| { |
| "version": 1, |
| "model_ec": ["P10_10"], |
| "registers": { |
| "PAU_FIR_2": { |
| "instances": { |
| "0": "0x10010C80", |
| "3": "0x11010C80", |
| "4": "0x12010C80", |
| "5": "0x12011480", |
| "6": "0x13010C80", |
| "7": "0x13011480" |
| } |
| }, |
| "PAU_FIR_2_MASK": { |
| "instances": { |
| "0": "0x10010C83", |
| "3": "0x11010C83", |
| "4": "0x12010C83", |
| "5": "0x12011483", |
| "6": "0x13010C83", |
| "7": "0x13011483" |
| } |
| }, |
| "PAU_FIR_2_ACT0": { |
| "instances": { |
| "0": "0x10010C86", |
| "3": "0x11010C86", |
| "4": "0x12010C86", |
| "5": "0x12011486", |
| "6": "0x13010C86", |
| "7": "0x13011486" |
| } |
| }, |
| "PAU_FIR_2_ACT1": { |
| "instances": { |
| "0": "0x10010C87", |
| "3": "0x11010C87", |
| "4": "0x12010C87", |
| "5": "0x12011487", |
| "6": "0x13010C87", |
| "7": "0x13011487" |
| } |
| } |
| }, |
| "isolation_nodes": { |
| "PAU_FIR_2": { |
| "instances": [0, 3, 4, 5, 6, 7], |
| "rules": [ |
| { |
| "attn_type": ["CS"], |
| "node_inst": [0, 3, 4, 5, 6, 7], |
| "expr": { |
| "expr_type": "and", |
| "exprs": [ |
| { |
| "expr_type": "reg", |
| "reg_name": "PAU_FIR_2" |
| }, |
| { |
| "expr_type": "not", |
| "expr": { |
| "expr_type": "reg", |
| "reg_name": "PAU_FIR_2_MASK" |
| } |
| }, |
| { |
| "expr_type": "not", |
| "expr": { |
| "expr_type": "reg", |
| "reg_name": "PAU_FIR_2_ACT0" |
| } |
| }, |
| { |
| "expr_type": "not", |
| "expr": { |
| "expr_type": "reg", |
| "reg_name": "PAU_FIR_2_ACT1" |
| } |
| } |
| ] |
| } |
| }, |
| { |
| "attn_type": ["RE"], |
| "node_inst": [0, 3, 4, 5, 6, 7], |
| "expr": { |
| "expr_type": "and", |
| "exprs": [ |
| { |
| "expr_type": "reg", |
| "reg_name": "PAU_FIR_2" |
| }, |
| { |
| "expr_type": "not", |
| "expr": { |
| "expr_type": "reg", |
| "reg_name": "PAU_FIR_2_MASK" |
| } |
| }, |
| { |
| "expr_type": "not", |
| "expr": { |
| "expr_type": "reg", |
| "reg_name": "PAU_FIR_2_ACT0" |
| } |
| }, |
| { |
| "expr_type": "reg", |
| "reg_name": "PAU_FIR_2_ACT1" |
| } |
| ] |
| } |
| }, |
| { |
| "attn_type": ["UCS"], |
| "node_inst": [0, 3, 4, 5, 6, 7], |
| "expr": { |
| "expr_type": "and", |
| "exprs": [ |
| { |
| "expr_type": "reg", |
| "reg_name": "PAU_FIR_2" |
| }, |
| { |
| "expr_type": "not", |
| "expr": { |
| "expr_type": "reg", |
| "reg_name": "PAU_FIR_2_MASK" |
| } |
| }, |
| { |
| "expr_type": "reg", |
| "reg_name": "PAU_FIR_2_ACT0" |
| }, |
| { |
| "expr_type": "reg", |
| "reg_name": "PAU_FIR_2_ACT1" |
| } |
| ] |
| } |
| } |
| ], |
| "bits": { |
| "0": { |
| "desc": "OTL Brick2 translation fault" |
| }, |
| "1": { |
| "desc": "OTL Brick3 translation fault" |
| }, |
| "2": { |
| "desc": "OTL Brick4 translation fault" |
| }, |
| "3": { |
| "desc": "OTL Brick5 translation fault" |
| }, |
| "4": { |
| "desc": "OTL TL credit counter overflow caused by return_tl_credits" |
| }, |
| "5": { |
| "desc": "OTL RX acTag specified in a command is outside the configured specification set" |
| }, |
| "6": { |
| "desc": "OTL RX acTag specified in the command points to an invalid entry" |
| }, |
| "7": { |
| "desc": "OTL RX reserved opcode used" |
| }, |
| "8": { |
| "desc": "OTL RX return_tl_credit command found outside slot0" |
| }, |
| "9": { |
| "desc": "OTL RX bad opcode and template combination" |
| }, |
| "10": { |
| "desc": "OTL RX unsupported template format" |
| }, |
| "11": { |
| "desc": "OTL RX bad template x00 format" |
| }, |
| "12": { |
| "desc": "OTL RX control flit overrun" |
| }, |
| "13": { |
| "desc": "OTL RX unexpected data flit" |
| }, |
| "14": { |
| "desc": "OTL RX DL link down" |
| }, |
| "15": { |
| "desc": "OTL RX bad data received on command" |
| }, |
| "16": { |
| "desc": "OTL RX bad data received on response" |
| }, |
| "17": { |
| "desc": "OTL RX AP response not allowed (CAPPTag not recognized)" |
| }, |
| "18": { |
| "desc": "OR of all OTL parity errors" |
| }, |
| "19": { |
| "desc": "OR of all OTL ECC CE errors" |
| }, |
| "20": { |
| "desc": "OR of all OTL ECC UE errors" |
| }, |
| "21": { |
| "desc": "RXO OP Errors" |
| }, |
| "22": { |
| "desc": "RXO Internal Errors" |
| }, |
| "23": { |
| "desc": "OTL RXI fifo overrun" |
| }, |
| "24": { |
| "desc": "OTL RXI control flit data run length invalid" |
| }, |
| "25": { |
| "desc": "OTL RXI opcode utilizing dLength specifies dL=0b00 or other invalid dL" |
| }, |
| "26": { |
| "desc": "OTL RXI bad data received vc2" |
| }, |
| "27": { |
| "desc": "OTL RXI dcp2 fifo overrun" |
| }, |
| "28": { |
| "desc": "OTL RXI vc1 fifo overrun" |
| }, |
| "29": { |
| "desc": "OTL RXI vc2 fifo overrun" |
| }, |
| "30": { |
| "desc": "Opcode data length not supported" |
| }, |
| "31": { |
| "desc": "OTL TXI opcode error" |
| }, |
| "32": { |
| "desc": "malformed packet error type 4 (rxi_misc_error_fieldrsvdne0_tlvc2)" |
| }, |
| "33": { |
| "desc": "OTL Happi no bar match" |
| }, |
| "34": { |
| "desc": "OTL Reserved, macro bit 30" |
| }, |
| "35": { |
| "desc": "OTL Reserved, macro bit 31" |
| }, |
| "36": { |
| "desc": "MMIO invalidate requested while one is in progress" |
| }, |
| "37": { |
| "desc": "Unexpected ITAG returned on itag completion port 0" |
| }, |
| "38": { |
| "desc": "Unexpected ITAG returned on itag completion port 1" |
| }, |
| "39": { |
| "desc": "Unexpected Read PEE completion" |
| }, |
| "40": { |
| "desc": "Unexpected Checkout response" |
| }, |
| "41": { |
| "desc": "Translation request while SPAP is invalid" |
| }, |
| "42": { |
| "desc": "Read a PEE which was not valid" |
| }, |
| "43": { |
| "desc": "Bloom filter protection error" |
| }, |
| "44": { |
| "desc": "Translation request to non-valid TA" |
| }, |
| "45": { |
| "desc": "TA Translation request to an invalid TA" |
| }, |
| "46": { |
| "desc": "correctable array error (SBE)" |
| }, |
| "47": { |
| "desc": "uncorrectable array error (UE or parity)" |
| }, |
| "48": { |
| "desc": "S/TLBI buffer overflow" |
| }, |
| "49": { |
| "desc": "SBE correctable error on Powerbus checkout response data or Powerbus PEE read data" |
| }, |
| "50": { |
| "desc": "UE uncorrectable error on Powerbus checkout response data or Powerbus PEE read data" |
| }, |
| "51": { |
| "desc": "SUE error on Powerbus checkout response data or Powerbus PEE read data" |
| }, |
| "52": { |
| "desc": "PA mem_hit when bar mode is nonzero" |
| }, |
| "53": { |
| "desc": "XSL Reserved, macro bit 17" |
| }, |
| "54": { |
| "desc": "OTL Brick0 translation fault" |
| }, |
| "55": { |
| "desc": "OTL Brick1 translation fault" |
| }, |
| "56": { |
| "desc": "AME ECC UE on control information or state bit errors that are contained within AME and ATL" |
| }, |
| "57": { |
| "desc": "AME ECC UE on control information or state bit errors that can affect correctness of external logic such as XSL castout" |
| }, |
| "58": { |
| "desc": "AME Logic errors that are contained within AME and ATL" |
| }, |
| "59": { |
| "desc": "AME Logic errors that can affect correctness of external logic such as XSL castout" |
| }, |
| "60": { |
| "desc": "AME firmware-detected fatal error conditions" |
| }, |
| "61": { |
| "desc": "AME Reserved" |
| }, |
| "62": { |
| "desc": "Unused FIR" |
| }, |
| "63": { |
| "desc": "Unused FIR" |
| } |
| } |
| } |
| } |
| } |