blob: 521271d54cc74b009b442d53aea657ed955a24d1 [file] [log] [blame]
<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"
[<!ENTITY % poky SYSTEM "../poky.ent"> %poky; ] >
<chapter id='sdk-working-projects'>
<title>Using the SDK Toolchain Directly</title>
<para>
You can use the SDK toolchain directly with Makefile and
Autotools-based projects.
</para>
<section id='autotools-based-projects'>
<title>Autotools-Based Projects</title>
<para>
Once you have a suitable
<ulink url='&YOCTO_DOCS_REF_URL;#cross-development-toolchain'>cross-development toolchain</ulink>
installed, it is very easy to develop a project using the
<ulink url='https://en.wikipedia.org/wiki/GNU_Build_System'>GNU Autotools-based</ulink>
workflow, which is outside of the
<ulink url='&YOCTO_DOCS_REF_URL;#build-system-term'>OpenEmbedded build system</ulink>.
</para>
<para>
The following figure presents a simple Autotools workflow.
<imagedata fileref="figures/sdk-autotools-flow.png" width="7in" height="8in" align="center" />
</para>
<para>
Follow these steps to create a simple Autotools-based
"Hello World" project:
<note>
For more information on the GNU Autotools workflow,
see the same example on the
<ulink url='https://developer.gnome.org/anjuta-build-tutorial/stable/create-autotools.html.en'>GNOME Developer</ulink>
site.
</note>
<orderedlist>
<listitem><para>
<emphasis>Create a Working Directory and Populate It:</emphasis>
Create a clean directory for your project and then make
that directory your working location.
<literallayout class='monospaced'>
$ mkdir $HOME/helloworld
$ cd $HOME/helloworld
</literallayout>
After setting up the directory, populate it with files
needed for the flow.
You need a project source file, a file to help with
configuration, and a file to help create the Makefile,
and a README file:
<filename>hello.c</filename>,
<filename>configure.ac</filename>,
<filename>Makefile.am</filename>, and
<filename>README</filename>, respectively.</para>
<para> Use the following command to create an empty README
file, which is required by GNU Coding Standards:
<literallayout class='monospaced'>
$ touch README
</literallayout>
Create the remaining three files as follows:
<itemizedlist>
<listitem><para>
<emphasis><filename>hello.c</filename>:</emphasis>
<literallayout class='monospaced'>
#include &lt;stdio.h&gt;
main()
{
printf("Hello World!\n");
}
</literallayout>
</para></listitem>
<listitem><para>
<emphasis><filename>configure.ac</filename>:</emphasis>
<literallayout class='monospaced'>
AC_INIT(hello,0.1)
AM_INIT_AUTOMAKE([foreign])
AC_PROG_CC
AC_CONFIG_FILES(Makefile)
AC_OUTPUT
</literallayout>
</para></listitem>
<listitem><para>
<emphasis><filename>Makefile.am</filename>:</emphasis>
<literallayout class='monospaced'>
bin_PROGRAMS = hello
hello_SOURCES = hello.c
</literallayout>
</para></listitem>
</itemizedlist>
</para></listitem>
<listitem><para>
<emphasis>Source the Cross-Toolchain
Environment Setup File:</emphasis>
As described earlier in the manual, installing the
cross-toolchain creates a cross-toolchain
environment setup script in the directory that the SDK
was installed.
Before you can use the tools to develop your project,
you must source this setup script.
The script begins with the string "environment-setup"
and contains the machine architecture, which is
followed by the string "poky-linux".
For this example, the command sources a script from the
default SDK installation directory that uses the
32-bit Intel x86 Architecture and the
&DISTRO_NAME; Yocto Project release:
<literallayout class='monospaced'>
$ source /opt/poky/&DISTRO;/environment-setup-i586-poky-linux
</literallayout>
</para></listitem>
<listitem><para>
<emphasis>Create the <filename>configure</filename> Script:</emphasis>
Use the <filename>autoreconf</filename> command to
generate the <filename>configure</filename> script.
<literallayout class='monospaced'>
$ autoreconf
</literallayout>
The <filename>autoreconf</filename> tool takes care
of running the other Autotools such as
<filename>aclocal</filename>,
<filename>autoconf</filename>, and
<filename>automake</filename>.
<note>
If you get errors from
<filename>configure.ac</filename>, which
<filename>autoreconf</filename> runs, that indicate
missing files, you can use the "-i" option, which
ensures missing auxiliary files are copied to the build
host.
</note>
</para></listitem>
<listitem><para>
<emphasis>Cross-Compile the Project:</emphasis>
This command compiles the project using the
cross-compiler.
The
<ulink url='&YOCTO_DOCS_REF_URL;#var-CONFIGURE_FLAGS'><filename>CONFIGURE_FLAGS</filename></ulink>
environment variable provides the minimal arguments for
GNU configure:
<literallayout class='monospaced'>
$ ./configure ${CONFIGURE_FLAGS}
</literallayout>
For an Autotools-based project, you can use the
cross-toolchain by just passing the appropriate host
option to <filename>configure.sh</filename>.
The host option you use is derived from the name of the
environment setup script found in the directory in which
you installed the cross-toolchain.
For example, the host option for an ARM-based target that
uses the GNU EABI is
<filename>armv5te-poky-linux-gnueabi</filename>.
You will notice that the name of the script is
<filename>environment-setup-armv5te-poky-linux-gnueabi</filename>.
Thus, the following command works to update your project
and rebuild it using the appropriate cross-toolchain tools:
<literallayout class='monospaced'>
$ ./configure --host=armv5te-poky-linux-gnueabi --with-libtool-sysroot=<replaceable>sysroot_dir</replaceable>
</literallayout>
</para></listitem>
<listitem><para>
<emphasis>Make and Install the Project:</emphasis>
These two commands generate and install the project
into the destination directory:
<literallayout class='monospaced'>
$ make
$ make install DESTDIR=./tmp
</literallayout>
<note>
To learn about environment variables established
when you run the cross-toolchain environment setup
script and how they are used or overridden when
the Makefile, see the
"<link linkend='makefile-based-projects'>Makefile-Based Projects</link>"
section.
</note>
This next command is a simple way to verify the
installation of your project.
Running the command prints the architecture on which
the binary file can run.
This architecture should be the same architecture that
the installed cross-toolchain supports.
<literallayout class='monospaced'>
$ file ./tmp/usr/local/bin/hello
</literallayout>
</para></listitem>
<listitem><para>
<emphasis>Execute Your Project:</emphasis>
To execute the project, you would need to run it on your
target hardware.
If your target hardware happens to be your build host,
you could run the project as follows:
<literallayout class='monospaced'>
$ ./tmp/usr/local/bin/hello
</literallayout>
As expected, the project displays the "Hello World!"
message.
</para></listitem>
</orderedlist>
</para>
</section>
<section id='makefile-based-projects'>
<title>Makefile-Based Projects</title>
<para>
Simple Makefile-based projects use and interact with the
cross-toolchain environment variables established when you run
the cross-toolchain environment setup script.
The environment variables are subject to general
<filename>make</filename> rules.
</para>
<para>
This section presents a simple Makefile development flow and
provides an example that lets you see how you can use
cross-toolchain environment variables and Makefile variables
during development.
<imagedata fileref="figures/sdk-makefile-flow.png" width="6in" height="7in" align="center" />
</para>
<para>
The main point of this section is to explain the following three
cases regarding variable behavior:
<itemizedlist>
<listitem><para>
<emphasis>Case 1 - No Variables Set in the
<filename>Makefile</filename> Map to Equivalent
Environment Variables Set in the SDK Setup Script:</emphasis>
Because matching variables are not specifically set in the
<filename>Makefile</filename>, the variables retain their
values based on the environment setup script.
</para></listitem>
<listitem><para>
<emphasis>Case 2 - Variables Are Set in the Makefile that
Map to Equivalent Environment Variables from the SDK
Setup Script:</emphasis>
Specifically setting matching variables in the
<filename>Makefile</filename> during the build results in
the environment settings of the variables being
overwritten.
In this case, the variables you set in the
<filename>Makefile</filename> are used.
</para></listitem>
<listitem><para>
<emphasis>Case 3 - Variables Are Set Using the Command Line
that Map to Equivalent Environment Variables from the
SDK Setup Script:</emphasis>
Executing the <filename>Makefile</filename> from the
command line results in the environment variables being
overwritten.
In this case, the command-line content is used.
</para></listitem>
</itemizedlist>
<note>
Regardless of how you set your variables, if you use
the "-e" option with <filename>make</filename>, the
variables from the SDK setup script take precedence:
<literallayout class='monospaced'>
$ make -e <replaceable>target</replaceable>
</literallayout>
</note>
</para>
<para>
The remainder of this section presents a simple Makefile example
that demonstrates these variable behaviors.
</para>
<para>
In a new shell environment variables are not established for the
SDK until you run the setup script.
For example, the following commands show a null value for the
compiler variable (i.e.
<ulink url='&YOCTO_DOCS_REF_URL;#var-CC'><filename>CC</filename></ulink>).
<literallayout class='monospaced'>
$ echo ${CC}
$
</literallayout>
Running the SDK setup script for a 64-bit build host and an
i586-tuned target architecture for a
<filename>core-image-sato</filename> image using the current
&DISTRO; Yocto Project release and then echoing that variable
shows the value established through the script:
<literallayout class='monospaced'>
$ source /opt/poky/&DISTRO;/environment-setup-i586-poky-linux
$ echo ${CC}
i586-poky-linux-gcc -m32 -march=i586 --sysroot=/opt/poky/2.5/sysroots/i586-poky-linux
</literallayout>
</para>
<para>
To illustrate variable use, work through this simple "Hello World!"
example:
<orderedlist>
<listitem><para>
<emphasis>Create a Working Directory and Populate It:</emphasis>
Create a clean directory for your project and then make
that directory your working location.
<literallayout class='monospaced'>
$ mkdir $HOME/helloworld
$ cd $HOME/helloworld
</literallayout>
After setting up the directory, populate it with files
needed for the flow.
You need a <filename>main.c</filename> file from which you
call your function, a <filename>module.h</filename> file
to contain headers, and a <filename>module.c</filename>
that defines your function.
</para>
<para>Create the three files as follows:
<itemizedlist>
<listitem><para>
<emphasis><filename>main.c</filename>:</emphasis>
<literallayout class='monospaced'>
#include "module.h"
void sample_func();
int main()
{
sample_func();
return 0;
}
</literallayout>
</para></listitem>
<listitem><para>
<emphasis><filename>module.h</filename>:</emphasis>
<literallayout class='monospaced'>
#include &lt;stdio.h&gt;
void sample_func();
</literallayout>
</para></listitem>
<listitem><para>
<emphasis><filename>module.c</filename>:</emphasis>
<literallayout class='monospaced'>
#include "module.h"
void sample_func()
{
printf("Hello World!");
printf("\n");
}
</literallayout>
</para></listitem>
</itemizedlist>
</para></listitem>
<listitem><para>
<emphasis>Source the Cross-Toolchain Environment Setup File:</emphasis>
As described earlier in the manual, installing the
cross-toolchain creates a cross-toolchain environment setup
script in the directory that the SDK was installed.
Before you can use the tools to develop your project,
you must source this setup script.
The script begins with the string "environment-setup"
and contains the machine architecture, which is
followed by the string "poky-linux".
For this example, the command sources a script from the
default SDK installation directory that uses the
32-bit Intel x86 Architecture and the
&DISTRO_NAME; Yocto Project release:
<literallayout class='monospaced'>
$ source /opt/poky/&DISTRO;/environment-setup-i586-poky-linux
</literallayout>
</para></listitem>
<listitem><para>
<emphasis>Create the <filename>Makefile</filename>:</emphasis>
For this example, the Makefile contains two lines that
can be used to set the <filename>CC</filename> variable.
One line is identical to the value that is set when you
run the SDK environment setup script, and the other line
sets <filename>CC</filename> to "gcc", the default GNU
compiler on the build host:
<literallayout class='monospaced'>
# CC=i586-poky-linux-gcc -m32 -march=i586 --sysroot=/opt/poky/2.5/sysroots/i586-poky-linux
# CC="gcc"
all: main.o module.o
${CC} main.o module.o -o target_bin
main.o: main.c module.h
${CC} -I . -c main.c
module.o: module.c module.h
${CC} -I . -c module.c
clean:
rm -rf *.o
rm target_bin
</literallayout>
</para></listitem>
<listitem><para>
<emphasis>Make the Project:</emphasis>
Use the <filename>make</filename> command to create the
binary output file.
Because variables are commented out in the Makefile,
the value used for <filename>CC</filename> is the value
set when the SDK environment setup file was run:
<literallayout class='monospaced'>
$ make
i586-poky-linux-gcc -m32 -march=i586 --sysroot=/opt/poky/2.5/sysroots/i586-poky-linux -I . -c main.c
i586-poky-linux-gcc -m32 -march=i586 --sysroot=/opt/poky/2.5/sysroots/i586-poky-linux -I . -c module.c
i586-poky-linux-gcc -m32 -march=i586 --sysroot=/opt/poky/2.5/sysroots/i586-poky-linux main.o module.o -o target_bin
</literallayout>
From the results of the previous command, you can see that
the compiler used was the compiler established through
the <filename>CC</filename> variable defined in the
setup script.</para>
<para>You can override the <filename>CC</filename>
environment variable with the same variable as set from
the Makefile by uncommenting the line in the Makefile
and running <filename>make</filename> again.
<literallayout class='monospaced'>
$ make clean
rm -rf *.o
rm target_bin
#
# Edit the Makefile by uncommenting the line that sets CC to "gcc"
#
$ make
gcc -I . -c main.c
gcc -I . -c module.c
gcc main.o module.o -o target_bin
</literallayout>
As shown in the previous example, the cross-toolchain
compiler is not used.
Rather, the default compiler is used.</para>
<para>This next case shows how to override a variable
by providing the variable as part of the command line.
Go into the Makefile and re-insert the comment character
so that running <filename>make</filename> uses
the established SDK compiler.
However, when you run <filename>make</filename>, use a
command-line argument to set <filename>CC</filename>
to "gcc":
<literallayout class='monospaced'>
$ make clean
rm -rf *.o
rm target_bin
#
# Edit the Makefile to comment out the line setting CC to "gcc"
#
$ make
i586-poky-linux-gcc -m32 -march=i586 --sysroot=/opt/poky/2.5/sysroots/i586-poky-linux -I . -c main.c
i586-poky-linux-gcc -m32 -march=i586 --sysroot=/opt/poky/2.5/sysroots/i586-poky-linux -I . -c module.c
i586-poky-linux-gcc -m32 -march=i586 --sysroot=/opt/poky/2.5/sysroots/i586-poky-linux main.o module.o -o target_bin
$ make clean
rm -rf *.o
rm target_bin
$ make CC="gcc"
gcc -I . -c main.c
gcc -I . -c module.c
gcc main.o module.o -o target_bin
</literallayout>
In the previous case, the command-line argument overrides
the SDK environment variable.</para>
<para>In this last case, edit Makefile again to use the
"gcc" compiler but then use the "-e" option on the
<filename>make</filename> command line:
<literallayout class='monospaced'>
$ make clean
rm -rf *.o
rm target_bin
#
# Edit the Makefile to use "gcc"
#
$ make
gcc -I . -c main.c
gcc -I . -c module.c
gcc main.o module.o -o target_bin
$ make clean
rm -rf *.o
rm target_bin
$ make -e
i586-poky-linux-gcc -m32 -march=i586 --sysroot=/opt/poky/2.5/sysroots/i586-poky-linux -I . -c main.c
i586-poky-linux-gcc -m32 -march=i586 --sysroot=/opt/poky/2.5/sysroots/i586-poky-linux -I . -c module.c
i586-poky-linux-gcc -m32 -march=i586 --sysroot=/opt/poky/2.5/sysroots/i586-poky-linux main.o module.o -o target_bin
</literallayout>
In the previous case, the "-e" option forces
<filename>make</filename> to use the SDK environment
variables regardless of the values in the Makefile.
</para></listitem>
<listitem><para>
<emphasis>Execute Your Project:</emphasis>
To execute the project (i.e.
<filename>target_bin</filename>), use the following
command:
<literallayout class='monospaced'>
$ ./target_bin
Hello World!
</literallayout>
<note>
If you used the cross-toolchain compiler to build
<filename>target_bin</filename> and your build host
differs in architecture from that of the target
machine, you need to run your project on the target
device.
</note>
As expected, the project displays the "Hello World!"
message.
</para></listitem>
</orderedlist>
</para>
</section>
</chapter>
<!--
vim: expandtab tw=80 ts=4
-->