blob: 06388b72fb4e1fab8a4b6db1e46ec8abddb7891d [file] [log] [blame]
Patrick Williams92b42cb2022-09-03 06:53:57 -05001#
2# Copyright OpenEmbedded Contributors
3#
4# SPDX-License-Identifier: MIT
5#
6
7# Zap the root password if debug-tweaks and empty-root-password features are not enabled
Andrew Geissler5082cc72023-09-11 08:41:39 -04008ROOTFS_POSTPROCESS_COMMAND += '${@bb.utils.contains_any("IMAGE_FEATURES", [ 'debug-tweaks', 'empty-root-password' ], "", "zap_empty_root_password ",d)}'
Patrick Williams92b42cb2022-09-03 06:53:57 -05009
10# Allow dropbear/openssh to accept logins from accounts with an empty password string if debug-tweaks or allow-empty-password is enabled
Andrew Geissler5082cc72023-09-11 08:41:39 -040011ROOTFS_POSTPROCESS_COMMAND += '${@bb.utils.contains_any("IMAGE_FEATURES", [ 'debug-tweaks', 'allow-empty-password' ], "ssh_allow_empty_password ", "",d)}'
Patrick Williams92b42cb2022-09-03 06:53:57 -050012
13# Allow dropbear/openssh to accept root logins if debug-tweaks or allow-root-login is enabled
Andrew Geissler5082cc72023-09-11 08:41:39 -040014ROOTFS_POSTPROCESS_COMMAND += '${@bb.utils.contains_any("IMAGE_FEATURES", [ 'debug-tweaks', 'allow-root-login' ], "ssh_allow_root_login ", "",d)}'
Patrick Williams92b42cb2022-09-03 06:53:57 -050015
16# Autologin the root user on the serial console, if empty-root-password and serial-autologin-root are active
Andrew Geissler5082cc72023-09-11 08:41:39 -040017ROOTFS_POSTPROCESS_COMMAND += '${@bb.utils.contains("IMAGE_FEATURES", [ 'empty-root-password', 'serial-autologin-root' ], "serial_autologin_root ", "",d)}'
Patrick Williams92b42cb2022-09-03 06:53:57 -050018
19# Enable postinst logging if debug-tweaks or post-install-logging is enabled
Andrew Geissler5082cc72023-09-11 08:41:39 -040020ROOTFS_POSTPROCESS_COMMAND += '${@bb.utils.contains_any("IMAGE_FEATURES", [ 'debug-tweaks', 'post-install-logging' ], "postinst_enable_logging ", "",d)}'
Patrick Williams92b42cb2022-09-03 06:53:57 -050021
22# Create /etc/timestamp during image construction to give a reasonably sane default time setting
Andrew Geissler5082cc72023-09-11 08:41:39 -040023ROOTFS_POSTPROCESS_COMMAND += "rootfs_update_timestamp "
Patrick Williams92b42cb2022-09-03 06:53:57 -050024
Andrew Geissler87f5cff2022-09-30 13:13:31 -050025# Tweak files in /etc if read-only-rootfs is enabled
Andrew Geissler5082cc72023-09-11 08:41:39 -040026ROOTFS_POSTPROCESS_COMMAND += '${@bb.utils.contains("IMAGE_FEATURES", "read-only-rootfs", "read_only_rootfs_hook ", "",d)}'
Patrick Williams92b42cb2022-09-03 06:53:57 -050027
28# We also need to do the same for the kernel boot parameters,
29# otherwise kernel or initramfs end up mounting the rootfs read/write
30# (the default) if supported by the underlying storage.
31#
32# We do this with :append because the default value might get set later with ?=
33# and we don't want to disable such a default that by setting a value here.
34APPEND:append = '${@bb.utils.contains("IMAGE_FEATURES", "read-only-rootfs", " ro", "", d)}'
35
36# Generates test data file with data store variables expanded in json format
Andrew Geissler5082cc72023-09-11 08:41:39 -040037ROOTFS_POSTPROCESS_COMMAND += "write_image_test_data "
Patrick Williams92b42cb2022-09-03 06:53:57 -050038
39# Write manifest
Andrew Geissler8f840682023-07-21 09:09:43 -050040IMAGE_MANIFEST = "${IMGDEPLOYDIR}/${IMAGE_NAME}.manifest"
Andrew Geissler5082cc72023-09-11 08:41:39 -040041ROOTFS_POSTUNINSTALL_COMMAND =+ "write_image_manifest"
Patrick Williams92b42cb2022-09-03 06:53:57 -050042# Set default postinst log file
43POSTINST_LOGFILE ?= "${localstatedir}/log/postinstall.log"
44# Set default target for systemd images
45SYSTEMD_DEFAULT_TARGET ?= '${@bb.utils.contains_any("IMAGE_FEATURES", [ "x11-base", "weston" ], "graphical.target", "multi-user.target", d)}'
Andrew Geissler5082cc72023-09-11 08:41:39 -040046ROOTFS_POSTPROCESS_COMMAND += '${@bb.utils.contains("DISTRO_FEATURES", "systemd", "set_systemd_default_target systemd_sysusers_check", "", d)}'
Patrick Williams92b42cb2022-09-03 06:53:57 -050047
Andrew Geissler5082cc72023-09-11 08:41:39 -040048ROOTFS_POSTPROCESS_COMMAND += 'empty_var_volatile'
Patrick Williams92b42cb2022-09-03 06:53:57 -050049
Andrew Geissler5082cc72023-09-11 08:41:39 -040050ROOTFS_POSTPROCESS_COMMAND += '${@bb.utils.contains("DISTRO_FEATURES", "overlayfs", "overlayfs_qa_check overlayfs_postprocess", "", d)}'
Patrick Williams92b42cb2022-09-03 06:53:57 -050051
52inherit image-artifact-names
53
54# Sort the user and group entries in /etc by ID in order to make the content
55# deterministic. Package installs are not deterministic, causing the ordering
56# of entries to change between builds. In case that this isn't desired,
57# the command can be overridden.
58#
59# Note that useradd-staticids.bbclass has to be used to ensure that
60# the numeric IDs of dynamically created entries remain stable.
61#
62# We want this to run as late as possible, in particular after
63# systemd_sysusers_create and set_user_group. Using :append is not
64# enough for that, set_user_group is added that way and would end
65# up running after us.
Andrew Geissler5082cc72023-09-11 08:41:39 -040066SORT_PASSWD_POSTPROCESS_COMMAND ??= "tidy_shadowutils_files"
Patrick Williams92b42cb2022-09-03 06:53:57 -050067python () {
Andrew Geissler5082cc72023-09-11 08:41:39 -040068 d.appendVar('ROOTFS_POSTPROCESS_COMMAND', ' ${SORT_PASSWD_POSTPROCESS_COMMAND}')
69 d.appendVar('ROOTFS_POSTPROCESS_COMMAND', ' rootfs_reproducible')
Patrick Williams92b42cb2022-09-03 06:53:57 -050070}
71
Patrick Williams520786c2023-06-25 16:20:36 -050072# Resolve the ID as described in the sysusers.d(5) manual: ID can be a numeric
73# uid, a couple uid:gid or uid:groupname or it is '-' meaning leaving it
74# automatic or it can be a path. In the latter, the uid/gid matches the
75# user/group owner of that file.
76def resolve_sysusers_id(d, sid):
77 # If the id is a path, the uid/gid matchs to the target's uid/gid in the
78 # rootfs.
79 if '/' in sid:
80 try:
81 osstat = os.stat(os.path.join(d.getVar('IMAGE_ROOTFS'), sid))
82 except FileNotFoundError:
83 bb.error('sysusers.d: file %s is required but it does not exist in the rootfs', sid)
84 return ('-', '-')
85 return (osstat.st_uid, osstat.st_gid)
86 # Else it is a uid:gid or uid:groupname syntax
87 if ':' in sid:
88 return sid.split(':')
89 else:
90 return (sid, '-')
91
92# Check a user exists in the rootfs password file and return its properties
93def check_user_exists(d, uname=None, uid=None):
94 with open(os.path.join(d.getVar('IMAGE_ROOTFS'), 'etc/passwd'), 'r') as pwfile:
95 for line in pwfile:
96 (name, _, u_id, gid, comment, homedir, ushell) = line.strip().split(':')
97 if uname == name or uid == u_id:
98 return (name, u_id, gid, comment or '-', homedir or '/', ushell or '-')
99 return None
100
101# Check a group exists in the rootfs group file and return its properties
102def check_group_exists(d, gname=None, gid=None):
103 with open(os.path.join(d.getVar('IMAGE_ROOTFS'), 'etc/group'), 'r') as gfile:
104 for line in gfile:
105 (name, _, g_id, _) = line.strip().split(':')
106 if name == gname or g_id == gid:
107 return (name, g_id)
108 return None
109
110def compare_users(user, e_user):
111 # user and e_user must not have None values. Unset values must be '-'.
112 (name, uid, gid, comment, homedir, ushell) = user
113 (e_name, e_uid, e_gid, e_comment, e_homedir, e_ushell) = e_user
114 # Ignore 'uid', 'gid' or 'comment' if they are not set
115 # Ignore 'shell' and 'ushell' if one is not set
116 return name == e_name \
117 and (uid == '-' or uid == e_uid) \
118 and (gid == '-' or gid == e_gid) \
119 and (comment == '-' or e_comment == '-' or comment.lower() == e_comment.lower()) \
120 and (homedir == '-' or e_homedir == '-' or homedir == e_homedir) \
121 and (ushell == '-' or e_ushell == '-' or ushell == e_ushell)
122
123# Open sysusers.d configuration files and parse each line to check the users and
124# groups are already defined in /etc/passwd and /etc/groups with similar
125# properties. Refer to the sysusers.d(5) manual for its syntax.
126python systemd_sysusers_check() {
127 import glob
128 import re
129
130 pattern_comment = r'(-|\"[^:\"]+\")'
131 pattern_word = r'[^\s]+'
132 pattern_line = r'(' + pattern_word + r')\s+(' + pattern_word + r')\s+(' + pattern_word + r')(\s+' \
133 + pattern_comment + r')?' + r'(\s+(' + pattern_word + r'))?' + r'(\s+(' + pattern_word + r'))?'
134
135 for conffile in glob.glob(os.path.join(d.getVar('IMAGE_ROOTFS'), 'usr/lib/sysusers.d/*.conf')):
136 with open(conffile, 'r') as f:
137 for line in f:
138 line = line.strip()
139 if not len(line) or line[0] == '#': continue
140 ret = re.fullmatch(pattern_line, line.strip())
141 if not ret: continue
142 (stype, sname, sid, _, scomment, _, shomedir, _, sshell) = ret.groups()
143 if stype == 'u':
144 if sid:
145 (suid, sgid) = resolve_sysusers_id(d, sid)
146 if sgid.isalpha():
147 sgid = check_group_exists(d, gname=sgid)
148 elif sgid.isdigit():
149 check_group_exists(d, gid=sgid)
150 else:
151 sgid = '-'
152 else:
153 suid = '-'
154 sgid = '-'
155 scomment = scomment.replace('"', '') if scomment else '-'
156 shomedir = shomedir or '-'
157 sshell = sshell or '-'
158 e_user = check_user_exists(d, uname=sname)
159 if not e_user:
160 bb.warn('User %s has never been defined' % sname)
161 elif not compare_users((sname, suid, sgid, scomment, shomedir, sshell), e_user):
162 bb.warn('User %s has been defined as (%s) but sysusers.d expects it as (%s)'
163 % (sname, ', '.join(e_user),
164 ', '.join((sname, suid, sgid, scomment, shomedir, sshell))))
165 elif stype == 'g':
166 gid = sid or '-'
167 if '/' in gid:
168 (_, gid) = resolve_sysusers_id(d, sid)
169 e_group = check_group_exists(d, gname=sname)
170 if not e_group:
171 bb.warn('Group %s has never been defined' % sname)
172 elif gid != '-':
173 (_, e_gid) = e_group
174 if gid != e_gid:
175 bb.warn('Group %s has been defined with id (%s) but sysusers.d expects gid (%s)'
176 % (sname, e_gid, gid))
177 elif stype == 'm':
178 check_user_exists(d, sname)
179 check_group_exists(d, sid)
Patrick Williams92b42cb2022-09-03 06:53:57 -0500180}
181
182#
183# A hook function to support read-only-rootfs IMAGE_FEATURES
184#
185read_only_rootfs_hook () {
186 # Tweak the mount option and fs_passno for rootfs in fstab
187 if [ -f ${IMAGE_ROOTFS}/etc/fstab ]; then
188 sed -i -e '/^[#[:space:]]*\/dev\/root/{s/defaults/ro/;s/\([[:space:]]*[[:digit:]]\)\([[:space:]]*\)[[:digit:]]$/\1\20/}' ${IMAGE_ROOTFS}/etc/fstab
189 fi
190
191 # Tweak the "mount -o remount,rw /" command in busybox-inittab inittab
192 if [ -f ${IMAGE_ROOTFS}/etc/inittab ]; then
193 sed -i 's|/bin/mount -o remount,rw /|/bin/mount -o remount,ro /|' ${IMAGE_ROOTFS}/etc/inittab
194 fi
195
196 # If we're using openssh and the /etc/ssh directory has no pre-generated keys,
197 # we should configure openssh to use the configuration file /etc/ssh/sshd_config_readonly
198 # and the keys under /var/run/ssh.
Andrew Geissler87f5cff2022-09-30 13:13:31 -0500199 # If overlayfs-etc is used this is not done as /etc is treated as writable
200 # If stateless-rootfs is enabled this is always done as we don't want to save keys then
201 if ${@ 'true' if not bb.utils.contains('IMAGE_FEATURES', 'overlayfs-etc', True, False, d) or bb.utils.contains('IMAGE_FEATURES', 'stateless-rootfs', True, False, d) else 'false'}; then
202 if [ -d ${IMAGE_ROOTFS}/etc/ssh ]; then
203 if [ -e ${IMAGE_ROOTFS}/etc/ssh/ssh_host_rsa_key ]; then
204 echo "SYSCONFDIR=\${SYSCONFDIR:-/etc/ssh}" >> ${IMAGE_ROOTFS}/etc/default/ssh
205 echo "SSHD_OPTS=" >> ${IMAGE_ROOTFS}/etc/default/ssh
206 else
207 echo "SYSCONFDIR=\${SYSCONFDIR:-/var/run/ssh}" >> ${IMAGE_ROOTFS}/etc/default/ssh
208 echo "SSHD_OPTS='-f /etc/ssh/sshd_config_readonly'" >> ${IMAGE_ROOTFS}/etc/default/ssh
209 fi
Patrick Williams92b42cb2022-09-03 06:53:57 -0500210 fi
Patrick Williams92b42cb2022-09-03 06:53:57 -0500211
Andrew Geissler87f5cff2022-09-30 13:13:31 -0500212 # Also tweak the key location for dropbear in the same way.
213 if [ -d ${IMAGE_ROOTFS}/etc/dropbear ]; then
214 if [ ! -e ${IMAGE_ROOTFS}/etc/dropbear/dropbear_rsa_host_key ]; then
215 echo "DROPBEAR_RSAKEY_DIR=/var/lib/dropbear" >> ${IMAGE_ROOTFS}/etc/default/dropbear
216 fi
Patrick Williams92b42cb2022-09-03 06:53:57 -0500217 fi
218 fi
219
220 if ${@bb.utils.contains("DISTRO_FEATURES", "sysvinit", "true", "false", d)}; then
221 # Change the value of ROOTFS_READ_ONLY in /etc/default/rcS to yes
222 if [ -e ${IMAGE_ROOTFS}/etc/default/rcS ]; then
223 sed -i 's/ROOTFS_READ_ONLY=no/ROOTFS_READ_ONLY=yes/' ${IMAGE_ROOTFS}/etc/default/rcS
224 fi
225 # Run populate-volatile.sh at rootfs time to set up basic files
226 # and directories to support read-only rootfs.
227 if [ -x ${IMAGE_ROOTFS}/etc/init.d/populate-volatile.sh ]; then
228 ${IMAGE_ROOTFS}/etc/init.d/populate-volatile.sh
229 fi
230 fi
231
232 if ${@bb.utils.contains("DISTRO_FEATURES", "systemd", "true", "false", d)}; then
233 # Create machine-id
234 # 20:12 < mezcalero> koen: you have three options: a) run systemd-machine-id-setup at install time, b) have / read-only and an empty file there (for stateless) and c) boot with / writable
235 touch ${IMAGE_ROOTFS}${sysconfdir}/machine-id
236 fi
237}
238
239#
240# This function disallows empty root passwords
241#
242zap_empty_root_password () {
243 if [ -e ${IMAGE_ROOTFS}/etc/shadow ]; then
244 sed -i 's%^root::%root:*:%' ${IMAGE_ROOTFS}/etc/shadow
245 fi
246 if [ -e ${IMAGE_ROOTFS}/etc/passwd ]; then
247 sed -i 's%^root::%root:*:%' ${IMAGE_ROOTFS}/etc/passwd
248 fi
249}
250
251#
252# allow dropbear/openssh to accept logins from accounts with an empty password string
253#
254ssh_allow_empty_password () {
255 for config in sshd_config sshd_config_readonly; do
256 if [ -e ${IMAGE_ROOTFS}${sysconfdir}/ssh/$config ]; then
257 sed -i 's/^[#[:space:]]*PermitEmptyPasswords.*/PermitEmptyPasswords yes/' ${IMAGE_ROOTFS}${sysconfdir}/ssh/$config
258 fi
259 done
260
261 if [ -e ${IMAGE_ROOTFS}${sbindir}/dropbear ] ; then
262 if grep -q DROPBEAR_EXTRA_ARGS ${IMAGE_ROOTFS}${sysconfdir}/default/dropbear 2>/dev/null ; then
263 if ! grep -q "DROPBEAR_EXTRA_ARGS=.*-B" ${IMAGE_ROOTFS}${sysconfdir}/default/dropbear ; then
264 sed -i 's/^DROPBEAR_EXTRA_ARGS="*\([^"]*\)"*/DROPBEAR_EXTRA_ARGS="\1 -B"/' ${IMAGE_ROOTFS}${sysconfdir}/default/dropbear
265 fi
266 else
267 printf '\nDROPBEAR_EXTRA_ARGS="-B"\n' >> ${IMAGE_ROOTFS}${sysconfdir}/default/dropbear
268 fi
269 fi
270
271 if [ -d ${IMAGE_ROOTFS}${sysconfdir}/pam.d ] ; then
272 for f in `find ${IMAGE_ROOTFS}${sysconfdir}/pam.d/* -type f -exec test -e {} \; -print`
273 do
274 sed -i 's/nullok_secure/nullok/' $f
275 done
276 fi
277}
278
279#
280# allow dropbear/openssh to accept root logins
281#
282ssh_allow_root_login () {
283 for config in sshd_config sshd_config_readonly; do
284 if [ -e ${IMAGE_ROOTFS}${sysconfdir}/ssh/$config ]; then
285 sed -i 's/^[#[:space:]]*PermitRootLogin.*/PermitRootLogin yes/' ${IMAGE_ROOTFS}${sysconfdir}/ssh/$config
286 fi
287 done
288
289 if [ -e ${IMAGE_ROOTFS}${sbindir}/dropbear ] ; then
290 if grep -q DROPBEAR_EXTRA_ARGS ${IMAGE_ROOTFS}${sysconfdir}/default/dropbear 2>/dev/null ; then
291 sed -i '/^DROPBEAR_EXTRA_ARGS=/ s/-w//' ${IMAGE_ROOTFS}${sysconfdir}/default/dropbear
Andrew Geissler87f5cff2022-09-30 13:13:31 -0500292 sed -i '/^# Disallow root/d' ${IMAGE_ROOTFS}${sysconfdir}/default/dropbear
Patrick Williams92b42cb2022-09-03 06:53:57 -0500293 fi
294 fi
295}
296
297#
298# Autologin the 'root' user on the serial terminal,
299# if empty-root-password' AND 'serial-autologin-root are enabled
300#
301serial_autologin_root () {
302 if ${@bb.utils.contains("DISTRO_FEATURES", "sysvinit", "true", "false", d)}; then
303 # add autologin option to util-linux getty only
304 sed -i 's/options="/&--autologin root /' \
305 "${IMAGE_ROOTFS}${base_bindir}/start_getty"
306 elif ${@bb.utils.contains("DISTRO_FEATURES", "systemd", "true", "false", d)}; then
307 if [ -e ${IMAGE_ROOTFS}${systemd_system_unitdir}/serial-getty@.service ]; then
308 sed -i '/^\s*ExecStart\b/ s/getty /&--autologin root /' \
309 "${IMAGE_ROOTFS}${systemd_system_unitdir}/serial-getty@.service"
310 fi
311 fi
312}
313
314python tidy_shadowutils_files () {
315 import rootfspostcommands
316 rootfspostcommands.tidy_shadowutils_files(d.expand('${IMAGE_ROOTFS}${sysconfdir}'))
317}
318
319python sort_passwd () {
320 """
321 Deprecated in the favour of tidy_shadowutils_files.
322 """
323 import rootfspostcommands
324 bb.warn('[sort_passwd] You are using a deprecated function for '
325 'SORT_PASSWD_POSTPROCESS_COMMAND. The default one is now called '
326 '"tidy_shadowutils_files".')
327 rootfspostcommands.tidy_shadowutils_files(d.expand('${IMAGE_ROOTFS}${sysconfdir}'))
328}
329
330#
331# Enable postinst logging
332#
333postinst_enable_logging () {
334 mkdir -p ${IMAGE_ROOTFS}${sysconfdir}/default
335 echo "POSTINST_LOGGING=1" >> ${IMAGE_ROOTFS}${sysconfdir}/default/postinst
336 echo "LOGFILE=${POSTINST_LOGFILE}" >> ${IMAGE_ROOTFS}${sysconfdir}/default/postinst
337}
338
339#
340# Modify systemd default target
341#
342set_systemd_default_target () {
343 if [ -d ${IMAGE_ROOTFS}${sysconfdir}/systemd/system -a -e ${IMAGE_ROOTFS}${systemd_system_unitdir}/${SYSTEMD_DEFAULT_TARGET} ]; then
344 ln -sf ${systemd_system_unitdir}/${SYSTEMD_DEFAULT_TARGET} ${IMAGE_ROOTFS}${sysconfdir}/systemd/system/default.target
345 fi
346}
347
348# If /var/volatile is not empty, we have seen problems where programs such as the
349# journal make assumptions based on the contents of /var/volatile. The journal
350# would then write to /var/volatile before it was mounted, thus hiding the
351# items previously written.
352#
353# This change is to attempt to fix those types of issues in a way that doesn't
354# affect users that may not be using /var/volatile.
355empty_var_volatile () {
356 if [ -e ${IMAGE_ROOTFS}/etc/fstab ]; then
357 match=`awk '$1 !~ "#" && $2 ~ /\/var\/volatile/{print $2}' ${IMAGE_ROOTFS}/etc/fstab 2> /dev/null`
358 if [ -n "$match" ]; then
359 find ${IMAGE_ROOTFS}/var/volatile -mindepth 1 -delete
360 fi
361 fi
362}
363
364# Turn any symbolic /sbin/init link into a file
365remove_init_link () {
366 if [ -h ${IMAGE_ROOTFS}/sbin/init ]; then
367 LINKFILE=${IMAGE_ROOTFS}`readlink ${IMAGE_ROOTFS}/sbin/init`
368 rm ${IMAGE_ROOTFS}/sbin/init
369 cp $LINKFILE ${IMAGE_ROOTFS}/sbin/init
370 fi
371}
372
373make_zimage_symlink_relative () {
374 if [ -L ${IMAGE_ROOTFS}/boot/zImage ]; then
375 (cd ${IMAGE_ROOTFS}/boot/ && for i in `ls zImage-* | sort`; do ln -sf $i zImage; done)
376 fi
377}
378
379python write_image_manifest () {
380 from oe.rootfs import image_list_installed_packages
381 from oe.utils import format_pkg_list
382
383 deploy_dir = d.getVar('IMGDEPLOYDIR')
384 link_name = d.getVar('IMAGE_LINK_NAME')
385 manifest_name = d.getVar('IMAGE_MANIFEST')
386
387 if not manifest_name:
388 return
389
390 pkgs = image_list_installed_packages(d)
391 with open(manifest_name, 'w+') as image_manifest:
392 image_manifest.write(format_pkg_list(pkgs, "ver"))
393
394 if os.path.exists(manifest_name) and link_name:
395 manifest_link = deploy_dir + "/" + link_name + ".manifest"
396 if manifest_link != manifest_name:
397 if os.path.lexists(manifest_link):
398 os.remove(manifest_link)
399 os.symlink(os.path.basename(manifest_name), manifest_link)
400}
401
402# Can be used to create /etc/timestamp during image construction to give a reasonably
403# sane default time setting
404rootfs_update_timestamp () {
405 if [ "${REPRODUCIBLE_TIMESTAMP_ROOTFS}" != "" ]; then
406 # Convert UTC into %4Y%2m%2d%2H%2M%2S
407 sformatted=`date -u -d @${REPRODUCIBLE_TIMESTAMP_ROOTFS} +%4Y%2m%2d%2H%2M%2S`
408 else
409 sformatted=`date -u +%4Y%2m%2d%2H%2M%2S`
410 fi
411 echo $sformatted > ${IMAGE_ROOTFS}/etc/timestamp
412 bbnote "rootfs_update_timestamp: set /etc/timestamp to $sformatted"
413}
414
415# Prevent X from being started
416rootfs_no_x_startup () {
417 if [ -f ${IMAGE_ROOTFS}/etc/init.d/xserver-nodm ]; then
418 chmod a-x ${IMAGE_ROOTFS}/etc/init.d/xserver-nodm
419 fi
420}
421
422rootfs_trim_schemas () {
423 for schema in ${IMAGE_ROOTFS}/etc/gconf/schemas/*.schemas
424 do
425 # Need this in case no files exist
426 if [ -e $schema ]; then
427 oe-trim-schemas $schema > $schema.new
428 mv $schema.new $schema
429 fi
430 done
431}
432
433rootfs_check_host_user_contaminated () {
434 contaminated="${S}/host-user-contaminated.txt"
435 HOST_USER_UID="$(PSEUDO_UNLOAD=1 id -u)"
436 HOST_USER_GID="$(PSEUDO_UNLOAD=1 id -g)"
437
438 find "${IMAGE_ROOTFS}" -path "${IMAGE_ROOTFS}/home" -prune -o \
439 -user "$HOST_USER_UID" -print -o -group "$HOST_USER_GID" -print >"$contaminated"
440
441 sed -e "s,${IMAGE_ROOTFS},," $contaminated | while read line; do
442 bbwarn "Path in the rootfs is owned by the same user or group as the user running bitbake:" $line `ls -lan ${IMAGE_ROOTFS}/$line`
443 done
444
445 if [ -s "$contaminated" ]; then
446 bbwarn "/etc/passwd:" `cat ${IMAGE_ROOTFS}/etc/passwd`
447 bbwarn "/etc/group:" `cat ${IMAGE_ROOTFS}/etc/group`
448 fi
449}
450
451# Make any absolute links in a sysroot relative
452rootfs_sysroot_relativelinks () {
453 sysroot-relativelinks.py ${SDK_OUTPUT}/${SDKTARGETSYSROOT}
454}
455
456# Generated test data json file
457python write_image_test_data() {
458 from oe.data import export2json
459
460 deploy_dir = d.getVar('IMGDEPLOYDIR')
461 link_name = d.getVar('IMAGE_LINK_NAME')
462 testdata_name = os.path.join(deploy_dir, "%s.testdata.json" % d.getVar('IMAGE_NAME'))
463
464 searchString = "%s/"%(d.getVar("TOPDIR")).replace("//","/")
465 export2json(d, testdata_name, searchString=searchString, replaceString="")
466
467 if os.path.exists(testdata_name) and link_name:
468 testdata_link = os.path.join(deploy_dir, "%s.testdata.json" % link_name)
469 if testdata_link != testdata_name:
470 if os.path.lexists(testdata_link):
471 os.remove(testdata_link)
472 os.symlink(os.path.basename(testdata_name), testdata_link)
473}
474write_image_test_data[vardepsexclude] += "TOPDIR"
475
476# Check for unsatisfied recommendations (RRECOMMENDS)
477python rootfs_log_check_recommends() {
478 log_path = d.expand("${T}/log.do_rootfs")
479 with open(log_path, 'r') as log:
480 for line in log:
481 if 'log_check' in line:
482 continue
483
484 if 'unsatisfied recommendation for' in line:
485 bb.warn('[log_check] %s: %s' % (d.getVar('PN'), line))
486}
487
488# Perform any additional adjustments needed to make rootf binary reproducible
489rootfs_reproducible () {
490 if [ "${REPRODUCIBLE_TIMESTAMP_ROOTFS}" != "" ]; then
491 # Convert UTC into %4Y%2m%2d%2H%2M%2S
492 sformatted=`date -u -d @${REPRODUCIBLE_TIMESTAMP_ROOTFS} +%4Y%2m%2d%2H%2M%2S`
493 echo $sformatted > ${IMAGE_ROOTFS}/etc/version
494 bbnote "rootfs_reproducible: set /etc/version to $sformatted"
495
496 if [ -d ${IMAGE_ROOTFS}${sysconfdir}/gconf ]; then
497 find ${IMAGE_ROOTFS}${sysconfdir}/gconf -name '%gconf.xml' -print0 | xargs -0r \
498 sed -i -e 's@\bmtime="[0-9][0-9]*"@mtime="'${REPRODUCIBLE_TIMESTAMP_ROOTFS}'"@g'
499 fi
500 fi
501}
502
503# Perform a dumb check for unit existence, not its validity
504python overlayfs_qa_check() {
505 from oe.overlayfs import mountUnitName
506
507 overlayMountPoints = d.getVarFlags("OVERLAYFS_MOUNT_POINT") or {}
508 imagepath = d.getVar("IMAGE_ROOTFS")
509 sysconfdir = d.getVar("sysconfdir")
510 searchpaths = [oe.path.join(imagepath, sysconfdir, "systemd", "system"),
511 oe.path.join(imagepath, d.getVar("systemd_system_unitdir"))]
512 fstabpath = oe.path.join(imagepath, sysconfdir, "fstab")
513
514 if not any(os.path.exists(path) for path in [*searchpaths, fstabpath]):
515 return
516
517 fstabDevices = []
518 if os.path.isfile(fstabpath):
519 with open(fstabpath, 'r') as f:
520 for line in f:
521 if line[0] == '#':
522 continue
523 path = line.split(maxsplit=2)
524 if len(path) > 2:
525 fstabDevices.append(path[1])
526
527 allUnitExist = True;
528 for mountPoint in overlayMountPoints:
529 qaSkip = (d.getVarFlag("OVERLAYFS_QA_SKIP", mountPoint) or "").split()
530 if "mount-configured" in qaSkip:
531 continue
532
533 mountPath = d.getVarFlag('OVERLAYFS_MOUNT_POINT', mountPoint)
534 if mountPath in fstabDevices:
535 continue
536
537 mountUnit = mountUnitName(mountPath)
538 if any(os.path.isfile(oe.path.join(dirpath, mountUnit))
539 for dirpath in searchpaths):
540 continue
541
542 bb.warn(f'Mount path {mountPath} not found in fstab and unit '
543 f'{mountUnit} not found in systemd unit directories.')
544 bb.warn(f'Skip this check by setting OVERLAYFS_QA_SKIP[{mountPoint}] = '
545 '"mount-configured"')
546 allUnitExist = False;
547
548 if not allUnitExist:
549 bb.fatal('Not all mount paths and units are installed in the image')
550}
551
552python overlayfs_postprocess() {
553 import shutil
554
555 # install helper script
556 helperScriptName = "overlayfs-create-dirs.sh"
557 helperScriptSource = oe.path.join(d.getVar("COREBASE"), "meta/files", helperScriptName)
558 helperScriptDest = oe.path.join(d.getVar("IMAGE_ROOTFS"), "/usr/sbin/", helperScriptName)
559 shutil.copyfile(helperScriptSource, helperScriptDest)
560 os.chmod(helperScriptDest, 0o755)
561}