| # Load config files matching the /etc/chrony/conf.d/*.conf pattern. |
| confdir /etc/chrony/conf.d |
| |
| # Use public NTP servers from the pool.ntp.org project. |
| # Please consider joining the pool project if possible by running your own |
| # server(s). |
| # If you are a vendor distributing a product using chrony, you *MUST* |
| # read and comply with http://www.pool.ntp.org/vendors.html |
| pool 0.openembedded.pool.ntp.org iburst |
| |
| # Use a local timeserver in preference to the pool, if it's reachable. |
| #server 192.168.22.22 iburst minpoll 2 prefer |
| |
| # Sync to pulse-per-second from an onboard GPS. |
| #refclock PPS /dev/pps0 poll 0 prefer |
| # You'll want to enable CONFIG_PPS and CONFIG_PPS_CLIENT_GPIO in your kernel, |
| # and an entry something like this in your device tree: |
| # pps { |
| # compatible = "pps-gpio"; |
| # gpios = <&ps7_gpio_0 56 0>; |
| # }; |
| |
| # Load source files matching the /etc/chrony/sources.d/*.sources pattern. |
| # These can be reloaded using 'chronyc reload sources'. |
| sourcedir /etc/chrony/sources.d |
| |
| # In first three updates step the system clock instead of slew |
| # if the adjustment is larger than 1 second. |
| makestep 1.0 3 |
| |
| # Record the rate at which the system clock gains/loses time, |
| # improving accuracy after reboot |
| driftfile /var/lib/chrony/drift |
| |
| # Enable kernel synchronization of the hardware real-time clock (RTC). |
| rtcsync |
| |
| # Allow NTP client access from local network. |
| #allow 192.168/16 |
| |
| # Serve time even if not synchronized to any NTP server. |
| #local stratum 10 |
| |
| # Specify file containing keys for NTP authentication. |
| #keyfile /etc/chrony.keys |
| |
| # Specify directory for log files. |
| logdir /var/log/chrony |
| |
| # Select which information is logged. |
| #log measurements statistics tracking |