blob: 5afe6baa90b63930b6ae28b6b9f55e5c4a3884d4 [file] [log] [blame]
#include <unistd.h>
#include <analyzer/service_data.hpp>
#include <analyzer/util.hpp>
#include <hei_main.hpp>
#include <phosphor-logging/elog.hpp>
#include <sdbusplus/bus.hpp>
#include <util/bin_stream.hpp>
#include <util/dbus.hpp>
#include <util/ffdc_file.hpp>
#include <util/pdbg.hpp>
#include <util/trace.hpp>
#include <xyz/openbmc_project/Logging/Create/server.hpp>
#include <xyz/openbmc_project/Logging/Entry/server.hpp>
#include <fstream>
#include <memory>
namespace LogSvr = sdbusplus::xyz::openbmc_project::Logging::server;
namespace analyzer
{
//------------------------------------------------------------------------------
enum FfdcSubType_t : uint8_t
{
FFDC_SIGNATURES = 0x01,
FFDC_REGISTER_DUMP = 0x02,
FFDC_CALLOUT_FFDC = 0x03,
FFDC_HB_SCRATCH_REGS = 0x04,
// For the callout section, the value of '0xCA' is required per the
// phosphor-logging openpower-pel extention spec.
FFDC_CALLOUTS = 0xCA,
};
enum FfdcVersion_t : uint8_t
{
FFDC_VERSION1 = 0x01,
};
//------------------------------------------------------------------------------
void __getSrc(const libhei::Signature& i_signature, uint32_t& o_word6,
uint32_t& o_word7, uint32_t& o_word8)
{
// [ 0:15] chip model
// [16:23] reserved space in chip ID
// [24:31] chip EC level
o_word6 = i_signature.getChip().getType();
// [ 0:15] chip position
// [16:23] node position
// [24:31] signature attention type
auto chipPos = util::pdbg::getChipPos(i_signature.getChip());
uint8_t nodePos = 0; // TODO: multi-node support
auto attn = i_signature.getAttnType();
o_word7 = (chipPos & 0xffff) << 16 | (nodePos & 0xff) << 8 | (attn & 0xff);
// [ 0:15] signature ID
// [16:23] signature instance
// [24:31] signature bit position
o_word8 = i_signature.toUint32();
// Word 9 is currently unused
}
//------------------------------------------------------------------------------
void __setSrc(const libhei::Signature& i_rootCause,
std::map<std::string, std::string>& io_logData)
{
uint32_t word6 = 0, word7 = 0, word8 = 0;
__getSrc(i_rootCause, word6, word7, word8);
io_logData["SRC6"] = std::to_string(word6);
io_logData["SRC7"] = std::to_string(word7);
io_logData["SRC8"] = std::to_string(word8);
}
//------------------------------------------------------------------------------
void __addCalloutList(const ServiceData& i_servData,
std::vector<util::FFDCFile>& io_userDataFiles)
{
// Create a new entry for the user data section containing the callout list.
io_userDataFiles.emplace_back(util::FFDCFormat::JSON, FFDC_CALLOUTS,
FFDC_VERSION1);
// Use a file stream to write the JSON to file.
std::ofstream o{io_userDataFiles.back().getPath()};
o << i_servData.getCalloutList();
}
//------------------------------------------------------------------------------
void __addCalloutFFDC(const ServiceData& i_servData,
std::vector<util::FFDCFile>& io_userDataFiles)
{
// Create a new entry for the user data section containing the FFDC.
io_userDataFiles.emplace_back(util::FFDCFormat::Custom, FFDC_CALLOUT_FFDC,
FFDC_VERSION1);
// Use a file stream to write the JSON to file.
std::ofstream o{io_userDataFiles.back().getPath()};
o << i_servData.getCalloutFFDC();
}
//------------------------------------------------------------------------------
void __captureSignatureList(const libhei::IsolationData& i_isoData,
std::vector<util::FFDCFile>& io_userDataFiles)
{
// Create a new entry for this user data section regardless if there are any
// signatures in the list.
io_userDataFiles.emplace_back(util::FFDCFormat::Custom, FFDC_SIGNATURES,
FFDC_VERSION1);
// Create a streamer for easy writing to the FFDC file.
auto path = io_userDataFiles.back().getPath();
util::BinFileWriter stream{path};
// The first 4 bytes in the FFDC contains the number of signatures in the
// list. Then, the list of signatures will follow.
auto list = i_isoData.getSignatureList();
uint32_t numSigs = list.size();
stream << numSigs;
for (const auto& sig : list)
{
// Each signature will use the same format as the SRC (12 bytes each).
uint32_t word6 = 0, word7 = 0, word8 = 0;
__getSrc(sig, word6, word7, word8);
stream << word6 << word7 << word8;
}
// If the stream failed for any reason, remove the FFDC file.
if (!stream.good())
{
trace::err("Unable to write signature list FFDC file: %s",
path.string().c_str());
io_userDataFiles.pop_back();
}
}
//------------------------------------------------------------------------------
void __captureRegisterDump(const libhei::IsolationData& i_isoData,
std::vector<util::FFDCFile>& io_userDataFiles)
{
// Create a new entry for this user data section regardless if there are any
// registers in the dump.
io_userDataFiles.emplace_back(util::FFDCFormat::Custom, FFDC_REGISTER_DUMP,
FFDC_VERSION1);
// Create a streamer for easy writing to the FFDC file.
auto path = io_userDataFiles.back().getPath();
util::BinFileWriter stream{path};
// The first 4 bytes in the FFDC contains the number of chips with register
// data. Then the data for each chip will follow.
auto dump = i_isoData.getRegisterDump();
uint32_t numChips = dump.size();
stream << numChips;
for (const auto& entry : dump)
{
auto chip = entry.first;
auto regList = entry.second;
// Each chip will have the following information:
// 4 byte chip model/EC
// 2 byte chip position
// 1 byte node position
// 4 byte number of registers
// Then the data for each register will follow.
uint32_t chipType = chip.getType();
uint16_t chipPos = util::pdbg::getChipPos(chip);
uint8_t nodePos = 0; // TODO: multi-node support
uint32_t numRegs = regList.size();
stream << chipType << chipPos << nodePos << numRegs;
for (const auto& reg : regList)
{
// Each register will have the following information:
// 3 byte register ID
// 1 byte register instance
// 1 byte data size
// * byte data buffer (* depends on value of data size)
libhei::RegisterId_t regId = reg.regId; // 3 byte
libhei::Instance_t regInst = reg.regInst; // 1 byte
auto tmp = libhei::BitString::getMinBytes(reg.data->getBitLen());
if (255 < tmp)
{
trace::inf("Register data execeeded 255 and was truncated: "
"regId=0x%06x regInst=%u",
regId, regInst);
tmp = 255;
}
uint8_t dataSize = tmp;
stream << regId << regInst << dataSize;
stream.write(reg.data->getBufAddr(), dataSize);
}
}
// If the stream failed for any reason, remove the FFDC file.
if (!stream.good())
{
trace::err("Unable to write register dump FFDC file: %s",
path.string().c_str());
io_userDataFiles.pop_back();
}
}
//------------------------------------------------------------------------------
void __captureHostbootScratchRegisters(
std::vector<util::FFDCFile>& io_userDataFiles)
{
// Get the Hostboot scratch registers from the primary processor.
uint32_t cfamAddr = 0x283C;
uint32_t cfamValue = 0;
uint64_t scomAddr = 0x4602F489;
uint64_t scomValue = 0;
auto priProc = util::pdbg::getPrimaryProcessor();
if (nullptr == priProc)
{
trace::err("Unable to get primary processor");
}
else
{
if (0 != util::pdbg::getCfam(priProc, cfamAddr, cfamValue))
{
cfamValue = 0; // just in case
}
if (0 != util::pdbg::getScom(priProc, scomAddr, scomValue))
{
scomValue = 0; // just in case
}
}
// Create a new entry for this user data section.
io_userDataFiles.emplace_back(util::FFDCFormat::Custom,
FFDC_HB_SCRATCH_REGS, FFDC_VERSION1);
// Create a streamer for easy writing to the FFDC file.
auto path = io_userDataFiles.back().getPath();
util::BinFileWriter stream{path};
// Add the data (CFAM addr/val, then SCOM addr/val).
stream << cfamAddr << cfamValue << scomAddr << scomValue;
// If the stream failed for any reason, remove the FFDC file.
if (!stream.good())
{
trace::err("Unable to write register dump FFDC file: %s",
path.string().c_str());
io_userDataFiles.pop_back();
}
}
//------------------------------------------------------------------------------
std::string __getMessageRegistry(AnalysisType i_type)
{
if (AnalysisType::SYSTEM_CHECKSTOP == i_type)
{
return "org.open_power.HwDiags.Error.Checkstop";
}
else if (AnalysisType::TERMINATE_IMMEDIATE == i_type)
{
return "org.open_power.HwDiags.Error.Predictive";
}
return "org.open_power.HwDiags.Error.Informational"; // default
}
//------------------------------------------------------------------------------
std::string __getMessageSeverity(AnalysisType i_type)
{
// Default severity is informational (no service action required).
LogSvr::Entry::Level severity = LogSvr::Entry::Level::Informational;
if (AnalysisType::SYSTEM_CHECKSTOP == i_type)
{
// System checkstops are always unrecoverable errors (service action
// required).
severity = LogSvr::Entry::Level::Error;
}
else if (AnalysisType::TERMINATE_IMMEDIATE == i_type)
{
// TIs will be reported as a predicive error (service action required).
severity = LogSvr::Entry::Level::Warning;
}
// Convert the message severity to a string.
return LogSvr::Entry::convertLevelToString(severity);
}
//------------------------------------------------------------------------------
uint32_t createPel(const libhei::IsolationData& i_isoData,
const ServiceData& i_servData)
{
uint32_t o_plid = 0; // default, zero indicates PEL was not created
// The message registry will require additional log data to fill in keywords
// and additional log data.
std::map<std::string, std::string> logData;
// Keep track of the temporary files associated with the user data FFDC.
// WARNING: Once the objects stored in this vector go out of scope, the
// temporary files will be deleted. So they must remain in scope
// until the PEL is submitted.
std::vector<util::FFDCFile> userDataFiles;
// Set words 6-9 of the SRC.
__setSrc(i_servData.getRootCause(), logData);
// Add the list of callouts to the PEL.
__addCalloutList(i_servData, userDataFiles);
// Add the Hostboot scratch register to the PEL.
__captureHostbootScratchRegisters(userDataFiles);
// Add the callout FFDC to the PEL.
__addCalloutFFDC(i_servData, userDataFiles);
// Capture the complete signature list.
__captureSignatureList(i_isoData, userDataFiles);
// Capture the complete signature list.
__captureRegisterDump(i_isoData, userDataFiles);
// Now, that all of the user data files have been created, transform the
// data into the proper format for the PEL.
std::vector<util::FFDCTuple> userData;
util::transformFFDC(userDataFiles, userData);
try
{
// We want to use the logging interface that returns the event log
// id's of the newly created logs (org.open_power.Logging.PEL) so
// find the service that implements this interface.
constexpr auto interface = "org.open_power.Logging.PEL";
constexpr auto path = "/xyz/openbmc_project/logging";
std::string service;
if (0 == util::dbus::findService(interface, path, service))
{
// Use function that returns log id's
constexpr auto function = "CreatePELWithFFDCFiles";
// Get access to logging interface and method for creating log.
auto bus = sdbusplus::bus::new_default_system();
// Using direct create method (for additional data).
auto method =
bus.new_method_call(service.c_str(), path, interface, function);
// The "Create" method requires manually adding the process ID.
logData["_PID"] = std::to_string(getpid());
// Get the message registry entry for this failure.
auto message = __getMessageRegistry(i_servData.getAnalysisType());
// Get the message severity for this failure.
auto severity = __getMessageSeverity(i_servData.getAnalysisType());
// Add the message, with additional log and user data.
method.append(message, severity, logData, userData);
// Log the event.
auto reply = bus.call(method);
// Response will be a tuple containing bmc-log-id, pel-log-id
std::tuple<uint32_t, uint32_t> response = {0, 0};
// Parse reply for response
reply.read(response);
o_plid = std::get<1>(response);
}
}
catch (const sdbusplus::exception::SdBusError& e)
{
trace::err("Exception while creating event log entry");
std::string exceptionString = std::string(e.what());
trace::err(exceptionString.c_str());
}
// Return the platorm log ID of the error.
return o_plid;
}
} // namespace analyzer