blob: 5da03a890dcdc6dc83e9bb318c6a193bb5ff080e [file] [log] [blame]
<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"
[<!ENTITY % poky SYSTEM "../poky.ent"> %poky; ] >
<article id='brief-yocto-project-qs-intro'>
<articleinfo>
<title>Yocto Project Quick Build</title>
<copyright>
<year>&COPYRIGHT_YEAR;</year>
<holder>Linux Foundation</holder>
</copyright>
<legalnotice>
<para>
Permission is granted to copy, distribute and/or modify this document under
the terms of the <ulink type="http" url="http://creativecommons.org/licenses/by-sa/2.0/uk/">Creative Commons Attribution-Share Alike 2.0 UK: England &amp; Wales</ulink> as published by Creative Commons.
</para>
</legalnotice>
<abstract>
<imagedata fileref="figures/yocto-project-transp.png"
width="6in" depth="1in"
align="right" scale="25" />
</abstract>
</articleinfo>
<section id='brief-welcome'>
<title>Welcome!</title>
<para>
Welcome!
This short document steps you through the process for a typical
image build using the Yocto Project.
The document also introduces how to configure a build for specific
hardware.
You will use Yocto Project to build a reference embedded OS
called Poky.
<note><title>Notes</title>
<itemizedlist>
<listitem><para>
The examples in this paper assume you are using a
native Linux system running a recent Ubuntu Linux
distribution.
If the machine you want to use Yocto Project on to
build an image
(<ulink url='&YOCTO_DOCS_REF_URL;#hardware-build-system-term'>build host</ulink>)
is not a native Linux system, you can
still perform these steps by using CROss PlatformS
(CROPS) and setting up a Poky container.
See the
<ulink url='&YOCTO_DOCS_DEV_URL;#setting-up-to-use-crops'>Setting Up to Use CROss PlatformS (CROPS)</ulink>"
section in the Yocto Project Development Tasks Manual for more
information.
</para></listitem>
<listitem><para>
You cannot use a build host that is using the
<ulink url='https://en.wikipedia.org/wiki/Windows_Subsystem_for_Linux'>Windows Subsystem for Linux</ulink>
(WSL).
The Yocto Project is not compatible with WSL.
</para></listitem>
</itemizedlist>
</note>
</para>
<para>
If you want more conceptual or background information on the
Yocto Project, see the
<ulink url='&YOCTO_DOCS_OM_URL;'>Yocto Project Overview and Concepts Manual</ulink>.
</para>
</section>
<section id='brief-compatible-distro'>
<title>Compatible Linux Distribution</title>
<para>
Make sure your
<ulink url='&YOCTO_DOCS_REF_URL;#hardware-build-system-term'>build host</ulink>
meets the following requirements:
<itemizedlist>
<listitem><para>
50 Gbytes of free disk space
</para></listitem>
<listitem><para>
Runs a supported Linux distribution (i.e. recent releases of
Fedora, openSUSE, CentOS, Debian, or Ubuntu). For a list of
Linux distributions that support the Yocto Project, see the
"<ulink url='&YOCTO_DOCS_REF_URL;#detailed-supported-distros'>Supported Linux Distributions</ulink>"
section in the Yocto Project Reference Manual.
For detailed information on preparing your build host, see
the
"<ulink url='&YOCTO_DOCS_DEV_URL;#dev-preparing-the-build-host'>Preparing the Build Host</ulink>"
section in the Yocto Project Development Tasks Manual.
</para></listitem>
<listitem><para>
<itemizedlist>
<listitem><para>
Git 1.8.3.1 or greater
</para></listitem>
<listitem><para>
tar 1.27 or greater
</para></listitem>
<listitem><para>
Python 3.4.0 or greater.
</para></listitem>
</itemizedlist>
If your build host does not meet any of these three listed
version requirements, you can take steps to prepare the
system so that you can still use the Yocto Project.
See the
"<ulink url='&YOCTO_DOCS_REF_URL;#required-git-tar-and-python-versions'>Required Git, tar, and Python Versions</ulink>"
section in the Yocto Project Reference Manual for information.
</para></listitem>
</itemizedlist>
</para>
</section>
<section id='brief-build-system-packages'>
<title>Build Host Packages</title>
<para>
You must install essential host packages on your
build host.
The following command installs the host packages based on an
Ubuntu distribution:
<note>
For host package requirements on all supported Linux
distributions, see the
"<ulink url='&YOCTO_DOCS_REF_URL;#required-packages-for-the-build-host'>Required Packages for the Build Host</ulink>"
section in the Yocto Project Reference Manual.
</note>
<literallayout class='monospaced'>
$ sudo apt-get install &UBUNTU_HOST_PACKAGES_ESSENTIAL; libsdl1.2-dev xterm
</literallayout>
</para>
</section>
<section id='brief-use-git-to-clone-poky'>
<title>Use Git to Clone Poky</title>
<para>
Once you complete the setup instructions for your machine,
you need to get a copy of the Poky repository on your build
host.
Use the following commands to clone the Poky
repository.
<literallayout class='monospaced'>
$ git clone git://git.yoctoproject.org/poky
Cloning into 'poky'...
remote: Counting objects: 428632, done.
remote: Compressing objects: 100% (101203/101203), done.
remote: Total 428632 (delta 320463), reused 428532 (delta 320363)
Receiving objects: 100% (428632/428632), 153.01 MiB | 12.40 MiB/s, done.
Resolving deltas: 100% (320463/320463), done.
Checking connectivity... done.
</literallayout>
Move to the <filename>poky</filename> directory and take a look
at the tags:
<literallayout class='monospaced'>
$ cd poky
$ git fetch --tags
$ git tag
1.1_M1.final
1.1_M1.rc1
1.1_M1.rc2
1.1_M2.final
1.1_M2.rc1
.
.
.
yocto-2.5
yocto-2.5.1
yocto-2.5.2
yocto-2.6
yocto-2.6.1
yocto_1.5_M5.rc8
</literallayout>
For this example, check out the branch based on the
&DISTRO_REL_TAG; release:
<literallayout class='monospaced'>
$ git checkout tags/&DISTRO_REL_TAG; -b my-&DISTRO_REL_TAG;
Switched to a new branch 'my-&DISTRO_REL_TAG;'
</literallayout>
The previous Git checkout command creates a local branch
named my-&DISTRO_REL_TAG;. The files available to you in that
branch exactly match the repository's files in the
"&DISTRO_NAME_NO_CAP;" development branch at the time of the
Yocto Project &DISTRO_REL_TAG; release.
</para>
<para>
For more options and information about accessing Yocto
Project related repositories, see the
"<ulink url='&YOCTO_DOCS_DEV_URL;#locating-yocto-project-source-files'>Locating Yocto Project Source Files</ulink>"
section in the Yocto Project Development Tasks Manual.
</para>
</section>
<section id='brief-building-your-image'>
<title>Building Your Image</title>
<para>
Use the following steps to build your image.
The build process creates an entire Linux distribution, including
the toolchain, from source.
<note>
<itemizedlist>
<listitem><para>
If you are working behind a firewall and your build
host is not set up for proxies, you could encounter
problems with the build process when fetching source
code (e.g. fetcher failures or Git failures).
</para></listitem>
<listitem><para>
If you do not know your proxy settings, consult your
local network infrastructure resources and get that
information.
A good starting point could also be to check your
web browser settings.
Finally, you can find more information on the
"<ulink url='https://wiki.yoctoproject.org/wiki/Working_Behind_a_Network_Proxy'>Working Behind a Network Proxy</ulink>"
page of the Yocto Project Wiki.
</para></listitem>
</itemizedlist>
</note>
</para>
<para>
<orderedlist>
<listitem><para>
<emphasis>Initialize the Build Environment:</emphasis>
From within the <filename>poky</filename> directory, run the
<ulink url='&YOCTO_DOCS_REF_URL;#structure-core-script'><filename>&OE_INIT_FILE;</filename></ulink>
environment setup script to define Yocto Project's
build environment on your build host.
<literallayout class='monospaced'>
$ cd ~/poky
$ source &OE_INIT_FILE;
You had no conf/local.conf file. This configuration file has therefore been
created for you with some default values. You may wish to edit it to, for
example, select a different MACHINE (target hardware). See conf/local.conf
for more information as common configuration options are commented.
You had no conf/bblayers.conf file. This configuration file has therefore been
created for you with some default values. To add additional metadata layers
into your configuration please add entries to conf/bblayers.conf.
The Yocto Project has extensive documentation about OE including a reference
manual which can be found at:
http://yoctoproject.org/documentation
For more information about OpenEmbedded see their website:
http://www.openembedded.org/
### Shell environment set up for builds. ###
You can now run 'bitbake &lt;target&gt;'
Common targets are:
core-image-minimal
core-image-sato
meta-toolchain
meta-ide-support
You can also run generated qemu images with a command like 'runqemu qemux86'
</literallayout>
Among other things, the script creates the
<ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>,
which is <filename>build</filename> in this case
and is located in the
<ulink url='&YOCTO_DOCS_REF_URL;#source-directory'>Source Directory</ulink>.
After the script runs, your current working directory
is set to the Build Directory.
Later, when the build completes, the Build Directory
contains all the files created during the build.
</para></listitem>
<listitem><para id='conf-file-step'>
<emphasis>Examine Your Local Configuration File:</emphasis>
When you set up the build environment, a local
configuration file named
<filename>local.conf</filename> becomes available in
a <filename>conf</filename> subdirectory of the
Build Directory.
For this example, the defaults are set to build
for a <filename>qemux86</filename> target, which is
suitable for emulation.
The package manager used is set to the RPM package
manager.
<tip>
You can significantly speed up your build and guard
against fetcher failures by using mirrors.
To use mirrors, add these lines to your
<filename>local.conf</filename> file in the Build
directory:
<literallayout class='monospaced'>
SSTATE_MIRRORS = "\
file://.* http://sstate.yoctoproject.org/dev/PATH;downloadfilename=PATH \n \
file://.* http://sstate.yoctoproject.org/&YOCTO_DOC_VERSION_MINUS_ONE;/PATH;downloadfilename=PATH \n \
file://.* http://sstate.yoctoproject.org/&YOCTO_DOC_VERSION;/PATH;downloadfilename=PATH \n \
"
</literallayout>
The previous examples showed how to add sstate
paths for Yocto Project &YOCTO_DOC_VERSION_MINUS_ONE;,
&YOCTO_DOC_VERSION;, and a development area.
For a complete index of sstate locations, see
<ulink url='http://sstate.yoctoproject.org/'></ulink>.
</tip>
</para></listitem>
<listitem><para>
<emphasis>Start the Build:</emphasis>
Continue with the following command to build an OS image
for the target, which is
<filename>core-image-sato</filename> in this example:
<literallayout class='monospaced'>
$ bitbake core-image-sato
</literallayout>
For information on using the
<filename>bitbake</filename> command, see the
"<ulink url='&YOCTO_DOCS_OM_URL;#usingpoky-components-bitbake'>BitBake</ulink>"
section in the Yocto Project Overview and Concepts Manual,
or see the
"<ulink url='&YOCTO_DOCS_BB_URL;#bitbake-user-manual-command'>BitBake Command</ulink>"
section in the BitBake User Manual.
</para></listitem>
<listitem><para>
<emphasis>Simulate Your Image Using QEMU:</emphasis>
Once this particular image is built, you can start
QEMU, which is a Quick EMUlator that ships with
the Yocto Project:
<literallayout class='monospaced'>
$ runqemu qemux86
</literallayout>
If you want to learn more about running QEMU, see the
"<ulink url="&YOCTO_DOCS_DEV_URL;#dev-manual-qemu">Using the Quick EMUlator (QEMU)</ulink>"
chapter in the Yocto Project Development Tasks Manual.
</para></listitem>
<listitem><para>
<emphasis>Exit QEMU:</emphasis>
Exit QEMU by either clicking on the shutdown icon or by
typing <filename>Ctrl-C</filename> in the QEMU
transcript window from which you evoked QEMU.
</para></listitem>
</orderedlist>
</para>
</section>
<section id='customizing-your-build-for-specific-hardware'>
<title>Customizing Your Build for Specific Hardware</title>
<para>
So far, all you have done is quickly built an image suitable
for emulation only.
This section shows you how to customize your build for specific
hardware by adding a hardware layer into the Yocto Project
development environment.
</para>
<para>
In general, layers are repositories that contain related sets of
instructions and configurations that tell the Yocto Project what
to do.
Isolating related metadata into functionally specific layers
facilitates modular development and makes it easier to reuse the
layer metadata.
<note>
By convention, layer names start with the string "meta-".
</note>
</para>
<para>
Follow these steps to add a hardware layer:
<orderedlist>
<listitem><para>
<emphasis>Find a Layer:</emphasis>
Lots of hardware layers exist.
The Yocto Project
<ulink url='&YOCTO_GIT_URL;'>Source Repositories</ulink>
has many hardware layers.
This example adds the
<ulink url='https://github.com/kraj/meta-altera'>meta-altera</ulink>
hardware layer.
</para></listitem>
<listitem><para>
<emphasis>Clone the Layer</emphasis>
Use Git to make a local copy of the layer on your machine.
You can put the copy in the top level of the copy of the
Poky repository created earlier:
<literallayout class='monospaced'>
$ cd ~/poky
$ git clone https://github.com/kraj/meta-altera.git
Cloning into 'meta-altera'...
remote: Counting objects: 25170, done.
remote: Compressing objects: 100% (350/350), done.
remote: Total 25170 (delta 645), reused 719 (delta 538), pack-reused 24219
Receiving objects: 100% (25170/25170), 41.02 MiB | 1.64 MiB/s, done.
Resolving deltas: 100% (13385/13385), done.
Checking connectivity... done.
</literallayout>
The hardware layer now exists with other layers inside
the Poky reference repository on your build host as
<filename>meta-altera</filename> and contains all the
metadata needed to support hardware from Altera, which
is owned by Intel.
</para></listitem>
<listitem><para>
<emphasis>Change the Configuration to Build for a Specific Machine:</emphasis>
The
<ulink url='&YOCTO_DOCS_REF_URL;#var-MACHINE'><filename>MACHINE</filename></ulink>
variable in the <filename>local.conf</filename> file
specifies the machine for the build.
For this example, set the <filename>MACHINE</filename>
variable to "cyclone5".
These configurations are used:
<ulink url='https://github.com/kraj/meta-altera/blob/master/conf/machine/cyclone5.conf'></ulink>.
<note>
See the
"<link linkend='conf-file-step'>Examine Your Local Configuration File</link>"
step earlier for more information on configuring the
build.
</note>
</para></listitem>
<listitem><para>
<emphasis>Add Your Layer to the Layer Configuration File:</emphasis>
Before you can use a layer during a build, you must add it
to your <filename>bblayers.conf</filename> file, which
is found in the
<ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory's</ulink>
<filename>conf</filename> directory.</para>
<para>Use the <filename>bitbake-layers add-layer</filename>
command to add the layer to the configuration file:
<literallayout class='monospaced'>
$ cd ~/poky/build
$ bitbake-layers add-layer ../meta-altera
NOTE: Starting bitbake server...
Parsing recipes: 100% |##################################################################| Time: 0:00:32
Parsing of 918 .bb files complete (0 cached, 918 parsed). 1401 targets, 123 skipped, 0 masked, 0 errors.
</literallayout>
You can find more information on adding layers in the
"<ulink url='&YOCTO_DOCS_DEV_URL;#adding-a-layer-using-the-bitbake-layers-script'>Adding a Layer Using the <filename>bitbake-layers</filename> Script</ulink>"
section.
</para></listitem>
</orderedlist>
Completing these steps has added the
<filename>meta-altera</filename> layer to your Yocto Project
development environment and configured it to build for the
"cyclone5" machine.
<note>
The previous steps are for demonstration purposes only.
If you were to attempt to build an image for the
"cyclone5" build, you should read the Altera
<filename>README</filename>.
</note>
</para>
</section>
<section id='creating-your-own-general-layer'>
<title>Creating Your Own General Layer</title>
<para>
Maybe you have an application or specific set of behaviors you
need to isolate.
You can create your own general layer using the
<filename>bitbake-layers create-layer</filename> command.
The tool automates layer creation by setting up a
subdirectory with a <filename>layer.conf</filename>
configuration file, a <filename>recipes-example</filename>
subdirectory that contains an <filename>example.bb</filename>
recipe, a licensing file, and a <filename>README</filename>.
</para>
<para>
The following commands run the tool to create a layer named
<filename>meta-mylayer</filename> in the
<filename>poky</filename> directory:
<literallayout class='monospaced'>
$ cd ~/poky
$ bitbake-layers create-layer meta-mylayer
NOTE: Starting bitbake server...
Add your new layer with 'bitbake-layers add-layer meta-mylayer'
</literallayout>
For more information on layers and how to create them, see the
"<ulink url='&YOCTO_DOCS_DEV_URL;#creating-a-general-layer-using-the-bitbake-layers-script'>Creating a General Layer Using the <filename>bitbake-layers</filename> Script</ulink>"
section in the Yocto Project Development Tasks Manual.
</para>
</section>
<section id='brief-where-to-go-next'>
<title>Where To Go Next</title>
<para>
Now that you have experienced using the Yocto Project, you might
be asking yourself "What now?"
The Yocto Project has many sources of information including
the website, wiki pages, and user manuals:
<itemizedlist>
<listitem><para>
<emphasis>Website:</emphasis>
The
<ulink url='&YOCTO_HOME_URL;'>Yocto Project Website</ulink>
provides background information, the latest builds,
breaking news, full development documentation, and
access to a rich Yocto Project Development Community
into which you can tap.
</para></listitem>
<listitem><para>
<emphasis>Developer Screencast:</emphasis>
The
<ulink url='http://vimeo.com/36450321'>Getting Started with the Yocto Project - New Developer Screencast Tutorial</ulink>
provides a 30-minute video created for users unfamiliar
with the Yocto Project but familiar with Linux build
hosts.
While this screencast is somewhat dated, the
introductory and fundamental concepts are useful for
the beginner.
</para></listitem>
<listitem><para>
<emphasis>Yocto Project Overview and Concepts Manual:</emphasis>
The
<ulink url='&YOCTO_DOCS_OM_URL;'>Yocto Project Overview and Concepts Manual</ulink>
is a great place to start to learn about the
Yocto Project.
This manual introduces you to the Yocto Project and its
development environment.
The manual also provides conceptual information for
various aspects of the Yocto Project.
</para></listitem>
<listitem><para>
<emphasis>Yocto Project Wiki:</emphasis>
The
<ulink url='&YOCTO_WIKI_URL;'>Yocto Project Wiki</ulink>
provides additional information on where to go next
when ramping up with the Yocto Project, release
information, project planning, and QA information.
</para></listitem>
<listitem><para>
<emphasis>Yocto Project Mailing Lists:</emphasis>
Related mailing lists provide a forum for discussion,
patch submission and announcements.
Several mailing lists exist and are grouped according
to areas of concern.
See the
"<ulink url='&YOCTO_DOCS_REF_URL;#resources-mailinglist'>Mailing lists</ulink>"
section in the Yocto Project Reference Manual for a
complete list of Yocto Project mailing lists.
</para></listitem>
<listitem><para>
<emphasis>Comprehensive List of Links and Other Documentation:</emphasis>
The
"<ulink url='&YOCTO_DOCS_REF_URL;#resources-links-and-related-documentation'>Links and Related Documentation</ulink>"
section in the Yocto Project Reference Manual provides a
comprehensive list of all related links and other
user documentation.
</para></listitem>
</itemizedlist>
</para>
</section>
</article>
<!--
vim: expandtab tw=80 ts=4
-->