import-layers/meta-openembedded/meta-oe/recipes-support/edac-utils/files/make-init-script-be-able-to-automatically-load-EDAC-.patch

make init script be able to automatically load EDAC module.

Upstream-Status: Inappropriate [embedded specific]

Signed-off-by: Roy.Li <rongqing.li@windriver.com>
---
 src/etc/edac.init.in |   49 +++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 47 insertions(+), 2 deletions(-)

diff --git a/src/etc/edac.init.in b/src/etc/edac.init.in
index 7a51da9..5b568c4 100644
--- a/src/etc/edac.init.in
+++ b/src/etc/edac.init.in
@@ -42,7 +42,6 @@ for dir in "$sysconfdir/default" "$sysconfdir/sysconfig"; do
   [ -f "$dir/$SERVICE" ] && . "$dir/$SERVICE"
 done
 
-
 ###############################################################################
 
 service_start ()
@@ -52,6 +51,46 @@ service_start ()
 # Assume that if EDAC_DRIVER is not set, then EDAC is configured
 #  automatically, thus return successfully, but don't do anything.
 #
+    if [ ! -f /etc/edac/edac-driver ]; then
+         [ -d /sys/bus/edac/devices/mc/mc0 ] && \
+         echo `lsmod | grep _edac | cut -d" " -f1` > /etc/edac/edac-driver
+    fi
+
+    [ -f /etc/edac/edac-driver ] && EDAC_DRIVER=`cat /etc/edac/edac-driver`
+
+    if [ -z "$EDAC_DRIVER" ]; then
+
+        DRIVER_PATH=/lib/modules/`uname -r`/kernel/drivers/edac
+        oldpath=`pwd`
+        if [ -d $DRIVER_PATH ]; then
+
+            cd $DRIVER_PATH
+
+            for i in $(/bin/ls | /usr/bin/cut -d. -f1) ; do
+                /sbin/modprobe $i 2>/dev/null
+                if [ -d /sys/bus/edac/devices/mc/mc0 ]; then
+                    echo $i> /etc/edac/edac-driver
+                    EDAC_DRIVER=$i
+                    break
+                fi
+                /sbin/modprobe -r $i 2>/dev/null
+            done
+
+            cd "$oldpath"
+
+
+            if [ -z "$EDAC_DRIVER" ]; then
+                echo "This board may not support EDAC, or EDAC module may not be compiled in"
+                exit
+            fi
+
+        else
+            echo "This board may not support EDAC, or EDAC module may not be compiled in"
+            exit
+        fi
+
+    fi
+
   if [ -n "$EDAC_DRIVER" ]; then
      echo -n "Starting ${SERVICE}: "
      modprobe $EDAC_DRIVER
@@ -76,12 +115,15 @@ service_start ()
 service_stop ()
 {
   echo -n "Disabling ${SERVICE}: "
+
+  [ -f /etc/edac/edac-driver ] && EDAC_DRIVER=`cat /etc/edac/edac-driver`
+
   if [ -n "$EDAC_DRIVER" ]; then
     modprobe -r $EDAC_DRIVER
     STATUS=$?
     [ $STATUS -eq 0 ] && echo success || echo failure
   else
-    echo "Not supported for this configuration."
+    echo "Not supported for this configuration, or EDAC Module is not loaded."
     STATUS=6
   fi
 }
@@ -92,6 +134,9 @@ service_status ()
 {
 # Print the current status of the service.  Required by LSB.
 #
+  [ -f /etc/edac/edac-driver ] && EDAC_DRIVER=`cat /etc/edac/edac-driver`
+  [ -z "$EDAC_DRIVER" ] && STATUS=1 && exit
+
   edac-ctl --status
   STATUS=0
 }
-- 
1.7.10.4