blob: b5ca8f2c2f1c75eb3ca36d16cddac3eb177ad9be [file] [log] [blame]
# Development tool - deploy/undeploy command plugin
#
# Copyright (C) 2014-2016 Intel Corporation
#
# SPDX-License-Identifier: GPL-2.0-only
#
"""Devtool plugin containing the deploy subcommands"""
import logging
import os
import shutil
import subprocess
import tempfile
import bb.utils
import argparse_oe
import oe.types
from devtool import exec_fakeroot_no_d, setup_tinfoil, check_workspace_recipe, DevtoolError
logger = logging.getLogger('devtool')
deploylist_path = '/.devtool'
def _prepare_remote_script(deploy, verbose=False, dryrun=False, undeployall=False, nopreserve=False, nocheckspace=False):
"""
Prepare a shell script for running on the target to
deploy/undeploy files. We have to be careful what we put in this
script - only commands that are likely to be available on the
target are suitable (the target might be constrained, e.g. using
busybox rather than bash with coreutils).
"""
lines = []
lines.append('#!/bin/sh')
lines.append('set -e')
if undeployall:
# Yes, I know this is crude - but it does work
lines.append('for entry in %s/*.list; do' % deploylist_path)
lines.append('[ ! -f $entry ] && exit')
lines.append('set `basename $entry | sed "s/.list//"`')
if dryrun:
if not deploy:
lines.append('echo "Previously deployed files for $1:"')
lines.append('manifest="%s/$1.list"' % deploylist_path)
lines.append('preservedir="%s/$1.preserve"' % deploylist_path)
lines.append('if [ -f $manifest ] ; then')
# Read manifest in reverse and delete files / remove empty dirs
lines.append(' sed \'1!G;h;$!d\' $manifest | while read file')
lines.append(' do')
if dryrun:
lines.append(' if [ ! -d $file ] ; then')
lines.append(' echo $file')
lines.append(' fi')
else:
lines.append(' if [ -d $file ] ; then')
# Avoid deleting a preserved directory in case it has special perms
lines.append(' if [ ! -d $preservedir/$file ] ; then')
lines.append(' rmdir $file > /dev/null 2>&1 || true')
lines.append(' fi')
lines.append(' else')
lines.append(' rm -f $file')
lines.append(' fi')
lines.append(' done')
if not dryrun:
lines.append(' rm $manifest')
if not deploy and not dryrun:
# May as well remove all traces
lines.append(' rmdir `dirname $manifest` > /dev/null 2>&1 || true')
lines.append('fi')
if deploy:
if not nocheckspace:
# Check for available space
# FIXME This doesn't take into account files spread across multiple
# partitions, but doing that is non-trivial
# Find the part of the destination path that exists
lines.append('checkpath="$2"')
lines.append('while [ "$checkpath" != "/" ] && [ ! -e $checkpath ]')
lines.append('do')
lines.append(' checkpath=`dirname "$checkpath"`')
lines.append('done')
lines.append(r'freespace=$(df -P $checkpath | sed -nre "s/^(\S+\s+){3}([0-9]+).*/\2/p")')
# First line of the file is the total space
lines.append('total=`head -n1 $3`')
lines.append('if [ $total -gt $freespace ] ; then')
lines.append(' echo "ERROR: insufficient space on target (available ${freespace}, needed ${total})"')
lines.append(' exit 1')
lines.append('fi')
if not nopreserve:
# Preserve any files that exist. Note that this will add to the
# preserved list with successive deployments if the list of files
# deployed changes, but because we've deleted any previously
# deployed files at this point it will never preserve anything
# that was deployed, only files that existed prior to any deploying
# (which makes the most sense)
lines.append('cat $3 | sed "1d" | while read file fsize')
lines.append('do')
lines.append(' if [ -e $file ] ; then')
lines.append(' dest="$preservedir/$file"')
lines.append(' mkdir -p `dirname $dest`')
lines.append(' mv $file $dest')
lines.append(' fi')
lines.append('done')
lines.append('rm $3')
lines.append('mkdir -p `dirname $manifest`')
lines.append('mkdir -p $2')
if verbose:
lines.append(' tar xv -C $2 -f - | tee $manifest')
else:
lines.append(' tar xv -C $2 -f - > $manifest')
lines.append('sed -i "s!^./!$2!" $manifest')
elif not dryrun:
# Put any preserved files back
lines.append('if [ -d $preservedir ] ; then')
lines.append(' cd $preservedir')
# find from busybox might not have -exec, so we don't use that
lines.append(' find . -type f | while read file')
lines.append(' do')
lines.append(' mv $file /$file')
lines.append(' done')
lines.append(' cd /')
lines.append(' rm -rf $preservedir')
lines.append('fi')
if undeployall:
if not dryrun:
lines.append('echo "NOTE: Successfully undeployed $1"')
lines.append('done')
# Delete the script itself
lines.append('rm $0')
lines.append('')
return '\n'.join(lines)
def deploy(args, config, basepath, workspace):
"""Entry point for the devtool 'deploy' subcommand"""
import oe.utils
check_workspace_recipe(workspace, args.recipename, checksrc=False)
tinfoil = setup_tinfoil(basepath=basepath)
try:
try:
rd = tinfoil.parse_recipe(args.recipename)
except Exception as e:
raise DevtoolError('Exception parsing recipe %s: %s' %
(args.recipename, e))
srcdir = rd.getVar('D')
workdir = rd.getVar('WORKDIR')
path = rd.getVar('PATH')
strip_cmd = rd.getVar('STRIP')
libdir = rd.getVar('libdir')
base_libdir = rd.getVar('base_libdir')
max_process = oe.utils.get_bb_number_threads(rd)
fakerootcmd = rd.getVar('FAKEROOTCMD')
fakerootenv = rd.getVar('FAKEROOTENV')
finally:
tinfoil.shutdown()
return deploy_no_d(srcdir, workdir, path, strip_cmd, libdir, base_libdir, max_process, fakerootcmd, fakerootenv, args)
def deploy_no_d(srcdir, workdir, path, strip_cmd, libdir, base_libdir, max_process, fakerootcmd, fakerootenv, args):
import math
import oe.package
try:
host, destdir = args.target.split(':')
except ValueError:
destdir = '/'
else:
args.target = host
if not destdir.endswith('/'):
destdir += '/'
recipe_outdir = srcdir
if not os.path.exists(recipe_outdir) or not os.listdir(recipe_outdir):
raise DevtoolError('No files to deploy - have you built the %s '
'recipe? If so, the install step has not installed '
'any files.' % args.recipename)
if args.strip and not args.dry_run:
# Fakeroot copy to new destination
srcdir = recipe_outdir
recipe_outdir = os.path.join(workdir, 'devtool-deploy-target-stripped')
if os.path.isdir(recipe_outdir):
exec_fakeroot_no_d(fakerootcmd, fakerootenv, "rm -rf %s" % recipe_outdir, shell=True)
exec_fakeroot_no_d(fakerootcmd, fakerootenv, "cp -af %s %s" % (os.path.join(srcdir, '.'), recipe_outdir), shell=True)
os.environ['PATH'] = ':'.join([os.environ['PATH'], path or ''])
oe.package.strip_execs(args.recipename, recipe_outdir, strip_cmd, libdir, base_libdir, max_process)
filelist = []
inodes = set({})
ftotalsize = 0
for root, _, files in os.walk(recipe_outdir):
for fn in files:
fstat = os.lstat(os.path.join(root, fn))
# Get the size in kiB (since we'll be comparing it to the output of du -k)
# MUST use lstat() here not stat() or getfilesize() since we don't want to
# dereference symlinks
if fstat.st_ino in inodes:
fsize = 0
else:
fsize = int(math.ceil(float(fstat.st_size)/1024))
inodes.add(fstat.st_ino)
ftotalsize += fsize
# The path as it would appear on the target
fpath = os.path.join(destdir, os.path.relpath(root, recipe_outdir), fn)
filelist.append((fpath, fsize))
if args.dry_run:
print('Files to be deployed for %s on target %s:' % (args.recipename, args.target))
for item, _ in filelist:
print(' %s' % item)
return 0
extraoptions = ''
if args.no_host_check:
extraoptions += '-o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no'
if not args.show_status:
extraoptions += ' -q'
scp_sshexec = ''
ssh_sshexec = 'ssh'
if args.ssh_exec:
scp_sshexec = "-S %s" % args.ssh_exec
ssh_sshexec = args.ssh_exec
scp_port = ''
ssh_port = ''
if args.port:
scp_port = "-P %s" % args.port
ssh_port = "-p %s" % args.port
if args.key:
extraoptions += ' -i %s' % args.key
# In order to delete previously deployed files and have the manifest file on
# the target, we write out a shell script and then copy it to the target
# so we can then run it (piping tar output to it).
# (We cannot use scp here, because it doesn't preserve symlinks.)
tmpdir = tempfile.mkdtemp(prefix='devtool')
try:
tmpscript = '/tmp/devtool_deploy.sh'
tmpfilelist = os.path.join(os.path.dirname(tmpscript), 'devtool_deploy.list')
shellscript = _prepare_remote_script(deploy=True,
verbose=args.show_status,
nopreserve=args.no_preserve,
nocheckspace=args.no_check_space)
# Write out the script to a file
with open(os.path.join(tmpdir, os.path.basename(tmpscript)), 'w') as f:
f.write(shellscript)
# Write out the file list
with open(os.path.join(tmpdir, os.path.basename(tmpfilelist)), 'w') as f:
f.write('%d\n' % ftotalsize)
for fpath, fsize in filelist:
f.write('%s %d\n' % (fpath, fsize))
# Copy them to the target
ret = subprocess.call("scp %s %s %s %s/* %s:%s" % (scp_sshexec, scp_port, extraoptions, tmpdir, args.target, os.path.dirname(tmpscript)), shell=True)
if ret != 0:
raise DevtoolError('Failed to copy script to %s - rerun with -s to '
'get a complete error message' % args.target)
finally:
shutil.rmtree(tmpdir)
# Now run the script
ret = exec_fakeroot_no_d(fakerootcmd, fakerootenv, 'tar cf - . | %s %s %s %s \'sh %s %s %s %s\'' % (ssh_sshexec, ssh_port, extraoptions, args.target, tmpscript, args.recipename, destdir, tmpfilelist), cwd=recipe_outdir, shell=True)
if ret != 0:
raise DevtoolError('Deploy failed - rerun with -s to get a complete '
'error message')
logger.info('Successfully deployed %s' % recipe_outdir)
files_list = []
for root, _, files in os.walk(recipe_outdir):
for filename in files:
filename = os.path.relpath(os.path.join(root, filename), recipe_outdir)
files_list.append(os.path.join(destdir, filename))
return 0
def undeploy(args, config, basepath, workspace):
"""Entry point for the devtool 'undeploy' subcommand"""
if args.all and args.recipename:
raise argparse_oe.ArgumentUsageError('Cannot specify -a/--all with a recipe name', 'undeploy-target')
elif not args.recipename and not args.all:
raise argparse_oe.ArgumentUsageError('If you don\'t specify a recipe, you must specify -a/--all', 'undeploy-target')
extraoptions = ''
if args.no_host_check:
extraoptions += '-o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no'
if not args.show_status:
extraoptions += ' -q'
scp_sshexec = ''
ssh_sshexec = 'ssh'
if args.ssh_exec:
scp_sshexec = "-S %s" % args.ssh_exec
ssh_sshexec = args.ssh_exec
scp_port = ''
ssh_port = ''
if args.port:
scp_port = "-P %s" % args.port
ssh_port = "-p %s" % args.port
args.target = args.target.split(':')[0]
tmpdir = tempfile.mkdtemp(prefix='devtool')
try:
tmpscript = '/tmp/devtool_undeploy.sh'
shellscript = _prepare_remote_script(deploy=False, dryrun=args.dry_run, undeployall=args.all)
# Write out the script to a file
with open(os.path.join(tmpdir, os.path.basename(tmpscript)), 'w') as f:
f.write(shellscript)
# Copy it to the target
ret = subprocess.call("scp %s %s %s %s/* %s:%s" % (scp_sshexec, scp_port, extraoptions, tmpdir, args.target, os.path.dirname(tmpscript)), shell=True)
if ret != 0:
raise DevtoolError('Failed to copy script to %s - rerun with -s to '
'get a complete error message' % args.target)
finally:
shutil.rmtree(tmpdir)
# Now run the script
ret = subprocess.call('%s %s %s %s \'sh %s %s\'' % (ssh_sshexec, ssh_port, extraoptions, args.target, tmpscript, args.recipename), shell=True)
if ret != 0:
raise DevtoolError('Undeploy failed - rerun with -s to get a complete '
'error message')
if not args.all and not args.dry_run:
logger.info('Successfully undeployed %s' % args.recipename)
return 0
def register_commands(subparsers, context):
"""Register devtool subcommands from the deploy plugin"""
parser_deploy = subparsers.add_parser('deploy-target',
help='Deploy recipe output files to live target machine',
description='Deploys a recipe\'s build output (i.e. the output of the do_install task) to a live target machine over ssh. By default, any existing files will be preserved instead of being overwritten and will be restored if you run devtool undeploy-target. Note: this only deploys the recipe itself and not any runtime dependencies, so it is assumed that those have been installed on the target beforehand.',
group='testbuild')
parser_deploy.add_argument('recipename', help='Recipe to deploy')
parser_deploy.add_argument('target', help='Live target machine running an ssh server: user@hostname[:destdir]')
parser_deploy.add_argument('-c', '--no-host-check', help='Disable ssh host key checking', action='store_true')
parser_deploy.add_argument('-s', '--show-status', help='Show progress/status output', action='store_true')
parser_deploy.add_argument('-n', '--dry-run', help='List files to be deployed only', action='store_true')
parser_deploy.add_argument('-p', '--no-preserve', help='Do not preserve existing files', action='store_true')
parser_deploy.add_argument('--no-check-space', help='Do not check for available space before deploying', action='store_true')
parser_deploy.add_argument('-e', '--ssh-exec', help='Executable to use in place of ssh')
parser_deploy.add_argument('-P', '--port', help='Specify port to use for connection to the target')
parser_deploy.add_argument('-I', '--key',
help='Specify ssh private key for connection to the target')
strip_opts = parser_deploy.add_mutually_exclusive_group(required=False)
strip_opts.add_argument('-S', '--strip',
help='Strip executables prior to deploying (default: %(default)s). '
'The default value of this option can be controlled by setting the strip option in the [Deploy] section to True or False.',
default=oe.types.boolean(context.config.get('Deploy', 'strip', default='0')),
action='store_true')
strip_opts.add_argument('--no-strip', help='Do not strip executables prior to deploy', dest='strip', action='store_false')
parser_deploy.set_defaults(func=deploy)
parser_undeploy = subparsers.add_parser('undeploy-target',
help='Undeploy recipe output files in live target machine',
description='Un-deploys recipe output files previously deployed to a live target machine by devtool deploy-target.',
group='testbuild')
parser_undeploy.add_argument('recipename', help='Recipe to undeploy (if not using -a/--all)', nargs='?')
parser_undeploy.add_argument('target', help='Live target machine running an ssh server: user@hostname')
parser_undeploy.add_argument('-c', '--no-host-check', help='Disable ssh host key checking', action='store_true')
parser_undeploy.add_argument('-s', '--show-status', help='Show progress/status output', action='store_true')
parser_undeploy.add_argument('-a', '--all', help='Undeploy all recipes deployed on the target', action='store_true')
parser_undeploy.add_argument('-n', '--dry-run', help='List files to be undeployed only', action='store_true')
parser_undeploy.add_argument('-e', '--ssh-exec', help='Executable to use in place of ssh')
parser_undeploy.add_argument('-P', '--port', help='Specify port to use for connection to the target')
parser_undeploy.add_argument('-I', '--key',
help='Specify ssh private key for connection to the target')
parser_undeploy.set_defaults(func=undeploy)