quanta: update gsj machine configuration
Commit GSJ project configurations.
1. Add configuration for u-boot-evn.
2. Update kernel configuration.
3. Add gsj suffix to some properties.
Tested: Build Quanta GSJ image and load on the GSJ BMC module.
Ensure that BMC boots to console successfully.
(From meta-quanta rev: fc91a4374e2576e940f9c70f34cfe5af9d0aa727)
Change-Id: I2de3b60db65f744bdc1a573efd063b999aa2536e
Signed-off-by: Fran Hsu <Fran.Hsu@quantatw.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
diff --git a/meta-quanta/meta-gsj/recipes-bsp/u-boot/u-boot-fw-utils-nuvoton/fw_env.config b/meta-quanta/meta-gsj/recipes-bsp/u-boot/u-boot-fw-utils-nuvoton/fw_env.config
new file mode 100644
index 0000000..0c38427
--- /dev/null
+++ b/meta-quanta/meta-gsj/recipes-bsp/u-boot/u-boot-fw-utils-nuvoton/fw_env.config
@@ -0,0 +1,24 @@
+# Configuration file for fw_(printenv/setenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+# Notice, that the "Number of sectors" is not required on NOR and SPI-dataflash.
+# Futhermore, if the Flash sector size is ommitted, this value is assumed to
+# be the same as the Environment size, which is valid for NOR and SPI-dataflash
+
+# NOR example
+# MTD device name Device offset Env. size Flash sector size Number of sectors
+/dev/mtd2 0x0000 0x40000 0x4000
+
+# MTD SPI-dataflash example
+# MTD device name Device offset Env. size Flash sector size Number of sectors
+#/dev/mtd5 0x4200 0x4200
+#/dev/mtd6 0x4200 0x4200
+
+# NAND example
+#/dev/mtd0 0x4000 0x4000 0x20000 2
+
+# Block device example
+#/dev/mmcblk0 0xc0000 0x20000
+
+# VFAT example
+#/boot/uboot.env 0x0000 0x4000
diff --git a/meta-quanta/meta-gsj/recipes-bsp/u-boot/u-boot-fw-utils-nuvoton_%.bbappend b/meta-quanta/meta-gsj/recipes-bsp/u-boot/u-boot-fw-utils-nuvoton_%.bbappend
new file mode 100644
index 0000000..c5aea40
--- /dev/null
+++ b/meta-quanta/meta-gsj/recipes-bsp/u-boot/u-boot-fw-utils-nuvoton_%.bbappend
@@ -0,0 +1,7 @@
+FILESEXTRAPATHS_prepend_gsj := "${THISDIR}/${PN}:"
+
+SRC_URI_append_gsj = " file://fw_env.config"
+
+do_install_append_gsj () {
+ install -m 644 ${WORKDIR}/fw_env.config ${D}${sysconfdir}/fw_env.config
+}
diff --git a/meta-quanta/meta-gsj/recipes-kernel/linux/linux-nuvoton/gsj.cfg b/meta-quanta/meta-gsj/recipes-kernel/linux/linux-nuvoton/gsj.cfg
index 9435516..d498a2b 100644
--- a/meta-quanta/meta-gsj/recipes-kernel/linux/linux-nuvoton/gsj.cfg
+++ b/meta-quanta/meta-gsj/recipes-kernel/linux/linux-nuvoton/gsj.cfg
@@ -46,3 +46,17 @@
CONFIG_USB_CONFIGFS_EEM=y
CONFIG_USB_CONFIGFS_MASS_STORAGE=y
CONFIG_USB_CONFIGFS_F_HID=y
+
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_SENSORS_LM25066=y
+CONFIG_I2C_SLAVE=y
+CONFIG_I2C_SLAVE_MQUEUE=y
+CONFIG_NUVOTON_JTAG=y
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_EDAC=y
+CONFIG_EDAC_LEGACY_SYSFS=y
+CONFIG_EDAC_DEBUG=y
+CONFIG_EDAC_NPCM7XX=y
+CONFIG_RAS=y