meta-facebook/meta-bletchley/recipes-bletchley/plat-svc/files/bletchley-host-state-monitor

#!/bin/bash

export PATH=$PATH:/usr/sbin:/usr/libexec

# shellcheck source=meta-facebook/meta-bletchley/recipes-bletchley/plat-tools/files/bletchley-common-functions
source /usr/libexec/bletchley-common-functions

MDIO_TOOL="/usr/sbin/mdio"
SWITCH_MDIO_BUS="1e650000.mdio-1"

declare -a PORT_NUM_MAP=(10 3 2 1 7 6 5)

declare -a HOST_PREVIOUS_STATE=("" "" "" "" "" "" "")
declare -a HOST_NEW_STATE_TEMP=("" "" "" "" "" "" "")
declare -a HOST_STATE_CHANGE_CHECK=(0 0 0 0 0 0 0)
HOST_STATE_CHANGE_CHECH_CNT=8

declare -A HOST_ACPI_ST_MAP
HOST_ACPI_ST_MAP["UNKNOW"]="Unknow"
HOST_ACPI_ST_MAP["NOT_PRESENT"]="G3"
HOST_ACPI_ST_MAP["AC_OFF"]="G3"
HOST_ACPI_ST_MAP["OFF"]="G3"
HOST_ACPI_ST_MAP["SLEEP"]="SLEEP"
HOST_ACPI_ST_MAP["ON"]="S0_G0_D0"

declare -A HOST_STATE_MAP
HOST_STATE_MAP["UNKNOW"]="Quiesced"
HOST_STATE_MAP["NOT_PRESENT"]="Off"
HOST_STATE_MAP["AC_OFF"]="Off"
HOST_STATE_MAP["OFF"]="Off"
HOST_STATE_MAP["SLEEP"]="Standby"
HOST_STATE_MAP["ON"]="Running"

declare -A CHASSIS_PWR_STATE_MAP
CHASSIS_PWR_STATE_MAP["UNKNOW"]="On"
CHASSIS_PWR_STATE_MAP["NOT_PRESENT"]="Off"
CHASSIS_PWR_STATE_MAP["AC_OFF"]="Off"
CHASSIS_PWR_STATE_MAP["OFF"]="On"
CHASSIS_PWR_STATE_MAP["SLEEP"]="On"
CHASSIS_PWR_STATE_MAP["ON"]="On"

is_host_ac_on()
{
    local HOST_ID=$1
    local I2C_BUS
    local P1_OUTPUT_REG
    local P1_CONFIG_REG
    local HOST_PWR
    local IS_OUTPUT

    I2C_BUS=$((HOST_ID-1))
    P1_OUTPUT_REG=$(i2cget -f -y "$I2C_BUS" 0x76 0x03)
    P1_CONFIG_REG=$(i2cget -f -y "$I2C_BUS" 0x76 0x07)
    HOST_PWR="$(( (P1_OUTPUT_REG & 0x80)>>7 ))"
    IS_OUTPUT="$(( (~P1_CONFIG_REG & 0x80)>>7 ))"

    if [ "$((HOST_PWR & IS_OUTPUT))" -eq 1 ];then
        return 0
    fi

    return 1
}

update_host_acpi_power_state()
{
    local BUS_NAME="xyz.openbmc_project.Settings"
    local OBJ_PATH="/xyz/openbmc_project/control/host$1/acpi_power_state"
    local DBUS_PROPERTIES_INTF_NAME="org.freedesktop.DBus.Properties"
    local INTF_NAME="xyz.openbmc_project.Control.Power.ACPIPowerState"
    local PROPERTY_NAME="SysACPIStatus"
    local PROPERTY_VAL="xyz.openbmc_project.Control.Power.ACPIPowerState.ACPI.$2"
    busctl call "$BUS_NAME" "$OBJ_PATH" "$DBUS_PROPERTIES_INTF_NAME" Set ssv "$INTF_NAME" "$PROPERTY_NAME" s "$PROPERTY_VAL"
}

update_host_state()
{
    local BUS_NAME="xyz.openbmc_project.State.Host$1"
    local OBJ_PATH="/xyz/openbmc_project/state/host$1"
    local DBUS_PROPERTIES_INTF_NAME="org.freedesktop.DBus.Properties"
    local INTF_NAME="xyz.openbmc_project.State.Host"
    local PROPERTY_NAME="CurrentHostState"
    local PROPERTY_VAL="xyz.openbmc_project.State.Host.HostState.$2"
    busctl call "$BUS_NAME" "$OBJ_PATH" "$DBUS_PROPERTIES_INTF_NAME" Set ssv "$INTF_NAME" "$PROPERTY_NAME" s "$PROPERTY_VAL"
}

update_chassis_power_state()
{
    local BUS_NAME="xyz.openbmc_project.State.Chassis$1"
    local OBJ_PATH="/xyz/openbmc_project/state/chassis$1"
    local DBUS_PROPERTIES_INTF_NAME="org.freedesktop.DBus.Properties"
    local INTF_NAME="xyz.openbmc_project.State.Chassis"
    local PROPERTY_NAME="CurrentPowerState"
    local PROPERTY_VAL="xyz.openbmc_project.State.Chassis.PowerState.$2"
    busctl call "$BUS_NAME" "$OBJ_PATH" "$DBUS_PROPERTIES_INTF_NAME" Set ssv "$INTF_NAME" "$PROPERTY_NAME" s "$PROPERTY_VAL"
}

update_sled_led_state()
{
    local HOST_ID=$1
    local HOST_STATE=$2
    case "$HOST_STATE" in
        ON|SLEEP)
            systemctl start obmc-led-group-start@sled"$HOST_ID"_good.service
            ;;
        AC_OFF|OFF)
            systemctl start obmc-led-group-stop@sled"$HOST_ID"_good.service
            ;;
        *)
            ;;
    esac
}

check_host_state()
{
    if ! PORT_ST_VAL=$("$MDIO_TOOL" "$SWITCH_MDIO_BUS" phy "${PORT_NUM_MAP[$1]}" 0x00); then
        # failed to get port status via mdio
        echo "UNKNOW"
        return 1
    fi

    if [ $((PORT_ST_VAL&16#0800)) -eq $((16#0000)) ]; then
        echo "OFF"
    elif [ $((PORT_ST_VAL&16#0A00)) -eq $((16#0A00)) ]; then
        echo "ON"
    elif [ $((PORT_ST_VAL&16#0900)) -eq $((16#0900)) ]; then
        echo "SLEEP"
    else
        echo "UNKNOW"
    fi
    return 0
}

while true
do
    for i in {1..6}
    do
        HOST_STATE=""
        if ! is_sled_present "$i"; then
            HOST_STATE="NOT_PRESENT"
        elif ! is_host_ac_on "$i"; then
            HOST_STATE="AC_OFF"
        else
            HOST_STATE=$(check_host_state "$i")
        fi

        if [ "$HOST_STATE" = "${HOST_PREVIOUS_STATE[$i]}" ]; then
            if [ "${HOST_STATE_CHANGE_CHECK[$i]}" -lt "$HOST_STATE_CHANGE_CHECH_CNT" ]; then
                echo "SLED$i: detected state recover (previous:${HOST_PREVIOUS_STATE[$i]}, current:$HOST_STATE)"
            fi
            HOST_STATE_CHANGE_CHECK[i]="$HOST_STATE_CHANGE_CHECH_CNT"
            HOST_NEW_STATE_TEMP[i]="$HOST_STATE"
        else
            if [ "$HOST_STATE" != "${HOST_NEW_STATE_TEMP[$i]}" ]; then
                HOST_STATE_CHANGE_CHECK[i]="$HOST_STATE_CHANGE_CHECH_CNT"
            fi

            if [ "${HOST_STATE_CHANGE_CHECK[$i]}" -gt "0" ]; then
                echo "SLED$i: detected state changed (previous:${HOST_PREVIOUS_STATE[$i]}, current:$HOST_STATE), check count: ${HOST_STATE_CHANGE_CHECK[$i]}"
                HOST_STATE_CHANGE_CHECK[i]=$((HOST_STATE_CHANGE_CHECK[i]-1))
            else
                echo "SLED$i: detected state changed, update host state to $HOST_STATE"
                update_host_acpi_power_state "$i" "${HOST_ACPI_ST_MAP[$HOST_STATE]}"
                update_host_state "$i" "${HOST_STATE_MAP[$HOST_STATE]}"
                update_chassis_power_state "$i" "${CHASSIS_PWR_STATE_MAP[$HOST_STATE]}"
                update_sled_led_state "$i" "$HOST_STATE"
                HOST_STATE_CHANGE_CHECK[i]="$HOST_STATE_CHANGE_CHECH_CNT"
                HOST_PREVIOUS_STATE[i]="$HOST_STATE"
            fi
            HOST_NEW_STATE_TEMP[i]="$HOST_STATE"
        fi
    done
    sleep 1
done