attn/ti_handler.cpp - openbmc/openpower-hw-diags - Gitiles

 #include <fmt/format.h>

 #include <attn/attn_common.hpp>
 #include <attn/attn_dbus.hpp>
 #include <attn/attn_dump.hpp>
 #include <attn/attn_logging.hpp>
 #include <attn/pel/pel_common.hpp>
 #include <attn/ti_handler.hpp>
 #include <sdbusplus/bus.hpp>
 #include <sdbusplus/exception.hpp>
 #include <util/dbus.hpp>
 #include <util/trace.hpp>

 #include <iomanip>
 #include <iostream>

 namespace attn
 {

 /**
  * @brief Determine if this is a HB or PHYP TI event
  *
  * Use the TI info data area to determine if this is either a HB or a PHYP
  * TI event then handle the event.
  *
  * @param i_tiDataArea pointer to the TI info data
  */
 int tiHandler(TiDataArea* i_tiDataArea)
 {
     int rc = RC_SUCCESS;

     // capture some additional data for logs/traces
     addHbStatusRegs();

     // check TI data area if it is available
     if (nullptr != i_tiDataArea)
     {
         // HB v. PHYP TI logic: Only hosboot will fill in hbTerminateType
         // and it will be non-zero. Only hostboot will fill out source and
         // it it will be non-zero. Only PHYP will fill in srcFormat and it
         // will be non-zero.
         if ((0 == i_tiDataArea->hbTerminateType) &&
             (0 == i_tiDataArea->source) && (0 != i_tiDataArea->srcFormat))
         {
             handlePhypTi(i_tiDataArea);
         }
         else
         {
             handleHbTi(i_tiDataArea);
         }
     }
     else
     {
         // TI data was not available This should not happen since we provide
         // a default TI info in the case where get TI info was not successful.
         eventAttentionFail((int)AttnSection::tiHandler | ATTN_INFO_NULL);
         rc = RC_NOT_HANDLED;
     }

     return rc;
 }

 /**
  * @brief Handle a PHYP terminate immediate special attention
  *
  * The TI info data area will contain information pertaining to the TI
  * condition. We will wither quiesce the host or initiate a MPIPL depending
  * depending on the auto reboot configuration. We will also create a PEL which
  * will contain the TI info data and FFDC data captured in the system journal.
  *
  * @param i_tiDataArea pointer to TI information filled in by hostboot
  */
 void handlePhypTi(TiDataArea* i_tiDataArea)
 {
     trace::inf("PHYP TI");

     // gather additional data for PEL
     std::map<std::string, std::string> tiAdditionalData;

     // make note of recoverable errors present
     tiAdditionalData["recoverables"] = recoverableErrors() ? "true" : "false";

     if (nullptr != i_tiDataArea)
     {
         parsePhypOpalTiInfo(tiAdditionalData, i_tiDataArea);

         tiAdditionalData["Subsystem"] =
             std::to_string(static_cast<uint8_t>(pel::SubsystemID::hypervisor));

         // Copy all ascii src chars to additional data
         char srcChar[33]; // 32 ascii chars + null term
         memcpy(srcChar, &(i_tiDataArea->asciiData0), 32);
         srcChar[32]                  = 0;
         tiAdditionalData["SrcAscii"] = std::string{srcChar};

         // TI event
         eventTerminate(tiAdditionalData, (char*)i_tiDataArea);
     }
     else
     {
         // TI data was not available This should not happen since we provide
         // a default TI info in the case where get TI info was not successful.
         eventAttentionFail((int)AttnSection::handlePhypTi | ATTN_INFO_NULL);
     }

     // We are finished creating the event log entries so transition host to
     // the required state.
     if (true == util::dbus::dumpPolicyEnabled())
     {
         // MPIPL is considered a "dump" so we will qualify this transition with
         // the dumpPolicyEnabled property. MPIPL is triggered by by starting
         // the host "crash" target.
         util::dbus::transitionHost(util::dbus::HostState::Crash);
     }
     else
     {
         // If dumpPolicyEnabled property is disabled we will quiesce the host
         util::dbus::transitionHost(util::dbus::HostState::Quiesce);
     }
 }

 /**
  * @brief Handle a hostboot terminate immediate with SRC provided
  *
  * The TI info will contain the log ID of the event log that has already been
  * submitted by hostboot. In this case the attention handler does not need to
  * create a PEL. A hostboot dump may be requested and the host will be
  * transitioned.
  *
  * @param i_tiDataArea pointer to TI information filled in by hostboot
  */
 void handleHbTiWithEid(TiDataArea* i_tiDataArea)
 {
     trace::inf("HB TI with PLID/EID");

     if (nullptr != i_tiDataArea)
     {
         // see if HB dump is requested
         if (i_tiDataArea->hbFlags & hbDumpFlag)
         {
             // retrieve log ID from TI info data
             uint32_t logId = be32toh(i_tiDataArea->asciiData1);
             requestDump(logId, DumpParameters{0, DumpType::Hostboot});
         }
     }

     util::dbus::transitionHost(util::dbus::HostState::Quiesce);
 }

 /**
  * @brief Handle a hostboot terminate immediate with SRC provided
  *
  * The TI info will contain the reason code and additional data necessary
  * to create a PEL on behalf of hostboot. A hostboot dump may be created
  * (after generating the PEL) and the host may be transitioned depending
  * on the reason code.
  *
  * @param i_tiDataArea pointer to TI information filled in by hostboot
  */
 void handleHbTiWithSrc(TiDataArea* i_tiDataArea)
 {
     trace::inf("HB TI with SRC");

     // handle specific hostboot reason codes
     if (nullptr != i_tiDataArea)
     {
         // Reason code is byte 2 and 3 of 4 byte srcWord12HbWord0
         uint16_t reasonCode = be32toh(i_tiDataArea->srcWord12HbWord0);

         trace::inf("reason code %04x", reasonCode);

         // for clean shutdown (reason code 050B) no PEL and no dump
         if (reasonCode != HB_SRC_SHUTDOWN_REQUEST)
         {
             // gather additional data for PEL
             std::map<std::string, std::string> tiAdditionalData;

             // make note of recoverable errors present
             tiAdditionalData["recoverables"] =
                 recoverableErrors() ? "true" : "false";

             parseHbTiInfo(tiAdditionalData, i_tiDataArea);

             tiAdditionalData["Subsystem"] = std::to_string(
                 static_cast<uint8_t>(pel::SubsystemID::hostboot));

             // Translate hex src value to ascii. This results in an 8
             // character SRC (hostboot SRC is 32 bits)
             tiAdditionalData["SrcAscii"] =
                 fmt::format("{:08X}", be32toh(i_tiDataArea->srcWord12HbWord0));

             // dump flag is only valid for TI with EID (not TI with SRC)
             trace::inf("Ignoring TI info dump flag for HB TI with SRC");
             tiAdditionalData["Dump"] = "true";

             // TI with SRC will honor hbNotVisibleFlag
             if (i_tiDataArea->hbFlags & hbNotVisibleFlag)
             {
                 tiAdditionalData["hidden"] = "true";
             }

             // Generate event log
             eventTerminate(tiAdditionalData, (char*)i_tiDataArea);
         }

         if (HB_SRC_KEY_TRANSITION != reasonCode)
         {
             util::dbus::transitionHost(util::dbus::HostState::Quiesce);
         }
     }
     else
     {
         // TI data was not available, this should not happen
         eventAttentionFail((int)AttnSection::handleHbTi | ATTN_INFO_NULL);
     }
 }

 /**
  * @brief Handle a hostboot terminate immediate special attention
  *
  * The TI info data area will contain information pertaining to the TI
  * condition. The course of action to take regarding the host state will
  * depend on the contents of the TI info data area. We will also create a
  * PEL containing the TI info data and FFDC data captured in the system
  * journal.
  *
  * @param i_tiDataArea pointer to TI information filled in by hostboot
  */
 void handleHbTi(TiDataArea* i_tiDataArea)
 {
     trace::inf("HB TI");

     // handle specific hostboot reason codes
     if (nullptr != i_tiDataArea)
     {
         uint8_t terminateType = i_tiDataArea->hbTerminateType;

         if (TI_WITH_SRC == terminateType)
         {
             handleHbTiWithSrc(i_tiDataArea);
         }
         else
         {
             handleHbTiWithEid(i_tiDataArea);
         }
     }
     else
     {
         // TI data was not available, this should not happen
         eventAttentionFail((int)AttnSection::handleHbTi | ATTN_INFO_NULL);
     }
 }

 /** @brief Parse the TI info data area into map as PHYP/OPAL data */
 void parsePhypOpalTiInfo(std::map<std::string, std::string>& i_map,
                          TiDataArea* i_tiDataArea)
 {
     if (nullptr == i_tiDataArea)
     {
         return;
     }

     i_map["0x00 TI Area Valid"] =
         fmt::format("{:02x}", i_tiDataArea->tiAreaValid);
     i_map["0x01 Command"] = fmt::format("{:02x}", i_tiDataArea->command);
     i_map["0x02 Num. Data Bytes"] =
         fmt::format("{:04x}", be16toh(i_tiDataArea->numDataBytes));
     i_map["0x04 Reserved"] = fmt::format("{:02x}", i_tiDataArea->reserved1);
     i_map["0x06 HWDump Type"] =
         fmt::format("{:04x}", be16toh(i_tiDataArea->hardwareDumpType));
     i_map["0x08 SRC Format"] = fmt::format("{:02x}", i_tiDataArea->srcFormat);
     i_map["0x09 SRC Flags"]  = fmt::format("{:02x}", i_tiDataArea->srcFlags);
     i_map["0x0a Num. ASCII Words"] =
         fmt::format("{:02x}", i_tiDataArea->numAsciiWords);
     i_map["0x0b Num. Hex Words"] =
         fmt::format("{:02x}", i_tiDataArea->numHexWords);
     i_map["0x0e Length of SRC"] =
         fmt::format("{:04x}", be16toh(i_tiDataArea->lenSrc));
     i_map["0x10 SRC Word 12"] =
         fmt::format("{:08x}", be32toh(i_tiDataArea->srcWord12HbWord0));
     i_map["0x14 SRC Word 13"] =
         fmt::format("{:08x}", be32toh(i_tiDataArea->srcWord13HbWord2));
     i_map["0x18 SRC Word 14"] =
         fmt::format("{:08x}", be32toh(i_tiDataArea->srcWord14HbWord3));
     i_map["0x1c SRC Word 15"] =
         fmt::format("{:08x}", be32toh(i_tiDataArea->srcWord15HbWord4));
     i_map["0x20 SRC Word 16"] =
         fmt::format("{:08x}", be32toh(i_tiDataArea->srcWord16HbWord5));
     i_map["0x24 SRC Word 17"] =
         fmt::format("{:08x}", be32toh(i_tiDataArea->srcWord17HbWord6));
     i_map["0x28 SRC Word 18"] =
         fmt::format("{:08x}", be32toh(i_tiDataArea->srcWord18HbWord7));
     i_map["0x2c SRC Word 19"] =
         fmt::format("{:08x}", be32toh(i_tiDataArea->srcWord19HbWord8));
     i_map["0x30 ASCII Data"] =
         fmt::format("{:08x}", be32toh(i_tiDataArea->asciiData0));
     i_map["0x34 ASCII Data"] =
         fmt::format("{:08x}", be32toh(i_tiDataArea->asciiData1));
     i_map["0x38 ASCII Data"] =
         fmt::format("{:08x}", be32toh(i_tiDataArea->asciiData2));
     i_map["0x3c ASCII Data"] =
         fmt::format("{:08x}", be32toh(i_tiDataArea->asciiData3));
     i_map["0x40 ASCII Data"] =
         fmt::format("{:08x}", be32toh(i_tiDataArea->asciiData4));
     i_map["0x44 ASCII Data"] =
         fmt::format("{:08x}", be32toh(i_tiDataArea->asciiData5));
     i_map["0x48 ASCII Data"] =
         fmt::format("{:08x}", be32toh(i_tiDataArea->asciiData6));
     i_map["0x4c ASCII Data"] =
         fmt::format("{:08x}", be32toh(i_tiDataArea->asciiData7));
     i_map["0x50 Location"] = fmt::format("{:02x}", i_tiDataArea->location);
     i_map["0x51 Code Sections"] =
         fmt::format("{:02x}", i_tiDataArea->codeSection);
     i_map["0x52 Additional Size"] =
         fmt::format("{:02x}", i_tiDataArea->additionalSize);
     i_map["0x53 Additional Data"] =
         fmt::format("{:02x}", i_tiDataArea->andData);
 }

 /** @brief Parse the TI info data area into map as hostboot data */
 void parseHbTiInfo(std::map<std::string, std::string>& i_map,
                    TiDataArea* i_tiDataArea)
 {
     if (nullptr == i_tiDataArea)
     {
         return;
     }

     i_map["0x00 TI Area Valid"] =
         fmt::format("{:02x}", i_tiDataArea->tiAreaValid);
     i_map["0x04 Reserved"] = fmt::format("{:02x}", i_tiDataArea->reserved1);
     i_map["0x05 HB_Term. Type"] =
         fmt::format("{:02x}", i_tiDataArea->hbTerminateType);
     i_map["0x0c HB Flags"] = fmt::format("{:02x}", i_tiDataArea->hbFlags);
     i_map["0x0d Source"]   = fmt::format("{:02x}", i_tiDataArea->source);
     i_map["0x10 HB Word 0"] =
         fmt::format("{:08x}", be32toh(i_tiDataArea->srcWord12HbWord0));
     i_map["0x14 HB Word 2"] =
         fmt::format("{:08x}", be32toh(i_tiDataArea->srcWord13HbWord2));
     i_map["0x18 HB Word 3"] =
         fmt::format("{:08x}", be32toh(i_tiDataArea->srcWord14HbWord3));
     i_map["0x1c HB Word 4"] =
         fmt::format("{:08x}", be32toh(i_tiDataArea->srcWord15HbWord4));
     i_map["0x20 HB Word 5"] =
         fmt::format("{:08x}", be32toh(i_tiDataArea->srcWord16HbWord5));
     i_map["0x24 HB Word 6"] =
         fmt::format("{:08x}", be32toh(i_tiDataArea->srcWord17HbWord6));
     i_map["0x28 HB Word 7"] =
         fmt::format("{:08x}", be32toh(i_tiDataArea->srcWord18HbWord7));
     i_map["0x2c HB Word 8"] =
         fmt::format("{:08x}", be32toh(i_tiDataArea->srcWord19HbWord8));
     i_map["0x30 error_data"] =
         fmt::format("{:08x}", be32toh(i_tiDataArea->asciiData0));
     i_map["0x34 EID"] =
         fmt::format("{:08x}", be32toh(i_tiDataArea->asciiData1));
 }

 } // namespace attn
	#include <fmt/format.h>

	#include <attn/attn_common.hpp>
	#include <attn/attn_dbus.hpp>
	#include <attn/attn_dump.hpp>
	#include <attn/attn_logging.hpp>
	#include <attn/pel/pel_common.hpp>
	#include <attn/ti_handler.hpp>
	#include <sdbusplus/bus.hpp>
	#include <sdbusplus/exception.hpp>
	#include <util/dbus.hpp>
	#include <util/trace.hpp>

	#include <iomanip>
	#include <iostream>

	namespace attn
	{

	/**
	* @brief Determine if this is a HB or PHYP TI event
	*
	* Use the TI info data area to determine if this is either a HB or a PHYP
	* TI event then handle the event.
	*
	* @param i_tiDataArea pointer to the TI info data
	*/
	int tiHandler(TiDataArea* i_tiDataArea)
	{
	int rc = RC_SUCCESS;

	// capture some additional data for logs/traces
	addHbStatusRegs();

	// check TI data area if it is available
	if (nullptr != i_tiDataArea)
	{
	// HB v. PHYP TI logic: Only hosboot will fill in hbTerminateType
	// and it will be non-zero. Only hostboot will fill out source and
	// it it will be non-zero. Only PHYP will fill in srcFormat and it
	// will be non-zero.
	if ((0 == i_tiDataArea->hbTerminateType) &&
	(0 == i_tiDataArea->source) && (0 != i_tiDataArea->srcFormat))
	{
	handlePhypTi(i_tiDataArea);
	}
	else
	{
	handleHbTi(i_tiDataArea);
	}
	}
	else
	{
	// TI data was not available This should not happen since we provide
	// a default TI info in the case where get TI info was not successful.
	eventAttentionFail((int)AttnSection::tiHandler \| ATTN_INFO_NULL);
	rc = RC_NOT_HANDLED;
	}

	return rc;
	}

	/**
	* @brief Handle a PHYP terminate immediate special attention
	*
	* The TI info data area will contain information pertaining to the TI
	* condition. We will wither quiesce the host or initiate a MPIPL depending
	* depending on the auto reboot configuration. We will also create a PEL which
	* will contain the TI info data and FFDC data captured in the system journal.
	*
	* @param i_tiDataArea pointer to TI information filled in by hostboot
	*/
	void handlePhypTi(TiDataArea* i_tiDataArea)
	{
	trace::inf("PHYP TI");

	// gather additional data for PEL
	std::map<std::string, std::string> tiAdditionalData;

	// make note of recoverable errors present
	tiAdditionalData["recoverables"] = recoverableErrors() ? "true" : "false";

	if (nullptr != i_tiDataArea)
	{
	parsePhypOpalTiInfo(tiAdditionalData, i_tiDataArea);

	tiAdditionalData["Subsystem"] =
	std::to_string(static_cast<uint8_t>(pel::SubsystemID::hypervisor));

	// Copy all ascii src chars to additional data
	char srcChar[33]; // 32 ascii chars + null term
	memcpy(srcChar, &(i_tiDataArea->asciiData0), 32);
	srcChar[32] = 0;
	tiAdditionalData["SrcAscii"] = std::string{srcChar};

	// TI event
	eventTerminate(tiAdditionalData, (char*)i_tiDataArea);
	}
	else
	{
	// TI data was not available This should not happen since we provide
	// a default TI info in the case where get TI info was not successful.
	eventAttentionFail((int)AttnSection::handlePhypTi \| ATTN_INFO_NULL);
	}

	// We are finished creating the event log entries so transition host to
	// the required state.
	if (true == util::dbus::dumpPolicyEnabled())
	{
	// MPIPL is considered a "dump" so we will qualify this transition with
	// the dumpPolicyEnabled property. MPIPL is triggered by by starting
	// the host "crash" target.
	util::dbus::transitionHost(util::dbus::HostState::Crash);
	}
	else
	{
	// If dumpPolicyEnabled property is disabled we will quiesce the host
	util::dbus::transitionHost(util::dbus::HostState::Quiesce);
	}
	}

	/**
	* @brief Handle a hostboot terminate immediate with SRC provided
	*
	* The TI info will contain the log ID of the event log that has already been
	* submitted by hostboot. In this case the attention handler does not need to
	* create a PEL. A hostboot dump may be requested and the host will be
	* transitioned.
	*
	* @param i_tiDataArea pointer to TI information filled in by hostboot
	*/
	void handleHbTiWithEid(TiDataArea* i_tiDataArea)
	{
	trace::inf("HB TI with PLID/EID");

	if (nullptr != i_tiDataArea)
	{
	// see if HB dump is requested
	if (i_tiDataArea->hbFlags & hbDumpFlag)
	{
	// retrieve log ID from TI info data
	uint32_t logId = be32toh(i_tiDataArea->asciiData1);
	requestDump(logId, DumpParameters{0, DumpType::Hostboot});
	}
	}

	util::dbus::transitionHost(util::dbus::HostState::Quiesce);
	}

	/**
	* @brief Handle a hostboot terminate immediate with SRC provided
	*
	* The TI info will contain the reason code and additional data necessary
	* to create a PEL on behalf of hostboot. A hostboot dump may be created
	* (after generating the PEL) and the host may be transitioned depending
	* on the reason code.
	*
	* @param i_tiDataArea pointer to TI information filled in by hostboot
	*/
	void handleHbTiWithSrc(TiDataArea* i_tiDataArea)
	{
	trace::inf("HB TI with SRC");

	// handle specific hostboot reason codes
	if (nullptr != i_tiDataArea)
	{
	// Reason code is byte 2 and 3 of 4 byte srcWord12HbWord0
	uint16_t reasonCode = be32toh(i_tiDataArea->srcWord12HbWord0);

	trace::inf("reason code %04x", reasonCode);

	// for clean shutdown (reason code 050B) no PEL and no dump
	if (reasonCode != HB_SRC_SHUTDOWN_REQUEST)
	{
	// gather additional data for PEL
	std::map<std::string, std::string> tiAdditionalData;

	// make note of recoverable errors present
	tiAdditionalData["recoverables"] =
	recoverableErrors() ? "true" : "false";

	parseHbTiInfo(tiAdditionalData, i_tiDataArea);

	tiAdditionalData["Subsystem"] = std::to_string(
	static_cast<uint8_t>(pel::SubsystemID::hostboot));

	// Translate hex src value to ascii. This results in an 8
	// character SRC (hostboot SRC is 32 bits)
	tiAdditionalData["SrcAscii"] =
	fmt::format("{:08X}", be32toh(i_tiDataArea->srcWord12HbWord0));

	// dump flag is only valid for TI with EID (not TI with SRC)
	trace::inf("Ignoring TI info dump flag for HB TI with SRC");
	tiAdditionalData["Dump"] = "true";

	// TI with SRC will honor hbNotVisibleFlag
	if (i_tiDataArea->hbFlags & hbNotVisibleFlag)
	{
	tiAdditionalData["hidden"] = "true";
	}

	// Generate event log
	eventTerminate(tiAdditionalData, (char*)i_tiDataArea);
	}

	if (HB_SRC_KEY_TRANSITION != reasonCode)
	{
	util::dbus::transitionHost(util::dbus::HostState::Quiesce);
	}
	}
	else
	{
	// TI data was not available, this should not happen
	eventAttentionFail((int)AttnSection::handleHbTi \| ATTN_INFO_NULL);
	}
	}

	/**
	* @brief Handle a hostboot terminate immediate special attention
	*
	* The TI info data area will contain information pertaining to the TI
	* condition. The course of action to take regarding the host state will
	* depend on the contents of the TI info data area. We will also create a
	* PEL containing the TI info data and FFDC data captured in the system
	* journal.
	*
	* @param i_tiDataArea pointer to TI information filled in by hostboot
	*/
	void handleHbTi(TiDataArea* i_tiDataArea)
	{
	trace::inf("HB TI");

	// handle specific hostboot reason codes
	if (nullptr != i_tiDataArea)
	{
	uint8_t terminateType = i_tiDataArea->hbTerminateType;

	if (TI_WITH_SRC == terminateType)
	{
	handleHbTiWithSrc(i_tiDataArea);
	}
	else
	{
	handleHbTiWithEid(i_tiDataArea);
	}
	}
	else
	{
	// TI data was not available, this should not happen
	eventAttentionFail((int)AttnSection::handleHbTi \| ATTN_INFO_NULL);
	}
	}

	/** @brief Parse the TI info data area into map as PHYP/OPAL data */
	void parsePhypOpalTiInfo(std::map<std::string, std::string>& i_map,
	TiDataArea* i_tiDataArea)
	{
	if (nullptr == i_tiDataArea)
	{
	return;
	}

	i_map["0x00 TI Area Valid"] =
	fmt::format("{:02x}", i_tiDataArea->tiAreaValid);
	i_map["0x01 Command"] = fmt::format("{:02x}", i_tiDataArea->command);
	i_map["0x02 Num. Data Bytes"] =
	fmt::format("{:04x}", be16toh(i_tiDataArea->numDataBytes));
	i_map["0x04 Reserved"] = fmt::format("{:02x}", i_tiDataArea->reserved1);
	i_map["0x06 HWDump Type"] =
	fmt::format("{:04x}", be16toh(i_tiDataArea->hardwareDumpType));
	i_map["0x08 SRC Format"] = fmt::format("{:02x}", i_tiDataArea->srcFormat);
	i_map["0x09 SRC Flags"] = fmt::format("{:02x}", i_tiDataArea->srcFlags);
	i_map["0x0a Num. ASCII Words"] =
	fmt::format("{:02x}", i_tiDataArea->numAsciiWords);
	i_map["0x0b Num. Hex Words"] =
	fmt::format("{:02x}", i_tiDataArea->numHexWords);
	i_map["0x0e Length of SRC"] =
	fmt::format("{:04x}", be16toh(i_tiDataArea->lenSrc));
	i_map["0x10 SRC Word 12"] =
	fmt::format("{:08x}", be32toh(i_tiDataArea->srcWord12HbWord0));
	i_map["0x14 SRC Word 13"] =
	fmt::format("{:08x}", be32toh(i_tiDataArea->srcWord13HbWord2));
	i_map["0x18 SRC Word 14"] =
	fmt::format("{:08x}", be32toh(i_tiDataArea->srcWord14HbWord3));
	i_map["0x1c SRC Word 15"] =
	fmt::format("{:08x}", be32toh(i_tiDataArea->srcWord15HbWord4));
	i_map["0x20 SRC Word 16"] =
	fmt::format("{:08x}", be32toh(i_tiDataArea->srcWord16HbWord5));
	i_map["0x24 SRC Word 17"] =
	fmt::format("{:08x}", be32toh(i_tiDataArea->srcWord17HbWord6));
	i_map["0x28 SRC Word 18"] =
	fmt::format("{:08x}", be32toh(i_tiDataArea->srcWord18HbWord7));
	i_map["0x2c SRC Word 19"] =
	fmt::format("{:08x}", be32toh(i_tiDataArea->srcWord19HbWord8));
	i_map["0x30 ASCII Data"] =
	fmt::format("{:08x}", be32toh(i_tiDataArea->asciiData0));
	i_map["0x34 ASCII Data"] =
	fmt::format("{:08x}", be32toh(i_tiDataArea->asciiData1));
	i_map["0x38 ASCII Data"] =
	fmt::format("{:08x}", be32toh(i_tiDataArea->asciiData2));
	i_map["0x3c ASCII Data"] =
	fmt::format("{:08x}", be32toh(i_tiDataArea->asciiData3));
	i_map["0x40 ASCII Data"] =
	fmt::format("{:08x}", be32toh(i_tiDataArea->asciiData4));
	i_map["0x44 ASCII Data"] =
	fmt::format("{:08x}", be32toh(i_tiDataArea->asciiData5));
	i_map["0x48 ASCII Data"] =
	fmt::format("{:08x}", be32toh(i_tiDataArea->asciiData6));
	i_map["0x4c ASCII Data"] =
	fmt::format("{:08x}", be32toh(i_tiDataArea->asciiData7));
	i_map["0x50 Location"] = fmt::format("{:02x}", i_tiDataArea->location);
	i_map["0x51 Code Sections"] =
	fmt::format("{:02x}", i_tiDataArea->codeSection);
	i_map["0x52 Additional Size"] =
	fmt::format("{:02x}", i_tiDataArea->additionalSize);
	i_map["0x53 Additional Data"] =
	fmt::format("{:02x}", i_tiDataArea->andData);
	}

	/** @brief Parse the TI info data area into map as hostboot data */
	void parseHbTiInfo(std::map<std::string, std::string>& i_map,
	TiDataArea* i_tiDataArea)
	{
	if (nullptr == i_tiDataArea)
	{
	return;
	}

	i_map["0x00 TI Area Valid"] =
	fmt::format("{:02x}", i_tiDataArea->tiAreaValid);
	i_map["0x04 Reserved"] = fmt::format("{:02x}", i_tiDataArea->reserved1);
	i_map["0x05 HB_Term. Type"] =
	fmt::format("{:02x}", i_tiDataArea->hbTerminateType);
	i_map["0x0c HB Flags"] = fmt::format("{:02x}", i_tiDataArea->hbFlags);
	i_map["0x0d Source"] = fmt::format("{:02x}", i_tiDataArea->source);
	i_map["0x10 HB Word 0"] =
	fmt::format("{:08x}", be32toh(i_tiDataArea->srcWord12HbWord0));
	i_map["0x14 HB Word 2"] =
	fmt::format("{:08x}", be32toh(i_tiDataArea->srcWord13HbWord2));
	i_map["0x18 HB Word 3"] =
	fmt::format("{:08x}", be32toh(i_tiDataArea->srcWord14HbWord3));
	i_map["0x1c HB Word 4"] =
	fmt::format("{:08x}", be32toh(i_tiDataArea->srcWord15HbWord4));
	i_map["0x20 HB Word 5"] =
	fmt::format("{:08x}", be32toh(i_tiDataArea->srcWord16HbWord5));
	i_map["0x24 HB Word 6"] =
	fmt::format("{:08x}", be32toh(i_tiDataArea->srcWord17HbWord6));
	i_map["0x28 HB Word 7"] =
	fmt::format("{:08x}", be32toh(i_tiDataArea->srcWord18HbWord7));
	i_map["0x2c HB Word 8"] =
	fmt::format("{:08x}", be32toh(i_tiDataArea->srcWord19HbWord8));
	i_map["0x30 error_data"] =
	fmt::format("{:08x}", be32toh(i_tiDataArea->asciiData0));
	i_map["0x34 EID"] =
	fmt::format("{:08x}", be32toh(i_tiDataArea->asciiData1));
	}

	} // namespace attn