swif: Add power supply sensors
Initially configure Swift's power supply sensors as they were on
Witherspoon. Keep the config files separate between systems as they will
be different due to differences between the power supplies used.
Tested:
Built Swift image that contained the config files
Built Witherspoon image that still contained the config files
(From meta-ibm rev: d8d27673f1b277db83859408842619ae24606235)
Change-Id: I64d893c6c5dbea0e4d4a592042b17d6bad5b4596
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
diff --git a/meta-ibm/meta-witherspoon/recipes-phosphor/sensors/phosphor-hwmon/swift/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@100/power-supply@68.conf b/meta-ibm/meta-witherspoon/recipes-phosphor/sensors/phosphor-hwmon/swift/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@100/power-supply@68.conf
new file mode 100644
index 0000000..2fadbde
--- /dev/null
+++ b/meta-ibm/meta-witherspoon/recipes-phosphor/sensors/phosphor-hwmon/swift/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@100/power-supply@68.conf
@@ -0,0 +1,23 @@
+LABEL_in1="ps0_input_voltage"
+WARNHI_in1="290000"
+WARNLO_in1="200000"
+CRITHI_in1="300000"
+CRITLO_in1="180000"
+
+LABEL_in2="ps0_output_voltage"
+WARNHI_in2="12700"
+WARNLO_in2="0"
+CRITHI_in2="13000"
+CRITLO_in2="0"
+
+LABEL_curr1="ps0_output_current"
+WARNHI_curr1="170000"
+WARNLO_curr1="0"
+CRITHI_curr1="180000"
+CRITLO_curr1="0"
+
+LABEL_power1="ps0_input_power"
+WARNHI_power1="2350000000"
+WARNLO_power1="0"
+CRITHI_power1="2500000000"
+CRITLO_power1="0"
diff --git a/meta-ibm/meta-witherspoon/recipes-phosphor/sensors/phosphor-hwmon/swift/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@100/power-supply@69.conf b/meta-ibm/meta-witherspoon/recipes-phosphor/sensors/phosphor-hwmon/swift/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@100/power-supply@69.conf
new file mode 100644
index 0000000..e463b51
--- /dev/null
+++ b/meta-ibm/meta-witherspoon/recipes-phosphor/sensors/phosphor-hwmon/swift/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@100/power-supply@69.conf
@@ -0,0 +1,23 @@
+LABEL_in1="ps1_input_voltage"
+WARNHI_in1="290000"
+WARNLO_in1="200000"
+CRITHI_in1="300000"
+CRITLO_in1="180000"
+
+LABEL_in2="ps1_output_voltage"
+WARNHI_in2="12700"
+WARNLO_in2="0"
+CRITHI_in2="13000"
+CRITLO_in2="0"
+
+LABEL_curr1="ps1_output_current"
+WARNHI_curr1="170000"
+WARNLO_curr1="0"
+CRITHI_curr1="180000"
+CRITLO_curr1="0"
+
+LABEL_power1="ps1_input_power"
+WARNHI_power1="2350000000"
+WARNLO_power1="0"
+CRITHI_power1="2500000000"
+CRITLO_power1="0"
diff --git a/meta-ibm/meta-witherspoon/recipes-phosphor/sensors/phosphor-hwmon_%.bbappend b/meta-ibm/meta-witherspoon/recipes-phosphor/sensors/phosphor-hwmon_%.bbappend
index c1089ff..993ca28 100644
--- a/meta-ibm/meta-witherspoon/recipes-phosphor/sensors/phosphor-hwmon_%.bbappend
+++ b/meta-ibm/meta-witherspoon/recipes-phosphor/sensors/phosphor-hwmon_%.bbappend
@@ -9,12 +9,12 @@
CHIPS = " \
bus@1e78a000/i2c-bus@100/max31785@52_air \
bus@1e78a000/i2c-bus@100/max31785@52_water \
+ bus@1e78a000/i2c-bus@100/power-supply@68 \
+ bus@1e78a000/i2c-bus@100/power-supply@69 \
"
CHIPS_append_witherspoon = " \
bus@1e78a000/i2c-bus@100/bmp280@77 \
bus@1e78a000/i2c-bus@100/dps310@76 \
- bus@1e78a000/i2c-bus@100/power-supply@68 \
- bus@1e78a000/i2c-bus@100/power-supply@69 \
bus@1e78a000/i2c-bus@140/ir35221@70 \
bus@1e78a000/i2c-bus@140/ir35221@71 \
bus@1e78a000/i2c-bus@180/ir35221@70 \