import-layers/meta-openembedded/meta-oe/recipes-extended/gnuplot/gnuplot/qtopia.trm - openbmc/openbmc - Gitiles

 /*
  * $Id: dumb.trm,v 1.16 2004/04/13 17:24:16 broeker Exp $
  *
  */

 /* GNUPLOT - qtopia.trm */

 /*[
  * Copyright 1991 - 1993, 1998, 2004   Thomas Williams, Colin Kelley
  *
  * Permission to use, copy, and distribute this software and its
  * documentation for any purpose with or without fee is hereby granted,
  * provided that the above copyright notice appear in all copies and
  * that both that copyright notice and this permission notice appear
  * in supporting documentation.
  *
  * Permission to modify the software is granted, but not the right to
  * distribute the complete modified source code.  Modifications are to
  * be distributed as patches to the released version.  Permission to
  * distribute binaries produced by compiling modified sources is granted,
  * provided you
  *   1. distribute the corresponding source modifications from the
  *    released version in the form of a patch file along with the binaries,
  *   2. add special version identification to distinguish your version
  *    in addition to the base release version number,
  *   3. provide your name and address as the primary contact for the
  *    support of your modified version, and
  *   4. retain our contact information in regard to use of the base
  *    software.
  * Permission to distribute the released version of the source code along
  * with corresponding source modifications in the form of a patch file is
  * granted with same provisions 2 through 4 for binary distributions.
  *
  * This software is provided "as is" without express or implied warranty
  * to the extent permitted by applicable law.
 ]*/

 /*
  * This file is included by ../term.c.
  *
  * This terminal driver supports:
  *   qtopia terminals
  *
  * AUTHORS
  *   Michael Neuroth, 2004-05-16
  *           INTERNET: michael.neuroth@freenet.de
  *
  * send your comments or suggestions to (gnuplot-info@lists.sourceforge.net).
  *
  */
 #include "driver.h"

 #define NO_QTOPIA_ENHANCED_SUPPORT

 #ifdef TERM_REGISTER
 register_term(qtopia_driver)
 #endif

 #ifdef TERM_PROTO
 TERM_PUBLIC void QTOPIA_options __PROTO((void));
 TERM_PUBLIC void QTOPIA_init __PROTO((void));
 TERM_PUBLIC void QTOPIA_graphics __PROTO((void));
 TERM_PUBLIC void QTOPIA_text __PROTO((void));
 TERM_PUBLIC void QTOPIA_reset __PROTO((void));
 TERM_PUBLIC void QTOPIA_linetype __PROTO((int linetype));
 TERM_PUBLIC void QTOPIA_move __PROTO((unsigned int x, unsigned int y));
 TERM_PUBLIC void QTOPIA_point __PROTO((unsigned int x, unsigned int y,
 				     int point));
 TERM_PUBLIC void QTOPIA_vector __PROTO((unsigned int x, unsigned int y));
 TERM_PUBLIC void QTOPIA_put_text __PROTO((unsigned int x, unsigned int y,
 					const char *str));
 TERM_PUBLIC void QTOPIA_arrow __PROTO((unsigned int sx, unsigned int sy,
 				     unsigned int ex, unsigned int ey,
 				     int head));

 #define ENHqtopia_put_text NULL


 #define QTOPIA_XMAX 4096
 #define QTOPIA_YMAX 4096

 #ifdef ZAURUS
 #define QTOPIA_VCHAR (QTOPIA_YMAX/25)
 #define QTOPIA_HCHAR (QTOPIA_XMAX/40)
 #define QTOPIA_VTIC (QTOPIA_YMAX/50)
 #define QTOPIA_HTIC (QTOPIA_XMAX/40)
 #else
 #define QTOPIA_VCHAR (QTOPIA_YMAX/25)
 #define QTOPIA_HCHAR (QTOPIA_XMAX/50)
 #define QTOPIA_VTIC (QTOPIA_YMAX/100)
 #define QTOPIA_HTIC (QTOPIA_XMAX/150)
 #endif

 #endif /* TERM_PROTO */

 #ifdef TERM_BODY

 /*#include <winsock2.h>*/
 /* needs: ws2_32.lib */
 #ifndef _MSC_VER
 #include <sys/types.h>
 #include <sys/socket.h>
 #include <netinet/in.h>
 #include <arpa/inet.h>
 #endif

 #define QTOPIA_MAX_BUFFER		512
 #define QTOPIA_MAX_DELAY_COUNT	20	/* * 100 ms = 2 s */

 #ifdef _MSC_VER
 #define QTOPIA_BAD_SOCKET		INVALID_SOCKET		/* -1 */
 #define QTOPIA_BAD_CONNECT		SOCKET_ERROR
 #else
 #define QTOPIA_BAD_SOCKET		-1
 #define QTOPIA_BAD_CONNECT		-1
 #endif
 #define QTOPIA_PORT_NO			5050

 static int qtopia_client_socket = QTOPIA_BAD_SOCKET;
 static unsigned short qtopia_port_no = QTOPIA_PORT_NO;
 static char qtopia_host_name[QTOPIA_MAX_BUFFER+1] = { "localhost" };

 static int OpenClient __PROTO(( int test));
 static void CloseClient();

 static void MySleep( delay )
 int delay;
 {
 #ifdef _MSC_VER
 	Sleep( delay );
 #else
 	usleep( delay );
 #endif
 }

 static void InitSockets()
 {
 #ifdef _MSC_VER
 	WORD wVersionRequested;
 	WSADATA wsaData;
 	int err;

 	wVersionRequested = MAKEWORD( 2, 2 );

 	err = WSAStartup( wVersionRequested, &wsaData );
 #endif
 }

 static void ExitSockets()
 {
 #ifdef _MSC_VER
 	WSACleanup();
 #endif
 }

 static int CheckForQtplot( count )
 int count;
 {
 	/* test (via sockets) if qtplot is allready running */
 	if( !OpenClient( 1 ) )
 	{
 		/* give qtplot a litle bit time to start... */
 		if( count < QTOPIA_MAX_DELAY_COUNT )
 		{
 			if( count == 0 )
 			{
 #ifdef _MSC_VER
 				system( "start qtplot" );
 #else
 				system( "qtplot&" );
 #endif
 			}

 			MySleep(100);

 			return CheckForQtplot( count+1 );
 		}
 		else
 		{
 			return 0;
 		}
 	}
 	else
 	{
 		CloseClient();

 		return 1;
 	}
 }

 static int OpenClient( test )
 int test;
 {
     int len;
     struct sockaddr_in address;
     int result;

 	/*  Create a socket for the client.  */

     qtopia_client_socket = socket(AF_INET, SOCK_STREAM, 0);

 	if( qtopia_client_socket != QTOPIA_BAD_SOCKET )
 	{
 		/*  Name the socket, as agreed with the server.  */

 		address.sin_family = AF_INET;
 		address.sin_addr.s_addr = inet_addr(/*qtopia_host_name*/"127.0.0.1");	/* localhost */
 		address.sin_port = htons(qtopia_port_no);
 		len = sizeof(address);

 		/*  Now connect our socket to the server's socket.  */

 		result = connect(qtopia_client_socket, (struct sockaddr *)&address, len);

 		if( result == QTOPIA_BAD_SOCKET )
 		{
 			/* mark this socket as bad */

 			close( qtopia_client_socket );

 			qtopia_client_socket = QTOPIA_BAD_SOCKET;

 			if( !test )
 			{
 				fprintf( gpoutfile, "error connecting to server !\n" );
 			}
 			return 0;	/* something went wrong */
 		}
 	}
 	else
 	{
 		if( !test )
 		{
 			fprintf( gpoutfile, "error creating socket !\n" );
 		}
 		return 0;	/* something went wrong */
 	}

 	return 1;	/* everything ist ok ! */
 }

 static void CloseClient()
 {
     close( qtopia_client_socket );
 }

 static int IsClientOk()
 {
 	return qtopia_client_socket != QTOPIA_BAD_SOCKET;
 }

 static void SendDataToSocket( sLine )
 const char * sLine;
 {
 	if( IsClientOk() )
 	{
 		int send_count;

 		send_count = send( qtopia_client_socket, sLine, strlen( sLine ), 0 );

 		if( send_count <= 0 )
 		{
 			fprintf( gpoutfile, "error writing to socket str=%s!\n", sLine );
 		}
 		/*
 		else
 		{
 			fprintf( gpoutfile, "wrote %d bytes\n", send_count );
 		}
 		*/
 	}
 	else
 	{
 		/* for testing... */
 		/*fprintf( gpoutfile, sLine );*/
 	}
 }

 /* ************************************************** */

 enum QTOPIA_id { QTOPIA_PORT, QTOPIA_HOST, QTOPIA_OTHER };

 static struct gen_table QTOPIA_opts[] =
 {
     { "po$rt", QTOPIA_PORT },
     { "ho$st", QTOPIA_HOST },
     { NULL, QTOPIA_OTHER }
 };

 TERM_PUBLIC void
 QTOPIA_options()
 {
     /* this is not for the qtopia terminal ! */
 	/*SendDataToSocket( "qtd options\n" );*/

     int x, y;
     struct value a;

     while (!END_OF_COMMAND)
 	{
 		switch(lookup_table(&QTOPIA_opts[0],c_token))
 		{
 			case QTOPIA_PORT:
 				c_token++;
 				if (END_OF_COMMAND)
 					int_error(c_token, "expecting port number");
 				qtopia_port_no = (int) real(const_express(&a));
 				break;
 			case QTOPIA_HOST:
 				c_token++;
 				if (END_OF_COMMAND)
 					int_error(c_token, "expecting host name");
 				if (isstring(c_token))
 					quote_str( qtopia_host_name, c_token, sizeof(qtopia_host_name) );
 				else
  					copy_str( qtopia_host_name, c_token, sizeof(qtopia_host_name) );
 				c_token++;
 				break;
 			case QTOPIA_OTHER:
 			default:
 				break;
 		}
     }

     sprintf(term_options, "host=%s port=%d",qtopia_host_name,qtopia_port_no);
 }


 TERM_PUBLIC void
 QTOPIA_init()
 {
 	/* initialize lib (if necassary) */
 	InitSockets();
 	CheckForQtplot( 0 );
 	OpenClient( 0 );

 	SendDataToSocket( "qtd init\n" );
 }


 TERM_PUBLIC void
 QTOPIA_graphics()
 {
 	SendDataToSocket( "qtd graphics\n" );
 }

 TERM_PUBLIC void
 QTOPIA_text()
 {
 	SendDataToSocket( "qtd text\n" );
 }


 TERM_PUBLIC void
 QTOPIA_reset()
 {
 	SendDataToSocket( "qtd reset\n" );

 	/* give the qtplot a litle bit time to shutdown */
 	MySleep(100);

 	CloseClient();
 	ExitSockets();
 }


 TERM_PUBLIC void
 QTOPIA_linetype(linetype)
 int linetype;
 {
 	char sBuffer[QTOPIA_MAX_BUFFER];

 	sprintf( sBuffer, "qtd linetype type=%d\n",linetype );

 	SendDataToSocket( sBuffer );
 }


 TERM_PUBLIC void
 QTOPIA_move(x, y)
 unsigned int x, y;
 {
 	char sBuffer[QTOPIA_MAX_BUFFER];

 	sprintf( sBuffer, "qtd move x=%d y=%d\n",x,y );

 	SendDataToSocket( sBuffer );
 }


 TERM_PUBLIC void
 QTOPIA_point(x, y, point)
 unsigned int x, y;
 int point;
 {
 	char sBuffer[QTOPIA_MAX_BUFFER];

 	sprintf( sBuffer, "qtd point x=%d y=%d point=%d\n",x,y,point );

 	SendDataToSocket( sBuffer );
 }


 TERM_PUBLIC void
 QTOPIA_vector(_x, _y)
 unsigned int _x, _y;
 {
 	char sBuffer[QTOPIA_MAX_BUFFER];

 	sprintf( sBuffer, "qtd vector x=%d y=%d\n",_x,_y );

 	SendDataToSocket( sBuffer );
 }


 TERM_PUBLIC void
 QTOPIA_put_text(x, y, str)
 unsigned int x, y;
 const char *str;
 {
 	char sBuffer[QTOPIA_MAX_BUFFER];

 	sprintf( sBuffer, "qtd put_text x=%d y=%d str=%s\n",x,y,str );

 	SendDataToSocket( sBuffer );
 }

 /* not suported yet ! */
 TERM_PUBLIC void
 QTOPIA_arrow(sx, sy, ex, ey, head)
     unsigned int sx, sy, ex, ey;
     int head;		/* ignored */
 {
 	char sBuffer[QTOPIA_MAX_BUFFER];

 	sprintf( sBuffer, "qtd arrow sx=%d sy=%d ex=%d ey=%d head=%d\n",sx,sy,ex,ey,head );

 	SendDataToSocket( sBuffer );
 }


 #endif /* TERM_BODY */

 #ifdef TERM_TABLE
 TERM_TABLE_START(qtopia_driver)
     "qtopia", "qtopia or Qt",
     QTOPIA_XMAX, QTOPIA_YMAX, QTOPIA_VCHAR, QTOPIA_HCHAR,
     QTOPIA_VTIC, QTOPIA_HTIC, QTOPIA_options, QTOPIA_init, QTOPIA_reset,
     QTOPIA_text, null_scale, QTOPIA_graphics, QTOPIA_move, QTOPIA_vector,
     QTOPIA_linetype, QTOPIA_put_text, null_text_angle,
     null_justify_text, QTOPIA_point, /*QTOPIA_arrow*/0, set_font_null,
     0,				/* pointsize */
     TERM_CAN_MULTIPLOT,
     NULL, NULL, NULL, NULL
 #ifdef USE_MOUSE
     , NULL, NULL, NULL, NULL, NULL
 #endif
 #ifdef PM3D
     , NULL, NULL, NULL, NULL
 #endif
 TERM_TABLE_END(qtopia_driver)

 #undef LAST_TERM
 #define LAST_TERM qtopia_driver

 #endif /* TERM_TABLE */

 #ifdef TERM_HELP
 START_HELP(qtopia)
 "1 qtopia",
 "?commands set terminal qtopia",
 "?set terminal qtopia",
 "?set term qtopia",
 "?terminal qtopia",
 "?term qtopia",
 "?qtopia",
 " The `qtopia` terminal driver has no additional options.",
 "",
 " Syntax:",
 "       set terminal qtopia",
 ""
 END_HELP(qtopia)
 #endif /* TERM_HELP */
	/*
	* $Id: dumb.trm,v 1.16 2004/04/13 17:24:16 broeker Exp $
	*
	*/

	/* GNUPLOT - qtopia.trm */

	/*[
	* Copyright 1991 - 1993, 1998, 2004 Thomas Williams, Colin Kelley
	*
	* Permission to use, copy, and distribute this software and its
	* documentation for any purpose with or without fee is hereby granted,
	* provided that the above copyright notice appear in all copies and
	* that both that copyright notice and this permission notice appear
	* in supporting documentation.
	*
	* Permission to modify the software is granted, but not the right to
	* distribute the complete modified source code. Modifications are to
	* be distributed as patches to the released version. Permission to
	* distribute binaries produced by compiling modified sources is granted,
	* provided you
	* 1. distribute the corresponding source modifications from the
	* released version in the form of a patch file along with the binaries,
	* 2. add special version identification to distinguish your version
	* in addition to the base release version number,
	* 3. provide your name and address as the primary contact for the
	* support of your modified version, and
	* 4. retain our contact information in regard to use of the base
	* software.
	* Permission to distribute the released version of the source code along
	* with corresponding source modifications in the form of a patch file is
	* granted with same provisions 2 through 4 for binary distributions.
	*
	* This software is provided "as is" without express or implied warranty
	* to the extent permitted by applicable law.
	]*/

	/*
	* This file is included by ../term.c.
	*
	* This terminal driver supports:
	* qtopia terminals
	*
	* AUTHORS
	* Michael Neuroth, 2004-05-16
	* INTERNET: michael.neuroth@freenet.de
	*
	* send your comments or suggestions to (gnuplot-info@lists.sourceforge.net).
	*
	*/
	#include "driver.h"

	#define NO_QTOPIA_ENHANCED_SUPPORT

	#ifdef TERM_REGISTER
	register_term(qtopia_driver)
	#endif

	#ifdef TERM_PROTO
	TERM_PUBLIC void QTOPIA_options __PROTO((void));
	TERM_PUBLIC void QTOPIA_init __PROTO((void));
	TERM_PUBLIC void QTOPIA_graphics __PROTO((void));
	TERM_PUBLIC void QTOPIA_text __PROTO((void));
	TERM_PUBLIC void QTOPIA_reset __PROTO((void));
	TERM_PUBLIC void QTOPIA_linetype __PROTO((int linetype));
	TERM_PUBLIC void QTOPIA_move __PROTO((unsigned int x, unsigned int y));
	TERM_PUBLIC void QTOPIA_point __PROTO((unsigned int x, unsigned int y,
	int point));
	TERM_PUBLIC void QTOPIA_vector __PROTO((unsigned int x, unsigned int y));
	TERM_PUBLIC void QTOPIA_put_text __PROTO((unsigned int x, unsigned int y,
	const char *str));
	TERM_PUBLIC void QTOPIA_arrow __PROTO((unsigned int sx, unsigned int sy,
	unsigned int ex, unsigned int ey,
	int head));

	#define ENHqtopia_put_text NULL


	#define QTOPIA_XMAX 4096
	#define QTOPIA_YMAX 4096

	#ifdef ZAURUS
	#define QTOPIA_VCHAR (QTOPIA_YMAX/25)
	#define QTOPIA_HCHAR (QTOPIA_XMAX/40)
	#define QTOPIA_VTIC (QTOPIA_YMAX/50)
	#define QTOPIA_HTIC (QTOPIA_XMAX/40)
	#else
	#define QTOPIA_VCHAR (QTOPIA_YMAX/25)
	#define QTOPIA_HCHAR (QTOPIA_XMAX/50)
	#define QTOPIA_VTIC (QTOPIA_YMAX/100)
	#define QTOPIA_HTIC (QTOPIA_XMAX/150)
	#endif

	#endif /* TERM_PROTO */

	#ifdef TERM_BODY

	/#include <winsock2.h>/
	/* needs: ws2_32.lib */
	#ifndef _MSC_VER
	#include <sys/types.h>
	#include <sys/socket.h>
	#include <netinet/in.h>
	#include <arpa/inet.h>
	#endif

	#define QTOPIA_MAX_BUFFER 512
	#define QTOPIA_MAX_DELAY_COUNT 20 /* * 100 ms = 2 s */

	#ifdef _MSC_VER
	#define QTOPIA_BAD_SOCKET INVALID_SOCKET /* -1 */
	#define QTOPIA_BAD_CONNECT SOCKET_ERROR
	#else
	#define QTOPIA_BAD_SOCKET -1
	#define QTOPIA_BAD_CONNECT -1
	#endif
	#define QTOPIA_PORT_NO 5050

	static int qtopia_client_socket = QTOPIA_BAD_SOCKET;
	static unsigned short qtopia_port_no = QTOPIA_PORT_NO;
	static char qtopia_host_name[QTOPIA_MAX_BUFFER+1] = { "localhost" };

	static int OpenClient __PROTO(( int test));
	static void CloseClient();

	static void MySleep( delay )
	int delay;
	{
	#ifdef _MSC_VER
	Sleep( delay );
	#else
	usleep( delay );
	#endif
	}

	static void InitSockets()
	{
	#ifdef _MSC_VER
	WORD wVersionRequested;
	WSADATA wsaData;
	int err;

	wVersionRequested = MAKEWORD( 2, 2 );

	err = WSAStartup( wVersionRequested, &wsaData );
	#endif
	}

	static void ExitSockets()
	{
	#ifdef _MSC_VER
	WSACleanup();
	#endif
	}

	static int CheckForQtplot( count )
	int count;
	{
	/* test (via sockets) if qtplot is allready running */
	if( !OpenClient( 1 ) )
	{
	/* give qtplot a litle bit time to start... */
	if( count < QTOPIA_MAX_DELAY_COUNT )
	{
	if( count == 0 )
	{
	#ifdef _MSC_VER
	system( "start qtplot" );
	#else
	system( "qtplot&" );
	#endif
	}

	MySleep(100);

	return CheckForQtplot( count+1 );
	}
	else
	{
	return 0;
	}
	}
	else
	{
	CloseClient();

	return 1;
	}
	}

	static int OpenClient( test )
	int test;
	{
	int len;
	struct sockaddr_in address;
	int result;

	/* Create a socket for the client. */

	qtopia_client_socket = socket(AF_INET, SOCK_STREAM, 0);

	if( qtopia_client_socket != QTOPIA_BAD_SOCKET )
	{
	/* Name the socket, as agreed with the server. */

	address.sin_family = AF_INET;
	address.sin_addr.s_addr = inet_addr(/qtopia_host_name/"127.0.0.1"); /* localhost */
	address.sin_port = htons(qtopia_port_no);
	len = sizeof(address);

	/* Now connect our socket to the server's socket. */

	result = connect(qtopia_client_socket, (struct sockaddr *)&address, len);

	if( result == QTOPIA_BAD_SOCKET )
	{
	/* mark this socket as bad */

	close( qtopia_client_socket );

	qtopia_client_socket = QTOPIA_BAD_SOCKET;

	if( !test )
	{
	fprintf( gpoutfile, "error connecting to server !\n" );
	}
	return 0; /* something went wrong */
	}
	}
	else
	{
	if( !test )
	{
	fprintf( gpoutfile, "error creating socket !\n" );
	}
	return 0; /* something went wrong */
	}

	return 1; /* everything ist ok ! */
	}

	static void CloseClient()
	{
	close( qtopia_client_socket );
	}

	static int IsClientOk()
	{
	return qtopia_client_socket != QTOPIA_BAD_SOCKET;
	}

	static void SendDataToSocket( sLine )
	const char * sLine;
	{
	if( IsClientOk() )
	{
	int send_count;

	send_count = send( qtopia_client_socket, sLine, strlen( sLine ), 0 );

	if( send_count <= 0 )
	{
	fprintf( gpoutfile, "error writing to socket str=%s!\n", sLine );
	}
	/*
	else
	{
	fprintf( gpoutfile, "wrote %d bytes\n", send_count );
	}
	*/
	}
	else
	{
	/* for testing... */
	/fprintf( gpoutfile, sLine );/
	}
	}

	/* ************************************************** */

	enum QTOPIA_id { QTOPIA_PORT, QTOPIA_HOST, QTOPIA_OTHER };

	static struct gen_table QTOPIA_opts[] =
	{
	{ "po$rt", QTOPIA_PORT },
	{ "ho$st", QTOPIA_HOST },
	{ NULL, QTOPIA_OTHER }
	};

	TERM_PUBLIC void
	QTOPIA_options()
	{
	/* this is not for the qtopia terminal ! */
	/SendDataToSocket( "qtd options\n" );/

	int x, y;
	struct value a;

	while (!END_OF_COMMAND)
	{
	switch(lookup_table(&QTOPIA_opts[0],c_token))
	{
	case QTOPIA_PORT:
	c_token++;
	if (END_OF_COMMAND)
	int_error(c_token, "expecting port number");
	qtopia_port_no = (int) real(const_express(&a));
	break;
	case QTOPIA_HOST:
	c_token++;
	if (END_OF_COMMAND)
	int_error(c_token, "expecting host name");
	if (isstring(c_token))
	quote_str( qtopia_host_name, c_token, sizeof(qtopia_host_name) );
	else
	copy_str( qtopia_host_name, c_token, sizeof(qtopia_host_name) );
	c_token++;
	break;
	case QTOPIA_OTHER:
	default:
	break;
	}
	}

	sprintf(term_options, "host=%s port=%d",qtopia_host_name,qtopia_port_no);
	}


	TERM_PUBLIC void
	QTOPIA_init()
	{
	/* initialize lib (if necassary) */
	InitSockets();
	CheckForQtplot( 0 );
	OpenClient( 0 );

	SendDataToSocket( "qtd init\n" );
	}


	TERM_PUBLIC void
	QTOPIA_graphics()
	{
	SendDataToSocket( "qtd graphics\n" );
	}

	TERM_PUBLIC void
	QTOPIA_text()
	{
	SendDataToSocket( "qtd text\n" );
	}


	TERM_PUBLIC void
	QTOPIA_reset()
	{
	SendDataToSocket( "qtd reset\n" );

	/* give the qtplot a litle bit time to shutdown */
	MySleep(100);

	CloseClient();
	ExitSockets();
	}


	TERM_PUBLIC void
	QTOPIA_linetype(linetype)
	int linetype;
	{
	char sBuffer[QTOPIA_MAX_BUFFER];

	sprintf( sBuffer, "qtd linetype type=%d\n",linetype );

	SendDataToSocket( sBuffer );
	}


	TERM_PUBLIC void
	QTOPIA_move(x, y)
	unsigned int x, y;
	{
	char sBuffer[QTOPIA_MAX_BUFFER];

	sprintf( sBuffer, "qtd move x=%d y=%d\n",x,y );

	SendDataToSocket( sBuffer );
	}


	TERM_PUBLIC void
	QTOPIA_point(x, y, point)
	unsigned int x, y;
	int point;
	{
	char sBuffer[QTOPIA_MAX_BUFFER];

	sprintf( sBuffer, "qtd point x=%d y=%d point=%d\n",x,y,point );

	SendDataToSocket( sBuffer );
	}


	TERM_PUBLIC void
	QTOPIA_vector(_x, _y)
	unsigned int _x, _y;
	{
	char sBuffer[QTOPIA_MAX_BUFFER];

	sprintf( sBuffer, "qtd vector x=%d y=%d\n",_x,_y );

	SendDataToSocket( sBuffer );
	}


	TERM_PUBLIC void
	QTOPIA_put_text(x, y, str)
	unsigned int x, y;
	const char *str;
	{
	char sBuffer[QTOPIA_MAX_BUFFER];

	sprintf( sBuffer, "qtd put_text x=%d y=%d str=%s\n",x,y,str );

	SendDataToSocket( sBuffer );
	}

	/* not suported yet ! */
	TERM_PUBLIC void
	QTOPIA_arrow(sx, sy, ex, ey, head)
	unsigned int sx, sy, ex, ey;
	int head; /* ignored */
	{
	char sBuffer[QTOPIA_MAX_BUFFER];

	sprintf( sBuffer, "qtd arrow sx=%d sy=%d ex=%d ey=%d head=%d\n",sx,sy,ex,ey,head );

	SendDataToSocket( sBuffer );
	}


	#endif /* TERM_BODY */

	#ifdef TERM_TABLE
	TERM_TABLE_START(qtopia_driver)
	"qtopia", "qtopia or Qt",
	QTOPIA_XMAX, QTOPIA_YMAX, QTOPIA_VCHAR, QTOPIA_HCHAR,
	QTOPIA_VTIC, QTOPIA_HTIC, QTOPIA_options, QTOPIA_init, QTOPIA_reset,
	QTOPIA_text, null_scale, QTOPIA_graphics, QTOPIA_move, QTOPIA_vector,
	QTOPIA_linetype, QTOPIA_put_text, null_text_angle,
	null_justify_text, QTOPIA_point, /QTOPIA_arrow/0, set_font_null,
	0, /* pointsize */
	TERM_CAN_MULTIPLOT,
	NULL, NULL, NULL, NULL
	#ifdef USE_MOUSE
	, NULL, NULL, NULL, NULL, NULL
	#endif
	#ifdef PM3D
	, NULL, NULL, NULL, NULL
	#endif
	TERM_TABLE_END(qtopia_driver)

	#undef LAST_TERM
	#define LAST_TERM qtopia_driver

	#endif /* TERM_TABLE */

	#ifdef TERM_HELP
	START_HELP(qtopia)
	"1 qtopia",
	"?commands set terminal qtopia",
	"?set terminal qtopia",
	"?set term qtopia",
	"?terminal qtopia",
	"?term qtopia",
	"?qtopia",
	" The `qtopia` terminal driver has no additional options.",
	"",
	" Syntax:",
	" set terminal qtopia",
	""
	END_HELP(qtopia)
	#endif /* TERM_HELP */