cmake_minimum_required(VERSION 3.10)
- project(MacOsFW)
- include("../AutogenGuiTest.cmake")
-
--find_package(Qt5Test REQUIRED)
-+#find_package(Qt5Test REQUIRED)
-
- set(CMAKE_CXX_STANDARD 11)
- set(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/output/bin)
-diff --git a/Tests/RunCMake/CMakeLists.txt b/Tests/RunCMake/CMakeLists.txt
-index 370dd76..6bacbff 100644
---- a/Tests/RunCMake/CMakeLists.txt
-+++ b/Tests/RunCMake/CMakeLists.txt
-@@ -473,7 +473,7 @@ if(NOT WIN32)
- endif ()
-
- find_package(Qt4 QUIET)
--find_package(Qt5Core QUIET)
-+#find_package(Qt5Core QUIET)
- if (QT4_FOUND AND Qt5Core_FOUND AND NOT Qt5Core_VERSION VERSION_LESS 5.1.0)
- add_RunCMake_test(IncompatibleQt)
- endif()
-diff --git a/Tests/RunCMake/IncompatibleQt/IncompatibleQt.cmake b/Tests/RunCMake/IncompatibleQt/IncompatibleQt.cmake
-index 4fccdc4..b76e1e5 100644
---- a/Tests/RunCMake/IncompatibleQt/IncompatibleQt.cmake
-+++ b/Tests/RunCMake/IncompatibleQt/IncompatibleQt.cmake
-@@ -1,6 +1,6 @@
-
- find_package(Qt4 REQUIRED)
--find_package(Qt5Core REQUIRED)
-+#find_package(Qt5Core REQUIRED)
-
- add_executable(mainexe main.cpp)
- target_link_libraries(mainexe Qt4::QtCore Qt5::Core)
diff --git a/poky/meta/recipes-devtools/cmake/cmake_3.19.5.bb b/poky/meta/recipes-devtools/cmake/cmake_3.20.2.bb
similarity index 100%
rename from poky/meta/recipes-devtools/cmake/cmake_3.19.5.bb
rename to poky/meta/recipes-devtools/cmake/cmake_3.20.2.bb
diff --git a/poky/meta/recipes-devtools/createrepo-c/createrepo-c/0001-Do-not-set-PYTHON_INSTALL_DIR-by-running-python.patch b/poky/meta/recipes-devtools/createrepo-c/createrepo-c/0001-Do-not-set-PYTHON_INSTALL_DIR-by-running-python.patch
index d675af4..4b84457 100644
--- a/poky/meta/recipes-devtools/createrepo-c/createrepo-c/0001-Do-not-set-PYTHON_INSTALL_DIR-by-running-python.patch
+++ b/poky/meta/recipes-devtools/createrepo-c/createrepo-c/0001-Do-not-set-PYTHON_INSTALL_DIR-by-running-python.patch
@@ -1,4 +1,4 @@
-From 218a4760945be7a404df6515ffbc769c92791f9b Mon Sep 17 00:00:00 2001
+From 6f8f6d151b831b60f6e7892aa9294a6361353c72 Mon Sep 17 00:00:00 2001
From: Alexander Kanavin <alex.kanavin@gmail.com>
Date: Fri, 30 Dec 2016 18:31:02 +0200
Subject: [PATCH] Do not set PYTHON_INSTALL_DIR by running python
@@ -11,11 +11,11 @@
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/src/python/CMakeLists.txt b/src/python/CMakeLists.txt
-index 855127f..dff1d97 100644
+index ecc262d..a86514c 100644
--- a/src/python/CMakeLists.txt
+++ b/src/python/CMakeLists.txt
@@ -14,7 +14,7 @@ if (NOT SKBUILD)
- FIND_PACKAGE(PythonInterp 3 EXACT REQUIRED)
+ FIND_PACKAGE(PythonLibs 3 REQUIRED)
endif (NOT SKBUILD)
-EXECUTE_PROCESS(COMMAND ${PYTHON_EXECUTABLE} -c "from sys import stdout; from distutils import sysconfig; stdout.write(sysconfig.get_python_lib(True))" OUTPUT_VARIABLE PYTHON_INSTALL_DIR)
diff --git a/poky/meta/recipes-devtools/createrepo-c/createrepo-c_0.17.0.bb b/poky/meta/recipes-devtools/createrepo-c/createrepo-c_0.17.2.bb
similarity index 96%
rename from poky/meta/recipes-devtools/createrepo-c/createrepo-c_0.17.0.bb
rename to poky/meta/recipes-devtools/createrepo-c/createrepo-c_0.17.2.bb
index e043380..76bdd69 100644
--- a/poky/meta/recipes-devtools/createrepo-c/createrepo-c_0.17.0.bb
+++ b/poky/meta/recipes-devtools/createrepo-c/createrepo-c_0.17.2.bb
@@ -8,7 +8,7 @@
file://0001-Do-not-set-PYTHON_INSTALL_DIR-by-running-python.patch \
"
-SRCREV = "909a0636665ed96f97babc3b887f9badc88875c3"
+SRCREV = "8eff6ed99f5fd0ba844cb8513963435caab5fd3c"
S = "${WORKDIR}/git"
diff --git a/poky/meta/recipes-devtools/dejagnu/dejagnu_1.6.2.bb b/poky/meta/recipes-devtools/dejagnu/dejagnu_1.6.2.bb
index 0a007bb..ce242c3 100644
--- a/poky/meta/recipes-devtools/dejagnu/dejagnu_1.6.2.bb
+++ b/poky/meta/recipes-devtools/dejagnu/dejagnu_1.6.2.bb
@@ -7,6 +7,7 @@
SECTION = "devel"
DEPENDS += "expect-native"
+RDEPENDS_${PN} = "expect"
inherit autotools
diff --git a/poky/meta/recipes-devtools/distcc/distcc_3.3.5.bb b/poky/meta/recipes-devtools/distcc/distcc_3.4.bb
similarity index 97%
rename from poky/meta/recipes-devtools/distcc/distcc_3.3.5.bb
rename to poky/meta/recipes-devtools/distcc/distcc_3.4.bb
index 5c26441..3bab6d5 100644
--- a/poky/meta/recipes-devtools/distcc/distcc_3.3.5.bb
+++ b/poky/meta/recipes-devtools/distcc/distcc_3.4.bb
@@ -20,7 +20,7 @@
file://distcc \
file://distcc.service \
"
-SRCREV = "8572e2a1af39e69b2a2d74622fed6d2dd7dca9b7"
+SRCREV = "50d821efe99cae82c05be0a4ab3b4035ef0d3883"
S = "${WORKDIR}/git"
UPSTREAM_CHECK_GITTAGREGEX = "v(?P<pver>\d+(\.\d+)+)"
diff --git a/poky/meta/recipes-devtools/dnf/dnf/0001-dnf-rpm-miscutils.py-fix-usage-of-_.patch b/poky/meta/recipes-devtools/dnf/dnf/0001-dnf-rpm-miscutils.py-fix-usage-of-_.patch
new file mode 100644
index 0000000..99afe09
--- /dev/null
+++ b/poky/meta/recipes-devtools/dnf/dnf/0001-dnf-rpm-miscutils.py-fix-usage-of-_.patch
@@ -0,0 +1,39 @@
+From 2729c00f0060beab8537a9bebc796b170949093d Mon Sep 17 00:00:00 2001
+From: Alexander Kanavin <alex.kanavin@gmail.com>
+Date: Tue, 4 May 2021 22:03:30 +0200
+Subject: [PATCH 1/2] dnf/rpm/miscutils.py: fix usage of _()
+
+Specifically:
+- an import of _ was missing
+- _ was reused for a different purpose
+
+Upstream-Status: Submitted [https://github.com/rpm-software-management/dnf/pull/1762]
+Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
+---
+ dnf/rpm/miscutils.py | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/dnf/rpm/miscutils.py b/dnf/rpm/miscutils.py
+index 235aaf28f..7e33d4c42 100644
+--- a/dnf/rpm/miscutils.py
++++ b/dnf/rpm/miscutils.py
+@@ -22,6 +22,7 @@ import subprocess
+ import logging
+
+ from dnf.i18n import ucd
++from dnf.i18n import _
+ from shutil import which
+
+
+@@ -46,7 +47,7 @@ def _verifyPkgUsingRpmkeys(package, installroot):
+ env={'LC_ALL': 'C'},
+ stdout=subprocess.PIPE,
+ cwd='/') as p:
+- data, _ = p.communicate()
++ data, err = p.communicate()
+ if p.returncode != 0 or data != (package.encode('ascii', 'strict') + b': digests signatures OK\n'):
+ return 0
+ else:
+--
+2.31.1
+
diff --git a/poky/meta/recipes-devtools/dnf/dnf/0002-dnf-rpm-miscutils.py-do-not-hardcode-usr-bin-rpmkeys.patch b/poky/meta/recipes-devtools/dnf/dnf/0002-dnf-rpm-miscutils.py-do-not-hardcode-usr-bin-rpmkeys.patch
new file mode 100644
index 0000000..b4c9e07
--- /dev/null
+++ b/poky/meta/recipes-devtools/dnf/dnf/0002-dnf-rpm-miscutils.py-do-not-hardcode-usr-bin-rpmkeys.patch
@@ -0,0 +1,37 @@
+From dc14022a99dc017c52c484efb32729729baf854c Mon Sep 17 00:00:00 2001
+From: Alexander Kanavin <alex.kanavin@gmail.com>
+Date: Tue, 4 May 2021 22:07:32 +0200
+Subject: [PATCH 2/2] dnf/rpm/miscutils.py: do not hardcode /usr/bin/rpmkeys
+
+Some build systems (e.g. Yocto) place a specially configured
+rpmkeys executable elsewhere and set up PATH accordingly;
+it's better to always take it from there.
+
+Upstream-Status: Submitted [https://github.com/rpm-software-management/dnf/pull/1763]
+Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
+---
+ dnf/rpm/miscutils.py | 8 +++-----
+ 1 file changed, 3 insertions(+), 5 deletions(-)
+
+diff --git a/dnf/rpm/miscutils.py b/dnf/rpm/miscutils.py
+index 7e33d4c42..fcd956db9 100644
+--- a/dnf/rpm/miscutils.py
++++ b/dnf/rpm/miscutils.py
+@@ -30,11 +30,9 @@ logger = logging.getLogger('dnf')
+
+
+ def _verifyPkgUsingRpmkeys(package, installroot):
+- rpmkeys_binary = '/usr/bin/rpmkeys'
+- if not os.path.isfile(rpmkeys_binary):
+- rpmkeys_binary = which("rpmkeys")
+- logger.info(_('Using rpmkeys executable from {path} to verify signature for package: {package}.').format(
+- path=rpmkeys_binary, package=package))
++ rpmkeys_binary = which("rpmkeys")
++ logger.info(_('Using rpmkeys executable from {path} to verify signature for package: {package}.').format(
++ path=rpmkeys_binary, package=package))
+
+ if not os.path.isfile(rpmkeys_binary):
+ logger.critical(_('Cannot find rpmkeys executable to verify signatures.'))
+--
+2.31.1
+
diff --git a/poky/meta/recipes-devtools/dnf/dnf_4.6.0.bb b/poky/meta/recipes-devtools/dnf/dnf_4.7.0.bb
similarity index 94%
rename from poky/meta/recipes-devtools/dnf/dnf_4.6.0.bb
rename to poky/meta/recipes-devtools/dnf/dnf_4.7.0.bb
index 6651e64..7314eaf 100644
--- a/poky/meta/recipes-devtools/dnf/dnf_4.6.0.bb
+++ b/poky/meta/recipes-devtools/dnf/dnf_4.7.0.bb
@@ -16,9 +16,11 @@
file://0030-Run-python-scripts-using-env.patch \
file://0001-set-python-path-for-completion_helper.patch \
file://0001-dnf-write-the-log-lock-to-root.patch \
+ file://0001-dnf-rpm-miscutils.py-fix-usage-of-_.patch \
+ file://0002-dnf-rpm-miscutils.py-do-not-hardcode-usr-bin-rpmkeys.patch \
"
-SRCREV = "c826d7db401ebf9b59b2fa74570a919e4af2673e"
+SRCREV = "395541fbf8f87f81cdca7567f22be1182e55bea7"
UPSTREAM_CHECK_GITTAGREGEX = "(?P<pver>\d+(\.\d+)+)"
S = "${WORKDIR}/git"
diff --git a/poky/meta/recipes-devtools/dpkg/dpkg_1.20.7.1.bb b/poky/meta/recipes-devtools/dpkg/dpkg_1.20.9.bb
similarity index 93%
rename from poky/meta/recipes-devtools/dpkg/dpkg_1.20.7.1.bb
rename to poky/meta/recipes-devtools/dpkg/dpkg_1.20.9.bb
index 55ac84f..60ae3ff 100644
--- a/poky/meta/recipes-devtools/dpkg/dpkg_1.20.7.1.bb
+++ b/poky/meta/recipes-devtools/dpkg/dpkg_1.20.9.bb
@@ -1,7 +1,7 @@
require dpkg.inc
LIC_FILES_CHKSUM = "file://COPYING;md5=751419260aa954499f7abaabaa882bbe"
-SRC_URI = "git://salsa.debian.org/dpkg-team/dpkg.git;protocol=https;branch=sid \
+SRC_URI = "git://salsa.debian.org/dpkg-team/dpkg.git;protocol=https;branch=1.20.x \
file://noman.patch \
file://remove-tar-no-timestamp.patch \
file://arch_pm.patch \
@@ -19,6 +19,6 @@
SRC_URI_append_class-native = " file://0001-build.c-ignore-return-of-1-from-tar-cf.patch"
-SRCREV = "667bf0aeb92e0e7bb225ee273569c5e2389083bd"
+SRCREV = "2177b782b16e77e97c9643961a5ae3c639bcc4a3"
S = "${WORKDIR}/git"
diff --git a/poky/meta/recipes-devtools/e2fsprogs/e2fsprogs/0001-lib-ext2fs-unix_io.c-do-unlock-on-error.patch b/poky/meta/recipes-devtools/e2fsprogs/e2fsprogs/0001-lib-ext2fs-unix_io.c-do-unlock-on-error.patch
new file mode 100644
index 0000000..26f972b
--- /dev/null
+++ b/poky/meta/recipes-devtools/e2fsprogs/e2fsprogs/0001-lib-ext2fs-unix_io.c-do-unlock-on-error.patch
@@ -0,0 +1,24 @@
+From 42ba67f9a51ef959e7fd8dac29b5398c121c6976 Mon Sep 17 00:00:00 2001
+From: Alexander Kanavin <alex.kanavin@gmail.com>
+Date: Fri, 30 Apr 2021 23:45:56 +0200
+Subject: [PATCH] lib/ext2fs/unix_io.c: do unlock on error
+
+Upstream-Status: Submitted [https://github.com/tytso/e2fsprogs/pull/68]
+Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
+---
+ lib/ext2fs/unix_io.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/lib/ext2fs/unix_io.c b/lib/ext2fs/unix_io.c
+index 64eee342..528c2fbc 100644
+--- a/lib/ext2fs/unix_io.c
++++ b/lib/ext2fs/unix_io.c
+@@ -398,7 +398,7 @@ static errcode_t raw_write_blk(io_channel channel,
+ mutex_lock(data, BOUNCE_MTX);
+ if (ext2fs_llseek(data->dev, location, SEEK_SET) < 0) {
+ retval = errno ? errno : EXT2_ET_LLSEEK_FAILED;
+- goto error_out;
++ goto error_unlock;
+ }
+ actual = write(data->dev, buf, size);
+ mutex_unlock(data, BOUNCE_MTX);
diff --git a/poky/meta/recipes-devtools/e2fsprogs/e2fsprogs/0001-lib-ext2fs-unix_io.c-revert-parts-of-libext2fs-fix-p.patch b/poky/meta/recipes-devtools/e2fsprogs/e2fsprogs/0001-lib-ext2fs-unix_io.c-revert-parts-of-libext2fs-fix-p.patch
new file mode 100644
index 0000000..2452f7e
--- /dev/null
+++ b/poky/meta/recipes-devtools/e2fsprogs/e2fsprogs/0001-lib-ext2fs-unix_io.c-revert-parts-of-libext2fs-fix-p.patch
@@ -0,0 +1,48 @@
+From 3593063f735f453d43f461292e26913436c11ca3 Mon Sep 17 00:00:00 2001
+From: Alexander Kanavin <alex.kanavin@gmail.com>
+Date: Sat, 1 May 2021 13:06:12 +0200
+Subject: [PATCH] lib/ext2fs/unix_io.c: revert parts of "libext2fs: fix
+ potential races in unix_io"
+
+Upstream-Status: Submitted [https://github.com/tytso/e2fsprogs/pull/68]
+Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
+---
+ lib/ext2fs/unix_io.c | 15 ++++++++-------
+ 1 file changed, 8 insertions(+), 7 deletions(-)
+
+diff --git a/lib/ext2fs/unix_io.c b/lib/ext2fs/unix_io.c
+index 528c2fbc..f4916b21 100644
+--- a/lib/ext2fs/unix_io.c
++++ b/lib/ext2fs/unix_io.c
+@@ -311,10 +311,10 @@ bounce_read:
+ size += really_read;
+ goto short_read;
+ }
+- actual = size;
+- if (actual > align_size)
+- actual = align_size;
+- actual -= offset;
++ if ((actual + offset) > align_size)
++ actual = align_size - offset;
++ if (actual > size)
++ actual = size;
+ memcpy(buf, data->bounce + offset, actual);
+
+ really_read += actual;
+@@ -455,9 +455,10 @@ bounce_write:
+ }
+ }
+ actual = size;
+- if (actual > align_size)
+- actual = align_size;
+- actual -= offset;
++ if ((actual + offset) > align_size)
++ actual = align_size - offset;
++ if (actual > size)
++ actual = size;
+ memcpy(((char *)data->bounce) + offset, buf, actual);
+ if (ext2fs_llseek(data->dev, aligned_blk * align_size, SEEK_SET) < 0) {
+ retval = errno ? errno : EXT2_ET_LLSEEK_FAILED;
+--
+2.24.0
+
diff --git a/poky/meta/recipes-devtools/e2fsprogs/e2fsprogs/e2fsprogs-fix-missing-check-for-permission-denied.patch b/poky/meta/recipes-devtools/e2fsprogs/e2fsprogs/e2fsprogs-fix-missing-check-for-permission-denied.patch
index d7c07c3..e8b2aaf 100644
--- a/poky/meta/recipes-devtools/e2fsprogs/e2fsprogs/e2fsprogs-fix-missing-check-for-permission-denied.patch
+++ b/poky/meta/recipes-devtools/e2fsprogs/e2fsprogs/e2fsprogs-fix-missing-check-for-permission-denied.patch
@@ -1,4 +1,4 @@
-From 9263b8764702f2b26ddaaf80808ebab31a1dba3b Mon Sep 17 00:00:00 2001
+From 8957443bcbea43685c76eb3cbc5009f7fd529283 Mon Sep 17 00:00:00 2001
From: Jackie Huang <jackie.huang@windriver.com>
Date: Wed, 10 Aug 2016 11:19:44 +0800
Subject: [PATCH] Fix missing check for permission denied.
diff --git a/poky/meta/recipes-devtools/e2fsprogs/e2fsprogs/quiet-debugfs.patch b/poky/meta/recipes-devtools/e2fsprogs/e2fsprogs/quiet-debugfs.patch
index 88d0ae7..96eb7f2 100644
--- a/poky/meta/recipes-devtools/e2fsprogs/e2fsprogs/quiet-debugfs.patch
+++ b/poky/meta/recipes-devtools/e2fsprogs/e2fsprogs/quiet-debugfs.patch
@@ -1,4 +1,4 @@
-From 6e4c1644a3a8cacf7c1f5953cc378589bb046d5a Mon Sep 17 00:00:00 2001
+From 3b75308cc75adc249db6ca36e42fe93309b9a018 Mon Sep 17 00:00:00 2001
From: Ross Burton <ross.burton@intel.com>
Date: Mon, 23 Dec 2013 13:38:34 +0000
Subject: [PATCH] e2fsprogs: silence debugfs
@@ -14,10 +14,10 @@
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/debugfs/debugfs.c b/debugfs/debugfs.c
-index 132c5f9d..98063727 100644
+index b67a88bc..76dd5556 100644
--- a/debugfs/debugfs.c
+++ b/debugfs/debugfs.c
-@@ -2510,7 +2510,7 @@ static int source_file(const char *cmd_file, int ss_idx)
+@@ -2518,7 +2518,7 @@ static int source_file(const char *cmd_file, int ss_idx)
cp = strchr(buf, '\r');
if (cp)
*cp = 0;
diff --git a/poky/meta/recipes-devtools/e2fsprogs/e2fsprogs_1.46.1.bb b/poky/meta/recipes-devtools/e2fsprogs/e2fsprogs_1.46.2.bb
similarity index 95%
rename from poky/meta/recipes-devtools/e2fsprogs/e2fsprogs_1.46.1.bb
rename to poky/meta/recipes-devtools/e2fsprogs/e2fsprogs_1.46.2.bb
index be8b67c..fc022f3 100644
--- a/poky/meta/recipes-devtools/e2fsprogs/e2fsprogs_1.46.1.bb
+++ b/poky/meta/recipes-devtools/e2fsprogs/e2fsprogs_1.46.2.bb
@@ -4,6 +4,8 @@
file://run-ptest \
file://ptest.patch \
file://mkdir_p.patch \
+ file://0001-lib-ext2fs-unix_io.c-do-unlock-on-error.patch \
+ file://0001-lib-ext2fs-unix_io.c-revert-parts-of-libext2fs-fix-p.patch \
"
SRC_URI_append_class-native = " file://e2fsprogs-fix-missing-check-for-permission-denied.patch \
@@ -11,7 +13,7 @@
"
-SRCREV = "3114c623f56b0d61f5f34b85f7b23d28f6c848c0"
+SRCREV = "1eea0e2bd9a6760ebad834d5d2cf700fffe5ebe2"
UPSTREAM_CHECK_GITTAGREGEX = "v(?P<pver>\d+\.\d+(\.\d+)*)$"
EXTRA_OECONF += "--libdir=${base_libdir} --sbindir=${base_sbindir} \
diff --git a/poky/meta/recipes-devtools/erofs-utils/erofs-utils_1.2.1.bb b/poky/meta/recipes-devtools/erofs-utils/erofs-utils_1.2.1.bb
new file mode 100644
index 0000000..6435fea
--- /dev/null
+++ b/poky/meta/recipes-devtools/erofs-utils/erofs-utils_1.2.1.bb
@@ -0,0 +1,21 @@
+SUMMARY = "Tools for erofs filesystems"
+LICENSE = "GPLv2+"
+SECTION = "base"
+LIC_FILES_CHKSUM = "file://COPYING;md5=94fa01670a2a8f2d3ab2de15004e0848"
+HOMEPAGE = "https://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs-utils.git/tree/README"
+
+SRCREV = "d1f4953edfcf4f51c71ba91586e21fc6ce9f6db9"
+SRC_URI = "git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs-utils.git"
+
+S = "${WORKDIR}/git"
+
+DEPENDS = "util-linux-libuuid"
+
+inherit pkgconfig autotools
+
+PACKAGECONFIG ??= "lz4"
+PACKAGECONFIG[lz4] = "--enable-lz4,--disable-lz4,lz4"
+
+EXTRA_OECONF = "${PACKAGECONFIG_CONFARGS} --disable-fuse"
+
+BBCLASSEXTEND = "native nativesdk"
diff --git a/poky/meta/recipes-devtools/flex/flex_2.6.4.bb b/poky/meta/recipes-devtools/flex/flex_2.6.4.bb
index 1d43d22..54e7e01 100644
--- a/poky/meta/recipes-devtools/flex/flex_2.6.4.bb
+++ b/poky/meta/recipes-devtools/flex/flex_2.6.4.bb
@@ -3,12 +3,14 @@
lexical patterns in text."
HOMEPAGE = "http://sourceforge.net/projects/flex/"
SECTION = "devel"
-LICENSE = "BSD-2-Clause"
+LICENSE = "BSD-3-Clause & LGPL-2.0+"
+LICENSE_${PN}-libfl = "BSD-3-Clause"
DEPENDS = "${@bb.utils.contains('PTEST_ENABLED', '1', 'bison-native flex-native', '', d)}"
BBCLASSEXTEND = "native nativesdk"
-LIC_FILES_CHKSUM = "file://COPYING;md5=e4742cf92e89040b39486a6219b68067"
+LIC_FILES_CHKSUM = "file://COPYING;md5=e4742cf92e89040b39486a6219b68067 \
+ file://src/gettext.h;beginline=1;endline=17;md5=9c05dda2f58d89b850c399cf22e1a00c"
SRC_URI = "https://github.com/westes/flex/releases/download/v${PV}/flex-${PV}.tar.gz \
file://run-ptest \
diff --git a/poky/meta/recipes-devtools/gcc/gcc-11.1.inc b/poky/meta/recipes-devtools/gcc/gcc-11.1.inc
index 7130022..bf29879 100644
--- a/poky/meta/recipes-devtools/gcc/gcc-11.1.inc
+++ b/poky/meta/recipes-devtools/gcc/gcc-11.1.inc
@@ -6,7 +6,7 @@
# BINV should be incremented to a revision after a minor gcc release
-BINV = "11.1.0"
+BINV = "11.1.1"
FILESEXTRAPATHS =. "${FILE_DIRNAME}/gcc:${FILE_DIRNAME}/gcc/backport:"
@@ -25,7 +25,10 @@
#RELEASE ?= "5b2ac9b40c325e9209c0bd55955db84aad4a0cc5"
#BASEURI ?= "https://github.com/gcc-mirror/gcc/archive/${RELEASE}.zip;downloadfilename=gcc-${PV}-${RELEASE}.zip"
-BASEURI ?= "${GNU_MIRROR}/gcc/gcc-${PV}/gcc-${PV}.tar.xz"
+
+BASEURI ?= "${GNU_MIRROR}/gcc/gcc-${PV}/gcc-${PV}.tar.xz \
+ http://downloads.yoctoproject.org/mirror/sources/gcc-11.1.0-9ee61d2b51df012c659359873637cc2162ecccf3.patch;apply=yes;name=backports \
+ "
SRC_URI = "\
${BASEURI} \
file://0001-gcc-4.3.1-ARCH_FLAGS_FOR_TARGET.patch \
@@ -65,8 +68,10 @@
file://0035-gentypes-genmodes-Do-not-use-__LINE__-for-maintainin.patch \
file://0036-mingw32-Enable-operation_not_supported.patch \
file://0037-libatomic-Do-not-enforce-march-on-aarch64.patch \
+ file://0001-Revert-libstdc-Install-libstdc-gdb.py-more-robustly-.patch \
"
SRC_URI[sha256sum] = "4c4a6fb8a8396059241c2e674b85b351c26a5d678274007f076957afa1cc9ddf"
+SRC_URI[backports.sha256sum] = "69274bebd6c069a13443d4af61070e854740a639ec4d66eedf3e80070363587b"
S = "${TMPDIR}/work-shared/gcc-${PV}-${PR}/gcc-${PV}"
diff --git a/poky/meta/recipes-devtools/gcc/gcc-cross-canadian.inc b/poky/meta/recipes-devtools/gcc/gcc-cross-canadian.inc
index 878feaf..1872fae 100644
--- a/poky/meta/recipes-devtools/gcc/gcc-cross-canadian.inc
+++ b/poky/meta/recipes-devtools/gcc/gcc-cross-canadian.inc
@@ -124,7 +124,7 @@
dest=${D}${libexecdir}/gcc/${TARGET_SYS}/${BINV}/
install -d $dest
suffix=${EXEEXT}
- for t in ar as ld nm objcopy objdump ranlib strip g77 gcc cpp gfortran; do
+ for t in ar as ld ld.bfd ld.gold nm objcopy objdump ranlib strip g77 gcc cpp gfortran; do
if [ "$t" = "g77" -o "$t" = "gfortran" ] && [ ! -e ${D}${bindir}/${TARGET_PREFIX}$t$suffix ]; then
continue
fi
diff --git a/poky/meta/recipes-devtools/gcc/gcc-sanitizers.inc b/poky/meta/recipes-devtools/gcc/gcc-sanitizers.inc
index d0348c4..59e91da 100644
--- a/poky/meta/recipes-devtools/gcc/gcc-sanitizers.inc
+++ b/poky/meta/recipes-devtools/gcc/gcc-sanitizers.inc
@@ -90,7 +90,9 @@
${libdir}/libhwasan.so \
${libdir}/libasan.la \
"
-FILES_libasan-staticdev += "${libdir}/libasan.a"
+FILES_libasan-staticdev += "${libdir}/libasan.a \
+ ${libdir}/libhwasan.a \
+"
FILES_libubsan += "${libdir}/libubsan.so.*"
FILES_libubsan-dev += "\
diff --git a/poky/meta/recipes-devtools/gcc/gcc/0001-Revert-libstdc-Install-libstdc-gdb.py-more-robustly-.patch b/poky/meta/recipes-devtools/gcc/gcc/0001-Revert-libstdc-Install-libstdc-gdb.py-more-robustly-.patch
new file mode 100644
index 0000000..a3e31e4
--- /dev/null
+++ b/poky/meta/recipes-devtools/gcc/gcc/0001-Revert-libstdc-Install-libstdc-gdb.py-more-robustly-.patch
@@ -0,0 +1,76 @@
+This change breaks installation on baremetal targets, so whilst the cause is
+investigated revert the commit.
+
+Upstream-Status: Inappropriate
+Signed-off-by: Ross Burton <ross.burton@arm.com>
+
+From 8ec52bd0ba2141ef0bcc6f93e26a23d662b40f78 Mon Sep 17 00:00:00 2001
+From: Ross Burton <ross.burton@arm.com>
+Date: Wed, 26 May 2021 19:54:29 +0100
+Subject: [PATCH] Revert "libstdc++: Install libstdc++*-gdb.py more robustly
+ [PR 99453]"
+
+This reverts commit dbb87d6a9c37c8eca80d77782717a8144515c16d.
+---
+ libstdc++-v3/python/Makefile.am | 20 ++++++++++++++++----
+ libstdc++-v3/python/Makefile.in | 14 ++++++++++++--
+ 2 files changed, 28 insertions(+), 6 deletions(-)
+
+diff --git a/libstdc++-v3/python/Makefile.am b/libstdc++-v3/python/Makefile.am
+index 0c2b207b86e..01517a2a522 100644
+--- a/libstdc++-v3/python/Makefile.am
++++ b/libstdc++-v3/python/Makefile.am
+@@ -44,9 +44,21 @@ gdb.py: hook.in Makefile
+ install-data-local: gdb.py
+ @$(mkdir_p) $(DESTDIR)$(toolexeclibdir)
+ ## We want to install gdb.py as SOMETHING-gdb.py. SOMETHING is the
+-## full name of the final library. We use the libtool .la file to get
+-## the correct name.
+- @libname=`sed -ne "/^library_names=/{s/.*='//;s/'$$//;s/ .*//;p;}" \
+- $(DESTDIR)$(toolexeclibdir)/libstdc++.la`; \
++## full name of the final library. We want to ignore symlinks, the
++## .la file, and any previous -gdb.py file. This is inherently
++## fragile, but there does not seem to be a better option, because
++## libtool hides the real names from us.
++ @here=`pwd`; cd $(DESTDIR)$(toolexeclibdir); \
++ for file in libstdc++.*; do \
++ case $$file in \
++ *-gdb.py) ;; \
++ *.la) ;; \
++ *) if test -h $$file; then \
++ continue; \
++ fi; \
++ libname=$$file;; \
++ esac; \
++ done; \
++ cd $$here; \
+ echo " $(INSTALL_DATA) gdb.py $(DESTDIR)$(toolexeclibdir)/$$libname-gdb.py"; \
+ $(INSTALL_DATA) gdb.py $(DESTDIR)$(toolexeclibdir)/$$libname-gdb.py
+diff --git a/libstdc++-v3/python/Makefile.in b/libstdc++-v3/python/Makefile.in
+index 2efe0b96a19..c35dbe55961 100644
+--- a/libstdc++-v3/python/Makefile.in
++++ b/libstdc++-v3/python/Makefile.in
+@@ -607,8 +607,18 @@ gdb.py: hook.in Makefile
+
+ install-data-local: gdb.py
+ @$(mkdir_p) $(DESTDIR)$(toolexeclibdir)
+- @libname=`sed -ne "/^library_names=/{s/.*='//;s/'$$//;s/ .*//;p;}" \
+- $(DESTDIR)$(toolexeclibdir)/libstdc++.la`; \
++ @here=`pwd`; cd $(DESTDIR)$(toolexeclibdir); \
++ for file in libstdc++.*; do \
++ case $$file in \
++ *-gdb.py) ;; \
++ *.la) ;; \
++ *) if test -h $$file; then \
++ continue; \
++ fi; \
++ libname=$$file;; \
++ esac; \
++ done; \
++ cd $$here; \
+ echo " $(INSTALL_DATA) gdb.py $(DESTDIR)$(toolexeclibdir)/$$libname-gdb.py"; \
+ $(INSTALL_DATA) gdb.py $(DESTDIR)$(toolexeclibdir)/$$libname-gdb.py
+
+--
+2.25.1
+
diff --git a/poky/meta/recipes-devtools/gcc/gcc/0019-Ensure-target-gcc-headers-can-be-included.patch b/poky/meta/recipes-devtools/gcc/gcc/0019-Ensure-target-gcc-headers-can-be-included.patch
index 98472dd..120d5a2 100644
--- a/poky/meta/recipes-devtools/gcc/gcc/0019-Ensure-target-gcc-headers-can-be-included.patch
+++ b/poky/meta/recipes-devtools/gcc/gcc/0019-Ensure-target-gcc-headers-can-be-included.patch
@@ -1,4 +1,4 @@
-From 9b4eb0e18a953d79d20c78d3ba741af6d71ab9ca Mon Sep 17 00:00:00 2001
+From 6f410ed8fb7eee11ba7a25634c2257666b98ef52 Mon Sep 17 00:00:00 2001
From: Khem Raj <raj.khem@gmail.com>
Date: Fri, 20 Feb 2015 10:25:11 +0000
Subject: [PATCH] Ensure target gcc headers can be included
@@ -11,14 +11,18 @@
picking up these headers under the sysroot supplied on the gcc
command line in order to resolve this.
+Extend target gcc headers search to musl too
+
Upstream-Status: Pending
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
---
- gcc/Makefile.in | 2 ++
- gcc/cppdefault.c | 4 ++++
- 2 files changed, 6 insertions(+)
+ gcc/Makefile.in | 2 ++
+ gcc/config/linux.h | 8 ++++++++
+ gcc/config/rs6000/sysv4.h | 8 ++++++++
+ gcc/cppdefault.c | 4 ++++
+ 4 files changed, 22 insertions(+)
diff --git a/gcc/Makefile.in b/gcc/Makefile.in
index 59c45c81393..9b17d120aa1 100644
@@ -40,6 +44,58 @@
-DFIXED_INCLUDE_DIR=\"$(libsubdir)/include-fixed\" \
-DGPLUSPLUS_INCLUDE_DIR=\"$(gcc_gxx_include_dir)\" \
-DGPLUSPLUS_INCLUDE_DIR_ADD_SYSROOT=$(gcc_gxx_include_dir_add_sysroot) \
+diff --git a/gcc/config/linux.h b/gcc/config/linux.h
+index 87efc5f69fe..b525bcd56b3 100644
+--- a/gcc/config/linux.h
++++ b/gcc/config/linux.h
+@@ -165,6 +165,13 @@ see the files COPYING3 and COPYING.RUNTIME respectively. If not, see
+ #define INCLUDE_DEFAULTS_MUSL_TOOL
+ #endif
+
++#ifdef GCC_INCLUDE_SUBDIR_TARGET
++#define INCLUDE_DEFAULTS_MUSL_SUBDIR_TARGET \
++ { STANDARD_STARTFILE_PREFIX_2 GCC_INCLUDE_SUBDIR_TARGET, "GCC", 0, 0, 1, 0},
++#else
++#define INCLUDE_DEFAULTS_MUSL_SUBDIR_TARGET
++#endif
++
+ #ifdef NATIVE_SYSTEM_HEADER_DIR
+ #define INCLUDE_DEFAULTS_MUSL_NATIVE \
+ { NATIVE_SYSTEM_HEADER_DIR, 0, 0, 0, 1, 2 }, \
+@@ -191,6 +198,7 @@ see the files COPYING3 and COPYING.RUNTIME respectively. If not, see
+ INCLUDE_DEFAULTS_MUSL_PREFIX \
+ INCLUDE_DEFAULTS_MUSL_CROSS \
+ INCLUDE_DEFAULTS_MUSL_TOOL \
++ INCLUDE_DEFAULTS_MUSL_SUBDIR_TARGET \
+ INCLUDE_DEFAULTS_MUSL_NATIVE \
+ { GCC_INCLUDE_DIR, "GCC", 0, 1, 0, 0 }, \
+ { 0, 0, 0, 0, 0, 0 } \
+diff --git a/gcc/config/rs6000/sysv4.h b/gcc/config/rs6000/sysv4.h
+index 510abe169c5..0c2bba5ea32 100644
+--- a/gcc/config/rs6000/sysv4.h
++++ b/gcc/config/rs6000/sysv4.h
+@@ -995,6 +995,13 @@ ncrtn.o%s"
+ #define INCLUDE_DEFAULTS_MUSL_TOOL
+ #endif
+
++#ifdef GCC_INCLUDE_SUBDIR_TARGET
++#define INCLUDE_DEFAULTS_MUSL_SUBDIR_TARGET \
++ { STANDARD_STARTFILE_PREFIX_2 GCC_INCLUDE_SUBDIR_TARGET, "GCC", 0, 0, 1, 0},
++#else
++#define INCLUDE_DEFAULTS_MUSL_SUBDIR_TARGET
++#endif
++
+ #ifdef NATIVE_SYSTEM_HEADER_DIR
+ #define INCLUDE_DEFAULTS_MUSL_NATIVE \
+ { NATIVE_SYSTEM_HEADER_DIR, 0, 0, 0, 1, 2 }, \
+@@ -1021,6 +1028,7 @@ ncrtn.o%s"
+ INCLUDE_DEFAULTS_MUSL_PREFIX \
+ INCLUDE_DEFAULTS_MUSL_CROSS \
+ INCLUDE_DEFAULTS_MUSL_TOOL \
++ INCLUDE_DEFAULTS_MUSL_SUBDIR_TARGET \
+ INCLUDE_DEFAULTS_MUSL_NATIVE \
+ { GCC_INCLUDE_DIR, "GCC", 0, 1, 0, 0 }, \
+ { 0, 0, 0, 0, 0, 0 } \
diff --git a/gcc/cppdefault.c b/gcc/cppdefault.c
index c503d14fc3f..d54d6ce0076 100644
--- a/gcc/cppdefault.c
diff --git a/poky/meta/recipes-devtools/gcc/gcc/0024-handle-sysroot-support-for-nativesdk-gcc.patch b/poky/meta/recipes-devtools/gcc/gcc/0024-handle-sysroot-support-for-nativesdk-gcc.patch
index 3958e9c..b1054fa 100644
--- a/poky/meta/recipes-devtools/gcc/gcc/0024-handle-sysroot-support-for-nativesdk-gcc.patch
+++ b/poky/meta/recipes-devtools/gcc/gcc/0024-handle-sysroot-support-for-nativesdk-gcc.patch
@@ -1,4 +1,4 @@
-From 35c084a051bcd6587ebc73e4acb045cb2bdf7e99 Mon Sep 17 00:00:00 2001
+From 354682ad8f71f62643dcd83f64b51b5979615a0c Mon Sep 17 00:00:00 2001
From: Khem Raj <raj.khem@gmail.com>
Date: Mon, 7 Dec 2015 23:39:54 +0000
Subject: [PATCH] handle sysroot support for nativesdk-gcc
@@ -23,6 +23,9 @@
Upstream-Status: Inappropriate
RP 2015/7/28
+Extend the gccrelocprefix support to musl config too, this ensures
+that gcc will get right bits in SDK installations
+
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Added PREFIXVAR and EXEC_PREFIXVAR to support runtime relocation. Without
@@ -32,16 +35,18 @@
Signed-off-by: Mark Hatle <mark.hatle@kernel.crashing.org>
---
- gcc/c-family/c-opts.c | 4 +--
- gcc/cppdefault.c | 63 ++++++++++++++++++++++++++-----------------
- gcc/cppdefault.h | 13 ++++-----
- gcc/gcc.c | 20 +++++++++-----
- gcc/incpath.c | 12 ++++-----
- gcc/prefix.c | 6 +++--
- 6 files changed, 70 insertions(+), 48 deletions(-)
+ gcc/c-family/c-opts.c | 4 +--
+ gcc/config/linux.h | 24 +++++++--------
+ gcc/config/rs6000/sysv4.h | 24 +++++++--------
+ gcc/cppdefault.c | 63 ++++++++++++++++++++++++---------------
+ gcc/cppdefault.h | 13 ++++----
+ gcc/gcc.c | 20 +++++++++----
+ gcc/incpath.c | 12 ++++----
+ gcc/prefix.c | 6 ++--
+ 8 files changed, 94 insertions(+), 72 deletions(-)
diff --git a/gcc/c-family/c-opts.c b/gcc/c-family/c-opts.c
-index bd15b9cd902..2bd667e3f58 100644
+index 89e05a4c551..5577383665d 100644
--- a/gcc/c-family/c-opts.c
+++ b/gcc/c-family/c-opts.c
@@ -1436,8 +1436,8 @@ add_prefixed_path (const char *suffix, incpath_kind chain)
@@ -55,6 +60,162 @@
path = (char *) xmalloc (prefix_len + suffix_len + 1);
memcpy (path, prefix, prefix_len);
+diff --git a/gcc/config/linux.h b/gcc/config/linux.h
+index b525bcd56b3..ba02c013e30 100644
+--- a/gcc/config/linux.h
++++ b/gcc/config/linux.h
+@@ -129,53 +129,53 @@ see the files COPYING3 and COPYING.RUNTIME respectively. If not, see
+ * Unfortunately, this is mostly duplicated from cppdefault.c */
+ #if DEFAULT_LIBC == LIBC_MUSL
+ #define INCLUDE_DEFAULTS_MUSL_GPP \
+- { GPLUSPLUS_INCLUDE_DIR, "G++", 1, 1, \
++ { GPLUSPLUS_INCLUDE_DIRVAR, "G++", 1, 1, \
+ GPLUSPLUS_INCLUDE_DIR_ADD_SYSROOT, 0 }, \
+- { GPLUSPLUS_TOOL_INCLUDE_DIR, "G++", 1, 1, \
++ { GPLUSPLUS_TOOL_INCLUDE_DIRVAR, "G++", 1, 1, \
+ GPLUSPLUS_INCLUDE_DIR_ADD_SYSROOT, 1 }, \
+- { GPLUSPLUS_BACKWARD_INCLUDE_DIR, "G++", 1, 1, \
++ { GPLUSPLUS_BACKWARD_INCLUDE_DIRVAR, "G++", 1, 1, \
+ GPLUSPLUS_INCLUDE_DIR_ADD_SYSROOT, 0 },
+
+ #ifdef LOCAL_INCLUDE_DIR
+ #define INCLUDE_DEFAULTS_MUSL_LOCAL \
+- { LOCAL_INCLUDE_DIR, 0, 0, 1, 1, 2 }, \
+- { LOCAL_INCLUDE_DIR, 0, 0, 1, 1, 0 },
++ { LOCAL_INCLUDE_DIRVAR, 0, 0, 1, 1, 2 }, \
++ { LOCAL_INCLUDE_DIRVAR, 0, 0, 1, 1, 0 },
+ #else
+ #define INCLUDE_DEFAULTS_MUSL_LOCAL
+ #endif
+
+ #ifdef PREFIX_INCLUDE_DIR
+ #define INCLUDE_DEFAULTS_MUSL_PREFIX \
+- { PREFIX_INCLUDE_DIR, 0, 0, 1, 0, 0},
++ { PREFIX_INCLUDE_DIRVAR, 0, 0, 1, 0, 0},
+ #else
+ #define INCLUDE_DEFAULTS_MUSL_PREFIX
+ #endif
+
+ #ifdef CROSS_INCLUDE_DIR
+ #define INCLUDE_DEFAULTS_MUSL_CROSS \
+- { CROSS_INCLUDE_DIR, "GCC", 0, 0, 0, 0},
++ { CROSS_INCLUDE_DIRVAR, "GCC", 0, 0, 0, 0},
+ #else
+ #define INCLUDE_DEFAULTS_MUSL_CROSS
+ #endif
+
+ #ifdef TOOL_INCLUDE_DIR
+ #define INCLUDE_DEFAULTS_MUSL_TOOL \
+- { TOOL_INCLUDE_DIR, "BINUTILS", 0, 1, 0, 0},
++ { TOOL_INCLUDE_DIRVAR, "BINUTILS", 0, 1, 0, 0},
+ #else
+ #define INCLUDE_DEFAULTS_MUSL_TOOL
+ #endif
+
+ #ifdef GCC_INCLUDE_SUBDIR_TARGET
+ #define INCLUDE_DEFAULTS_MUSL_SUBDIR_TARGET \
+- { STANDARD_STARTFILE_PREFIX_2 GCC_INCLUDE_SUBDIR_TARGET, "GCC", 0, 0, 1, 0},
++ { STANDARD_STARTFILE_PREFIX_2VAR, "GCC", 0, 0, 1, 0},
+ #else
+ #define INCLUDE_DEFAULTS_MUSL_SUBDIR_TARGET
+ #endif
+
+ #ifdef NATIVE_SYSTEM_HEADER_DIR
+ #define INCLUDE_DEFAULTS_MUSL_NATIVE \
+- { NATIVE_SYSTEM_HEADER_DIR, 0, 0, 0, 1, 2 }, \
+- { NATIVE_SYSTEM_HEADER_DIR, 0, 0, 0, 1, 0 },
++ { NATIVE_SYSTEM_HEADER_DIRVAR, 0, 0, 0, 1, 2 }, \
++ { NATIVE_SYSTEM_HEADER_DIRVAR, 0, 0, 0, 1, 0 },
+ #else
+ #define INCLUDE_DEFAULTS_MUSL_NATIVE
+ #endif
+@@ -200,7 +200,7 @@ see the files COPYING3 and COPYING.RUNTIME respectively. If not, see
+ INCLUDE_DEFAULTS_MUSL_TOOL \
+ INCLUDE_DEFAULTS_MUSL_SUBDIR_TARGET \
+ INCLUDE_DEFAULTS_MUSL_NATIVE \
+- { GCC_INCLUDE_DIR, "GCC", 0, 1, 0, 0 }, \
++ { GCC_INCLUDE_DIRVAR, "GCC", 0, 1, 0, 0 }, \
+ { 0, 0, 0, 0, 0, 0 } \
+ }
+ #endif
+diff --git a/gcc/config/rs6000/sysv4.h b/gcc/config/rs6000/sysv4.h
+index 0c2bba5ea32..313a8de4417 100644
+--- a/gcc/config/rs6000/sysv4.h
++++ b/gcc/config/rs6000/sysv4.h
+@@ -959,53 +959,53 @@ ncrtn.o%s"
+ /* Include order changes for musl, same as in generic linux.h. */
+ #if DEFAULT_LIBC == LIBC_MUSL
+ #define INCLUDE_DEFAULTS_MUSL_GPP \
+- { GPLUSPLUS_INCLUDE_DIR, "G++", 1, 1, \
++ { GPLUSPLUS_INCLUDE_DIRVAR, "G++", 1, 1, \
+ GPLUSPLUS_INCLUDE_DIR_ADD_SYSROOT, 0 }, \
+- { GPLUSPLUS_TOOL_INCLUDE_DIR, "G++", 1, 1, \
++ { GPLUSPLUS_TOOL_INCLUDE_DIRVAR, "G++", 1, 1, \
+ GPLUSPLUS_INCLUDE_DIR_ADD_SYSROOT, 1 }, \
+- { GPLUSPLUS_BACKWARD_INCLUDE_DIR, "G++", 1, 1, \
++ { GPLUSPLUS_BACKWARD_INCLUDE_DIRVAR, "G++", 1, 1, \
+ GPLUSPLUS_INCLUDE_DIR_ADD_SYSROOT, 0 },
+
+ #ifdef LOCAL_INCLUDE_DIR
+ #define INCLUDE_DEFAULTS_MUSL_LOCAL \
+- { LOCAL_INCLUDE_DIR, 0, 0, 1, 1, 2 }, \
+- { LOCAL_INCLUDE_DIR, 0, 0, 1, 1, 0 },
++ { LOCAL_INCLUDE_DIRVAR, 0, 0, 1, 1, 2 }, \
++ { LOCAL_INCLUDE_DIRVAR, 0, 0, 1, 1, 0 },
+ #else
+ #define INCLUDE_DEFAULTS_MUSL_LOCAL
+ #endif
+
+ #ifdef PREFIX_INCLUDE_DIR
+ #define INCLUDE_DEFAULTS_MUSL_PREFIX \
+- { PREFIX_INCLUDE_DIR, 0, 0, 1, 0, 0},
++ { PREFIX_INCLUDE_DIRVAR, 0, 0, 1, 0, 0},
+ #else
+ #define INCLUDE_DEFAULTS_MUSL_PREFIX
+ #endif
+
+ #ifdef CROSS_INCLUDE_DIR
+ #define INCLUDE_DEFAULTS_MUSL_CROSS \
+- { CROSS_INCLUDE_DIR, "GCC", 0, 0, 0, 0},
++ { CROSS_INCLUDE_DIRVAR, "GCC", 0, 0, 0, 0},
+ #else
+ #define INCLUDE_DEFAULTS_MUSL_CROSS
+ #endif
+
+ #ifdef TOOL_INCLUDE_DIR
+ #define INCLUDE_DEFAULTS_MUSL_TOOL \
+- { TOOL_INCLUDE_DIR, "BINUTILS", 0, 1, 0, 0},
++ { TOOL_INCLUDE_DIRVAR, "BINUTILS", 0, 1, 0, 0},
+ #else
+ #define INCLUDE_DEFAULTS_MUSL_TOOL
+ #endif
+
+ #ifdef GCC_INCLUDE_SUBDIR_TARGET
+ #define INCLUDE_DEFAULTS_MUSL_SUBDIR_TARGET \
+- { STANDARD_STARTFILE_PREFIX_2 GCC_INCLUDE_SUBDIR_TARGET, "GCC", 0, 0, 1, 0},
++ { STANDARD_STARTFILE_PREFIX_2VAR, "GCC", 0, 0, 1, 0},
+ #else
+ #define INCLUDE_DEFAULTS_MUSL_SUBDIR_TARGET
+ #endif
+
+ #ifdef NATIVE_SYSTEM_HEADER_DIR
+ #define INCLUDE_DEFAULTS_MUSL_NATIVE \
+- { NATIVE_SYSTEM_HEADER_DIR, 0, 0, 0, 1, 2 }, \
+- { NATIVE_SYSTEM_HEADER_DIR, 0, 0, 0, 1, 0 },
++ { NATIVE_SYSTEM_HEADER_DIRVAR, 0, 0, 0, 1, 2 }, \
++ { NATIVE_SYSTEM_HEADER_DIRVAR, 0, 0, 0, 1, 0 },
+ #else
+ #define INCLUDE_DEFAULTS_MUSL_NATIVE
+ #endif
+@@ -1030,7 +1030,7 @@ ncrtn.o%s"
+ INCLUDE_DEFAULTS_MUSL_TOOL \
+ INCLUDE_DEFAULTS_MUSL_SUBDIR_TARGET \
+ INCLUDE_DEFAULTS_MUSL_NATIVE \
+- { GCC_INCLUDE_DIR, "GCC", 0, 1, 0, 0 }, \
++ { GCC_INCLUDE_DIRVAR, "GCC", 0, 1, 0, 0 }, \
+ { 0, 0, 0, 0, 0, 0 } \
+ }
+ #endif
diff --git a/gcc/cppdefault.c b/gcc/cppdefault.c
index d54d6ce0076..784a92a0c24 100644
--- a/gcc/cppdefault.c
diff --git a/poky/meta/recipes-devtools/gcc/gcc/0028-Add-ssp_nonshared-to-link-commandline-for-musl-targe.patch b/poky/meta/recipes-devtools/gcc/gcc/0028-Add-ssp_nonshared-to-link-commandline-for-musl-targe.patch
index edca9e3..9c616d2 100644
--- a/poky/meta/recipes-devtools/gcc/gcc/0028-Add-ssp_nonshared-to-link-commandline-for-musl-targe.patch
+++ b/poky/meta/recipes-devtools/gcc/gcc/0028-Add-ssp_nonshared-to-link-commandline-for-musl-targe.patch
@@ -22,12 +22,10 @@
gcc/config/rs6000/linux64.h | 10 ++++++++++
3 files changed, 27 insertions(+)
-diff --git a/gcc/config/linux.h b/gcc/config/linux.h
-index 87efc5f69fe..3c7b7c538b9 100644
--- a/gcc/config/linux.h
+++ b/gcc/config/linux.h
-@@ -195,6 +195,13 @@ see the files COPYING3 and COPYING.RUNTIME respectively. If not, see
- { GCC_INCLUDE_DIR, "GCC", 0, 1, 0, 0 }, \
+@@ -203,6 +203,13 @@ see the files COPYING3 and COPYING.RUNTI
+ { GCC_INCLUDE_DIRVAR, "GCC", 0, 1, 0, 0 }, \
{ 0, 0, 0, 0, 0, 0 } \
}
+#ifdef TARGET_LIBC_PROVIDES_SSP
@@ -40,8 +38,6 @@
#endif
<