blob: 62be89f0396a45fd09a36a1250d6e9465b015eae [file] [log] [blame]
#!/bin/sh
fslist="proc sys dev run"
rodir=run/initramfs/ro
rwdir=run/initramfs/rw
upper=$rwdir/cow
work=$rwdir/work
cd /
mkdir -p $fslist
mount dev dev -tdevtmpfs
mount sys sys -tsysfs
mount proc proc -tproc
if ! grep run proc/mounts
then
mount tmpfs run -t tmpfs -o mode=755,nodev
fi
mkdir -p $rodir $rwdir
cp -rp init shutdown update whitelist bin sbin usr lib etc var run/initramfs
# To start a interactive shell with job control at this point, run
# getty 38400 ttyS4
findmtd() {
m=$(grep -xl "$1" /sys/class/mtd/*/name)
m=${m%/name}
m=${m##*/}
echo $m
}
blkid_fs_type() {
# Emulate util-linux's `blkid -s TYPE -o value $1`
# Example busybox blkid output:
# # blkid /dev/mtdblock5
# /dev/mtdblock5: TYPE="squashfs"
# Process output to extract TYPE value "squashfs".
blkid $1 | sed -e 's/^.*TYPE="//' -e 's/".*$//'
}
probe_fs_type() {
fst=$(blkid_fs_type $1)
echo ${fst:=jffs2}
}
# This fw_get_env_var is a possibly broken version of fw_printenv that
# does not check the crc or flag byte.
# The u-boot environment starts with a crc32, followed by a flag byte
# when a redundannt environment is configured, followed by var=value\0 sets.
# The flag byte for nand is a 1 byte counter; for nor it is a 1 or 0 byte.
get_fw_env_var() {
# do we have 1 or 2 copies of the environment?
# count non-blank non-comment lines
# copies=$(grep -v ^# /etc/fw_env.config | grep -c [::alnum::])
# ... we could if we had the fw_env.config in the initramfs
copies=2
# * Change \n to \r and \0 to \n
# * Skip to the 5th byte to skip over crc
# * then skip to the first or 2nd byte to skip over flag if it exists
# * stop parsing at first empty line corresponding to the
# double \0 at the end of the environment.
# * print the value of the variable name passed as argument
envdev=$(findmtd u-boot-env)
if test -n $envdev
then
cat /dev/$envdev |
tr '\n\000' '\r\n' |
tail -c +5 | tail -c +${copies-1} |
sed -ne '/^$/,$d' -e "s/^$1=//p"
fi
}
setup_resolv() {
runresolv=/run/systemd/resolve/resolv.conf
etcresolv=/etc/resolv.conf
if test ! -e $etcresolv -a ! -L $etcresolv
then
mkdir -p ${runresolv%/*}
ln -s $runresolv $etcresolv
fi
if test ! -f $runresolv
then
cat /proc/net/pnp > $runresolv
fi
return 0
}
try_tftp() {
# split into tftp:// host:port/ path/on/remote
# then spilt off / and then :port from the end of host:port/
# and : from the beginning of port
rest="${1#tftp://}"
path=${rest#*/}
host=${rest%$path}
host="${host%/}"
port="${host#${host%:*}}"
host="${host%$port}"
port="${port#:}"
setup_resolv
if test -z "$host" -o -z "$path"
then
debug_takeover "Invalid tftp download url '$url'."
elif echo "Downloading '$url' from $host ..." &&
! tftp -g -r "$path" -l /run/image-rofs "$host" ${port+"$port"}
then
debug_takeover "Download of '$url' failed."
fi
}
try_wget() {
setup_resolv
echo "Downloading '$1' ..."
if ! wget -O /run/image-rofs "$1"
then
debug_takeover "Download of '$url' failed."
fi
}
debug_takeover() {
echo "$@"
test -n "$@" && echo Enter password to try to manually fix.
cat << HERE
After fixing run exit to continue this script, or reboot -f to retry, or
touch /takeover and exit to become PID 1 allowing editing of this script.
HERE
while ! sulogin && ! test -f /takeover
do
echo getty failed, retrying
done
# Touch /takeover in the above getty to become pid 1
if test -e /takeover
then
cat << HERE
Takeover of init requested. Executing /bin/sh as PID 1.
When finished exec new init or cleanup and run reboot -f.
Warning: No job control! Shell exit will panic the system!
HERE
export PS1=init#\
exec /bin/sh
fi
}
rofs=$(findmtd rofs)
rwfs=$(findmtd rwfs)
rodev=/dev/mtdblock${rofs#mtd}
rwdev=/dev/mtdblock${rwfs#mtd}
# Set to y for yes, anything else for no.
force_rwfst_jffs2=y
flash_images_before_init=n
consider_download_files=y
consider_download_tftp=y
consider_download_http=y
consider_download_ftp=y
rofst=squashfs
rwfst=$(probe_fs_type $rwdev)
roopts=ro
rwopts=rw
image=/run/initramfs/image-
trigger=${image}rwfs
init=/sbin/init
fsckbase=/sbin/fsck.
fsck=$fsckbase$rwfst
fsckopts=-a
optfile=/run/initramfs/init-options
optbase=/run/initramfs/init-options-base
urlfile=/run/initramfs/init-download-url
update=/run/initramfs/update
if test -e /${optfile##*/}
then
cp /${optfile##*/} $optfile
fi
if test -e /${optbase##*/}
then
cp /${optbase##*/} $optbase
else
touch $optbase
fi
if test ! -f $optfile
then
cat /proc/cmdline $optbase > $optfile
get_fw_env_var openbmcinit >> $optfile
get_fw_env_var openbmconce >> $optfile
fi
echo rofs = $rofs $rofst rwfs = $rwfs $rwfst
if grep -w debug-init-sh $optfile
then
debug_takeover "Debug initial shell requested by command line."
fi
if test "x$consider_download_files" = xy &&
grep -w openbmc-init-download-files $optfile
then
if test -f ${urlfile##*/}
then
cp ${urlfile##*/} $urlfile
fi
if test ! -f $urlfile
then
get_fw_env_var openbmcinitdownloadurl > $urlfile
fi
url="$(cat $urlfile)"
rest="${url#*://}"
proto="${url%$rest}"
if test -z "$url"
then
echo "Download url empty. Ignoring download request."
elif test -z "$proto"
then
echo "Download failed."
elif test "$proto" = tftp://
then
if test "x$consider_download_tftp" = xy
then
try_tftp "$url"
else
echo "Download failed."
fi
elif test "$proto" = http://
then
if test "x$consider_download_http" = xy
then
try_wget "$url"
else
echo "Download failed."
fi
elif test "$proto" = ftp://
then
if test "x$consider_download_ftp" = xy
then
try_wget "$url"
else
echo "Download failed."
fi
else
echo "Download failed."
fi
fi
# If there are images in root move them to /run/initramfs/ or /run/ now.
imagebasename=${image##*/}
if test -n "${imagebasename}" && ls /${imagebasename}* > /dev/null 2>&1
then
if test "x$flash_images_before_init" = xy
then
echo "Flash images found, will update before starting init."
mv /${imagebasename}* ${image%$imagebasename}
else
echo "Flash images found, will use but deferring flash update."
mv /${imagebasename}* /run/
fi
fi
if grep -w clean-rwfs-filesystem $optfile
then
echo "Cleaning of read-write overlay filesystem requested."
touch $trigger
fi
if grep -w factory-reset $optfile
then
echo "Factory reset requested."
touch $trigger
do_save=--no-save-files
else
do_save=--save-files
fi
if test "x$force_rwfst_jffs2" = xy -a $rwfst != jffs2 -a ! -f $trigger
then
echo "Converting read-write overlay filesystem to jffs2 forced."
touch $trigger
fi
if ls $image* > /dev/null 2>&1
then
if ! test -x $update
then
debug_takeover "Flash update requested but $update missing!"
elif test -f $trigger -a ! -s $trigger
then
if [ $do_save = "--save-files" ]
then
echo "Saving selected files from read-write overlay filesystem."
else
echo "No files will be selected for save."
fi
$update --no-restore-files $do_save
echo "Clearing read-write overlay filesystem."
flash_eraseall /dev/$rwfs
echo "Restoring saved files to read-write overlay filesystem."
touch $trigger
$update --no-save-files --clean-saved-files
else
$update --clean-saved-files $do_save
fi
rwfst=$(probe_fs_type $rwdev)
fsck=$fsckbase$rwfst
fi
if grep -w overlay-filesystem-in-ram $optfile
then
rwfst=none
fi
copyfiles=
if grep -w copy-files-to-ram $optfile
then
rwfst=none
copyfiles=y
fi
# It would be nice to do this after fsck but that mean rofs is mounted
# which triggers the mtd is mounted check
if test "$rwfst$copyfiles" = noney
then
touch $trigger
$update --copy-files --clean-saved-files --no-restore-files
fi
if grep -w copy-base-filesystem-to-ram $optfile &&
test ! -e /run/image-rofs && ! cp $rodev /run/image-rofs
then
# Remove any partial copy to avoid attempted usage later
if test -e /run/image-rofs
then
ls -l /run/image-rofs
rm -f /run/image-rofs
fi
debug_takeover "Copying $rodev to /run/image-rofs failed."
fi
if test -s /run/image-rofs
then
rodev=/run/image-rofs
roopts=$roopts,loop
fi
mount $rodev $rodir -t $rofst -o $roopts
if test -x $rodir$fsck
then
for fs in $fslist
do
mount --bind $fs $rodir/$fs
done
chroot $rodir $fsck $fsckopts $rwdev
rc=$?
for fs in $fslist
do
umount $rodir/$fs
done
if test $rc -gt 1
then
debug_takeover "fsck of read-write fs on $rwdev failed (rc=$rc)"
fi
elif test "$rwfst" != jffs2 -a "$rwfst" != none
then
echo "No '$fsck' in read only fs, skipping fsck."
fi
if test "$rwfst" = none
then
echo "Running with read-write overlay in RAM for this boot."
echo "No state will be preserved unless flash update performed."
elif ! mount $rwdev $rwdir -t $rwfst -o $rwopts
then
msg="$(cat)" << HERE
Mounting read-write $rwdev filesystem failed. Please fix and run
mount $rwdev $rwdir -t $rwfst -o $rwopts
to to continue, or do change nothing to run from RAM for this boot.
HERE
debug_takeover "$msg"
fi
rm -rf $work
mkdir -p $upper $work
mount -t overlay -o lowerdir=$rodir,upperdir=$upper,workdir=$work cow /root
while ! chroot /root /bin/sh -c "test -x '$init' -a -s '$init'"
do
msg="$(cat)" << HERE
Unable to confirm /sbin/init is an executable non-empty file
in merged file system mounted at /root.
Change Root test failed! Invoking emergency shell.
HERE
debug_takeover "$msg"
done
for f in $fslist
do
mount --move $f root/$f
done
# switch_root /root $init
exec chroot /root $init