| Matt Spinler | bde651b | 2017-05-16 10:49:57 -0500 | [diff] [blame] | 1 | manager_configuration: |
| 2 | power_on_delay: 20 |
| 3 | |
| 4 | zone_configuration: |
| 5 | |
| Matt Spinler | 121d14a | 2017-03-28 13:06:37 -0500 | [diff] [blame] | 6 | #Air cooled zones |
| 7 | - zone_conditions: |
| 8 | - name: air_cooled_chassis |
| 9 | |
| 10 | zones: |
| 11 | - zone: 0 |
| 12 | cooling_profiles: |
| 13 | - air |
| 14 | - all |
| 15 | full_speed: 10500 |
| Matthew Barth | 88ffdbb | 2017-06-27 10:53:24 -0500 | [diff] [blame] | 16 | default_floor: 8000 |
| Matthew Barth | 45312ca | 2017-06-30 10:22:28 -0500 | [diff] [blame] | 17 | increase_delay: 5 |
| 18 | decrease_interval: 30 |
| Matthew Barth | b43cf56 | 2019-02-14 15:31:05 -0600 | [diff] [blame] | 19 | interfaces: |
| 20 | - name: xyz.openbmc_project.Control.ThermalMode |
| 21 | properties: |
| 22 | - name: Supported |
| 23 | type: array[string] |
| 24 | values: |
| 25 | - value: DEFAULT |
| 26 | description: > |
| 27 | Default thermal control mode |
| 28 | - value: CUSTOM |
| 29 | description: > |
| 30 | Custom thermal control mode for handling the use of |
| Matthew Barth | 8efc5ed | 2019-10-09 09:45:17 -0500 | [diff] [blame] | 31 | PCI cards located behind the GPU exhaust that |
| 32 | could overtemp where the default mode is not |
| 33 | sufficient enough. |
| 34 | - value: HEAVY_IO |
| 35 | description: > |
| 36 | Heavy IO thermal control mode for handling the use |
| 37 | of PCI cards that produce heavy IO utilization and |
| 38 | could overtemp. |
| 39 | - value: MAX_BASE_FAN_FLOOR |
| 40 | description: > |
| 41 | Maximum base fan floor mode is for handling the |
| 42 | use of any hardware that requires the highest |
| 43 | amount of cooling even when the system may be idle. |
| Matthew Barth | b43cf56 | 2019-02-14 15:31:05 -0600 | [diff] [blame] | 44 | - name: Current |
| 45 | type: string |
| 46 | persist: true |
| 47 | values: |
| 48 | - value: DEFAULT |
| 49 | description: > |
| 50 | Set current thermal control mode to the |
| 51 | default which will be replaced on startup if |
| 52 | another selected mode was persisted. |
| Matt Spinler | 121d14a | 2017-03-28 13:06:37 -0500 | [diff] [blame] | 53 | |
| 54 | #Water cooled zones |
| 55 | - zone_conditions: |
| 56 | - name: water_and_air_cooled_chassis |
| 57 | |
| 58 | zones: |
| 59 | - zone: 0 |
| 60 | cooling_profiles: |
| 61 | - water |
| 62 | - all |
| 63 | full_speed: 10500 |
| Matthew Barth | 88ffdbb | 2017-06-27 10:53:24 -0500 | [diff] [blame] | 64 | default_floor: 8000 |
| Matthew Barth | 45312ca | 2017-06-30 10:22:28 -0500 | [diff] [blame] | 65 | increase_delay: 5 |
| 66 | decrease_interval: 30 |
| Matthew Barth | b43cf56 | 2019-02-14 15:31:05 -0600 | [diff] [blame] | 67 | interfaces: |
| 68 | - name: xyz.openbmc_project.Control.ThermalMode |
| 69 | properties: |
| 70 | - name: Supported |
| 71 | type: array[string] |
| 72 | values: |
| 73 | - value: DEFAULT |
| 74 | description: > |
| 75 | Default thermal control mode |
| Matthew Barth | 8efc5ed | 2019-10-09 09:45:17 -0500 | [diff] [blame] | 76 | - value: CUSTOM |
| 77 | description: > |
| 78 | Custom thermal control mode for handling the use of |
| 79 | PCI cards located behind the GPU exhaust that |
| 80 | could overtemp where the default mode is not |
| 81 | sufficient enough. |
| 82 | - value: HEAVY_IO |
| 83 | description: > |
| 84 | Heavy IO thermal control mode for handling the use |
| 85 | of PCI cards that produce heavy IO utilization and |
| 86 | could overtemp. |
| 87 | - value: MAX_BASE_FAN_FLOOR |
| 88 | description: > |
| 89 | Maximum base fan floor mode is for handling the |
| 90 | use of any hardware that requires the highest |
| 91 | amount of cooling even when the system may be idle. |
| Matthew Barth | b43cf56 | 2019-02-14 15:31:05 -0600 | [diff] [blame] | 92 | - name: Current |
| 93 | type: string |
| 94 | persist: true |
| 95 | values: |
| Matthew Barth | 8efc5ed | 2019-10-09 09:45:17 -0500 | [diff] [blame] | 96 | - value: DEFAULT |
| 97 | description: > |
| 98 | Set current thermal control mode to the |
| 99 | default which will be replaced on startup if |
| 100 | another selected mode was persisted. |