blob: a2912fc5680ef94542652acf0e172bcfeedb2421 [file] [log] [blame]
# Copyright (C) 2014 Intel Corporation
#
# Released under the MIT license (see COPYING.MIT)
# This module adds support to testimage.bbclass to deploy images and run
# tests using a "master image" - this is a "known good" image that is
# installed onto the device as part of initial setup and will be booted into
# with no interaction; we can then use it to deploy the image to be tested
# to a second partition before running the tests.
#
# For an example master image, see core-image-testmaster
# (meta/recipes-extended/images/core-image-testmaster.bb)
import os
import bb
import traceback
import time
import subprocess
import oeqa.targetcontrol
import oeqa.utils.sshcontrol as sshcontrol
import oeqa.utils.commands as commands
from oeqa.utils import CommandError
from abc import ABCMeta, abstractmethod
class MasterImageHardwareTarget(oeqa.targetcontrol.BaseTarget, metaclass=ABCMeta):
supported_image_fstypes = ['tar.gz', 'tar.bz2']
def __init__(self, d):
super(MasterImageHardwareTarget, self).__init__(d)
# target ip
addr = d.getVar("TEST_TARGET_IP") or bb.fatal('Please set TEST_TARGET_IP with the IP address of the machine you want to run the tests on.')
self.ip = addr.split(":")[0]
try:
self.port = addr.split(":")[1]
except IndexError:
self.port = None
bb.note("Target IP: %s" % self.ip)
self.server_ip = d.getVar("TEST_SERVER_IP")
if not self.server_ip:
try:
self.server_ip = subprocess.check_output(['ip', 'route', 'get', self.ip ]).split("\n")[0].split()[-1]
except Exception as e:
bb.fatal("Failed to determine the host IP address (alternatively you can set TEST_SERVER_IP with the IP address of this machine): %s" % e)
bb.note("Server IP: %s" % self.server_ip)
# test rootfs + kernel
self.image_fstype = self.get_image_fstype(d)
self.rootfs = os.path.join(d.getVar("DEPLOY_DIR_IMAGE"), d.getVar("IMAGE_LINK_NAME") + '.' + self.image_fstype)
self.kernel = os.path.join(d.getVar("DEPLOY_DIR_IMAGE"), d.getVar("KERNEL_IMAGETYPE", False) + '-' + d.getVar('MACHINE', False) + '.bin')
if not os.path.isfile(self.rootfs):
# we could've checked that IMAGE_FSTYPES contains tar.gz but the config for running testimage might not be
# the same as the config with which the image was build, ie
# you bitbake core-image-sato with IMAGE_FSTYPES += "tar.gz"
# and your autobuilder overwrites the config, adds the test bits and runs bitbake core-image-sato -c testimage
bb.fatal("No rootfs found. Did you build the image ?\nIf yes, did you build it with IMAGE_FSTYPES += \"tar.gz\" ? \
\nExpected path: %s" % self.rootfs)
if not os.path.isfile(self.kernel):
bb.fatal("No kernel found. Expected path: %s" % self.kernel)
# master ssh connection
self.master = None
# if the user knows what they are doing, then by all means...
self.user_cmds = d.getVar("TEST_DEPLOY_CMDS")
self.deploy_cmds = None
# this is the name of the command that controls the power for a board
# e.g: TEST_POWERCONTROL_CMD = "/home/user/myscripts/powercontrol.py ${MACHINE} what-ever-other-args-the-script-wants"
# the command should take as the last argument "off" and "on" and "cycle" (off, on)
self.powercontrol_cmd = d.getVar("TEST_POWERCONTROL_CMD") or None
self.powercontrol_args = d.getVar("TEST_POWERCONTROL_EXTRA_ARGS", False) or ""
self.serialcontrol_cmd = d.getVar("TEST_SERIALCONTROL_CMD") or None
self.serialcontrol_args = d.getVar("TEST_SERIALCONTROL_EXTRA_ARGS", False) or ""
self.origenv = os.environ
if self.powercontrol_cmd or self.serialcontrol_cmd:
# the external script for controlling power might use ssh
# ssh + keys means we need the original user env
bborigenv = d.getVar("BB_ORIGENV", False) or {}
for key in bborigenv:
val = bborigenv.getVar(key)
if val is not None:
self.origenv[key] = str(val)
if self.powercontrol_cmd:
if self.powercontrol_args:
self.powercontrol_cmd = "%s %s" % (self.powercontrol_cmd, self.powercontrol_args)
if self.serialcontrol_cmd:
if self.serialcontrol_args:
self.serialcontrol_cmd = "%s %s" % (self.serialcontrol_cmd, self.serialcontrol_args)
def power_ctl(self, msg):
if self.powercontrol_cmd:
cmd = "%s %s" % (self.powercontrol_cmd, msg)
try:
commands.runCmd(cmd, assert_error=False, preexec_fn=os.setsid, env=self.origenv)
except CommandError as e:
bb.fatal(str(e))
def power_cycle(self, conn):
if self.powercontrol_cmd:
# be nice, don't just cut power
conn.run("shutdown -h now")
time.sleep(10)
self.power_ctl("cycle")
else:
status, output = conn.run("sync; { sleep 1; reboot; } > /dev/null &")
if status != 0:
bb.error("Failed rebooting target and no power control command defined. You need to manually reset the device.\n%s" % output)
def _wait_until_booted(self):
''' Waits until the target device has booted (if we have just power cycled it) '''
# Subclasses with better methods of determining boot can override this
time.sleep(120)
def deploy(self):
# base class just sets the ssh log file for us
super(MasterImageHardwareTarget, self).deploy()
self.master = sshcontrol.SSHControl(ip=self.ip, logfile=self.sshlog, timeout=600, port=self.port)
status, output = self.master.run("cat /etc/masterimage")
if status != 0:
# We're not booted into the master image, so try rebooting
bb.plain("%s - booting into the master image" % self.pn)
self.power_ctl("cycle")
self._wait_until_booted()
bb.plain("%s - deploying image on target" % self.pn)
status, output = self.master.run("cat /etc/masterimage")
if status != 0:
bb.fatal("No ssh connectivity or target isn't running a master image.\n%s" % output)
if self.user_cmds:
self.deploy_cmds = self.user_cmds.split("\n")
try:
self._deploy()
except Exception as e:
bb.fatal("Failed deploying test image: %s" % e)
@abstractmethod
def _deploy(self):
pass
def start(self, extra_bootparams=None):
bb.plain("%s - boot test image on target" % self.pn)
self._start()
# set the ssh object for the target/test image
self.connection = sshcontrol.SSHControl(self.ip, logfile=self.sshlog, port=self.port)
bb.plain("%s - start running tests" % self.pn)
@abstractmethod
def _start(self):
pass
def stop(self):
bb.plain("%s - reboot/powercycle target" % self.pn)
self.power_cycle(self.master)
class SystemdbootTarget(MasterImageHardwareTarget):
def __init__(self, d):
super(SystemdbootTarget, self).__init__(d)
# this the value we need to set in the LoaderEntryOneShot EFI variable
# so the system boots the 'test' bootloader label and not the default
# The first four bytes are EFI bits, and the rest is an utf-16le string
# (EFI vars values need to be utf-16)
# $ echo -en "test\0" | iconv -f ascii -t utf-16le | hexdump -C
# 00000000 74 00 65 00 73 00 74 00 00 00 |t.e.s.t...|
self.efivarvalue = r'\x07\x00\x00\x00\x74\x00\x65\x00\x73\x00\x74\x00\x00\x00'
self.deploy_cmds = [
'mount -L boot /boot',
'mkdir -p /mnt/testrootfs',
'mount -L testrootfs /mnt/testrootfs',
'modprobe efivarfs',
'mount -t efivarfs efivarfs /sys/firmware/efi/efivars',
'cp ~/test-kernel /boot',
'rm -rf /mnt/testrootfs/*',
'tar xvf ~/test-rootfs.%s -C /mnt/testrootfs' % self.image_fstype,
'printf "%s" > /sys/firmware/efi/efivars/LoaderEntryOneShot-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f' % self.efivarvalue
]
def _deploy(self):
# make sure these aren't mounted
self.master.run("umount /boot; umount /mnt/testrootfs; umount /sys/firmware/efi/efivars;")
# from now on, every deploy cmd should return 0
# else an exception will be thrown by sshcontrol
self.master.ignore_status = False
self.master.copy_to(self.rootfs, "~/test-rootfs." + self.image_fstype)
self.master.copy_to(self.kernel, "~/test-kernel")
for cmd in self.deploy_cmds:
self.master.run(cmd)
def _start(self, params=None):
self.power_cycle(self.master)
# there are better ways than a timeout but this should work for now
time.sleep(120)
class SystemdbootTarget(MasterImageHardwareTarget):
def __init__(self, d):
super(SystemdbootTarget, self).__init__(d)
# this the value we need to set in the LoaderEntryOneShot EFI variable
# so the system boots the 'test' bootloader label and not the default
# The first four bytes are EFI bits, and the rest is an utf-16le string
# (EFI vars values need to be utf-16)
# $ echo -en "test\0" | iconv -f ascii -t utf-16le | hexdump -C
# 00000000 74 00 65 00 73 00 74 00 00 00 |t.e.s.t...|
self.efivarvalue = r'\x07\x00\x00\x00\x74\x00\x65\x00\x73\x00\x74\x00\x00\x00'
self.deploy_cmds = [
'mount -L boot /boot',
'mkdir -p /mnt/testrootfs',
'mount -L testrootfs /mnt/testrootfs',
'modprobe efivarfs',
'mount -t efivarfs efivarfs /sys/firmware/efi/efivars',
'cp ~/test-kernel /boot',
'rm -rf /mnt/testrootfs/*',
'tar xvf ~/test-rootfs.%s -C /mnt/testrootfs' % self.image_fstype,
'printf "%s" > /sys/firmware/efi/efivars/LoaderEntryOneShot-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f' % self.efivarvalue
]
def _deploy(self):
# make sure these aren't mounted
self.master.run("umount /boot; umount /mnt/testrootfs; umount /sys/firmware/efi/efivars;")
# from now on, every deploy cmd should return 0
# else an exception will be thrown by sshcontrol
self.master.ignore_status = False
self.master.copy_to(self.rootfs, "~/test-rootfs." + self.image_fstype)
self.master.copy_to(self.kernel, "~/test-kernel")
for cmd in self.deploy_cmds:
self.master.run(cmd)
def _start(self, params=None):
self.power_cycle(self.master)
# there are better ways than a timeout but this should work for now
time.sleep(120)