blob: 42e4af8c063f01562c3521afa23af12c542315a2 [file] [log] [blame]
#!/bin/bash
# Provide source directive to shellcheck.
# shellcheck source=meta-fii/meta-kudo/recipes-kudo/kudo-fw-utility/kudo-fw/kudo-lib.sh
# Disable check for globbing and word splitting within double quotes
# shellcheck disable=SC2086
source /usr/libexec/kudo-fw/kudo-lib.sh
function fwbios() {
KERNEL_FIU_ID="c0000000.spi"
KERNEL_SYSFS_FIU="/sys/bus/platform/drivers/NPCM-FIU"
# switch the SPI mux from Host to BMC
i2cset -y -f -a ${I2C_BMC_CPLD[0]} 0x${I2C_BMC_CPLD[1]} 0x10 0x01
# rescan the spi bus
if [ -d "${KERNEL_SYSFS_FIU}/${KERNEL_FIU_ID}" ]; then
echo "${KERNEL_FIU_ID}" > "${KERNEL_SYSFS_FIU}"/unbind
sleep 1
fi
echo "${KERNEL_FIU_ID}" > "${KERNEL_SYSFS_FIU}"/bind
# write to the mtd device
BIOS_MTD=$(grep "bios" /proc/mtd | sed -n 's/^\(.*\):.*/\1/p')
if [ ! -f "$1" ]; then
echo " Cannot find the" "$1" "image file"
return 1
fi
echo "Flashing BIOS @/dev/${BIOS_MTD}"
if [ "$(flashcp -v $1 /dev/${BIOS_MTD})" -ne 0 ]; then
echo "Flashing the bios failed " >&2
return 1
fi
wait
# switch the SPI mux from BMC to Host
if [ -d "${KERNEL_SYSFS_FIU}/${KERNEL_FIU_ID}" ]; then
echo "${KERNEL_FIU_ID}" > "${KERNEL_SYSFS_FIU}"/unbind
fi
i2cset -y -f -a ${I2C_BMC_CPLD[0]} 0x${I2C_BMC_CPLD[1]} 0x10 0x00
# Disable LPI mode NV_SI_CPU_LPI_FREQ_DISABLE for SCP 1.06 and older.
if [ "$(nvparm -s 0x1 -o 0x114090)" -ne 0 ]; then
echo "Setting LPI mode for SCP 1.06 and older failed " >&2
return 1
fi
# Disable LPI mode NV_SI_CPU_LPI_FREQ_DISABLE for SCP 1.07 and newer
if [ "$(nvparm -s 0x1 -o 0x02A8)" -ne 0 ]; then
echo "Setting LPI mode for SCP 1.07 and newer failed " >&2
return 1
fi
# Disable toggling of SMPro heartbeat
if [ "$(nvparm -s 0x0 -o 0x5F0638)" -ne 0 ]; then
echo "Setting SMpro heartbeat failed " >&2
return 1
fi
if [[ $(find "$1" -type f -size +17156k 2>/dev/null) ]]; then
echo "Extracting the SCP from the image"
dd if="$1" bs=1024 skip=17156 count=256 of=/run/initramfs/myscp.img
# Update both primary and backup EEPROM
fwscp /run/initramfs/myscp.img
fwscpback /run/initramfs/myscp.img
fi
return 0
}
function fwbmccpld() {
# BMC_JTAG_MUX_1 0:BMC 1:MB
set_gpio_ctrl MB_JTAG_MUX_SEL 0
if [ "$(loadsvf -d /dev/jtag0 -s $1 -m 0)" -ne 0 ]; then
echo "BMC CPLD update failed" >&2
return 1
fi
wait
set_gpio_ctrl MB_JTAG_MUX_SEL 1
return 0
}
function fwmbcpld() {
# BMC_JTAG_MUX_1 0:BMC 1:MB
# BMC_JTAG_SEL 0:BMC 1:CPU
set_gpio_ctrl MB_JTAG_MUX_SEL 1
set_gpio_ctrl BMC_JTAG_MUX_SEL 1
if [ "$(loadsvf -d /dev/jtag0 -s $1 -m 0)" -ne 0 ]; then
echo "Mobo CPLD update failed" >&2
return 1
fi
wait
return 0
}
function fwscp() {
# BMC_I2C_BACKUP_SEL 0:failover, 1:main
# BMC_CPU_EEPROM_I2C_SEL 0:BMC, 1:CPU
scp_eeprom_sel=$(get_gpio_ctrl BACKUP_SCP_SEL)
set_gpio_ctrl BACKUP_SCP_SEL 1
set_gpio_ctrl CPU_EEPROM_SEL 0
if [ "$(ampere_eeprom_prog -b ${I2C_CPU_EEPROM[0]} -s 0x${I2C_CPU_EEPROM[1]} -p -f $1)" -ne 0 ]; then
echo "SCP eeprom update failed" >&2
return 1
fi
wait
set_gpio_ctrl CPU_EEPROM_SEL 1
set_gpio_ctrl BACKUP_SCP_SEL "$scp_eeprom_sel"
return 0
}
function fwscpback() {
# BMC_I2C_BACKUP_SEL 0:failover, 1:main
# BMC_CPU_EEPROM_I2C_SEL 0:BMC, 1:CPU
scp_eeprom_sel=$(get_gpio_ctrl BACKUP_SCP_SEL)
set_gpio_ctrl BACKUP_SCP_SEL 0
set_gpio_ctrl CPU_EEPROM_SEL 0
if [ "$(ampere_eeprom_prog -b ${I2C_CPU_EEPROM[0]} -s 0x${I2C_CPU_EEPROM[1]} -p -f $1)" -ne 0 ]; then
echo "SCP BACKUP eeprom update failed" >&2
return 1
fi
wait
set_gpio_ctrl CPU_EEPROM_SEL 1
set_gpio_ctrl BACKUP_SCP_SEL "$scp_eeprom_sel"
return 0
}
function fwmb_pwr_seq(){
#$1 0x40 seq config file
#$2 0x41 seq config file
if [[ ! -e "$1" ]]; then
echo "The file $1 does not exist"
return 1
fi
if [[ ! -e "$2" ]]; then
echo "The file $2 file does not exist"
return 1
fi
echo ${I2C_MB_PWRSEQ1[0]}-00${I2C_MB_PWRSEQ1[1]} > /sys/bus/i2c/drivers/adm1266/unbind
echo ${I2C_MB_PWRSEQ2[0]}-00${I2C_MB_PWRSEQ2[1]} > /sys/bus/i2c/drivers/adm1266/unbind
if [ "$(adm1266_fw_fx $1 $2)" -ne 0 ]; then
echo "The power seq flash failed" >&2
return 1
fi
echo ${I2C_MB_PWRSEQ1[0]}-00${I2C_MB_PWRSEQ1[1]} > /sys/bus/i2c/drivers/adm1266/bind
echo ${I2C_MB_PWRSEQ2[0]}-00${I2C_MB_PWRSEQ2[1]} > /sys/bus/i2c/drivers/adm1266/bind
return 0
}
if [[ ! $(which flashcp) ]]; then
echo "flashcp utility not installed"
exit 1
fi
if [[ ! $(which ampere_eeprom_prog) ]]; then
echo "ampere_eeprom_prog utility not installed"
exit 1
fi
if [[ ! $(which loadsvf) ]]; then
echo "loadsvf utility not installed"
exit 1
fi
if [[ ! -e /dev/jtag0 ]]; then
echo "Jtag device driver not functional"
exit 1
fi
case $1 in
bios)
fwbios "$2"
;;
bmccpld)
fwbmccpld "$2"
;;
mbcpld)
fwmbcpld "$2"
;;
scp)
fwscp "$2"
;;
scpback)
fwscpback "$2"
;;
mbseq)
fwmb_pwr_seq "$2" "$3"
;;
*)
;;
esac
ret=$?
rm -f "$2" "$3"
exit $ret