blob: 74167befadd1c4a8fe68b65a874edf9633bb4870 [file] [log] [blame]
Andrew Geisslerf0343792020-11-18 10:42:21 -06001.. SPDX-License-Identifier: CC-BY-SA-2.0-UK
Andrew Geisslerc9f78652020-09-18 14:11:35 -05002
3=========================
4Yocto Project Quick Build
5=========================
6
7Welcome!
8========
9
10This short document steps you through the process for a typical
11image build using the Yocto Project. The document also introduces how to
12configure a build for specific hardware. You will use Yocto Project to
13build a reference embedded OS called Poky.
14
15.. note::
16
17 - The examples in this paper assume you are using a native Linux
18 system running a recent Ubuntu Linux distribution. If the machine
19 you want to use Yocto Project on to build an image
20 (:term:`Build Host`) is not
21 a native Linux system, you can still perform these steps by using
22 CROss PlatformS (CROPS) and setting up a Poky container. See the
Andrew Geissler09209ee2020-12-13 08:44:15 -060023 :ref:`dev-manual/start:setting up to use cross platforms (crops)`
Andrew Geisslerc9f78652020-09-18 14:11:35 -050024 section
25 in the Yocto Project Development Tasks Manual for more
26 information.
27
28 - You may use Windows Subsystem For Linux v2 to set up a build host
29 using Windows 10.
30
31 .. note::
32
33 The Yocto Project is not compatible with WSLv1, it is
34 compatible but not officially supported nor validated with
35 WSLv2, if you still decide to use WSL please upgrade to WSLv2.
36
Andrew Geissler09209ee2020-12-13 08:44:15 -060037 See the :ref:`dev-manual/start:setting up to use windows
Andrew Geisslerc9f78652020-09-18 14:11:35 -050038 subsystem for linux (wslv2)` section in the Yocto Project Development
39 Tasks Manual for more information.
40
41If you want more conceptual or background information on the Yocto
Andrew Geissler09209ee2020-12-13 08:44:15 -060042Project, see the :doc:`/overview-manual/index`.
Andrew Geisslerc9f78652020-09-18 14:11:35 -050043
44Compatible Linux Distribution
45=============================
46
47Make sure your :term:`Build Host` meets the
48following requirements:
49
50- 50 Gbytes of free disk space
51
52- Runs a supported Linux distribution (i.e. recent releases of Fedora,
53 openSUSE, CentOS, Debian, or Ubuntu). For a list of Linux
54 distributions that support the Yocto Project, see the
Andrew Geissler09209ee2020-12-13 08:44:15 -060055 :ref:`ref-manual/system-requirements:supported linux distributions`
Andrew Geisslerc9f78652020-09-18 14:11:35 -050056 section in the Yocto Project Reference Manual. For detailed
57 information on preparing your build host, see the
Andrew Geissler09209ee2020-12-13 08:44:15 -060058 :ref:`dev-manual/start:preparing the build host`
Andrew Geisslerc9f78652020-09-18 14:11:35 -050059 section in the Yocto Project Development Tasks Manual.
60
61-
62
Andrew Geissler3b8a17c2021-04-15 15:55:55 -050063 - Git &MIN_GIT_VERSION; or greater
64 - tar &MIN_TAR_VERSION; or greater
65 - Python &MIN_PYTHON_VERSION; or greater.
66 - gcc &MIN_GCC_VERSION; or greater.
Andrew Geisslerc9f78652020-09-18 14:11:35 -050067
68If your build host does not meet any of these three listed version
69requirements, you can take steps to prepare the system so that you
70can still use the Yocto Project. See the
Andrew Geissler09209ee2020-12-13 08:44:15 -060071:ref:`ref-manual/system-requirements:required git, tar, python and gcc versions`
Andrew Geisslerc9f78652020-09-18 14:11:35 -050072section in the Yocto Project Reference Manual for information.
73
74Build Host Packages
75===================
76
77You must install essential host packages on your build host. The
78following command installs the host packages based on an Ubuntu
79distribution:
80
81.. code-block:: shell
82
83 $ sudo apt-get install &UBUNTU_HOST_PACKAGES_ESSENTIAL;
84
85.. note::
86
87 For host package requirements on all supported Linux distributions,
Andrew Geissler09209ee2020-12-13 08:44:15 -060088 see the :ref:`ref-manual/system-requirements:required packages for the build host`
Andrew Geisslerc9f78652020-09-18 14:11:35 -050089 section in the Yocto Project Reference Manual.
90
91Use Git to Clone Poky
92=====================
93
94Once you complete the setup instructions for your machine, you need to
95get a copy of the Poky repository on your build host. Use the following
96commands to clone the Poky repository.
97
98.. code-block:: shell
99
100 $ git clone git://git.yoctoproject.org/poky
101 Cloning into 'poky'...
102 remote: Counting
103 objects: 432160, done. remote: Compressing objects: 100%
104 (102056/102056), done. remote: Total 432160 (delta 323116), reused
105 432037 (delta 323000) Receiving objects: 100% (432160/432160), 153.81 MiB | 8.54 MiB/s, done.
106 Resolving deltas: 100% (323116/323116), done.
107 Checking connectivity... done.
108
Andrew Geissler3b8a17c2021-04-15 15:55:55 -0500109Go to :yocto_wiki:`Releases wiki page </Releases>`, and choose a release
110codename (such as ``&DISTRO_NAME_NO_CAP;``), corresponding to either the
111latest stable release or a Long Term Support release.
112
113Then move to the ``poky`` directory and take a look at existing branches:
Andrew Geisslerc9f78652020-09-18 14:11:35 -0500114
115.. code-block:: shell
116
117 $ cd poky
Andrew Geissler3b8a17c2021-04-15 15:55:55 -0500118 $ git branch -a
Andrew Geisslerc9f78652020-09-18 14:11:35 -0500119 .
120 .
121 .
Andrew Geissler3b8a17c2021-04-15 15:55:55 -0500122 remotes/origin/HEAD -> origin/master
123 remotes/origin/dunfell
124 remotes/origin/dunfell-next
125 .
126 .
127 .
128 remotes/origin/gatesgarth
129 remotes/origin/gatesgarth-next
130 .
131 .
132 .
133 remotes/origin/master
134 remotes/origin/master-next
135 .
136 .
137 .
Andrew Geisslerc9f78652020-09-18 14:11:35 -0500138
Andrew Geissler3b8a17c2021-04-15 15:55:55 -0500139
140For this example, check out the ``&DISTRO_NAME_NO_CAP;`` branch based on the
141``&DISTRO_NAME;`` release:
Andrew Geisslerc9f78652020-09-18 14:11:35 -0500142
143.. code-block:: shell
144
Andrew Geissler3b8a17c2021-04-15 15:55:55 -0500145 $ git checkout -t origin/&DISTRO_NAME_NO_CAP; -b my-&DISTRO_NAME_NO_CAP;
146 Branch 'my-&DISTRO_NAME_NO_CAP;' set up to track remote branch '&DISTRO_NAME_NO_CAP;' from 'origin'.
147 Switched to a new branch 'my-&DISTRO_NAME_NO_CAP;'
Andrew Geisslerc9f78652020-09-18 14:11:35 -0500148
149The previous Git checkout command creates a local branch named
Andrew Geissler3b8a17c2021-04-15 15:55:55 -0500150``my-&DISTRO_NAME_NO_CAP;``. The files available to you in that branch
151exactly match the repository's files in the ``&DISTRO_NAME_NO_CAP;``
152release branch.
153
154Note that you can regularly type the following command in the same directory
155to keep your local files in sync with the release branch:
156
157.. code-block:: shell
158
159 $ git pull
Andrew Geisslerc9f78652020-09-18 14:11:35 -0500160
161For more options and information about accessing Yocto Project related
162repositories, see the
Andrew Geissler09209ee2020-12-13 08:44:15 -0600163:ref:`dev-manual/start:locating yocto project source files`
Andrew Geisslerc9f78652020-09-18 14:11:35 -0500164section in the Yocto Project Development Tasks Manual.
165
166Building Your Image
167===================
168
169Use the following steps to build your image. The build process creates
170an entire Linux distribution, including the toolchain, from source.
171
172.. note::
173
174 - If you are working behind a firewall and your build host is not
175 set up for proxies, you could encounter problems with the build
176 process when fetching source code (e.g. fetcher failures or Git
177 failures).
178
179 - If you do not know your proxy settings, consult your local network
180 infrastructure resources and get that information. A good starting
181 point could also be to check your web browser settings. Finally,
182 you can find more information on the
Andrew Geissler09209ee2020-12-13 08:44:15 -0600183 ":yocto_wiki:`Working Behind a Network Proxy </Working_Behind_a_Network_Proxy>`"
Andrew Geisslerc9f78652020-09-18 14:11:35 -0500184 page of the Yocto Project Wiki.
185
186#. **Initialize the Build Environment:** From within the ``poky``
Andrew Geissler09209ee2020-12-13 08:44:15 -0600187 directory, run the :ref:`ref-manual/structure:\`\`oe-init-build-env\`\``
Andrew Geisslerc9f78652020-09-18 14:11:35 -0500188 environment
189 setup script to define Yocto Project's build environment on your
190 build host.
191
192 .. code-block:: shell
193
Andrew Geissler95ac1b82021-03-31 14:34:31 -0500194 $ cd poky
Andrew Geissler4c19ea12020-10-27 13:52:24 -0500195 $ source oe-init-build-env
Andrew Geisslerc9f78652020-09-18 14:11:35 -0500196 You had no conf/local.conf file. This configuration file has therefore been
197 created for you with some default values. You may wish to edit it to, for
198 example, select a different MACHINE (target hardware). See conf/local.conf
199 for more information as common configuration options are commented.
200
201 You had no conf/bblayers.conf file. This configuration file has therefore
202 been created for you with some default values. To add additional metadata
203 layers into your configuration please add entries to conf/bblayers.conf.
204
205 The Yocto Project has extensive documentation about OE including a reference
206 manual which can be found at:
Andrew Geissler95ac1b82021-03-31 14:34:31 -0500207 https://docs.yoctoproject.org
Andrew Geisslerc9f78652020-09-18 14:11:35 -0500208
209 For more information about OpenEmbedded see their website:
Patrick Williams213cb262021-08-07 19:21:33 -0500210 https://www.openembedded.org/
Andrew Geisslerc9f78652020-09-18 14:11:35 -0500211
212 ### Shell environment set up for builds. ###
213
214 You can now run 'bitbake <target>'
215
216 Common targets are:
217 core-image-minimal
Patrick Williams213cb262021-08-07 19:21:33 -0500218 core-image-full-cmdline
Andrew Geisslerc9f78652020-09-18 14:11:35 -0500219 core-image-sato
Patrick Williams213cb262021-08-07 19:21:33 -0500220 core-image-weston
Andrew Geisslerc9f78652020-09-18 14:11:35 -0500221 meta-toolchain
222 meta-ide-support
223
Andrew Geissler3b8a17c2021-04-15 15:55:55 -0500224 You can also run generated QEMU images with a command like 'runqemu qemux86-64'
Andrew Geisslerc9f78652020-09-18 14:11:35 -0500225
Patrick Williams213cb262021-08-07 19:21:33 -0500226 Other commonly useful commands are:
227 - 'devtool' and 'recipetool' handle common recipe tasks
228 - 'bitbake-layers' handles common layer tasks
229 - 'oe-pkgdata-util' handles common target package tasks
230
Andrew Geisslerc9f78652020-09-18 14:11:35 -0500231 Among other things, the script creates the :term:`Build Directory`, which is
232 ``build`` in this case and is located in the :term:`Source Directory`. After
233 the script runs, your current working directory is set to the Build
234 Directory. Later, when the build completes, the Build Directory contains all the
235 files created during the build.
236
237#. **Examine Your Local Configuration File:** When you set up the build
238 environment, a local configuration file named ``local.conf`` becomes
239 available in a ``conf`` subdirectory of the Build Directory. For this
240 example, the defaults are set to build for a ``qemux86`` target,
241 which is suitable for emulation. The package manager used is set to
242 the RPM package manager.
243
244 .. tip::
245
246 You can significantly speed up your build and guard against fetcher
247 failures by using mirrors. To use mirrors, add these lines to your
Andrew Geisslerc926e172021-05-07 16:11:35 -0500248 local.conf file in the Build directory::
Andrew Geisslerc9f78652020-09-18 14:11:35 -0500249
250 SSTATE_MIRRORS = "\
251 file://.* http://sstate.yoctoproject.org/dev/PATH;downloadfilename=PATH \n \
252 file://.* http://sstate.yoctoproject.org/&YOCTO_DOC_VERSION_MINUS_ONE;/PATH;downloadfilename=PATH \n \
253 file://.* http://sstate.yoctoproject.org/&YOCTO_DOC_VERSION;/PATH;downloadfilename=PATH \n \
254 "
255
256
257 The previous examples showed how to add sstate paths for Yocto Project
258 &YOCTO_DOC_VERSION_MINUS_ONE;, &YOCTO_DOC_VERSION;, and a development
259 area. For a complete index of sstate locations, see http://sstate.yoctoproject.org/.
260
261#. **Start the Build:** Continue with the following command to build an OS
262 image for the target, which is ``core-image-sato`` in this example:
263
264 .. code-block:: shell
265
266 $ bitbake core-image-sato
267
268 For information on using the ``bitbake`` command, see the
Andrew Geissler09209ee2020-12-13 08:44:15 -0600269 :ref:`overview-manual/concepts:bitbake` section in the Yocto Project Overview and
Patrick Williams213cb262021-08-07 19:21:33 -0500270 Concepts Manual, or see
271 :ref:`bitbake:bitbake-user-manual/bitbake-user-manual-intro:the bitbake command`
272 in the BitBake User Manual.
Andrew Geisslerc9f78652020-09-18 14:11:35 -0500273
274#. **Simulate Your Image Using QEMU:** Once this particular image is
275 built, you can start QEMU, which is a Quick EMUlator that ships with
276 the Yocto Project:
277
278 .. code-block:: shell
279
280 $ runqemu qemux86-64
281
282 If you want to learn more about running QEMU, see the
Andrew Geissler09209ee2020-12-13 08:44:15 -0600283 :ref:`dev-manual/qemu:using the quick emulator (qemu)` chapter in
Andrew Geisslerc9f78652020-09-18 14:11:35 -0500284 the Yocto Project Development Tasks Manual.
285
286#. **Exit QEMU:** Exit QEMU by either clicking on the shutdown icon or by typing
287 ``Ctrl-C`` in the QEMU transcript window from which you evoked QEMU.
288
289Customizing Your Build for Specific Hardware
290============================================
291
292So far, all you have done is quickly built an image suitable for
293emulation only. This section shows you how to customize your build for
294specific hardware by adding a hardware layer into the Yocto Project
295development environment.
296
297In general, layers are repositories that contain related sets of
298instructions and configurations that tell the Yocto Project what to do.
299Isolating related metadata into functionally specific layers facilitates
300modular development and makes it easier to reuse the layer metadata.
301
302.. note::
303
304 By convention, layer names start with the string "meta-".
305
306Follow these steps to add a hardware layer:
307
William A. Kennington IIIac69b482021-06-02 12:28:27 -0700308#. **Find a Layer:** Many hardware layers are available. The Yocto Project
Andrew Geisslerc9f78652020-09-18 14:11:35 -0500309 :yocto_git:`Source Repositories <>` has many hardware layers.
310 This example adds the
311 `meta-altera <https://github.com/kraj/meta-altera>`__ hardware layer.
312
313#. **Clone the Layer:** Use Git to make a local copy of the layer on your
314 machine. You can put the copy in the top level of the copy of the
315 Poky repository created earlier:
316
317 .. code-block:: shell
318
Andrew Geissler95ac1b82021-03-31 14:34:31 -0500319 $ cd poky
Andrew Geisslerc9f78652020-09-18 14:11:35 -0500320 $ git clone https://github.com/kraj/meta-altera.git
321 Cloning into 'meta-altera'...
322 remote: Counting objects: 25170, done.
323 remote: Compressing objects: 100% (350/350), done.
324 remote: Total 25170 (delta 645), reused 719 (delta 538), pack-reused 24219
325 Receiving objects: 100% (25170/25170), 41.02 MiB | 1.64 MiB/s, done.
326 Resolving deltas: 100% (13385/13385), done.
327 Checking connectivity... done.
328
William A. Kennington IIIac69b482021-06-02 12:28:27 -0700329 The hardware layer is now available
330 next to other layers inside the Poky reference repository on your build
Andrew Geisslerc9f78652020-09-18 14:11:35 -0500331 host as ``meta-altera`` and contains all the metadata needed to
332 support hardware from Altera, which is owned by Intel.
333
334 .. note::
335
336 It is recommended for layers to have a branch per Yocto Project release.
337 Please make sure to checkout the layer branch supporting the Yocto Project
338 release you're using.
339
340#. **Change the Configuration to Build for a Specific Machine:** The
341 :term:`MACHINE` variable in the
342 ``local.conf`` file specifies the machine for the build. For this
Andrew Geissler09036742021-06-25 14:25:14 -0500343 example, set the :term:`MACHINE` variable to ``cyclone5``. These
Andrew Geisslerc9f78652020-09-18 14:11:35 -0500344 configurations are used:
345 https://github.com/kraj/meta-altera/blob/master/conf/machine/cyclone5.conf.
346
347 .. note::
348
349 See the "Examine Your Local Configuration File" step earlier for more
350 information on configuring the build.
351
352#. **Add Your Layer to the Layer Configuration File:** Before you can use
353 a layer during a build, you must add it to your ``bblayers.conf``
354 file, which is found in the
355 :term:`Build Directory` ``conf``
356 directory.
357
358 Use the ``bitbake-layers add-layer`` command to add the layer to the
359 configuration file:
360
361 .. code-block:: shell
362
Andrew Geissler95ac1b82021-03-31 14:34:31 -0500363 $ cd poky/build
Andrew Geisslerc9f78652020-09-18 14:11:35 -0500364 $ bitbake-layers add-layer ../meta-altera
365 NOTE: Starting bitbake server...
366 Parsing recipes: 100% |##################################################################| Time: 0:00:32
367 Parsing of 918 .bb files complete (0 cached, 918 parsed). 1401 targets,
368 123 skipped, 0 masked, 0 errors.
369
370 You can find
371 more information on adding layers in the
Andrew Geissler09209ee2020-12-13 08:44:15 -0600372 :ref:`dev-manual/common-tasks:adding a layer using the \`\`bitbake-layers\`\` script`
Andrew Geisslerc9f78652020-09-18 14:11:35 -0500373 section.
374
375Completing these steps has added the ``meta-altera`` layer to your Yocto
376Project development environment and configured it to build for the
377``cyclone5`` machine.
378
379.. note::
380
381 The previous steps are for demonstration purposes only. If you were
382 to attempt to build an image for the ``cyclone5`` machine, you should
383 read the Altera ``README``.
384
385Creating Your Own General Layer
386===============================
387
388Maybe you have an application or specific set of behaviors you need to
389isolate. You can create your own general layer using the
390``bitbake-layers create-layer`` command. The tool automates layer
391creation by setting up a subdirectory with a ``layer.conf``
392configuration file, a ``recipes-example`` subdirectory that contains an
393``example.bb`` recipe, a licensing file, and a ``README``.
394
395The following commands run the tool to create a layer named
396``meta-mylayer`` in the ``poky`` directory:
397
398.. code-block:: shell
399
Andrew Geissler95ac1b82021-03-31 14:34:31 -0500400 $ cd poky
Andrew Geisslerc9f78652020-09-18 14:11:35 -0500401 $ bitbake-layers create-layer meta-mylayer
402 NOTE: Starting bitbake server...
403 Add your new layer with 'bitbake-layers add-layer meta-mylayer'
404
405For more information
406on layers and how to create them, see the
Andrew Geissler09209ee2020-12-13 08:44:15 -0600407:ref:`dev-manual/common-tasks:creating a general layer using the \`\`bitbake-layers\`\` script`
Andrew Geisslerc9f78652020-09-18 14:11:35 -0500408section in the Yocto Project Development Tasks Manual.
409
410Where To Go Next
411================
412
413Now that you have experienced using the Yocto Project, you might be
414asking yourself "What now?". The Yocto Project has many sources of
415information including the website, wiki pages, and user manuals:
416
417- **Website:** The :yocto_home:`Yocto Project Website <>` provides
418 background information, the latest builds, breaking news, full
419 development documentation, and access to a rich Yocto Project
420 Development Community into which you can tap.
421
422- **Developer Screencast:** The `Getting Started with the Yocto Project -
Andrew Geisslerd1e89492021-02-12 15:35:20 -0600423 New Developer Screencast Tutorial <https://vimeo.com/36450321>`__
Andrew Geisslerc9f78652020-09-18 14:11:35 -0500424 provides a 30-minute video created for users unfamiliar with the
425 Yocto Project but familiar with Linux build hosts. While this
426 screencast is somewhat dated, the introductory and fundamental
427 concepts are useful for the beginner.
428
429- **Yocto Project Overview and Concepts Manual:** The
Andrew Geissler09209ee2020-12-13 08:44:15 -0600430 :doc:`/overview-manual/index` is a great
Andrew Geisslerc9f78652020-09-18 14:11:35 -0500431 place to start to learn about the Yocto Project. This manual
432 introduces you to the Yocto Project and its development environment.
433 The manual also provides conceptual information for various aspects
434 of the Yocto Project.
435
436- **Yocto Project Wiki:** The :yocto_wiki:`Yocto Project Wiki <>`
437 provides additional information on where to go next when ramping up
438 with the Yocto Project, release information, project planning, and QA
439 information.
440
441- **Yocto Project Mailing Lists:** Related mailing lists provide a forum
William A. Kennington IIIac69b482021-06-02 12:28:27 -0700442 for discussion, patch submission and announcements. There are several
443 mailing lists grouped by topic. See the
Andrew Geisslerc9f78652020-09-18 14:11:35 -0500444 :ref:`ref-manual/resources:mailing lists`
445 section in the Yocto Project Reference Manual for a complete list of
446 Yocto Project mailing lists.
447
448- **Comprehensive List of Links and Other Documentation:** The
449 :ref:`ref-manual/resources:links and related documentation`
450 section in the Yocto Project Reference Manual provides a
451 comprehensive list of all related links and other user documentation.
452
453.. include:: /boilerplate.rst