dump/tools/common/include/gendumpheader

#!/bin/bash
#
#Header for BMC DUMP
#This script will create header file only for IBM systems.
#This script will generate generic IBM dump header format.
#
#Note: The dump header will be imposed on the dump file i.e
#<dump name>.tar.xz/gz only on IBM specific systems, user needs to
#separate out the header before extracting the dump.
#

#Constants
declare -rx DUMP_HEADER_ENTRY_SIZE='516'
declare -rx SIZE_4='4'
declare -rx SIZE_8='8'
declare -rx SIZE_12='12'
declare -rx SIZE_32='32'
#Dump Summary size without header
declare -rx DUMP_SUMMARY_SIZE='1024'
declare -rx HW_DUMP='00'
declare -rx HB_DUMP='20'
declare -rx SBE_DUMP='30'
declare -rx OP_DUMP="opdump"
declare -rx INVENTORY_MANAGER='xyz.openbmc_project.Inventory.Manager'
declare -rx INVENTORY_PATH='/xyz/openbmc_project/inventory/system'
declare -rx INVENTORY_ASSET_INT='xyz.openbmc_project.Inventory.Decorator.Asset'
declare -rx INVENTORY_BMC_BOARD='/xyz/openbmc_project/inventory/system/chassis/motherboard'
declare -rx PHOSPHOR_LOGGING='xyz.openbmc_project.Logging'
declare -rx PEL_ENTRY='org.open_power.Logging.PEL.Entry'
declare -rx PEL_ID_PROP='PlatformLogID'

#Variables
declare -x modelNo
modelNo=$(busctl get-property $INVENTORY_MANAGER $INVENTORY_PATH \
    $INVENTORY_ASSET_INT Model | cut -d " " -f 2 | sed "s/^\(\"\)\(.*\)\1\$/\2/g")
#Variables
declare -x serialNo
serialNo=$(busctl get-property $INVENTORY_MANAGER $INVENTORY_PATH \
    $INVENTORY_ASSET_INT SerialNumber | cut -d " " -f 2 | sed "s/^\(\"\)\(.*\)\1\$/\2/g")
declare -x dDay
dDay=$(date -d @"$EPOCHTIME" +'%Y%m%d%H%M%S')
declare -x bmcSerialNo
bmcSerialNo=$(busctl call $INVENTORY_MANAGER $INVENTORY_BMC_BOARD \
        org.freedesktop.DBus.Properties Get ss $INVENTORY_ASSET_INT \
    SerialNumber | cut -d " " -f 3 | sed "s/^\(\"\)\(.*\)\1\$/\2/g")

#Function to add NULL
function add_null() {
    local a=$1
    printf '%*s' $a | tr ' ' "\0" >> $FILE
}

#Function to is to convert the EPOCHTIME collected
#from dreport into hex values and write the same in
#header.
function dump_time() {
    x=${#dDay}
    msize=`expr $x / 2`
    msize=`expr $SIZE_8 - $msize`
    for ((i=0;i<$x;i+=2));
    do
        printf \\x${dDay:$i:2} >> $FILE
    done
    add_null $msize
}

#Function to fetch the size of the dump
function dump_size() {
    #Adding 516 bytes as the total dump size is dump tar size
    #plus the dump header entry in this case
    #dump_header and dump_entry
    # shellcheck disable=SC2154 # name_dir comes from elsewhere.
    dumpSize=$(stat -c %s "$name_dir.bin")
    sizeDump=$(( dumpSize + DUMP_HEADER_ENTRY_SIZE ))
    printf -v hex "%x" "$sizeDump"
    x=${#hex}
    if [ $(($x % 2)) -eq 1 ]; then
        hex=0$hex
        x=${#hex}
    fi
    msize=`expr $x / 2`
    msize=`expr $SIZE_8 - $msize`
    add_null $msize
    for ((i=0;i<$x;i+=2));
    do
        printf \\x${hex:$i:2} >> $FILE
    done
}

#Function to set dump id to 8 bytes format
function get_dump_id() {
    # shellcheck disable=SC2154
    size=${#dump_id}
    if [ "$1" == "$OP_DUMP" ]; then
        nulltoadd=$(( SIZE_4 - size / 2 - size % 2 ))
        add_null "$nulltoadd"
        for ((i=0;i<size;i+=2));
        do
            # shellcheck disable=SC2059
            printf "\\x${dump_id:$i:2}" >> "$FILE"
        done
    else
        nulltoadd=$(( SIZE_8 - size ))
        printf '%*s' "$nulltoadd" | tr ' ' "0" >> "$FILE"
        printf "%s" "$dump_id" >> "$FILE"
    fi
}

#Function to get the bmc serial number
function getbmc_serial() {
    x=${#bmcSerialNo}
    nulltoadd=`expr $SIZE_12 - $x`
    printf $bmcSerialNo >> $FILE
    printf '%*s' $nulltoadd | tr ' ' "0" >> $FILE
}

#Function to fetch the hostname
function system_name() {
    name=$(hostname)
    len=${#name}
    nulltoadd=$(( SIZE_32 - len ))
    printf "%s" "$name" >> "$FILE"
    add_null "$nulltoadd"
}

#Function to get the errorlog ID
function get_eid() {
    # shellcheck disable=SC2154 # dump_type comes from elsewhere
    if [ "$dump_type" = "$OP_DUMP" ]; then
        # shellcheck disable=SC2154 # elog_id comes from elsewhere
        x=${#elog_id}
        if [ "$x" = 8 ]; then
            msize=$(( x / 2 ))
            msize=$(( SIZE_4 - msize ))
            for ((i=0;i<x;i+=2));
            do
                printf "\\x${elog_id:$i:2}" >> "$FILE"
            done
            add_null "$msize"
        else
            add_null 4
        fi
    else
        if ! { [[ $dump_type = "$TYPE_ELOG" ]] || \
                [[ $dump_type = "$TYPE_CHECKSTOP" ]]; }; then
            x=${#elog_id}
            if [ "$x" = 8 ]; then
                for ((i=0;i<x;i+=2));
                do
                    printf "\\x${elog_id:$i:2}" >> "$FILE"
                done
            else
                add_null 4
            fi
        else
            strpelid=$(busctl get-property $PHOSPHOR_LOGGING \
                $optional_path $PEL_ENTRY $PEL_ID_PROP | cut -d " " -f 2)
            decpelid=$(expr "$strpelid" + 0)
            hexpelid=$(printf "%x" "$decpelid")
            x=${#hexpelid}
            if [ "$x" = 8 ]; then
                for ((i=0;i<x;i+=2));
                do
                    printf "\\x${hexpelid:$i:2}" >> "$FILE"
                done
            else
                add_null 4
            fi
        fi
    fi
}

#Function to get the tar size of the dump
function tar_size() {
    printf -v hex "%x" "$size_dump"
    x=${#hex}
    if [ $((x % 2)) -eq 1 ]; then
        hex=0$hex
        x=${#hex}
    fi
    msize=$(( x / 2 ))
    msize=$(( SIZE_4 - msize ))
    add_null "$msize"
    for ((i=0;i<x;i+=2));
    do
        # shellcheck disable=SC2059 # using 'hex' as a variable is safe here.
        printf "\\x${hex:$i:2}" >> "$FILE"
    done
}

#Function will get the total size of the dump without header
# i.e. Dump summary size i.e. 1024 bytes + the tar file size
function total_size() {
    size_dump=$(( size_dump + DUMP_SUMMARY_SIZE ))
    printf -v hex "%x" "$size_dump"
    x=${#hex}
    if [ $((x % 2)) -eq 1 ]; then
        hex=0$hex
        x=${#hex}
    fi
    msize=$(( x / 2 ))
    msize=$(( SIZE_8 - msize ))
    add_null "$msize"
    for ((i=0;i<x;i+=2));
    do
        # shellcheck disable=SC2059 # using 'hex' as a variable is safe here.
        printf "\\x${hex:$i:2}" >> "$FILE"
    done
}

#Function to populate content type based on dump type
function content_type() {
    type="00000000"
    # content type:
    # Hostboot dump = "20"
    # Hardware dump = "00"
    # SBE dump = "30"
    if [ "$dump_content_type" = "$HB_DUMP" ]; then
        type="00000200"
    elif [ "$dump_content_type" = "$HW_DUMP" ]; then
        type="40000000"
    elif [ "$dump_content_type" = "$SBE_DUMP" ]; then
        type="02000000"
    fi
    x=${#type}
    for ((i=0;i<$x;i+=2));
    do
        # shellcheck disable=SC2059 # using 'type' as a variable is safe here.
        printf "\\x${type:$i:2}" >> "$FILE"
    done
}

# @brief Fetching model number and serial number property from inventory
#  If the busctl command fails, populating the model and serial number
#  with default value i.e. 0
function get_bmc_model_serial_number() {
    modelNo=$(busctl get-property $INVENTORY_MANAGER $INVENTORY_PATH \
        $INVENTORY_ASSET_INT Model | cut -d " " -f 2 | sed "s/^\(\"\)\(.*\)\1\$/\2/g")

    if [ -z "$modelNo" ]; then
        modelNo="00000000"
    fi

    bmcSerialNo=$(busctl call $INVENTORY_MANAGER $INVENTORY_BMC_BOARD \
            org.freedesktop.DBus.Properties Get ss $INVENTORY_ASSET_INT \
        SerialNumber | cut -d " " -f 3 | sed "s/^\(\"\)\(.*\)\1\$/\2/g")

    if [ -z "$bmcSerialNo" ]; then
        bmcSerialNo="000000000000"
    fi
}

#Function to add virtual file directory entry, consists of below entries
####################FORMAT################
#Name              Size(bytes)  Value
#Entry Header      8            FILE
#Entry Size        2            0x0040
#Reserved          10           NULL
#Entry Type        2            0x0001
#File Name Prefix  2            0x000F
#Dump File Type    7            BMCDUMP/SYSDUMP/NAGDUMP
#Separator         1            .
#System Serial No  7            System serial number fetched from system
#Dump Identifier   8            Dump Identifier value fetched from dump
#Separator         1            .
#Time stamp        14           Form should be yyyymmddhhmmss
#Null Terminator   1            0x00
function dump_file_entry() {
    printf "FILE    " >> $FILE
    add_null 1
    printf '\x40' >> $FILE #Virtual file directory entry size
    add_null 11
    printf '\x01' >> $FILE
    add_null 1
    printf '\x0F' >> "$FILE"
    if [ "$dump_type" = "$OP_DUMP" ]; then
        printf "SYSDUMP.%s." "$serialNo" >> "$FILE"
    else
        printf "%s.%s." "$header_dump_name" "$serialNo" >> "$FILE"
    fi
    get_dump_id
    printf "." >> $FILE
    printf $dDay >> $FILE  #UTC time stamp
    add_null 1
}

#Function section directory entry, consists of below entries
####################FORMAT################
#Name              Size(bytes)  Value
#Entry Header      8            SECTION
#Entry Size        2            0x0030
#Section Priority  2            0x0000
#Reserved          4            NULL
#Entry Flags       4            0x00000001
#Entry Types       2            0x0002
#Reserved          2            NULL
#Dump Size         8            Dump size in hex + dump header
#Optional Section  16           BMCDUMP/NAGDUMP/DUMP SUMMARY
function dump_section_entry() {
    printf "SECTION " >> $FILE
    add_null 1
    printf '\x30' >> "$FILE" #Section entry size
    add_null 9
    if [ "$dump_type" = "$OP_DUMP" ]; then
        add_null 1
    else
        printf '\x01' >> "$FILE"
    fi
    add_null 1
    printf '\x02' >> "$FILE"
    add_null 2
    if [ "$dump_type" = "$OP_DUMP" ]; then
        add_null 6
        printf '\x04' >> "$FILE"
        add_null 1
        printf "DUMP SUMMARY" >> "$FILE"
        add_null 4
    else
        dump_size    #Dump size
        printf "%s" "$header_dump_name" >> "$FILE"
        add_null 9
    fi
}

#Function to add dump header, consists of below entries
####################FORMAT################
#Name              Size(bytes)  Value
#Dump type         8            BMC/NAG DUMP
#Dump Request time 8            Dump request time stamp (in BCD)
#Dump Identifier   4            Dump identifier fetched from dump
#Dump version      2            0x0210
#Dump header       2            0x200
#Total dump size   8            Dump size + dump header
#Panel function    32           System model, feature, type and IPL mode
#System Name       32           System Name (in ASCII)
#Serial number     7            System serial number
#Reserved          1            NULL
#PLID              4            Comes from errorlog
#File Header Size  2            0x70
#Dump SRC Size     2            Dump SRC Size. Currently NULL
#DUMP SRC          320          DUMP SRC. Currently NULL
#Dump Req Type     4            Dump requester user interface type.
#Dump Req ID       32           Dump requester user interface ID
#Dump Req user ID  32           Dump requester user ID.
#
#TODO: Github issue #2639, to populate the unpopulated elements.
#Note: Unpopulated elements are listed below are set as NULL
#PLID
#SRC size
#SRC dump
#Dump requester type
#Dump Req ID
#Dump Req user ID
function dump_header() {
    if [ $dump_type = "$TYPE_FAULTDATA" ]; then
        printf "FLT DUMP" >> $FILE
    else
        printf "BMC DUMP" >> $FILE
    fi
    dump_time
    add_null 4 #Dump Identifier
    printf '\x02' >> $FILE #Dump version 0x0210
    printf '\x10' >> $FILE
    printf '\x02' >> $FILE #Dump header size 0x0200
    add_null 1
    dump_size  #dump size
    printf "$modelNo" >> "$FILE"
    add_null 24
    printf "Server-%s-SN%s" "$modelNo" "$serialNo" >> "$FILE"
    add_null 7
    printf "$serialNo" >> "$FILE"
    add_null 1
    get_eid
    add_null 1
    printf '\x70' >> "$FILE" #File header size
    add_null 2 # SRC size
    add_null 320 # SRC dump
    getbmc_serial
    add_null 68 # Dump requester details
}

#Function to add Dump entry, consists of below entries
####################FORMAT################
#Name               Size(bytes)  Value
#Dump Entry Version 1            0x01
#BMC Dump Valid     1            0x01
#No of Dump Entry   2            Number of Dump Entry
#
function dump_entry() {
    printf '\x01' >> $FILE #Dump entry version
    printf '\x01' >> $FILE #Dump valid
    add_null 1
    printf '\x10' >> $FILE #Dump entry
}

#Function to Hardware Dump Section
####################FORMAT##################
#Name            Size(bytes)    Value
#HWDumpHeader      8            SECTION
#HWDumpEntrySize   2            0x0030
#HWDumpPriority    2            0x02
#reserve6          4            NULL
#HWDumpEntryFlag   4            0x0001
#HWDumpEntryType   2            0x02
#reserve7          2            NULL
#reserve7a         4            NULL
#HWDumpSize        4            NULL
#HWDumpName[16]    16           HARDWARE DATA
function hw_dump_section() {
    printf "SECTION " >> "$FILE"
    add_null 1
    printf '\x30' >> "$FILE" #Section entry size
    add_null 1
    printf '\x02' >> "$FILE"
    add_null 7
    printf '\x00' >> "$FILE"
    add_null 1
    printf '\x02' >> "$FILE"
    add_null 6
    tar_size
    printf "HARDWARE DATA" >> "$FILE"
    add_null 3
}

#Function to Mainstore Dump Section
######################FORMAT###################
#Name                Size(in bytes)   Value
#MainstoreHeader         8            SECTION
#MainstoreEntrySize      2            0x30
#MainstorePriority       2            0x02
#reserve8                4            NULL
#MainstoreEntryFlag      4            NULL
#MainstoreEntryType      2            0x01
#reserve9                2            NULL
#MainstoreSize           8            NULL
#MainstoreName           16           HYPERVISOR DATA
function mainstore_dump_section() {
    printf "SECTION " >> "$FILE"
    add_null 1
    printf '\x30' >> "$FILE" #Section entry size
    add_null 1
    printf '\x02' >> "$FILE"
    add_null 7
    printf '\x01' >> "$FILE"
    add_null 1
    printf '\x02' >> "$FILE"
    add_null 10
    printf "HYPERVISOR DATA" >> "$FILE"
    add_null 1
}

#Function for platform system dump header
######################FORMAT##################
#Name                Size(in bytes)   Value
#eyeCatcher              8            SYS DUMP
#requestTimestamp        8            BCD time
#dumpIdentifier          4
#dumpVersion             2
#headerSize              2
#totalDumpSize           8
#machineInfo             32
#systemName              32
#systemSerialNumber      7
#Dump Creator BMC        1
#eventLogId              4
#fileHeaderSize          2
####################DATA NOT AVAILABLE##########
#srcSize                 2
#dumpSrc                 332
#toolType                4
#clientId                32
#userId                  32
#systemDumpFlags         2
#hardwareErrorFlags      2
#processorChipEcid       2
#hardwareObjectModel     1
#chUnused                1
#cecMemoryErrorFlags     8
#memoryDumpStartTime     8
#memoryDumpCompleteTime  8
#hypVerRelMod            8
#Reserved4HysrInfo       2
#hypMode                 1
#hypDumpContentPolicy    1
#Reserved4HWDInfo        2
#hardwareNodalCount      2
#hardwareDumpTableSize   4
#hardwareDumpDataSize    4
#totalHardwareDumpDataSize   4
#mdrtTableSize           4
#mdrtTableAddress        8
#memoryDumpDataSize      8
#hypModLoadMapTime       8
#hardwareCollectionEndTime   8
#contentType             4
#failingUnitId           4
#failingCappChipId       2
#failingCappUnitId       1
#reserve02               5
#hypHRMOR                8
#hypNACAAddress          8
#hardwareCollectionStartTime  8
#mdstTableSize           4
#payloadState            4
#creator BMC             1
#reservedForCreator      169
function plat_dump_header() {
    printf "SYS DUMP" >> "$FILE"
    dump_time
    get_dump_id "$OP_DUMP"   #Dump identifier
    printf '\x02' >> "$FILE"
    printf '\x21' >> "$FILE" #Need to cross check
    printf '\x04' >> "$FILE" #Dump header size 0x0400
    add_null 1
    total_size
    printf "%s" "$modelNo" >> "$FILE"
    add_null 24
    system_name
    printf "%s" "$serialNo" >> "$FILE"
    printf '\x01' >> "$FILE"   #Dump Creator BMC
    get_eid
    add_null 1
    printf '\xd0' >> "$FILE" #File Header size
    add_null 498
    content_type # 4 bytes
    add_null 44
    printf '\x01' >> "$FILE"  # BMC indicator
    add_null 367
}


#main function
function gen_header_package() {
    dump_file_entry
    dump_section_entry
    if [ "$dump_type" = "$OP_DUMP" ]; then
        hw_dump_section
        mainstore_dump_section
        plat_dump_header
    else
        dump_header
        dump_entry
    fi
}

get_bmc_model_serial_number

#Run gen_header_package
gen_header_package