| ; This is a sample ~/.gammurc file. |
| ; In Unix/Linux copy it into your home directory and name it .gammurc |
| ; or into /etc and name it gammurc |
| ; In Win32 copy it into directory with Gammu.exe and name gammurc |
| ; More about parameters later |
| ; Anything behind ; or # is comment. |
| ; ----------------------------------------------------------------------------- |
| |
| [gammu] |
| |
| device = /dev/ttyUSB0 |
| connection = at115200 |
| ; Do not use model configuration unless you really need it |
| ;model = 6110 |
| ;synchronizetime = yes |
| ;logfile = gammulog |
| ;logformat = textall |
| ;use_locking = yes |
| ;gammuloc = locfile |
| ;startinfo = yes |
| ;gammucoding = utf8 |
| ;usephonedb = yes |
| |
| ;[gammu1] |
| |
| ;device = com8: |
| ;model = 6110 |
| ;connection = fbusblue |
| ;synchronizetime = yes |
| ;logfile = gammulog |
| ;logformat = textall |
| ;use_locking = yes |
| ;gammuloc = locfile |
| ;startinfo = yes |
| ;gammucoding = utf8 |
| |
| ; Step 1. Please find required Connection parameter and look into assigned |
| ; with it device type. With some Connection you must set concrete model |
| |
| ; ================================================================ cables ===== |
| ; New Nokia protocol for FBUS/DAU9P |
| ; Connection "fbus", device type serial |
| ; New Nokia protocol for DLR3/DLR3P |
| ; Connection "fbusdlr3"/"dlr3", device type serial |
| ; New Nokia protocol for DKU2 (and phone with USB converter on phone mainboard |
| ; like 6230) |
| ; Connection "dku2phonet"/"dku2", device type dku2 on Windows |
| ; Connection "fbususb" on Linux |
| ; New Nokia protocol for DKU5 (and phone without USB converter on phone |
| ; mainboard like 5100) |
| ; Connection "dku5fbus"/"dku5", device type dku5 |
| ; New Nokia protocol for PL2303 USB cable (and phone without USB converter |
| ; on phone mainboard like 5100) |
| ; Connection "fbuspl2303", device type usb |
| ; Old Nokia protocol for MBUS/DAU9P |
| ; Connection "mbus", device type serial |
| ; Variants: |
| ; You can modify a bit behaviour of connection using additional flags |
| ; specified just after connection name like connection-variant. |
| ; If you're using ARK3116 cable (or any other which does not like dtr |
| ; handling), you might need -nodtr variant of connection, eg. dlr3-nodtr. |
| ; If cable you use is not powered over DTR/RTS, try using -nopower variant of |
| ; connection, eg. fbus-nopower. |
| ; ----------------------------------------------------------------------------- |
| ; AT commands for DLR3, DKU5 or other AT compatible cable (8 bits, None |
| ; parity, no flow control, 1 stop bit). Used with Nokia, Alcatel, Siemens, etc. |
| ; Connection "at19200"/"at115200"/.., device type serial |
| ; AT commands for DKU2 cable |
| ; Connection "dku2at", device type dku2 |
| ; ============================================================== infrared ===== |
| ; Nokia protocol for infrared with Nokia 6110/6130/6150 |
| ; Connection "fbusirda"/"infrared", device type serial |
| ; Nokia protocol for infrared with other Nokia models |
| ; Connection "irdaphonet"/"irda", device type irda |
| ; ----------------------------------------------------------------------------- |
| ; AT commands for infrared. Used with Nokia, Alcatel, Siemens, etc. |
| ; Connection "irdaat", device type irda |
| ; ----------------------------------------------------------------------------- |
| ; OBEX for infrared |
| ; Connection "irdaobex", device type irda. |
| ; ============================================================= Bluetooth ===== |
| ; Nokia protocol with serial device set in BT stack (WidComm, other) from |
| ; adequate service and Nokia 6210 |
| ; Connection "fbusblue", device type serial |
| ; Nokia protocol with serial device set in BT stack (WidComm, other) from |
| ; adequate service and other Nokia models |
| ; Connection "phonetblue", device type serial |
| ; ----------------------------------------------------------------------------- |
| ; Nokia protocol for Bluetooth stack with Nokia 6210 |
| ; Connection "bluerffbus", device type BT |
| ; Nokia protocol for Bluetooth stack with DCT4 Nokia models, which don't inform |
| ; about services correctly (6310, 6310i with firmware lower than 5.50, 8910,..) |
| ; Connection "bluerfphonet", device type BT |
| ; Nokia protocol for Bluetooth stack with other DCT4 Nokia models |
| ; Connection "bluephonet", device type BT |
| ; ----------------------------------------------------------------------------- |
| ; AT commands for Bluetooth stack and 6210 / DCT4 Nokia models, which don't |
| ; inform about BT services correctly (6310, 6310i with firmware lower |
| ; than 5.50, 8910,..) |
| ; Connection "bluerfat", device type BT |
| ; AT commands for Bluetooth stack with other phones (Siemens, other Nokia,etc.) |
| ; Connection "blueat", device type BT |
| ; ----------------------------------------------------------------------------- |
| ; OBEX for Bluetooth stack with DCT4 Nokia models, which don't inform about |
| ; BT services correctly (6310, 6310i with firmware lower than 5.50, 8910,...) |
| ; Connection "bluerfobex", device type BT |
| ; OBEX for Bluetooth stack with other phones (Siemens, other Nokia, etc.) |
| ; Connection "blueobex", device type BT. |
| ; ----------------------------------------------------------------------------- |
| ; Connection "bluerfgnapbus", device type BT, model "gnap" |
| ; Connection "irdagnapbus", device type irda, model "gnap" |
| |
| ; Step2. According to device type from Step1 and used OS set Port parameter |
| |
| ; ----------------------------------------------------------------------------- |
| ; Port type | "Port" parameter in Windows/DOS | "Port" parameter in Linux/Unix |
| ; ----------|---------------------------------|-------------------------------- |
| ; serial | "com*:" | "/dev/ttyS*" |
| ; | (example "com1:") | (example "/dev/ttyS1") |
| ; | | or "/dev/tts/**" (with DevFS) |
| ; | | virtual serial ports like |
| ; | | "/dev/ircomm*" or "/dev/rfcomm*" |
| ; ----------|---------------------------------|-------------------------------- |
| ; irda | ignored (can be empty) | ignored (can be empty) |
| ; ----------|---------------------------------|-------------------------------- |
| ; BT | Bluetooth device address (example "00:11:22:33:44:55"). |
| ; | Optionally you can also include channel after slash |
| ; | (example "00:11:22:33:44:55/12"). Can be also empty. |
| ; ----------|---------------------------------|-------------------------------- |
| ; dku2 | ignored (can be empty) | /dev/ttyUSB* or /dev/ttyACM* |
| ; ----------|---------------------------------|-------------------------------- |
| ; dku5 | ignored (can be empty) | connection with it not possible |
| ; ----------|---------------------------------|-------------------------------- |
| ; usb | connection with it not possible | "/dev/ttyUSB*" |
| |
| ; Step3. Set other config parameters |
| |
| ; ----------------------------------------------------------------------------- |
| ; Parameter name | Description |
| ; ----------------|------------------------------------------------------------ |
| ; Model | Should not be used unless you have a good reason to do so. |
| ; | If Gammu doesn't recognize your phone model, put it here. |
| ; | Example values: "6110", "6150", "6210", "8210" |
| ; SynchronizeTime | if you want to set time from computer to phone during |
| ; | starting connection. Do not rather use this option when |
| ; | when to reset phone during connection (in some phones need |
| ; | to set time again after restart) |
| ; GammuLoc | name of localisation file |
| ; StartInfo | this option allow to set, that you want (setting "yes") |
| ; | to see message on the phone screen or phone should enable |
| ; | light for a moment during starting connection. Phone |
| ; | WON'T beep during starting connection with this option. |
| ; GammuCoding | forces using specified codepage (in win32 - for example |
| ; | "1250" will force CP1250) or UTF8 (in Linux - "utf8") |
| ; ----------------|------------------------------------------------------------ |
| ; Logfile | Use, when want to have logfile from communication. |
| ; Logformat | What debug info and format should be used: |
| ; | "nothing" - no debug level (default) |
| ; | "text" - transmission dump in text format |
| ; | "textall" - all possible info in text format |
| ; | "errors" - errors in text format |
| ; | "binary" - transmission dump in binary format |
| ; ----------------|------------------------------------------------------------ |
| ; Features | Custom features for phone. This can be used as override |
| ; | when values coded in common/gsmphones.c are bad or |
| ; | missing. Consult include/gammu-info.h for possible values |
| ; | (all Feature values without leading F_ prefix). |
| ; | Please report correct values to Gammu authors. |
| ; ----------------|------------------------------------------------------------ |
| ; Use_Locking | under Unix/Linux use "yes", if want to lock used device |
| ; | to prevent using it by other applications. In win32 ignored |
| |
| ; vim: et ts=4 sw=4 sts=4 tw=78 spell spelllang=en_us |