poky/documentation/migration-guides/migration-3.3.rst - openbmc/openbmc - Gitiles

 Release 3.3 (hardknott)
 =======================

 This section provides migration information for moving to the Yocto
 Project 3.3 Release (codename "hardknott") from the prior release.


 .. _migration-3.3-minimum-system-requirements:

 Minimum system requirements
 ---------------------------

 You will now need at least Python 3.6 installed on your build host. Most recent
 distributions provide this, but should you be building on a distribution that
 does not have it, you can use the ``buildtools-tarball`` (easily installable
 using ``scripts/install-buildtools``) - see
 :ref:`ref-manual/system-requirements:required git, tar, python and gcc versions`
 for details.


 .. _migration-3.3-removed-recipes:

 Removed recipes
 ---------------

 The following recipes have been removed:

 - ``go-dep``: obsolete with the advent of go modules
 - ``gst-validate``: replaced by ``gst-devtools``
 - ``linux-yocto``: removed 5.8 version recipes (5.4 / 5.10 still provided)
 - ``vulkan-demos``: replaced by ``vulkan-samples``


 .. _migration-3.3-common-license-only-versions:

 Single version common license file naming
 -----------------------------------------

 Some license files in ``meta/files/common-licenses`` have been renamed to match
 current SPDX naming conventions:

 - AGPL-3.0 -> AGPL-3.0-only
 - GPL-1.0 -> GPL-1.0-only
 - GPL-2.0 -> GPL-2.0-only
 - GPL-3.0 -> GPL-3.0-only
 - LGPL-2.0 -> LGPL-2.0-only
 - LGPL-2.1 -> LGPL-2.1-only
 - LGPL-3.0 -> LGPL-3.0-only

 Additionally, corresponding "-or-later" suffixed files have been added e.g.
 ``GPL-2.0-or-later``.

 It is not required that you change :term:`LICENSE` values as there are mappings
 from the original names in place; however, in rare cases where you have a recipe
 which sets :term:`LIC_FILES_CHKSUM` to point to file(s) in
 ``meta/files/common-licenses`` (which in any case is not recommended) you will
 need to update those.


 .. _migration-3.3-python3targetconfig:

 New ``python3targetconfig`` class
 ---------------------------------

 A new :ref:`python3targetconfig <ref-classes-python3targetconfig>` class has been
 created for situations where you would previously have inherited the
 :ref:`python3native <ref-classes-python3native>` class but need access to target configuration data (such as
 correct installation directories). Recipes where this situation applies should
 be changed to inherit ``python3targetconfig`` instead of ``python3native``. This
 also adds a dependency on target ``python3``, so it should only be used where
 appropriate in order to avoid unnecessarily lengthening builds.

 Some example recipes where this change has been made: ``gpgme``, ``libcap-ng``,
 ``python3-pycairo``.


 .. _migration-3.3-distutils-path:

 ``setup.py`` path for python modules
 ------------------------------------

 In a Python module, sometimes ``setup.py`` can be buried deep in the
 source tree. Previously this was handled in recipes by setting :term:`S` to
 point to the subdirectory within the source where ``setup.py`` is located.
 However with the recent :ref:`pseudo <overview-manual/concepts:fakeroot and pseudo>`
 changes, some Python modules make changes to files beneath ``${S}``, for
 example::

    S = "${WORKDIR}/git/python/pythonmodule"

 then in ``setup.py`` it works with source code in a relative fashion, such
 as ``../../src``. This causes pseudo to fail as it isn't able to track
 the paths properly. This release introduces a new ``DISTUTILS_SETUP_PATH``
 variable so that recipes can specify it explicitly, for example::

    S = "${WORKDIR}/git"
    DISTUTILS_SETUP_PATH = "${S}/python/pythonmodule"

 Recipes that inherit from ``distutils3`` (or
 :ref:`setuptools3 <ref-classes-setuptools3>` which itself inherits
 ``distutils3``) that also set :term:`S` to
 point to a Python module within a subdirectory in the aforementioned
 manner should be changed to set ``DISTUTILS_SETUP_PATH`` instead.


 .. _migration-3.3-bitbake:

 BitBake changes
 ---------------

 - BitBake is now configured to use a default ``umask`` of ``022`` for all tasks
   (specified via a new :term:`BB_DEFAULT_UMASK` variable). If needed, ``umask`` can
   still be set on a per-task basis via the ``umask`` varflag on the task
   function, but that is unlikely to be necessary in most cases.

 - If a version specified in :term:`PREFERRED_VERSION` is not available this
   will now trigger a warning instead of just a note, making such issues more
   visible.


 .. _migration-3.3-packaging:

 Packaging changes
 -----------------

 The following packaging changes have been made; in all cases the main package
 still depends upon the split out packages so you should not need to do anything
 unless you want to take advantage of the improved granularity:

 - ``dbus``: ``-common`` and ``-tools`` split out
 - ``iproute2``: split ``ip`` binary to its own package
 - ``net-tools``: split ``mii-tool`` into its own package
 - ``procps``: split ``ps`` and ``sysctl`` into their own packages
 - ``rpm``: split build and extra functionality into separate packages
 - ``sudo``: split ``sudo`` binary into ``sudo-sudo`` and libs into ``sudo-lib``
 - ``systemtap``: examples, python scripts and runtime material split out
 - ``util-linux``: ``libuuid`` has been split out to its own
   ``util-linux-libuuid`` recipe (and corresponding packages) to avoid circular
   dependencies if ``libgcrypt`` support is enabled in ``util-linux``.
   (``util-linux`` depends upon ``util-linux-libuuid``.)


 .. _migration-3.3-misc:

 Miscellaneous changes
 ---------------------

 - The default poky :term:`DISTRO_VERSION` value now uses the core metadata's
   git hash (i.e. :term:`METADATA_REVISION`) rather than the date (i.e.
   :term:`DATE`) to reduce one small source of non-reproducibility. You can
   of course specify your own :term:`DISTRO_VERSION` value as desired
   (particularly if you create your own custom distro configuration).
 - ``adwaita-icon-theme`` version 3.34.3 has been added back, and is selected
   as the default via :term:`PREFERRED_VERSION` in
   ``meta/conf/distro/include/default-versions.inc`` due to newer versions
   not working well with ``librsvg`` 2.40. ``librsvg`` is not practically
   upgradeable at the moment as it has been ported to Rust, and Rust is not
   (yet) in OE-Core, but this will change in a future release.
 - ``ffmpeg`` is now configured to disable GPL-licensed portions by default
   to make it harder to accidentally violate the GPL. To explicitly enable GPL
   licensed portions, add ``gpl`` to :term:`PACKAGECONFIG` for ``ffmpeg``
   using a bbappend (or use ``PACKAGECONFIG_append_pn-ffmpeg = " gpl"`` in
   your configuration.)
 - ``connman`` is now set to conflict with ``systemd-networkd`` as they
   overlap functionally and may interfere with each other at runtime.
 - Canonical SPDX license names are now used in image license manifests in
   order to avoid aliases of the same license from showing up together (e.g.
   ``GPLv2`` and ``GPL-2.0``)
	Release 3.3 (hardknott)
	=======================

	This section provides migration information for moving to the Yocto
	Project 3.3 Release (codename "hardknott") from the prior release.


	.. _migration-3.3-minimum-system-requirements:

	Minimum system requirements
	---------------------------

	You will now need at least Python 3.6 installed on your build host. Most recent
	distributions provide this, but should you be building on a distribution that
	does not have it, you can use the ``buildtools-tarball`` (easily installable
	using ``scripts/install-buildtools``) - see
	:ref:`ref-manual/system-requirements:required git, tar, python and gcc versions`
	for details.


	.. _migration-3.3-removed-recipes:

	Removed recipes
	---------------

	The following recipes have been removed:

	- ``go-dep``: obsolete with the advent of go modules
	- ``gst-validate``: replaced by ``gst-devtools``
	- ``linux-yocto``: removed 5.8 version recipes (5.4 / 5.10 still provided)
	- ``vulkan-demos``: replaced by ``vulkan-samples``


	.. _migration-3.3-common-license-only-versions:

	Single version common license file naming
	-----------------------------------------

	Some license files in ``meta/files/common-licenses`` have been renamed to match
	current SPDX naming conventions:

	- AGPL-3.0 -> AGPL-3.0-only
	- GPL-1.0 -> GPL-1.0-only
	- GPL-2.0 -> GPL-2.0-only
	- GPL-3.0 -> GPL-3.0-only
	- LGPL-2.0 -> LGPL-2.0-only
	- LGPL-2.1 -> LGPL-2.1-only
	- LGPL-3.0 -> LGPL-3.0-only

	Additionally, corresponding "-or-later" suffixed files have been added e.g.
	``GPL-2.0-or-later``.

	It is not required that you change :term:`LICENSE` values as there are mappings
	from the original names in place; however, in rare cases where you have a recipe
	which sets :term:`LIC_FILES_CHKSUM` to point to file(s) in
	``meta/files/common-licenses`` (which in any case is not recommended) you will
	need to update those.


	.. _migration-3.3-python3targetconfig:

	New ``python3targetconfig`` class
	---------------------------------

	A new :ref:`python3targetconfig <ref-classes-python3targetconfig>` class has been
	created for situations where you would previously have inherited the
	:ref:`python3native <ref-classes-python3native>` class but need access to target configuration data (such as
	correct installation directories). Recipes where this situation applies should
	be changed to inherit ``python3targetconfig`` instead of ``python3native``. This
	also adds a dependency on target ``python3``, so it should only be used where
	appropriate in order to avoid unnecessarily lengthening builds.

	Some example recipes where this change has been made: ``gpgme``, ``libcap-ng``,
	``python3-pycairo``.


	.. _migration-3.3-distutils-path:

	``setup.py`` path for python modules
	------------------------------------

	In a Python module, sometimes ``setup.py`` can be buried deep in the
	source tree. Previously this was handled in recipes by setting :term:`S` to
	point to the subdirectory within the source where ``setup.py`` is located.
	However with the recent :ref:`pseudo <overview-manual/concepts:fakeroot and pseudo>`
	changes, some Python modules make changes to files beneath ``${S}``, for
	example::

	S = "${WORKDIR}/git/python/pythonmodule"

	then in ``setup.py`` it works with source code in a relative fashion, such
	as ``../../src``. This causes pseudo to fail as it isn't able to track
	the paths properly. This release introduces a new ``DISTUTILS_SETUP_PATH``
	variable so that recipes can specify it explicitly, for example::

	S = "${WORKDIR}/git"
	DISTUTILS_SETUP_PATH = "${S}/python/pythonmodule"

	Recipes that inherit from ``distutils3`` (or
	:ref:`setuptools3 <ref-classes-setuptools3>` which itself inherits
	``distutils3``) that also set :term:`S` to
	point to a Python module within a subdirectory in the aforementioned
	manner should be changed to set ``DISTUTILS_SETUP_PATH`` instead.


	.. _migration-3.3-bitbake:

	BitBake changes
	---------------

	- BitBake is now configured to use a default ``umask`` of ``022`` for all tasks
	(specified via a new :term:`BB_DEFAULT_UMASK` variable). If needed, ``umask`` can
	still be set on a per-task basis via the ``umask`` varflag on the task
	function, but that is unlikely to be necessary in most cases.

	- If a version specified in :term:`PREFERRED_VERSION` is not available this
	will now trigger a warning instead of just a note, making such issues more
	visible.


	.. _migration-3.3-packaging:

	Packaging changes
	-----------------

	The following packaging changes have been made; in all cases the main package
	still depends upon the split out packages so you should not need to do anything
	unless you want to take advantage of the improved granularity:

	- ``dbus``: ``-common`` and ``-tools`` split out
	- ``iproute2``: split ``ip`` binary to its own package
	- ``net-tools``: split ``mii-tool`` into its own package
	- ``procps``: split ``ps`` and ``sysctl`` into their own packages
	- ``rpm``: split build and extra functionality into separate packages
	- ``sudo``: split ``sudo`` binary into ``sudo-sudo`` and libs into ``sudo-lib``
	- ``systemtap``: examples, python scripts and runtime material split out
	- ``util-linux``: ``libuuid`` has been split out to its own
	``util-linux-libuuid`` recipe (and corresponding packages) to avoid circular
	dependencies if ``libgcrypt`` support is enabled in ``util-linux``.
	(``util-linux`` depends upon ``util-linux-libuuid``.)


	.. _migration-3.3-misc:

	Miscellaneous changes
	---------------------

	- The default poky :term:`DISTRO_VERSION` value now uses the core metadata's
	git hash (i.e. :term:`METADATA_REVISION`) rather than the date (i.e.
	:term:`DATE`) to reduce one small source of non-reproducibility. You can
	of course specify your own :term:`DISTRO_VERSION` value as desired
	(particularly if you create your own custom distro configuration).
	- ``adwaita-icon-theme`` version 3.34.3 has been added back, and is selected
	as the default via :term:`PREFERRED_VERSION` in
	``meta/conf/distro/include/default-versions.inc`` due to newer versions
	not working well with ``librsvg`` 2.40. ``librsvg`` is not practically
	upgradeable at the moment as it has been ported to Rust, and Rust is not
	(yet) in OE-Core, but this will change in a future release.
	- ``ffmpeg`` is now configured to disable GPL-licensed portions by default
	to make it harder to accidentally violate the GPL. To explicitly enable GPL
	licensed portions, add ``gpl`` to :term:`PACKAGECONFIG` for ``ffmpeg``
	using a bbappend (or use ``PACKAGECONFIG_append_pn-ffmpeg = " gpl"`` in
	your configuration.)
	- ``connman`` is now set to conflict with ``systemd-networkd`` as they
	overlap functionally and may interfere with each other at runtime.
	- Canonical SPDX license names are now used in image license manifests in
	order to avoid aliases of the same license from showing up together (e.g.
	``GPLv2`` and ``GPL-2.0``)