| #ping = 172.31.14.1 |
| #ping = 172.26.1.255 |
| #interface = eth0 |
| #file = /var/log/messages |
| #change = 1407 |
| |
| # Uncomment to enable test. Setting one of these values to '0' disables it. |
| # These values will hopefully never reboot your machine during normal use |
| # (if your machine is really hung, the loadavg will go much higher than 25) |
| #max-load-1 = 24 |
| #max-load-5 = 18 |
| #max-load-15 = 12 |
| |
| # Note that this is the number of pages! |
| # To get the real size, check how large the pagesize is on your machine. |
| #min-memory = 1 |
| |
| #repair-binary = /usr/sbin/repair |
| #repair-timeout = |
| #test-binary = |
| #test-timeout = |
| |
| watchdog-device = /dev/watchdog |
| |
| # Defaults compiled into the binary |
| #temperature-device = |
| #max-temperature = 120 |
| |
| # Defaults compiled into the binary |
| #admin = root |
| #interval = 1 |
| #logtick = 1 |
| #log-dir = /var/log/watchdog |
| |
| # This greatly decreases the chance that watchdog won't be scheduled before |
| # your machine is really loaded |
| realtime = yes |
| priority = 1 |
| |
| # Check if rsyslogd is still running by enabling the following line |
| #pidfile = /var/run/rsyslogd.pid |
| |