meta/recipes-devtools/python/python3_3.4.3.bb

require recipes-devtools/python/python.inc

DEPENDS = "python3-native libffi bzip2 db gdbm openssl readline sqlite3 zlib virtual/libintl xz"
PR = "${INC_PR}.0"
PYTHON_MAJMIN = "3.4"
PYTHON_BINABI= "${PYTHON_MAJMIN}m"
DISTRO_SRC_URI ?= "file://sitecustomize.py"
DISTRO_SRC_URI_linuxstdbase = ""
SRC_URI = "http://www.python.org/ftp/python/${PV}/Python-${PV}.tar.xz \
file://python-config.patch \
file://000-cross-compile.patch \
file://020-dont-compile-python-files.patch \
file://030-fixup-include-dirs.patch \
file://070-dont-clean-ipkg-install.patch \
file://080-distutils-dont_adjust_files.patch \
file://110-enable-zlib.patch \
file://130-readline-setup.patch \
file://150-fix-setupterm.patch \
file://0001-h2py-Fix-issue-13032-where-it-fails-with-UnicodeDeco.patch \
file://makerace.patch \
${DISTRO_SRC_URI} \
"

SRC_URI += "\
            file://03-fix-tkinter-detection.patch \
            file://04-default-is-optimized.patch \
            file://avoid_warning_about_tkinter.patch \
            file://cgi_py.patch \
            file://host_include_contamination.patch \
            file://python-3.3-multilib.patch \
            file://shutil-follow-symlink-fix.patch \
            file://sysroot-include-headers.patch \
            file://unixccompiler.patch \
            file://avoid-ncursesw-include-path.patch \
            file://python3-use-CROSSPYTHONPATH-for-PYTHON_FOR_BUILD.patch \
            file://python3-setup.py-no-host-headers-libs.patch \
            file://sysconfig.py-add-_PYTHON_PROJECT_SRC.patch \
            file://setup.py-check-cross_compiling-when-get-FLAGS.patch \
            file://setup.py-find-libraries-in-staging-dirs.patch \
           "
SRC_URI[md5sum] = "7d092d1bba6e17f0d9bd21b49e441dd5"
SRC_URI[sha256sum] = "b5b3963533768d5fc325a4d7a6bd6f666726002d696f1d399ec06b043ea996b8"

LIC_FILES_CHKSUM = "file://LICENSE;md5=dd98d01d471fac8d8dbdd975229dba03"

S = "${WORKDIR}/Python-${PV}"

inherit autotools multilib_header python3native pkgconfig

CONFIGUREOPTS += " --with-system-ffi "

CACHED_CONFIGUREVARS = "ac_cv_have_chflags=no \
                ac_cv_have_lchflags=no \
                ac_cv_have_long_long_format=yes \
                ac_cv_buggy_getaddrinfo=no \
                ac_cv_file__dev_ptmx=yes \
                ac_cv_file__dev_ptc=no \
"
# The 3 lines below are copied from the libffi recipe, ctypes ships its own copy of the libffi sources
#Somehow gcc doesn't set __SOFTFP__ when passing -mfloatabi=softp :(
TARGET_CC_ARCH_append_armv6 = " -D__SOFTFP__"
TARGET_CC_ARCH_append_armv7a = " -D__SOFTFP__"
TARGET_CC_ARCH += "-DNDEBUG -fno-inline"
EXTRA_OEMAKE += "CROSS_COMPILE=yes"
EXTRA_OECONF += "CROSSPYTHONPATH=${STAGING_LIBDIR_NATIVE}/python${PYTHON_MAJMIN}/lib-dynload/ --without-ensurepip"

export CROSS_COMPILE = "${TARGET_PREFIX}"
export _PYTHON_PROJECT_BASE = "${B}"
export _PYTHON_PROJECT_SRC = "${S}"
export CCSHARED = "-fPIC"

# Fix ctypes cross compilation
export CROSSPYTHONPATH = "${B}/build/lib.linux-${TARGET_ARCH}-${PYTHON_MAJMIN}:${S}/Lib:${S}/Lib/plat-linux"

# No ctypes option for python 3
PYTHONLSBOPTS = ""

do_configure_append() {
	rm -f ${S}/Makefile.orig
	autoreconf -Wcross --verbose --install --force --exclude=autopoint ../Python-${PV}/Modules/_ctypes/libffi
}

do_compile() {
        # regenerate platform specific files, because they depend on system headers
        cd ${S}/Lib/plat-linux*
        include=${STAGING_INCDIR} ${STAGING_BINDIR_NATIVE}/python3-native/python3 \
                ${S}/Tools/scripts/h2py.py -i '(u_long)' \
                ${STAGING_INCDIR}/dlfcn.h \
                ${STAGING_INCDIR}/linux/cdrom.h \
                ${STAGING_INCDIR}/netinet/in.h \
                ${STAGING_INCDIR}/sys/types.h
        sed -e 's,${STAGING_DIR_HOST},,g' -i *.py
        cd -


	# remove any bogus LD_LIBRARY_PATH
	sed -i -e s,RUNSHARED=.*,RUNSHARED=, Makefile

	if [ ! -f Makefile.orig ]; then
		install -m 0644 Makefile Makefile.orig
	fi
	sed -i -e 's,^CONFIGURE_LDFLAGS=.*,CONFIGURE_LDFLAGS=-L. -L${STAGING_LIBDIR},g' \
		-e 's,libdir=${libdir},libdir=${STAGING_LIBDIR},g' \
		-e 's,libexecdir=${libexecdir},libexecdir=${STAGING_DIR_HOST}${libexecdir},g' \
		-e 's,^LIBDIR=.*,LIBDIR=${STAGING_LIBDIR},g' \
		-e 's,includedir=${includedir},includedir=${STAGING_INCDIR},g' \
		-e 's,^INCLUDEDIR=.*,INCLUDE=${STAGING_INCDIR},g' \
		-e 's,^CONFINCLUDEDIR=.*,CONFINCLUDE=${STAGING_INCDIR},g' \
		Makefile
	# save copy of it now, because if we do it in do_install and 
	# then call do_install twice we get Makefile.orig == Makefile.sysroot
	install -m 0644 Makefile Makefile.sysroot

	oe_runmake HOSTPGEN=${STAGING_BINDIR_NATIVE}/python3-native/pgen \
		HOSTPYTHON=${STAGING_BINDIR_NATIVE}/python3-native/python3 \
		STAGING_LIBDIR=${STAGING_LIBDIR} \
		STAGING_BASELIBDIR=${STAGING_BASELIBDIR} \
		STAGING_INCDIR=${STAGING_INCDIR} \
		BUILD_SYS=${BUILD_SYS} HOST_SYS=${HOST_SYS} \
		LIB=${baselib} \
		ARCH=${TARGET_ARCH} \
		OPT="${CFLAGS}" libpython3.so

	oe_runmake HOSTPGEN=${STAGING_BINDIR_NATIVE}/python3-native/pgen \
		HOSTPYTHON=${STAGING_BINDIR_NATIVE}/python3-native/python3 \
		STAGING_LIBDIR=${STAGING_LIBDIR} \
		STAGING_INCDIR=${STAGING_INCDIR} \
		STAGING_BASELIBDIR=${STAGING_BASELIBDIR} \
		BUILD_SYS=${BUILD_SYS} HOST_SYS=${HOST_SYS} \
		LIB=${baselib} \
		ARCH=${TARGET_ARCH} \
		OPT="${CFLAGS}"
}

do_install() {
	# make install needs the original Makefile, or otherwise the inclues would
	# go to ${D}${STAGING...}/...
	install -m 0644 Makefile.orig Makefile

	install -d ${D}${libdir}/pkgconfig
	install -d ${D}${libdir}/python${PYTHON_MAJMIN}/config

	# rerun the build once again with original makefile this time
	# run install in a separate step to avoid compile/install race
	oe_runmake HOSTPGEN=${STAGING_BINDIR_NATIVE}/python3-native/pgen \
		HOSTPYTHON=${STAGING_BINDIR_NATIVE}/python3-native/python3 \
		STAGING_LIBDIR=${STAGING_LIBDIR} \
		STAGING_INCDIR=${STAGING_INCDIR} \
		STAGING_BASELIBDIR=${STAGING_BASELIBDIR} \
		BUILD_SYS=${BUILD_SYS} HOST_SYS=${HOST_SYS} \
		LIB=${baselib} \
		ARCH=${TARGET_ARCH} \
		DESTDIR=${D} LIBDIR=${libdir}
	
	oe_runmake HOSTPGEN=${STAGING_BINDIR_NATIVE}/python3-native/pgen \
		HOSTPYTHON=${STAGING_BINDIR_NATIVE}/python3-native/python3 \
		STAGING_LIBDIR=${STAGING_LIBDIR} \
		STAGING_INCDIR=${STAGING_INCDIR} \
		STAGING_BASELIBDIR=${STAGING_BASELIBDIR} \
		BUILD_SYS=${BUILD_SYS} HOST_SYS=${HOST_SYS} \
		LIB=${baselib} \
		ARCH=${TARGET_ARCH} \
		DESTDIR=${D} LIBDIR=${libdir} install

	# avoid conflict with 2to3 from Python 2
	rm -f ${D}/${bindir}/2to3

	install -m 0644 Makefile.sysroot ${D}/${libdir}/python${PYTHON_MAJMIN}/config/Makefile

	if [ -e ${WORKDIR}/sitecustomize.py ]; then
		install -m 0644 ${WORKDIR}/sitecustomize.py ${D}/${libdir}/python${PYTHON_MAJMIN}
	fi

	oe_multilib_header python${PYTHON_BINABI}/pyconfig.h
}

do_install_append_class-nativesdk () {
	create_wrapper ${D}${bindir}/python${PYTHON_MAJMIN} TERMINFO_DIRS='${sysconfdir}/terminfo:/etc/terminfo:/usr/share/terminfo:/usr/share/misc/terminfo:/lib/terminfo'
}

SSTATE_SCAN_FILES += "Makefile"
PACKAGE_PREPROCESS_FUNCS += "py_package_preprocess"

py_package_preprocess () {
	# copy back the old Makefile to fix target package
	install -m 0644 ${B}/Makefile.orig ${PKGD}/${libdir}/python${PYTHON_MAJMIN}/config/Makefile
	# Remove references to buildmachine paths in target Makefile and _sysconfigdata
	sed -i -e 's:--sysroot=${STAGING_DIR_TARGET}::g' -e s:'--with-libtool-sysroot=${STAGING_DIR_TARGET}'::g \
		${PKGD}/${libdir}/python${PYTHON_MAJMIN}/config/Makefile \
		${PKGD}/${libdir}/python${PYTHON_MAJMIN}/_sysconfigdata.py
}

require python-${PYTHON_MAJMIN}-manifest.inc

# manual dependency additions
RPROVIDES_${PN}-core = "${PN}"
RRECOMMENDS_${PN}-core = "${PN}-readline"
RRECOMMENDS_${PN}-crypt = "openssl"
RRECOMMENDS_${PN}-crypt_class-nativesdk = "nativesdk-openssl"

FILES_${PN}-2to3 += "${bindir}/2to3-${PYTHON_MAJMIN}"
FILES_${PN}-pydoc += "${bindir}/pydoc${PYTHON_MAJMIN} ${bindir}/pydoc3"
FILES_${PN}-idle += "${bindir}/idle3 ${bindir}/idle${PYTHON_MAJMIN}"

PACKAGES =+ "${PN}-pyvenv"
FILES_${PN}-pyvenv += "${bindir}/pyvenv-${PYTHON_MAJMIN} ${bindir}/pyvenv"

# package libpython3
PACKAGES =+ "libpython3 libpython3-staticdev"
FILES_libpython3 = "${libdir}/libpython*.so.*"
FILES_libpython3-staticdev += "${libdir}/python${PYTHON_MAJMIN}/config-${PYTHON_BINABI}/libpython${PYTHON_BINABI}.a"

# catch debug extensions (isn't that already in python-core-dbg?)
FILES_${PN}-dbg += "${libdir}/python${PYTHON_MAJMIN}/lib-dynload/.debug"

# catch all the rest (unsorted)
PACKAGES += "${PN}-misc"
RDEPENDS_${PN}-misc += "${PN}-core"
FILES_${PN}-misc = "${libdir}/python${PYTHON_MAJMIN}"

# catch manpage
PACKAGES += "${PN}-man"
FILES_${PN}-man = "${datadir}/man"

BBCLASSEXTEND = "nativesdk"